This repo is built for specified Netgear hardware:
- R6260/R6350/R6850(NETGEAR-CHJ)
- R6700v2/R6800/R6900v2/R7200/R7450/AC2100/AC2400(NETGEAR-BZV)
- only tested on R6800
Owner of other hardware model is advised to use upstream repo.
- Backup eeprom first
- Use nmrpflash/breed to flash(at your own risk!)
- 默认登陆IP:192.168.2.1
- 默认用户名/密码:admin/admin
- 默认wifi密码:1234567890
- 集成/取消新增插件请修改此文件: trunk/build_firmware_modify
网件的闪存布局要求factory在ubi/firmware之后, 因此额外加入了NETGEAR_LAYOUT、FACTORY_OFFSET及RWFS_OFFSET选项。
- NETGEAR_LAYOUT表明布局为config及factory在firmware之后。
- FACTORY_OFFSET直接指定factory的起始位置, 跳过reserved0分区。
- RWFS_OFFSET直接指定RWFS的起始位置, 跳过reserved1分区。
目前无法直接创建reserved0与reserved1分区, 否则开机时会提示factory尺寸溢出。
已适配除官方适配及chongshengB分支外的网件套娃机型:
- R6220, MT7603+MT7612
- HWID为CHJ的机型(NETGEAR-CHJ), MT7603+MT7615: R6260/R6350/R6850
- HWID为BZV的机型(NETGEAR-BZV), MT7615+MT7615: R6700v2/R6800/R6900v2/R7200/R7450/AC2100/AC2400
- Get the tools to build the system or Download pre-built system image
- Feed the device with the system image file (Follow instructions of updating your current system)
- Perform factory reset
- Open web browser on http://my.router to configure the services
- To be completed
- 汉化字典来自：https://github.com/gorden5566/padavan
- 更新日志：https://www.jianshu.com/p/d76a63a12eae
- 使用gorden5566的汉化字典
- aria2前端更换为AriaNg
- curl可选编译可执行程序
CONFIG_FIRMWARE_INCLUDE_CURL - 使用了PROMETHEUS提供的部分补丁
- 使用了Linaro1985/padavan-ng的部分软件包
- 可选以下插件：
- scutclient
CONFIG_FIRMWARE_INCLUDE_SCUTCLIENT- gdut-drcom
CONFIG_FIRMWARE_INCLUDE_GDUT_DRCOM- dogcom
CONFIG_FIRMWARE_INCLUDE_DOGCOM- minieap
CONFIG_FIRMWARE_INCLUDE_MINIEAP- njit-client
CONFIG_FIRMWARE_INCLUDE_NJIT_CLIENT- napt66
CONFIG_FIRMWARE_INCLUDE_NAPT66- ssr/ss
CONFIG_FIRMWARE_INCLUDE_SHADOWSOCKS- ss-server
CONFIG_FIRMWARE_INCLUDE_SSSERVER- softether-vpnserver
CONFIG_FIRMWARE_INCLUDE_SOFTETHERVPN_SERVER- softether-vpnclient
CONFIG_FIRMWARE_INCLUDE_SOFTETHERVPN_CLIENT- softether-vpncmd
CONFIG_FIRMWARE_INCLUDE_SOFTETHERVPN_CMD- dns-forwarder
CONFIG_FIRMWARE_INCLUDE_DNSFORWARDER- vlmcsd
CONFIG_FIRMWARE_INCLUDE_VLMCSD- ttyd
CONFIG_FIRMWARE_INCLUDE_TTYD- lrzsz
CONFIG_FIRMWARE_INCLUDE_LRZSZ- htop
CONFIG_FIRMWARE_INCLUDE_HTOP- nano
CONFIG_FIRMWARE_INCLUDE_NANO- iperf3
CONFIG_FIRMWARE_INCLUDE_IPERF3- dump1090
CONFIG_FIRMWARE_INCLUDE_DUMP1090- rtl-sdr
CONFIG_FIRMWARE_INCLUDE_RTL_SDR- samba3.6
CONFIG_FIRMWARE_INCLUDE_SMBD36- mtr
CONFIG_FIRMWARE_INCLUDE_MTR- socat
CONFIG_FIRMWARE_INCLUDE_SOCAT- srelay
CONFIG_FIRMWARE_INCLUDE_SRELAY- 3proxy
CONFIG_FIRMWARE_INCLUDE_3PROXY- mentohust
CONFIG_FIRMWARE_INCLUDE_MENTOHUST- frpc
CONFIG_FIRMWARE_INCLUDE_FRPC- frps
CONFIG_FIRMWARE_INCLUDE_FRPS- tunsafe
CONFIG_FIRMWARE_INCLUDE_TUNSAFE- wireguard-go
CONFIG_FIRMWARE_INCLUDE_WIREGUARD
- 已适配除官方适配外的以下机型
- PSG1208
- PSG1218
- 5K-W20 (USB)
- OYE-001 (USB)
- NEWIFI-MINI (USB)
- MI-MINI (USB)
- MI-3 (USB)
- MI-3C
- MI-R3G (USB)
- HC5661A
- HC5761A (USB)
- HC5861B
- 360P2 (USB)
- MI-NANO
- MZ-R13
- MZ-R13P
- RT-AC1200GU (USB)
- XY-C1 (USB)
- WR1200JS (USB)
- NEWIFI3 (USB)
- B70 (USB)
- A3004NS (USB)
- K2P
- K2P-USB (USB)
- JCG-836PRO (USB)
- JCG-AC860M (USB)
- DIR-882 (USB)
- DIR-878
- MR2600 (USB)
- WDR7300
- RM2100
- R2100
- JCG-Y2(USB)
- E8820V2(USB)
- MSG1500(USB)
- 安装依赖包
# Debian/Ubuntu
sudo apt update
sudo apt install unzip libtool-bin curl cmake gperf gawk flex bison nano xxd \
fakeroot kmod cpio git python3-docutils gettext automake autopoint \
texinfo build-essential help2man pkg-config zlib1g-dev libgmp3-dev \
libmpc-dev libmpfr-dev libncurses5-dev libltdl-dev wget libc-dev-bin
# Archlinux/Manjaro
sudo pacman -Syu --needed git base-devel cmake gperf ncurses libmpc \
gmp python-docutils vim rpcsvc-proto fakeroot cpio help2man
# Alpine
sudo apk add make gcc g++ cpio curl wget nano xxd kmod \
pkgconfig rpcgen fakeroot ncurses bash patch \
bsd-compat-headers python2 python3 zlib-dev \
automake gettext gettext-dev autoconf bison \
flex coreutils cmake git libtool gawk sudo
# CentOS 7
sudo yum update
sudo yum groupinstall "Development Tools"
sudo yum install ncurses-* flex byacc bison zlib-* texinfo gmp-* mpfr-* gettext \
libtool* libmpc-* gettext-* python-docutils nano help2man fakeroot
# CentOS 8
sudo yum update
sudo yum groupinstall "Development Tools"
sudo yum install ncurses-* flex byacc bison zlib-* gmp-* mpfr-* gettext \
libtool* libmpc-* gettext-* nano fakeroot
# CentOS 8不能直接通过yum安装texinfo，help2man，python-docutils。请去官网下载发行的安装包编译安装
# 以texinfo为例
# cd /usr/local/src
# sudo wget http://ftp.gnu.org/gnu/texinfo/texinfo-6.7.tar.gz
# sudo tar zxvf texinfo-6.7.tar.gz
# cd texinfo-6.7
# sudo ./configure
# sudo make
# sudo make install
- 克隆源码
git clone --depth=1 https://github.com/pcslide/Padavan_R6800.git /opt/rt-n56u- 准备工具链
cd /opt/rt-n56u/toolchain-mipsel
# （推荐）使用脚本下载预编译的工具链：
sh dl_toolchain.sh
# 或者，也可以从源码编译工具链，这需要一些时间：
./clean_toolchain
./build_toolchain
- (可选) 修改机型配置文件
nano /opt/rt-n56u/trunk/configs/templates/NETGEAR-BZV.config- 开始编译
cd /opt/rt-n56u/trunk
./clear_tree
fakeroot ./build_firmware_modify NETGEAR-BZV
# 脚本第一个参数为路由型号, 在trunk/configs/templates/中
# 对于WSL环境，建议使用sudo进行编译，或者使用fakeroot-tcp代替fakeroot
# 编译好的固件在trunk/images里