Ilp32 5.2 #1

viordash · 2024-10-30T13:41:04Z

No description provided.

…layout ILP32 uses the same struct sigcontext as the native ABI (i.e., LP64), but a different layout for the rest of the signal frame (since siginfo_t and ucontext_t are both ABI-dependent). Since the purpose of parse_user_sigframe() is really to parse sigcontext and not the whole signal frame, the function does not need to depend on the layout of rt_sigframe -- the only purpose of the rt_sigframe pointer is for use as a base to measure the signal frame size. So, this patch renames the function to make it clear that only the sigcontext is really being parsed, and makes the sigframe base pointer generic. A macro is defined to provide a suitable duck-typed interface that can be used with both sigframe definitions. Suggested-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Yury Norov <ynorov@marvell.com>

compat_ptrace_request() lacks handlers for PTRACE_{G,S}ETSIGMASK, instead using those in ptrace_request(). The compat variant should read a compat_sigset_t from userspace instead of ptrace_request()s sigset_t. While compat_sigset_t is the same size as sigset_t, it is defined as 2xu32, instead of a single u64. On a big-endian CPU this means that compat_sigset_t is passed to user-space using middle-endianness, where the least-significant u32 is written most significant byte first. If ptrace_request()s code is used userspace will read the most significant u32 where it expected the least significant. Instead of duplicating ptrace_request()s code as a special case in the arch code, handle it here. Fixes: 29000ca ("ptrace: add ability to get/set signal-blocked mask") CC: Andrey Vagin <avagin@openvz.org> Signed-off-by: James Morse <james.morse@arm.com> Yury: Replace sigset_{to,from}_compat() with new {get,put}_compat_sigset() Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Yury Norov <ynorov@marvell.com>

Thread bits may be accessed from low-level code, so isolating is a measure to avoid circular dependencies in header files. The exact reason for circular dependency is WARN_ON() macro added in patch edd63a2 "set_restore_sigmask() is never called without SIGPENDING (and never should be)" Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Yury Norov <ynorov@marvell.com>

Based on Andrew Pinski's patch-series. Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Yury Norov <ynorov@marvell.com>

In this patchset ILP32 ABI support is added. Additionally to AARCH32, which is binary-compatible with ARM, ILP32 is (mostly) ABI-compatible. From now, AARCH32_EL0 (former COMPAT) config option means the support of AARCH32 userspace, and ARM64_ILP32 - support of ILP32 ABI (see following patches). COMPAT indicates that one of them or both is enabled. Where needed, CONFIG_COMPAT is changed over to use CONFIG_AARCH32_EL0 instead. Reviewed-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Andrew Pinski <Andrew.Pinski@caviumnetworks.com> Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Bamvor Jian Zhang <bamv2005@gmail.com> Signed-off-by: Yury Norov <ynorov@marvell.com>

The ILP32 for ARM64 patch series introduces another 'compat' mode additionally to aarch32_el0. So to avoid confusing, aarch32-only functions renamed in according to it. Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Yury Norov <ynorov@marvell.com>

Define __BITS_PER_LONG depending on the ABI used (i.e. check whether __ILP32__ or __LP64__ is defined). This is necessary for glibc to determine the appropriate type definitions for the system call interface. Signed-off-by: Andrew Pinski <apinski@cavium.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Reviewed-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Yury Norov <ynorov@marvell.com>

Based on patch of Andrew Pinski. This patch introduces is_a32_compat_task and is_a32_thread so it is easier to say this is a a32 specific thread or a generic compat thread/task. Corresponding functions are located in <asm/is_compat.h> to avoid mess in headers. Some files include both <linux/compat.h> and <asm/compat.h>, and this is wrong because <linux/compat.h> has <asm/compat.h> already included. It was fixed too. Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Andrew Pinski <Andrew.Pinski@caviumnetworks.com> Signed-off-by: Bamvor Jian Zhang <bamv2005@gmail.com> Signed-off-by: Yury Norov <ynorov@marvell.com>

ILP32 tasks are needed to be distinguished from LP64 and AARCH32. This patch adds helper functions is_ilp32_compat_{task,thread} and thread flag TIF_32BIT_AARCH64 to address it. This is a preparation for following patches in ILP32 patchset. For consistency, SET_PERSONALITY is changed here accordingly. Signed-off-by: Andrew Pinski <Andrew.Pinski@caviumnetworks.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Reviewed-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Yury Norov <ynorov@marvell.com>

syscall_get_arch() currently makes no difference between arm64 and arm64/ilp32. Fix it by adding AUDIT_ARCH_AARCH64ILP32. Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Yury Norov <ynorov@marvell.com>

As we support more than one compat formats, it looks more reasonable to not use fs/compat_binfmt.c. Custom binfmt_elf32.c allows to move aarch32 specific definitions there and make code more maintainable and readable. Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Yury Norov <ynorov@marvell.com>

ILP32 patch series introduces new type of binaries which is also compat. So rename existung aarch32 compat_elf_hwcap's helps to avoid confusing. Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Yury Norov <ynorov@marvell.com>

Like binfmt_elf32.c for AARCH32, binfmt_ilp32.c is needed to handle ILP32 binaries. Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Bamvor Jian Zhang <bamv2005@gmail.com> Signed-off-by: Yury Norov <ynorov@marvell.com>

According to userspace/kernel ABI, userspace off_t is passed in register pair just like in aarch32. In this patch corresponding aarch32 handlers are shared to ilp32 code. Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Yury Norov <ynorov@marvell.com>

Depending on the personality of the task, syscalls has to be dispatched to either aarch64, aarch32 or aarch64/ilp32 syscall handlers. We add the support of ILP32 mode in this series, therefore introduce corresponding syscall table. Some system calls are wired to aarch32 syscall handlers, as listed in arch/arm64/kernel/sys_ilp32.c. For aarch64/ilp32, top halves of syscall arguments are meaningless anthough not zeroed by hardware. Do that in the delouse_pt_regs() routine to avoid passing garbage by userspace. Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Yury Norov <ynorov@marvell.com>

Following patches of the series introduce ILP32-specific structures and handlers for signal subsystem. In this patch, functions and structures that common for LP64 and ILP32 are moved to arch/arm64/include/asm/signal_common.h to let ILP32 code reuse them. Some functions work with struct rt_sigframe which differs for ILP32. Therefore, to let ILP32 generate correct code, body of that functions are moved to arch/arm64/include/asm/signal_common.h. Others just declared in new header. Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Yury Norov <ynorov@marvell.com>

ILP32 needs to mix 32bit struct siginfo and 64bit sigframe for its signal handlers. Move the existing compat code for copying siginfo to user space and manipulating signal masks into signal32_common.c so it can be used to deliver aarch32 and ilp32 signals. Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Yury Norov <ynorov@marvell.com>

ILP32 uses AARCH32 compat structures and syscall handlers for signals. But ILP32 rt_sigframe and ucontext structures differ from both LP64 and AARCH32. >From software point of view ILP32 is typical 32-bit compat ABI, and from hardware point of view, it's just like LP64. struct rt_sigframe defined in this patch in arch/arm64/kernel/signal_ilp32.c redefines one in arch/arm64/kernel/signal.c. And functions located in arch/arm64/include/signal_common.h pick up new structure to generate the code suitable for ILP32. Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Yury Norov <ynorov@marvell.com>

ILP32 has context-related structures different from both aarch32 and aarch64/lp64. In this patch compat_arch_ptrace() renamed to compat_a32_ptrace(), and compat_arch_ptrace() only makes choice between compat_a32_ptrace() and new compat_ilp32_ptrace() handler. compat_ilp32_ptrace() calls generic compat_ptrace_request() for all requests except PTRACE_GETSIGMASK and PTRACE_SETSIGMASK, which need special handling. Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Bamvor Jian Zhang <bamv2005@gmail.com> Signed-off-by: Yury Norov <ynorov@marvell.com>

ILP32 VDSO exports following symbols: __kernel_rt_sigreturn; __kernel_gettimeofday; __kernel_clock_gettime; __kernel_clock_getres. What shared object to use, kernel selects depending on result of is_ilp32_compat_task() in arch/arm64/kernel/vdso.c, so it substitutes correct pages and spec. Adjusted to move the data page before code pages in sync with commit 601255a ("arm64: vdso: move data page before code pages") Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Bamvor Jian Zhang <bamv2005@gmail.com> Signed-off-by: Yury Norov <ynorov@marvell.com>

This patch adds the config option for ILP32. Signed-off-by: Andrew Pinski <Andrew.Pinski@caviumnetworks.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Reviewed-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Yury Norov <ynorov@marvell.com>

The intention of the ILP32 branches is to enable ILP32 by default. This default is to be revisited for upstream merging. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Yury Norov <ynorov@marvell.com>

Depending on the type of compat execution (aarch32 or ilp32), we should wire some syscalls to different numbers in order to make seccomp work correctly. The implementation idea is borrowed from MIPS code. Signed-off-by: Yury Norov <yury.norov@gmail.com> Reported-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>

Currently, when configuring TMU (Time Management Unit) mode of a given router, we take into account only its own TMU requirements ignoring other routers in the domain. This is problematic if the router we are configuring has lower TMU requirements than what is already configured in the domain. In the scenario below, we have a host router with two USB4 ports: A and B. Port A connected to device router #1 (which supports CL states) and existing DisplayPort tunnel, thus, the TMU mode is HiFi uni-directional. 1. Initial topology [Host] A/ / [Device #1] / Monitor 2. Plug in device #2 (that supports CL states) to downstream port B of the host router [Host] A/ B\ / \ [Device #1] [Device #2] / Monitor The TMU mode on port B and port A will be configured to LowRes which is not what we want and will cause monitor to start flickering. To address this we first scan the domain and search for any router configured to HiFi uni-directional mode, and if found, configure TMU mode of the given router to HiFi uni-directional as well. Cc: stable@vger.kernel.org Signed-off-by: Gil Fine <gil.fine@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

