Ensure candidate validation, disputes and approvals work, even if the candidate's relay parent state was pruned. #1359
Assignees
Labels
T10-tests
This PR/Issue is related to tests.
Comments
|
A more unit test like approach might also work and be easier. |
|
Unit tests in all those subsystems, where Runtime API requests at the candidate's relay parent are blanket rejected with an error that state is not available, would be adequate coverage, I believe. |
Well, maybe not. We'd introduce some kind of wrapper for answering runtime API requests (and dropping them if the relay parent is the candidate relay parent), and then we'd need to make sure that unit tests use this wrapped. ZombieNet/integration tests might be necessary for a holistic test. |
Zombienet have a |
|
This issue has been mentioned on Polkadot Forum. There might be relevant details there: https://forum.polkadot.network/t/stalled-parachains-on-kusama-post-mortem/3998/1 |
14 tasks
14 tasks
14 tasks
eskimor
pushed a commit
that referenced
this issue
Nov 27, 2023
**Overview:** Adding an extra malus variant focusing on disputing finalized blocks. It will: - wrap around approval-voting - listen to `OverseerSignal::BlockFinalized` and when encountered start a dispute for the `dispute_offset`th ancestor - simply pass through all other messages and signals Add zombienet tests testing various edgecases: - disputing freshly finalized blocks - disputing stale finalized blocks - disputing eagerly pruned finalized blocks (might be separate PR) **TODO:** - [x] Register new malus variant - [x] Simple pass through wrapper (approval-voting) - [x] Simple network definition - [x] Listen to block finalizations - [x] Fetch ancestor hash - [x] Fetch session index - [x] Fetch candidate - [x] Construct and send dispute message - [x] zndsl test 1 checking that disputes on fresh finalizations resolve valid Closes #1365 - [x] zndsl test 2 checking that disputes for too old finalized blocks are not possible Closes #1364 - [ ] zndsl test 3 checking that disputes for candidates with eagerly pruned relay parent state are handled correctly #1359 (deferred to a separate PR) - [x] Unit tests for new malus variant (testing cli etc) - [x] Clean/streamline error handling - [ ] ~~Ensure it tests properly on session boundaries~~ --------- Co-authored-by: Javier Viola <javier@parity.io> Co-authored-by: Marcin S. <marcin@realemail.net> Co-authored-by: Tsvetomir Dimitrov <tsvetomir@parity.io>
claravanstaden
added a commit
to Snowfork/polkadot-sdk
that referenced
this issue
Dec 6, 2023
* [ci] Enable zombienet jobs in PRs (#2361)
Since preparation for the merge queues needs more time I'm enabling
zombienet jobs in PRs CI back.
* westend: remove SessionKeys migration already applied on-chain (#2363)
Westend now successfully updated to `spec: 103000`, we **have to
remove** the session keys migration before the next release as it
doesn't gracefully handle reapplying it.
* implementers-guide: update github link (#2368)
cc @joepetrowski
* Fix Typo: `PalletXcmExtrinsicsBenchmark` (#2354)
Missed in https://github.com/paritytech/polkadot-sdk/pull/1672
* add pallet nomination-pools versioned migration to kitchensink (#2167)
The versioned migrations are already there in pallet nomination-pools:
https://github.com/paritytech/polkadot-sdk/blob/f6ee4781f633f0f89598f7b230595afe401da8dc/substrate/frame/nomination-pools/src/migration.rs#L27-L48
Just updating the kitchensink runtime to point to them.
This is also nice because it points the dev to an example of how to use
`VersionedMigration`.
* fix typo (#2377)
* bump zombienet version `v1.3.80` (#2376)
New release includes logic to move all jobs to `spot instances`.
Thx!
* [NPoS] Check if staker is exposed in paged exposure storage entries (#2369)
Addresses a bug caused by
https://github.com/paritytech/polkadot-sdk/pull/1189. The changes are
still not released yet, so would like to push the fix soon so it can go
together with the release of the above PR.
`fast_unstake` checks if a staker is exposed in an era. However, this fn
is still returning whether the staker is exposed based on the old
storage item. This PR fixes that by looking in both old and new exposure
storages.
Also adds some integrity tests for paged exposures.
* Beefy: small fixes (#2378)
Related to #2285
- save the state of the BEEFY gadget after processing a finality proof.
We need this in order to avoid skipping blocks.
- avoid reprocessing the old state when not necessary
* crypto: `lazy_static` removed, light parser for address URI added (#2250)
The `lazy_static` package does not work well in `no-std`: it requires
`spin_no_std` feature, which also will propagate into `std` if enabled.
This is not what we want.
This PR provides simple address uri parser which allows to get rid of
_regex_ which was used to parse the address uri, what in turns allows to
remove lazy_static.
Three regular expressions
(`SS58_REGEX`,`SECRET_PHRASE_REGEX`,`JUNCTION_REGEX`) were replaced with
the parser which unifies all of them.
The new parser does not support Unicode, it is ASCII only.
Related to: #2044
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Koute <koute@users.noreply.github.com>
Co-authored-by: command-bot <>
* [trivial] asset-hubs runtimes: fix incorrect doc-comments (#2384)
Fix some incorrect doc-comments
* Do not panic if the `fdlimit` call to increase the file descriptor limit fails (#2155)
# Description
Sometimes changing file descriptor limits is not allowed, but there is
no need to crash the node if/when this happens. Since `fdlimit`'s author
decided to use panics instead of returning `Result`, we need to catch
it.
# Checklist
- [x] My PR includes a detailed description as outlined in the
"Description" section above
- [ ] My PR follows the [labeling requirements](CONTRIBUTING.md#Process)
of this project (at minimum one label for `T`
required)
- [ ] I have made corresponding changes to the documentation (if
applicable)
- [ ] I have added tests that prove my fix is effective or that my
feature works (if applicable)
---------
Co-authored-by: Koute <koute@users.noreply.github.com>
* Relax `force_default_xcm_version` for testnet system parachains (#2385)
This PR fixes two things:
- relax `force_default_xcm_version` for testnet system parachains (e.g.
BridgeHubWestend has now 2 and there is no way to change it to 3, so we
need to call `force_xcm_version(3)` for every parachain that it is
connected to, because we send XCMv3 messages)
- add `Storage` item to `PolkadotXcm` pallet definition (now we cannot
see storage items for `pallet_xcm` in PJS)
## TODO
- [ ] when merged open PR to `polkadot-fellows/runtimes` repo
* Make collator RPC mode non-experimental (#2381)
The `--relay-chain-rpc-urls` CLI flag has been available for a while
now. We have collators with this running and parachain teams are also
using it. It should be fine now to remove the experimental status.
* Fix migrations and add CI check for new system chains (#2336)
Westend Collectives migration CI check can be fixed once we have
https://github.com/paritytech/try-runtime-cli/pull/58, will open another
PR once it is available.
- [x] Remove deprecated `DmpQueue` pallet from Rococo Contracts, the
migration is complete
- [x] Fix Asset Hub Rococo storage versions
- [x] Add migration check CI for Asset Hub Rococo and Westend Bridge Hub
* Bump bandersnatch VRF revision (#2389)
Closes https://github.com/paritytech/polkadot-sdk/issues/2327
cc @burdges
* Bump secp256k1 from 0.24.3 to 0.28.0 (#2357)
Bumps [secp256k1](https://github.com/rust-bitcoin/rust-secp256k1) from
0.24.3 to 0.28.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/rust-bitcoin/rust-secp256k1/blob/master/CHANGELOG.md">secp256k1's
changelog</a>.</em></p>
<blockquote>
<h1>0.28.0 - 2023-10-23</h1>
<ul>
<li>Add bindings to the ElligatorSwift implementation <a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/627">#627</a></li>
<li>Depend on recent release of <code>bitcoin_hashes</code> v0.13.0 <a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/621">#621</a></li>
<li>Add a verify function to <code>PublicKey</code> <a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/618">#618</a></li>
<li>Add serialize function for schnorr::Signature <a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/607">#607</a></li>
<li>Bump MSRV to 1.48 <a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/595">#595</a></li>
<li>Remove implementations of <code>PartialEq</code>, <code>Eq</code>,
<code>PartialOrd</code>, <code>Ord</code>, and <code>Hash</code> from
the
<code>impl_array_newtype</code> macro. Users will now need to derive
these traits if they are wanted.</li>
</ul>
<h1>0.27.0 - 2023-03-15</h1>
<ul>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/588">Depend
on newly release <code>bitcoin_hashes</code> v0.12</a>.</li>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/578">Implement
<code>Debug</code> trait for <code>Scalar</code> type</a>.</li>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/582">Implement
<code>insecure-erase</code></a>.</li>
</ul>
<h1>0.26.0 - 2202-12-19</h1>
<ul>
<li>Update libsecp25k1 to v0.2.0</li>
</ul>
<h1>0.25.0 - 2022-12-07</h1>
<ul>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/548">Fix
soundness issue with <code>preallocated_gen_new</code></a></li>
<li>Update to <code>secp256k1-sys</code> <a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/549">v0.7.0</a></li>
<li>Use type system to <a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/483">improve
safety</a>.</li>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/490">Change
secp256k1-sys symbol names to 0_6_1</a>.</li>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/499">Introduce
<code>rustfmt</code></a> to the codebase.</li>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/507">Make
all raw pointer methods go through the CPtr trait</a>.</li>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/518">Make
comparison functions stable</a>.</li>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/512">Remove</a>
public constant <code>ONE_KEY</code> (consider using
<code>FromStr</code> as a replacement).</li>
</ul>
<h1>0.24.1 - 2022-10-25</h1>
<ul>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/issues/491">Fix
broken deserialization logic of <code>KeyPair</code></a> that previously
always panicked. After the patch deserialization only panics if neither
the <code>global-context</code> nor the <code>alloc</code> (default)
feature is active.</li>
</ul>
<h1>0.24.0 - 2022-07-20</h1>
<ul>
<li>Upgrade to new release of <a
href="https://github.com/rust-bitcoin/bitcoin_hashes/releases/tag/0.11.0">bitcoin_hashes</a>.</li>
</ul>
<h1>0.23.4 - 2022-07-14</h1>
<ul>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/474">Disable
automatic rerandomization of contexts under WASM</a></li>
</ul>
<h1>0.23.3 - 2022-06-29</h1>
<ul>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/465">Add
must_use for mut self key manipulation methods</a></li>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/466">Fix
fuzzing feature guard</a></li>
</ul>
<h1>0.23.2 - 2022-06-27</h1>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/rust-bitcoin/rust-secp256k1/commit/7de09c8050da12a13ef9ee3850597f69c887952d"><code>7de09c8</code></a>
Merge <a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/issues/256">rust-bitcoin/rust-secp256k1256</a>:
Tracking PR for release: `secp256k1 v0...</li>
<li><a
href="https://github.com/rust-bitcoin/rust-secp256k1/commit/3dc5b165401f249c01a88cec54061301cffd97a0"><code>3dc5b16</code></a>
Bump version to v0.28.0</li>
<li><a
href="https://github.com/rust-bitcoin/rust-secp256k1/commit/3aada83180beec2b9f5ab8e7b9280a5517d3bcde"><code>3aada83</code></a>
Merge <a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/issues/256">rust-bitcoin/rust-secp256k1256</a>:
Add bindings to the ElligatorSwift imp...</li>
<li><a
href="https://github.com/rust-bitcoin/rust-secp256k1/commit/39febcb866ce285d53052a3636602f04483aa710"><code>39febcb</code></a>
Create rust-bidings</li>
<li><a
href="https://github.com/rust-bitcoin/rust-secp256k1/commit/da4f67b274c3061717723a568cfb182e4e2e7cce"><code>da4f67b</code></a>
Merge <a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/issues/256">rust-bitcoin/rust-secp256k1256</a>:
Update vendored lib secp256k1 to v0.4.0</li>
<li><a
href="https://github.com/rust-bitcoin/rust-secp256k1/commit/80b2a8d4aa6ffa72041d569eab2278cd8c1ace2a"><code>80b2a8d</code></a>
Update vendored libsecp to v0.4.0</li>
<li><a
href="https://github.com/rust-bitcoin/rust-secp256k1/commit/d2285c929a086276ce6d1670d795c49191e30c65"><code>d2285c9</code></a>
ci: Remove MIPS* from CI</li>
<li><a
href="https://github.com/rust-bitcoin/rust-secp256k1/commit/0d58f50d523b40a78de0b87146208e3ad338c8ba"><code>0d58f50</code></a>
ci: generalize grp in "illegal callback" test</li>
<li><a
href="https://github.com/rust-bitcoin/rust-secp256k1/commit/acf9ac13e9f8df84dd52d2f012cda7211a6af10c"><code>acf9ac1</code></a>
delete <code>test_manual_create_destroy</code> test</li>
<li><a
href="https://github.com/rust-bitcoin/rust-secp256k1/commit/04ce50891bb0d49be5355f5c0d82db70d7dda65a"><code>04ce508</code></a>
lib: fix bad unit test</li>
<li>Additional commits viewable in <a
href="https://github.com/rust-bitcoin/rust-secp256k1/compare/secp256k1-0.24.3...secp256k1-0.28.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions
</details>
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
* Preserve artifact cache unless stale (#1918)
Co-authored-by: Marcin S <marcin@realemail.net>
* Pools: Add `MaxUnbonding` to metadata (#2397)
* Bump docker/build-push-action from 5.0.0 to 5.1.0 (#2404)
Bumps
[docker/build-push-action](https://github.com/docker/build-push-action)
from 5.0.0 to 5.1.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/docker/build-push-action/releases">docker/build-push-action's
releases</a>.</em></p>
<blockquote>
<h2>v5.1.0</h2>
<ul>
<li>Add <code>annotations</code> input by <a
href="https://github.com/crazy-max"><code>@crazy-max</code></a> in <a
href="https://redirect.github.com/docker/build-push-action/pull/992">docker/build-push-action#992</a></li>
<li>Add <code>secret-envs</code> input by <a
href="https://github.com/elias-lundgren"><code>@elias-lundgren</code></a>
in <a
href="https://redirect.github.com/docker/build-push-action/pull/980">docker/build-push-action#980</a></li>
<li>Bump <code>@babel/traverse</code> from 7.17.3 to 7.23.2 in <a
href="https://redirect.github.com/docker/build-push-action/pull/991">docker/build-push-action#991</a></li>
<li>Bump <code>@docker/actions-toolkit</code> from 0.13.0-rc.1 to
0.14.0 in <a
href="https://redirect.github.com/docker/build-push-action/pull/990">docker/build-push-action#990</a>
<a
href="https://redirect.github.com/docker/build-push-action/pull/1006">docker/build-push-action#1006</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/docker/build-push-action/compare/v5.0.0...v5.1.0">https://github.com/docker/build-push-action/compare/v5.0.0...v5.1.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/docker/build-push-action/commit/4a13e500e55cf31b7a5d59a38ab2040ab0f42f56"><code>4a13e50</code></a>
Merge pull request <a
href="https://redirect.github.com/docker/build-push-action/issues/1006">#1006</a>
from docker/dependabot/npm_and_yarn/docker/actions-t...</li>
<li><a
href="https://github.com/docker/build-push-action/commit/74166686865cdc289a02f214871fb53447b73447"><code>7416668</code></a>
chore: update generated content</li>
<li><a
href="https://github.com/docker/build-push-action/commit/b4f76a5dc6a67282180eddc6d460f23bc97bfcbc"><code>b4f76a5</code></a>
chore(deps): Bump <code>@docker/actions-toolkit</code> from 0.13.0 to
0.14.0</li>
<li><a
href="https://github.com/docker/build-push-action/commit/b7feb766fae338d85274c87a9d0f24c09690dbe2"><code>b7feb76</code></a>
Merge pull request <a
href="https://redirect.github.com/docker/build-push-action/issues/1005">#1005</a>
from crazy-max/ci-inspect</li>
<li><a
href="https://github.com/docker/build-push-action/commit/fae8018297c67066fff64a6e9c319c86f89b8982"><code>fae8018</code></a>
ci: inspect sbom and provenance</li>
<li><a
href="https://github.com/docker/build-push-action/commit/b625868b13c3feb675cabbf9bfeb52ae94166606"><code>b625868</code></a>
Merge pull request <a
href="https://redirect.github.com/docker/build-push-action/issues/1004">#1004</a>
from crazy-max/ci-update-buildx</li>
<li><a
href="https://github.com/docker/build-push-action/commit/5193ef1da6ea0d66de97d22817c258b203ade96a"><code>5193ef1</code></a>
ci: update buildx to latest</li>
<li><a
href="https://github.com/docker/build-push-action/commit/d3afd779e409ac26db5374fb27fe4aae9f6adb42"><code>d3afd77</code></a>
Merge pull request <a
href="https://redirect.github.com/docker/build-push-action/issues/991">#991</a>
from docker/dependabot/npm_and_yarn/babel/traverse-7....</li>
<li><a
href="https://github.com/docker/build-push-action/commit/7a786bb2b9408f7f997564f677248fabd4b886d5"><code>7a786bb</code></a>
Merge pull request <a
href="https://redirect.github.com/docker/build-push-action/issues/992">#992</a>
from crazy-max/annotations</li>
<li><a
href="https://github.com/docker/build-push-action/commit/c66ae3adcfbf698ecd851c6bb782654a0c6ffcae"><code>c66ae3a</code></a>
chore: update generated content</li>
<li>Additional commits viewable in <a
href="https://github.com/docker/build-push-action/compare/0565240e2d4ab88bba5387d719585280857ece09...4a13e500e55cf31b7a5d59a38ab2040ab0f42f56">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* remove retry from backers on failed candidate validation (#2182)
Hey guys, as discussed I've changed the name to a more general one
`PvfExecKind`, is this good or too general?
