request: Add Jumperless to PID list

[Architeuthis-Flux]

Jumperless - a jumperless breadboard

Licenses:
Hardware - CERN-OHL-W-2.0
Software - MIT
Documentation - CC-BY-4.0

OSHWA ID: US002417

https://github.com/Architeuthis-Flux/Jumperless

I might need one more PID as the Jumperless shows up as 2 USB endpoints (the other acts as a routable USB-UART bridge), and it might happen that we'll need that to show up as a completely separate device in the future.

I hope it's okay to pick an arbitrary PID to match the current made-up PID I've been using. If not, it's fine and I can make it sequential.

Anyway, thanks for doing this!

[cuvoodoo]

arbitrary PID is not usual, but possible.
here my checklist to get a USB PID allocated (most are passed, but some need a bit of attention or explanation).

hardware (JumperLess Rev3):

• license: PASSED (CERN text present in LICENSE file)
• export: PASSED (schematic pdf in Hardware/SchematicRev3point1WithLicense.pdf.zip, layout gerber in Hardware/ProductionFiles/BoardProductionFiles.zip)
• copyright: NEEDS ATTENTION (license present, date and author/contact missing in schematic)
• schematic sources: NEEDS ATTENTION (only Rev3 source present, but export is for Rev3point1; license, date, title, and author/contact missing on sheet)
• layout sources: NEEDS ATTENTION ('Eurostile Next LT Com' font missing and not provided in repo; license, date, title, and author/contact missing on sheet)

software (JumperlessNano):

• license: PASSED (MIT text present in LICENSE file)
• sources: NEEDS ATTENTION (SPDX license present, date and author/contact missing in file header)

[cuvoodoo]

I see activity on the Jumperless repo.
Most points that need attention have not been addressed yet though.
Do you still require the PIDs and plan to work on them?

[Architeuthis-Flux]

Hey @cuvoodoo,

I made the fixes you mentioned, let me know if the most recent changes bring this repo up to spec, or if I missed anything.

Thanks!

[cuvoodoo]

hardware (JumperLess Rev3point1):

• license: PASSED
• export: PASSED
• schematic: NEEDS ATTENTION (license/date/author/contact in export, but license missing in source)
• layout sources: NEEDS ATTENTION ('Eurostile Next LT Com' font missing and not provided in repo)

software (JumperlessNano):

• license: PASSED (MIT text present in LICENSE file)
• sources: NEEDS ATTENTION (SPDX license present, date and author/contact missing in file header)

[cuvoodoo]

closing this PR due to inactivity. Feel free to open a new one once the issues have been addressed.