The variable wwan_rtnl_link_ops assign a *bigger* maxtype which leads to a global out-of-bounds read when parsing the netlink attributes. Exactly same bug cause as the oob fixed in commit b33fb5b ("net: qualcomm: rmnet: fix global oob in rmnet_policy"). ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:388 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603 Read of size 1 at addr ffffffff8b09cb60 by task syz.1.66276/323862 CPU: 0 PID: 323862 Comm: syz.1.66276 Not tainted 6.1.70 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x177/0x231 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x14f/0x750 mm/kasan/report.c:395 kasan_report+0x139/0x170 mm/kasan/report.c:495 validate_nla lib/nlattr.c:388 [inline] __nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603 __nla_parse+0x3c/0x50 lib/nlattr.c:700 nla_parse_nested_deprecated include/net/netlink.h:1269 [inline] __rtnl_newlink net/core/rtnetlink.c:3514 [inline] rtnl_newlink+0x7bc/0x1fd0 net/core/rtnetlink.c:3623 rtnetlink_rcv_msg+0x794/0xef0 net/core/rtnetlink.c:6122 netlink_rcv_skb+0x1de/0x420 net/netlink/af_netlink.c:2508 netlink_unicast_kernel net/netlink/af_netlink.c:1326 [inline] netlink_unicast+0x74b/0x8c0 net/netlink/af_netlink.c:1352 netlink_sendmsg+0x882/0xb90 net/netlink/af_netlink.c:1874 sock_sendmsg_nosec net/socket.c:716 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x5cc/0x8f0 net/socket.c:2499 ___sys_sendmsg+0x21c/0x290 net/socket.c:2553 __sys_sendmsg net/socket.c:2582 [inline] __do_sys_sendmsg net/socket.c:2591 [inline] __se_sys_sendmsg+0x19e/0x270 net/socket.c:2589 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x45/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f67b19a24ad RSP: 002b:00007f67b17febb8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f67b1b45f80 RCX: 00007f67b19a24ad RDX: 0000000000000000 RSI: 0000000020005e40 RDI: 0000000000000004 RBP: 00007f67b1a1e01d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffd2513764f R14: 00007ffd251376e0 R15: 00007f67b17fed40 </TASK> The buggy address belongs to the variable: wwan_rtnl_policy+0x20/0x40 The buggy address belongs to the physical page: page:ffffea00002c2700 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xb09c flags: 0xfff00000001000(reserved|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000001000 ffffea00002c2708 ffffea00002c2708 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner info is not present (never set?) Memory state around the buggy address: ffffffff8b09ca00: 05 f9 f9 f9 05 f9 f9 f9 00 01 f9 f9 00 01 f9 f9 ffffffff8b09ca80: 00 00 00 05 f9 f9 f9 f9 00 00 03 f9 f9 f9 f9 f9 >ffffffff8b09cb00: 00 00 00 00 05 f9 f9 f9 00 00 00 00 f9 f9 f9 f9 ^ ffffffff8b09cb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== According to the comment of `nla_parse_nested_deprecated`, use correct size `IFLA_WWAN_MAX` here to fix this issue. Fixes: 88b7105 ("wwan: add interface creation support") Signed-off-by: Lin Ma <linma@zju.edu.cn> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241015131621.47503-1-linma@zju.edu.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>

…n_net In the normal case, when we excute `echo 0 > /proc/fs/nfsd/threads`, the function `nfs4_state_destroy_net` in `nfs4_state_shutdown_net` will release all resources related to the hashed `nfs4_client`. If the `nfsd_client_shrinker` is running concurrently, the `expire_client` function will first unhash this client and then destroy it. This can lead to the following warning. Additionally, numerous use-after-free errors may occur as well. nfsd_client_shrinker echo 0 > /proc/fs/nfsd/threads expire_client nfsd_shutdown_net unhash_client ... nfs4_state_shutdown_net /* won't wait shrinker exit */ /* cancel_work(&nn->nfsd_shrinker_work) * nfsd_file for this /* won't destroy unhashed client1 */ * client1 still alive nfs4_state_destroy_net */ nfsd_file_cache_shutdown /* trigger warning */ kmem_cache_destroy(nfsd_file_slab) kmem_cache_destroy(nfsd_file_mark_slab) /* release nfsd_file and mark */ __destroy_client ==================================================================== BUG nfsd_file (Not tainted): Objects remaining in nfsd_file on __kmem_cache_shutdown() -------------------------------------------------------------------- CPU: 4 UID: 0 PID: 764 Comm: sh Not tainted 6.12.0-rc3+ #1 dump_stack_lvl+0x53/0x70 slab_err+0xb0/0xf0 __kmem_cache_shutdown+0x15c/0x310 kmem_cache_destroy+0x66/0x160 nfsd_file_cache_shutdown+0xac/0x210 [nfsd] nfsd_destroy_serv+0x251/0x2a0 [nfsd] nfsd_svc+0x125/0x1e0 [nfsd] write_threads+0x16a/0x2a0 [nfsd] nfsctl_transaction_write+0x74/0xa0 [nfsd] vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e ==================================================================== BUG nfsd_file_mark (Tainted: G B W ): Objects remaining nfsd_file_mark on __kmem_cache_shutdown() -------------------------------------------------------------------- dump_stack_lvl+0x53/0x70 slab_err+0xb0/0xf0 __kmem_cache_shutdown+0x15c/0x310 kmem_cache_destroy+0x66/0x160 nfsd_file_cache_shutdown+0xc8/0x210 [nfsd] nfsd_destroy_serv+0x251/0x2a0 [nfsd] nfsd_svc+0x125/0x1e0 [nfsd] write_threads+0x16a/0x2a0 [nfsd] nfsctl_transaction_write+0x74/0xa0 [nfsd] vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e To resolve this issue, cancel `nfsd_shrinker_work` using synchronous mode in nfs4_state_shutdown_net. Fixes: 7c24fa2 ("NFSD: replace delayed_work with work_struct for nfsd_client_shrinker") Signed-off-by: Yang Erkun <yangerkun@huaweicloud.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

[BUG] Syzbot reports the following crash: BTRFS info (device loop0 state MCS): disabling free space tree BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE (0x1) BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE_VALID (0x2) Oops: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:backup_super_roots fs/btrfs/disk-io.c:1691 [inline] RIP: 0010:write_all_supers+0x97a/0x40f0 fs/btrfs/disk-io.c:4041 Call Trace: <TASK> btrfs_commit_transaction+0x1eae/0x3740 fs/btrfs/transaction.c:2530 btrfs_delete_free_space_tree+0x383/0x730 fs/btrfs/free-space-tree.c:1312 btrfs_start_pre_rw_mount+0xf28/0x1300 fs/btrfs/disk-io.c:3012 btrfs_remount_rw fs/btrfs/super.c:1309 [inline] btrfs_reconfigure+0xae6/0x2d40 fs/btrfs/super.c:1534 btrfs_reconfigure_for_mount fs/btrfs/super.c:2020 [inline] btrfs_get_tree_subvol fs/btrfs/super.c:2079 [inline] btrfs_get_tree+0x918/0x1920 fs/btrfs/super.c:2115 vfs_get_tree+0x90/0x2b0 fs/super.c:1800 do_new_mount+0x2be/0xb40 fs/namespace.c:3472 do_mount fs/namespace.c:3812 [inline] __do_sys_mount fs/namespace.c:4020 [inline] __se_sys_mount+0x2d6/0x3c0 fs/namespace.c:3997 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [CAUSE] To support mounting different subvolume with different RO/RW flags for the new mount APIs, btrfs introduced two workaround to support this feature: - Skip mount option/feature checks if we are mounting a different subvolume - Reconfigure the fs to RW if the initial mount is RO Combining these two, we can have the following sequence: - Mount the fs ro,rescue=all,clear_cache,space_cache=v1 rescue=all will mark the fs as hard read-only, so no v2 cache clearing will happen. - Mount a subvolume rw of the same fs. We go into btrfs_get_tree_subvol(), but fc_mount() returns EBUSY because our new fc is RW, different from the original fs. Now we enter btrfs_reconfigure_for_mount(), which switches the RO flag first so that we can grab the existing fs_info. Then we reconfigure the fs to RW. - During reconfiguration, option/features check is skipped This means we will restart the v2 cache clearing, and convert back to v1 cache. This will trigger fs writes, and since the original fs has "rescue=all" option, it skips the csum tree read. And eventually causing NULL pointer dereference in super block writeback. [FIX] For reconfiguration caused by different subvolume RO/RW flags, ensure we always run btrfs_check_options() to ensure we have proper hard RO requirements met. In fact the function btrfs_check_options() doesn't really do many complex checks, but hard RO requirement and some feature dependency checks, thus there is no special reason not to do the check for mount reconfiguration. Reported-by: syzbot+56360f93efa90ff15870@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/0000000000008c5d090621cb2770@google.com/ Fixes: f044b31 ("btrfs: handle the ro->rw transition for mounting different subvolumes") CC: stable@vger.kernel.org # 6.8+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

When creating a trace_probe we would set nr_args prior to truncating the arguments to MAX_TRACE_ARGS. However, we would only initialize arguments up to the limit. This caused invalid memory access when attempting to set up probes with more than 128 fetchargs. BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 UID: 0 PID: 1769 Comm: cat Not tainted 6.11.0-rc7+ torvalds#8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 RIP: 0010:__set_print_fmt+0x134/0x330 Resolve the issue by applying the MAX_TRACE_ARGS limit earlier. Return an error when there are too many arguments instead of silently truncating. Link: https://lore.kernel.org/all/20240930202656.292869-1-mikel@mikelr.com/ Fixes: 035ba76 ("tracing/probes: cleanup: Set trace_probe::nr_args at trace_probe_init") Signed-off-by: Mikel Rychliski <mikel@mikelr.com> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

