Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

configure fails with --enable-linux-builtin when CONFIG_MODULES=n #10832

Closed
nihil-2019 opened this issue Aug 27, 2020 · 8 comments · Fixed by #13361
Closed

configure fails with --enable-linux-builtin when CONFIG_MODULES=n #10832

nihil-2019 opened this issue Aug 27, 2020 · 8 comments · Fixed by #13361
Labels
Status: Understood The root cause of the issue is known Type: Building Indicates an issue related to building binaries

Comments

@nihil-2019
Copy link

nihil-2019 commented Aug 27, 2020

System information

Type Version/Name
Distribution Name Arch
Distribution Version rolling (up to date as of the submission of this bug report)
Linux Kernel 5.8.4
Architecture x86-64
ZFS Version 2.0.0-rc1
SPL Version 2.0.0-rc1

Describe the problem you're observing

After copying my .config & running make prepare under a copy of the Linux source, then running autogen.sh & configure with --enable-linux-builtin in a clean zfs source tree, I get the error

configure: error: 
        *** Unable to build an empty module.
        *** Please run 'make scripts' inside the kernel source tree.

I also tried to run make oldconfig & make scripts in the kernel directory before re-cloning the zfs tree & retrying the above steps, though I do realize that make prepare builds those targets automatically - still the same result. Note that I was able to successfully build zfs into the kernel with 5.6/0.8.x just a few months ago, & each time configure ran normally.

Describe how to reproduce the problem

Run make prepare in a configured Linux source tree (in this case under /tmp/linux/), then run sh autogen.sh & sh configure --with-config=kernel --with-linux=/tmp/linux/ --with-linux-obj=/tmp/linux/ --enable-linux-builtin. configure will fail.

Include any warning/errors/backtraces from the system logs

config.log (before patch):

configure:13570: checking kernel file name for module symbols     
configure:13600: result: NONE                                                  
configure:13701: checking whether modules can be built             
configure:13762:                     
            KBUILD_MODPOST_NOFINAL= KBUILD_MODPOST_WARN=     
            make modules -k -j16 -C /tmp/linux/                         
            M=/tmp/zfs/build/conftest >build/conftest/build.log 2>&1     
configure:13765: $? = 2                                                   
configure:13768: test -f build/conftest/conftest.o                  
configure:13771: $? = 1     
configure:13779: result: no     
configure:13786: error:      
        *** Unable to build an empty module.     
        *** Please run 'make scripts' inside the kernel source tree.

build/conftest/build.log:

make: Entering directory '/tmp/linux'    
make[1]: *** No rule to make target '/tmp/zfs/build/conftest/modules.order', needed by '/tmp/zfs/build/conftest/Module.symvers'.    
WARNING: Symbol version dump "Module.symvers" is missing.    
         Modules may not have dependencies or modversions.    
make[1]: Target '__modpost' not remade because of errors.    
make: *** [Makefile:1672: modules] Error 2    
make: Leaving directory '/tmp/linux'
@nihil-2019 nihil-2019 added Status: Triage Needed New issue which needs to be triaged Type: Defect Incorrect behavior (e.g. crash, hang) labels Aug 27, 2020
@behlendorf
Copy link
Contributor

@nihil-2019 the issue might related to specifying --with-config=kernel. The procedure we use to test the built in functionality is described in this #10450 (comment) . Can you give it another try following those steps.

@behlendorf behlendorf added Type: Building Indicates an issue related to building binaries and removed Status: Triage Needed New issue which needs to be triaged labels Aug 27, 2020
@nihil-2019
Copy link
Author

The issue seems to be zfs tripping up on CONFIG_MODULES=n again... Both my config & the x86-64 defconfig pass configure with that option set to y, & fail with it on n, regardless of whether --with-config=kernel is specified or not. The false detection of CONFIG_DEBUG_LOCK_ALLOC seems to not be an actual issue but rather the result of that test depending on ZFS_AC_KERNEL_TEST_MODULE, as it only happens when patching that out, so I'll go ahead & remove that from the initial post.