Creating this as a draft, I still have to fix the tests.
Closes #1585
Kusama address: FkB6QEo8VnV3oifugNj5NeVG3Mvq1zFbrUu4P5YwRoe5mQN
---------
Co-authored-by: command-bot <>
Co-authored-by: Marcin S <marcin@realemail.net>
* bump zombienet version `v1.3.82` (#2396)
Includes:
- bump `pjs` modules versions
- re-enable test disable in
https://github.com/paritytech/polkadot-sdk/pull/2294
---------
Co-authored-by: Bastian Köcher <info@kchr.de>
* `chain-spec-builder`: cleanup (#2174)
This PR removes:
- `New`, `Generate`, `Edit` commands,
- `kitchensink` dependency
from the `chain-spec-builder` util.
New `convert-to-raw`, `update-code` commands were added.
Additionally renames the `runtime` command (which was added in #1256) to
`create`.
---------
Co-authored-by: Sebastian Kunert <skunert49@gmail.com>
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: command-bot <>
* Refactor `ValidationError` (#2406)
* Add output positional arg to undying-collator cli (#2375)
Follow up from https://github.com/paritytech/polkadot-sdk/pull/2370 to
add `output` positional argument to undying-collator.
cc @JoshOrndorff
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
* PVF worker: switch on seccomp networking restrictions (#2221)
* cumulus-consensus-common: block import: `delayed_best_block` flag added (#2001)
This PR adds the `delayed_best_block` flag to `ParachainBlockImport`. If
not set, the `params.fork_choice` is not updated (to
`ForkChoiceStrategy::Custom`) during the block import.
When `delayed_best_block` is set to `false` all parachain blocks on the
[longest
fork](https://github.com/paritytech/polkadot-sdk/blob/552be4800d9e4b480f79a300fc531783e04be099/substrate/client/service/src/client/client.rs#L708-L709)
will be notified as the best block, allowing transaction pool to be
updated with every imported block.
Otherwise imported blocks will not be notified as best blocks
(`fork_choice=ForkChoiceStrategy::Custom(false)`), and transaction pool
would be updated only with best block received from relay-chain.
Improvement for: #1202
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
* Different XCM builders, default one requires fee payment (#2253)
Adding on top of the new builder pattern for creating XCM programs, I'm
adding some more APIs:
```rust
let paying_fees: Xcm<()> = Xcm::builder() // Only allow paying for fees
.withdraw_asset() // First instruction has to load the holding register
.buy_execution() // Second instruction has to be `buy_execution`
.build();
let paying_fees_invalid: Xcm<()> = Xcm::builder()
.withdraw_asset()
.build(); // Invalid, need to pay for fees
let not_paying_fees: Xcm<()> = Xcm::builder_unpaid()
.unpaid_execution() // Needed
.withdraw_asset()
.deposit_asset()
.build();
let all_goes: Xcm<()> = Xcm::builder_unsafe() // You can do anything
.withdraw_asset()
.deposit_asset()
.build();
```
The invalid bits are because the methods don't even exist on the types
that you'd want to call them on.
---------
Co-authored-by: command-bot <>
* added action to pass review bot on merge queue (#2414)
This action will trigger when a merge queue is created and will add a
positive status check under the `review-bot` account, allowing the PR to
pass the required check for the merge.
---------
Co-authored-by: Chevdor <chevdor@users.noreply.github.com>
* Update tick collator for async backing (#1497)
This updates the tick runtime and polkadot-parachain collator to use
async backing.
* cumulus-test-service: block import fix (#2430)
This is follow-up for:
https://github.com/paritytech/polkadot-sdk/pull/2001
Block import queue for `test-parachain` (`cumulus-test-service`) shall
use delayed best block feature.
This should fixed broken zombienet tests.
* Deprecate `RewardDestination::Controller` (#2380)
Deprecates `RewardDestination::Controller` variant.
- [x] `RewardDestination::Controller` annotated with `#[deprecated]`.
- [x] `Controller` variant is now handled the same way as `Stash` in
`payout_stakers`.
- [x] `set_payee` errors if `RewardDestination::Controller` is provided.
- [x] Added `update_payee` call to lazily migrate
`RewardDestination::Controller` `Payee` storage entries to
`RewardDestination::Account(controller)` .
- [x] `payout_stakers_dead_controller` has been removed from benches &
weights - was not used.
- [x] Tests no longer use `RewardDestination::Controller`.
---------
Co-authored-by: command-bot <>
Co-authored-by: Gonçalo Pestana <g6pestana@gmail.com>
Co-authored-by: georgepisaltu <52418509+georgepisaltu@users.noreply.github.com>
* Revert docker images tag naming to <prnum-shortsha> (#2434)
Docker images from paritypr are also used in testnets. PR reverts docker
tags naming to a more convenient.
cc @PierreBesson
* Fixes import path in benchmark macro (#2437)
Fully-qualified path was not being used in benchmark macro for one of
the cases. This PR fixes this and removes the unnecessary import in a
couple of files, which I believe was done to fix this issue.
* PVF: Fix unshare "no such file or directory" error (#2426)
* Make TypeInfo for SkipCheckIfFeeless transparent, too (#2449)
The `SkipCheckifFeeless::IDENTIFIER` became transparent (ie was whatever
the inner signed ext was). This PR just makes the `TypeInfo` transparent
too, so that libraries that use said info to decode the data (ie subxt)
can behave identically whether or not the `SkipCheckifFeeless` wrapper
is used or not.
---------
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* work with additional key values (#1757)
Add the possibility to inject additional key-values in the
sproof-builder that generates the relay root that gets stored in
parachain-system.
Rationale: pallets that verify additional storage items (not those
verified by parachain-system) from the relay should be able to proof
against the relay root that gets stored in parachain-system. This PR
allows to create provide additional nibles that can later be used for
verifiability in other pallets
* polkadot-node-subsystems: `ChainApiBackend` added + `polkadot-debug` image version fixed (#2411)
The out-dated version (bad tag) of [polkadot
image](https://github.com/paritytech/polkadot-sdk/blob/ede4a362622dfa69eb167eaa876246b1289f4b41/.gitlab/pipeline/zombienet/cumulus.yml#L31)
([docker
info](https://hub.docker.com/layers/paritypr/polkadot-debug/master/images/sha256:adb1658052cf671b50c90d5cece5c7a131efa1a95978249bd5cb85a5ad654f7a?context=explore))
was used. This PR fixes this.
See also:
https://github.com/paritytech/polkadot-sdk/pull/2411#issuecomment-1822632724
Also adds an abstraction that allows asynchronous backends to be passed to `ChainApiSubsystem`
---------
Co-authored-by: Sebastian Kunert <skunert49@gmail.com>
* Remove `#[macro_use]` annotation from `mod service` in all nodes. (#2456)
This PR removes `#[macro_use]` from the service module in each of the
Substrate nodes in the repo.
* Parachain Template
* Polkadot Parachain
* Minimal Node
* Node Template
* Kitchen Sink Node
IDK why this annotation was present, maybe from when we had the
`new_partial!` macro?
---------
Co-authored-by: Joshy Orndorff <git-user-email.h0ly5@simplelogin.com>
* Add `on-chain-release-build` feature for Collectives Westend (#2463)
Collectives Westend is missing an `on-chain-release-build` feature flag.
* CI: Disable runtime upgrade spec name check on Westend Asset Hub and fix Staking pallet migration (#2447)
Westend Asset Hub currently failing because the spec name is being
changed next runtime upgrade
(https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4413125).
This also fixes an idempotency issue with a staking pallet migration.
Similar issues will be caught automatically now that we've also updated
to try-runtime-cli v0.5.0 which checks for idempotency issues.
This also enables try-state checks running in the CI.
* sp-api: Move macro related re-exports to `__private` (#2446)
This moves the macro related re-exports to `__private` to make it more
obvious for downstream users that they are using an internal api.
---------
Co-authored-by: command-bot <>
* Fix trait imports from sp-api (#2472)
Broken after #2446.
* Amend staking docs to account for state of controller deprecation (#2451)
Amends some staking pallet docs, and deprecation comment, to adjust to
the latest controller deprecation state.
Note, do we need the `README.md` file, which is a duplicate of the
pallet docs? Docs would be easier to maintain, and less ambiguity for
devs to refer to, if we had one source of truth in the generated pallet
docs.
* Make publish CI consistant and bump to v0.3.0 (#2453)
* pallet-xcm: ensure xcm outcome is always complete, revert effects otherwise (#2405)
On extrinsics/call, ensure local XCM execution is complete/successful.
Otherwise, fail the extrinsic so that state changes don't get committed
to the db.
Added regression tests that fail without the fix.
fixes #2237
---------
Co-authored-by: Adrian Catangiu <adrian@parity.io>
* pallet-staking: Converts all math operations to safe (#2435)
This PR converts unsafe math operations to safe in the staking pallet.
Closes https://github.com/paritytech/polkadot-sdk/issues/2431
---------
Co-authored-by: Ankan <10196091+Ank4n@users.noreply.github.com>
* Adapt test worker to profile flag (#2450)
closes #2194
cc @mrcnski
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
* Disable any peer connections for parachain nodes in pov-recovery zombienet test (#2475)
I noticed that this test broke at some point. The parachain nodes should
only acquire their blocks from the relay chain. But they were connecting
to their peers and started fetching blocks from there.
In this test I now take additional measures so we check that each nodes
really uses pov-recovery to get the blocks.
* Remove dmp-queue pallet from Rococo Asset Hub and Bridge Hub (#2483)
DMP queue migration is complete and the pallet should be removed to fix
the check runtime upgrade CI.
<img width="1501" alt="Screenshot 2023-11-24 at 16 05 37"
src="https://github.com/paritytech/polkadot-sdk/assets/16665596/ee1da6bb-2756-4423-8085-1e4c73553ad5">
<img width="1501" alt="Screenshot 2023-11-24 at 16 06 44"
src="https://github.com/paritytech/polkadot-sdk/assets/16665596/03f3e88f-aed8-4eaa-aab6-7998f72258be">
* relay-chain-consensus: set a fork_choice (#2462)
After #2001 the `fork_choice` strategy may remain uninitialized in the
block import pipeline which uses relay-chain verifier.
Refer to
https://github.com/paritytech/polkadot-sdk/pull/2430#issuecomment-1823979813
for some further discussion.
* Improve `UnpinHandleInner` debug (#2485)
Printing the `unpin_worker_sender` included the entire stacktrace and
that is a little bit too verbose.
* Derive `MaxEncodedLen` on `SlotDuration` (#2484)
# Description
Needed this in my code as part of the larger data structure.
---------
Co-authored-by: command-bot <>
* pallet-xcm: fix benchmarking (#2489)
Use non-zero weight limit in benchmarking `pallet_xcm::execute()` so the
given XCM actually executes.
* [NPoS] Use EraInfo to manipulate exposure in fast-unstake tests (#2459)
The FastUnstake pallet tests were previously directly modifying storage
items in the pallet-staking to alter exposure. However, due to the
introduction of the [new paged exposure
feature](https://github.com/paritytech/polkadot-sdk/pull/1189) these
tests were not testing against correct storage items. This issue
resulted in a bug that I didn't catch, which has been addressed in [this
fix](https://github.com/paritytech/polkadot-sdk/pull/2369).
This PR introduces a modification to how the pallet-fast-unstake handles
exposure. It now utilizes `pallet-staking::EraInfo` to set or mutate
Exposures.
* Remove `RuntimeApi` dependency on system parachain runtime code (#2455)
The last issue blocking the removal of the Polkadot and Kusama system
parachains from the repo in #1737 is the dependency on the runtime code
through the RuntimeApi in `polkadot-parachain`.
This PR introduces two fake runtimes to satisfy the build requirements
and changes the `new_partial` function to make it not be generic over
the runtimes.
The reason for the second runtime is the different Aura keys used in
Polkadot Asset Hub, as the impl for AuraApi depends on this type.
If this changes the `RuntimeApi` generic could be removed completely
from all functions in `services.rs` and and generic type parameters in
`services.rs` and specified as a concrete type to TFullClient`.
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
* Add missing workspace members (#2491)
The following members have been added:
```pre
cumulus/parachains/integration-tests/emulated/chains/parachains/testing/penpal
cumulus/parachains/testnets-common
polkadot/node/tracking-allocator
substrate/frame/examples/frame-crate
```
CI check can be added after
https://github.com/paritytech/pipeline-scripts/pull/105 is merged.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Bastian Köcher <git@kchr.de>
* bump zombienet version `v1.3.83` (#2492)
Include fix for `0002-parachains-upgrade-smoke-test` test.
* Do not pollute global base path with export genesis/wasm (#2487)
Otherwise the user may runs into weird errors if there is already a db.
