🔖 A set of well-tested, commonly used template literal tag functions for use in ES2015+.
🌟 Plus some extra goodies for easily making your own tags.
| Info | Badges |
|---|---|
| Version |   |
| License |  |
| Popularity |  |
| Testing |   |
| Quality |    |
| Style |  |
- 👋 Introduction
- 💞 Why should you care?
- ⏬ Installation
- 📚 Usage
- 🔧 Advanced Usage
- How to Contribute
- License
- 🌠 Other ES2015 Template Tag Modules
common-tags initially started out as two template tags I'd always find myself writing - one for stripping indents, and one for trimming multiline strings down to a single line. In it's prime, I was an avid user of CoffeeScript, which had this behaviour by default as part of it's block strings feature. I also started out programming in Ruby, which has a similar mechanism called Heredocs.
Over time, I found myself needing a few more template tags to cover edge cases - ones that supported including arrays, or ones that helped to render out tiny bits of HTML not large enough to deserve their own file or an entire template engine. So I packaged all of these up into this module.
As more features were proposed, and I found myself needing a way to override the default settings to cover even more edge cases, I realized that my initial implementation wouldn't be easy to scale.
So I re-wrote this module on top of a core architecture that makes use of transformer plugins which can be composed, imported independently and re-used.
Have a read of the next section to find out why you should care. 😄
Tagged templates in ES2015 are a welcome feature. But, they have their downsides. One such downside is that they preserve all whitespace by default - which makes multiline strings in source code look terrible.
Source code is not just for computers to interpret. Humans have to read it too 😁. If you care at all about how neat your source code is, or come from a CoffeeScript background and miss the block string syntax, then you will love common-tags, as it was initially intended to bring this feature "back" to JS since it's initial commit.
common-tags also exposes a means of composing pipelines of dynamic transformer plugins. As someone with a little experience writing tagged templates, I can admit that it is often the case that one tag might need to do the same thing as another tag before doing any further processing; for example - a typical tag that renders out HTML could strip initial indents first, then worry about handling character escapes. Both steps could easily be useful as their own separate template tags, but there isn't an immediately obvious way of composing the two together for maximum re-use. common-tags offers not one, but two ways of doing this.
Furthermore, I try to keep this project as transparently stable and updated as frequently as I possibly can. As you may have already seen by the project status table, common-tags is linted, well tested, tests are well covered, tests pass on both Unix and Windows operating systems, the popularity bandwidth is easily referenced and dependency health is in plain sight 😄. common-tags is also already used in production on a number of proprietary sites and dependent projects, and contributions are always welcome, as are suggestions.
The official recommendation for running common-tags is as follows:
- Node.js v5.0.0 or higher
- In order to use
common-tags, your environment will also need to support ES2015 tagged templates (pssst… check Babel out).
It might work with below versions of Node, but this is not a gaurantee.
common-tags is a Node module. So, as long as you have Node.js and NPM installed, installing common-tags is as simple as running this in a terminal at the root of your project:
$ npm install common-tags --saveLike all modules, common-tags begins with an import. In fact, common-tags supports two styles of import:
Named imports:
import {stripIndent} from 'common-tags'Direct module imports:
(Useful if your bundler doesn't support tree shaking but you still want to only include modules you need).
import stripIndent from 'common-tags/lib/stripIndent'common-tags exports a bunch of wonderful pre-cooked template tags for your eager consumption. They are as follows:
You'll often find that you might want to include an array in a template. Typically, doing something like ${array.join(', ')} would work - but what if you're printing a list of items in an HTML template and want to maintain the indentation? You'd have to count the spaces manually and include them in the .join() call - which is a bit ugly for my taste. This tag properly indents arrays, as well as newline characters in string substitutions, by converting them to an array split by newline and re-using the same array inclusion logic:
import {html} from 'common-tags'
let fruits = ['apple', 'orange', 'watermelon']
html`
<div class="list">
<ul>
${fruits.map(fruit => `<li>${fruit}</li>`)}
${'<li>kiwi</li>\n<li>guava</li>'}
</ul>
</div>
`);Outputs:
<div class="list">
<ul>
<li>apple</li>
<li>orange</li>
<li>watermelon</li>
<li>kiwi</li>
<li>guava</li>
</ul>
</div>A tag very similar to html but it does safe HTML escaping for strings coming from substitutions. When combined with regular html tag, you can do basic HTML templating that is safe from XSS (Cross-Site Scripting) attacks.
import {html, safeHtml} from 'common-tags'
let userMessages = ['hi', 'what are you up to?', '<script>alert("something evil")</script>']
html`
<div class="chat-list">
<ul>
${userMessages.map(message => safeHtml`<li>${message}</li>`)}
</ul>
</div>
`Outputs:
<div class="chat-list">
<ul>
<li>hi</li>
<li>what are you up to?</li>
<li><script>alert("something evil")</script></li>
</ul>
</div>Allows you to keep your single-line strings under 80 characters without resorting to crazy string concatenation.
import {oneLine} from 'common-tags'
oneLine`
foo
bar
baz
`)
// "foo bar baz"Allows you to keep your single-line strings under 80 characters while trimming the new lines:
import {oneLineTrim} from 'common-tags'
oneLineTrim`
https://news.com/article
?utm_source=designernews.co
`)
// https://news.com/article?utm_source=designernews.coIf you want to strip the initial indentation from the beginning of each line in a multiline string:
import {stripIndent} from 'common-tags'
stripIndent`
This is a multi-line string.
You'll ${verb} that it is indented.
We don't want to output this indentation.
But we do want to keep this line indented.
`
// This is a multi-line string.
// You'll notice that it is indented.
// We don't want to output this indentation.
// But we do want to keep this line indented.If you want to strip all of the indentation from the beginning of each line in a multiline string:
import {stripIndents} from 'common-tags'
stripIndents`
This is a multi-line string.
You'll ${verb} that it is indented.
We don't want to output this indentation.
We don't want to keep this line indented either.
`
// This is a multi-line string.
// You'll notice that it is indented.
// We don't want to output this indentation.
// We don't want to keep this line indented either.Allows you to inline an array substitution as a list:
import {inlineLists} from 'common-tags'
inlineLists`
I like ${['apples', 'bananas', 'watermelons']}
They're good!
`
// I like apples bananas watermelons
// They're good!Allows you to inline an array substitution as a list, rendered out on a single line:
import {oneLineInlineLists} from 'common-tags'
oneLineInlineLists`
I like ${['apples', 'bananas', 'watermelons']}
They're good!
`
// I like apples bananas watermelons They're good!Allows you to inline an array substitution as a comma-separated list:
import {commaLists} from 'common-tags'
commaLists`
I like ${['apples', 'bananas', 'watermelons']}
They're good!
`
// I like apples, bananas, watermelons
// They're good!Allows you to inline an array substitution as a comma-separated list, the last of which is preceded by the word "or":
import {commaListsOr} from 'common-tags'
commaListsOr`
I like ${['apples', 'bananas', 'watermelons']}
They're good!
`
// I like apples, bananas or watermelons
// They're good!Allows you to inline an array substitution as a comma-separated list, the last of which is preceded by the word "and":
import {commaListsAnd} from 'common-tags'
commaListsAnd`
I like ${['apples', 'bananas', 'watermelons']}
They're good!
`
// I like apples, bananas and watermelons
// They're good!Allows you to inline an array substitution as a comma-separated list, and is rendered out on to a single line:
import {oneLineCommaLists} from 'common-tags'
oneLineCommaLists`
I like ${['apples', 'bananas', 'watermelons']}
They're good!
`
// I like apples, bananas or watermelons They're good!Allows you to inline an array substitution as a comma-separated list, the last of which is preceded by the word "or", and is rendered out on to a single line:
import {oneLineCommaListsOr} from 'common-tags'
oneLineCommaListsOr`
I like ${['apples', 'bananas', 'watermelons']}
They're good!
`
// I like apples, bananas or watermelons They're good!Allows you to inline an array substitution as a comma-separated list, the last of which is preceded by the word "and", and is rendered out on to a single line:
import {oneLineCommaListsAnd} from 'common-tags'
oneLineCommaListsAnd`
I like ${['apples', 'bananas', 'watermelons']}
They're good!
`
// I like apples, bananas and watermelons They're good!It's possible to pass the output of a tagged template to another template tag in pure ES2015+:
import {oneLine} from 'common-tags'
oneLine`
${String.raw`
foo
bar\nbaz
`}
`
// "foo bar\nbaz"We can make this neater. Every tag common-tags exports can delay execution if it receives a function as it's first argument. This function is assumed to be a template tag, and is called via an intermediary tagging process before the result is passed back to our tag. Use it like so (this code is equivalent to the previous code block):
import {oneLine} from 'common-tags'
oneLine(String.raw)`
foo
bar\nbaz
`
// "foo bar\nbaz"common-tags exposes an interface that allows you to painlessly create your own template tags.
common-tags exports a TemplateTag class. This class is the foundation of common-tags. The concept of the class works on the premise that transformations occur on a template either when the template is finished being processed (onEndResult), or when the tag encounters a substitution (onSubstitution). Any tag produced by this class supports tail processing.
The easiest tag to create is a tag that does nothing:
import {TemplateTag} from 'common-tags'
const doNothing = new TemplateTag()
doNothing`foo bar`
// 'foo bar'TemplateTag receives either an array or argument list of transformers. A transformer is just a plain object with two optional methods - onSubstitution and onEndResult - it looks like this:
{
onSubstitution (substitution, resultSoFar) {
// optional. Called when the tag encounters a substitution.
// (a substitution is whatever's inside "${}" in your template literal)
// `substitution` is the value of the current substitution
// `resultSoFar` is the end result up to the point of this substitution
},
onEndResult (endResult) {
// optional. Called when all substitutions have been parsed
// `endResult` is the final value.
}
}You can wrap a transformer in a function that receives arguments in order to create a dynamic plugin:
const substitutionReplacer = (oldValue, newValue) => ({
onSubstitution(substitution, resultSoFar) {
if (substitution === oldValue) {
return newValue
}
return substitution
}
})
const replaceFizzWithBuzz = new TemplateTag(substitutionReplacer('fizz', 'buzz'))
replaceFizzWithBuzz`foo bar ${"fizz"}`
// "foo bar buzz"note - if you call
new TemplateTag(substitutionReplacer),substitutionReplacerwill automatically be initiated with no arguments.
You can pass a list of transformers, and TemplateTag will call them on your tag in the order they are specified:
// note: passing these as an array also works
const replace = new TemplateTag(
substitutionReplacer('fizz', 'buzz'),
substitutionReplacer('foo', 'bar')
)
replace`${"foo"} ${"fizz"}`
// "bar buzz"When multiple transformers are passed to TemplateTag, they will be iterated twice - first, all transformer onSubstitution methods will be called. Once they are done processing, all transformer onEndResult methods will be called.
This is super easy. Transformers are just objects, after all. They have full access to this:
const listSubs = {
onSubstitution(sub, res) {
this.ctx = this.ctx || { subs: [] }
this.ctx.subs.push({ sub, precededBy: res })
return sub
},
onEndResult(res) {
return this.ctx
}
}
const toJSON = {
onEndResult(res) {
return JSON.stringify(res, null, 2)
}
}
const log = {
onEndResult(res) {
console.log(res)
return res
}
}
const process = new TemplateTag([listSubs, toJSON, log])
process`
foo ${'bar'}
fizz ${'buzz'}
`
// {
// "subs": [
// {
// "sub": "bar",
// "precededBy": "\n foo "
// },
// {
// "sub": "buzz",
// "precededBy": "\n foo bar\n fizz "
// }
// ]
// }Since common-tags is built on the foundation of this TemplateTag class, it comes with its own set of built-in transformers:
Trims the whitespace surrounding the end result. Accepts an optional side (can be "left" or "right") that when supplied, will only trim whitespace from that side of the string.
Strips the indents from the end result. Offers two types: all, which removes all indentation from each line, and initial, which removes the shortest indent level from each line. Defaults to initial.
Replaces a value or pattern in the end result with a new value. replaceWhat can be a string or a regular expression, replaceWith is the new value.
Replaces the result of all substitutions (results of calling ${ ... }) with a new value. Same as for replaceResultTransformer, replaceWhat can be a string or regular expression and replaceWith is the new value.
Converts any array substitutions into a string that represents a list. Accepts an options object:
opts = {
separator: ',', // what to separate each item with (always followed by a space)
conjunction: 'and', // replace the last separator with this value
serial: true // should the separator be included before the conjunction? As in the case of serial/oxford commas
}Splits a string substitution into an array by the provided splitBy substring, only if the string contains the splitBy substring.
Please see the Contribution Guidelines.
MIT. See license.md.
If common-tags doesn't quite fit your bill, and you just can't seem to find what you're looking for - perhaps these might be of use to you?
- tage - make functions work as template tags too
- is-tagged - Check whether a function call is initiated by a tagged template string or invoked in a regular way
- es6-template-strings - Compile and resolve template strings notation as specified in ES6
- t7 - A light-weight virtual-dom template library
- html-template-tag - ES6 Tagged Template for compiling HTML template strings.
- clean-tagged-string - A simple utility function to clean ES6 template strings.
- multiline-tag - Tags for template strings making them behave like coffee multiline strings
- deindent - ES6 template string helper for deindentation.
- heredoc-tag - Heredoc helpers for ES2015 template strings
- regx - Tagged template string regular expression compiler.
- regexr - Provides an ES6 template tag function that makes it easy to compose regexes out of template strings without double-escaped hell.
- url-escape-tag - A template tag for escaping url parameters based on ES2015 tagged templates.
- shell-escape-tag - An ES6+ template tag which escapes parameters for interpolation into shell commands.
- sql-tags - ES6 tagged template string functions for SQL statements.
- sql-tag - A template tag for writing elegant sql strings.
- sequelize-sql-tag - A sequelize plugin for sql-tag
- pg-sql-tag - A pg plugin for sql-tag
- sql-template-strings - ES6 tagged template strings for prepared statements with mysql and postgres
- sql-composer - Composable SQL template strings for Node.js
- pg-template-tag - ECMAScript 6 (2015) template tag function to write queries for node-postgres.
- digraph-tag - ES6 string template tag for quickly generating directed graph data
- es2015-i18n-tag - ES2015 template literal tag for i18n and l10n translation and localization