warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /home/runner/work/rblog/rblog/target/debug/build/rblog-b2072339f71fc078/out/templates/template_post_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /home/runner/work/rblog/rblog/target/debug/build/rblog-b2072339f71fc078/out/templates/template_disqus_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /home/runner/work/rblog/rblog/target/debug/build/rblog-b2072339f71fc078/out/templates/template_notfound_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /home/runner/work/rblog/rblog/target/debug/build/rblog-b2072339f71fc078/out/templates/template_posts_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /home/runner/work/rblog/rblog/target/debug/build/rblog-b2072339f71fc078/out/templates/template_rss_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /home/runner/work/rblog/rblog/target/debug/build/rblog-b2072339f71fc078/out/templates/template_syntax_highlight_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /home/runner/work/rblog/rblog/target/debug/build/rblog-b2072339f71fc078/out/templates/template_google_analytics_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /home/runner/work/rblog/rblog/target/debug/build/rblog-b2072339f71fc078/out/templates/template_base_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /home/runner/work/rblog/rblog/target/debug/build/rblog-b2072339f71fc078/out/templates/template_giscus_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr = note: `#[warn(clippy::deprecated_clippy_cfg_attr)]` on by default

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /home/runner/work/rblog/rblog/target/debug/build/rblog-b2072339f71fc078/out/templates/template_post_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /home/runner/work/rblog/rblog/target/debug/build/rblog-b2072339f71fc078/out/templates/template_disqus_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /home/runner/work/rblog/rblog/target/debug/build/rblog-b2072339f71fc078/out/templates/template_notfound_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /home/runner/work/rblog/rblog/target/debug/build/rblog-b2072339f71fc078/out/templates/template_posts_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /home/runner/work/rblog/rblog/target/debug/build/rblog-b2072339f71fc078/out/templates/template_rss_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /home/runner/work/rblog/rblog/target/debug/build/rblog-b2072339f71fc078/out/templates/template_syntax_highlight_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /home/runner/work/rblog/rblog/target/debug/build/rblog-b2072339f71fc078/out/templates/template_google_analytics_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /home/runner/work/rblog/rblog/target/debug/build/rblog-b2072339f71fc078/out/templates/template_base_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /home/runner/work/rblog/rblog/target/debug/build/rblog-b2072339f71fc078/out/templates/template_giscus_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr = note: `#[warn(clippy::deprecated_clippy_cfg_attr)]` on by default

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /Users/runner/work/rblog/rblog/target/debug/build/rblog-a86149a97783aee5/out/templates/template_post_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /Users/runner/work/rblog/rblog/target/debug/build/rblog-a86149a97783aee5/out/templates/template_syntax_highlight_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /Users/runner/work/rblog/rblog/target/debug/build/rblog-a86149a97783aee5/out/templates/template_notfound_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /Users/runner/work/rblog/rblog/target/debug/build/rblog-a86149a97783aee5/out/templates/template_posts_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /Users/runner/work/rblog/rblog/target/debug/build/rblog-a86149a97783aee5/out/templates/template_rss_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /Users/runner/work/rblog/rblog/target/debug/build/rblog-a86149a97783aee5/out/templates/template_giscus_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /Users/runner/work/rblog/rblog/target/debug/build/rblog-a86149a97783aee5/out/templates/template_base_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /Users/runner/work/rblog/rblog/target/debug/build/rblog-a86149a97783aee5/out/templates/template_disqus_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /Users/runner/work/rblog/rblog/target/debug/build/rblog-a86149a97783aee5/out/templates/template_google_analytics_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr = note: `#[warn(clippy::deprecated_clippy_cfg_attr)]` on by default

Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions-rs/toolchain@v1, actions-rs/cargo@v1, actions-rs/clippy-check@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

`/home/runner/work/rblog/rblog/.cargo/config` is deprecated in favor of `config.toml`

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

`/home/runner/work/rblog/rblog/.cargo/config` is deprecated in favor of `config.toml`

`/home/runner/work/rblog/rblog/.cargo/config` is deprecated in favor of `config.toml`