* Zombienet: add polkadot-debug image publish as needs for cumulus tests (#2493)
Add `build-push-image-polkadot-debug` job to needs since we changed to
use the polkadot-debug image from the current branch for cumulus test
and we need to be sure that the image is ready. Fix issues like
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4481059
cc: @bkchr
Co-authored-by: Bastian Köcher <git@kchr.de>
* polkadot-parachain: one chain-spec for all (#2457)
This PR removes some `ChainSpec` types which are not necessary
(left-overs from #1256). Currently `ChainSpec` does not have to be
generic over the specific `RuntimeGenesisConfig`, it is enough to use
single type for all:
https://github.com/paritytech/polkadot-sdk/blob/9f787018857660440182142adc806954d7d07709/cumulus/polkadot-parachain/src/chain_spec/mod.rs#L53-L54
related to: https://github.com/paritytech/polkadot-sdk/issues/25
---------
Co-authored-by: command-bot <>
* Update documentation for SafeMode and TxPause Pallets (#2413)
# Description
Documentation for the TxPause and SafeMode pallets.
Based on reading and the notes from the following related PRs:
- https://github.com/paritytech/substrate/pull/12092
I believe this also completes the checklist to be able to close the
related PRs:
- Close #302
- Close #274
---------
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
* PVF: remove audit log access (#2461)
* New runtime `spec_version` format + backport of the bump to 1.4.0 (#2468)
## Overview
This PR aligns the `spec_version` formatting to the [recent
changes](https://github.com/polkadot-fellows/runtimes/pull/26/files#diff-efa4caeb17487ecb13d8f5eb7863c3241d84afa2e73fbf25909a2ca89df0f362R142)
made for the Polkadot/Kusama runtimes.
It also backports the latest version `v1.4.0` bumps as `1_004_000`.
## Details
During the switch from `v0.9` to `v1.x`, the format of the
`spec_version` was modified from: `(M)m_ppp` for a runtime considered on
version `M.m.pp`. For instance `0.9.42` had a `spec_version` of `9420`.
With the transition to `v1.x`, the format was changed to a bigger number
(still `u32`) formatted as `MM_mm_ppp` where `1.2.3` would be stored as
`01_02_003`.
This PR aligns the format with that has been introduced in the
fellowship repo: `MMM_mmm_ppp`.
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
* Zombienet tests - disputes on finalized blocks (#2184)
**Overview:**
Adding an extra malus variant focusing on disputing finalized blocks. It
will:
- wrap around approval-voting
- listen to `OverseerSignal::BlockFinalized` and when encountered start
a dispute for the `dispute_offset`th ancestor
- simply pass through all other messages and signals
Add zombienet tests testing various edgecases:
- disputing freshly finalized blocks
- disputing stale finalized blocks
- disputing eagerly pruned finalized blocks (might be separate PR)
**TODO:**
- [x] Register new malus variant
- [x] Simple pass through wrapper (approval-voting)
- [x] Simple network definition
- [x] Listen to block finalizations
- [x] Fetch ancestor hash
- [x] Fetch session index
- [x] Fetch candidate
- [x] Construct and send dispute message
- [x] zndsl test 1 checking that disputes on fresh finalizations resolve
valid Closes #1365
- [x] zndsl test 2 checking that disputes for too old finalized blocks
are not possible Closes #1364
- [ ] zndsl test 3 checking that disputes for candidates with eagerly
pruned relay parent state are handled correctly #1359 (deferred to a
separate PR)
- [x] Unit tests for new malus variant (testing cli etc)
- [x] Clean/streamline error handling
- [ ] ~~Ensure it tests properly on session boundaries~~
---------
Co-authored-by: Javier Viola <javier@parity.io>
Co-authored-by: Marcin S. <marcin@realemail.net>
Co-authored-by: Tsvetomir Dimitrov <tsvetomir@parity.io>
* Decomissioned PR-Custom-Review (#2503)
This PR decomissions
[`PR-Custom-Review`](https://github.com/paritytech/pr-custom-review) in
replacement for
[`Review-bot`](https://github.com/paritytech/review-bot).
* Build the standard library crates when building the runtimes (#2217)
Our executor currently only supports the WASM MVP feature set, however
nowadays when compiling WASM the Rust compiler has more features enabled
by default.
We do set the `-C target-cpu=mvp` flag to make sure that *our* code gets
compiled in a way that is compatible with our executor, however this
doesn't affect Rust's standard library crates (`std`, `core` and
`alloc`) which are by default precompiled and still can make use of
these extra features.
So in this PR we force the compiler to also compile the standard library
crates for us to make sure that they also only use the MVP features.
I've added the `WASM_BUILD_STD` environment variable which can be used
to disable this behavior if set to `0`.
Unfortunately this *will* slow down the compile times when building
runtimes, but there isn't much that we can do about that.
Fixes https://github.com/paritytech/polkadot-sdk/issues/1755
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
* asset-hub-westend-integration-tests: add more asset transfers tests (#2488)
Just adds more tests.
* Remove the timestamp handler (#2506)
* Staking: `chill_other` takes stash instead of controller (#2501)
The `chill_other` call is the only staking call that explicitly requires
`controller` in its signature. This PR changes the controller arg to be
the stash instead, with `StakingLedger` then fetching the controller
from storage.
This is not a breaking change per se - the call types do not change, but
is noteworthy as UIs will now want to pass the stash account into
`chill_other` calls, & metadata will reflect this.
Note: This is very low impact. `chill_other` has [hardly ever been
used](https://polkadot.subscan.io/extrinsic?address=&module=staking&call=chill_other&result=all&signedChecked=signed%20only&startDate=&endDate=&startBlock=&timeType=date&version=9431&endBlock=)
on Polkadot - notwithstanding the one called 11 days ago at block
18177457 that was a part of test I did, the last call was made 493 days
ago. Only 2 calls have ever been successful.
Addresses controller deprecation #2500
---------
Co-authored-by: command-bot <>
Co-authored-by: Gonçalo Pestana <g6pestana@gmail.com>
* CI: Fix `build-and-attach-release-runtimes.yml` (#2471)
Incorporate suggestion from release team to get this workflow working.
edit: worked on this test GH release:
https://github.com/paritytech/polkadot-sdk/releases/tag/liam-debug-ghw.
let's try it.
* Fixes cumulus README instructions (#2442)
README instructions fixes to be compatible with the `polkadot-prepare`
and `polkadot-execute` binary split.
* Pools: Add ability to configure commission claiming permissions (#2474)
Addresses #409.
This request has been raised by multiple community members - the ability
for the nomination pool root role to configure permissionless commission
claiming:
> Would it be possible to have a claim_commission_other extrinsic for
claiming commission of nomination pools permissionless?
This PR does not quite introduce this additional call, but amends
`do_claim_commission` to check a new `claim_permission` field in the
`Commission` struct, configured by an enum:
```
enum CommissionClaimPermission {
Permissionless,
Account(AccountId),
}
```
This can be optionally set in a bonded pool's
`commission.claim_permission` field:
```
struct BondedPool {
commission: {
<snip>
claim_permission: Option<CommissionClaimPermission<T::AccountId>>,
},
<snip>
}
```
This is a new field and requires a migration to add it to existing
pools. This will be `None` on pool creation, falling back to the `root`
role having sole access to claim commission if it is not set; this is
the behaviour as it is today. Once set, the field _can_ be set to `None`
again.
#### Changes
- [x] Add `commision.claim_permission` field.
- [x] Add `can_claim_commission` and amend `do_claim_commission`.
- [x] Add `set_commission_claim_permission` call.
- [x] Test to cover new configs and call.
- [x] Add and amend benchmarks.
- [x] Generate new weights + slot into call
`set_commission_claim_permission`.
- [x] Add migration to introduce `commission.claim_permission`, bump
storage version.
- [x] Update Westend weights.
- [x] Migration working.
---------
Co-authored-by: command-bot <>
* Added NetworkId::PolkadotBulletin variant (#2517)
We're going to bridge Polkadot Bridge Hub with [Polkadot Bulletin
chain](https://github.com/zdave-parity/polkadot-bulletin-chain) soon
(and Rococo Bridge Hub with 1:1 copy of Polkadot Bulletin chain even
sooner), so we need a variant for that chain in `NetworkId`. As
suggested, I'm adding a new variant for it to the `NetworkId` (we may
have used `ByGenesis(_)`, but decision was made to have a dedicated
variant for that).
* polkadot: disable block authoring backoff on production networks (#2510)
Currently the polkadot node will backoff from block authoring if
finality starts lagging. This PR disables this mechanism on production
networks (polkadot and kusama) and adds a flags to optionally force
enabling it.
* Set `frame_system::LastRuntimeUpgrade` after running `try-runtime` migrations (#2515)
Sets `frame_system::LastRuntimeUpgrade` after running try-runtime
migrations to better emulate real behavior.
This fixes an issue where migrations using the spec version to determine
whether to execute can incorrectly fail idempotency checks.
@s0me0ne-unkn0wn noticed this issue with the session key migration
introduced in https://github.com/paritytech/polkadot-sdk/pull/2265.
* Increase `cargo-check-each-crate-macos` timeout (#2519)
* Moves all test runtimes to use `derive_impl` (#2409)
Step in https://github.com/paritytech/polkadot-sdk/issues/171
This PR adds `derive_impl` on all `frame_system` config impls for mock
runtimes. The overridden configs are maintained as of now to ensure
minimal changes.
---------
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* PVF: Add test instructions (#2058)
* Remove `wasm-builder`'s README (#2525)
Followup of https://github.com/paritytech/polkadot-sdk/pull/2217
This PR deletes the README of the `wasm-builder` crate and moves its
docs back into the rustdoc, [as requested
here](https://github.com/paritytech/polkadot-sdk/pull/2217#discussion_r1406401175).
(:
* Remove `im-online` pallet from Rococo and Westend (#2265)
Co-authored-by: ordian <write@reusable.software>
Co-authored-by: Vladimir Istyufeev <vladimir@parity.io>
* polkadot: remove grandpa pause support (#2511)
This was never used and we probably don't need it anyway.
* Remove pov-recovery race condition/Improve zombienet test (#2526)
The test was a bit flaky on CI.
There was a race condition in the pov-recovery system. If the timing is
bad, it can happen that a block waits for a parent that is already
queued for import. The check if a block has children waiting happens
when we insert into the import queue. So we need to do an additional
check once we receive the import notification for the parent block.
Second issue is that `alice` was missing `--in-peers 0` and `--out-peers
0`, so alice was sometimes still fetching block via sync and the
assertion on the logs in zombienet would fail.
There is another potential issue that I saw once locally. We have a
failing pov-recovery queue that fails from time to time to check that
the retry mechanism does what it should. We now make sure that the same
candidate is never failed twice, so the tests become more predictable.
* Rework the event system of `sc-network` (#1370)
This commit introduces a new concept called `NotificationService` which
allows Polkadot protocols to communicate with the underlying
notification protocol implementation directly, without routing events
through `NetworkWorker`. This implies that each protocol has its own
service which it uses to communicate with remote peers and that each
`NotificationService` is unique with respect to the underlying
notification protocol, meaning `NotificationService` for the transaction
protocol can only be used to send and receive transaction-related
notifications.
The `NotificationService` concept introduces two additional benefits:
* allow protocols to start using custom handshakes
* allow protocols to accept/reject inbound peers
Previously the validation of inbound connections was solely the
responsibility of `ProtocolController`. This caused issues with light
peers and `SyncingEngine` as `ProtocolController` would accept more
peers than `SyncingEngine` could accept which caused peers to have
differing views of their own states. `SyncingEngine` would reject excess
peers but these rejections were not properly communicated to those peers
causing them to assume that they were accepted.
With `NotificationService`, the local handshake is not sent to remote
peer if peer is rejected which allows it to detect that it was rejected.
This commit also deprecates the use of `NetworkEventStream` for all
notification-related events and going forward only DHT events are
provided through `NetworkEventStream`. If protocols wish to follow each
other's events, they must introduce additional abtractions, as is done
for GRANDPA and transactions protocols by following the syncing protocol
through `SyncEventStream`.
Fixes https://github.com/paritytech/polkadot-sdk/issues/512
Fixes https://github.com/paritytech/polkadot-sdk/issues/514
Fixes https://github.com/paritytech/polkadot-sdk/issues/515
Fixes https://github.com/paritytech/polkadot-sdk/issues/554
Fixes https://github.com/paritytech/polkadot-sdk/issues/556
---
These changes are transferred from
https://github.com/paritytech/substrate/pull/14197 but there are no
functional changes compared to that PR
---------
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Alexandru Vasile <60601340+lexnv@users.noreply.github.com>
* [ci] Run gitspiegel trigger with merge conflicts (#2531)
Currently gitspiegel trigger won't run if there is merge conflict. This
PR fixes it.
close https://github.com/paritytech/gitspiegel/issues/183
* Remove long deprecated `AllPalletsWithoutSystemReversed` (#2509)
Remove deprecated `AllPalletsXY` types.
They have been deprecated for nearly 1.5 years now, I think its fine to
remove them.
If anyone feels like we should first put a date on the deprecation as
stated in the deprecation guideline, feel free to speak up. To me it
looks like this has been forgotten and can be directly removed.
* Remove `dmp_queue` pallet from Westend SP runtimes (#2516)
Westend SP dmp queue pallet removal is complete.
<img width="1499" alt="Screenshot 2023-11-28 at 08 31 27"
src="https://github.com/paritytech/polkadot-sdk/assets/16665596/906246fb-3de9-4133-a827-431636a097ad">
<img width="1499" alt="Screenshot 2023-11-28 at 08 32 08"
src="https://github.com/paritytech/polkadot-sdk/assets/16665596/bde84891-b044-42c7-9a0b-59125cd24db1">
<img width="1499" alt="Screenshot 2023-11-28 at 08 31 45"
src="https://github.com/paritytech/polkadot-sdk/assets/16665596/38337484-0856-45c0-b9ff-8c785bc3c0e3">
* Enable parallel key scraping (#1985)
closes #174
---------
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* substrate-node: `NativeElseWasmExecutor` is no longer used (#2521)
This PR removes `NativeElseWasmExecutor` usage from substrate node.
Instead [`WasmExecutor<(sp_io::SubstrateHostFunctions,
sp_statement_store::runtime_api::HostFunctions)>`](https://github.com/paritytech/polkadot-sdk/blob/49a41ab3bb3f630c20e5b24cec8d92382404631c/substrate/bin/node/executor/src/lib.rs#L26)
is used.
Related to #2358.
---------
Co-authored-by: Davide Galassi <davxy@datawok.net>
* Remove system parachains Polkadot and Kusama runtimes (#1737)
Since the Polkadot and Kusama runtimes are no longer in the repo, the
relevant systems parachains runtimes also need to be removed. More
context [here](https://github.com/paritytech/polkadot-sdk/issues/603)
and [here](https://github.com/paritytech/polkadot-sdk/pull/1731).
Removes the following:
- `asset-hub-kusama` and `asset-hub-polkadot`
- `bridge-hub-kusama` and `bridge-hub-polkadot`
- `collectives-polkadot`
- `glutton-kusama`
Partially solves #603 and adds to #1731.
* Improve `CodeExecutor` (#2358)
Since `sp-state-machine` and `GenesisConfigBuilderRuntimeCaller` always
set `use_native` to be false.
We should remove this param and make `NativeElseWasmExecutor` behave
like its name.
It could make the above components use the correct execution strategy.
Maybe polkadot do not need about `NativeElseWasmExecutor` anymore. But
it is still needed by other chains and it's useful for debugging.