@nihil-2019 nihil-2019 changed the title configure issues with zfs 2.0.0-rc1 & Linux 5.8.4 configure fails with --enable-linux-builtin when CONFIG_MODULES=n Aug 28, 2020
@RoelofSol
Copy link

RoelofSol commented Sep 10, 2020

One solution to get test modules building again is to add MODORDER and an output file to config/kernel.m4:LINUX_COMPILE

AC_DEFUN([ZFS_LINUX_COMPILE], [
	AC_TRY_COMMAND([
	    KBUILD_MODPOST_NOFINAL="$5" KBUILD_MODPOST_WARN="$6"
	    make modules -k -j$TEST_JOBS -C $LINUX_OBJ $ARCH_UM
	    M=$PWD/$1 MODORDER=/dev/null $(basename $1).o >$1/build.log 2>&1])
	AS_IF([AC_TRY_COMMAND([$2])], [$3], [$4])
])

@arvidbrodin
Copy link

arvidbrodin commented Sep 8, 2021

I can confirm this error with ZFS version 2.0.5 and kernel-5.10.62.

config.log:

configure:17538: checking kernel source directory
configure:17581: result: /usr/src/linux
configure:17592: checking kernel build directory
configure:17619: result: /usr/src/linux
configure:17622: checking kernel source version
configure:17670: result: 5.10.62-zfs
configure:17702: checking kernel file name for module symbols
configure:17732: result: NONE
configure:17833: checking whether modules can be built
configure:17901:
            KBUILD_MODPOST_NOFINAL= KBUILD_MODPOST_WARN=
            make modules -k -j4 -C /usr/src/linux
            M=/var/tmp/portage/sys-fs/zfs-kmod-2.0.5/work/zfs-2.0.5/build/conftest >build/conftest/buil
d.log 2>&1
configure:17904: $? = 2
configure:17907: test -f build/conftest/conftest.o
configure:17910: $? = 1
configure:17918: result: no
configure:17925: error:
        *** Unable to build an empty module.
        *** Please run 'make scripts' inside the kernel source tree.

build/conftest/build.log:

make: Entering directory '/usr/src/linux-5.10.62'
make[1]: *** No rule to make target '/var/tmp/portage/sys-fs/zfs-kmod-2.0.5/work/zfs-2.0.5/build/conftest/modules.order', needed by '/var/tmp/portage/sys-fs/zfs-kmod-2.0.5/work/zfs-2.0.5/build/conftest/Module.symvers'.
WARNING: Symbol version dump "Module.symvers" is missing.
         Modules may not have dependencies or modversions.
make[1]: Target '__modpost' not remade because of errors.
make: *** [Makefile:1726: modules] Error 2
make: Leaving directory '/usr/src/linux-5.10.62'

After modifying "conftest" not to fail, I get additional failures of configuration tests:
Edit: Removed this part since these failures where due to me trying to configure zfs-kmod using a newer gcc than what had been used to build the kernel, without running 'make clean' and 'make prepare' in the kernel tree in between.

I see there was talk in previous similar bug reports of adding CONFIG_MODULES=n to the integration testing. Is there some progress on that?

Edit: the zfs-kmod configure command line used:
./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-dependency-tracking --disable-silent-rules --docdir=/usr/share/doc/zfs-kmod-2.0.5 --htmldir=/usr/share/doc/zfs-kmod-2.0.5/html --with-sysroot=/ --libdir=/usr/lib64 CROSS_COMPILE=x86_64-pc-linux-gnu- HOSTCC=x86_64-pc-linux-gnu-gcc --bindir=/bin --sbindir=/sbin --with-config=kernel --with-linux=/usr/src/linux --with-linux-obj=/usr/src/linux --disable-debug --enable-linux-builtin

It would be great to get my ZFS pools up and running again after the upgrade! Any advice, except enabling modules?

@arvidbrodin
Copy link

I managed to work around this issue by temporarily setting CONFIG_MODULES=y, running 'make prepare' in the kernel tree, then configuring zfs-kmod and running './copy-builtin /usr/src/linux' in the zfs-kmod source folder, then setting CONFIG_MODULES=n again (and CONFIG_ZFS=y of course), then building the kernel.