…ing to satisfy some BPF verifiers In a RHEL8 kernel (4.18.0-513.11.1.el8_9.x86_64), that, as enterprise kernels go, have backports from modern kernels, the verifier complains about lack of bounds check for the index into the array of syscall arguments, on a BPF bytecode generated by clang 17, with: ; } else if (size < 0 && size >= -6) { /* buffer */ 116: (b7) r1 = -6 117: (2d) if r1 > r6 goto pc-30 R0=map_value(id=0,off=0,ks=4,vs=24688,imm=0) R1_w=inv-6 R2=map_value(id=0,off=16,ks=4,vs=8272,imm=0) R3=inv(id=0) R5=inv40 R6=inv(id=0,umin_value=18446744073709551610,var_off=(0xffffffff00000000; 0xffffffff)) R7=map_value(id=0,off=56,ks=4,vs=8272,imm=0) R8=invP6 R9=map_value(id=0,off=20,ks=4,vs=24,imm=0) R10=fp0 fp-8=mmmmmmmm fp-16=map_value fp-24=map_value fp-32=inv40 fp-40=ctx fp-48=map_value fp-56=inv1 fp-64=map_value fp-72=map_value fp-80=map_value ; index = -(size + 1); 118: (a7) r6 ^= -1 119: (67) r6 <<= 32 120: (77) r6 >>= 32 ; aug_size = args->args[index]; 121: (67) r6 <<= 3 122: (79) r1 = *(u64 *)(r10 -24) 123: (0f) r1 += r6 last_idx 123 first_idx 116 regs=40 stack=0 before 122: (79) r1 = *(u64 *)(r10 -24) regs=40 stack=0 before 121: (67) r6 <<= 3 regs=40 stack=0 before 120: (77) r6 >>= 32 regs=40 stack=0 before 119: (67) r6 <<= 32 regs=40 stack=0 before 118: (a7) r6 ^= -1 regs=40 stack=0 before 117: (2d) if r1 > r6 goto pc-30 regs=42 stack=0 before 116: (b7) r1 = -6 R0_w=map_value(id=0,off=0,ks=4,vs=24688,imm=0) R1_w=inv1 R2_w=map_value(id=0,off=16,ks=4,vs=8272,imm=0) R3_w=inv(id=0) R5_w=inv40 R6_rw=invP(id=0,smin_value=-2147483648,smax_value=0) R7_w=map_value(id=0,off=56,ks=4,vs=8272,imm=0) R8_w=invP6 R9_w=map_value(id=0,off=20,ks=4,vs=24,imm=0) R10=fp0 fp-8=mmmmmmmm fp-16_w=map_value fp-24_r=map_value fp-32_w=inv40 fp-40=ctx fp-48=map_value fp-56_w=inv1 fp-64_w=map_value fp-72=map_value fp-80=map_value parent didn't have regs=40 stack=0 marks last_idx 110 first_idx 98 regs=40 stack=0 before 110: (6d) if r1 s> r6 goto pc+5 regs=42 stack=0 before 109: (b7) r1 = 1 regs=40 stack=0 before 108: (65) if r6 s> 0x1000 goto pc+7 regs=40 stack=0 before 98: (55) if r6 != 0x1 goto pc+9 R0_w=map_value(id=0,off=0,ks=4,vs=24688,imm=0) R1_w=invP12 R2_w=map_value(id=0,off=16,ks=4,vs=8272,imm=0) R3_rw=inv(id=0) R5_w=inv24 R6_rw=invP(id=0,smin_value=-2147483648,smax_value=2147483647) R7_w=map_value(id=0,off=40,ks=4,vs=8272,imm=0) R8_rw=invP4 R9_w=map_value(id=0,off=12,ks=4,vs=24,imm=0) R10=fp0 fp-8=mmmmmmmm fp-16_rw=map_value fp-24_r=map_value fp-32_rw=invP24 fp-40_r=ctx fp-48_r=map_value fp-56_w=invP1 fp-64_rw=map_value fp-72_r=map_value fp-80_r=map_value parent already had regs=40 stack=0 marks 124: (79) r6 = *(u64 *)(r1 +16) R0=map_value(id=0,off=0,ks=4,vs=24688,imm=0) R1_w=map_value(id=0,off=0,ks=4,vs=8272,umax_value=34359738360,var_off=(0x0; 0x7fffffff8),s32_max_value=2147483640,u32_max_value=-8) R2=map_value(id=0,off=16,ks=4,vs=8272,imm=0) R3=inv(id=0) R5=inv40 R6_w=invP(id=0,umax_value=34359738360,var_off=(0x0; 0x7fffffff8),s32_max_value=2147483640,u32_max_value=-8) R7=map_value(id=0,off=56,ks=4,vs=8272,imm=0) R8=invP6 R9=map_value(id=0,off=20,ks=4,vs=24,imm=0) R10=fp0 fp-8=mmmmmmmm fp-16=map_value fp-24=map_value fp-32=inv40 fp-40=ctx fp-48=map_value fp-56=inv1 fp-64=map_value fp-72=map_value fp-80=map_value R1 unbounded memory access, make sure to bounds check any such access processed 466 insns (limit 1000000) max_states_per_insn 2 total_states 20 peak_states 20 mark_read 3 If we add this line, as used in other BPF programs, to cap that index: index &= 7; The generated BPF program is considered safe by that version of the BPF verifier, allowing perf to collect the syscall args in one more kernel using the BPF based pointer contents collector. With the above one-liner it works with that kernel: [root@dell-per740-01 ~]# uname -a Linux dell-per740-01.khw.eng.rdu2.dc.redhat.com 4.18.0-513.11.1.el8_9.x86_64 #1 SMP Thu Dec 7 03:06:13 EST 2023 x86_64 x86_64 x86_64 GNU/Linux [root@dell-per740-01 ~]# ~acme/bin/perf trace -e *sleep* sleep 1.234567890 0.000 (1234.704 ms): sleep/3863610 nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 234567890 }) = 0 [root@dell-per740-01 ~]# As well as with the one in Fedora 40: root@number:~# uname -a Linux number 6.11.3-200.fc40.x86_64 #1 SMP PREEMPT_DYNAMIC Thu Oct 10 22:31:19 UTC 2024 x86_64 GNU/Linux root@number:~# perf trace -e *sleep* sleep 1.234567890 0.000 (1234.722 ms): sleep/14873 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 234567890 }, rmtp: 0x7ffe87311a40) = 0 root@number:~# Song Liu reported that this one-liner was being optimized out by clang 18, so I suggested and he tested that adding a compiler barrier before it made clang v18 to keep it and the verifier in the kernel in Song's case (Meta's 5.12 based kernel) also was happy with the resulting bytecode. I'll investigate using virtme-ng[1] to have all the perf BPF based functionality thoroughly tested over multiple kernels and clang versions. [1] https://kernel-recipes.org/en/2024/virtme-ng/ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alan Maguire <alan.maguire@oracle.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrea Righi <andrea.righi@linux.dev> Cc: Howard Chu <howardchu95@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/lkml/Zw7JgJc0LOwSpuvx@x1 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The purpose of btrfs_bbio_propagate_error() shall be propagating an error of split bio to its original btrfs_bio, and tell the error to the upper layer. However, it's not working well on some cases. * Case 1. Immediate (or quick) end_bio with an error When btrfs sends btrfs_bio to mirrored devices, btrfs calls btrfs_bio_end_io() when all the mirroring bios are completed. If that btrfs_bio was split, it is from btrfs_clone_bioset and its end_io function is btrfs_orig_write_end_io. For this case, btrfs_bbio_propagate_error() accesses the orig_bbio's bio context to increase the error count. That works well in most cases. However, if the end_io is called enough fast, orig_bbio's (remaining part after split) bio context may not be properly set at that time. Since the bio context is set when the orig_bbio (the last btrfs_bio) is sent to devices, that might be too late for earlier split btrfs_bio's completion. That will result in NULL pointer dereference. That bug is easily reproducible by running btrfs/146 on zoned devices [1] and it shows the following trace. [1] You need raid-stripe-tree feature as it create "-d raid0 -m raid1" FS. BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 UID: 0 PID: 13 Comm: kworker/u32:1 Not tainted 6.11.0-rc7-BTRFS-ZNS+ torvalds#474 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: writeback wb_workfn (flush-btrfs-5) RIP: 0010:btrfs_bio_end_io+0xae/0xc0 [btrfs] BTRFS error (device dm-0): bdev /dev/mapper/error-test errs: wr 2, rd 0, flush 0, corrupt 0, gen 0 RSP: 0018:ffffc9000006f248 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888005a7f080 RCX: ffffc9000006f1dc RDX: 0000000000000000 RSI: 000000000000000a RDI: ffff888005a7f080 RBP: ffff888011dfc540 R08: 0000000000000000 R09: 0000000000000001 R10: ffffffff82e508e0 R11: 0000000000000005 R12: ffff88800ddfbe58 R13: ffff888005a7f080 R14: ffff888005a7f158 R15: ffff888005a7f158 FS: 0000000000000000(0000) GS:ffff88803ea80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000020 CR3: 0000000002e22006 CR4: 0000000000370ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die_body.cold+0x19/0x26 ? page_fault_oops+0x13e/0x2b0 ? _printk+0x58/0x73 ? do_user_addr_fault+0x5f/0x750 ? exc_page_fault+0x76/0x240 ? asm_exc_page_fault+0x22/0x30 ? btrfs_bio_end_io+0xae/0xc0 [btrfs] ? btrfs_log_dev_io_error+0x7f/0x90 [btrfs] btrfs_orig_write_end_io+0x51/0x90 [btrfs] dm_submit_bio+0x5c2/0xa50 [dm_mod] ? find_held_lock+0x2b/0x80 ? blk_try_enter_queue+0x90/0x1e0 __submit_bio+0xe0/0x130 ? ktime_get+0x10a/0x160 ? lockdep_hardirqs_on+0x74/0x100 submit_bio_noacct_nocheck+0x199/0x410 btrfs_submit_bio+0x7d/0x150 [btrfs] btrfs_submit_chunk+0x1a1/0x6d0 [btrfs] ? lockdep_hardirqs_on+0x74/0x100 ? __folio_start_writeback+0x10/0x2c0 btrfs_submit_bbio+0x1c/0x40 [btrfs] submit_one_bio+0x44/0x60 [btrfs] submit_extent_folio+0x13f/0x330 [btrfs] ? btrfs_set_range_writeback+0xa3/0xd0 [btrfs] extent_writepage_io+0x18b/0x360 [btrfs] extent_write_locked_range+0x17c/0x340 [btrfs] ? __pfx_end_bbio_data_write+0x10/0x10 [btrfs] run_delalloc_cow+0x71/0xd0 [btrfs] btrfs_run_delalloc_range+0x176/0x500 [btrfs] ? find_lock_delalloc_range+0x119/0x260 [btrfs] writepage_delalloc+0x2ab/0x480 [btrfs] extent_write_cache_pages+0x236/0x7d0 [btrfs] btrfs_writepages+0x72/0x130 [btrfs] do_writepages+0xd4/0x240 ? find_held_lock+0x2b/0x80 ? wbc_attach_and_unlock_inode+0x12c/0x290 ? wbc_attach_and_unlock_inode+0x12c/0x290 __writeback_single_inode+0x5c/0x4c0 ? do_raw_spin_unlock+0x49/0xb0 writeback_sb_inodes+0x22c/0x560 __writeback_inodes_wb+0x4c/0xe0 wb_writeback+0x1d6/0x3f0 wb_workfn+0x334/0x520 process_one_work+0x1ee/0x570 ? lock_is_held_type+0xc6/0x130 worker_thread+0x1d1/0x3b0 ? __pfx_worker_thread+0x10/0x10 kthread+0xee/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: dm_mod btrfs blake2b_generic xor raid6_pq rapl CR2: 0000000000000020 * Case 2. Earlier completion of orig_bbio for mirrored btrfs_bios btrfs_bbio_propagate_error() assumes the end_io function for orig_bbio is called last among split bios. In that case, btrfs_orig_write_end_io() sets the bio->bi_status to BLK_STS_IOERR by seeing the bioc->error [2]. Otherwise, the increased orig_bio's bioc->error is not checked by anyone and return BLK_STS_OK to the upper layer. [2] Actually, this is not true. Because we only increases orig_bioc->errors by max_errors, the condition "atomic_read(&bioc->error) > bioc->max_errors" is still not met if only one split btrfs_bio fails. * Case 3. Later completion of orig_bbio for un-mirrored btrfs_bios In contrast to the above case, btrfs_bbio_propagate_error() is not working well if un-mirrored orig_bbio is completed last. It sets orig_bbio->bio.bi_status to the btrfs_bio's error. But, that is easily over-written by orig_bbio's completion status. If the status is BLK_STS_OK, the upper layer would not know the failure. * Solution Considering the above cases, we can only save the error status in the orig_bbio (remaining part after split) itself as it is always available. Also, the saved error status should be propagated when all the split btrfs_bios are finished (i.e, bbio->pending_ios == 0). This commit introduces "status" to btrfs_bbio and saves the first error of split bios to original btrfs_bio's "status" variable. When all the split bios are finished, the saved status is loaded into original btrfs_bio's status. With this commit, btrfs/146 on zoned devices does not hit the NULL pointer dereference anymore. Fixes: 852eee6 ("btrfs: allow btrfs_submit_bio to split bios") CC: stable@vger.kernel.org # 6.6+ Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>

