Support

GitHub Issues are not used to manage issues for this repository. Please report any issues you may have on the ETT Google Group. Our technical team will address all questions there. Thank you.

Reference C-CDA Configuration and Deployment

This document is meant to outline the steps to successfully configure and deploy the reference ccda application.

If you would like to get a test virtual machine up and running quickly, check out https://github.com/mieweb/vagrant-ccda-validator for a Vagrant build or https://github.com/mieweb/docker-ccda-validator for a docker container. Note: These are 3rd-party options and are not directly supported by SITE/the ONC. They intend to pull, configure, and deploy the data from our codebase based on these instructions. Otherwise, please continue to follow the full instructions below to create a local, external, or customized instance of the validator.

1. Assumptions

a. Tomcat 8.5.x (8.5.81 recommended) or above has been installed and NOT running. ((https://tomcat.apache.org/download-80.cgi#8.5.85))
b. You are using a pre-built referenceccdaservice.war file. In other words, the .war file was not built from the project directly.
    Such a thing is possible but beyond the scope of this document.
c. With Tomcat installed and the referenceccdaservice.war in your hands, you are ready to begin configuration and deployment.
d. Java 8 is installed and a JAVA_HOME is set. We do not support any Java version above JDK 8.

2. Configuration Instructions

• Vocabulary Artifacts needed for vocabulary validation (please see https://github.com/onc-healthit/code-validator-api and https://github.com/onc-healthit/code-validator-api/tree/master/codevalidator-api/docs for further information)
• Scenario files needed for content validation (based on https://github.com/onc-healthit/content-validator-api)
  • If not wanting to perform content validation, it is OK to have an empty scenario directory. The application will startup fine and validate correctly as long as a scenario isn't sent in the API. It will still perform IG and Vocabulary validation as needed.
  • The scenario files used in SITE are located here: https://github.com/onc-healthit/2015-certification-ccda-testdata
• The war
  • Get the latest war here https://github.com/onc-healthit/reference-ccda-validator/releases
• Server (tomcat) configuration
  • Get the latest configuration file, ccdaReferenceValidatorConfig.xml, here https://github.com/onc-healthit/reference-ccda-validator/tree/master/configuration
  • Note: Please watch out for any updates to this file for each release in order keep your validator up to date as it is not included with the WAR

Vocabulary Artifacts

  1. Create a directory that will hold the vocabulary artifacts. For example, path/to/configs_folder
      a. this folder will contain the needed vocabulary configuration files

  2. Place the default ccdaReferenceValidatorConfig.xml in this folder. For example, path/to/configs_folder/ccdaReferenceValidatorConfig.xml. This file is located in this repository.
      a. this file contains the xpath expressions that target particular nodes in the given C-CDA to be validated. Each expression is configured with at least one validator. For example:

       <expression xpathExpression="/v3:ClinicalDocument/v3:templateId[@root='2.16.840.1.113883.10.20.22.1.1' and @extension='2015-08-01']/ancestor::v3:ClinicalDocument[1]/v3:confidentialityCode[not(@nullFlavor)]">
       		<validator>
      			<name>ValueSetCodeValidator</name>
       			<validationResultSeverityLevels>
       				<codeSeverityLevel>SHOULD</codeSeverityLevel>
       			</validationResultSeverityLevels>
      			<allowedValuesetOids>2.16.840.1.113883.1.11.16926</allowedValuesetOids>
      		</validator>
      	</expression>

3. Create a local directory for Codes, Valuesets and Scenario files. For example,
   a. path/to/validator_configuration/vocabulary/code_repository/
   b. path/to/validator_configuration/vocabulary/valueset_repository/VSAC/
   c. path/to/validator_configuration/scenarios/
   
4. Optional: Add custom configurations to the existing path (path/to/your/configs_folder) or create a separate local directory for your custom vocabulary configurations (xml files). Using the existing path is preferred but either option works fine. This allows one to take advantage of dynamic vocabulary configurations which can be changed in realtime for each validation via the API by sending the "vocabularyConfig" key and the filename without extension as the value. The default configuration file is the one that was added earlier and is located in this repository (ccdaReferenceValidatorConfig.xml). If "referenceccda.isDynamicVocab" is set to "false" or not set at all the default file (ccdaReferenceValidatorConfig.xml) will be used. If it is set to "true" and the path is set as described, one can use any config in the directory.

NOTES:

• For the valueset_repository, assuming the path above of /path/to/validator_configuration/vocabulary/valueset_repository/VSAC/, please ensure that the valueset repository spreadsheet files are in the aformentioned subfolder labeled VSAC. However, please do NOT include this VSAC folder in the referenceccdaservice.xml config file. So in this example, the actual path on the user computer or server would be /path/to/validator_configuration/vocabulary/valueset_repository/VSAC/ where as the path saved in the referenceccdaservice.xml config file referenceccdaservice.xml would be /path/to/validator_configuration/vocabulary/valueset_repository/
• Most of the code systems and valuesets are externally published and this project does NOT come packaged with any of these externally published files. However, valuesets which were not externally published by VSAC were hand created by SITE and are available for download here: https://github.com/onc-healthit/code-validator-api/tree/master/codevalidator-api/docs/ValueSetsHandCreatedbySITE

