Add XGP-11 #18
Comments
|
Lars,
> New disk images needed to pick up ITS configuration updates. (Or add a few lines to CONFIG and reassemble ITS.)
Shall I 'git pull' from the ITS repository and rebuild the disk iamges, or do you have them ready perhaps?
Nice! Do you propose we add it by default to the ITS boot script, like I did for the Knight TV? So it is always running? Not sure if it is a major extra load on the CPU, we could also make it an option.
(My idea is to enable by default, and tell people that if they run on a Pi 3, they should disable it in the boot script)
> Profit!
Why use a primitive PC with Adobe PageMaker when you can do your publishing on a proper mainframe for a fraction of the cost? I see a new market.
Kind regards,
Oscar.
|
|
The latest images should always be available here: http://hactrn.kostersitz.com/ I'm not sure about starting by default. The XGP-11 is much easier to start/stop after ITS has booted, so maybe not. Also, the user must grab some terminal and log in there as the XGP user. That is to load the XGP-11 code, and start the XGPSPL spooler job. |
|
Lars,
OK. So I make the XGP part of my 'pdp' command script, start/stop it.
I didn't realise Mike Kostersitz was an ITS insider! Glad that I sent him a kit, I missed that point.
The Raspberry Pi people will do an article about the PiDP-10 and ITS, they'll write it this weekend. I just need some high-res Glamour shots of the PiDP-10. If you have some pictures that you think are good for publication, I'd be happy to get them. Not only am I not much of a photographer, but my boat and $170 mobile phone are not the very best setup for Glamour Shots. But I'll try!
Kind regards,
Oscar.
…________________________________
From: Lars Brinkhoff ***@***.***>
Sent: Friday, March 22, 2024 4:00 PM
To: obsolescence/pidp10 ***@***.***>
Cc: Oscar ***@***.***>; Comment ***@***.***>
Subject: Re: [obsolescence/pidp10] Add XGP-11 (Issue #18)
The latest images should always be available here: http://hactrn.kostersitz.com/
I'm not sure about starting by default. The XGP-11 is much easier to start/stop after ITS has booted, so maybe not. Also, the user must grab some terminal and log in there as the XGP user. That is to load the XGP-11 code, and start the XGPSPL spooler job.
—
Reply to this email directly, view it on GitHub<#18 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AB26BDNLJ6SCK6TZOL4TKDLYZRBQRAVCNFSM6AAAAABFDMPPVWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMJVGI4DSNZRGM>.
You are receiving this because you commented.Message ID: ***@***.***>
|
|
Most of my house is overrun with Legos, so it's hard to find a good glamorous spot. I'm glad you have found use for my exploded view. I kind of like my latest photo on Twitter, with switches, keys, and knobs to rival an IBM; get that if you like. |
|
Will do!
Working on you presentation outline, was disrupted for a bit.
…________________________________
From: Lars Brinkhoff ***@***.***>
Sent: Friday, March 22, 2024 4:42 PM
To: obsolescence/pidp10 ***@***.***>
Cc: Oscar ***@***.***>; Comment ***@***.***>
Subject: Re: [obsolescence/pidp10] Add XGP-11 (Issue #18)
Most of my house is overrun with Legos, so it's hard to find a good glamorous spot. I'm glad you have found use for my exploded view. I kind of like my latest photo on Twitter, with switches, keys, and knobs to rival an IBM; get that if you like.
—
Reply to this email directly, view it on GitHub<#18 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AB26BDKLERIFZ5DBISLZK6LYZRGP7AVCNFSM6AAAAABFDMPPVWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMJVGM3TANJUGM>.
You are receiving this because you commented.Message ID: ***@***.***>
|
|
I know this is a bit older thread, but I am catching up on ITS again, I got the latest emulator images running. When I go and run |
|
|
Lars,
Thanks! I will add XGP support next week. I was just knocked out for a full week sith this stupid Fog, and will focus in the PiDP-1 this week. I've kept Angelo waiting for far too long 🙁
Any other things to work on for the PiDP-10 Github? Or more radically, if you want access to that Github yourself I'm happy to 'give you a set of the keys' to the Github, now that I am so slow!