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: command-bot <>
Co-authored-by: Michal Kucharczyk <1728078+michalkucharczyk@users.noreply.github.com>
* add Rotko common good parachain nodes (#2533)
rotko networks parachain bootnodes
```
# array of commands for testing
parachains=(
"./polkadot-parachain --chain asset-hub-polkadot --reserved-only --reserved-nodes /dns/mint14.rotko.net/tcp/33514/p2p/12D3KooWKkzLjYF6M5eEs7nYiqEtRqY8SGVouoCwo3nCWsRnThDW --no-hardware-benchmarks"
"./polkadot-parachain --chain asset-hub-polkadot --reserved-only --reserved-nodes /dns/mint14.rotko.net/tcp/34514/ws/p2p/12D3KooWKkzLjYF6M5eEs7nYiqEtRqY8SGVouoCwo3nCWsRnThDW --no-hardware-benchmarks"
"./polkadot-parachain --chain asset-hub-polkadot --reserved-only --reserved-nodes /dns/mint14.rotko.net/tcp/35514/wss/p2p/12D3KooWKkzLjYF6M5eEs7nYiqEtRqY8SGVouoCwo3nCWsRnThDW --no-hardware-benchmarks"
"./polkadot-parachain --chain asset-hub-kusama --reserved-only --reserved-nodes /dns/mine14.rotko.net/tcp/33524/p2p/12D3KooWJUFnjR2PNbsJhudwPVaWCoZy1acPGKjM2cSuGj345BBu --no-hardware-benchmarks"
"./polkadot-parachain --chain asset-hub-kusama --reserved-only --reserved-nodes /dns/mine14.rotko.net/tcp/34524/ws/p2p/12D3KooWJUFnjR2PNbsJhudwPVaWCoZy1acPGKjM2cSuGj345BBu --no-hardware-benchmarks"
"./polkadot-parachain --chain asset-hub-kusama --reserved-only --reserved-nodes /dns/mine14.rotko.net/tcp/35524/wss/p2p/12D3KooWJUFnjR2PNbsJhudwPVaWCoZy1acPGKjM2cSuGj345BBu --no-hardware-benchmarks"
"./polkadot-parachain --chain asset-hub-westend --reserved-only --reserved-nodes /dns/wmint14.rotko.net/tcp/33534/p2p/12D3KooWE4UDXqgtTcMCyUQ8S4uvaT8VMzzTBA6NWmKuYwTacWuN --no-hardware-benchmarks"
"./polkadot-parachain --chain asset-hub-westend --reserved-only --reserved-nodes /dns/wmint14.rotko.net/tcp/34534/ws/p2p/12D3KooWE4UDXqgtTcMCyUQ8S4uvaT8VMzzTBA6NWmKuYwTacWuN --no-hardware-benchmarks"
"./polkadot-parachain --chain asset-hub-westend --reserved-only --reserved-nodes /dns/wmint14.rotko.net/tcp/35534/wss/p2p/12D3KooWE4UDXqgtTcMCyUQ8S4uvaT8VMzzTBA6NWmKuYwTacWuN --no-hardware-benchmarks"
"./polkadot-parachain --chain bridge-hub-polkadot --reserved-only --reserved-nodes /dns/pbr13.rotko.net/tcp/33543/p2p/12D3KooWMxZY7tDc2Rh454VaJJ7RexKAXVS6xSBEvTnXSGCnuGDw --no-hardware-benchmarks"
"./polkadot-parachain --chain bridge-hub-polkadot --reserved-only --reserved-nodes /dns/pbr13.rotko.net/tcp/34543/ws/p2p/12D3KooWMxZY7tDc2Rh454VaJJ7RexKAXVS6xSBEvTnXSGCnuGDw --no-hardware-benchmarks"
"./polkadot-parachain --chain bridge-hub-polkadot --reserved-only --reserved-nodes /dns/pbr13.rotko.net/tcp/35543/wss/p2p/12D3KooWMxZY7tDc2Rh454VaJJ7RexKAXVS6xSBEvTnXSGCnuGDw --no-hardware-benchmarks"
"./polkadot-parachain --chain bridge-hub-kusama --reserved-only --reserved-nodes /dns/kbr13.rotko.net/tcp/33553/p2p/12D3KooWAmBp54mUEYtvsk2kxNEsDbAvdUMcaghxKXgUQxmPEQ66 --no-hardware-benchmarks"
"./polkadot-parachain --chain bridge-hub-kusama --reserved-only --reserved-nodes /dns/kbr13.rotko.net/tcp/34553/ws/p2p/12D3KooWAmBp54mUEYtvsk2kxNEsDbAvdUMcaghxKXgUQxmPEQ66 --no-hardware-benchmarks"
"./polkadot-parachain --chain bridge-hub-kusama --reserved-only --reserved-nodes /dns/kbr13.rotko.net/tcp/35553/wss/p2p/12D3KooWAmBp54mUEYtvsk2kxNEsDbAvdUMcaghxKXgUQxmPEQ66 --no-hardware-benchmarks"
"./polkadot-parachain --chain bridge-hub-westend --reserved-only --reserved-nodes /dns/wbr13.rotko.net/tcp/33563/p2p/12D3KooWJyeRHpxZZbfBCNEgeUFzmRC5AMSAs2tJhjJS1k5hULkD --no-hardware-benchmarks"
"./polkadot-parachain --chain bridge-hub-westend --reserved-only --reserved-nodes /dns/wbr13.rotko.net/tcp/34563/ws/p2p/12D3KooWJyeRHpxZZbfBCNEgeUFzmRC5AMSAs2tJhjJS1k5hULkD --no-hardware-benchmarks"
"./polkadot-parachain --chain bridge-hub-westend --reserved-only --reserved-nodes /dns/wbr13.rotko.net/tcp/35563/wss/p2p/12D3KooWJyeRHpxZZbfBCNEgeUFzmRC5AMSAs2tJhjJS1k5hULkD --no-hardware-benchmarks"
"./polkadot-parachain --chain collectives-polkadot --reserved-only --reserved-nodes /dns/pch13.rotko.net/tcp/33573/wss/p2p/12D3KooWRXudHoazPZ9osMfdY38e8CBxQLD4RhrVeHpRSNNpcDtH --no-hardware-benchmarks"
"./polkadot-parachain --chain collectives-polkadot --reserved-only --reserved-nodes /dns/pch13.rotko.net/tcp/34573/wss/p2p/12D3KooWRXudHoazPZ9osMfdY38e8CBxQLD4RhrVeHpRSNNpcDtH --no-hardware-benchmarks"
"./polkadot-parachain --chain collectives-polkadot --reserved-only --reserved-nodes /dns/pch13.rotko.net/tcp/35573/wss/p2p/12D3KooWRXudHoazPZ9osMfdY38e8CBxQLD4RhrVeHpRSNNpcDtH --no-hardware-benchmarks"
"./polkadot-parachain --chain collectives-westend --reserved-only --reserved-nodes /dns/wch13.rotko.net/tcp/33593/p2p/12D3KooWPG85zhuSRoyptjLkFD4iJFistjiBmc15JgQ96B4fdXYr --no-hardware-benchmarks"
"./polkadot-parachain --chain collectives-westend --reserved-only --reserved-nodes /dns/wch13.rotko.net/tcp/34593/ws/p2p/12D3KooWPG85zhuSRoyptjLkFD4iJFistjiBmc15JgQ96B4fdXYr --no-hardware-benchmarks"
"./polkadot-parachain --chain collectives-westend --reserved-only --reserved-nodes /dns/wch13.rotko.net/tcp/35593/wss/p2p/12D3KooWPG85zhuSRoyptjLkFD4iJFistjiBmc15JgQ96B4fdXYr --no-hardware-benchmarks"
)
```
* Bump fs4 from 0.6.6 to 0.7.0 (#1844)
* ParachainHost: No need to be generic over the block or hash type (#2537)
The `BlockNumber` and `Hash` are fixed types any way.
* Adding LuckyFriday's Bootnodes per IBP Application (#2538)
Good day,
This PR requests the inclusion of two bootnode entries for Polkadot,
Kusama and Westend as part of LuckyFriday's IBP application. The nodes
are hosted on self-owned hardware in a co-located facility. We've
undertaken connectivity tests ourselves and also from members of the
IBP.
The test commands used are as follows:
```
polkadot --chain westend --base-path /tmp/node --name "Boot" --reserved-only --reserved-nodes "/dns/ibp-boot-westend.luckyfriday.io/tcp/30334/wss/p2p/12D3KooWDg1YEytdwFFNWroFj6gio4YFsMB3miSbHKgdpJteUMB9" --no-hardware-benchmarks
polkadot --chain westend --base-path /tmp/node --name "Boot" --reserved-only --reserved-nodes "/dns/ibp-boot-westend.luckyfriday.io/tcp/30333/p2p/12D3KooWDg1YEytdwFFNWroFj6gio4YFsMB3miSbHKgdpJteUMB9" --no-hardware-benchmarks
polkadot --chain kusama --base-path /tmp/node --name "Boot" --reserved-only --reserved-nodes "/dns/ibp-boot-kusama.luckyfriday.io/tcp/30334/wss/p2p/12D3KooW9vu1GWHBuxyhm7rZgD3fhGZpNajPXFexadvhujWMgwfT" --no-hardware-benchmarks
polkadot --chain kusama --base-path /tmp/node --name "Boot" --reserved-only --reserved-nodes "/dns/ibp-boot-kusama.luckyfriday.io/tcp/30333/p2p/12D3KooW9vu1GWHBuxyhm7rZgD3fhGZpNajPXFexadvhujWMgwfT" --no-hardware-benchmarks
polkadot --chain polkadot --base-path /tmp/node --name "Boot" --reserved-only --reserved-nodes "/dns/ibp-boot-polkadot.luckyfriday.io/tcp/30334/wss/p2p/12D3KooWEjk6QXrZJ26fLpaajisJGHiz6WiQsR8k7mkM9GmWKnRZ" --no-hardware-benchmarks
polkadot --chain polkadot --base-path /tmp/node --name "Boot" --reserved-only --reserved-nodes "/dns/ibp-boot-polkadot.luckyfriday.io/tcp/30333/p2p/12D3KooWEjk6QXrZJ26fLpaajisJGHiz6WiQsR8k7mkM9GmWKnRZ" --no-hardware-benchmarks
```
All tests yielded syncing with 1 peer, a positive result. We have also
backed up our node-key in the event that restoration is required.
I hope that the aforementioned meets the requirement for inclusion and
look forward to a speedy turnaround.
Kind Regards,
Will | Paradox
* sp-api: Sprinkle some `automatically_derived` attributes
This attribute is informing tooling that the code is automatically
derived and thus, should not enable any linting.
* Disable trace-level logging from the `test-linux-stable-int` (#2546)
* chainHead: Backport error codes from spec (#2539)
This PR backports the error codes from the spec.
This relies on two specs for defining the error codes:
- Our rpc-spec-v2 https://github.com/paritytech/json-rpc-interface-spec.
- JSON-RPC spec https://www.jsonrpc.org/specification#error_object.
To better describe the error codes, they are divided into two separate
modules `rpc_spec_v2` and `json_rpc_spec` respectively.
The `InvalidSubscriptionID` and `FetchBlockHeader` are merged into the
JSON-RPC spec `INTERNAL_ERROR`.
While the other error codes are adjusted from spec.
Errors that are currently in use:
- -32801 block hash not reported by chainHead_follow or block hash has
been unpinned
- -32802 chainHead_follow started with withRuntime == false
- -32803 chainHead_follow did not generate an
operationWaitingForContinue event
The following are errors defined in the [JSON-RPC
spec](https://www.jsonrpc.org/specification#error_object):
- -32602 The provided parameter isn't one of the expected values, has
different format or is missing
- -32603 Internal server error
Note: Error `-32801` must be introduced and generated by the outstanding
https://github.com/paritytech/polkadot-sdk/issues/1505
Closes: https://github.com/paritytech/polkadot-sdk/issues/2530
---------
Signed-off-by: Alexandru Vasile <alexandru.vasile@parity.io>
* state-db: log_target usage fixed (#2547)
Use `LOG_TARGET/LOG_TARGET_PIN` in logs.
* Parachain Template: Prune `AuxStore` bound and corresponding crate dependency (#2303)
This small PR removes an unnecessary trait bound to the `AuxStore` trait
from the Parachain template's `rpc.rs` file.
With that bound removed, the entire dependency on `sc-client-api` can
also be removed.
---------
Co-authored-by: Joshy Orndorff <git-user-email.h0ly5@simplelogin.com>
Co-authored-by: Bastian Köcher <git@kchr.de>
* Contracts: use compiled rust tests (#2347)
see #2189
This PR does the following:
- Bring the user api functions into a new pallet-contracts-uapi (They
are currently defined in ink!
[here])(https://github.com/paritytech/ink/blob/master/crates/env/src/engine/on_chain/ext.rs)
- Add older api versions and unstable to the user api trait.
- Remove pallet-contracts-primitives and bring the types it defined in
uapi / pallet-contracts
- Add the infrastructure to build fixtures from Rust files and test it
works by replacing `dummy.wat` and `call.wat`
- Move all the doc from wasm/runtime.rs to pallet-contracts-uapi.
This will be done in a follow up:
- convert the rest of the test from .wat to rust
- bring risc-v uapi up to date with wasm
- finalize the uapi host fns, making sure everything is codegen from the
source host fns in pallet-contracts
---------
Co-authored-by: Alexander Theißen <alex.theissen@me.com>
* upgraded review bot to 2.3.0 (#2549)
Upgraded to version 2.3.0 which includes:
- paritytech/review-bot#103
- paritytech/review-bot#102
* Register metrics for the notification handles (#2562)
Add metrics for notification handles so substream events are correctly
reported to Prometheus
* Introduce Polkadot-Sdk `developer_hub` (#2102)
This PR introduces the new crate `developer_hub` into the polkadot-sdk
repo. The vision for the developer-hub crate is detailed in [this
document](https://docs.google.com/document/d/1XLLkFNE8v8HLvZpI2rzsa8N2IN1FcKntc8q-Sc4xBAk/edit?usp=sharing).
<img width="1128" alt="Screenshot 2023-11-02 at 10 45 48"
src="https://github.com/paritytech/polkadot-sdk/assets/5588131/1e12b60f-fef5-42c4-8503-a3ba234077c3">
Other than adding the new crate, it also does the following:
* Remove the `substrate` crate, as there is now a unique umbrella crate
for multiple things in `developer_hub::polkadot_sdk`.
* (backport candidate) A minor change to `frame-support` macros that
allows `T::RuntimeOrigin` to also be acceptable as the origin type.
* (backport candidate) A minor change to `frame-system` that allows us
to deposit events at genesis because now the real genesis config is
generated via wasm, and we can safely assume `cfg!(feature = "std")`
means only testing. related to #62.
* (backport candidate) Introduces a small `read_events_for_pallet` to
`frame_system` for easier event reading in tests.
* From https://github.com/paritytech/polkadot-sdk-docs/issues/31, it
takes action on improving the `pallet::call` docs.
* From https://github.com/paritytech/polkadot-sdk-docs/issues/31, it
takes action on improving the `UncheckedExtrinsic` docs.
## Way Forward
First, a version of this is deployed temporarily
[here](https://blog.kianenigma.nl/polkadot-sdk/developer_hub/index.html).
