Use docker compose in otel collector example

CHANGELOG.md

@@ -48,6 +48,7 @@ This project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.htm
 
 - Update `go.opentelemetry.io/proto/otlp` from v1.1.0 to v1.2.0. (#5177)
 - Improve performance of baggage member character validation in `go.opentelemetry.io/otel/baggage`. (#5214)
+- The `otel-collector` example now uses docker compose to bring up services instead of kubernetes. (#5244)
 
 ## [1.25.0/0.47.0/0.0.8/0.1.0-alpha] 2024-04-05
 

example/otel-collector/README.md

@@ -13,165 +13,17 @@ App + SDK ---> OpenTelemetry Collector ---|
 
 # Prerequisites
 
-You will need access to a Kubernetes cluster for this demo. We use a local
-instance of [microk8s](https://microk8s.io/), but please feel free to pick
-your favorite. If you do decide to use microk8s, please ensure that dns
-and storage addons are enabled
+You will need [Docker Compose V2](https://docs.docker.com/compose/) installed for this demo.
 
-```bash
-microk8s enable dns storage
-```
-
-For simplicity, the demo application is not part of the k8s cluster, and will
-access the OpenTelemetry Collector through a NodePort on the cluster. Note that
-the NodePort opened by this demo is not secured.
-
-Ideally you'd want to either have your application running as part of the
-kubernetes cluster, or use a secured connection (NodePort/LoadBalancer with TLS
-or an ingress extension).
-
-If not using microk8s, ensure that cert-manager is installed by following [the
-instructions here](https://cert-manager.io/docs/installation/).
-
-# Deploying to Kubernetes
-
-All the necessary Kubernetes deployment files are available in this demo, in the
-[k8s](./k8s) folder. For your convenience, we assembled a [makefile](./Makefile)
-with deployment commands (see below). For those with subtly different systems,
-you are, of course, welcome to poke inside the Makefile and run the commands
-manually. If you use microk8s and alias `microk8s kubectl` to `kubectl`, the
-Makefile will not recognize the alias, and so the commands will have to be run
-manually.
-
-## Setting up the Prometheus operator
-
-If you're using microk8s like us, simply do
-
-```bash
-microk8s enable prometheus
-```
-
-and you're good to go. Move on to [Using the makefile](#using-the-makefile).
-
-Otherwise, obtain a copy of the Prometheus Operator stack from
-[prometheus-operator](https://github.com/prometheus-operator/kube-prometheus):
-
-```bash
-git clone https://github.com/prometheus-operator/kube-prometheus.git
-cd kube-prometheus
-kubectl create -f manifests/setup
-
-# wait for namespaces and CRDs to become available, then
-kubectl create -f manifests/
-```
-
-And to tear down the stack when you're finished:
-
-```bash
-kubectl delete --ignore-not-found=true -f manifests/ -f manifests/setup
-```
-
-## Using the makefile
-
-Next, we can deploy our Jaeger instance, Prometheus monitor, and Collector
-using the [makefile](./Makefile).
-
-```bash
-# Create the namespace
-make namespace-k8s
-
-# Deploy Jaeger operator
-make jaeger-operator-k8s
-
-# After the operator is deployed, create the Jaeger instance
-make jaeger-k8s
+# Deploying to docker compose
 
-# Then the Prometheus instance. Ensure you have enabled a Prometheus operator
-# before executing (see above).
-make prometheus-k8s
-
-# Finally, deploy the OpenTelemetry Collector
-make otel-collector-k8s
-```
-
-If you want to clean up after this, you can use the `make clean-k8s` to delete
-all the resources created above. Note that this will not remove the namespace.
-Because Kubernetes sometimes gets stuck when removing namespaces, please remove
-this namespace manually after all the resources inside have been deleted,
-for example with
+This command will bring up the OpenTelemetry Collector, Jaeger, and Prometheus, and
+expose the necessary ports for you to view the data.
 
 ```bash
-kubectl delete namespaces observability
-```
-
-# Configuring the OpenTelemetry Collector
-
-Although the above steps should deploy and configure everything, let's spend
-some time on the [configuration](./k8s/otel-collector.yaml) of the Collector.
-
-One important part here is that, in order to enable our application to send data
-to the OpenTelemetry Collector, we need to first configure the `otlp` receiver:
-
-```yml
-...
-  otel-collector-config: |
-    receivers:
-      # Make sure to add the otlp receiver.
-      # This will open up the receiver on port 4317.
-      otlp:
-        protocols:
-          grpc:
-            endpoint: "0.0.0.0:4317"
-    processors:
-...
-```
-
-This will create the receiver on the Collector side, and open up port `4317`
-for receiving traces.
-
-The rest of the configuration is quite standard, with the only mention that we
-need to create the Jaeger and Prometheus exporters:
-
-```yml
-...
-    exporters:
-      jaeger:
-        endpoint: "jaeger-collector.observability.svc.cluster.local:14250"
-
-      prometheus:
-           endpoint: 0.0.0.0:8889
-           namespace: "testapp"
-...
+docker compose up -d
 ```
 
-## OpenTelemetry Collector service
-
-One more aspect in the OpenTelemetry Collector [configuration](./k8s/otel-collector.yaml) worth looking at is the NodePort service used for accessing it:
-
-```yaml
-apiVersion: v1
-kind: Service
-metadata:
-        ...
-spec:
-  ports:
-  - name: otlp # Default endpoint for otlp receiver.
-    port: 4317
-    protocol: TCP
-    targetPort: 4317
-    nodePort: 30080
-  - name: metrics # Endpoint for metrics from our app.
-    port: 8889
-    protocol: TCP
-    targetPort: 8889
-  selector:
-    component: otel-collector
-  type:
-    NodePort
-```
-
-This service will bind the `4317` port used to access the otlp receiver to port `30080` on your cluster's node. By doing so, it makes it possible for us to access the Collector by using the static address `<node-ip>:30080`. In case you are running a local cluster, this will be `localhost:30080`. Note that you can also change this to a LoadBalancer or have an ingress extension for accessing the service.
-
 # Running the code
 
 You can find the complete code for this example in the [main.go](./main.go)
@@ -192,40 +44,20 @@ sample application
 
 ## Jaeger UI
 
-First, we need to enable an ingress provider. If you've been using microk8s,
-do
-
-```bash
-microk8s enable ingress
-```
-
-Then find out where the Jaeger console is living:
-
-```bash
-kubectl get ingress --all-namespaces
-```
-
-For us, we get the output
-
-```
-NAMESPACE       NAME           CLASS    HOSTS   ADDRESS     PORTS   AGE
-observability   jaeger-query   <none>   *       127.0.0.1   80      5h40m
-```
-
-indicating that the Jaeger UI is available at
-[http://localhost:80](http://localhost:80). Navigate there in your favorite
+The Jaeger UI is available at
+[http://localhost:16686](http://localhost:16686). Navigate there in your favorite
 web-browser to view the generated traces.
 
 ## Prometheus
 
-Unfortunately, the Prometheus operator doesn't provide a convenient
-out-of-the-box ingress route for us to use, so we'll use port-forwarding
-instead. Note: this is a quick-and-dirty solution for the sake of example.
-You *will* be attacked by shady people if you do this in production!
+The Prometheus UI is available at
+[http://localhost:9090](http://localhost:9090). Navigate there in your favorite
+web-browser to view the generated metrics.
+
+# Shutting down
+
+To shut down and clean the example, run
 
 ```bash
-kubectl --namespace monitoring port-forward svc/prometheus-k8s 9090
+docker compose down
 ```
-
-Then navigate to [http://localhost:9090](http://localhost:9090) to view
-the Prometheus dashboard.

example/otel-collector/docker-compose.yaml

@@ -0,0 +1,23 @@
+# Copyright The OpenTelemetry Authors
+# SPDX-License-Identifier: Apache-2.0
+
+services:
+  otel-collector:
+    image: otel/opentelemetry-collector-contrib:0.91.0
+    command: ["--config=/etc/otel-collector.yaml"]
+    volumes:
+      - ./otel-collector.yaml:/etc/otel-collector.yaml
+    ports:
+      - 4317:4317
+
+  prometheus:
+    image: prom/prometheus:v2.45.2
+    volumes:
+      - ./prometheus.yaml:/etc/prometheus/prometheus.yml
+    ports:
+      - 9090:9090
+
+  jaeger:
+    image: jaegertracing/all-in-one:1.52
+    ports:
+      - 16686:16686