Running rcutorture scenario TREE05, the below warning is triggered. [ 32.604594] WARNING: suspicious RCU usage [ 32.605928] 6.11.0-rc5-00040-g4ba4f1afb6a9 #55238 Not tainted [ 32.607812] ----------------------------- [ 32.609140] kernel/events/core.c:13946 RCU-list traversed in non-reader section!! [ 32.611595] other info that might help us debug this: [ 32.614247] rcu_scheduler_active = 2, debug_locks = 1 [ 32.616392] 3 locks held by cpuhp/4/35: [ 32.617687] #0: ffffffffb666a650 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x4e/0x200 [ 32.620563] #1: ffffffffb666cd20 (cpuhp_state-down){+.+.}-{0:0}, at: cpuhp_thread_fun+0x4e/0x200 [ 32.623412] #2: ffffffffb677c288 (pmus_lock){+.+.}-{3:3}, at: perf_event_exit_cpu_context+0x32/0x2f0 In perf_event_clear_cpumask(), uses list_for_each_entry_rcu() without an obvious RCU read-side critical section. Either pmus_srcu or pmus_lock is good enough to protect the pmus list. In the current context, pmus_lock is already held. The list_for_each_entry_rcu() is not required. Fixes: 4ba4f1a ("perf: Generic hotplug support for a PMU with a scope") Closes: https://lore.kernel.org/lkml/2b66dff8-b827-494b-b151-1ad8d56f13e6@paulmck-laptop/ Closes: https://lore.kernel.org/oe-lkp/202409131559.545634cc-oliver.sang@intel.com Reported-by: "Paul E. McKenney" <paulmck@kernel.org> Reported-by: kernel test robot <oliver.sang@intel.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: "Paul E. McKenney" <paulmck@kernel.org> Link: https://lore.kernel.org/r/20240913162340.2142976-1-kan.liang@linux.intel.com

Add check for the return value of spi_get_csgpiod() to avoid passing a NULL pointer to gpiod_direction_output(), preventing a crash when GPIO chip select is not used. Fix below crash: [ 4.251960] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 4.260762] Mem abort info: [ 4.263556] ESR = 0x0000000096000004 [ 4.267308] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.272624] SET = 0, FnV = 0 [ 4.275681] EA = 0, S1PTW = 0 [ 4.278822] FSC = 0x04: level 0 translation fault [ 4.283704] Data abort info: [ 4.286583] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 4.292074] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 4.297130] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 4.302445] [0000000000000000] user address but active_mm is swapper [ 4.308805] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 4.315072] Modules linked in: [ 4.318124] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc4-next-20241023-00008-ga20ec42c5fc1 torvalds#359 [ 4.328130] Hardware name: LS1046A QDS Board (DT) [ 4.332832] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 4.339794] pc : gpiod_direction_output+0x34/0x5c [ 4.344505] lr : gpiod_direction_output+0x18/0x5c [ 4.349208] sp : ffff80008003b8f0 [ 4.352517] x29: ffff80008003b8f0 x28: 0000000000000000 x27: ffffc96bcc7e9068 [ 4.359659] x26: ffffc96bcc6e00b0 x25: ffffc96bcc598398 x24: ffff447400132810 [ 4.366800] x23: 0000000000000000 x22: 0000000011e1a300 x21: 0000000000020002 [ 4.373940] x20: 0000000000000000 x19: 0000000000000000 x18: ffffffffffffffff [ 4.381081] x17: ffff44740016e600 x16: 0000000500000003 x15: 0000000000000007 [ 4.388221] x14: 0000000000989680 x13: 0000000000020000 x12: 000000000000001e [ 4.395362] x11: 0044b82fa09b5a53 x10: 0000000000000019 x9 : 0000000000000008 [ 4.402502] x8 : 0000000000000002 x7 : 0000000000000007 x6 : 0000000000000000 [ 4.409641] x5 : 0000000000000200 x4 : 0000000002000000 x3 : 0000000000000000 [ 4.416781] x2 : 0000000000022202 x1 : 0000000000000000 x0 : 0000000000000000 [ 4.423921] Call trace: [ 4.426362] gpiod_direction_output+0x34/0x5c (P) [ 4.431067] gpiod_direction_output+0x18/0x5c (L) [ 4.435771] dspi_setup+0x220/0x334 Fixes: 9e264f3 ("spi: Replace all spi->chip_select and spi->cs_gpiod references with function call") Cc: stable@vger.kernel.org Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20241023203032.1388491-1-Frank.Li@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>

… non-PCI device The function cxl_endpoint_gather_bandwidth() invokes pci_bus_read/write_XXX(), however, not all CXL devices are presently implemented via PCI. It is recognized that the cxl_test has realized a CXL device using a platform device. Calling pci_bus_read/write_XXX() in cxl_test will cause kernel panic: platform cxl_host_bridge.3: host supports CXL (restricted) Oops: general protection fault, probably for non-canonical address 0x3ef17856fcae4fbd: 0000 [#1] PREEMPT SMP PTI Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? die_addr+0x38/0x60 ? exc_general_protection+0x1f5/0x4b0 ? asm_exc_general_protection+0x22/0x30 ? pci_bus_read_config_word+0x1c/0x60 pcie_capability_read_word+0x93/0xb0 pcie_link_speed_mbps+0x18/0x50 cxl_pci_get_bandwidth+0x18/0x60 [cxl_core] cxl_endpoint_gather_bandwidth.constprop.0+0xf4/0x230 [cxl_core] ? xas_store+0x54/0x660 ? preempt_count_add+0x69/0xa0 ? _raw_spin_lock+0x13/0x40 ? __kmalloc_cache_noprof+0xe7/0x270 cxl_region_shared_upstream_bandwidth_update+0x9c/0x790 [cxl_core] cxl_region_attach+0x520/0x7e0 [cxl_core] store_targetN+0xf2/0x120 [cxl_core] kernfs_fop_write_iter+0x13a/0x1f0 vfs_write+0x23b/0x410 ksys_write+0x53/0xd0 do_syscall_64+0x62/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e And Ying also reported a KASAN error with similar calltrace. Reported-by: Huang, Ying <ying.huang@intel.com> Closes: http://lore.kernel.org/87y12w9vp5.fsf@yhuang6-desk2.ccr.corp.intel.com Fixes: a5ab0de ("cxl: Calculate region bandwidth of targets with shared upstream link") Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Huang, Ying <ying.huang@intel.com> Link: https://patch.msgid.link/20241022030054.258942-1-lizhijian@fujitsu.com Signed-off-by: Ira Weiny <ira.weiny@intel.com>

In support of investigating an initialization failure report [1], cxl_test was updated to register mock memory-devices after the mock root-port/bus device had been registered. That led to cxl_test crashing with a use-after-free bug with the following signature: cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1 cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1 cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0 1) cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1 [..] cxld_unregister: cxl decoder14.0: cxl_region_decode_reset: cxl_region region3: mock_decoder_reset: cxl_port port3: decoder3.0 reset 2) mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1 cxl_endpoint_decoder_release: cxl decoder14.0: [..] cxld_unregister: cxl decoder7.0: 3) cxl_region_decode_reset: cxl_region region3: Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI [..] RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core] [..] Call Trace: <TASK> cxl_region_decode_reset+0x69/0x190 [cxl_core] cxl_region_detach+0xe8/0x210 [cxl_core] cxl_decoder_kill_region+0x27/0x40 [cxl_core] cxld_unregister+0x5d/0x60 [cxl_core] At 1) a region has been established with 2 endpoint decoders (7.0 and 14.0). Those endpoints share a common switch-decoder in the topology (3.0). At teardown, 2), decoder14.0 is the first to be removed and hits the "out of order reset case" in the switch decoder. The effect though is that region3 cleanup is aborted leaving it in-tact and referencing decoder14.0. At 3) the second attempt to teardown region3 trips over the stale decoder14.0 object which has long since been deleted. The fix here is to recognize that the CXL specification places no mandate on in-order shutdown of switch-decoders, the driver enforces in-order allocation, and hardware enforces in-order commit. So, rather than fail and leave objects dangling, always remove them. In support of making cxl_region_decode_reset() always succeed, cxl_region_invalidate_memregion() failures are turned into warnings. Crashing the kernel is ok there since system integrity is at risk if caches cannot be managed around physical address mutation events like CXL region destruction. A new device_for_each_child_reverse_from() is added to cleanup port->commit_end after all dependent decoders have been disabled. In other words if decoders are allocated 0->1->2 and disabled 1->2->0 then port->commit_end only decrements from 2 after 2 has been disabled, and it decrements all the way to zero since 1 was disabled previously. Link: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net [1] Cc: stable@vger.kernel.org Fixes: 176baef ("cxl/hdm: Commit decoder state to hardware") Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Alison Schofield <alison.schofield@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://patch.msgid.link/172964782781.81806.17902885593105284330.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com>

Under memory pressure it's possible for GFP_ATOMIC order-0 allocations to fail even though free pages are available in the highatomic reserves. GFP_ATOMIC allocations cannot trigger unreserve_highatomic_pageblock() since it's only run from reclaim. Given that such allocations will pass the watermarks in __zone_watermark_unusable_free(), it makes sense to fallback to highatomic reserves the same way that ALLOC_OOM can. This fixes order-0 page allocation failures observed on Cloudflare's fleet when handling network packets: kswapd1: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0-7 CPU: 10 PID: 696 Comm: kswapd1 Kdump: loaded Tainted: G O 6.6.43-CUSTOM #1 Hardware name: MACHINE Call Trace: <IRQ> dump_stack_lvl+0x3c/0x50 warn_alloc+0x13a/0x1c0 __alloc_pages_slowpath.constprop.0+0xc9d/0xd10 __alloc_pages+0x327/0x340 __napi_alloc_skb+0x16d/0x1f0 bnxt_rx_page_skb+0x96/0x1b0 [bnxt_en] bnxt_rx_pkt+0x201/0x15e0 [bnxt_en] __bnxt_poll_work+0x156/0x2b0 [bnxt_en] bnxt_poll+0xd9/0x1c0 [bnxt_en] __napi_poll+0x2b/0x1b0 bpf_trampoline_6442524138+0x7d/0x1000 __napi_poll+0x5/0x1b0 net_rx_action+0x342/0x740 handle_softirqs+0xcf/0x2b0 irq_exit_rcu+0x6c/0x90 sysvec_apic_timer_interrupt+0x72/0x90 </IRQ> [mfleming@cloudflare.com: update comment] Link: https://lkml.kernel.org/r/20241015125158.3597702-1-matt@readmodwrite.com Link: https://lkml.kernel.org/r/20241011120737.3300370-1-matt@readmodwrite.com Link: https://lore.kernel.org/all/CAGis_TWzSu=P7QJmjD58WWiu3zjMTVKSzdOwWE8ORaGytzWJwQ@mail.gmail.com/ Fixes: 1d91df8 ("mm/page_alloc: handle a missing case for memalloc_nocma_{save/restore} APIs") Signed-off-by: Matt Fleming <mfleming@cloudflare.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