I will keep it up to date on a daily basis.
### This Pull Request
I see two ways forward:
1. We acknowledge that everything in `developer-hub` is going to be WIP,
and merge this asap. We should not yet use links to this crate anywhere.
2. We make this be the feature branch, make PRs against this, and either
gradually backport it, or only merge to master once it is done.
I am personally in favor of option 1. If we stick to option 2, we need a
better way to deploy a staging version of this to gh-pages.
### Issue Tracking
The main issues related to the future of `developer_hub` are:
- https://github.com/paritytech/polkadot-sdk-docs/issues/31
- https://github.com/paritytech/polkadot-sdk-docs/issues/4
- https://github.com/paritytech/polkadot-sdk-docs/issues/26
- https://github.com/paritytech/polkadot-sdk-docs/issues/32
- https://github.com/paritytech/polkadot-sdk-docs/issues/36
### After This Pull Request
- [ ] create a redirect for
https://paritytech.github.io/polkadot-sdk/master/substrate/
- [x] analy…
claravanstaden
added a commit
to Snowfork/polkadot-sdk
that referenced
this issue
Dec 6, 2023
* [ci] Enable zombienet jobs in PRs (#2361)
Since preparation for the merge queues needs more time I'm enabling
zombienet jobs in PRs CI back.
* westend: remove SessionKeys migration already applied on-chain (#2363)
Westend now successfully updated to `spec: 103000`, we **have to
remove** the session keys migration before the next release as it
doesn't gracefully handle reapplying it.
* implementers-guide: update github link (#2368)
cc @joepetrowski
* Fix Typo: `PalletXcmExtrinsicsBenchmark` (#2354)
Missed in https://github.com/paritytech/polkadot-sdk/pull/1672
* add pallet nomination-pools versioned migration to kitchensink (#2167)
The versioned migrations are already there in pallet nomination-pools:
https://github.com/paritytech/polkadot-sdk/blob/f6ee4781f633f0f89598f7b230595afe401da8dc/substrate/frame/nomination-pools/src/migration.rs#L27-L48
Just updating the kitchensink runtime to point to them.
This is also nice because it points the dev to an example of how to use
`VersionedMigration`.
* fix typo (#2377)
* bump zombienet version `v1.3.80` (#2376)
New release includes logic to move all jobs to `spot instances`.
Thx!
* [NPoS] Check if staker is exposed in paged exposure storage entries (#2369)
Addresses a bug caused by
https://github.com/paritytech/polkadot-sdk/pull/1189. The changes are
still not released yet, so would like to push the fix soon so it can go
together with the release of the above PR.
`fast_unstake` checks if a staker is exposed in an era. However, this fn
is still returning whether the staker is exposed based on the old
storage item. This PR fixes that by looking in both old and new exposure
storages.
Also adds some integrity tests for paged exposures.
* Beefy: small fixes (#2378)
Related to #2285
- save the state of the BEEFY gadget after processing a finality proof.
We need this in order to avoid skipping blocks.
- avoid reprocessing the old state when not necessary
* crypto: `lazy_static` removed, light parser for address URI added (#2250)
The `lazy_static` package does not work well in `no-std`: it requires
`spin_no_std` feature, which also will propagate into `std` if enabled.
This is not what we want.
This PR provides simple address uri parser which allows to get rid of
_regex_ which was used to parse the address uri, what in turns allows to
remove lazy_static.
Three regular expressions
(`SS58_REGEX`,`SECRET_PHRASE_REGEX`,`JUNCTION_REGEX`) were replaced with
the parser which unifies all of them.
The new parser does not support Unicode, it is ASCII only.
Related to: #2044
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Koute <koute@users.noreply.github.com>
Co-authored-by: command-bot <>
* [trivial] asset-hubs runtimes: fix incorrect doc-comments (#2384)
Fix some incorrect doc-comments
* Do not panic if the `fdlimit` call to increase the file descriptor limit fails (#2155)
# Description
Sometimes changing file descriptor limits is not allowed, but there is
no need to crash the node if/when this happens. Since `fdlimit`'s author
decided to use panics instead of returning `Result`, we need to catch
it.
# Checklist
- [x] My PR includes a detailed description as outlined in the
"Description" section above
- [ ] My PR follows the [labeling requirements](CONTRIBUTING.md#Process)
of this project (at minimum one label for `T`
required)
- [ ] I have made corresponding changes to the documentation (if
applicable)
- [ ] I have added tests that prove my fix is effective or that my
feature works (if applicable)
---------
Co-authored-by: Koute <koute@users.noreply.github.com>
* Relax `force_default_xcm_version` for testnet system parachains (#2385)
This PR fixes two things:
- relax `force_default_xcm_version` for testnet system parachains (e.g.
BridgeHubWestend has now 2 and there is no way to change it to 3, so we
need to call `force_xcm_version(3)` for every parachain that it is
connected to, because we send XCMv3 messages)
- add `Storage` item to `PolkadotXcm` pallet definition (now we cannot
see storage items for `pallet_xcm` in PJS)
## TODO
- [ ] when merged open PR to `polkadot-fellows/runtimes` repo
* Make collator RPC mode non-experimental (#2381)
The `--relay-chain-rpc-urls` CLI flag has been available for a while
now. We have collators with this running and parachain teams are also
using it. It should be fine now to remove the experimental status.
* Fix migrations and add CI check for new system chains (#2336)
Westend Collectives migration CI check can be fixed once we have
https://github.com/paritytech/try-runtime-cli/pull/58, will open another
PR once it is available.
- [x] Remove deprecated `DmpQueue` pallet from Rococo Contracts, the
migration is complete
- [x] Fix Asset Hub Rococo storage versions
- [x] Add migration check CI for Asset Hub Rococo and Westend Bridge Hub
* Bump bandersnatch VRF revision (#2389)
Closes https://github.com/paritytech/polkadot-sdk/issues/2327
cc @burdges
* Bump secp256k1 from 0.24.3 to 0.28.0 (#2357)
Bumps [secp256k1](https://github.com/rust-bitcoin/rust-secp256k1) from
0.24.3 to 0.28.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/rust-bitcoin/rust-secp256k1/blob/master/CHANGELOG.md">secp256k1's
changelog</a>.</em></p>
<blockquote>
<h1>0.28.0 - 2023-10-23</h1>
<ul>
<li>Add bindings to the ElligatorSwift implementation <a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/627">#627</a></li>
<li>Depend on recent release of <code>bitcoin_hashes</code> v0.13.0 <a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/621">#621</a></li>
<li>Add a verify function to <code>PublicKey</code> <a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/618">#618</a></li>
<li>Add serialize function for schnorr::Signature <a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/607">#607</a></li>
<li>Bump MSRV to 1.48 <a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/595">#595</a></li>
<li>Remove implementations of <code>PartialEq</code>, <code>Eq</code>,
<code>PartialOrd</code>, <code>Ord</code>, and <code>Hash</code> from
the
<code>impl_array_newtype</code> macro. Users will now need to derive
these traits if they are wanted.</li>
</ul>
<h1>0.27.0 - 2023-03-15</h1>
<ul>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/588">Depend
on newly release <code>bitcoin_hashes</code> v0.12</a>.</li>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/578">Implement
<code>Debug</code> trait for <code>Scalar</code> type</a>.</li>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/582">Implement
<code>insecure-erase</code></a>.</li>
</ul>
<h1>0.26.0 - 2202-12-19</h1>
<ul>
<li>Update libsecp25k1 to v0.2.0</li>
</ul>
<h1>0.25.0 - 2022-12-07</h1>
<ul>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/548">Fix
soundness issue with <code>preallocated_gen_new</code></a></li>
<li>Update to <code>secp256k1-sys</code> <a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/549">v0.7.0</a></li>
<li>Use type system to <a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/483">improve
safety</a>.</li>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/490">Change
secp256k1-sys symbol names to 0_6_1</a>.</li>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/499">Introduce
<code>rustfmt</code></a> to the codebase.</li>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/507">Make
all raw pointer methods go through the CPtr trait</a>.</li>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/518">Make
comparison functions stable</a>.</li>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/512">Remove</a>
public constant <code>ONE_KEY</code> (consider using
<code>FromStr</code> as a replacement).</li>
</ul>
<h1>0.24.1 - 2022-10-25</h1>
<ul>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/issues/491">Fix
broken deserialization logic of <code>KeyPair</code></a> that previously
always panicked. After the patch deserialization only panics if neither
the <code>global-context</code> nor the <code>alloc</code> (default)
feature is active.</li>
</ul>
<h1>0.24.0 - 2022-07-20</h1>
<ul>
<li>Upgrade to new release of <a
href="https://github.com/rust-bitcoin/bitcoin_hashes/releases/tag/0.11.0">bitcoin_hashes</a>.</li>
</ul>
<h1>0.23.4 - 2022-07-14</h1>
<ul>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/474">Disable
automatic rerandomization of contexts under WASM</a></li>
</ul>
<h1>0.23.3 - 2022-06-29</h1>
<ul>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/465">Add
must_use for mut self key manipulation methods</a></li>
<li><a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/pull/466">Fix
fuzzing feature guard</a></li>
</ul>
<h1>0.23.2 - 2022-06-27</h1>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/rust-bitcoin/rust-secp256k1/commit/7de09c8050da12a13ef9ee3850597f69c887952d"><code>7de09c8</code></a>
Merge <a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/issues/256">rust-bitcoin/rust-secp256k1256</a>:
Tracking PR for release: `secp256k1 v0...</li>
<li><a
href="https://github.com/rust-bitcoin/rust-secp256k1/commit/3dc5b165401f249c01a88cec54061301cffd97a0"><code>3dc5b16</code></a>
Bump version to v0.28.0</li>
<li><a
href="https://github.com/rust-bitcoin/rust-secp256k1/commit/3aada83180beec2b9f5ab8e7b9280a5517d3bcde"><code>3aada83</code></a>
Merge <a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/issues/256">rust-bitcoin/rust-secp256k1256</a>:
Add bindings to the ElligatorSwift imp...</li>
<li><a
href="https://github.com/rust-bitcoin/rust-secp256k1/commit/39febcb866ce285d53052a3636602f04483aa710"><code>39febcb</code></a>
Create rust-bidings</li>
<li><a
href="https://github.com/rust-bitcoin/rust-secp256k1/commit/da4f67b274c3061717723a568cfb182e4e2e7cce"><code>da4f67b</code></a>
Merge <a
href="https://redirect.github.com/rust-bitcoin/rust-secp256k1/issues/256">rust-bitcoin/rust-secp256k1256</a>:
Update vendored lib secp256k1 to v0.4.0</li>
<li><a
href="https://github.com/rust-bitcoin/rust-secp256k1/commit/80b2a8d4aa6ffa72041d569eab2278cd8c1ace2a"><code>80b2a8d</code></a>
Update vendored libsecp to v0.4.0</li>
<li><a
href="https://github.com/rust-bitcoin/rust-secp256k1/commit/d2285c929a086276ce6d1670d795c49191e30c65"><code>d2285c9</code></a>
ci: Remove MIPS* from CI</li>
<li><a
href="https://github.com/rust-bitcoin/rust-secp256k1/commit/0d58f50d523b40a78de0b87146208e3ad338c8ba"><code>0d58f50</code></a>
ci: generalize grp in "illegal callback" test</li>
<li><a
href="https://github.com/rust-bitcoin/rust-secp256k1/commit/acf9ac13e9f8df84dd52d2f012cda7211a6af10c"><code>acf9ac1</code></a>
delete <code>test_manual_create_destroy</code> test</li>
<li><a
href="https://github.com/rust-bitcoin/rust-secp256k1/commit/04ce50891bb0d49be5355f5c0d82db70d7dda65a"><code>04ce508</code></a>
lib: fix bad unit test</li>
<li>Additional commits viewable in <a
href="https://github.com/rust-bitcoin/rust-secp256k1/compare/secp256k1-0.24.3...secp256k1-0.28.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions
</details>
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
* Preserve artifact cache unless stale (#1918)
Co-authored-by: Marcin S <marcin@realemail.net>
* Pools: Add `MaxUnbonding` to metadata (#2397)
* Bump docker/build-push-action from 5.0.0 to 5.1.0 (#2404)
Bumps
[docker/build-push-action](https://github.com/docker/build-push-action)
from 5.0.0 to 5.1.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/docker/build-push-action/releases">docker/build-push-action's
releases</a>.</em></p>
<blockquote>
<h2>v5.1.0</h2>
<ul>
<li>Add <code>annotations</code> input by <a
href="https://github.com/crazy-max"><code>@crazy-max</code></a> in <a
href="https://redirect.github.com/docker/build-push-action/pull/992">docker/build-push-action#992</a></li>
<li>Add <code>secret-envs</code> input by <a
href="https://github.com/elias-lundgren"><code>@elias-lundgren</code></a>
in <a
href="https://redirect.github.com/docker/build-push-action/pull/980">docker/build-push-action#980</a></li>
<li>Bump <code>@babel/traverse</code> from 7.17.3 to 7.23.2 in <a
href="https://redirect.github.com/docker/build-push-action/pull/991">docker/build-push-action#991</a></li>
<li>Bump <code>@docker/actions-toolkit</code> from 0.13.0-rc.1 to
0.14.0 in <a
href="https://redirect.github.com/docker/build-push-action/pull/990">docker/build-push-action#990</a>
<a
href="https://redirect.github.com/docker/build-push-action/pull/1006">docker/build-push-action#1006</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/docker/build-push-action/compare/v5.0.0...v5.1.0">https://github.com/docker/build-push-action/compare/v5.0.0...v5.1.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/docker/build-push-action/commit/4a13e500e55cf31b7a5d59a38ab2040ab0f42f56"><code>4a13e50</code></a>
Merge pull request <a
href="https://redirect.github.com/docker/build-push-action/issues/1006">#1006</a>
from docker/dependabot/npm_and_yarn/docker/actions-t...</li>
<li><a
href="https://github.com/docker/build-push-action/commit/74166686865cdc289a02f214871fb53447b73447"><code>7416668</code></a>
chore: update generated content</li>
<li><a
href="https://github.com/docker/build-push-action/commit/b4f76a5dc6a67282180eddc6d460f23bc97bfcbc"><code>b4f76a5</code></a>
chore(deps): Bump <code>@docker/actions-toolkit</code> from 0.13.0 to
0.14.0</li>
<li><a
href="https://github.com/docker/build-push-action/commit/b7feb766fae338d85274c87a9d0f24c09690dbe2"><code>b7feb76</code></a>
Merge pull request <a
href="https://redirect.github.com/docker/build-push-action/issues/1005">#1005</a>
from crazy-max/ci-inspect</li>
<li><a
href="https://github.com/docker/build-push-action/commit/fae8018297c67066fff64a6e9c319c86f89b8982"><code>fae8018</code></a>
ci: inspect sbom and provenance</li>
<li><a
href="https://github.com/docker/build-push-action/commit/b625868b13c3feb675cabbf9bfeb52ae94166606"><code>b625868</code></a>
Merge pull request <a
href="https://redirect.github.com/docker/build-push-action/issues/1004">#1004</a>
from crazy-max/ci-update-buildx</li>
<li><a
href="https://github.com/docker/build-push-action/commit/5193ef1da6ea0d66de97d22817c258b203ade96a"><code>5193ef1</code></a>
ci: update buildx to latest</li>
<li><a
href="https://github.com/docker/build-push-action/commit/d3afd779e409ac26db5374fb27fe4aae9f6adb42"><code>d3afd77</code></a>
Merge pull request <a
href="https://redirect.github.com/docker/build-push-action/issues/991">#991</a>
from docker/dependabot/npm_and_yarn/babel/traverse-7....</li>
<li><a
href="https://github.com/docker/build-push-action/commit/7a786bb2b9408f7f997564f677248fabd4b886d5"><code>7a786bb</code></a>
Merge pull request <a
href="https://redirect.github.com/docker/build-push-action/issues/992">#992</a>
from crazy-max/annotations</li>
<li><a
href="https://github.com/docker/build-push-action/commit/c66ae3adcfbf698ecd851c6bb782654a0c6ffcae"><code>c66ae3a</code></a>
chore: update generated content</li>
<li>Additional commits viewable in <a
href="https://github.com/docker/build-push-action/compare/0565240e2d4ab88bba5387d719585280857ece09...4a13e500e55cf31b7a5d59a38ab2040ab0f42f56">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* remove retry from backers on failed candidate validation (#2182)
Hey guys, as discussed I've changed the name to a more general one
`PvfExecKind`, is this good or too general?