Kind regards,
Oscar.
…________________________________
From: Lars Brinkhoff ***@***.***>
Sent: Wednesday, November 6, 2024 7:31 AM
To: obsolescence/pidp10 ***@***.***>
Cc: Oscar ***@***.***>; Comment ***@***.***>
Subject: Re: [obsolescence/pidp10] Add XGP-11 (Issue #18)
* You need to start a PDP-11 emulator called "xgp11" and have it talk to the PDP-10 emulator.
* The instructions from STUFF refer to the PDP-11. You should not do anything to address 0 on the PDP-10.
* There is this: https://github.com/larsbrinkhoff/its-manual/wiki/Printing#the-xgp-printer, but it doesn't say exactly how to run the xgp11 emulator.
* You need this for pdp10-ka: https://github.com/PDP-10/its/blob/master/build/mchn/KA/run#L37,
and this to start xgp11: https://github.com/PDP-10/its/blob/master/build/pdp10-ka/start#L47
—
Reply to this email directly, view it on GitHub<#18 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AB26BDIZSTPWNYGI5YBGRUTZ7GZSXAVCNFSM6AAAAABRHM6QLWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINJYHAYTSMZQGA>.
You are receiving this because you commented.
|
|
THanks Oscar,
Happy to help maintain both repos, the PiDP-10 and RPDP ones.
Mike
…________________________________
From: Oscar ***@***.***>
Sent: Monday, November 18, 2024 7:29 AM
To: obsolescence/pidp10 ***@***.***>
Cc: Mike Kostersitz (Oilcan Productions) ***@***.***>; Comment ***@***.***>
Subject: Re: [obsolescence/pidp10] Add XGP-11 (Issue #18)
Lars,
Thanks! I will add XGP support next week. I was just knocked out for a full week sith this stupid Fog, and will focus in the PiDP-1 this week. I've kept Angelo waiting for far too long 🙁
Any other things to work on for the PiDP-10 Github? Or more radically, if you want access to that Github yourself I'm happy to 'give you a set of the keys' to the Github, now that I am so slow!
Kind regards,
Oscar.
________________________________
From: Lars Brinkhoff ***@***.***>
Sent: Wednesday, November 6, 2024 7:31 AM
To: obsolescence/pidp10 ***@***.***>
Cc: Oscar ***@***.***>; Comment ***@***.***>
Subject: Re: [obsolescence/pidp10] Add XGP-11 (Issue #18)
* You need to start a PDP-11 emulator called "xgp11" and have it talk to the PDP-10 emulator.
* The instructions from STUFF refer to the PDP-11. You should not do anything to address 0 on the PDP-10.
* There is this: https://github.com/larsbrinkhoff/its-manual/wiki/Printing#the-xgp-printer, but it doesn't say exactly how to run the xgp11 emulator.
* You need this for pdp10-ka: https://github.com/PDP-10/its/blob/master/build/mchn/KA/run#L37,
and this to start xgp11: https://github.com/PDP-10/its/blob/master/build/pdp10-ka/start#L47
—
Reply to this email directly, view it on GitHub<#18 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AB26BDIZSTPWNYGI5YBGRUTZ7GZSXAVCNFSM6AAAAABRHM6QLWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINJYHAYTSMZQGA>.
You are receiving this because you commented.
—
Reply to this email directly, view it on GitHub<#18 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ASO6P5OBWHMBEYKW2NC2N6T2BIBWRAVCNFSM6AAAAABRHM6QLWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDIOBTGM4DANJQGY>.
You are receiving this because you commented.Message ID: ***@***.***>
|
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add XGP-11 as per recent ITS updates.
at -u ten11 line=0,10011at -u ten11 line=1,10021tools/tv11/xgp11 -s1 -p 10021 localhostThe text was updated successfully, but these errors were encountered: