Prevent unnecessary resilver restarts

If a device is participating in an active resilver, then it will have a
non-empty DTL. Operations like vdev_{open,reopen,probe}() can cause the
resilver to be restarted (or deferred to be restarted later), which is
unnecessary if the DTL is still covered by the current scan range. This
is similar to the logic in vdev_dtl_should_excise() where the DTL can
only be excised if it's max txg is in the resilvered range.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Gallagher <john.gallagher@delphix.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: John Poduska <jpoduska@datto.com>
Issue #840
Closes #9155
Closes #9378
Closes #9551
Closes #9588

configure.ac

@@ -323,6 +323,7 @@ AC_CONFIG_FILES([
 	tests/zfs-tests/tests/functional/rename_dirs/Makefile
 	tests/zfs-tests/tests/functional/replacement/Makefile
 	tests/zfs-tests/tests/functional/reservation/Makefile
+	tests/zfs-tests/tests/functional/resilver/Makefile
 	tests/zfs-tests/tests/functional/rootpool/Makefile
 	tests/zfs-tests/tests/functional/rsend/Makefile
 	tests/zfs-tests/tests/functional/scrub_mirror/Makefile

include/sys/dsl_scan.h

@@ -21,7 +21,7 @@
 /*
  * Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.
  * Copyright (c) 2012, 2017 by Delphix. All rights reserved.
- * Copyright (c) 2017 Datto Inc.
+ * Copyright (c) 2017, 2019, Datto Inc. All rights reserved.
  */
 
 #ifndef	_SYS_DSL_SCAN_H
@@ -164,10 +164,12 @@ void dsl_scan_fini(struct dsl_pool *dp);
 void dsl_scan_sync(struct dsl_pool *, dmu_tx_t *);
 int dsl_scan_cancel(struct dsl_pool *);
 int dsl_scan(struct dsl_pool *, pool_scan_func_t);
+void dsl_scan_assess_vdev(struct dsl_pool *dp, vdev_t *vd);
 boolean_t dsl_scan_scrubbing(const struct dsl_pool *dp);
 int dsl_scrub_set_pause_resume(const struct dsl_pool *dp, pool_scrub_cmd_t cmd);
-void dsl_resilver_restart(struct dsl_pool *, uint64_t txg);
+void dsl_scan_restart_resilver(struct dsl_pool *, uint64_t txg);
 boolean_t dsl_scan_resilvering(struct dsl_pool *dp);
+boolean_t dsl_scan_resilver_scheduled(struct dsl_pool *dp);
 boolean_t dsl_dataset_unstable(struct dsl_dataset *ds);
 void dsl_scan_ddt_entry(dsl_scan_t *scn, enum zio_checksum checksum,
     ddt_entry_t *dde, dmu_tx_t *tx);

include/sys/spa.h

@@ -26,7 +26,7 @@
  * Copyright 2013 Saso Kiselkov. All rights reserved.
  * Copyright (c) 2014 Integros [integros.com]
  * Copyright 2017 Joyent, Inc.
- * Copyright (c) 2017 Datto Inc.
+ * Copyright (c) 2017, 2019, Datto Inc. All rights reserved.
  * Copyright (c) 2017, Intel Corporation.
  */
 
@@ -777,6 +777,7 @@ extern void spa_async_request(spa_t *spa, int flag);
 extern void spa_async_unrequest(spa_t *spa, int flag);
 extern void spa_async_suspend(spa_t *spa);
 extern void spa_async_resume(spa_t *spa);
+extern int spa_async_tasks(spa_t *spa);
 extern spa_t *spa_inject_addref(char *pool);
 extern void spa_inject_delref(spa_t *spa);
 extern void spa_scan_stat_init(spa_t *spa);

include/sys/vdev.h

@@ -23,6 +23,7 @@
  * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
  * Copyright (c) 2011, 2017 by Delphix. All rights reserved.
  * Copyright (c) 2017, Intel Corporation.
+ * Copyright (c) 2019, Datto Inc. All rights reserved.
  */
 
 #ifndef _SYS_VDEV_H
@@ -151,7 +152,8 @@ extern int vdev_config_sync(vdev_t **svd, int svdcount, uint64_t txg);
 extern void vdev_state_dirty(vdev_t *vd);
 extern void vdev_state_clean(vdev_t *vd);
 
-extern void vdev_set_deferred_resilver(spa_t *spa, vdev_t *vd);
+extern void vdev_defer_resilver(vdev_t *vd);
+extern boolean_t vdev_clear_resilver_deferred(vdev_t *vd, dmu_tx_t *tx);
 
 typedef enum vdev_config_flag {
 	VDEV_CONFIG_SPARE = 1 << 0,

module/zfs/dsl_scan.c

@@ -22,7 +22,7 @@
  * Copyright (c) 2008, 2010, Oracle and/or its affiliates. All rights reserved.
  * Copyright (c) 2011, 2017 by Delphix. All rights reserved.
  * Copyright 2016 Gary Mills
- * Copyright (c) 2017 Datto Inc.
+ * Copyright (c) 2017, 2019, Datto Inc. All rights reserved.
  * Copyright 2019 Joyent, Inc.
  */
 
@@ -591,6 +591,13 @@ dsl_scan_restarting(dsl_scan_t *scn, dmu_tx_t *tx)
 	    scn->scn_restart_txg <= tx->tx_txg);
 }
 
+boolean_t
+dsl_scan_resilver_scheduled(dsl_pool_t *dp)
+{
+	return ((dp->dp_scan && dp->dp_scan->scn_restart_txg != 0) ||
+	    (spa_async_tasks(dp->dp_spa) & SPA_ASYNC_RESILVER));
+}
+
 boolean_t
 dsl_scan_scrubbing(const dsl_pool_t *dp)
 {
@@ -786,7 +793,7 @@ dsl_scan(dsl_pool_t *dp, pool_scan_func_t func)
 	(void) spa_vdev_state_exit(spa, NULL, 0);
 
 	if (func == POOL_SCAN_RESILVER) {
-		dsl_resilver_restart(spa->spa_dsl_pool, 0);
+		dsl_scan_restart_resilver(spa->spa_dsl_pool, 0);
 		return (0);
 	}
 
@@ -806,41 +813,6 @@ dsl_scan(dsl_pool_t *dp, pool_scan_func_t func)
 	    dsl_scan_setup_sync, &func, 0, ZFS_SPACE_CHECK_EXTRA_RESERVED));
 }
 
-/*
- * Sets the resilver defer flag to B_FALSE on all leaf devs under vd. Returns
- * B_TRUE if we have devices that need to be resilvered and are available to
- * accept resilver I/Os.
- */
-static boolean_t
-dsl_scan_clear_deferred(vdev_t *vd, dmu_tx_t *tx)
-{
-	boolean_t resilver_needed = B_FALSE;
-	spa_t *spa = vd->vdev_spa;
-
-	for (int c = 0; c < vd->vdev_children; c++) {
-		resilver_needed |=
-		    dsl_scan_clear_deferred(vd->vdev_child[c], tx);
-	}
-
-	if (vd == spa->spa_root_vdev &&
-	    spa_feature_is_active(spa, SPA_FEATURE_RESILVER_DEFER)) {
-		spa_feature_decr(spa, SPA_FEATURE_RESILVER_DEFER, tx);
-		vdev_config_dirty(vd);
-		spa->spa_resilver_deferred = B_FALSE;
-		return (resilver_needed);
-	}
-
-	if (!vdev_is_concrete(vd) || vd->vdev_aux ||
-	    !vd->vdev_ops->vdev_op_leaf)
-		return (resilver_needed);
-
-	if (vd->vdev_resilver_deferred)
-		vd->vdev_resilver_deferred = B_FALSE;
-
-	return (!vdev_is_dead(vd) && !vd->vdev_offline &&
-	    vdev_resilver_needed(vd, NULL, NULL));
-}
-
 /* ARGSUSED */
 static void
 dsl_scan_done(dsl_scan_t *scn, boolean_t complete, dmu_tx_t *tx)
@@ -943,25 +915,21 @@ dsl_scan_done(dsl_scan_t *scn, boolean_t complete, dmu_tx_t *tx)
 		spa_async_request(spa, SPA_ASYNC_RESILVER_DONE);
 
 		/*
-		 * Clear any deferred_resilver flags in the config.
+		 * Clear any resilver_deferred flags in the config.
 		 * If there are drives that need resilvering, kick
 		 * off an asynchronous request to start resilver.
-		 * dsl_scan_clear_deferred() may update the config
+		 * vdev_clear_resilver_deferred() may update the config
 		 * before the resilver can restart. In the event of
 		 * a crash during this period, the spa loading code
 		 * will find the drives that need to be resilvered
-		 * when the machine reboots and start the resilver then.
+		 * and start the resilver then.
 		 */
-		if (spa_feature_is_enabled(spa, SPA_FEATURE_RESILVER_DEFER)) {
-			boolean_t resilver_needed =
-			    dsl_scan_clear_deferred(spa->spa_root_vdev, tx);
-			if (resilver_needed) {
-				spa_history_log_internal(spa,
-				    "starting deferred resilver", tx,
-				    "errors=%llu",
-				    (u_longlong_t)spa_get_errlog_size(spa));
-				spa_async_request(spa, SPA_ASYNC_RESILVER);
-			}
+		if (spa_feature_is_enabled(spa, SPA_FEATURE_RESILVER_DEFER) &&
+		    vdev_clear_resilver_deferred(spa->spa_root_vdev, tx)) {
+			spa_history_log_internal(spa,
+			    "starting deferred resilver", tx, "errors=%llu",
+			    (u_longlong_t)spa_get_errlog_size(spa));
+			spa_async_request(spa, SPA_ASYNC_RESILVER);
 		}
 	}
 
@@ -1071,7 +1039,7 @@ dsl_scrub_set_pause_resume(const dsl_pool_t *dp, pool_scrub_cmd_t cmd)
 
 /* start a new scan, or restart an existing one. */
 void
-dsl_resilver_restart(dsl_pool_t *dp, uint64_t txg)
+dsl_scan_restart_resilver(dsl_pool_t *dp, uint64_t txg)
 {
 	if (txg == 0) {
 		dmu_tx_t *tx;
@@ -4232,6 +4200,36 @@ dsl_scan_freed(spa_t *spa, const blkptr_t *bp)
 		dsl_scan_freed_dva(spa, bp, i);
 }
 
+/*
+ * Check if a vdev needs resilvering (non-empty DTL), if so, and resilver has
+ * not started, start it. Otherwise, only restart if max txg in DTL range is
+ * greater than the max txg in the current scan. If the DTL max is less than
+ * the scan max, then the vdev has not missed any new data since the resilver
+ * started, so a restart is not needed.
+ */
+void
+dsl_scan_assess_vdev(dsl_pool_t *dp, vdev_t *vd)
+{
+	uint64_t min, max;
+
+	if (!vdev_resilver_needed(vd, &min, &max))
+		return;
+
+	if (!dsl_scan_resilvering(dp)) {
+		spa_async_request(dp->dp_spa, SPA_ASYNC_RESILVER);
+		return;
+	}
+
+	if (max <= dp->dp_scan->scn_phys.scn_max_txg)
+		return;
+
+	/* restart is needed, check if it can be deferred */
+	if (spa_feature_is_enabled(dp->dp_spa, SPA_FEATURE_RESILVER_DEFER))
+		vdev_defer_resilver(vd);
+	else
+		spa_async_request(dp->dp_spa, SPA_ASYNC_RESILVER);
+}
+
 #if defined(_KERNEL)
 /* CSTYLED */
 module_param(zfs_scan_vdev_limit, ulong, 0644);

module/zfs/spa.c

@@ -29,7 +29,7 @@
  * Copyright 2016 Toomas Soome <tsoome@me.com>
  * Copyright (c) 2016 Actifio, Inc. All rights reserved.
  * Copyright 2018 Joyent, Inc.
- * Copyright (c) 2017 Datto Inc.
+ * Copyright (c) 2017, 2019, Datto Inc. All rights reserved.
  * Copyright 2017 Joyent, Inc.
  * Copyright (c) 2017, Intel Corporation.
  */
@@ -6242,9 +6242,9 @@ spa_vdev_attach(spa_t *spa, uint64_t guid, nvlist_t *nvroot, int replacing)
 	 */
 	if (dsl_scan_resilvering(spa_get_dsl(spa)) &&
 	    spa_feature_is_enabled(spa, SPA_FEATURE_RESILVER_DEFER))
-		vdev_set_deferred_resilver(spa, newvd);
+		vdev_defer_resilver(newvd);
 	else
-		dsl_resilver_restart(spa->spa_dsl_pool, dtl_max_txg);
+		dsl_scan_restart_resilver(spa->spa_dsl_pool, dtl_max_txg);
 
 	if (spa->spa_bootfs)
 		spa_event_notify(spa, newvd, NULL, ESC_ZFS_BOOTFS_VDEV_ATTACH);
@@ -7479,7 +7479,7 @@ spa_async_thread(void *arg)
 	if (tasks & SPA_ASYNC_RESILVER &&
 	    (!dsl_scan_resilvering(dp) ||
 	    !spa_feature_is_enabled(dp->dp_spa, SPA_FEATURE_RESILVER_DEFER)))
-		dsl_resilver_restart(dp, 0);
+		dsl_scan_restart_resilver(dp, 0);
 
 	if (tasks & SPA_ASYNC_INITIALIZE_RESTART) {
 		mutex_enter(&spa_namespace_lock);
@@ -7595,6 +7595,12 @@ spa_async_request(spa_t *spa, int task)
 	mutex_exit(&spa->spa_async_lock);
 }
 
+int
+spa_async_tasks(spa_t *spa)
+{
+	return (spa->spa_async_tasks);
+}
+
 /*
  * ==========================================================================
  * SPA syncing routines

module/zfs/vdev.c

@@ -27,6 +27,7 @@
  * Copyright 2016 Toomas Soome <tsoome@me.com>
  * Copyright 2017 Joyent, Inc.
  * Copyright (c) 2017, Intel Corporation.
+ * Copyright (c) 2019, Datto Inc. All rights reserved.
  */
 
 #include <sys/zfs_context.h>
@@ -833,7 +834,7 @@ vdev_alloc(spa_t *spa, vdev_t **vdp, nvlist_t *nv, vdev_t *parent, uint_t id,
 		    &vd->vdev_resilver_txg);
 
 		if (nvlist_exists(nv, ZPOOL_CONFIG_RESILVER_DEFER))
-			vdev_set_deferred_resilver(spa, vd);
+			vdev_defer_resilver(vd);
 
 		/*
 		 * In general, when importing a pool we want to ignore the
@@ -1863,18 +1864,12 @@ vdev_open(vdev_t *vd)
 	}
 
 	/*
-	 * If a leaf vdev has a DTL, and seems healthy, then kick off a
-	 * resilver.  But don't do this if we are doing a reopen for a scrub,
-	 * since this would just restart the scrub we are already doing.
+	 * If this is a leaf vdev, assess whether a resilver is needed.
+	 * But don't do this if we are doing a reopen for a scrub, since
+	 * this would just restart the scrub we are already doing.
 	 */
-	if (vd->vdev_ops->vdev_op_leaf && !spa->spa_scrub_reopen &&
-	    vdev_resilver_needed(vd, NULL, NULL)) {
-		if (dsl_scan_resilvering(spa->spa_dsl_pool) &&
-		    spa_feature_is_enabled(spa, SPA_FEATURE_RESILVER_DEFER))
-			vdev_set_deferred_resilver(spa, vd);
-		else
-			spa_async_request(spa, SPA_ASYNC_RESILVER);
-	}
+	if (vd->vdev_ops->vdev_op_leaf && !spa->spa_scrub_reopen)
+		dsl_scan_assess_vdev(spa->spa_dsl_pool, vd);
 
 	return (0);
 }
@@ -3693,14 +3688,11 @@ vdev_clear(spa_t *spa, vdev_t *vd)
 		if (vd != rvd && vdev_writeable(vd->vdev_top))
 			vdev_state_dirty(vd->vdev_top);
 
-		if (vd->vdev_aux == NULL && !vdev_is_dead(vd)) {
-			if (dsl_scan_resilvering(spa->spa_dsl_pool) &&
-			    spa_feature_is_enabled(spa,
-			    SPA_FEATURE_RESILVER_DEFER))
-				vdev_set_deferred_resilver(spa, vd);
-			else
-				spa_async_request(spa, SPA_ASYNC_RESILVER);
-		}
+		/* If a resilver isn't required, check if vdevs can be culled */
+		if (vd->vdev_aux == NULL && !vdev_is_dead(vd) &&
+		    !dsl_scan_resilvering(spa->spa_dsl_pool) &&
+		    !dsl_scan_resilver_scheduled(spa->spa_dsl_pool))
+			spa_async_request(spa, SPA_ASYNC_RESILVER_DONE);
 
 		spa_event_notify(spa, vd, NULL, ESC_ZFS_VDEV_CLEAR);
 	}
@@ -4693,18 +4685,46 @@ vdev_deadman(vdev_t *vd, char *tag)
 }
 
 void
-vdev_set_deferred_resilver(spa_t *spa, vdev_t *vd)
+vdev_defer_resilver(vdev_t *vd)
 {
-	for (uint64_t i = 0; i < vd->vdev_children; i++)
-		vdev_set_deferred_resilver(spa, vd->vdev_child[i]);
+	ASSERT(vd->vdev_ops->vdev_op_leaf);
 
-	if (!vd->vdev_ops->vdev_op_leaf || !vdev_writeable(vd) ||
-	    range_tree_is_empty(vd->vdev_dtl[DTL_MISSING])) {
-		return;
+	vd->vdev_resilver_deferred = B_TRUE;
+	vd->vdev_spa->spa_resilver_deferred = B_TRUE;
+}
+
+/*
+ * Clears the resilver deferred flag on all leaf devs under vd. Returns
+ * B_TRUE if we have devices that need to be resilvered and are available to
+ * accept resilver I/Os.
+ */
+boolean_t
+vdev_clear_resilver_deferred(vdev_t *vd, dmu_tx_t *tx)
+{
+	boolean_t resilver_needed = B_FALSE;
+	spa_t *spa = vd->vdev_spa;
+
+	for (int c = 0; c < vd->vdev_children; c++) {
+		vdev_t *cvd = vd->vdev_child[c];
+		resilver_needed |= vdev_clear_resilver_deferred(cvd, tx);
 	}
 
-	vd->vdev_resilver_deferred = B_TRUE;
-	spa->spa_resilver_deferred = B_TRUE;
+	if (vd == spa->spa_root_vdev &&
+	    spa_feature_is_active(spa, SPA_FEATURE_RESILVER_DEFER)) {
+		spa_feature_decr(spa, SPA_FEATURE_RESILVER_DEFER, tx);
+		vdev_config_dirty(vd);
+		spa->spa_resilver_deferred = B_FALSE;
+		return (resilver_needed);
+	}
+
+	if (!vdev_is_concrete(vd) || vd->vdev_aux ||
+	    !vd->vdev_ops->vdev_op_leaf)
+		return (resilver_needed);
+
+	vd->vdev_resilver_deferred = B_FALSE;
+
+	return (!vdev_is_dead(vd) && !vd->vdev_offline &&
+	    vdev_resilver_needed(vd, NULL, NULL));
 }
 
 /*

tests/runfiles/linux.run

@@ -796,6 +796,10 @@ tests = ['reservation_001_pos', 'reservation_002_pos', 'reservation_003_pos',
     'reservation_022_pos']
 tags = ['functional', 'reservation']
 
+[tests/functional/resilver]
+tests = ['resilver_restart_001']
+tags = ['functional', 'resilver']
+
 [tests/functional/rootpool]
 tests = ['rootpool_002_neg', 'rootpool_003_neg', 'rootpool_007_pos']
 tags = ['functional', 'rootpool']

tests/zfs-tests/tests/functional/Makefile.am

@@ -59,6 +59,7 @@ SUBDIRS = \
 	rename_dirs \
 	replacement \
 	reservation \
+	resilver \
 	rootpool \
 	rsend \
 	scrub_mirror \