walk_system_ram_res_rev() erroneously discards resource flags when passing the information to the callback. This causes systems with IORESOURCE_SYSRAM_DRIVER_MANAGED memory to have these resources selected during kexec to store kexec buffers if that memory happens to be at placed above normal system ram. This leads to undefined behavior after reboot. If the kexec buffer is never touched, nothing happens. If the kexec buffer is touched, it could lead to a crash (like below) or undefined behavior. Tested on a system with CXL memory expanders with driver managed memory, TPM enabled, and CONFIG_IMA_KEXEC=y. Adding printk's showed the flags were being discarded and as a result the check for IORESOURCE_SYSRAM_DRIVER_MANAGED passes. find_next_iomem_res: name(System RAM (kmem)) start(10000000000) end(1034fffffff) flags(83000200) locate_mem_hole_top_down: start(10000000000) end(1034fffffff) flags(0) [.] BUG: unable to handle page fault for address: ffff89834ffff000 [.] #PF: supervisor read access in kernel mode [.] #PF: error_code(0x0000) - not-present page [.] PGD c04c8bf067 P4D c04c8bf067 PUD c04c8be067 PMD 0 [.] Oops: 0000 [#1] SMP [.] RIP: 0010:ima_restore_measurement_list+0x95/0x4b0 [.] RSP: 0018:ffffc900000d3a80 EFLAGS: 00010286 [.] RAX: 0000000000001000 RBX: 0000000000000000 RCX: ffff89834ffff000 [.] RDX: 0000000000000018 RSI: ffff89834ffff000 RDI: ffff89834ffff018 [.] RBP: ffffc900000d3ba0 R08: 0000000000000020 R09: ffff888132b8a900 [.] R10: 4000000000000000 R11: 000000003a616d69 R12: 0000000000000000 [.] R13: ffffffff8404ac28 R14: 0000000000000000 R15: ffff89834ffff000 [.] FS: 0000000000000000(0000) GS:ffff893d44640000(0000) knlGS:0000000000000000 [.] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [.] ata5: SATA link down (SStatus 0 SControl 300) [.] CR2: ffff89834ffff000 CR3: 000001034d00f001 CR4: 0000000000770ef0 [.] PKRU: 55555554 [.] Call Trace: [.] <TASK> [.] ? __die+0x78/0xc0 [.] ? page_fault_oops+0x2a8/0x3a0 [.] ? exc_page_fault+0x84/0x130 [.] ? asm_exc_page_fault+0x22/0x30 [.] ? ima_restore_measurement_list+0x95/0x4b0 [.] ? template_desc_init_fields+0x317/0x410 [.] ? crypto_alloc_tfm_node+0x9c/0xc0 [.] ? init_ima_lsm+0x30/0x30 [.] ima_load_kexec_buffer+0x72/0xa0 [.] ima_init+0x44/0xa0 [.] __initstub__kmod_ima__373_1201_init_ima7+0x1e/0xb0 [.] ? init_ima_lsm+0x30/0x30 [.] do_one_initcall+0xad/0x200 [.] ? idr_alloc_cyclic+0xaa/0x110 [.] ? new_slab+0x12c/0x420 [.] ? new_slab+0x12c/0x420 [.] ? number+0x12a/0x430 [.] ? sysvec_apic_timer_interrupt+0xa/0x80 [.] ? asm_sysvec_apic_timer_interrupt+0x16/0x20 [.] ? parse_args+0xd4/0x380 [.] ? parse_args+0x14b/0x380 [.] kernel_init_freeable+0x1c1/0x2b0 [.] ? rest_init+0xb0/0xb0 [.] kernel_init+0x16/0x1a0 [.] ret_from_fork+0x2f/0x40 [.] ? rest_init+0xb0/0xb0 [.] ret_from_fork_asm+0x11/0x20 [.] </TASK> Link: https://lore.kernel.org/all/20231114091658.228030-1-bhe@redhat.com/ Link: https://lkml.kernel.org/r/20241017190347.5578-1-gourry@gourry.net Fixes: 7acf164 ("resource: add walk_system_ram_res_rev()") Signed-off-by: Gregory Price <gourry@gourry.net> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The following BUG was triggered: ============================= [ BUG: Invalid wait context ] 6.12.0-rc2-XXX torvalds#406 Not tainted ----------------------------- kworker/1:1/62 is trying to lock: ffffff8801593030 (&cpc_ptr->rmw_lock){+.+.}-{3:3}, at: cpc_write+0xcc/0x370 other info that might help us debug this: context-{5:5} 2 locks held by kworker/1:1/62: #0: ffffff897ef5ec98 (&rq->__lock){-.-.}-{2:2}, at: raw_spin_rq_lock_nested+0x2c/0x50 #1: ffffff880154e238 (&sg_policy->update_lock){....}-{2:2}, at: sugov_update_shared+0x3c/0x280 stack backtrace: CPU: 1 UID: 0 PID: 62 Comm: kworker/1:1 Not tainted 6.12.0-rc2-g9654bd3e8806 torvalds#406 Workqueue: 0x0 (events) Call trace: dump_backtrace+0xa4/0x130 show_stack+0x20/0x38 dump_stack_lvl+0x90/0xd0 dump_stack+0x18/0x28 __lock_acquire+0x480/0x1ad8 lock_acquire+0x114/0x310 _raw_spin_lock+0x50/0x70 cpc_write+0xcc/0x370 cppc_set_perf+0xa0/0x3a8 cppc_cpufreq_fast_switch+0x40/0xc0 cpufreq_driver_fast_switch+0x4c/0x218 sugov_update_shared+0x234/0x280 update_load_avg+0x6ec/0x7b8 dequeue_entities+0x108/0x830 dequeue_task_fair+0x58/0x408 __schedule+0x4f0/0x1070 schedule+0x54/0x130 worker_thread+0xc0/0x2e8 kthread+0x130/0x148 ret_from_fork+0x10/0x20 sugov_update_shared() locks a raw_spinlock while cpc_write() locks a spinlock. To have a correct wait-type order, update rmw_lock to a raw spinlock and ensure that interrupts will be disabled on the CPU holding it. Fixes: 60949b7 ("ACPI: CPPC: Fix MASK_VAL() usage") Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Link: https://patch.msgid.link/20241028125657.1271512-1-pierre.gondois@arm.com [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