Creating this as a draft, I still have to fix the tests.
Closes #1585
Kusama address: FkB6QEo8VnV3oifugNj5NeVG3Mvq1zFbrUu4P5YwRoe5mQN
---------
Co-authored-by: command-bot <>
Co-authored-by: Marcin S <marcin@realemail.net>
* bump zombienet version `v1.3.82` (#2396)
Includes:
- bump `pjs` modules versions
- re-enable test disable in
https://github.com/paritytech/polkadot-sdk/pull/2294
---------
Co-authored-by: Bastian Köcher <info@kchr.de>
* `chain-spec-builder`: cleanup (#2174)
This PR removes:
- `New`, `Generate`, `Edit` commands,
- `kitchensink` dependency
from the `chain-spec-builder` util.
New `convert-to-raw`, `update-code` commands were added.
Additionally renames the `runtime` command (which was added in #1256) to
`create`.
---------
Co-authored-by: Sebastian Kunert <skunert49@gmail.com>
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: command-bot <>
* Refactor `ValidationError` (#2406)
* Add output positional arg to undying-collator cli (#2375)
Follow up from https://github.com/paritytech/polkadot-sdk/pull/2370 to
add `output` positional argument to undying-collator.
cc @JoshOrndorff
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
* PVF worker: switch on seccomp networking restrictions (#2221)
* cumulus-consensus-common: block import: `delayed_best_block` flag added (#2001)
This PR adds the `delayed_best_block` flag to `ParachainBlockImport`. If
not set, the `params.fork_choice` is not updated (to
`ForkChoiceStrategy::Custom`) during the block import.
When `delayed_best_block` is set to `false` all parachain blocks on the
[longest
fork](https://github.com/paritytech/polkadot-sdk/blob/552be4800d9e4b480f79a300fc531783e04be099/substrate/client/service/src/client/client.rs#L708-L709)
will be notified as the best block, allowing transaction pool to be
updated with every imported block.
Otherwise imported blocks will not be notified as best blocks
(`fork_choice=ForkChoiceStrategy::Custom(false)`), and transaction pool
would be updated only with best block received from relay-chain.
Improvement for: #1202
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
* Different XCM builders, default one requires fee payment (#2253)
Adding on top of the new builder pattern for creating XCM programs, I'm
adding some more APIs:
```rust
let paying_fees: Xcm<()> = Xcm::builder() // Only allow paying for fees
.withdraw_asset() // First instruction has to load the holding register
.buy_execution() // Second instruction has to be `buy_execution`
.build();
let paying_fees_invalid: Xcm<()> = Xcm::builder()
.withdraw_asset()
.build(); // Invalid, need to pay for fees
let not_paying_fees: Xcm<()> = Xcm::builder_unpaid()
.unpaid_execution() // Needed
.withdraw_asset()
.deposit_asset()
.build();
let all_goes: Xcm<()> = Xcm::builder_unsafe() // You can do anything
.withdraw_asset()
.deposit_asset()
.build();
```
The invalid bits are because the methods don't even exist on the types
that you'd want to call them on.
---------
Co-authored-by: command-bot <>
* added action to pass review bot on merge queue (#2414)
This action will trigger when a merge queue is created and will add a
positive status check under the `review-bot` account, allowing the PR to
pass the required check for the merge.
---------
Co-authored-by: Chevdor <chevdor@users.noreply.github.com>
* Update tick collator for async backing (#1497)
This updates the tick runtime and polkadot-parachain collator to use
async backing.
* cumulus-test-service: block import fix (#2430)
This is follow-up for:
https://github.com/paritytech/polkadot-sdk/pull/2001
Block import queue for `test-parachain` (`cumulus-test-service`) shall
use delayed best block feature.
This should fixed broken zombienet tests.
* Deprecate `RewardDestination::Controller` (#2380)
Deprecates `RewardDestination::Controller` variant.
- [x] `RewardDestination::Controller` annotated with `#[deprecated]`.
- [x] `Controller` variant is now handled the same way as `Stash` in
`payout_stakers`.
- [x] `set_payee` errors if `RewardDestination::Controller` is provided.
- [x] Added `update_payee` call to lazily migrate
`RewardDestination::Controller` `Payee` storage entries to
`RewardDestination::Account(controller)` .
- [x] `payout_stakers_dead_controller` has been removed from benches &
weights - was not used.
- [x] Tests no longer use `RewardDestination::Controller`.
---------
Co-authored-by: command-bot <>
Co-authored-by: Gonçalo Pestana <g6pestana@gmail.com>
Co-authored-by: georgepisaltu <52418509+georgepisaltu@users.noreply.github.com>
* Revert docker images tag naming to <prnum-shortsha> (#2434)
Docker images from paritypr are also used in testnets. PR reverts docker
tags naming to a more convenient.
cc @PierreBesson
* Fixes import path in benchmark macro (#2437)
Fully-qualified path was not being used in benchmark macro for one of
the cases. This PR fixes this and removes the unnecessary import in a
couple of files, which I believe was done to fix this issue.
* PVF: Fix unshare "no such file or directory" error (#2426)
* Make TypeInfo for SkipCheckIfFeeless transparent, too (#2449)
The `SkipCheckifFeeless::IDENTIFIER` became transparent (ie was whatever
the inner signed ext was). This PR just makes the `TypeInfo` transparent
too, so that libraries that use said info to decode the data (ie subxt)
can behave identically whether or not the `SkipCheckifFeeless` wrapper
is used or not.
---------
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* work with additional key values (#1757)
Add the possibility to inject additional key-values in the
sproof-builder that generates the relay root that gets stored in
parachain-system.
Rationale: pallets that verify additional storage items (not those
verified by parachain-system) from the relay should be able to proof
against the relay root that gets stored in parachain-system. This PR
allows to create provide additional nibles that can later be used for
verifiability in other pallets
* polkadot-node-subsystems: `ChainApiBackend` added + `polkadot-debug` image version fixed (#2411)
The out-dated version (bad tag) of [polkadot
image](https://github.com/paritytech/polkadot-sdk/blob/ede4a362622dfa69eb167eaa876246b1289f4b41/.gitlab/pipeline/zombienet/cumulus.yml#L31)
([docker
info](https://hub.docker.com/layers/paritypr/polkadot-debug/master/images/sha256:adb1658052cf671b50c90d5cece5c7a131efa1a95978249bd5cb85a5ad654f7a?context=explore))
was used. This PR fixes this.
See also:
https://github.com/paritytech/polkadot-sdk/pull/2411#issuecomment-1822632724
Also adds an abstraction that allows asynchronous backends to be passed to `ChainApiSubsystem`
---------
Co-authored-by: Sebastian Kunert <skunert49@gmail.com>
* Remove `#[macro_use]` annotation from `mod service` in all nodes. (#2456)
This PR removes `#[macro_use]` from the service module in each of the
Substrate nodes in the repo.
* Parachain Template
* Polkadot Parachain
* Minimal Node
* Node Template
* Kitchen Sink Node
IDK why this annotation was present, maybe from when we had the
`new_partial!` macro?
---------
Co-authored-by: Joshy Orndorff <git-user-email.h0ly5@simplelogin.com>
* Add `on-chain-release-build` feature for Collectives Westend (#2463)
Collectives Westend is missing an `on-chain-release-build` feature flag.
* CI: Disable runtime upgrade spec name check on Westend Asset Hub and fix Staking pallet migration (#2447)
Westend Asset Hub currently failing because the spec name is being
changed next runtime upgrade
(https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4413125).
This also fixes an idempotency issue with a staking pallet migration.
Similar issues will be caught automatically now that we've also updated
to try-runtime-cli v0.5.0 which checks for idempotency issues.
This also enables try-state checks running in the CI.
* sp-api: Move macro related re-exports to `__private` (#2446)
This moves the macro related re-exports to `__private` to make it more
obvious for downstream users that they are using an internal api.
---------
Co-authored-by: command-bot <>
* Fix trait imports from sp-api (#2472)
Broken after #2446.
* Amend staking docs to account for state of controller deprecation (#2451)
Amends some staking pallet docs, and deprecation comment, to adjust to
the latest controller deprecation state.
Note, do we need the `README.md` file, which is a duplicate of the
pallet docs? Docs would be easier to maintain, and less ambiguity for
devs to refer to, if we had one source of truth in the generated pallet
docs.
* Make publish CI consistant and bump to v0.3.0 (#2453)
* pallet-xcm: ensure xcm outcome is always complete, revert effects otherwise (#2405)
On extrinsics/call, ensure local XCM execution is complete/successful.
Otherwise, fail the extrinsic so that state changes don't get committed
to the db.
Added regression tests that fail without the fix.
fixes #2237
---------
Co-authored-by: Adrian Catangiu <adrian@parity.io>
* pallet-staking: Converts all math operations to safe (#2435)
This PR converts unsafe math operations to safe in the staking pallet.
Closes https://github.com/paritytech/polkadot-sdk/issues/2431
---------
Co-authored-by: Ankan <10196091+Ank4n@users.noreply.github.com>
* Adapt test worker to profile flag (#2450)
closes #2194
cc @mrcnski
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
* Disable any peer connections for parachain nodes in pov-recovery zombienet test (#2475)
I noticed that this test broke at some point. The parachain nodes should
only acquire their blocks from the relay chain. But they were connecting
to their peers and started fetching blocks from there.
In this test I now take additional measures so we check that each nodes
really uses pov-recovery to get the blocks.
* Remove dmp-queue pallet from Rococo Asset Hub and Bridge Hub (#2483)
DMP queue migration is complete and the pallet should be removed to fix
the check runtime upgrade CI.
<img width="1501" alt="Screenshot 2023-11-24 at 16 05 37"
src="https://github.com/paritytech/polkadot-sdk/assets/16665596/ee1da6bb-2756-4423-8085-1e4c73553ad5">
<img width="1501" alt="Screenshot 2023-11-24 at 16 06 44"
src="https://github.com/paritytech/polkadot-sdk/assets/16665596/03f3e88f-aed8-4eaa-aab6-7998f72258be">
* relay-chain-consensus: set a fork_choice (#2462)
After #2001 the `fork_choice` strategy may remain uninitialized in the
block import pipeline which uses relay-chain verifier.
Refer to
https://github.com/paritytech/polkadot-sdk/pull/2430#issuecomment-1823979813
for some further discussion.
* Improve `UnpinHandleInner` debug (#2485)
Printing the `unpin_worker_sender` included the entire stacktrace and
that is a little bit too verbose.
* Derive `MaxEncodedLen` on `SlotDuration` (#2484)
# Description
Needed this in my code as part of the larger data structure.
---------
Co-authored-by: command-bot <>
* pallet-xcm: fix benchmarking (#2489)
Use non-zero weight limit in benchmarking `pallet_xcm::execute()` so the
given XCM actually executes.
* [NPoS] Use EraInfo to manipulate exposure in fast-unstake tests (#2459)
The FastUnstake pallet tests were previously directly modifying storage
items in the pallet-staking to alter exposure. However, due to the
introduction of the [new paged exposure
feature](https://github.com/paritytech/polkadot-sdk/pull/1189) these
tests were not testing against correct storage items. This issue
resulted in a bug that I didn't catch, which has been addressed in [this
fix](https://github.com/paritytech/polkadot-sdk/pull/2369).
This PR introduces a modification to how the pallet-fast-unstake handles
exposure. It now utilizes `pallet-staking::EraInfo` to set or mutate
Exposures.
* Remove `RuntimeApi` dependency on system parachain runtime code (#2455)
The last issue blocking the removal of the Polkadot and Kusama system
parachains from the repo in #1737 is the dependency on the runtime code
through the RuntimeApi in `polkadot-parachain`.
This PR introduces two fake runtimes to satisfy the build requirements
and changes the `new_partial` function to make it not be generic over
the runtimes.
The reason for the second runtime is the different Aura keys used in
Polkadot Asset Hub, as the impl for AuraApi depends on this type.
If this changes the `RuntimeApi` generic could be removed completely
from all functions in `services.rs` and and generic type parameters in
`services.rs` and specified as a concrete type to TFullClient`.
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
* Add missing workspace members (#2491)
The following members have been added:
```pre
cumulus/parachains/integration-tests/emulated/chains/parachains/testing/penpal
cumulus/parachains/testnets-common
polkadot/node/tracking-allocator
substrate/frame/examples/frame-crate
```
CI check can be added after
https://github.com/paritytech/pipeline-scripts/pull/105 is merged.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Bastian Köcher <git@kchr.de>
* bump zombienet version `v1.3.83` (#2492)
Include fix for `0002-parachains-upgrade-smoke-test` test.
* Do not pollute global base path with export genesis/wasm (#2487)
Otherwise the user may runs into weird errors if there is already a db.
* Zombienet: add polkadot-debug image publish as needs for cumulus tests (#2493)
Add `build-push-image-polkadot-debug` job to needs since we changed to
use the polkadot-debug image from the current branch for cumulus test
and we need to be sure that the image is ready. Fix issues like
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4481059
cc: @bkchr
Co-authored-by: Bastian Köcher <git@kchr.de>
* polkadot-parachain: one chain-spec for all (#2457)
This PR removes some `ChainSpec` types which are not necessary
(left-overs from #1256). Currently `ChainSpec` does not have to be
generic over the specific `RuntimeGenesisConfig`, it is enough to use
single type for all:
https://github.com/paritytech/polkadot-sdk/blob/9f787018857660440182142adc806954d7d07709/cumulus/polkadot-parachain/src/chain_spec/mod.rs#L53-L54
related to: https://github.com/paritytech/polkadot-sdk/issues/25
---------
Co-authored-by: command-bot <>
* Update documentation for SafeMode and TxPause Pallets (#2413)
# Description
Documentation for the TxPause and SafeMode pallets.
Based on reading and the notes from the following related PRs:
- https://github.com/paritytech/substrate/pull/12092
I believe this also completes the checklist to be able to close the
related PRs:
- Close #302
- Close #274
---------
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
* PVF: remove audit log access (#2461)
* New runtime `spec_version` format + backport of the bump to 1.4.0 (#2468)
## Overview
This PR aligns the `spec_version` formatting to the [recent
changes](https://github.com/polkadot-fellows/runtimes/pull/26/files#diff-efa4caeb17487ecb13d8f5eb7863c3241d84afa2e73fbf25909a2ca89df0f362R142)
made for the Polkadot/Kusama runtimes.
