feat(ssa refactor): mem2reg opt pass

crates/noirc_evaluator/src/ssa_refactor/ir/basic_block.rs

@@ -96,10 +96,8 @@ impl BasicBlock {
 
     /// Removes the given instruction from this block if present or panics otherwise.
     pub(crate) fn remove_instruction(&mut self, instruction: InstructionId) {
-        // Iterate in reverse here as an optimization since remove_instruction is most
-        // often called to remove instructions at the end of a block.
         let index =
-            self.instructions.iter().rev().position(|id| *id == instruction).unwrap_or_else(|| {
+            self.instructions.iter().position(|id| *id == instruction).unwrap_or_else(|| {
                 panic!("remove_instruction: No such instruction {instruction:?} in block")
             });
         self.instructions.remove(index);

crates/noirc_evaluator/src/ssa_refactor/ir/dfg.rs

@@ -269,6 +269,15 @@ impl DataFlowGraph {
     ) {
         self.blocks[block].set_terminator(terminator);
     }
+
+    /// Replaces the value specified by the given ValueId with a new Value.
+    ///
+    /// This is the preferred method to call for optimizations simplifying
+    /// values since other instructions referring to the same ValueId need
+    /// not be modified to refer to a new ValueId.
+    pub(crate) fn set_value(&mut self, value_id: ValueId, new_value: Value) {
+        self.values[value_id] = new_value;
+    }
 }
 
 impl std::ops::Index<InstructionId> for DataFlowGraph {

crates/noirc_evaluator/src/ssa_refactor/opt/mem2reg.rs

@@ -0,0 +1,326 @@
+//! mem2reg implements a pass for promoting values stored in memory to values in registers where
+//! possible. This is particularly important for converting our memory-based representation of
+//! mutable variables into values that are easier to manipulate.
+use std::collections::{BTreeMap, BTreeSet};
+
+use crate::ssa_refactor::{
+    ir::{
+        basic_block::BasicBlockId,
+        constant::NumericConstantId,
+        dfg::DataFlowGraph,
+        instruction::{BinaryOp, Instruction, InstructionId},
+        value::{Value, ValueId},
+    },
+    ssa_gen::Ssa,
+};
+
+impl Ssa {
+    /// Attempts to remove any load instructions that recover values that already available in
+    /// scope, and attempts to remove store that are subsequently redundant, as long as they are
+    /// not stores on memory that will be passed into a function call.
+    ///
+    /// This pass assumes that the whole program has been inlined into a single block, such that
+    /// we can be sure that store instructions cannot have side effects outside of this block
+    /// (apart from intrinsic function calls).
+    ///
+    /// This pass also assumes that constant folding has been run, such that all addresses given
+    /// as input to store/load instructions are represented as one of:
+    /// - a value that directly resolves to an allocate instruction
+    /// - a value that directly resolves to a binary add instruction which has a allocate
+    /// instruction and a numeric constant as its operands
+    pub(crate) fn mem2reg_final(mut self) -> Ssa {
+        let func = self.main_mut();
+        assert_eq!(func.dfg.basic_blocks_iter().count(), 1);
+        let block_id = func.entry_block();
+        PerBlockContext::new(&mut func.dfg, block_id).eliminate_store_load();
+        self
+    }
+}
+
+#[derive(PartialEq, PartialOrd, Eq, Ord)]
+enum Address {
+    Zeroth(InstructionId),
+    Offset(InstructionId, NumericConstantId),
+}
+
+impl Address {
+    fn alloc_id(&self) -> InstructionId {
+        match self {
+            Address::Zeroth(alloc_id) => *alloc_id,
+            Address::Offset(alloc_id, _) => *alloc_id,
+        }
+    }
+}
+
+struct PerBlockContext<'dfg> {
+    dfg: &'dfg mut DataFlowGraph,
+    block_id: BasicBlockId,
+}
+
+impl<'dfg> PerBlockContext<'dfg> {
+    fn new(dfg: &'dfg mut DataFlowGraph, block_id: BasicBlockId) -> Self {
+        PerBlockContext { dfg, block_id }
+    }
+
+    // Attempts to remove redundant load & store instructions for constant addresses. Returns the
+    // count of remaining store instructions.
+    //
+    // This method assumes the entire program is now represented in a single block (minus any
+    // intrinsic function calls). Therefore we needn't be concerned with store instructions having
+    // an effect beyond the scope of this block.
+    fn eliminate_store_load(&mut self) -> u32 {
+        let mut store_count: u32 = 0;
+        let mut last_stores: BTreeMap<Address, ValueId> = BTreeMap::new();
+        let mut loads_to_substitute: Vec<(InstructionId, Value)> = Vec::new();
+        let mut store_ids: Vec<InstructionId> = Vec::new();
+        let mut failed_substitutes: BTreeSet<Address> = BTreeSet::new();
+        let mut alloc_ids_in_calls: BTreeSet<InstructionId> = BTreeSet::new();
+
+        let block = &self.dfg[self.block_id];
+        for instruction_id in block.instructions() {
+            match &self.dfg[*instruction_id] {
+                Instruction::Store { address, value } => {
+                    store_count += 1;
+                    if let Some(address) = self.try_const_address(*address) {
+                        // We can only track the address if it is a constant offset from an
+                        // allocation. A previous constant folding pass should make such addresses
+                        // possible to identify.
+                        last_stores.insert(address, *value);
+                    }
+                    // TODO: Consider if it's worth falling back to storing addresses by their
+                    // value id such we can shallowly check for dynamic address reuse.
+                    store_ids.push(*instruction_id);
+                }
+                Instruction::Load { address } => {
+                    if let Some(address) = self.try_const_address(*address) {
+                        if let Some(last_value) = last_stores.get(&address) {
+                            let last_value = self.dfg[*last_value];
+                            loads_to_substitute.push((*instruction_id, last_value));
+                        } else {
+                            failed_substitutes.insert(address);
+                        }
+                    }
+                }
+                Instruction::Call { arguments, .. } => {
+                    for arg in arguments {
+                        if let Some(address) = self.try_const_address(*arg) {
+                            alloc_ids_in_calls.insert(address.alloc_id());
+                        }
+                    }
+                }
+                _ => {
+                    // Nothing to do
+                }
+            }
+        }
+
+        // Substitute load result values
+        for (instruction_id, new_value) in &loads_to_substitute {
+            let result_value = *self
+                .dfg
+                .instruction_results(*instruction_id)
+                .first()
+                .expect("ICE: Load instructions should have single result");
+            self.dfg.set_value(result_value, *new_value);
+        }
+
+        // Delete load instructions
+        // TODO: should we let DCE do this instead?
+        let block = &mut self.dfg[self.block_id];
+        for (instruction_id, _) in loads_to_substitute {
+            block.remove_instruction(instruction_id);
+        }
+
+        // Scan for unused stores
+        let mut stores_to_remove: Vec<InstructionId> = Vec::new();
+        for instruction_id in store_ids {
+            let address = match &self.dfg[instruction_id] {
+                Instruction::Store { address, .. } => *address,
+                _ => unreachable!("store_ids should contain only store instructions"),
+            };
+            if let Some(address) = self.try_const_address(address) {
+                if !failed_substitutes.contains(&address)
+                    && !alloc_ids_in_calls.contains(&address.alloc_id())
+                {
+                    stores_to_remove.push(instruction_id);
+                }
+            }
+        }
+
+        // Delete unused stores
+        let block = &mut self.dfg[self.block_id];
+        for instruction_id in stores_to_remove {
+            store_count -= 1;
+            block.remove_instruction(instruction_id);
+        }
+
+        store_count
+    }
+
+    // Attempts to normalize the given value into a const address
+    fn try_const_address(&self, value_id: ValueId) -> Option<Address> {
+        let value = &self.dfg[value_id];
+        let instruction_id = match value {
+            Value::Instruction { instruction, .. } => *instruction,
+            _ => return None,
+        };
+        let instruction = &self.dfg[instruction_id];
+        match instruction {
+            Instruction::Allocate { .. } => Some(Address::Zeroth(instruction_id)),
+            Instruction::Binary(binary) => {
+                if binary.operator != BinaryOp::Add {
+                    return None;
+                }
+                let lhs = &self.dfg[binary.lhs];
+                let rhs = &self.dfg[binary.rhs];
+                self.try_const_address_offset(lhs, rhs)
+                    .or_else(|| self.try_const_address_offset(rhs, lhs))
+            }
+            _ => None,
+        }
+    }
+
+    // Tries val1 as an allocation instruction id and val2 as a constant offset
+    fn try_const_address_offset(&self, val1: &Value, val2: &Value) -> Option<Address> {
+        let alloc_id = match val1 {
+            Value::Instruction { instruction, .. } => match &self.dfg[*instruction] {
+                Instruction::Allocate { .. } => *instruction,
+                _ => return None,
+            },
+            _ => return None,
+        };
+        if let Value::NumericConstant { constant, .. } = val2 {
+            Some(Address::Offset(alloc_id, *constant))
+        } else {
+            None
+        }
+    }
+}
+
+#[cfg(test)]
+mod tests {
+    use acvm::FieldElement;
+
+    use crate::ssa_refactor::{
+        ir::{
+            instruction::{BinaryOp, Instruction, Intrinsic, TerminatorInstruction},
+            map::Id,
+            types::Type,
+        },
+        ssa_builder::FunctionBuilder,
+    };
+
+    use super::PerBlockContext;
+
+    #[test]
+    fn test_simple() {
+        // func() {
+        //   block0():
+        //     v0 = alloc 2
+        //     v1 = add v0, Field 1
+        //     store v1, Field 1
+        //     v2 = add v0, Field 1
+        //     v3 = load v1
+        //     return v3
+
+        let func_id = Id::test_new(0);
+        let mut builder = FunctionBuilder::new("func".into(), func_id);
+        let v0 = builder.insert_allocate(2);
+        let const_one = builder.field_constant(FieldElement::one());
+        let v1 = builder.insert_binary(v0, BinaryOp::Add, const_one);
+        builder.insert_store(v1, const_one);
+        // v2 is created internally by builder.insert_load
+        let v3 = builder.insert_load(v0, const_one, Type::field());
+        builder.terminate_with_return(vec![v3]);
+
+        let mut ssa = builder.finish();
+
+        let mut func = ssa.functions.remove(&func_id).unwrap();
+        let block_id = func.entry_block();
+
+        let mut mem2reg_context = PerBlockContext::new(&mut func.dfg, block_id);
+        let remaining_stores = mem2reg_context.eliminate_store_load();
+
+        assert_eq!(remaining_stores, 0);
+
+        let block = &func.dfg[block_id];
+        let load_count = block
+            .instructions()
+            .iter()
+            .filter(|instruction_id| matches!(func.dfg[**instruction_id], Instruction::Load { .. }))
+            .count();
+        assert_eq!(load_count, 0);
+        let store_count = block
+            .instructions()
+            .iter()
+            .filter(|instruction_id| {
+                matches!(func.dfg[**instruction_id], Instruction::Store { .. })
+            })
+            .count();
+        assert_eq!(store_count, 0);
+        let ret_val_id = match block.terminator().unwrap() {
+            TerminatorInstruction::Return { return_values } => return_values.first().unwrap(),
+            _ => unreachable!(),
+        };
+        assert_eq!(func.dfg[*ret_val_id], func.dfg[const_one]);
+    }
+
+    #[test]
+    fn test_simple_with_call() {
+        // func() {
+        //   block0():
+        //     v0 = alloc 2
+        //     v1 = add v0, Field 1
+        //     store v1, Field 1
+        //     v2 = add v0, Field 1
+        //     v3 = load v1
+        //     v4 = call f0, v0
+        //     return v3
+
+        let func_id = Id::test_new(0);
+        let mut builder = FunctionBuilder::new("func".into(), func_id);
+        let v0 = builder.insert_allocate(2);
+        let const_one = builder.field_constant(FieldElement::one());
+        let v1 = builder.insert_binary(v0, BinaryOp::Add, const_one);
+        builder.insert_store(v1, const_one);
+        // v2 is created internally by builder.insert_load
+        let v3 = builder.insert_load(v0, const_one, Type::field());
+        let f0 = builder.import_intrinsic_id(Intrinsic::Println);
+        builder.insert_call(f0, vec![v0], vec![Type::Unit]);
+        builder.terminate_with_return(vec![v3]);
+
+        let mut ssa = builder.finish();
+
+        let mut func = ssa.functions.remove(&func_id).unwrap();
+        let block_id = func.entry_block();
+
+        let mut mem2reg_context = PerBlockContext::new(&mut func.dfg, block_id);
+        let remaining_stores = mem2reg_context.eliminate_store_load();
+
+        assert_eq!(
+            remaining_stores, 1,
+            "Store cannot be removed as it affects intrinsic function call"
+        );
+
+        let block = &func.dfg[block_id];
+        let load_count = block
+            .instructions()
+            .iter()
+            .filter(|instruction_id| matches!(func.dfg[**instruction_id], Instruction::Load { .. }))
+            .count();
+        assert_eq!(load_count, 0);
+        let store_count = block
+            .instructions()
+            .iter()
+            .filter(|instruction_id| {
+                matches!(func.dfg[**instruction_id], Instruction::Store { .. })
+            })
+            .count();
+        assert_eq!(store_count, 1);
+        let ret_val_id = match block.terminator().unwrap() {
+            TerminatorInstruction::Return { return_values } => return_values.first().unwrap(),
+            _ => unreachable!(),
+        };
+        assert_eq!(func.dfg[*ret_val_id], func.dfg[const_one]);
+    }
+}

crates/noirc_evaluator/src/ssa_refactor/opt/mod.rs

@@ -4,3 +4,4 @@
 //! simpler form until the IR only has a single function remaining with 1 block within it.
 //! Generally, these passes are also expected to minimize the final amount of instructions.
 mod inlining;
+mod mem2reg;

crates/noirc_evaluator/src/ssa_refactor/ssa_gen/program.rs

@@ -33,6 +33,11 @@ impl Ssa {
     pub(crate) fn main(&self) -> &Function {
         &self.functions[&self.main_id]
     }
+
+    /// Returns the entry-point function of the program as a mutable reference
+    pub(crate) fn main_mut(&mut self) -> &mut Function {
+        self.functions.get_mut(&self.main_id).expect("ICE: Ssa should have a main function")
+    }
 }
 
 impl Display for Ssa {