I did get some build warnings, don't know if those are related to building without modules:

# make -j4
...
  AR      init/built-in.a
  LD      vmlinux.o
  MODPOST vmlinux.symvers
  MODINFO modules.builtin.modinfo
  GEN     modules.builtin
  LD      .tmp_vmlinux.kallsyms1
ld: warning: orphan section `.eh_frame' from `fs/zfs/icp/asm-x86_64/modes/aesni-gcm-x86_64.o' being placed in section `.eh_frame'
ld: warning: orphan section `.eh_frame' from `fs/zfs/icp/asm-x86_64/modes/ghash-x86_64.o' being placed in section `.eh_frame'
  KSYMS   .tmp_vmlinux.kallsyms1.S
  AS      .tmp_vmlinux.kallsyms1.S
  LD      .tmp_vmlinux.kallsyms2
ld: warning: orphan section `.eh_frame' from `fs/zfs/icp/asm-x86_64/modes/aesni-gcm-x86_64.o' being placed in section `.eh_frame'
ld: warning: orphan section `.eh_frame' from `fs/zfs/icp/asm-x86_64/modes/ghash-x86_64.o' being placed in section `.eh_frame'
  KSYMS   .tmp_vmlinux.kallsyms2.S
  AS      .tmp_vmlinux.kallsyms2.S
  LD      vmlinux
ld: warning: orphan section `.eh_frame' from `fs/zfs/icp/asm-x86_64/modes/aesni-gcm-x86_64.o' being placed in section `.eh_frame'
ld: warning: orphan section `.eh_frame' from `fs/zfs/icp/asm-x86_64/modes/ghash-x86_64.o' being placed in section `.eh_frame'
  SORTTAB vmlinux
...

Seems to boot ok:
[ 0.281301] ZFS: Loaded module v2.0.5-r0-gentoo, ZFS pool version 5000, ZFS filesystem version 5

And the pool is visible:

# zpool status
  pool: pool1
 state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
	still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
	the pool may no longer be accessible by software that does not support
	the features. See zpool-features(5) for details.
  scan: resilvered 2.06T in 04:51:52 with 0 errors on Fri Sep  3 19:52:36 2021
config:

	NAME                                                STATE     READ WRITE CKSUM
	pool1                                               ONLINE       0     0     0
	  mirror-0                                          ONLINE       0     0     0
	    ata-WDC_WD30EFRX-68EUZN0_WD-WCC4N0988278-part1  ONLINE       0     0     0
	    ata-WDC_WD60EFZX-68B3FN0_WD-C80RNLAG-part1      ONLINE       0     0     0

I will hold off upgrading the pool until things seem stable, and I will comment again here if any problems arise.

@beeselmane
Copy link

Hello, I was wondering if there was any update on this issue? I'm currently getting the same issue on an up to date Gentoo system with kernel version 5.10.76 with CONFIG_MODULES=n when installing ZFS-2.2.1 from portage. The workaround posted above seems to be working for me, I temporarily enabled modules to get the sources to copy to the kernel source tree, and the kernel build completed without issue, but it seems autoconf shouldn't require CONFIG_MODULES when run with the --enable-linux-builtin option.

@szubersk
Copy link
Contributor

szubersk commented Apr 20, 2022

The problem here is that while logically, from user perspective, OpenZFS should not require CONFIG_MODULES to be enabled with --enable-linux-builtin, all autoconf checks are attempts to compile a stub Linux module to test certain Linux source code and configuration capabilities.

If you guys see a way out of this (maintaining autoconf check capabilities and not having to compile stub modules) we are all eyes.

Trivia: it was working fine (by accident) in Linux 4.X until https://www.spinics.net/lists/kernel/msg3889180.html happened in Linux 5.X.

