To run, use the standalone py.test binary:

./py.test grinder

For verbose non-captured output:

./py.test --capture=no -vvv grinder

You can use typical pytest options:

./py.test -k only_this_test --collectonly grinder

For the brave & well (cluster) endowed:

easy_install -U pytest-xdist && py.test -n 6 grinder

The above command will fork and run 6 test in parallel. Because of increased load, latency increases and some test operations may timeout. YMMV.

Run py.test --help to see the configuration options. Look at the headings below for more information on options. You can change which hosts the test runs on, for instance, with:

./py.test --hosts=node1,node2 grinder

To make using py.test less tedious, store your favourite command-line options in pytest.ini. Here's an example:

$ cat pytest.ini
[pytest]
addopts=-vvv --capture=no --leave_on_failure

Requirements

Alternatively to using the included py.test, you can install pytest on your own and use it:

easy_install -U pytest

From wherever you choose to run Grinder, you should have the ptyhon-novaclient package installed. Additionally, you need to have Gridcentric's nova client extension, version 1.1.1244 or greater. An easy way to install it is:

pip install --user gridcentric_python_novaclient_ext

For further information look into: http://docs.gridcentric.com/openstack/installation.html

You should have the appropriate environment variables set to be able to access the OpenStack cluster being tested, with admin privileges:

OS_TENANT_NAME=admin_tenant
OS_USERNAME=joe_admin
OS_PASSWORD=sup3r_s3cr3t
OS_AUTH_URL=http://keystone_host:5000/v2.0

Or, you can pass them along as options:

./py.test grinder --os_tenant_name=admin_tenant \
--os_username=joe_admin \
--os_password=sup3r_s3cr3t \
--os_auth_url=http://keystone_host:5000/v2.0

On guests, we require password-less ssh login to the root account, or to an account with password-less sudo. For that you need to add your ssh keys to the nova key-pair list, and let Grinder know which key-pair name to use:

nova keypair-add --pub_key ~/.ssh/id_rsa.pub `whoami`
./py.test --guest_key_name=`whoami` grinder

If running the test from outside the OpenStack cluster, you will also need to configure the rules for the default security group to allow icmp and ssh traffic to VMs:

nova secgroup-add-rule default tcp 22 22 0.0.0.0/0
nova secgroup-add-rule default icmp -1 -1 0.0.0.0/0

Or, you can create your own security group for the test instances, with ssh and icmp open, and pass it along:

nova secgroup-create grinder 'Sec group for testing'
nova secgroup-add-rule grinder tcp 22 22 0.0.0.0/0
nova secgroup-add-rule grinder icmp -1 -1 0.0.0.0/0
./py.test --security_group=grinder grinder

To run some tests, you will need a key installed on the physical hosts as well. Grinder requires password-less login to the root account, or to an account capable of password-less sudo. The user is controlled by the --host_user option, and the path to the private key (if not ~/.ssh/id_rsa) is set with the --host_key_path option.

It's a good idea to set the environment variable OS_NO_CACHE=1 to prevent novaclient form interrupting tests by asking about keyrings.

Finally, the Grinder testing suite requires Folsom or later environments to test all features. Some tests will be skipped in Essex.

Configuring Images

Grinder will run all tests on each image in a list of images you provide. This is to ensure all functionality works on the typical guest images you use in your cloud. A typical image configuration stanza looks like this:

--image=precise-server.img,distro=ubuntu,arch=64,user=ubuntu

You can add this to your pytest.ini or your command line. You can add as many of this as images you want to test. Specifically, the stanza above means that the glance image precise-server.img will be used, and that the image is an Ubuntu distribution with a 64 bit kernel. The user ubuntu has password-less sudo rights, and allows password-less ssh login using the key set with the --guest_key_name option. Note that this is default behavior for Ubuntu cloud images with nova key injection. For CentOS images, you would typically set the user to root.

