arm64: dts: rockchip: remove redundant cd-gpios from rk3588 sdmmc nodes

The sdmmc node already have a "&sdmmc_det" for pinctrl which switch the
GPIO0A4 to sdmmc detect function, no need to define a separate "cd-gpios".

RK3588 has force_jtage feature which is enable JTAG function via sdmmc
pins automatically when there is no SD card insert, this feature will
need the GPIO0A4 works in sdmmc_det function like other mmc signal instead
of GPIO function, or else the force_jtag can not auto be disabled when
SD card insert.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Link: https://lore.kernel.org/r/20240201034621.1970279-1-kever.yang@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts

@@ -444,7 +444,6 @@
 &sdmmc {
  bus-width = <4>;
  cap-sd-highspeed;
- cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
  disable-wp;
  max-frequency = <150000000>;
  no-sdio;

arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts

@@ -429,7 +429,6 @@
 &sdmmc {
  bus-width = <4>;
  cap-sd-highspeed;
- cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
  disable-wp;
  max-frequency = <150000000>;
  no-sdio;

arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts

@@ -378,7 +378,6 @@
  bus-width = <4>;
  cap-mmc-highspeed;
  cap-sd-highspeed;
- cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
  disable-wp;
  sd-uhs-sdr104;
  vmmc-supply = <&vcc_3v3_s3>;

arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts

@@ -366,7 +366,6 @@
  bus-width = <4>;
  cap-mmc-highspeed;
  cap-sd-highspeed;
- cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
  disable-wp;
  max-frequency = <150000000>;
  no-sdio;