• Code System - defines a set of codes with meanings (also known as enumeration, terminology, classification, and/or ontology)
  CDT
  CPT
  HCPCS
  ICD9CM_SG
  ICD10CM
  ICD10PCS
  LOINC
  RXNORM
  SNOMED-CT
• Value Set - selects a set of codes from those defined by one or more code systems VSAC
  To learn more about value sets and code systems, go to: VSAC Support

The referenceccdaservice.war

1. Navigate to the webapps directory in your Tomcat instance. For example, ~/apache-tomcat-7.0.53/webapps
2. Place the referenceccdaservice.war file here

Server Configuration

1. Place a copy of referenceccdaservice.xml in $CATALINA_BASE/conf/[enginename]/[hostname]/
Note: You will likely be using the "Catalina" engine and the default host for Tomcat is "localhost". 
For example, ~/apache-tomcat-7.0.53/conf/Catalina/localhost

At this point, your directory structure should contain at least the following:
-tomcat
--conf
---Catalina
----localhost
----referenceccdaservice.xml
--webapps
---referenceccdaservice.war  

2. Edit the referenceccdaservice.xml key values to point to the locations configured in the previous steps and setup other values. For example:
        <Context reloadable="true">
            <Parameter name="vocabulary.localCodeRepositoryDir" value="path/to/your/code_repository" override="true"/>
            <Parameter name="vocabulary.localValueSetRepositoryDir" value="path/to/your/valueset_repository" override="true"/>
            <Parameter name="referenceccda.configFile" value="path/to/your/configs_folder/ccdaReferenceValidatorConfig.xml" override="true"/>
            <Parameter name="referenceccda.isDynamicVocab" value="false" override="true"/>
            <Parameter name="referenceccda.configFolder" value="path/to/your/configs_folder" override="true"/>
            <Parameter name="content.scenariosDir" value="path/to/your/scenarios_directory" override="true"/>

            <Parameter name="keycloak.enabled" value="false" override="true"/>
            <Parameter name="keycloak.auth.server" value="Replace with KeyCloak auth URL" override="true"/>
            <Parameter name="keycloak.realm" value="Replace with KeyCloak Realm" override="true"/>
            <Parameter name="keycloak.client.id" value="Replace with KeyCloak client id for introspect" override="true"/>
            <Parameter name="keycloak.client.secret" value="Replace with KeyCloak client secret for introspect" override="true"/>
         </Context>
         
3. To disable KeyCloak set keycloak.enabled flag to false

3. Run the application

1. Start your tomcat instance - you should see output showing the databases getting initialized and the .war file getting deployed.
NOTE: Allow a few minutes for the vocabulary valuesets and codes to be inserted into the in-memory database.
2. Access the endpoint. For example, localhost:8080/referenceccdaservice/
3. For convenience, API documentation and a validation UI is included:
    API documentation - /referenceccdaservice/swagger-ui.html
    UI - referenceccdaservice/ui

4. Troubleshooting (please feel free to submit PRs with updates from your own issues/solutions)

• The best way to resolve an issue is to refer to the log at tomcat/logs/referenceccdaservice.<TODAY'S DATE>.log. The errors in that log along with the various documentation for this project and its dependencies should help point to a resolution. If there is still confusion, ahead are some examples and their solutions:
  • The log states, "LOADING SCENARIO FILES AT /opt/apache-tomcat-8.5.85/mdht/Environment/VocabularyConfiguration/scenarios/" instead of the directory you have specified in your ccdaReferenceValidatorConfig.xml which exists on your computer or server
    • The ccdaReferenceValidatorConfig.xml configuration file is designed to override default settings with your local settings/directory setup. What this message means (if the path doesn't match you local file structure) is that the application has not found your ccdaReferenceValidatorConfig.xml file. Please ensure that you have taken the latest version from here https://github.com/onc-healthit/reference-ccda-validator/tree/master/configuration and have placed it in a path similar to tomcat/conf/Catalina/localhost
  • The log states, "nested exception is java.lang.OutOfMemoryError: GC overhead limit exceeded"
    • It is recommended that your computer has at least 4GBs of RAM as the software loads all of the vocabulary into RAM. It uses an "in-memory database" on boot so it's very RAM intensive. However, just because you have the RAM doesn't mean Java is handling it appropriately. If you have enough RAM free and there is still an issue, please ensure you are using Java 8 and create a file named setenv.sh (.bat for windows) file in your tomcat/bin directory. Please include the following data within that file:

      •     #!/bin/bash
            JAVA_HOME=/usr/lib/jvm/java-8-oracle
            JAVA_OPTS="$JAVA_OPTS -Xmx5120m -XX:MaxPermSize=1024m"
        

  • The log states, "Could not resolve dependencies for project ..."
    • Likely caused by an inproper configuration installation of Java. Make sure the JAVA_HOME and JRE_HOME environment variables are set properly and you are using a version of Java 8. Also check the build path in your IDE. At the time of this documentation, the version of Java used is 1.8.0_361.

5. API Usage

• You can find API documentation on a local installation here via swagger:
  • https://localhost:8080/referenceccdaservice/swagger-ui.html#/reference-ccda-validation-controller
• API:
  • https://localhost:8080/referenceccdaservice/
• form-data
  • ccdaFile: file
  • referenceFileName: string of filename or empty
  • validationObjective: C-CDA_IG_Plus_Vocab
• If you want to use the cures update, add:
  • curesUpdate: true
• Or if you want SVAP 2022 or SVAP 2023, add:
  • svap2022: true
  • or
  • svap2023: true