Some images may have minimum resource requirements. The image configuration takes an optional flavor argument which explicitly specifies a flavor to use with the particular image. When flavor is not provided, the global default flavor, specified by the flavor_name argument is used instead. An image configuration specifying a flavor might look like this:

--image=precise-server.img,distro=ubuntu,arch=64,user=ubuntu,flavor=m1.large

For images based on non-Linux operating systems, the platform key must be provided in the image configuration to specify the guest operation system. For more information regarding supported guest operating systems and additional setup required for non-Linux guests, see the "Guest Platforms" section below.

See the Image class in test/config.py for more options.

Guest Platforms

Currently Grinder supports Windows instances in addition to Linux instances. Specifically, Windows 7 (any service pack), Windows Server 2008 R2, and Windows Server 2012. Grinder can be made aware of instances running Windows by providing the platform key through the image configuration. For Windows instances the value should be windows. When the key is not provided, the value defaults to linux. A Windows image configuration might look like this:

--image=win7.img,distro=win7,arch=64,user=test,flavor=m1.large,platform=windows

For a Windows image, the user and distro keys are currently ignored but may be used in the future to support different versions of Windows.

Windows images used with grinder must contain a special 'TestListener' service which acts as the in-guest controller with which grinder communicates. The TestListener package can be obtained from:

http://docs.gridcentric.com/downloads/windows.html

Note that grinder attempts to connect to the TestListener on tcp port 9845 by default. This port must be allowed through both the instance's Windows firewall and added to the security group used by grinder:

nova secgroup-add-rule grinder tcp 9845 9845 0.0.0.0/0
./py.test --security_group=grinder grinder

If a different port must be used, both the TestListener and grinder must be configured with the new port. To modify the port on the TestListener, set the ListenPort parameter in the config file at C:\Program Files (x86)\Gridcentric\TestListener\test_listener.ini.

Tempest-based configuration

Grinder can read most of its configuration parameters from Tempest, the OpenStack integration test suite.

https://github.com/openstack/tempest

This is specified through the option tempest_config:

--tempest_config=/path/to/tempest.conf

Grinder will use the following keys in tempest.conf:

• username, from the section [compute-admin]
• password, [compute-admin]
• tenant_name, [compute-admin]
• admin_username, section [identity], as fallback if the [compute_admin] section is incomplete or lacking
• admin_password, [identity], fallback
• admin_tenant_name, [identity], fallback
• uri, [identity]
• region_name, [identity], if present
• image_ref, [compute]
• flavor_ref, [compute]
• ssh_user, [compute]

The uri, region_name, username, password, and tenant_name keys (or their fallbacks) are used for authenticating to the OpenStack cluster.

The image_ref, flavor_ref and ssh_user keys are used to configure the image for running tests. Grinder will further require setting the following two options related to this image:

• tc_distro - the distro name
• tc_arch - the arch

Here is an example of a command line that uses tempest.conf:

py.test --tempest_config=/path/to/tempest.conf --tc_distro=ubuntu --tc_arch=64 grinder

List of hosts

The list of hosts used for testing is generated as follows:

• If the option hosts is present in either pytest.ini or the command line, its value is used for the list.
• Otherwise, the value of hosts is the list of all hosts that nova API is aware of.
• In either case, only those hosts in the list that are running the service gridcentric are retained.
• Folsom and later only: All resulting hosts should belong to the availability zone set through the default_az configuration option (defaults to 'nova').

The list hosts_without_gridcentric is used for migration tests. It is generated as follows:

• If it is provided as an option in pytest.ini or on the command line, the value of that option is used as the list of hosts.
• Otherwise, the list of all hosts obtained via nova API (and not running gridcentric) is used.
• If the list is empty and local host is not running gridcentric, then the local host is used.

NOTE: For Grinder to be able to get the list of all hosts from nova API, a reasonably recent version of python-novaclient has to be installed, and Grinder must be using admin privileges in order to query all hosts in the cluster. Otherwise, Grinder only uses hosts and hosts_without_gridcentric as specified in the configuration.

Further options

Please have a look into grinder/config.py. All configuration options are documented as attributes of the Config and Image classes. Any such attribute can be set through the command line or pytest.ini. For example, --skip_migration_tests.

Licensing

Grinder is released under the terms of the Apache license. This suite redistributes py.test, taken from the pytest project, and distributed under the terms of the MIT license.