drm/amdgpu: Wait for bootloader after PSPv11 reset #383
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ Upstream commit add4c48 ] When the bfad_im_probe() function fails during initialization, the memory pointed to by bfad->im is freed without setting bfad->im to NULL. Subsequently, during driver uninstallation, when the state machine enters the bfad_sm_stopping state and calls the bfad_im_probe_undo() function, it attempts to free the memory pointed to by bfad->im again, thereby triggering a double-free vulnerability. Set bfad->im to NULL if probing fails. Signed-off-by: jackysliu <1972843537@qq.com> Link: https://lore.kernel.org/r/tencent_3BB950D6D2D470976F55FC879206DE0B9A09@qq.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d91b37 ] The fileset value of the inode copy from the disk by the reproducer is AGGR_RESERVED_I. When executing evict, its hard link number is 0, so its inode pages are not truncated. This causes the bugon to be triggered when executing clear_inode() because nrpages is greater than 0. Reported-by: syzbot+6e516bb515d93230bc7b@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6e516bb515d93230bc7b Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d04df8 ] The reproducer builds a corrupted file on disk with a negative i_size value. Add a check when opening this file to avoid subsequent operation failures. Reported-by: syzbot+630f6d40b3ccabc8e96e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=630f6d40b3ccabc8e96e Tested-by: syzbot+630f6d40b3ccabc8e96e@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c214006 ] When computing the tree index in dbAllocAG, we never check if we are out of bounds realative to the size of the stree. This could happen in a scenario where the filesystem metadata are corrupted. Reported-by: syzbot+cffd18309153948f3c3e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=cffd18309153948f3c3e Tested-by: syzbot+cffd18309153948f3c3e@syzkaller.appspotmail.com Signed-off-by: Arnaud Lecomte <contact@arnaud-lcm.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99f2211 ] probe() requests the reset GPIO to be set to high when getting it. Immeditately after this hi556_resume() is called and sets the GPIO low. If the GPIO was low before requesting it this will result in the GPIO only very briefly spiking high and the sensor not being properly reset. The same problem also happens on back to back runtime suspend + resume. Fix this by adding a sleep of 2 ms in hi556_resume() before setting the GPIO low (if there is a reset GPIO). The final sleep is kept unconditional, because if there is e.g. no reset GPIO but a controllable clock then the sensor also needs some time after enabling the clock. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
…LE_MEM [ Upstream commit 09d231a ] Since both "length" and "offset" are of type u32, there is no functional issue here. Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Signed-off-by: Shravya KN <shravya.k-n@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/20250704043857.19158-2-kalesh-anakkur.purayil@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 735b725 ] The intermediary value was included in the wrong hash state. While there, adapt to user-space by setting the timestamp to 0 if stuck and inserting the values nevertheless. Acked-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Markus Theil <theil.markus@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9f4a6b ] Not all tasks have an ABI associated or vDSO mapped, for example kthreads never do. If such a task ever ends up calling stack_top(), it will derefence the NULL ABI pointer and crash. This can for example happen when using kunit: mips_stack_top+0x28/0xc0 arch_pick_mmap_layout+0x190/0x220 kunit_vm_mmap_init+0xf8/0x138 __kunit_add_resource+0x40/0xa8 kunit_vm_mmap+0x88/0xd8 usercopy_test_init+0xb8/0x240 kunit_try_run_case+0x5c/0x1a8 kunit_generic_run_threadfn_adapter+0x28/0x50 kthread+0x118/0x240 ret_from_kernel_thread+0x14/0x1c Only dereference the ABI point if it is set. The GIC page is also included as it is specific to the vDSO. Also move the randomization adjustment into the same conditional. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c9a7ff ] request_mem_region() will return NULL instead of error code when the memory request fails. Therefore, we should check if the return value is non-zero instead of less than zero. In this way, this patch also fixes the build warnings: arch/mips/lantiq/falcon/sysctrl.c:214:50: error: ordered comparison of pointer with integer zero [-Werror=extra] 214 | res_status.name) < 0) || | ^ arch/mips/lantiq/falcon/sysctrl.c:216:47: error: ordered comparison of pointer with integer zero [-Werror=extra] 216 | res_ebu.name) < 0) || | ^ arch/mips/lantiq/falcon/sysctrl.c:219:50: error: ordered comparison of pointer with integer zero [-Werror=extra] 219 | res_sys[0].name) < 0) || | ^ arch/mips/lantiq/falcon/sysctrl.c:222:50: error: ordered comparison of pointer with integer zero [-Werror=extra] 222 | res_sys[1].name) < 0) || | ^ arch/mips/lantiq/falcon/sysctrl.c:225:50: error: ordered comparison of pointer with integer zero [-Werror=extra] 225 | res_sys[2].name) < 0)) | Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b791dcf ] Firmware attach DATACORRUPT/DROP buffer flags for the frames which needs to be dropped, handle it by setting VB2_BUF_STATE_ERROR for these buffers before calling buf_done. Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # on sa8775p-ride Signed-off-by: Bryan O'Donoghue <bod@kernel.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0370395 ] Probing peripherals in the AON and PERI domains, such as the PVT thermal sensor and the PWM controller, can lead to boot hangs or unresponsive devices on the LPi4A board. The root cause is that their parent bus clocks ('CLK_CPU2AON_X2H' and the 'CLK_PERISYS_APB' clocks) are automatically gated by the kernel's power-saving mechanisms when the bus is perceived as idle. Alternative solutions were investigated, including modeling the parent bus in the Device Tree with 'simple-pm-bus' or refactoring the clock driver's parentage. The 'simple-pm-bus' approach is not viable due to the lack of defined bus address ranges in the hardware manual and its creation of improper dependencies on the 'pm_runtime' API for consumer drivers. Therefore, applying the'`CLK_IGNORE_UNUSED' flag directly to the essential bus clocks is the most direct and targeted fix. This prevents the kernel from auto-gating these buses and ensures peripherals remain accessible. This change fixes the boot hang associated with the PVT sensor and resolves the functional issues with the PWM controller. Link: https://lore.kernel.org/all/9e8a12db-236d-474c-b110-b3be96edf057@samsung.com/ [1] Reviewed-by: Drew Fustini <drew@pdp7.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com> Signed-off-by: Drew Fustini <drew@pdp7.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df2f8fd ] Proper clock configuration is required to advance through FSM states. Prior than this having a different clock value than default sensor's value was used (12 MHz) could prevent the sensor from booting. Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b69a84 ] As a bit rate is expressed in bps, use MEGA instead of HZ_PER_MHZ. Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 484f8be ] The OV5670 is found on Dell 7212 tablets paired with an IPU3 ISP and needs to be connected by the ipu-bridge. Add it to the list of supported devices. Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
…control [ Upstream commit 5a0abb8 ] When operating a pipeline with a missing V4L2_CID_LINK_FREQ control this two line warning is printed each time the pipeline is started. Reduce this excessive logging by only warning once for the missing control. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e84a5e ] mc_subled used for multi_index needs well defined array indexes, to guarantee the desired result, use reg for that. If devicetree child nodes is processed in random or reverse order you may end up with multi_index "blue green red" instead of the expected "red green blue". If user space apps uses multi_index to deduce how to control the leds they would most likely be broken without this patch if devicetree processing is reversed (which it appears to be). arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts has reg set but I don't see how it can have worked without this change. If reg is not set, an error is returned, If reg is out of range, an error is returned. reg within led child nodes starts with 0, to map to the iout in each bank. Signed-off-by: Johan Adolfsson <johan.adolfsson@axis.com> Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Link: https://lore.kernel.org/r/20250617-led-fix-v7-1-cdbe8efc88fa@axis.com Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
… sgs [ Upstream commit e19bdba ] DMA operates in Double Buffer Mode (DBM) when the transfer is cyclic and there are at least two periods. When DBM is enabled, the DMA toggles between two memory targets (SxM0AR and SxM1AR), indicated by the SxSCR.CT bit (Current Target). There is no need to update the next memory address if two periods are configured, as SxM0AR and SxM1AR are already properly set up before the transfer begins in the stm32_dma_start_transfer() function. This avoids unnecessary updates to SxM0AR/SxM1AR, thereby preventing potential Transfer Errors. Specifically, when the channel is enabled, SxM0AR and SxM1AR can only be written if SxSCR.CT=1 and SxSCR.CT=0, respectively. Otherwise, a Transfer Error interrupt is triggered, and the stream is automatically disabled. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20250624-stm32_dma_dbm_fix-v1-1-337c40d6c93e@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59f7d21 ] The function divides number of online CPUs by num_core_siblings, and later checks the divider by zero. This implies a possibility to get and divide-by-zero runtime error. Fix it by moving the check prior to division. This also helps to save one indentation level. Signed-off-by: Yury Norov [NVIDIA] <yury.norov@gmail.com> Link: https://patch.msgid.link/20250604193947.11834-3-yury.norov@gmail.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43163f4 ] In the s390 defconfig, gcc-10 and earlier end up inlining three functions into nldev_stat_get_doit(), and each of them uses some 600 bytes of stack. The result is a function with an overly large stack frame and a warning: drivers/infiniband/core/nldev.c:2466:1: error: the frame size of 1720 bytes is larger than 1280 bytes [-Werror=frame-larger-than=] Mark the three functions noinline_for_stack to prevent this, ensuring that only one copy of the nlattr array is on the stack of each function. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20250620113335.3776965-1-arnd@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
…mo_callbk [ Upstream commit 1cced57 ] For SLI3, the HBA_SETUP flag is never set so the lpfc_dev_loss_tmo_callbk always early returns. Add a phba->sli_rev check for SLI4 mode so that the SLI3 path can flow through the original dev_loss_tmo worker thread design to lpfc_dev_loss_tmo_handler instead of early return. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20250618192138.124116-9-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
…ture [ Upstream commit 6698796 ] If a call to lpfc_sli4_read_rev() from lpfc_sli4_hba_setup() fails, the resultant cleanup routine lpfc_sli4_vport_delete_fcp_xri_aborted() may occur before sli4_hba.hdwqs are allocated. This may result in a null pointer dereference when attempting to take the abts_io_buf_list_lock for the first hardware queue. Fix by adding a null ptr check on phba->sli4_hba.hdwq and early return because this situation means there must have been an error during port initialization. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20250618192138.124116-4-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac8aff0 ] The iMX8QXP (and variants such as the QX, DX, DXP) all identify as iMX8QXP. They have the exact same restrictions as the supported iMX8QM introduced at commit 61bb8db ("crypto: caam - Add support for i.MX8QM") Loosen the check a little bit with a wildcard to also match the iMX8QXP and its variants. Signed-off-by: John Ernberg <john.ernberg@actia.se> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 202ac22 ] On some Dell XPS 13 (9345) variants, the battery used is lithium-polymer based. Currently, this is reported as unknown technology due to the entry missing. [ 4083.135325] Unknown battery technology 'LIP' Add another check for lithium-polymer in the technology parsing callback and return that instead of unknown. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250523-psy-qcom-battmgr-add-lipo-entry-v1-1-938c20a43a25@linaro.org Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4051ead ] Syzkaller can create many uhid devices that trigger repeated warnings like: "hid-generic xxxx: unknown main item tag 0x0" These messages can flood the system log, especially if a crash occurs (e.g., with a slow UART console, leading to soft lockups). To mitigate this, convert `hid_warn()` to use `dev_warn_ratelimited()`. This helps reduce log noise and improves system stability under fuzzing or faulty device scenarios. Signed-off-by: Li Chen <chenl311@chinatelecom.cn> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15592a1 ] With the ATA error model, an NCQ command failure always triggers an abort (termination) of all NCQ commands queued on the device. In such case, the SAT or the host must handle the failed command according to the command sense data and immediately retry all other NCQ commands that were aborted due to the failed NCQ command. For SAS HBAs controlled by the mpt3sas driver, NCQ command aborts are not handled by the HBA SAT and sent back to the host, with an ioc log information equal to 0x31080000 (IOC_LOGINFO_PREFIX_PL with the PL code PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR). The function _scsih_io_done() always forces a retry of commands terminated with the status MPI2_IOCSTATUS_SCSI_IOC_TERMINATED using the SCSI result DID_SOFT_ERROR, regardless of the log_info for the command. This correctly forces the retry of collateral NCQ abort commands, but with the retry counter for the command being incremented. If a command to an ATA device is subject to too many retries due to other NCQ commands failing (e.g. read commands trying to access unreadable sectors), the collateral NCQ abort commands may be terminated with an error as they run out of retries. This violates the SAT specification and causes hard-to-debug command errors. Solve this issue by modifying the handling of the MPI2_IOCSTATUS_SCSI_IOC_TERMINATED status to check if a command is for an ATA device and if the command loginfo indicates an NCQ collateral abort. If that is the case, force the command retry using the SCSI result DID_IMM_RETRY to avoid incrementing the command retry count. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250606052747.742998-3-dlemoal@kernel.org Tested-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 258a0a1 ] This change frees resources after an error is detected. Signed-off-by: Francisco Gutierrez <frankramirez@google.com> Link: https://lore.kernel.org/r/20250617210443.989058-1-frankramirez@google.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04caad5 ] With the ATA error model, an NCQ command failure always triggers an abort (termination) of all NCQ commands queued on the device. In such case, the SAT or the host must handle the failed command according to the command sense data and immediately retry all other NCQ commands that were aborted due to the failed NCQ command. For SAS HBAs controlled by the mpi3mr driver, NCQ command aborts are not handled by the HBA SAT and sent back to the host, with an ioc log information equal to 0x31080000 (IOC_LOGINFO_PREFIX_PL with the PL code PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR). The function mpi3mr_process_op_reply_desc() always forces a retry of commands terminated with the status MPI3_IOCSTATUS_SCSI_IOC_TERMINATED using the SCSI result DID_SOFT_ERROR, regardless of the ioc_loginfo for the command. This correctly forces the retry of collateral NCQ abort commands, but with the retry counter for the command being incremented. If a command to an ATA device is subject to too many retries due to other NCQ commands failing (e.g. read commands trying to access unreadable sectors), the collateral NCQ abort commands may be terminated with an error as they run out of retries. This violates the SAT specification and causes hard-to-debug command errors. Solve this issue by modifying the handling of the MPI3_IOCSTATUS_SCSI_IOC_TERMINATED status to check if a command is for an ATA device and if the command ioc_loginfo indicates an NCQ collateral abort. If that is the case, force the command retry using the SCSI result DID_IMM_RETRY to avoid incrementing the command retry count. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250606052747.742998-2-dlemoal@kernel.org Tested-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0b9375 ] RK3588 TRM, section "11.6.1.3.3 Hot Reset and Link-Down Reset" states that: If you want to delay link re-establishment (after reset) so that you can reprogram some registers through DBI, you must set app_ltssm_enable =0 immediately after core_rst_n as shown in above. This can be achieved by enable the app_dly2_en, and end-up the delay by assert app_dly2_done. I.e. setting app_dly2_en will automatically deassert app_ltssm_enable on a hot reset, and setting app_dly2_done will re-assert app_ltssm_enable, re-enabling link training. When receiving a hot reset/link-down IRQ when running in EP mode, we will call dw_pcie_ep_linkdown(), which may update registers through DBI. Unless link training is inhibited, these register updates race with the link training. To avoid the race, set PCIE_LTSSM_APP_DLY2_EN so the controller never automatically trains the link after a link-down or hot reset interrupt. That way any DBI updates done in the dw_pcie_ep_linkdown() path will happen while the link is still down. Then allow link training by setting PCIE_LTSSM_APP_DLY2_DONE Co-developed-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20250613101908.2182053-2-cassel@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c5cc2f ] Trying to set the affinity of the interrupts associated to stm32 pinctrl results in a write error. Fill struct irq_chip::irq_set_affinity to use the default helper function. Signed-off-by: Cheick Traore <cheick.traore@foss.st.com> Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Link: https://lore.kernel.org/20250610143042.295376-3-antonio.borneo@foss.st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57b5a30 ] The driver checks if "vq->max_num_buffers + *nbuffers < 3", but vq->max_num_buffers is (by default) 32, so the check is never true. Nor does the check make sense. The original code in the BSP kernel was "vq->num_buffers + *nbuffers < 3", but got mangled along the way to upstream. The intention was to make sure that at least 3 buffers are allocated. Fix this by removing the bad lines and setting q->min_reqbufs_allocation to three. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 81f6650.
This reverts commit 112a7f9.
This reverts commit 0470d83. Barlow Ridge removes support for FWCM. Signed-off-by: Tim Crawford <tcrawford@system76.com>
The Nvidia proprietary driver has some bugs that leads to issues if used with the simpledrm driver. The most noticeable is that does not register an emulated fbdev device. It just relies on a fbdev to be registered by another driver, that could be that could be attached to the framebuffer console. On UEFI machines, this is the efifb driver. This means that disabling the efifb driver will cause virtual consoles to not be present in the system when using the Nvidia driver. Legacy BIOS is not affected just because fbcon is not used there, but instead vgacon. Unless a VGA mode is specified using the vga= kernel command line option, in that case the vesafb driver is used instead and its fbdev attached to the fbcon. This is a problem because with CONFIG_SYSFB_SIMPLEFB=y, the sysfb platform code attempts to register a "simple-framebuffer" platform device (that is matched against simpledrm) and only registers either an "efi-framebuffer" or "vesa-framebuffer" if this fails to be registered due the video modes not being compatible. The Nvidia driver relying on another driver to register the fbdev is quite fragile, since it can't really assume those will stick around. For example there are patches posted to remove the EFI and VESA platform devices once a real DRM or fbdev driver probes. But in any case, moving to a simpledrm + emulated fbdev only breaks this assumption and causes users to not have VT if the Nvidia driver is used. So to prevent this, let's add a workaround and make the sysfb to skip the "simple-framebuffer" registration when nvidia-drm.modeset=1 option is set. This is quite horrible, but honestly I can't think of any other approach. For this to work, the CONFIG_FB_EFI and CONFIG_FB_VESA config options must be enabled besides CONFIG_DRM_SIMPLEDRM. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jeremy Soller <jackpot51@gmail.com>
This reverts commit b38f2d5.
…02508231538 Signed-off-by: Michael Aaron Murphy <michael@mmurphy.dev>
Fix the regression introduced in 9e30ecf whereby IPv4 broadcast packets were having their ethernet destination field mangled. This broke WOL magic packets and likely other IPv4 broadcast. The regression can be observed by sending an IPv4 WOL packet using the wakeonlan program to any ethernet address: wakeonlan 46:3b:ad:61:e0:5d and capturing the packet with tcpdump: tcpdump -i eth0 -w /tmp/bad.cap dst port 9 The ethernet destination MUST be ff:ff:ff:ff:ff:ff for broadcast, but is mangled with 9e30ecf applied. Revert the change made in 9e30ecf and ensure the MTU value for broadcast routes is retained by calling ip_dst_init_metrics() directly, avoiding the need to enter the main code block in rt_set_nexthop(). Simplify the code path taken for broadcast packets back to the original before the regression, adding only the call to ip_dst_init_metrics(). The broadcast_pmtu.sh selftest provided with the original patch still passes with this patch applied. Fixes: 9e30ecf ("net: ipv4: fix incorrect MTU in broadcast routes") Signed-off-by: Brett A C Sheffield <bacs@librecast.net> Signed-off-by: Michael Aaron Murphy <michael@mmurphy.dev>
Commit 9e30ecf ("net: ipv4: fix incorrect MTU in broadcast routes") introduced a regression where local-broadcast packets would have their gateway set in __mkroute_output, which was caused by fi = NULL being removed. Fix this by resetting the fib_info for local-broadcast packets. This preserves the intended changes for directed-broadcast packets. Cc: stable@vger.kernel.org Fixes: 9e30ecf ("net: ipv4: fix incorrect MTU in broadcast routes") Reported-by: Brett A C Sheffield <bacs@librecast.net> Closes: https://lore.kernel.org/regressions/20250822165231.4353-4-bacs@librecast.net Signed-off-by: Oscar Maes <oscmaes92@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250827062322.4807-1-oscmaes92@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Removes all display modes with more than 240 Hz for the integrated display on a TUXEDO Stellaris 16 Gen7, because using the iGPU with higer refresh rates causes screen flicker. Signed-off-by: Tim Guttzeit <t.guttzeit@tuxedocomputers.com> Co-developed-by: Werner Sembach <wse@tuxedocomputers.com> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14616 Signed-off-by: Tim Crawford <tcrawford@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
This patch fixes suspend issues on RX 5000 GPUs.
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
112 participants
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
This patch fixes suspend issues on RX 5000 GPUs.