How to Run

• Admin with menubox.sh
• How to Run and view verbose log messages
• How to Run

There are several ways to start speed-cam.py and webserver.py

1. run.sh can run programs using supervisorctrl service as background tasks. This will try to autostart. logs are sent to /var/logs
2. menubox.sh is a whiptail menu system that has menu picks to stop, start and display status
3. programs can be run directly from command line eg ./speed-cam.py

Admin with menubox.sh

If you do not wish to see speed camera verbose tracking data you can run menubox.sh

cd ~/speed-camera
./menubox.sh

How to Run and view verbose log messages

Edit config.py and verify variable verbose = True

cd ~/speed-camera
./speed-cam.py

How to Run

To run speed-cam.py as a background task or on boot from /etc/rc.local then

cd ~/speed-camera
./speed-cam.sh start

or to run on boot edit /etc/rc.local file using nano editor per command below

sudo nano /etc/rc.local

Then add line below before the exit line then ctrl-x y to save and reboot to test

/home/pi/speed-camera/speed-cam.sh start
exit 0    

Edit the speed-cam.sh script to suit your needs per comments.
Note you may need to change the sleep delay time if rc.local does not run script successfully at boot, since services may need more time to start.

To Run using python3 perform the following (Note you must have opencv setup for python3) NOTE: IMHO operation under python3 is not faster compared to python2. I recommend you run under python2

sudo apt-get install -y python3-pip  
sudo pip-3.2 install -y Pillow
python3 ./speed-cam.py

if you get opengl error then install support library per following command then reboot.

sudo apt-get install libgl1-mesa-dri  

also on raspberry pi 3's activate opengl support using

sudo raspi-config,

From 9 Advanced Options select AA GL Driver then enable driver and reboot

How to Change Settings