I got a syzbot report without a repro [1] crashing in nf_send_reset6() I think the issue is that dev->hard_header_len is zero, and we attempt later to push an Ethernet header. Use LL_MAX_HEADER, as other functions in net/ipv6/netfilter/nf_reject_ipv6.c. [1] skbuff: skb_under_panic: text:ffffffff89b1d008 len:74 put:14 head:ffff88803123aa00 data:ffff88803123a9f2 tail:0x3c end:0x140 dev:syz_tun kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 UID: 0 PID: 7373 Comm: syz.1.568 Not tainted 6.12.0-rc2-syzkaller-00631-g6d858708d465 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline] RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216 Code: 0d 8d 48 c7 c6 60 a6 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 ba 30 38 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc900045269b0 EFLAGS: 00010282 RAX: 0000000000000088 RBX: dffffc0000000000 RCX: cd66dacdc5d8e800 RDX: 0000000000000000 RSI: 0000000000000200 RDI: 0000000000000000 RBP: ffff88802d39a3d0 R08: ffffffff8174afec R09: 1ffff920008a4ccc R10: dffffc0000000000 R11: fffff520008a4ccd R12: 0000000000000140 R13: ffff88803123aa00 R14: ffff88803123a9f2 R15: 000000000000003c FS: 00007fdbee5ff6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000005d322000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_push+0xe5/0x100 net/core/skbuff.c:2636 eth_header+0x38/0x1f0 net/ethernet/eth.c:83 dev_hard_header include/linux/netdevice.h:3208 [inline] nf_send_reset6+0xce6/0x1270 net/ipv6/netfilter/nf_reject_ipv6.c:358 nft_reject_inet_eval+0x3b9/0x690 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x4ad/0x1da0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x418/0x6b0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] br_nf_pre_routing_ipv6+0x63e/0x770 net/bridge/br_netfilter_ipv6.c:184 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_bridge_pre net/bridge/br_input.c:277 [inline] br_handle_frame+0x9fd/0x1530 net/bridge/br_input.c:424 __netif_receive_skb_core+0x13e8/0x4570 net/core/dev.c:5562 __netif_receive_skb_one_core net/core/dev.c:5666 [inline] __netif_receive_skb+0x12f/0x650 net/core/dev.c:5781 netif_receive_skb_internal net/core/dev.c:5867 [inline] netif_receive_skb+0x1e8/0x890 net/core/dev.c:5926 tun_rx_batched+0x1b7/0x8f0 drivers/net/tun.c:1550 tun_get_user+0x3056/0x47e0 drivers/net/tun.c:2007 tun_chr_write_iter+0x10d/0x1f0 drivers/net/tun.c:2053 new_sync_write fs/read_write.c:590 [inline] vfs_write+0xa6d/0xc90 fs/read_write.c:683 ksys_write+0x183/0x2b0 fs/read_write.c:736 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fdbeeb7d1ff Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 c9 8d 02 00 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 1c 8e 02 00 48 RSP: 002b:00007fdbee5ff000 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fdbeed36058 RCX: 00007fdbeeb7d1ff RDX: 000000000000008e RSI: 0000000020000040 RDI: 00000000000000c8 RBP: 00007fdbeebf12be R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000008e R11: 0000000000000293 R12: 0000000000000000 R13: 0000000000000000 R14: 00007fdbeed36058 R15: 00007ffc38de06e8 </TASK> Fixes: c8d7b98 ("netfilter: move nf_send_resetX() code to nf_reject_ipvX modules") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Hou Tao says: ==================== The patch set fixes several issues in bits iterator. Patch #1 fixes the kmemleak problem of bits iterator. Patch #2~#3 fix the overflow problem of nr_bits. Patch #4 fixes the potential stack corruption when bits iterator is used on 32-bit host. Patch #5 adds more test cases for bits iterator. Please see the individual patches for more details. And comments are always welcome. --- v4: * patch #1: add ack from Yafang * patch #3: revert code-churn like changes: (1) compute nr_bytes and nr_bits before the check of nr_words. (2) use nr_bits == 64 to check for single u64, preventing build warning on 32-bit hosts. * patch #4: use "BITS_PER_LONG == 32" instead of "!defined(CONFIG_64BIT)" v3: https://lore.kernel.org/bpf/20241025013233.804027-1-houtao@huaweicloud.com/T/#t * split the bits-iterator related patches from "Misc fixes for bpf" patch set * patch #1: use "!nr_bits || bits >= nr_bits" to stop the iteration * patch #2: add a new helper for the overflow problem * patch #3: decrease the limitation from 512 to 511 and check whether nr_bytes is too large for bpf memory allocator explicitly * patch #5: add two more test cases for bit iterator v2: http://lore.kernel.org/bpf/d49fa2f4-f743-c763-7579-c3cab4dd88cb@huaweicloud.com ==================== Link: https://lore.kernel.org/r/20241030100516.3633640-1-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Petr Machata says: ==================== mlxsw: Fixes In this patchset: - Tx header should be pushed for each packet which is transmitted via Spectrum ASICs. Patch #1 adds a missing call to skb_cow_head() to make sure that there is both enough room to push the Tx header and that the SKB header is not cloned and can be modified. - Commit b5b60bb ("mlxsw: pci: Use page pool for Rx buffers allocation") converted mlxsw to use page pool for Rx buffers allocation. Sync for CPU and for device should be done for Rx pages. In patches #2 and #3, add the missing calls to sync pages for, respectively, CPU and the device. - Patch #4 then fixes a bug to IPv6 GRE forwarding offload. Patch #5 adds a generic forwarding test that fails with mlxsw ports prior to the fix. ==================== Link: https://patch.msgid.link/cover.1729866134.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When we compile and load lib/slub_kunit.c,it will cause a panic. The root cause is that __kmalloc_cache_noprof was directly called instead of kmem_cache_alloc,which resulted in no alloc_tag being allocated.This caused current->alloc_tag to be null,leading to a null pointer dereference in alloc_tag_ref_set. Despite the fact that my colleague Pei Xiao will later fix the code in slub_kunit.c,we still need fix null pointer check logic for ref and tag to avoid panic caused by a null pointer dereference. Here is the log for the panic: [ 74.779373][ T2158] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 [ 74.780130][ T2158] Mem abort info: [ 74.780406][ T2158] ESR = 0x0000000096000004 [ 74.780756][ T2158] EC = 0x25: DABT (current EL), IL = 32 bits [ 74.781225][ T2158] SET = 0, FnV = 0 [ 74.781529][ T2158] EA = 0, S1PTW = 0 [ 74.781836][ T2158] FSC = 0x04: level 0 translation fault [ 74.782288][ T2158] Data abort info: [ 74.782577][ T2158] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 74.783068][ T2158] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 74.783533][ T2158] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 74.784010][ T2158] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000105f34000 [ 74.784586][ T2158] [0000000000000020] pgd=0000000000000000, p4d=0000000000000000 [ 74.785293][ T2158] Internal error: Oops: 0000000096000004 [#1] SMP [ 74.785805][ T2158] Modules linked in: slub_kunit kunit ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute ip6table_nat ip6table_mangle 4 [ 74.790661][ T2158] CPU: 0 UID: 0 PID: 2158 Comm: kunit_try_catch Kdump: loaded Tainted: G W N 6.12.0-rc3+ #2 [ 74.791535][ T2158] Tainted: [W]=WARN, [N]=TEST [ 74.791889][ T2158] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 74.792479][ T2158] pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 74.793101][ T2158] pc : alloc_tagging_slab_alloc_hook+0x120/0x270 [ 74.793607][ T2158] lr : alloc_tagging_slab_alloc_hook+0x120/0x270 [ 74.794095][ T2158] sp : ffff800084d33cd0 [ 74.794418][ T2158] x29: ffff800084d33cd0 x28: 0000000000000000 x27: 0000000000000000 [ 74.795095][ T2158] x26: 0000000000000000 x25: 0000000000000012 x24: ffff80007b30e314 [ 74.795822][ T2158] x23: ffff000390ff6f10 x22: 0000000000000000 x21: 0000000000000088 [ 74.796555][ T2158] x20: ffff000390285840 x19: fffffd7fc3ef7830 x18: ffffffffffffffff [ 74.797283][ T2158] x17: ffff8000800e63b4 x16: ffff80007b33afc4 x15: ffff800081654c00 [ 74.798011][ T2158] x14: 0000000000000000 x13: 205d383531325420 x12: 5b5d383734363537 [ 74.798744][ T2158] x11: ffff800084d337e0 x10: 000000000000005d x9 : 00000000ffffffd0 [ 74.799476][ T2158] x8 : 7f7f7f7f7f7f7f7f x7 : ffff80008219d188 x6 : c0000000ffff7fff [ 74.800206][ T2158] x5 : ffff0003fdbc9208 x4 : ffff800081edd188 x3 : 0000000000000001 [ 74.800932][ T2158] x2 : 0beaa6dee1ac5a00 x1 : 0beaa6dee1ac5a00 x0 : ffff80037c2cb000 [ 74.801656][ T2158] Call trace: [ 74.801954][ T2158] alloc_tagging_slab_alloc_hook+0x120/0x270 [ 74.802494][ T2158] __kmalloc_cache_noprof+0x148/0x33c [ 74.802976][ T2158] test_kmalloc_redzone_access+0x4c/0x104 [slub_kunit] [ 74.803607][ T2158] kunit_try_run_case+0x70/0x17c [kunit] [ 74.804124][ T2158] kunit_generic_run_threadfn_adapter+0x2c/0x4c [kunit] [ 74.804768][ T2158] kthread+0x10c/0x118 [ 74.805141][ T2158] ret_from_fork+0x10/0x20 [ 74.805540][ T2158] Code: b9400a80 11000400 b9000a80 97ffd858 (f94012d3) [ 74.806176][ T2158] SMP: stopping secondary CPUs [ 74.808130][ T2158] Starting crashdump kernel... Link: https://lkml.kernel.org/r/20241020070819.307944-1-hao.ge@linux.dev Fixes: e0a955b ("mm/codetag: add pgalloc_tag_copy()") Signed-off-by: Hao Ge <gehao@kylinos.cn> Acked-by: Suren Baghdasaryan <surenb@google.com> Suggested-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Yu Zhao <yuzhao@google.com> Cc: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Enqueue packets in dql after dma engine starts causes race condition. Tx transfer starts once dma engine is started and may execute dql dequeue in completion before it gets queued. It results in following kernel crash while running iperf stress test: kernel BUG at lib/dynamic_queue_limits.c:99! <snip> Internal error: Oops - BUG: 00000000f2000800 [#1] SMP pc : dql_completed+0x238/0x248 lr : dql_completed+0x3c/0x248 Call trace: dql_completed+0x238/0x248 axienet_dma_tx_cb+0xa0/0x170 xilinx_dma_do_tasklet+0xdc/0x290 tasklet_action_common+0xf8/0x11c tasklet_action+0x30/0x3c handle_softirqs+0xf8/0x230 <snip> Start dmaengine after enqueue in dql fixes the crash. Fixes: 6a91b84 ("net: axienet: Introduce dmaengine support") Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com> Link: https://patch.msgid.link/20241030062533.2527042-2-suraj.gupta2@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Recently, we got a customer report that CIFS triggers oops while reconnecting to a server. [0] The workload runs on Kubernetes, and some pods mount CIFS servers in non-root network namespaces. The problem rarely happened, but it was always while the pod was dying. The root cause is wrong reference counting for network namespace. CIFS uses kernel sockets, which do not hold refcnt of the netns that the socket belongs to. That means CIFS must ensure the socket is always freed before its netns; otherwise, use-after-free happens. The repro steps are roughly: 1. mount CIFS in a non-root netns 2. drop packets from the netns 3. destroy the netns 4. unmount CIFS We can reproduce the issue quickly with the script [1] below and see the splat [2] if CONFIG_NET_NS_REFCNT_TRACKER is enabled. When the socket is TCP, it is hard to guarantee the netns lifetime without holding refcnt due to async timers. Let's hold netns refcnt for each socket as done for SMC in commit 9744d2b ("smc: Fix use-after-free in tcp_write_timer_handler()."). Note that we need to move put_net() from cifs_put_tcp_session() to clean_demultiplex_info(); otherwise, __sock_create() still could touch a freed netns while cifsd tries to reconnect from cifs_demultiplex_thread(). Also, maybe_get_net() cannot be put just before __sock_create() because the code is not under RCU and there is a small chance that the same address happened to be reallocated to another netns. [0]: CIFS: VFS: \\XXXXXXXXXXX has not responded in 15 seconds. Reconnecting... CIFS: Serverclose failed 4 times, giving up Unable to handle kernel paging request at virtual address 14de99e461f84a07 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [14de99e461f84a07] address between user and kernel address ranges Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: cls_bpf sch_ingress nls_utf8 cifs cifs_arc4 cifs_md4 dns_resolver tcp_diag inet_diag veth xt_state xt_connmark nf_conntrack_netlink xt_nat xt_statistic xt_MASQUERADE xt_mark xt_addrtype ipt_REJECT nf_reject_ipv4 nft_chain_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_comment nft_compat nf_tables nfnetlink overlay nls_ascii nls_cp437 sunrpc vfat fat aes_ce_blk aes_ce_cipher ghash_ce sm4_ce_cipher sm4 sm3_ce sm3 sha3_ce sha512_ce sha512_arm64 sha1_ce ena button sch_fq_codel loop fuse configfs dmi_sysfs sha2_ce sha256_arm64 dm_mirror dm_region_hash dm_log dm_mod dax efivarfs CPU: 5 PID: 2690970 Comm: cifsd Not tainted 6.1.103-109.184.amzn2023.aarch64 #1 Hardware name: Amazon EC2 r7g.4xlarge/, BIOS 1.0 11/1/2018 pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : fib_rules_lookup+0x44/0x238 lr : __fib_lookup+0x64/0xbc sp : ffff8000265db790 x29: ffff8000265db790 x28: 0000000000000000 x27: 000000000000bd01 x26: 0000000000000000 x25: ffff000b4baf8000 x24: ffff00047b5e4580 x23: ffff8000265db7e0 x22: 0000000000000000 x21: ffff00047b5e4500 x20: ffff0010e3f694f8 x19: 14de99e461f849f7 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 3f92800abd010002 x11: 0000000000000001 x10: ffff0010e3f69420 x9 : ffff800008a6f294 x8 : 0000000000000000 x7 : 0000000000000006 x6 : 0000000000000000 x5 : 0000000000000001 x4 : ffff001924354280 x3 : ffff8000265db7e0 x2 : 0000000000000000 x1 : ffff0010e3f694f8 x0 : ffff00047b5e4500 Call trace: fib_rules_lookup+0x44/0x238 __fib_lookup+0x64/0xbc ip_route_output_key_hash_rcu+0x2c4/0x398 ip_route_output_key_hash+0x60/0x8c tcp_v4_connect+0x290/0x488 __inet_stream_connect+0x108/0x3d0 inet_stream_connect+0x50/0x78 kernel_connect+0x6c/0xac generic_ip_connect+0x10c/0x6c8 [cifs] __reconnect_target_unlocked+0xa0/0x214 [cifs] reconnect_dfs_server+0x144/0x460 [cifs] cifs_reconnect+0x88/0x148 [cifs] cifs_readv_from_socket+0x230/0x430 [cifs] cifs_read_from_socket+0x74/0xa8 [cifs] cifs_demultiplex_thread+0xf8/0x704 [cifs] kthread+0xd0/0xd4 Code: aa0003f8 f8480f13 eb18027f 540006c0 (b9401264) [1]: CIFS_CRED="/root/cred.cifs" CIFS_USER="Administrator" CIFS_PASS="Password" CIFS_IP="X.X.X.X" CIFS_PATH="//${CIFS_IP}/Users/Administrator/Desktop/CIFS_TEST" CIFS_MNT="/mnt/smb" DEV="enp0s3" cat <<EOF > ${CIFS_CRED} username=${CIFS_USER} password=${CIFS_PASS} domain=EXAMPLE.COM EOF unshare -n bash -c " mkdir -p ${CIFS_MNT} ip netns attach root 1 ip link add eth0 type veth peer veth0 netns root ip link set eth0 up ip -n root link set veth0 up ip addr add 192.168.0.2/24 dev eth0 ip -n root addr add 192.168.0.1/24 dev veth0 ip route add default via 192.168.0.1 dev eth0 ip netns exec root sysctl net.ipv4.ip_forward=1 ip netns exec root iptables -t nat -A POSTROUTING -s 192.168.0.2 -o ${DEV} -j MASQUERADE mount -t cifs ${CIFS_PATH} ${CIFS_MNT} -o vers=3.0,sec=ntlmssp,credentials=${CIFS_CRED},rsize=65536,wsize=65536,cache=none,echo_interval=1 touch ${CIFS_MNT}/a.txt ip netns exec root iptables -t nat -D POSTROUTING -s 192.168.0.2 -o ${DEV} -j MASQUERADE " umount ${CIFS_MNT} [2]: ref_tracker: net notrefcnt@000000004bbc008d has 1/1 users at sk_alloc (./include/net/net_namespace.h:339 net/core/sock.c:2227) inet_create (net/ipv4/af_inet.c:326 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1576) generic_ip_connect (fs/smb/client/connect.c:3075) cifs_get_tcp_session.part.0 (fs/smb/client/connect.c:3160 fs/smb/client/connect.c:1798) cifs_mount_get_session (fs/smb/client/trace.h:959 fs/smb/client/connect.c:3366) dfs_mount_share (fs/smb/client/dfs.c:63 fs/smb/client/dfs.c:285) cifs_mount (fs/smb/client/connect.c:3622) cifs_smb3_do_mount (fs/smb/client/cifsfs.c:949) smb3_get_tree (fs/smb/client/fs_context.c:784 fs/smb/client/fs_context.c:802 fs/smb/client/fs_context.c:794) vfs_get_tree (fs/super.c:1800) path_mount (fs/namespace.c:3508 fs/namespace.c:3834) __x64_sys_mount (fs/namespace.c:3848 fs/namespace.c:4057 fs/namespace.c:4034 fs/namespace.c:4034) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Fixes: 26abe14 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Tom Talpey <tom@talpey.com> Signed-off-by: Steve French <stfrench@microsoft.com>

Unloading the ice driver while switchdev port representors are added to a bridge can lead to kernel panic. Reproducer: modprobe ice devlink dev eswitch set $PF1_PCI mode switchdev ip link add $BR type bridge ip link set $BR up echo 2 > /sys/class/net/$PF1/device/sriov_numvfs sleep 2 ip link set $PF1 master $BR ip link set $VF1_PR master $BR ip link set $VF2_PR master $BR ip link set $PF1 up ip link set $VF1_PR up ip link set $VF2_PR up ip link set $VF1 up rmmod irdma ice When unloading the driver, ice_eswitch_detach() is eventually called as part of VF freeing. First, it removes a port representor from xarray, then unregister_netdev() is called (via repr->ops.rem()), finally representor is deallocated. The problem comes from the bridge doing its own deinit at the same time. unregister_netdev() triggers a notifier chain, resulting in ice_eswitch_br_port_deinit() being called. It should set repr->br_port = NULL, but this does not happen since repr has already been removed from xarray and is not found. Regardless, it finishes up deallocating br_port. At this point, repr is still not freed and an fdb event can happen, in which ice_eswitch_br_fdb_event_work() takes repr->br_port and tries to use it, which causes a panic (use after free). Note that this only happens with 2 or more port representors added to the bridge, since with only one representor port, the bridge deinit is slightly different (ice_eswitch_br_port_deinit() is called via ice_eswitch_br_ports_flush(), not ice_eswitch_br_port_unlink()). Trace: Oops: general protection fault, probably for non-canonical address 0xf129010fd1a93284: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0x8948287e8d499420-0x8948287e8d499427] (...) Workqueue: ice_bridge_wq ice_eswitch_br_fdb_event_work [ice] RIP: 0010:__rht_bucket_nested+0xb4/0x180 (...) Call Trace: (...) ice_eswitch_br_fdb_find+0x3fa/0x550 [ice] ? __pfx_ice_eswitch_br_fdb_find+0x10/0x10 [ice] ice_eswitch_br_fdb_event_work+0x2de/0x1e60 [ice] ? __schedule+0xf60/0x5210 ? mutex_lock+0x91/0xe0 ? __pfx_ice_eswitch_br_fdb_event_work+0x10/0x10 [ice] ? ice_eswitch_br_update_work+0x1f4/0x310 [ice] (...) A workaround is available: brctl setageing $BR 0, which stops the bridge from adding fdb entries altogether. Change the order of operations in ice_eswitch_detach(): move the call to unregister_netdev() before removing repr from xarray. This way repr->br_port will be correctly set to NULL in ice_eswitch_br_port_deinit(), preventing a panic. Fixes: fff292b ("ice: add VF representors one by one") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The RTC update work involves runtime resuming the UFS controller. Hence, only start the RTC update work after runtime power management in the UFS driver has been fully initialized. This patch fixes the following kernel crash: Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP Workqueue: events ufshcd_rtc_work Call trace: _raw_spin_lock_irqsave+0x34/0x8c (P) pm_runtime_get_if_active+0x24/0x9c (L) pm_runtime_get_if_active+0x24/0x9c ufshcd_rtc_work+0x138/0x1b4 process_one_work+0x148/0x288 worker_thread+0x2cc/0x3d4 kthread+0x110/0x114 ret_from_fork+0x10/0x20 Reported-by: Neil Armstrong <neil.armstrong@linaro.org> Closes: https://lore.kernel.org/linux-scsi/0c0bc528-fdc2-4106-bc99-f23ae377f6f5@linaro.org/ Fixes: 6bf999e ("scsi: ufs: core: Add UFS RTC support") Cc: Bean Huo <beanhuo@micron.com> Cc: stable@vger.kernel.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20241031212632.2799127-1-bvanassche@acm.org Reviewed-by: Peter Wang <peter.wang@mediatek.com> Reviewed-by: Bean Huo <beanhuo@micron.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

In unlikely event that we fail during sending the new VF GGTT configuration to the GuC, we will free only the GGTT node data struct but will miss to release the actual GGTT allocation. This will later lead to list corruption, GGTT space leak and finally risking crash when unloading the driver: [ ] ... [drm] GT0: PF: Failed to provision VF1 with 1073741824 (1.00 GiB) GGTT (-EIO) [ ] ... [drm] GT0: PF: VF1 provisioning remains at 0 (0 B) GGTT [ ] list_add corruption. next->prev should be prev (ffff88813cfcd628), but was 0000000000000000. (next=ffff88813cfe2028). [ ] RIP: 0010:__list_add_valid_or_report+0x6b/0xb0 [ ] Call Trace: [ ] drm_mm_insert_node_in_range+0x2c0/0x4e0 [ ] xe_ggtt_node_insert+0x46/0x70 [xe] [ ] pf_provision_vf_ggtt+0x7f5/0xa70 [xe] [ ] xe_gt_sriov_pf_config_set_ggtt+0x5e/0x770 [xe] [ ] ggtt_set+0x4b/0x70 [xe] [ ] simple_attr_write_xsigned.constprop.0.isra.0+0xb0/0x110 [ ] ... [drm] GT0: PF: Failed to provision VF1 with 1073741824 (1.00 GiB) GGTT (-ENOSPC) [ ] ... [drm] GT0: PF: VF1 provisioning remains at 0 (0 B) GGTT [ ] Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b7b: 0000 [#1] PREEMPT SMP NOPTI [ ] RIP: 0010:drm_mm_remove_node+0x1b7/0x390 [ ] Call Trace: [ ] <TASK> [ ] ? die_addr+0x2e/0x80 [ ] ? exc_general_protection+0x1a1/0x3e0 [ ] ? asm_exc_general_protection+0x22/0x30 [ ] ? drm_mm_remove_node+0x1b7/0x390 [ ] ggtt_node_remove+0xa5/0xf0 [xe] [ ] xe_ggtt_node_remove+0x35/0x70 [xe] [ ] xe_ttm_bo_destroy+0x123/0x220 [xe] [ ] intel_user_framebuffer_destroy+0x44/0x70 [xe] [ ] intel_plane_destroy_state+0x3b/0xc0 [xe] [ ] drm_atomic_state_default_clear+0x1cd/0x2f0 [ ] intel_atomic_state_clear+0x9/0x20 [xe] [ ] __drm_atomic_state_free+0x1d/0xb0 Fix that by using pf_release_ggtt() on the error path, which now works regardless if the node has GGTT allocation or not. Fixes: 34e8042 ("drm/xe: Make xe_ggtt_node struct independent") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241104144901.1903-1-michal.wajdeczko@intel.com (cherry picked from commit 43b1dd2) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

vp_modern_avq_cleanup() and vp_del_vqs() clean up admin vq resources by virtio_pci_vq_info pointer. The info pointer of admin vq is stored in vp_dev->admin_vq.info instead of vp_dev->vqs[]. Using the info pointer from vp_dev->vqs[] for admin vq causes a kernel NULL pointer dereference bug. In vp_modern_avq_cleanup() and vp_del_vqs(), get the info pointer from vp_dev->admin_vq.info for admin vq to clean up the resources. Also make info ptr as argument of vp_del_vq() to be symmetric with vp_setup_vq(). vp_reset calls vp_modern_avq_cleanup, and causes the Call Trace: ================================================================== BUG: kernel NULL pointer dereference, address:0000000000000000 ... CPU: 49 UID: 0 PID: 4439 Comm: modprobe Not tainted 6.11.0-rc5 #1 RIP: 0010:vp_reset+0x57/0x90 [virtio_pci] Call Trace: <TASK> ... ? vp_reset+0x57/0x90 [virtio_pci] ? vp_reset+0x38/0x90 [virtio_pci] virtio_reset_device+0x1d/0x30 remove_vq_common+0x1c/0x1a0 [virtio_net] virtnet_remove+0xa1/0xc0 [virtio_net] virtio_dev_remove+0x46/0xa0 ... virtio_pci_driver_exit+0x14/0x810 [virtio_pci] ================================================================== Fixes: 4c3b54a ("virtio_pci_modern: use completion instead of busy loop to wait on admin cmd result") Signed-off-by: Feng Liu <feliu@nvidia.com> Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Message-Id: <20241024135406.81388-1-feliu@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

In the error recovery path of mlx5_vdpa_dev_add(), the cleanup is executed and at the end put_device() is called which ends up calling mlx5_vdpa_free(). This function will execute the same cleanup all over again. Most resources support being cleaned up twice, but the recent mlx5_vdpa_destroy_mr_resources() doesn't. This change drops the explicit cleanup from within the mlx5_vdpa_dev_add() and lets mlx5_vdpa_free() do its work. This issue was discovered while trying to add 2 vdpa devices with the same name: $> vdpa dev add name vdpa-0 mgmtdev auxiliary/mlx5_core.sf.2 $> vdpa dev add name vdpa-0 mgmtdev auxiliary/mlx5_core.sf.3 ... yields the following dump: BUG: kernel NULL pointer dereference, address: 00000000000000b8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP CPU: 4 UID: 0 PID: 2811 Comm: vdpa Not tainted 6.12.0-rc6 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:destroy_workqueue+0xe/0x2a0 Code: ... RSP: 0018:ffff88814920b9a8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff888105c10000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff888100400168 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff888100120c00 R09: ffffffff828578c0 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff888131fd99a0 R14: 0000000000000000 R15: ffff888105c10580 FS: 00007fdfa6b4f740(0000) GS:ffff88852ca00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000b8 CR3: 000000018db09006 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x150/0x3e0 ? exc_page_fault+0x74/0x130 ? asm_exc_page_fault+0x22/0x30 ? destroy_workqueue+0xe/0x2a0 mlx5_vdpa_destroy_mr_resources+0x2b/0x40 [mlx5_vdpa] mlx5_vdpa_free+0x45/0x150 [mlx5_vdpa] vdpa_release_dev+0x1e/0x50 [vdpa] device_release+0x31/0x90 kobject_put+0x8d/0x230 mlx5_vdpa_dev_add+0x328/0x8b0 [mlx5_vdpa] vdpa_nl_cmd_dev_add_set_doit+0x2b8/0x4c0 [vdpa] genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x180/0x2b0 ? __vdpa_alloc_device+0x1b0/0x1b0 [vdpa] ? genl_family_rcv_msg_dumpit+0xf0/0xf0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1fc/0x2d0 netlink_sendmsg+0x1e4/0x410 __sock_sendmsg+0x38/0x60 ? sockfd_lookup_light+0x12/0x60 __sys_sendto+0x105/0x160 ? __count_memcg_events+0x53/0xe0 ? handle_mm_fault+0x100/0x220 ? do_user_addr_fault+0x40d/0x620 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fdfa6c66b57 Code: ... RSP: 002b:00007ffeace22998 EFLAGS: 00000202 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055a498608350 RCX: 00007fdfa6c66b57 RDX: 000000000000006c RSI: 000055a498608350 RDI: 0000000000000003 RBP: 00007ffeace229c0 R08: 00007fdfa6d35200 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000202 R12: 000055a4986082a0 R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffeace233f3 </TASK> Modules linked in: ... CR2: 00000000000000b8 Fixes: 6211165 ("vdpa/mlx5: Postpone MR deletion") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Message-Id: <20241105185101.1323272-2-dtatulea@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Eugenio Pérez <eperezma@redhat.com>