It also backports the latest version `v1.4.0` bumps as `1_004_000`.
## Details
During the switch from `v0.9` to `v1.x`, the format of the
`spec_version` was modified from: `(M)m_ppp` for a runtime considered on
version `M.m.pp`. For instance `0.9.42` had a `spec_version` of `9420`.
With the transition to `v1.x`, the format was changed to a bigger number
(still `u32`) formatted as `MM_mm_ppp` where `1.2.3` would be stored as
`01_02_003`.
This PR aligns the format with that has been introduced in the
fellowship repo: `MMM_mmm_ppp`.
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
* Zombienet tests - disputes on finalized blocks (#2184)
**Overview:**
Adding an extra malus variant focusing on disputing finalized blocks. It
will:
- wrap around approval-voting
- listen to `OverseerSignal::BlockFinalized` and when encountered start
a dispute for the `dispute_offset`th ancestor
- simply pass through all other messages and signals
Add zombienet tests testing various edgecases:
- disputing freshly finalized blocks
- disputing stale finalized blocks
- disputing eagerly pruned finalized blocks (might be separate PR)
**TODO:**
- [x] Register new malus variant
- [x] Simple pass through wrapper (approval-voting)
- [x] Simple network definition
- [x] Listen to block finalizations
- [x] Fetch ancestor hash
- [x] Fetch session index
- [x] Fetch candidate
- [x] Construct and send dispute message
- [x] zndsl test 1 checking that disputes on fresh finalizations resolve
valid Closes #1365
- [x] zndsl test 2 checking that disputes for too old finalized blocks
are not possible Closes #1364
- [ ] zndsl test 3 checking that disputes for candidates with eagerly
pruned relay parent state are handled correctly #1359 (deferred to a
separate PR)
- [x] Unit tests for new malus variant (testing cli etc)
- [x] Clean/streamline error handling
- [ ] ~~Ensure it tests properly on session boundaries~~
---------
Co-authored-by: Javier Viola <javier@parity.io>
Co-authored-by: Marcin S. <marcin@realemail.net>
Co-authored-by: Tsvetomir Dimitrov <tsvetomir@parity.io>
* Decomissioned PR-Custom-Review (#2503)
This PR decomissions
[`PR-Custom-Review`](https://github.com/paritytech/pr-custom-review) in
replacement for
[`Review-bot`](https://github.com/paritytech/review-bot).
* Build the standard library crates when building the runtimes (#2217)
Our executor currently only supports the WASM MVP feature set, however
nowadays when compiling WASM the Rust compiler has more features enabled
by default.
We do set the `-C target-cpu=mvp` flag to make sure that *our* code gets
compiled in a way that is compatible with our executor, however this
doesn't affect Rust's standard library crates (`std`, `core` and
`alloc`) which are by default precompiled and still can make use of
these extra features.
So in this PR we force the compiler to also compile the standard library
crates for us to make sure that they also only use the MVP features.
I've added the `WASM_BUILD_STD` environment variable which can be used
to disable this behavior if set to `0`.
Unfortunately this *will* slow down the compile times when building
runtimes, but there isn't much that we can do about that.
Fixes https://github.com/paritytech/polkadot-sdk/issues/1755
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
* asset-hub-westend-integration-tests: add more asset transfers tests (#2488)
Just adds more tests.
* Remove the timestamp handler (#2506)
* Staking: `chill_other` takes stash instead of controller (#2501)
The `chill_other` call is the only staking call that explicitly requires
`controller` in its signature. This PR changes the controller arg to be
the stash instead, with `StakingLedger` then fetching the controller
from storage.
This is not a breaking change per se - the call types do not change, but
is noteworthy as UIs will now want to pass the stash account into
`chill_other` calls, & metadata will reflect this.
Note: This is very low impact. `chill_other` has [hardly ever been
used](https://polkadot.subscan.io/extrinsic?address=&module=staking&call=chill_other&result=all&signedChecked=signed%20only&startDate=&endDate=&startBlock=&timeType=date&version=9431&endBlock=)
on Polkadot - notwithstanding the one called 11 days ago at block
18177457 that was a part of test I did, the last call was made 493 days
ago. Only 2 calls have ever been successful.
Addresses controller deprecation #2500
---------
Co-authored-by: command-bot <>
Co-authored-by: Gonçalo Pestana <g6pestana@gmail.com>
* CI: Fix `build-and-attach-release-runtimes.yml` (#2471)
Incorporate suggestion from release team to get this workflow working.
edit: worked on this test GH release:
https://github.com/paritytech/polkadot-sdk/releases/tag/liam-debug-ghw.
let's try it.
* Fixes cumulus README instructions (#2442)
README instructions fixes to be compatible with the `polkadot-prepare`
and `polkadot-execute` binary split.
* Pools: Add ability to configure commission claiming permissions (#2474)
Addresses #409.
This request has been raised by multiple community members - the ability
for the nomination pool root role to configure permissionless commission
claiming:
> Would it be possible to have a claim_commission_other extrinsic for
claiming commission of nomination pools permissionless?
This PR does not quite introduce this additional call, but amends
`do_claim_commission` to check a new `claim_permission` field in the
`Commission` struct, configured by an enum:
```
enum CommissionClaimPermission {
Permissionless,
Account(AccountId),
}
```
This can be optionally set in a bonded pool's
`commission.claim_permission` field:
```
struct BondedPool {
commission: {
<snip>
claim_permission: Option<CommissionClaimPermission<T::AccountId>>,
},
<snip>
}
```
This is a new field and requires a migration to add it to existing
pools. This will be `None` on pool creation, falling back to the `root`
role having sole access to claim commission if it is not set; this is
the behaviour as it is today. Once set, the field _can_ be set to `None`
again.
#### Changes
- [x] Add `commision.claim_permission` field.
- [x] Add `can_claim_commission` and amend `do_claim_commission`.
- [x] Add `set_commission_claim_permission` call.
- [x] Test to cover new configs and call.
- [x] Add and amend benchmarks.
- [x] Generate new weights + slot into call
`set_commission_claim_permission`.
- [x] Add migration to introduce `commission.claim_permission`, bump
storage version.
- [x] Update Westend weights.
- [x] Migration working.
---------
Co-authored-by: command-bot <>
* Added NetworkId::PolkadotBulletin variant (#2517)
We're going to bridge Polkadot Bridge Hub with [Polkadot Bulletin
chain](https://github.com/zdave-parity/polkadot-bulletin-chain) soon
(and Rococo Bridge Hub with 1:1 copy of Polkadot Bulletin chain even
sooner), so we need a variant for that chain in `NetworkId`. As
suggested, I'm adding a new variant for it to the `NetworkId` (we may
have used `ByGenesis(_)`, but decision was made to have a dedicated
variant for that).
* polkadot: disable block authoring backoff on production networks (#2510)
Currently the polkadot node will backoff from block authoring if
finality starts lagging. This PR disables this mechanism on production
networks (polkadot and kusama) and adds a flags to optionally force
enabling it.
* Set `frame_system::LastRuntimeUpgrade` after running `try-runtime` migrations (#2515)
Sets `frame_system::LastRuntimeUpgrade` after running try-runtime
migrations to better emulate real behavior.
This fixes an issue where migrations using the spec version to determine
whether to execute can incorrectly fail idempotency checks.
@s0me0ne-unkn0wn noticed this issue with the session key migration
introduced in https://github.com/paritytech/polkadot-sdk/pull/2265.
* Increase `cargo-check-each-crate-macos` timeout (#2519)
* Moves all test runtimes to use `derive_impl` (#2409)
Step in https://github.com/paritytech/polkadot-sdk/issues/171
This PR adds `derive_impl` on all `frame_system` config impls for mock
runtimes. The overridden configs are maintained as of now to ensure
minimal changes.
---------
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* PVF: Add test instructions (#2058)
* Remove `wasm-builder`'s README (#2525)
Followup of https://github.com/paritytech/polkadot-sdk/pull/2217
This PR deletes the README of the `wasm-builder` crate and moves its
docs back into the rustdoc, [as requested
here](https://github.com/paritytech/polkadot-sdk/pull/2217#discussion_r1406401175).
(:
* Remove `im-online` pallet from Rococo and Westend (#2265)
Co-authored-by: ordian <write@reusable.software>
Co-authored-by: Vladimir Istyufeev <vladimir@parity.io>
* polkadot: remove grandpa pause support (#2511)
This was never used and we probably don't need it anyway.
* Remove pov-recovery race condition/Improve zombienet test (#2526)
The test was a bit flaky on CI.
There was a race condition in the pov-recovery system. If the timing is
bad, it can happen that a block waits for a parent that is already
queued for import. The check if a block has children waiting happens
when we insert into the import queue. So we need to do an additional
check once we receive the import notification for the parent block.
Second issue is that `alice` was missing `--in-peers 0` and `--out-peers
0`, so alice was sometimes still fetching block via sync and the
assertion on the logs in zombienet would fail.
There is another potential issue that I saw once locally. We have a
failing pov-recovery queue that fails from time to time to check that
the retry mechanism does what it should. We now make sure that the same
candidate is never failed twice, so the tests become more predictable.
* Rework the event system of `sc-network` (#1370)
This commit introduces a new concept called `NotificationService` which
allows Polkadot protocols to communicate with the underlying
notification protocol implementation directly, without routing events
through `NetworkWorker`. This implies that each protocol has its own
service which it uses to communicate with remote peers and that each
`NotificationService` is unique with respect to the underlying
notification protocol, meaning `NotificationService` for the transaction
protocol can only be used to send and receive transaction-related
notifications.
The `NotificationService` concept introduces two additional benefits:
* allow protocols to start using custom handshakes
* allow protocols to accept/reject inbound peers
Previously the validation of inbound connections was solely the
responsibility of `ProtocolController`. This caused issues with light
peers and `SyncingEngine` as `ProtocolController` would accept more
peers than `SyncingEngine` could accept which caused peers to have
differing views of their own states. `SyncingEngine` would reject excess
peers but these rejections were not properly communicated to those peers
causing them to assume that they were accepted.
With `NotificationService`, the local handshake is not sent to remote
peer if peer is rejected which allows it to detect that it was rejected.
This commit also deprecates the use of `NetworkEventStream` for all
notification-related events and going forward only DHT events are
provided through `NetworkEventStream`. If protocols wish to follow each
other's events, they must introduce additional abtractions, as is done
for GRANDPA and transactions protocols by following the syncing protocol
through `SyncEventStream`.
Fixes https://github.com/paritytech/polkadot-sdk/issues/512
Fixes https://github.com/paritytech/polkadot-sdk/issues/514
Fixes https://github.com/paritytech/polkadot-sdk/issues/515
Fixes https://github.com/paritytech/polkadot-sdk/issues/554
Fixes https://github.com/paritytech/polkadot-sdk/issues/556
---
These changes are transferred from
https://github.com/paritytech/substrate/pull/14197 but there are no
functional changes compared to that PR
---------
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Alexandru Vasile <60601340+lexnv@users.noreply.github.com>
* [ci] Run gitspiegel trigger with merge conflicts (#2531)
Currently gitspiegel trigger won't run if there is merge conflict. This
PR fixes it.
close https://github.com/paritytech/gitspiegel/issues/183
* Remove long deprecated `AllPalletsWithoutSystemReversed` (#2509)
Remove deprecated `AllPalletsXY` types.
They have been deprecated for nearly 1.5 years now, I think its fine to
remove them.
If anyone feels like we should first put a date on the deprecation as
stated in the deprecation guideline, feel free to speak up. To me it
looks like this has been forgotten and can be directly removed.
* Remove `dmp_queue` pallet from Westend SP runtimes (#2516)
Westend SP dmp queue pallet removal is complete.
<img width="1499" alt="Screenshot 2023-11-28 at 08 31 27"
src="https://github.com/paritytech/polkadot-sdk/assets/16665596/906246fb-3de9-4133-a827-431636a097ad">
<img width="1499" alt="Screenshot 2023-11-28 at 08 32 08"
src="https://github.com/paritytech/polkadot-sdk/assets/16665596/bde84891-b044-42c7-9a0b-59125cd24db1">
<img width="1499" alt="Screenshot 2023-11-28 at 08 31 45"
src="https://github.com/paritytech/polkadot-sdk/assets/16665596/38337484-0856-45c0-b9ff-8c785bc3c0e3">
* Enable parallel key scraping (#1985)
closes #174
---------
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* substrate-node: `NativeElseWasmExecutor` is no longer used (#2521)
This PR removes `NativeElseWasmExecutor` usage from substrate node.
Instead [`WasmExecutor<(sp_io::SubstrateHostFunctions,
sp_statement_store::runtime_api::HostFunctions)>`](https://github.com/paritytech/polkadot-sdk/blob/49a41ab3bb3f630c20e5b24cec8d92382404631c/substrate/bin/node/executor/src/lib.rs#L26)
is used.
Related to #2358.
---------
Co-authored-by: Davide Galassi <davxy@datawok.net>
* Remove system parachains Polkadot and Kusama runtimes (#1737)
Since the Polkadot and Kusama runtimes are no longer in the repo, the
relevant systems parachains runtimes also need to be removed. More
context [here](https://github.com/paritytech/polkadot-sdk/issues/603)
and [here](https://github.com/paritytech/polkadot-sdk/pull/1731).
Removes the following:
- `asset-hub-kusama` and `asset-hub-polkadot`
- `bridge-hub-kusama` and `bridge-hub-polkadot`
- `collectives-polkadot`
- `glutton-kusama`
Partially solves #603 and adds to #1731.
* Improve `CodeExecutor` (#2358)
Since `sp-state-machine` and `GenesisConfigBuilderRuntimeCaller` always
set `use_native` to be false.
We should remove this param and make `NativeElseWasmExecutor` behave
like its name.
It could make the above components use the correct execution strategy.
Maybe polkadot do not need about `NativeElseWasmExecutor` anymore. But
it is still needed by other chains and it's useful for debugging.
