Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

X96Max+ PHY (IP1001M) - network does not work when boot from EMMC #309

Closed
psergeevich opened this issue May 14, 2022 · 14 comments
Closed

X96Max+ PHY (IP1001M) - network does not work when boot from EMMC #309

psergeevich opened this issue May 14, 2022 · 14 comments
Labels
question Further information is requested

Comments

@psergeevich
Copy link

psergeevich commented May 14, 2022

Good day. Network works normal when device boot from USB. But when it boot from EMMC, network does not work. At post #282 (comment) you have written it will be fixed in next kernet version, but it's not.
boot_logs.zip

@ophub
Copy link
Owner

ophub commented May 14, 2022

When you tested in #258, did you test in usb or emmc?

@ophub
Copy link
Owner

ophub commented May 14, 2022

#258 (comment)

@psergeevich
Copy link
Author

When you tested in #258, did you test in usb or emmc?

In #258 I tested only USB

@ophub
Copy link
Owner

ophub commented May 15, 2022

Which version of firmware are you using, have you tried both kernels?

cat /etc/ophub-release
cat /boot/uEnv.txt
ls -l /boot

@ophub ophub closed this as completed May 17, 2022
@psergeevich
Copy link
Author

I tried both kernels. Results in attachment: result.zip
I boot each kernel from USB, EMMC and microSD and test PHY:

5.10.116
USB: -
EMMC: -
microSD: +

5.15.40
USB: +
EMMC: -
microSD: -

+ PHY is working
- PHY does not working

@ophub
Copy link
Owner

ophub commented May 18, 2022

#258 (comment)

You re-measure, someone reports that his test results are the opposite of yours:#258 (comment)

@psergeevich
Copy link
Author

I re-measured and and got the same results as last time:
Pins and voltages:
48 - 3.3v
49 - 3.3v
50 - 0.18v
51 - 0.18v
53 - 0.18v
7 - 1.8v
8 - 1.8v

@ophub
Copy link
Owner

ophub commented May 18, 2022

When @harrydou123 equipment arrives, he will test it again.

@ophub
Copy link
Owner

ophub commented May 18, 2022

@psergeevich

cat /boot/extlinux/extlinux.conf
cat /boot/uEnv.txt

@psergeevich
Copy link
Author

Results here: boot_files.zip
In 5.15.40 image /boot/extlinux is absent, and PHY working when boot from USB. I tried remove /boot/extlinux from 5.10.116 USB flash and boot from it, PHY also start working!
When I remove /boot/extlinux from EMMC (both 5.15.40 and 5.10.116) and boot from EMMC, PHY did not work.

@ophub
Copy link
Owner

ophub commented Jun 1, 2022

meson-sm1-x96-max-plus-ip1001m.dtb.zip

Download this file and unzip it, then overwrite the file with the same name in /boot/dtb/amlogic/meson-sm1-x96-max-plus-ip1001m.dtb and restart it. Feedback the test results.

@ophub ophub added the question Further information is requested label Jun 1, 2022
@psergeevich
Copy link
Author

image
+ PHY is working
- PHY does not working
result.zip

@ophub
Copy link
Owner

ophub commented Jun 3, 2022

ophub/amlogic-s9xxx-openwrt#262

Are there 2 different variants? There are always opposite test results.

@psergeevich
Copy link
Author

May be. Waiting for a photo from manalwong

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
question Further information is requested
Projects
None yet
Development

No branches or pull requests

2 participants