`/home/runner/work/rblog/rblog/.cargo/config` is deprecated in favor of `config.toml`

`/home/runner/work/rblog/rblog/.cargo/config` is deprecated in favor of `config.toml`

Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions-rs/toolchain@v1, actions-rs/cargo@v1, actions-rs/clippy-check@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

`/home/runner/work/rblog/rblog/.cargo/config` is deprecated in favor of `config.toml`

`/home/runner/work/rblog/rblog/.cargo/config` is deprecated in favor of `config.toml`

`/home/runner/work/rblog/rblog/.cargo/config` is deprecated in favor of `config.toml`

`/home/runner/work/rblog/rblog/.cargo/config` is deprecated in favor of `config.toml`

`/home/runner/work/rblog/rblog/.cargo/config` is deprecated in favor of `config.toml`

Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions-rs/toolchain@v1, actions-rs/cargo@v1, actions-rs/clippy-check@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

`/Users/runner/work/rblog/rblog/.cargo/config` is deprecated in favor of `config.toml`

`/Users/runner/work/rblog/rblog/.cargo/config` is deprecated in favor of `config.toml`

`/Users/runner/work/rblog/rblog/.cargo/config` is deprecated in favor of `config.toml`

`/Users/runner/work/rblog/rblog/.cargo/config` is deprecated in favor of `config.toml`

`/Users/runner/work/rblog/rblog/.cargo/config` is deprecated in favor of `config.toml`

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /Users/runner/work/rblog/rblog/target/debug/build/rblog-a86149a97783aee5/out/templates/template_post_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /Users/runner/work/rblog/rblog/target/debug/build/rblog-a86149a97783aee5/out/templates/template_syntax_highlight_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /Users/runner/work/rblog/rblog/target/debug/build/rblog-a86149a97783aee5/out/templates/template_notfound_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /Users/runner/work/rblog/rblog/target/debug/build/rblog-a86149a97783aee5/out/templates/template_posts_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /Users/runner/work/rblog/rblog/target/debug/build/rblog-a86149a97783aee5/out/templates/template_rss_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /Users/runner/work/rblog/rblog/target/debug/build/rblog-a86149a97783aee5/out/templates/template_giscus_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /Users/runner/work/rblog/rblog/target/debug/build/rblog-a86149a97783aee5/out/templates/template_base_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /Users/runner/work/rblog/rblog/target/debug/build/rblog-a86149a97783aee5/out/templates/template_disqus_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr

warning: `feature = "cargo-clippy"` was replaced by `clippy` --> /Users/runner/work/rblog/rblog/target/debug/build/rblog-a86149a97783aee5/out/templates/template_google_analytics_html.rs:3:12 | 3 | #[cfg_attr(feature="cargo-clippy", allow(useless_attribute))] | ^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `clippy` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#deprecated_clippy_cfg_attr = note: `#[warn(clippy::deprecated_clippy_cfg_attr)]` on by default

Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions-rs/toolchain@v1, actions-rs/cargo@v1, actions-rs/clippy-check@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

`/Users/runner/work/rblog/rblog/.cargo/config` is deprecated in favor of `config.toml`

`/Users/runner/work/rblog/rblog/.cargo/config` is deprecated in favor of `config.toml`

`/Users/runner/work/rblog/rblog/.cargo/config` is deprecated in favor of `config.toml`

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

`/Users/runner/work/rblog/rblog/.cargo/config` is deprecated in favor of `config.toml`

`/Users/runner/work/rblog/rblog/.cargo/config` is deprecated in favor of `config.toml`

Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions-rs/toolchain@v1, actions-rs/cargo@v1, actions-rs/clippy-check@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

`D:\a\rblog\rblog\.cargo\config` is deprecated in favor of `config.toml`

`D:\a\rblog\rblog\.cargo\config` is deprecated in favor of `config.toml`

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

`D:\a\rblog\rblog\.cargo\config` is deprecated in favor of `config.toml`

`D:\a\rblog\rblog\.cargo\config` is deprecated in favor of `config.toml`