[rfxcom] Worked on repairing support for RFXThermostat3 messages

bundles/org.openhab.binding.rfxcom/README.md

@@ -154,11 +154,13 @@ This binding currently supports following channel types:
 |-----------------|---------------|------------------------------------------------------------------------------------|
 | chimesound | Number | Id of the chime sound |
 | command | Switch | Command channel. |
-| commandId | String | Id of the command. |
+ | commandId | Number | Id of the command (between 0 and 255). |
+| commandString | String | Id of the command. |
 | contact | Contact | Contact channel. |
 | datetime | DateTime | DateTime channel. |
 | dimminglevel | Dimmer | Dimming level channel. |
 | forecast | String | Weather forecast from device: NO\_INFO\_AVAILABLE/SUNNY/PARTLY\_CLOUDY/CLOUDY/RAIN |
+| tempcontrol | Rollershutter | Global control for temperature also setting ON, OFF, UP, DOWN |
 | humidity | Number | Relative humidity level in percentages. |
 | humiditystatus | String | Current humidity status: NORMAL/COMFORT/DRY/WET |
 | instantamp | Number | Instant current in Amperes. |
@@ -964,10 +966,31 @@ A Thermostat3 device.
 
 #### Channels
 
-| Name | Channel Type | Item Type | Remarks |
-|-------------|-------------------------------------|-----------|----------|
-| command | [command](#channels) | Switch | |
-| signalLevel | [system.signal-strength](#channels) | Number | |
+| Name | Channel Type | Item Type | Remarks |
+|-------------------|-------------------------------------|---------------|----------|
+| command | [command](#channels) | Switch | |
+| command2nd | [command](#channels) | Switch | |
+| control\* | [tempcontrol](#channels) | Rollershutter | |
+| commandString\*\* | [commandString](#channels) | String | |
+| signalLevel | [system.signal-strength](#channels) | Number | |
+
+\* `control` supports:
+
+* UP
+* DOWN
+* STOP
+
+\*\* `commandString` supports:
+
+* OFF
+* ON
+* UP
+* DOWN
+* RUN_UP
+* RUN_DOWN
+* SECOND_ON
+* SECOND_OFF
+* STOP
 
 #### Configuration Options
 
@@ -982,6 +1005,8 @@ A Thermostat3 device.
  * MERTIK\_\_G6R\_H4TD\_\_G6R\_H4T16 - Mertik (G6R H4TD or G6R H4T16)
  * MERTIK\_\_G6R\_H4S\_TRANSMIT\_ONLY - Mertik (G6R H4S \- transmit only)
 
+#### Examples
+
 
 ### undecoded - RFXCOM Undecoded RF Messages
 

bundles/org.openhab.binding.rfxcom/src/main/java/org/openhab/binding/rfxcom/internal/DeviceMessageListener.java

@@ -28,9 +28,9 @@ public interface DeviceMessageListener {
  * This method is called whenever the message is received from the bridge.
  *
  * @param bridge
- * The RFXCom bridge where message is received.
+ *  The RFXCom bridge where message is received.
  * @param message
- * The message which received.
+ *  The message which received.
  */
  void onDeviceMessageReceived(ThingUID bridge, RFXComDeviceMessage message) throws RFXComException;
 }

bundles/org.openhab.binding.rfxcom/src/main/java/org/openhab/binding/rfxcom/internal/RFXComBindingConstants.java

@@ -67,8 +67,11 @@ public class RFXComBindingConstants {
  public static final String CHANNEL_VENETIAN_BLIND = "venetianBlind";
  public static final String CHANNEL_SUN_WIND_DETECTOR = "sunWindDetector";
  public static final String CHANNEL_COMMAND = "command";
+ public static final String CHANNEL_COMMAND_SECOND = "command2nd";
+ public static final String CHANNEL_CONTROL = "control";
  public static final String CHANNEL_PROGRAM = "program";
  public static final String CHANNEL_COMMAND_ID = "commandId";
+ public static final String CHANNEL_COMMAND_STRING = "commandString";
  public static final String CHANNEL_MOOD = "mood";
  public static final String CHANNEL_SIGNAL_LEVEL = "signalLevel";
  public static final String CHANNEL_DIMMING_LEVEL = "dimmingLevel";

bundles/org.openhab.binding.rfxcom/src/main/java/org/openhab/binding/rfxcom/internal/connector/RFXComConnectorInterface.java

@@ -27,8 +27,8 @@ public interface RFXComConnectorInterface {
  * Procedure for connecting to RFXCOM controller.
  *
  * @param device
- * Controller connection parameters (e.g. serial port name or IP
- * address).
+ *  Controller connection parameters (e.g. serial port name or IP
+ *  address).
  */
  public void connect(RFXComBridgeConfiguration device) throws Exception;
 
@@ -42,23 +42,23 @@ public interface RFXComConnectorInterface {
  * Procedure for send raw data to RFXCOM controller.
  *
  * @param data
- * raw bytes.
+ *  raw bytes.
  */
  public void sendMessage(byte[] data) throws IOException;
 
  /**
  * Procedure for register event listener.
  *
  * @param listener
- * Event listener instance to handle events.
+ *  Event listener instance to handle events.
  */
  public void addEventListener(RFXComEventListener listener);
 
  /**
  * Procedure for remove event listener.
  *
  * @param listener
- * Event listener instance to remove.
+ *  Event listener instance to remove.
  */
  public void removeEventListener(RFXComEventListener listener);
 

bundles/org.openhab.binding.rfxcom/src/main/java/org/openhab/binding/rfxcom/internal/connector/RFXComEventListener.java

@@ -23,15 +23,15 @@ public interface RFXComEventListener {
  * Procedure for receive raw data from RFXCOM controller.
  *
  * @param data
- * Received raw data.
+ *  Received raw data.
  */
  void packetReceived(byte[] data);
 
  /**
  * Procedure for receiving information fatal error.
  *
  * @param error
- * Error occurred.
+ *  Error occurred.
  */
  void errorOccurred(String error);
 

bundles/org.openhab.binding.rfxcom/src/main/java/org/openhab/binding/rfxcom/internal/handler/RFXComHandler.java

@@ -141,13 +141,17 @@ public void onDeviceMessageReceived(ThingUID bridge, RFXComDeviceMessage message
  updateStatus(ThingStatus.ONLINE);
 
  for (Channel channel : getThing().getChannels()) {
- String channelId = channel.getUID().getId();
+ ChannelUID uid = channel.getUID();
+ String channelId = uid.getId();
 
  try {
  if (channelId.equals(CHANNEL_LOW_BATTERY)) {
- updateState(channelId, isLowBattery(message.convertToState(CHANNEL_BATTERY_LEVEL)));
+ updateState(uid, isLowBattery(message.convertToState(CHANNEL_BATTERY_LEVEL)));
  } else {
- updateState(channelId, message.convertToState(channelId));
+ State state = message.convertToState(channelId);
+ if (state != null) {
+ updateState(uid, state);
+ }
  }
  } catch (RFXComException e) {
  logger.trace("{} does not handle {}", channelId, message);

bundles/org.openhab.binding.rfxcom/src/main/java/org/openhab/binding/rfxcom/internal/messages/RFXComLighting2Message.java

@@ -152,7 +152,7 @@ public String getDeviceId() {
  * Convert a 0-15 scale value to a percent type.
  *
  * @param pt
- * percent type to convert
+ *  percent type to convert
  * @return converted value 0-15
  */
  public static int getDimLevelFromPercentType(PercentType pt) {
@@ -164,7 +164,7 @@ public static int getDimLevelFromPercentType(PercentType pt) {
  * Convert a 0-15 scale value to a percent type.
  *
  * @param value
- * percent type to convert
+ *  percent type to convert
  * @return converted value 0-15
  */
  public static PercentType getPercentTypeFromDimLevel(int value) {

bundles/org.openhab.binding.rfxcom/src/main/java/org/openhab/binding/rfxcom/internal/messages/RFXComLighting5Message.java

@@ -73,10 +73,10 @@ public byte toByte() {
  /**
  * Note: for the lighting5 commands, some command are only supported for certain sub types and
  * command-bytes might even have a different meaning for another sub type.
- * <p>
+ *
  * If no sub types are specified for a command, its supported by all sub types.
  * An example is the command OFF which is represented by the byte 0x00 for all subtypes.
- * <p>
+ *
  * Otherwise the list of sub types after the command-bytes indicates the sub types
  * which support this command with this byte.
  * Example byte value 0x03 means GROUP_ON for IT and some others while it means MOOD1 for LIGHTWAVERF
@@ -206,7 +206,7 @@ public String getDeviceId() {
  * Convert a 0-31 scale value to a percent type.
  *
  * @param pt
- * percent type to convert
+ *  percent type to convert
  * @return converted value 0-31
  */
  public static int getDimLevelFromPercentType(PercentType pt) {
@@ -218,7 +218,7 @@ public static int getDimLevelFromPercentType(PercentType pt) {
  * Convert a 0-31 scale value to a percent type.
  *
  * @param value
- * percent type to convert
+ *  percent type to convert
  * @return converted value 0-31
  */
  public static PercentType getPercentTypeFromDimLevel(int value) {

bundles/org.openhab.binding.rfxcom/src/main/java/org/openhab/binding/rfxcom/internal/messages/RFXComMessage.java

@@ -28,7 +28,7 @@ public interface RFXComMessage {
  * Procedure for encode raw data.
  *
  * @param data
- * Raw data.
+ *  Raw data.
  */
  void encodeMessage(byte[] data) throws RFXComException;
 

bundles/org.openhab.binding.rfxcom/src/main/java/org/openhab/binding/rfxcom/internal/messages/RFXComThermostat3Message.java

@@ -12,18 +12,21 @@
  */
 package org.openhab.binding.rfxcom.internal.messages;
 
-import static org.openhab.binding.rfxcom.internal.RFXComBindingConstants.CHANNEL_COMMAND;
+import static org.openhab.binding.rfxcom.internal.RFXComBindingConstants.*;
 import static org.openhab.binding.rfxcom.internal.messages.ByteEnumUtil.fromByte;
 import static org.openhab.binding.rfxcom.internal.messages.RFXComThermostat3Message.SubType.*;
 
 import java.util.Arrays;
 import java.util.List;
 
 import org.eclipse.smarthome.core.library.types.OnOffType;
-import org.eclipse.smarthome.core.library.types.OpenClosedType;
+import org.eclipse.smarthome.core.library.types.PercentType;
+import org.eclipse.smarthome.core.library.types.StopMoveType;
+import org.eclipse.smarthome.core.library.types.StringType;
 import org.eclipse.smarthome.core.library.types.UpDownType;
 import org.eclipse.smarthome.core.types.State;
 import org.eclipse.smarthome.core.types.Type;
+import org.eclipse.smarthome.core.types.UnDefType;
 import org.openhab.binding.rfxcom.internal.exceptions.RFXComException;
 import org.openhab.binding.rfxcom.internal.exceptions.RFXComUnsupportedChannelException;
 import org.openhab.binding.rfxcom.internal.exceptions.RFXComUnsupportedValueException;
@@ -98,7 +101,6 @@ public static Commands fromByte(int input, SubType subType) throws RFXComUnsuppo
  public SubType subType;
  private int unitId;
  public Commands command;
- private byte commandId;
 
  public RFXComThermostat3Message() {
  super(PacketType.THERMOSTAT3);
@@ -115,7 +117,7 @@ public String toString() {
  str += super.toString();
  str += ", Sub type = " + subType;
  str += ", Device Id = " + getDeviceId();
- str += ", Command = " + command + "(" + commandId + ")";
+ str += ", Command = " + command;
  str += ", Signal level = " + signalLevel;
 
  return str;
@@ -132,8 +134,7 @@ public void encodeMessage(byte[] data) throws RFXComException {
 
  subType = fromByte(SubType.class, super.subType);
  unitId = (data[4] & 0xFF) << 16 | (data[5] & 0xFF) << 8 | (data[6] & 0xFF);
- commandId = data[7];
- command = Commands.fromByte(commandId, subType);
+ command = Commands.fromByte(data[7], subType);
  signalLevel = (byte) ((data[8] & 0xF0) >> 4);
  }
 