Eric reported a division by zero splat in the MPTCP protocol: Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 6094 Comm: syz-executor317 Not tainted 6.12.0-rc5-syzkaller-00291-g05b92660cdfe #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__tcp_select_window+0x5b4/0x1310 net/ipv4/tcp_output.c:3163 Code: f6 44 01 e3 89 df e8 9b 75 09 f8 44 39 f3 0f 8d 11 ff ff ff e8 0d 74 09 f8 45 89 f4 e9 04 ff ff ff e8 00 74 09 f8 44 89 f0 99 <f7> 7c 24 14 41 29 d6 45 89 f4 e9 ec fe ff ff e8 e8 73 09 f8 48 89 RSP: 0018:ffffc900041f7930 EFLAGS: 00010293 RAX: 0000000000017e67 RBX: 0000000000017e67 RCX: ffffffff8983314b RDX: 0000000000000000 RSI: ffffffff898331b0 RDI: 0000000000000004 RBP: 00000000005d6000 R08: 0000000000000004 R09: 0000000000017e67 R10: 0000000000003e80 R11: 0000000000000000 R12: 0000000000003e80 R13: ffff888031d9b440 R14: 0000000000017e67 R15: 00000000002eb000 FS: 00007feb5d7f16c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007feb5d8adbb8 CR3: 0000000074e4c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __tcp_cleanup_rbuf+0x3e7/0x4b0 net/ipv4/tcp.c:1493 mptcp_rcv_space_adjust net/mptcp/protocol.c:2085 [inline] mptcp_recvmsg+0x2156/0x2600 net/mptcp/protocol.c:2289 inet_recvmsg+0x469/0x6a0 net/ipv4/af_inet.c:885 sock_recvmsg_nosec net/socket.c:1051 [inline] sock_recvmsg+0x1b2/0x250 net/socket.c:1073 __sys_recvfrom+0x1a5/0x2e0 net/socket.c:2265 __do_sys_recvfrom net/socket.c:2283 [inline] __se_sys_recvfrom net/socket.c:2279 [inline] __x64_sys_recvfrom+0xe0/0x1c0 net/socket.c:2279 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7feb5d857559 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007feb5d7f1208 EFLAGS: 00000246 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 00007feb5d8e1318 RCX: 00007feb5d857559 RDX: 000000800000000e RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007feb5d8e1310 R08: 0000000000000000 R09: ffffffff81000000 R10: 0000000000000100 R11: 0000000000000246 R12: 00007feb5d8e131c R13: 00007feb5d8ae074 R14: 000000800000000e R15: 00000000fffffdef and provided a nice reproducer. The root cause is the current bad handling of racing disconnect. After the blamed commit below, sk_wait_data() can return (with error) with the underlying socket disconnected and a zero rcv_mss. Catch the error and return without performing any additional operations on the current socket. Reported-by: Eric Dumazet <edumazet@google.com> Fixes: 419ce13 ("tcp: allow again tcp_disconnect() when threads are waiting") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/8c82ecf71662ecbc47bf390f9905de70884c9f2d.1731060874.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot and Daan report a NULL pointer crash in the new full swap cluster reclaim work: > Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI > KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] > CPU: 1 UID: 0 PID: 51 Comm: kworker/1:1 Not tainted 6.12.0-rc6-syzkaller #0 > Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 > Workqueue: events swap_reclaim_work > RIP: 0010:__list_del_entry_valid_or_report+0x20/0x1c0 lib/list_debug.c:49 > Code: 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 48 89 fe 48 83 c7 08 48 83 ec 18 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 19 01 00 00 48 89 f2 48 8b 4e 08 48 b8 00 00 00 > RSP: 0018:ffffc90000bb7c30 EFLAGS: 00010202 > RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff88807b9ae078 > RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000008 > RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 > R10: 0000000000000001 R11: 000000000000004f R12: dffffc0000000000 > R13: ffffffffffffffb8 R14: ffff88807b9ae000 R15: ffffc90003af1000 > FS: 0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 00007fffaca68fb8 CR3: 00000000791c8000 CR4: 00000000003526f0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > Call Trace: > <TASK> > __list_del_entry_valid include/linux/list.h:124 [inline] > __list_del_entry include/linux/list.h:215 [inline] > list_move_tail include/linux/list.h:310 [inline] > swap_reclaim_full_clusters+0x109/0x460 mm/swapfile.c:748 > swap_reclaim_work+0x2e/0x40 mm/swapfile.c:779 The syzbot console output indicates a virtual environment where swapfile is on a rotational device. In this case, clusters aren't actually used, and si->full_clusters is not initialized. Daan's report is from qemu, so likely rotational too. Make sure to only schedule the cluster reclaim work when clusters are actually in use. Link: https://lkml.kernel.org/r/20241107142335.GB1172372@cmpxchg.org Link: https://lore.kernel.org/lkml/672ac50b.050a0220.2edce.1517.GAE@google.com/ Link: systemd/systemd#35044 Fixes: 5168a68 ("mm, swap: avoid over reclaim of full clusters") Reported-by: syzbot+078be8bfa863cb9e0c6b@syzkaller.appspotmail.com Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Daan De Meyer <daan.j.demeyer@gmail.com> Cc: Kairui Song <ryncsn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Accessing `mr_table->mfc_cache_list` is protected by an RCU lock. In the following code flow, the RCU read lock is not held, causing the following error when `RCU_PROVE` is not held. The same problem might show up in the IPv6 code path. 6.12.0-rc5-kbuilder-01145-gbac17284bdcb torvalds#33 Tainted: G E N ----------------------------- net/ipv4/ipmr_base.c:313 RCU-list traversed in non-reader section!! rcu_scheduler_active = 2, debug_locks = 1 2 locks held by RetransmitAggre/3519: #0: ffff88816188c6c0 (nlk_cb_mutex-ROUTE){+.+.}-{3:3}, at: __netlink_dump_start+0x8a/0x290 #1: ffffffff83fcf7a8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_dumpit+0x6b/0x90 stack backtrace: lockdep_rcu_suspicious mr_table_dump ipmr_rtm_dumproute rtnl_dump_all rtnl_dumpit netlink_dump __netlink_dump_start rtnetlink_rcv_msg netlink_rcv_skb netlink_unicast netlink_sendmsg This is not a problem per see, since the RTNL lock is held here, so, it is safe to iterate in the list without the RCU read lock, as suggested by Eric. To alleviate the concern, modify the code to use list_for_each_entry_rcu() with the RTNL-held argument. The annotation will raise an error only if RTNL or RCU read lock are missing during iteration, signaling a legitimate problem, otherwise it will avoid this false positive. This will solve the IPv6 case as well, since ip6mr_rtm_dumproute() calls this function as well. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20241108-ipmr_rcu-v2-1-c718998e209b@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The kdump kernel is broken on SME systems with CONFIG_IMA_KEXEC=y enabled. Debugging traced the issue back to b69a2af ("x86/kexec: Carry forward IMA measurement log on kexec"). Testing was previously not conducted on SME systems with CONFIG_IMA_KEXEC enabled, which led to the oversight, with the following incarnation: ... ima: No TPM chip found, activating TPM-bypass! Loading compiled-in module X.509 certificates Loaded X.509 cert 'Build time autogenerated kernel key: 18ae0bc7e79b64700122bb1d6a904b070fef2656' ima: Allocated hash algorithm: sha256 Oops: general protection fault, probably for non-canonical address 0xcfacfdfe6660003e: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-rc2+ torvalds#14 Hardware name: Dell Inc. PowerEdge R7425/02MJ3T, BIOS 1.20.0 05/03/2023 RIP: 0010:ima_restore_measurement_list Call Trace: <TASK> ? show_trace_log_lvl ? show_trace_log_lvl ? ima_load_kexec_buffer ? __die_body.cold ? die_addr ? exc_general_protection ? asm_exc_general_protection ? ima_restore_measurement_list ? vprintk_emit ? ima_load_kexec_buffer ima_load_kexec_buffer ima_init ? __pfx_init_ima init_ima ? __pfx_init_ima do_one_initcall do_initcalls ? __pfx_kernel_init kernel_init_freeable kernel_init ret_from_fork ? __pfx_kernel_init ret_from_fork_asm </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- ... Kernel panic - not syncing: Fatal exception Kernel Offset: disabled Rebooting in 10 seconds.. Adding debug printks showed that the stored addr and size of ima_kexec buffer are not decrypted correctly like: ima: ima_load_kexec_buffer, buffer:0xcfacfdfe6660003e, size:0xe48066052d5df359 Three types of setup_data info — SETUP_EFI, - SETUP_IMA, and - SETUP_RNG_SEED are passed to the kexec/kdump kernel. Only the ima_kexec buffer experienced incorrect decryption. Debugging identified a bug in early_memremap_is_setup_data(), where an incorrect range calculation occurred due to the len variable in struct setup_data ended up only representing the length of the data field, excluding the struct's size, and thus leading to miscalculation. Address a similar issue in memremap_is_setup_data() while at it. [ bp: Heavily massage. ] Fixes: b3c72fc ("x86/boot: Introduce setup_indirect") Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20240911081615.262202-3-bhe@redhat.com

Dave Martin and others added 23 commits July 9, 2019 13:14

arm64: ilp32: add documentation on the ILP32 ABI for ARM64

8f9e256

Based on Andrew Pinski's patch-series. Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Yury Norov <ynorov@marvell.com>

arm64: introduce AUDIT_ARCH_AARCH64ILP32 for ilp32

2312ac1

syscall_get_arch() currently makes no difference between arm64 and arm64/ilp32. Fix it by adding AUDIT_ARCH_AARCH64ILP32. Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Yury Norov <ynorov@marvell.com>

arm64: ilp32: introduce binfmt_ilp32.c

8fde72a

Like binfmt_elf32.c for AARCH32, binfmt_ilp32.c is needed to handle ILP32 binaries. Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Bamvor Jian Zhang <bamv2005@gmail.com> Signed-off-by: Yury Norov <ynorov@marvell.com>

viordash closed this Oct 30, 2024

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Ilp32 5.2 #1

Ilp32 5.2 #1

viordash commented Oct 30, 2024

Ilp32 5.2 #1

Ilp32 5.2 #1

Conversation

viordash commented Oct 30, 2024