@behlendorf behlendorf added Status: Understood The root cause of the issue is known and removed Type: Defect Incorrect behavior (e.g. crash, hang) labels Apr 20, 2022
@szubersk
Copy link
Contributor

@nihil-2019 @beeselmane @arvidbrodin please apply #13361 to see if it helps your cause.

behlendorf pushed a commit that referenced this issue Apr 26, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes #10832
Closes #13361
behlendorf pushed a commit to behlendorf/zfs that referenced this issue May 17, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361
behlendorf pushed a commit that referenced this issue May 20, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes #10832
Closes #13361
sdimitro pushed a commit to sdimitro/zfs that referenced this issue May 23, 2022
* Improve the inline descriptions of the ARC module parameters

These are displayed as the descriptions of the sysctl's on FreeBSD

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes openzfs#13334

* linux: module: weld all but spl.ko into zfs.ko

Originally it was thought it would be useful to split up the kmods
by functionality.  This would allow external consumers to only load
what was needed.  However, in practice we've never had a case where
this functionality would be needed, and conversely managing multiple
kmods can be awkward.  Therefore, this change merges all but the
spl.ko kmod in to a single zfs.ko kmod.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13274

* scripts: zfs.sh: remove cat

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13274

* scripts: zfs.sh: make usage make sense

We don't pass the arguments as arguments

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13274

* scripts: zfs.sh: unload zfs with dependencies

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13274

* linux: module: uninstall legacy modules on (un)installation

This can be reverted once we're sure nobody's using them anymore
(post-3.0 release?)

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13274

* zpool_history_unpack: return correct errno on nvlist_unpack failure

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com>
Signed-off-by: WHR <msl0000023508@gmail.com>
Closes openzfs#13321

* Document zfs inherit -S's interaction with noninheritable properties

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#11894
Closes openzfs#13335

* rpm -> deb doesn't fail when optional packages are missing

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#13331
Closes openzfs#13336

* man: ... -> … again

zfs-program.8 is left, but that's literal Lua syntax

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13255

* FreeBSD: Fix translation from ABD to physical pages

In hypothetical case of non-linear ABD with single segment, multiple
to page size but not aligned to it, vdev_geom_fill_unmap_cb() could
fill one page less into bio_ma array.

I am not sure it is exploitable, but better to be safe than sorry.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reported-by: Mark Johnston <markj@FreeBSD.org>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes openzfs#13345

* Corrected oversight in ZERO_RANGE behavior

It turns out, no, in fact, ZERO_RANGE and PUNCH_HOLE do
have differing semantics in some ways - in particular,
one requires KEEP_SIZE, and the other does not.

Also added a zero-range test to catch this, corrected a flaw
that made the punch-hole test succeed vacuously, and a typo
in file_write.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes openzfs#13329 
Closes openzfs#13338

* contrib: dracut: parse-zfs: drop initqueue-finished for i/f

The switch was released in dracut 009 in March 2011,
we can safely get rid of the compatibility hook

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13291

* contrib: dracut: parse-zfs: stop pretending we support FILESYSTEM=

It was added in the original ae26d04 ("Add dracut support") commit
in 2011, and was then broken a bit later with the advent of
dracut-zfs-generator, or maybe earlier as part of other churn

Either way, it's broken, and has been in 2.0+ as well, and no-one
complained. Stop pretending we support it at all

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13291

* contrib; dracut: centralise root= parsing, actually support root=s

So far, everything parsed root= manually, which meant that while
zfs-parse.sh was updated, and supposedly supported + -> ' ' conversion,
it meant nothing

Instead, centralise parsing, and allow:
  root=
  root=zfs
  root=zfs:
  root=zfs:AUTO

  root=ZFS=data/set
  root=zfs:data/set
  root=zfs:ZFS=data/set (as a side-effect; allowed but undocumented)

  rootfstype=zfs AND root=data/set <=> root=data/set
  rootfstype=zfs AND root=         <=> root=zfs:AUTO

So rootfstype=zfs /also/ behaves as expected, and + decoding works

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13291

* contrib; dracut: flatten zfs-load-key, simplify zfs-env-bootfs

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13291

* contrib: dracut: zfs-lib: simplify ask_for_password

The only user is mount-zfs.sh (non-systemd systems),
so reduce it to what it needs

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13291

* contrib: dracut: zfs-lib: remove find_bootfs

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13291

* contrib: dracut: inline single-use import_pool, move single-use ask_for_password

Also don't set ROOTFS_MOUNTED; the final mention was removed in dracut
011 from July 2011

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13291

* contrib: dracut: don't require essentials to be under the same encroot

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13291

* contrib: dracut: zfs-{rollback,snapshot}-bootfs: order after key loading

This fixes at least one race I got with an encrypted root

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13291

* contrib: dracut: zfs-needshutdown: don't list

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13291

* Add dracut.zfs.7

Thorough documentation with a dracut.bootup(7)-style flowchart,
dracut.cmdline(7)-style cmdline listing,
and per-file docs like the old README

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13291

* contrib: dracut: remove getargbool polyfill

It was originally released in dracut 008 in February 2011;
we can probably drop it now

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13291

* Strengthen Linux kernel capabilities detection

- Add `CONFIG_BLOCK` Linux config requirement to
  `ZFS_AC_KERNEL_CONFIG_DEFINED`. OpenZFS won't compile without
  that block device support due to large amount of functional
  dependencies on it.

- Remove dependency on `groups_alloc()` in
  `ZFS_AC_KERNEL_SRC_GROUP_INFO_GID` to circumvent the missing stub
  in Linux 4.X kernel headers.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#13351

* scripts: zfs.sh: explicitly ignore unloaded modules when unloading

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13356

* scripts: zfs.sh: explicitly unload all modules via rmmod

modprobe -r only works for depmodded modules, but this also means we
have to re-iterate legacy modules, and in the right order

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13356

* linux: module: zfs: sysfs: constify types and attrs

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13357

* Linux 5.18 compat: kobj_type.default_attrs replaced with default_groups

Upstream-commit: cdb4f26a63c391317e335e6e683a614358e70aeb ("kobject:
 kobj_type: remove default_attrs")
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13357

* zvol_wait: Ignore locked zvols

"When an encrypted zvol is locked the zfs-volume-wait service does not
start.  The /sbin/zvol_wait should not wait for links when the volume
has property keystatus=unavailable."
-- https://bugs.launchpad.net/ubuntu/+source/zfs-linux/+bug/1888405

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com>
Thanks: James Dingwall <james-launchpad@dingwall.me.uk>
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes openzfs#10662

* man: zfs-send.8: fix -X synopses and description

Also clean up the horrendously verbose -X handling in zfs_main()

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13352

* tests: cli_user: zfs_001_neg: print the problematic lines

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13352

* Improve zpool status output, list all affected datasets

Currently, determining which datasets are affected by corruption is
a manual process.

The primary difficulty in reporting the list of affected snapshots is
that since the error was initially found, the snapshot where the error
originally occurred in, may have been deleted. To solve this issue, we
add the ID of the head dataset of the original snapshot which the error
was detected in, to the stored error report. Then any time a filesystem
is deleted, the errors associated with it are deleted as well. Any time
a clone promote occurs, we modify reports associated with the original
head to refer to the new head. The stored error reports are identified
by this head ID, the birth time of the block which the error occurred
in, as well as some information about the error itself are also stored.

Once this information is stored, we can find the set of datasets
affected by an error by walking back the list of snapshots in the given
head until we find one with the appropriate birth txg, and then traverse
through the snapshots of the clone family, terminating a branch if the
block was replaced in a given snapshot. Then we report this information
back to libzfs, and to the zpool status command, where it is displayed
as follows:

 pool: test
 state: ONLINE
status: One or more devices has experienced an error resulting in data
        corruption.  Applications may be affected.
action: Restore the file in question if possible.  Otherwise restore the
        entire pool from backup.
   see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A
  scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec  3
08:27:57 2021
config:

        NAME        STATE     READ WRITE CKSUM
        test        ONLINE       0     0     0
          sdb       ONLINE       0     0 1.58K

errors: Permanent errors have been detected in the following files:

        test@1:/test.0.0
        /test/test.0.0
        /test/1clone/test.0.0

A new feature flag is introduced to mark the presence of this change, as
well as promotion and backwards compatibility logic. This is an updated
version of openzfs#9175. Rebase required fixing the tests, updating the ABI of
libzfs, updating the man pages, fixing bugs, fixing the error returns,
and updating the old on-disk error logs to the new format when
activating the feature.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Co-authored-by: TulsiJain <tulsi.jain@delphix.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes openzfs#9175
Closes openzfs#12812

* Improve log spacemap load time

Previous flushing algorithm limited only total number of log blocks to
the minimum of 256K and 4x number of metaslabs in the pool.  As result,
system with 1500 disks with 1000 metaslabs each, touching several new
metaslabs each TXG could grow spacemap log to huge size without much
benefits.  We've observed one of such systems importing pool for about
45 minutes.

This patch improves the situation from five sides:
 - By limiting maximum period for each metaslab to be flushed to 1000
TXGs, that effectively limits maximum number of per-TXG spacemap logs
to load to the same number.
 - By making flushing more smooth via accounting number of metaslabs
that were touched after the last flush and actually need another flush,
not just ms_unflushed_txg bump.
 - By applying zfs_unflushed_log_block_pct to the number of metaslabs
that were touched after the last flush, not all metaslabs in the pool.
 - By aggressively prefetching per-TXG spacemap logs up to 16 TXGs in
advance, making log spacemap load process for wide HDD pool CPU-bound,
accelerating it by many times.
 - By reducing zfs_unflushed_log_block_max from 256K to 128K, reducing
single-threaded by nature log processing time from ~10 to ~5 minutes.

As further optimization we could skip bumping ms_unflushed_txg for
metaslabs not touched since the last flush, but that would be an
incompatible change, requiring new pool feature.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes openzfs#12789

* autoconf: Pretend `CONFIG_MODULES` is always on

- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361

* PPC get_user workaround

Linux 5.12 PPC 5.12 get_user() and __copy_from_user_inatomic()
inline helpers very indirectly include a reference to the GPL'd
array mmu_feature_keys[] and fails to build. Workaround this by
using copy_from_user() and throwing EFAULT for any calls to
__copy_from_user_inatomic(). This is a workaround until a fix
for Linux commit 7613f5a66becfd0e43a0f34de8518695888f5458
"powerpc/64s/kuap: Use mmu_has_feature()" is fully addressed.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Authored-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#11958
Closes openzfs#12590
Closes openzfs#13367

* zfs: holds: general cleanup

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13373

* zfs: holds: dequadratify

Before:
  15  0m0.177s
  30  0m0.653s
  45  0m1.289s
  60  0m2.129s
  75  0m3.264s
  90  0m4.397s
  100 0m5.996s
  117 0m8.552s

After:
  30  0m0.053s
  117 0m0.125s

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes openzfs#13372
Closes openzfs#13373

* Linux 5.18 compat: replace __set_page_dirty_nobuffers

Replace __set_page_dirty_nobuffers with filemap_dirty_folio.

Upstream-commit: 6b1f86f8e9c7f9de7ca1cb987b2cf25e99b1ae3a
("Merge tag 'folio-5.18b' of
git://git.infradead.org/users/willy/pagecache ")

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Authored-by: Satadru Pramanik <satadru@gmail.com>
Signed-off-by: Satadru Pramanik <satadru@gmail.com>
Closes openzfs#13325
Closes openzfs#13380

* Fix O_APPEND for Linux 3.15 and older kernels

When using a Linux kernel which predates the iov_iter interface the
O_APPEND flag should be applied in zpl_aio_write() via the call to
generic_write_checks().  The updated pos variable  was incorrectly
ignored resulting in the current offset being used.

This issue should only realistically impact the RHEL/CentOS 7.x
kernels which are based on Linux 3.10.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes openzfs#13370 
Closes openzfs#13377

Co-authored-by: Allan Jude <allan@klarasystems.com>
Co-authored-by: наб <nabijaczleweli@nabijaczleweli.xyz>
Co-authored-by: Low-power <msl0000023508@gmail.com>
Co-authored-by: Damian Szuberski <szuberskidamian@gmail.com>
Co-authored-by: Alexander Motin <mav@FreeBSD.org>
Co-authored-by: Rich Ercolani <214141+rincebrain@users.noreply.github.com>
Co-authored-by: Richard Laager <rlaager@wiktel.com>
Co-authored-by: George Amanakis <gamanakis@gmail.com>
Co-authored-by: Satadru Pramanik <satadru@gmail.com>
Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
nicman23 pushed a commit to nicman23/zfs that referenced this issue Aug 22, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361
nicman23 pushed a commit to nicman23/zfs that referenced this issue Aug 22, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361
lundman pushed a commit to openzfsonwindows/openzfs that referenced this issue Sep 6, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361
beren12 pushed a commit to beren12/zfs that referenced this issue Sep 19, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361
andrewc12 pushed a commit to andrewc12/openzfs that referenced this issue Sep 23, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361
andrewc12 pushed a commit to andrewc12/openzfs that referenced this issue Sep 23, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361
andrewc12 pushed a commit to andrewc12/openzfs that referenced this issue Sep 23, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361
andrewc12 pushed a commit to andrewc12/openzfs that referenced this issue Sep 23, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361
andrewc12 pushed a commit to andrewc12/openzfs that referenced this issue Sep 23, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361
andrewc12 pushed a commit to andrewc12/openzfs that referenced this issue Sep 23, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361
andrewc12 pushed a commit to andrewc12/openzfs that referenced this issue Sep 23, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361
andrewc12 pushed a commit to andrewc12/openzfs that referenced this issue Sep 23, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361
andrewc12 pushed a commit to andrewc12/openzfs that referenced this issue Sep 23, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361
andrewc12 pushed a commit to andrewc12/openzfs that referenced this issue Sep 23, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361
andrewc12 pushed a commit to andrewc12/openzfs that referenced this issue Sep 23, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361
andrewc12 pushed a commit to andrewc12/openzfs that referenced this issue Sep 23, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361
andrewc12 pushed a commit to andrewc12/openzfs that referenced this issue Sep 23, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361
andrewc12 pushed a commit to andrewc12/openzfs that referenced this issue Sep 23, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361
andrewc12 pushed a commit to andrewc12/openzfs that referenced this issue Sep 23, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361
andrewc12 pushed a commit to andrewc12/openzfs that referenced this issue Sep 23, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361
andrewc12 pushed a commit to andrewc12/openzfs that referenced this issue Sep 23, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361
andrewc12 pushed a commit to andrewc12/openzfs that referenced this issue Sep 23, 2022
- Unconditionally inject `CONFIG_MODULES` make variable
  and `#define CONFIG_MODULES` to Kbuild in `ZFS_LINUX_COMPILE`
  autoconf function to emulate loadable kernel modules support.
  This allows OpenZFS to perform Linux checks despite
  `CONFIG_MODULES=n` in the actual Linux config.

- Add `ZFS_AC_KERNEL_CONFIG_MODULES` check which encompasses
  the logic from `ZFS_AC_KERNEL_TEST_MODULE` with additional
  diagnostic messages to the user

- Removed `ZFS_AC_KERNEL_TEST_MODULE` as it merely duplicates
  every check in `ZFS_AC_KERNEL_CONFIG_DEFINED`

- Moved `ZFS_AC_MODULE_SYMVERS` after `ZFS_AC_KERNEL_CONFIG_DEFINED`
  so the user has a chance to see the proper diagnostic from the
  steps before.

A workaround for Linux's

```
commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68
Author: Masahiro Yamada <masahiroy@kernel.org>
Date:   Wed Mar 31 22:38:03 2021 +0900

kbuild: unify modules(_install) for in-tree and external modules

If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.

Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes openzfs#10832
Closes openzfs#13361
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Status: Understood The root cause of the issue is known Type: Building Indicates an issue related to building binaries
Projects
None yet
Development

Successfully merging a pull request may close this issue.

6 participants