@@ -159,19 +160,51 @@ public State convertToState(String channelId) throws RFXComUnsupportedChannelExc
  switch (channelId) {
  case CHANNEL_COMMAND:
  switch (command) {
+ case RUN_DOWN:
  case OFF:
- case SECOND_OFF:
  return OnOffType.OFF;
  case ON:
+ case RUN_UP:
+ case UP:
+ return OnOffType.ON;
  case SECOND_ON:
+ case SECOND_OFF:
+ return null;
+ default:
+ return UnDefType.UNDEF;
+
+ }
+ case CHANNEL_CONTROL:
+ switch (command) {
+ case ON:
  return OnOffType.ON;
  case UP:
+ case RUN_UP:
  return UpDownType.UP;
+ case OFF:
+ return OnOffType.OFF;
  case DOWN:
+ case RUN_DOWN:
  return UpDownType.DOWN;
+ case SECOND_ON:
+ case SECOND_OFF:
+ case STOP:
+ return null;
  default:
  throw new RFXComUnsupportedChannelException("Can't convert " + command + " for " + channelId);
  }
+ case CHANNEL_COMMAND_SECOND:
+ switch (command) {
+ case SECOND_OFF:
+ return OnOffType.OFF;
+ case SECOND_ON:
+ return OnOffType.ON;
+ default:
+ return null;
+ }
+ case CHANNEL_COMMAND_STRING:
+ return command == null ? UnDefType.UNDEF : StringType.valueOf(command.toString());
+
  default:
  return super.convertToState(channelId);
  }
@@ -183,15 +216,35 @@ public void convertFromState(String channelId, Type type) throws RFXComUnsupport
  case CHANNEL_COMMAND:
  if (type instanceof OnOffType) {
  command = (type == OnOffType.ON ? Commands.ON : Commands.OFF);
- } else if (type instanceof UpDownType) {
+ } else {
+ throw new RFXComUnsupportedChannelException("Channel " + channelId + " does not accept " + type);
+ }
+ break;
+
+ case CHANNEL_COMMAND_SECOND:
+ if (type instanceof OnOffType) {
+ command = (type == OnOffType.ON ? Commands.SECOND_ON : Commands.SECOND_OFF);
+ } else {
+ throw new RFXComUnsupportedChannelException("Channel " + channelId + " does not accept " + type);
+ }
+ break;
+
+ case CHANNEL_CONTROL:
+ if (type instanceof UpDownType) {
  command = (type == UpDownType.UP ? Commands.UP : Commands.DOWN);
- } else if (type instanceof OpenClosedType) {
- command = (type == OpenClosedType.CLOSED ? Commands.ON : Commands.OFF);
+ } else if (type == StopMoveType.STOP) {
+ command = Commands.STOP;
+ } else if (type instanceof PercentType) {
+ command = ((PercentType) type).as(UpDownType.class) == UpDownType.UP ? Commands.UP : Commands.DOWN;
  } else {
  throw new RFXComUnsupportedChannelException("Channel " + channelId + " does not accept " + type);
  }
  break;
 
+ case CHANNEL_COMMAND_STRING:
+ command = Commands.valueOf(type.toString().toUpperCase());
+ break;
+
  default:
  throw new RFXComUnsupportedChannelException("Channel " + channelId + " is not relevant here");
  }

bundles/org.openhab.binding.rfxcom/src/main/resources/ESH-INF/thing/channels.xml

@@ -26,10 +26,16 @@
  <channel-type id="commandId">
  <item-type>Number</item-type>
  <label>Command ID</label>
- <description>Command channel, ID of the channel</description>
+ <description>Command channel, ID of the command</description>
  <state min="0" max="255" step="1" pattern="%d" readOnly="false"></state>
  </channel-type>
 
+ <channel-type id="commandString">
+ <item-type>String</item-type>
+ <label>Command String</label>
+ <description>Command channel, Name of the command</description>
+ </channel-type>
+
  <channel-type id="contact">
  <item-type>Contact</item-type>
  <label>Contact</label>
@@ -70,6 +76,12 @@
  <state min="0" max="255" step="1" pattern="%d °C" readOnly="false"></state>
  </channel-type>
 
+ <channel-type id="tempcontrol">
+ <item-type>Rollershutter</item-type>
+ <label>Global Temperature Control</label>
+ <description>Requested temperature setting, UP, DOWN, STOP</description>
+ </channel-type>
+
  <channel-type id="motion">
  <item-type>Switch</item-type>
  <label>Motion</label>