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: command-bot <>
Co-authored-by: Michal Kucharczyk <1728078+michalkucharczyk@users.noreply.github.com>
* add Rotko common good parachain nodes (#2533)
rotko networks parachain bootnodes
```
# array of commands for testing
parachains=(
"./polkadot-parachain --chain asset-hub-polkadot --reserved-only --reserved-nodes /dns/mint14.rotko.net/tcp/33514/p2p/12D3KooWKkzLjYF6M5eEs7nYiqEtRqY8SGVouoCwo3nCWsRnThDW --no-hardware-benchmarks"
"./polkadot-parachain --chain asset-hub-polkadot --reserved-only --reserved-nodes /dns/mint14.rotko.net/tcp/34514/ws/p2p/12D3KooWKkzLjYF6M5eEs7nYiqEtRqY8SGVouoCwo3nCWsRnThDW --no-hardware-benchmarks"
"./polkadot-parachain --chain asset-hub-polkadot --reserved-only --reserved-nodes /dns/mint14.rotko.net/tcp/35514/wss/p2p/12D3KooWKkzLjYF6M5eEs7nYiqEtRqY8SGVouoCwo3nCWsRnThDW --no-hardware-benchmarks"
"./polkadot-parachain --chain asset-hub-kusama --reserved-only --reserved-nodes /dns/mine14.rotko.net/tcp/33524/p2p/12D3KooWJUFnjR2PNbsJhudwPVaWCoZy1acPGKjM2cSuGj345BBu --no-hardware-benchmarks"
"./polkadot-parachain --chain asset-hub-kusama --reserved-only --reserved-nodes /dns/mine14.rotko.net/tcp/34524/ws/p2p/12D3KooWJUFnjR2PNbsJhudwPVaWCoZy1acPGKjM2cSuGj345BBu --no-hardware-benchmarks"
"./polkadot-parachain --chain asset-hub-kusama --reserved-only --reserved-nodes /dns/mine14.rotko.net/tcp/35524/wss/p2p/12D3KooWJUFnjR2PNbsJhudwPVaWCoZy1acPGKjM2cSuGj345BBu --no-hardware-benchmarks"
"./polkadot-parachain --chain asset-hub-westend --reserved-only --reserved-nodes /dns/wmint14.rotko.net/tcp/33534/p2p/12D3KooWE4UDXqgtTcMCyUQ8S4uvaT8VMzzTBA6NWmKuYwTacWuN --no-hardware-benchmarks"
"./polkadot-parachain --chain asset-hub-westend --reserved-only --reserved-nodes /dns/wmint14.rotko.net/tcp/34534/ws/p2p/12D3KooWE4UDXqgtTcMCyUQ8S4uvaT8VMzzTBA6NWmKuYwTacWuN --no-hardware-benchmarks"
"./polkadot-parachain --chain asset-hub-westend --reserved-only --reserved-nodes /dns/wmint14.rotko.net/tcp/35534/wss/p2p/12D3KooWE4UDXqgtTcMCyUQ8S4uvaT8VMzzTBA6NWmKuYwTacWuN --no-hardware-benchmarks"
"./polkadot-parachain --chain bridge-hub-polkadot --reserved-only --reserved-nodes /dns/pbr13.rotko.net/tcp/33543/p2p/12D3KooWMxZY7tDc2Rh454VaJJ7RexKAXVS6xSBEvTnXSGCnuGDw --no-hardware-benchmarks"
"./polkadot-parachain --chain bridge-hub-polkadot --reserved-only --reserved-nodes /dns/pbr13.rotko.net/tcp/34543/ws/p2p/12D3KooWMxZY7tDc2Rh454VaJJ7RexKAXVS6xSBEvTnXSGCnuGDw --no-hardware-benchmarks"
"./polkadot-parachain --chain bridge-hub-polkadot --reserved-only --reserved-nodes /dns/pbr13.rotko.net/tcp/35543/wss/p2p/12D3KooWMxZY7tDc2Rh454VaJJ7RexKAXVS6xSBEvTnXSGCnuGDw --no-hardware-benchmarks"
"./polkadot-parachain --chain bridge-hub-kusama --reserved-only --reserved-nodes /dns/kbr13.rotko.net/tcp/33553/p2p/12D3KooWAmBp54mUEYtvsk2kxNEsDbAvdUMcaghxKXgUQxmPEQ66 --no-hardware-benchmarks"
"./polkadot-parachain --chain bridge-hub-kusama --reserved-only --reserved-nodes /dns/kbr13.rotko.net/tcp/34553/ws/p2p/12D3KooWAmBp54mUEYtvsk2kxNEsDbAvdUMcaghxKXgUQxmPEQ66 --no-hardware-benchmarks"
"./polkadot-parachain --chain bridge-hub-kusama --reserved-only --reserved-nodes /dns/kbr13.rotko.net/tcp/35553/wss/p2p/12D3KooWAmBp54mUEYtvsk2kxNEsDbAvdUMcaghxKXgUQxmPEQ66 --no-hardware-benchmarks"
"./polkadot-parachain --chain bridge-hub-westend --reserved-only --reserved-nodes /dns/wbr13.rotko.net/tcp/33563/p2p/12D3KooWJyeRHpxZZbfBCNEgeUFzmRC5AMSAs2tJhjJS1k5hULkD --no-hardware-benchmarks"
"./polkadot-parachain --chain bridge-hub-westend --reserved-only --reserved-nodes /dns/wbr13.rotko.net/tcp/34563/ws/p2p/12D3KooWJyeRHpxZZbfBCNEgeUFzmRC5AMSAs2tJhjJS1k5hULkD --no-hardware-benchmarks"
"./polkadot-parachain --chain bridge-hub-westend --reserved-only --reserved-nodes /dns/wbr13.rotko.net/tcp/35563/wss/p2p/12D3KooWJyeRHpxZZbfBCNEgeUFzmRC5AMSAs2tJhjJS1k5hULkD --no-hardware-benchmarks"
"./polkadot-parachain --chain collectives-polkadot --reserved-only --reserved-nodes /dns/pch13.rotko.net/tcp/33573/wss/p2p/12D3KooWRXudHoazPZ9osMfdY38e8CBxQLD4RhrVeHpRSNNpcDtH --no-hardware-benchmarks"
"./polkadot-parachain --chain collectives-polkadot --reserved-only --reserved-nodes /dns/pch13.rotko.net/tcp/34573/wss/p2p/12D3KooWRXudHoazPZ9osMfdY38e8CBxQLD4RhrVeHpRSNNpcDtH --no-hardware-benchmarks"
"./polkadot-parachain --chain collectives-polkadot --reserved-only --reserved-nodes /dns/pch13.rotko.net/tcp/35573/wss/p2p/12D3KooWRXudHoazPZ9osMfdY38e8CBxQLD4RhrVeHpRSNNpcDtH --no-hardware-benchmarks"
"./polkadot-parachain --chain collectives-westend --reserved-only --reserved-nodes /dns/wch13.rotko.net/tcp/33593/p2p/12D3KooWPG85zhuSRoyptjLkFD4iJFistjiBmc15JgQ96B4fdXYr --no-hardware-benchmarks"
"./polkadot-parachain --chain collectives-westend --reserved-only --reserved-nodes /dns/wch13.rotko.net/tcp/34593/ws/p2p/12D3KooWPG85zhuSRoyptjLkFD4iJFistjiBmc15JgQ96B4fdXYr --no-hardware-benchmarks"
"./polkadot-parachain --chain collectives-westend --reserved-only --reserved-nodes /dns/wch13.rotko.net/tcp/35593/wss/p2p/12D3KooWPG85zhuSRoyptjLkFD4iJFistjiBmc15JgQ96B4fdXYr --no-hardware-benchmarks"
)
```
* Bump fs4 from 0.6.6 to 0.7.0 (#1844)
* ParachainHost: No need to be generic over the block or hash type (#2537)
The `BlockNumber` and `Hash` are fixed types any way.
* Adding LuckyFriday's Bootnodes per IBP Application (#2538)
Good day,
This PR requests the inclusion of two bootnode entries for Polkadot,
Kusama and Westend as part of LuckyFriday's IBP application. The nodes
are hosted on self-owned hardware in a co-located facility. We've
undertaken connectivity tests ourselves and also from members of the
IBP.
The test commands used are as follows:
```
polkadot --chain westend --base-path /tmp/node --name "Boot" --reserved-only --reserved-nodes "/dns/ibp-boot-westend.luckyfriday.io/tcp/30334/wss/p2p/12D3KooWDg1YEytdwFFNWroFj6gio4YFsMB3miSbHKgdpJteUMB9" --no-hardware-benchmarks
polkadot --chain westend --base-path /tmp/node --name "Boot" --reserved-only --reserved-nodes "/dns/ibp-boot-westend.luckyfriday.io/tcp/30333/p2p/12D3KooWDg1YEytdwFFNWroFj6gio4YFsMB3miSbHKgdpJteUMB9" --no-hardware-benchmarks
polkadot --chain kusama --base-path /tmp/node --name "Boot" --reserved-only --reserved-nodes "/dns/ibp-boot-kusama.luckyfriday.io/tcp/30334/wss/p2p/12D3KooW9vu1GWHBuxyhm7rZgD3fhGZpNajPXFexadvhujWMgwfT" --no-hardware-benchmarks
polkadot --chain kusama --base-path /tmp/node --name "Boot" --reserved-only --reserved-nodes "/dns/ibp-boot-kusama.luckyfriday.io/tcp/30333/p2p/12D3KooW9vu1GWHBuxyhm7rZgD3fhGZpNajPXFexadvhujWMgwfT" --no-hardware-benchmarks
polkadot --chain polkadot --base-path /tmp/node --name "Boot" --reserved-only --reserved-nodes "/dns/ibp-boot-polkadot.luckyfriday.io/tcp/30334/wss/p2p/12D3KooWEjk6QXrZJ26fLpaajisJGHiz6WiQsR8k7mkM9GmWKnRZ" --no-hardware-benchmarks
polkadot --chain polkadot --base-path /tmp/node --name "Boot" --reserved-only --reserved-nodes "/dns/ibp-boot-polkadot.luckyfriday.io/tcp/30333/p2p/12D3KooWEjk6QXrZJ26fLpaajisJGHiz6WiQsR8k7mkM9GmWKnRZ" --no-hardware-benchmarks
```
All tests yielded syncing with 1 peer, a positive result. We have also
backed up our node-key in the event that restoration is required.
I hope that the aforementioned meets the requirement for inclusion and
look forward to a speedy turnaround.
Kind Regards,
Will | Paradox
* sp-api: Sprinkle some `automatically_derived` attributes
This attribute is informing tooling that the code is automatically
derived and thus, should not enable any linting.
* Disable trace-level logging from the `test-linux-stable-int` (#2546)
* chainHead: Backport error codes from spec (#2539)
This PR backports the error codes from the spec.
This relies on two specs for defining the error codes:
- Our rpc-spec-v2 https://github.com/paritytech/json-rpc-interface-spec.
- JSON-RPC spec https://www.jsonrpc.org/specification#error_object.
To better describe the error codes, they are divided into two separate
modules `rpc_spec_v2` and `json_rpc_spec` respectively.
The `InvalidSubscriptionID` and `FetchBlockHeader` are merged into the
JSON-RPC spec `INTERNAL_ERROR`.
While the other error codes are adjusted from spec.
Errors that are currently in use:
- -32801 block hash not reported by chainHead_follow or block hash has
been unpinned
- -32802 chainHead_follow started with withRuntime == false
- -32803 chainHead_follow did not generate an
operationWaitingForContinue event
The following are errors defined in the [JSON-RPC
spec](https://www.jsonrpc.org/specification#error_object):
- -32602 The provided parameter isn't one of the expected values, has
different format or is missing
- -32603 Internal server error
Note: Error `-32801` must be introduced and generated by the outstanding
https://github.com/paritytech/polkadot-sdk/issues/1505
Closes: https://github.com/paritytech/polkadot-sdk/issues/2530
---------
Signed-off-by: Alexandru Vasile <alexandru.vasile@parity.io>
* state-db: log_target usage fixed (#2547)
Use `LOG_TARGET/LOG_TARGET_PIN` in logs.
* Parachain Template: Prune `AuxStore` bound and corresponding crate dependency (#2303)
This small PR removes an unnecessary trait bound to the `AuxStore` trait
from the Parachain template's `rpc.rs` file.
With that bound removed, the entire dependency on `sc-client-api` can
also be removed.
---------
Co-authored-by: Joshy Orndorff <git-user-email.h0ly5@simplelogin.com>
Co-authored-by: Bastian Köcher <git@kchr.de>
* Contracts: use compiled rust tests (#2347)
see #2189
This PR does the following:
- Bring the user api functions into a new pallet-contracts-uapi (They
are currently defined in ink!
[here])(https://github.com/paritytech/ink/blob/master/crates/env/src/engine/on_chain/ext.rs)
- Add older api versions and unstable to the user api trait.
- Remove pallet-contracts-primitives and bring the types it defined in
uapi / pallet-contracts
- Add the infrastructure to build fixtures from Rust files and test it
works by replacing `dummy.wat` and `call.wat`
- Move all the doc from wasm/runtime.rs to pallet-contracts-uapi.
This will be done in a follow up:
- convert the rest of the test from .wat to rust
- bring risc-v uapi up to date with wasm
- finalize the uapi host fns, making sure everything is codegen from the
source host fns in pallet-contracts
---------
Co-authored-by: Alexander Theißen <alex.theissen@me.com>
* upgraded review bot to 2.3.0 (#2549)
Upgraded to version 2.3.0 which includes:
- paritytech/review-bot#103
- paritytech/review-bot#102
* Register metrics for the notification handles (#2562)
Add metrics for notification handles so substream events are correctly
reported to Prometheus
* Introduce Polkadot-Sdk `developer_hub` (#2102)
This PR introduces the new crate `developer_hub` into the polkadot-sdk
repo. The vision for the developer-hub crate is detailed in [this
document](https://docs.google.com/document/d/1XLLkFNE8v8HLvZpI2rzsa8N2IN1FcKntc8q-Sc4xBAk/edit?usp=sharing).
<img width="1128" alt="Screenshot 2023-11-02 at 10 45 48"
src="https://github.com/paritytech/polkadot-sdk/assets/5588131/1e12b60f-fef5-42c4-8503-a3ba234077c3">
Other than adding the new crate, it also does the following:
* Remove the `substrate` crate, as there is now a unique umbrella crate
for multiple things in `developer_hub::polkadot_sdk`.
* (backport candidate) A minor change to `frame-support` macros that
allows `T::RuntimeOrigin` to also be acceptable as the origin type.
* (backport candidate) A minor change to `frame-system` that allows us
to deposit events at genesis because now the real genesis config is
generated via wasm, and we can safely assume `cfg!(feature = "std")`
means only testing. related to #62.
* (backport candidate) Introduces a small `read_events_for_pallet` to
`frame_system` for easier event reading in tests.
* From https://github.com/paritytech/polkadot-sdk-docs/issues/31, it
takes action on improving the `pallet::call` docs.
* From https://github.com/paritytech/polkadot-sdk-docs/issues/31, it
takes action on improving the `UncheckedExtrinsic` docs.
## Way Forward
First, a version of this is deployed temporarily
[here](https://blog.kianenigma.nl/polkadot-sdk/developer_hub/index.html).
I will keep it up to date on a daily basis.
### This Pull Request
I see two ways forward:
1. We acknowledge that everything in `developer-hub` is going to be WIP,
and merge this asap. We should not yet use links to this crate anywhere.
2. We make this be the feature branch, make PRs against this, and either
gradually backport it, or only merge to master once it is done.
I am personally in favor of option 1. If we stick to option 2, we need a
better way to deploy a staging version of this to gh-pages.
### Issue Tracking
The main issues related to the future of `developer_hub` are:
- https://github.com/paritytech/polkadot-sdk-docs/issues/31
- https://github.com/paritytech/polkadot-sdk-docs/issues/4
- https://github.com/paritytech/polkadot-sdk-docs/issues/26
- https://github.com/paritytech/polkadot-sdk-docs/issues/32
- https://github.com/paritytech/polkadot-sdk-docs/issues/36
### After This Pull Request
- [ ] create a redirect for
https://paritytech.github.io/polkadot-sdk/master/substrate/
- [x] analy…
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
We should have a zombienet test that (somehow*)) eagerly prunes the state of the relay parent of an candidate, immediately after backing. Then we should have a malus node disputing it.
Expected outcome:
*) Should be possible with interception as we do in malus nodes.
The text was updated successfully, but these errors were encountered: