RTB: Benchmarking tool to stress real-time protocols

The idea of RTB is to provide a benchmarking tool to stress test XMPP and MQTT servers with the minimum configuration overhead. Also, at least in the XMPP world, a "golden standard" benchmark is highly demanded in order to compare server implementations, avoiding disambiguations as much as possible. RTB is believed to be used in such role because it has sane defaults (gathered from statistics of real world servers) and it is able to stress test all features defined in the XMPP Compliance Suite 2019

Table of Contents:

Status
System requirements
Compiling
Usage
Database population
1. XMPP scenario
2. MQTT scenario
Configuration

Status

RTB is in an early stage of development with the following limitations:

MQTT support is limited to versions 3.1.1 and 5.0
For XMPP protocol, support for Personal Eventing Protocol is lacking.

Also, "sane" defaults and what should be considered a "golden benchmark" is yet to be discussed within the XMPP and MQTT community.

However, the tool has been already battle-tested: ProcessOne is using the tool to stress test ejabberd SaaS deployments.

System requirements

To compile RTB you need:

Unix-like OS. Windows is not supported. Only Linux is tested.
GNU Make.
GCC
G++
Libexpat ≥ 1.95
Libyaml ≥ 0.1.4
Erlang/OTP ≥ 19.0
OpenSSL ≥ 1.0.0
Zlib ≥ 1.2.3
gnuplot ≥ 4.4

For Debian based distros to install all the dependencies run:

# apt install gcc g++ make libexpat1-dev libyaml-dev libssl-dev \
              zlib1g-dev gnuplot-nox erlang-nox erlang-dev

For Arch Linux:

# pacman -S expat libyaml erlang-nox gnuplot

For other Linux distros, *BSD and OSX:

TODO: Please create an issue/PR if you know the sequence of packages to install.

Compiling

As usual, the following commands are used to obtain and compile the tool:

$ git clone https://github.com/processone/rtb.git
$ cd rtb
$ make

Usage

Once compiled, you will find rtb.sh, rtb.yml.xmpp.example and rtb.yml.mqtt.example files. Copy either rtb.yml.mqtt.example or rtb.yml.xmpp.example to rtb.yml, edit it (see section below) and run:

$ cp rtb.yml.xmpp.example rtb.yml
$ editor rtb.yml
$ ./rtb.sh

Investigate the output of the script for presence of errors. All errors are supposed to be self-explanatory and most of them have some hints on what should be done to fix them.

To stop the benchmark press Ctrl+C+C. In order to start the benchmark in background append -detached switch:

$ ./rtb.sh -detached

You will find logs in the log directory. To monitor the progress open the statistics web page: it's located at http://this.machine.tld:8080 by default. Edit www_port option to change the port if needed.

Database population

During compilation a special utility is created which aims to help you populating the server's database. It's located at priv/bin/rtb_db. Run priv/bin/rtb_db --help to see available options.

XMPP scenario

The utility is able to generate files for users and rosters in either CSV format (ejabberd and jackal) or in Lua format (Metronome/Prosody). In order to generate files for ejabberd execute something like:

$ priv/bin/rtb_db -t ejabberd -c 1000 -u user%@domain.tld -p pass% -r 20

The same, but for Metronome will look like:

$ priv/bin/rtb_db -t metronome -c 1000 -u user%@domain.tld -p pass% -r 20

For Prosody:

$ priv/bin/rtb_db -t prosody -c 1000 -u user%@domain.tld -p pass% -r 20

For jackal:

$ priv/bin/rtb_db -t jackal -c 1000 -u user%@domain.tld -p pass% -r 20

Here 1000 is the total amount of users (must match capacity parameter of the configuration file) and 20 is the number of items in rosters. Don't provide -r option or set it to zero (0) if you don't want to generate rosters.

Follow the hint provided by the utility to load generated files into the server's spool/database. Note that --username and --password arguments must match those defined in the configuration file (see jid and password parameters).

MQTT scenario

The utility is also able to generate passwd file for Mosquitto. In order to generate the file execute something like:

$ priv/bin/rtb_db -t mosquitto -c 1000 -u user% -p pass%

Here 1000 is the total amount of users (must match capacity parameter of the configuration file).

Follow the hint provided by the utility to set up passwd file in Mosquitto configuration.

Note that --username and --password arguments must match those defined in the configuration file (see username and password parameters).

Configuration

All configuration is performed via editing parameters of rtb.yml file. The file has YAML syntax. There are mandatory and optional parameters. The majority of parameters are optional.

General parameters

This group of parameters are common for all scenarios.

Mandatory parameters

scenario: string()

The benchmarking scenario to use. Available values are mqtt and xmpp.
interval: non_neg_integer()

The option is used to set a timeout to wait before spawning the next connection. The value is in milliseconds.
capacity: pos_integer()

The total amount of connections to be spawned, starting from 1.
certfile: string()

A path to a certificate file. The file MUST contain both a full certficate chain and a private key in PEM format.

The option is only mandatory in the case when your scenario is configured to utilize TLS connections.
servers: [uri()]

The list of server URIs to connect. The format of the URI must be scheme://hostname:port/path where scheme can be tcp, tls, ws or wss; hostname can be any DNS name or IP address and port is a port number. Note that scheme, hostname and port parts of the URI are mandatory, where path part is optional and only meaningful when the scheme is ws or wss. IPv6 addresses MUST be enclosed in square brackets. It's highly recommended to use IP addresses in hostname part: excessive DNS lookups may create significant overhead for the benchmarking tool itself.

The option is used to set a transport, address and port of the server(s) being tested.

The option is only mandatory for MQTT scenario, because there are no well established mechanisms to locate MQTT servers.

For XMPP scenario the default is empty list which means server endpoints will be located according to RFC6120 procedure, that is DNS A/AAAA/SRV lookup of a domain part of jid parameter. Leaving the default alone is also not recommended for the reason described above.

An URI from the servers list is picked in round-robin manner during initial connections setup, but it's picked randomly for reconnection attempts.

Note that WebSockets connections are currently supported by MQTT scenario only.

Example:

scenario: mqtt
interval: 10
capacity: 10000
certfile: cert.pem
servers:
  - tls://127.0.0.1:8883
  - tcp://192.168.1.1:1883
  - wss://[::1]:443/mqtt

Optional parameters

bind: [ip_address()]

The list of IP addresses of local interfaces to bind. The typical usage of the option is to set several binding interfaces in order to establish more than 64k outgoing connections from the same machine. The default is empty list: in this case a binding address will be chosen automatically by the OS.
stats_dir: string()

A path to the directory where statistics data will be stored. The files in the directory are used by gnuplot to generate statistics graphs. The default value is stats.
www_dir: string()

A path to a directory where HTML and image files will be created. The default is www. This is used by the statistics web interface.
www_port: pos_integer()

A port number to start the statistics web interface at. The default is 8080.
gnuplot: string()

The path to a gnuplot execution binary. By default RTB is trying to detect the location of gnuplot automatically.
debug: true | false

Whether to log debug messages or not. This is only needed to track down issues of the server or the tool itself. DON'T enable in large scale benchmarking. The default is false.

Example:

bind:
  - 192.168.1.1
  - 192.168.1.2
  - 192.168.1.3
stats_dir: /tmp/rtb/stats
www_dir: /tmp/rtb/www
www_port: 1234
gnuplot: /opt/bin/gnuplot

Parameters of the XMPP scenario

This group of parameters are specific to the XMPP scenario only. The parameters described here are applied per single session.

Mandatory parameters

jid: pattern()

A pattern for an XMPP address: bare or full. If it's bare, the default rtb resource will be used. Refer to Patterns section for the detailed explanation of possible pattern values.
password: pattern()

The pattern for a password. Refer to Patterns section for the detailed explanation of possible pattern values.

Example:

jid: user%@domain.tld
password: pass%

Optional parameters

Parameters for timings control.

negotiation_timeout: pos_integer() | false

A timeout to wait for a stream negotiation to complete. The value is in seconds. It can be set to false to disable timeout. The default is 100 seconds.
connect_timeout: pos_integer() | false

A timeout to wait for a TCP connection to be established. The value is in seconds. It can be set to false to disable timeout. The default is 100 seconds.
reconnect_interval: pos_integer() | false

A timeout to wait before another reconnection attempt after previous connection failure. Initially it is picked randomly between 1 and this configured value. Then, exponential back off is applied between several consecutive connection failures. The value is in seconds. It can be set to false to disable reconnection attempts completely: thus the failed session will never be restored. The default is 60 (1 minute) - the value recommended by RFC6120.
message_interval: pos_integer() | false

An interval between sending messages. The value is in seconds. It can be set to false to disable sending messages completely. The default is 600 (10 minutes). See also message_body_size option.
muc_message_interval: pos_integer() | false

An interval between sending groupchat messages. The value is in seconds. It can be set to false to disable sending groupchat messages completely. The default is 600 (10 minutes). If there are several MUC rooms configured, the groupchat message is sent to a randomly chosen one, i.e. RTB doesn't multicast the message to all joined rooms. See also message_body_size and muc_rooms options. The option doesn't have any effect if muc_rooms option is not set.
presence_interval: pos_integer() | false

An interval between sending presence broadcats. The value is in seconds. It can be set to false to disable sending presences completely. The default is 600 (10 minutes). Note that at the first successful login a presence broadcast is always sent unless the value is not set to false.
disconnect_interval: pos_integer() | false

An interval to wait before forcing disconnect. The value is in seconds. The default is 600 (10 minutes). If stream management is enabled (this is the default, see sm option), then the session will be resumed after a random timeout between 1 and the value of max attribute of <enabled/> element reported by the server. Otherwise, the next reconnection attempt will be performed according to the value and logic of reconnect_interval.
proxy65_interval: pos_integer() | false

An interval between file transfers via Proxy65 service (XEP-0065). The value is in seconds. It can be set to false to disable file transfer completely. The default is 600 (10 minutes). See also proxy65_size option.
http_upload_interval: pos_integer() | false

An interval between file uploads via HTTP Upload service (XEP-0363). The value is in seconds. It can be set to false to disable file uploads completely. The default is 600 (10 minutes). See also http_upload_size option.

Parameters for payload/size control

message_to: pattern()

The pattern of a JID to which messages will be sent. By default a random JID within benchmark capacity is picked (whether it is already connected or not). Refer to Patterns section for the detailed explanation of possible pattern values.

For example, to send messages to already connected JIDs, set:
```
  message_to: user?@domain.tld
```
message_body_size: non_neg_integer()

The size of <body/> element of a message in bytes. Only makes sense when message_interval is not set to false. The default is 100 bytes.
proxy65_size: non_neg_integer()

The size of a file to transfer via Proxy65 service in bytes. Only makes sense when proxy65_interval is not set to false. The default is 10485760 (10 megabytes).
http_upload_size: non_neg_integer()

The size of a file to upload via HTTP Upload service in bytes. Only makes sense when http_upload_interval is not set to false. There is no default value: the option is only needed to set if the service doesn't report its maximum file size.
mam_size: non_neg_integer()

The size of the MAM archive to request from the server. Only makes sense when mam is not set to false. The default is 50 (messages).
muc_mam_size: non_neg_integer()

The size of the MAM archive to request from MUC rooms. Only makes sense when muc_mam is not set to false. The default is 50 (messages).

Parameters for enabling/disabling features

starttls: true | false

Whether to use STARTTLS or not. The default is true.
csi: true | false

Whether to send client state indications or not (XEP-0352). The default is true.
sm: true | false

Whether to enable stream management with resumption or not (XEP-0198). The default is true.
mam: true | false

Whether to enable MAM and request MAM archives at login time or not (XEP-0313). The default is true. The requested size of the archive is controlled by mam_size option.
muc_mam: true | false

Whether to request MAM archives from MUC room or not (XEP-0313). The default is true. The requested size of the archive is controlled by muc_mam_size option.
carbons: true | false

Whether to enable message carbons or not (XEP-0280). The default is true.
blocklist: true | false

Whether to request block list at login time or not (XEP-0191). The default is true.
roster: true | false

Whether to request roster at login time or not. The default is true.
rosterver: true | false

Whether to set a roster version attribute in roster request or not. The default is true.
private: true | false

Whether to request bookmarks from private storage at login time or not (XEP-0049). The default is true.

Miscellaneous parameters

muc_rooms: [pattern()]

A list of MUC room bare JIDs to join, expressed as a pattern. Refer to Patterns section for the detailed explanation of possible pattern values. The default value is an empty list which means no rooms will be joined. Example:
```
muc_rooms:
  - large1@conference.domain.tld
  - medium[1..10]@conference.domain.tld
  - small[1..100]@conference.domain.tld
```
sasl_mechanisms: [string()]

A list of SASL mechanisms to use for authentication. Supported mechanisms are PLAIN and EXTERNAL. The appropriate mechanism will be picked automatically. If several mechanisms found matching then all of them will be tried in the order defined by the value until the authentication is succeed. The default is [PLAIN]. Note that for EXTERNAL authentication you need to have a valid certificate file defined in the certfile option.

Example:

sasl_mechanisms:
  - PLAIN
  - EXTERNAL

Parameters of the MQTT scenario

This group of parameters are specific to the MQTT scenario only. The parameters described here are applied per single session.

Mandatory parameters

client_id: pattern()

A pattern for an MQTT Client ID. Refer to Patterns section for the detailed explanation of possible pattern values.

Example:

client_id: rtb%

Optional parameters

Authentication parameters

username: pattern()

A pattern for a user name. Refer to Patterns section for the detailed explanation of possible pattern values.
password: pattern()

The pattern for a password. Refer to Patterns section for the detailed explanation of possible pattern values.

Example:

username: user%
password: pass%

Parameters for session control

protocol_version: string()

MQTT protocol version. Can be 3.1.1 or 5.0. The default is 3.1.1.
clean_session: true | false

Whether to set CleanSession flag or not. If the value is true then the MQTT session state (subscriptions and message queue) won't be kept at the server between client reconnections and, thus, no state synchronization will be performed when the session is re-established. The default is false.
will: publish_options()

The format of a Client Will. The parameter consists of a list of publish options. See publish parameter description. The default is empty will.

Example:

protocol_version: 5.0
clean_session: true
will:
  qos: 2
  retain: false
  topic: /rtb/?
  message: "*"

Parameters for PUBLISH/SUBSCRIBE

publish: publish_options()

The format of a PUBLISH message. Only makes sense when publish_interval is not set to false. The format is described by a group of sub-options:
- qos: 0..2
  
  Quality of Service. The default is 0.
- retain: true | false
  
  Whether the message should be retained or not. The default is false.
- topic: pattern()
  
  The pattern for a topic. Refer to Patterns section for the detailed explanation of possible pattern values.
- message: pattern() | non_neg_integer()
  
  The pattern or the size of a message payload. If it's an integer then the payload of the given size will be randomly generated every time a message is about to be sent. Refer to Patterns section for the detailed explanation of possible pattern values.
Example:
```
  publish:
    qos: 1
    retain: true
    topic: /rtb/?
    message: 32
```
subscribe: [{pattern(), 0..2}]

The format of a SUBSCRIBE message. It is represented as a list of topic-filter/QoS pairs. Refer to Patterns section for the detailed explanation of possible pattern values. The message is sent immediately after successful authentication of a newly created session. The default is empty list, i.e. no SUBSCRIBE messages will be sent.

Example:
```
  subscribe:
    /foo/bar/%: 2
    $SYS/#: 1
    /rtb/[1..10]: 0
```
track_publish_delivery: true | false

Check if PUBLISH packets reach at least a single destination client. The result is displayed as publish-loss graph in the Web statistics interface. The default is false.

NOTE: the option is only available for MQTT 5.0. See protocol_version option.

Parameters for timings control

keep_alive: pos_integer()

The interval to send keep-alive pings. The value is in seconds. The default is 60 (seconds).
reconnect_interval: pos_integer() | false

A timeout to wait before another reconnection attempt after previous connection failure. Initially it is picked randomly between 1 and this configured value. Then, exponential back off is applied between several consecutive connection failures. The value is in seconds. It can be set to false to disable reconnection attempts completely: thus the failed session will never be restored. The default is 60 (1 minute).
disconnect_interval: pos_integer() | false

An interval to wait before forcing disconnect. The value is in seconds. The default is 600 (10 minutes). The next reconnection attempt will be performed according to the value and logic of reconnect_interval.
publish_interval: pos_integer() | false

An interval between sending PUBLISH messages. Can be set to false in order to disable sending PUBLISH messages completely. The value is in seconds. The default is 600 (10 minutes).

Patterns

Many configuration options allow to set patterns as their values. The pattern is just a regular string with a special treatment of symbols %, *, ?, [ and ].

Current connection identifier

The symbol '%' is replaced by the current identifier of the connection. For example, when the pattern of username parameter is user% and the value of capacity is 5, then the value of username will be evaluated into user1 for first connection (i.e. the connection with identifier 1), user2 for the second connection and user5 for the last connection. Patterns with such identifier are supposed to address a connection within which this pattern is evaluated.

Example:

jid: user%@domain.tld
client_id: client%
password: pass%

Random session identifier

The symbol '?' is replaced by an identifier of random available session. For example, when there are already spawned 5 connections with 1,3 and 5 connections being fully established (and, thus, internally registered as a "session"), the pattern user? will yield into user1, user3 or user5, but not into user2 or user4. Patterns with such identifier are supposed to be used for sending/publishing messages to online users.

Example:

message_to: user?@domain.tld
publish:
  ...
  topic: /rtb/topic?
  ...

Unique identifier

The symbol '*' is replaced by a positive integer. The integer is guaranteed to be unique within the benchmark lifetime. Note that the integer is not guaranteed to be monotonic. Patterns with such identifiers are supposed to be used to mark some content as unique for further tracking (in logs or network dump).

Example:

publish:
  topic: /foo/bar
  ...
  message: "*"

Range identifier

The expression [X..Y] where X and Y are non-negative integers and X ≤ Y is replaced by a random integer between X and Y (inclusively). Patterns with such expression are supposed to be used for sending/publishing/subscribing to a restricted subset of recipients or topics.

Example:

subscribe:
  /rtb/topic/[1..10]: 2
publish:
  topic: /rtb/topic/[1..10]
muc_rooms:
  - room[1..5]@conference.domain.tld

Name		Name	Last commit message	Last commit date
Latest commit History 137 Commits
c_src		c_src
img		img
include		include
plugins		plugins
src		src
CODE_OF_CONDUCT.md		CODE_OF_CONDUCT.md
CONTRIBUTING.md		CONTRIBUTING.md
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
cert.pem		cert.pem
rebar		rebar
rebar.config		rebar.config
rtb.sh		rtb.sh
rtb.yml.mqtt.example		rtb.yml.mqtt.example
rtb.yml.xmpp.example		rtb.yml.xmpp.example

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

RTB: Benchmarking tool to stress real-time protocols

Status

System requirements

Compiling

Usage

Database population

XMPP scenario

MQTT scenario

Configuration

General parameters

Mandatory parameters

Optional parameters

Parameters of the XMPP scenario

Mandatory parameters

Optional parameters

Parameters for timings control.

Parameters for payload/size control

Parameters for enabling/disabling features

Miscellaneous parameters

Parameters of the MQTT scenario

Mandatory parameters

Optional parameters

Authentication parameters

Parameters for session control

Parameters for PUBLISH/SUBSCRIBE

Parameters for timings control

Patterns

Current connection identifier

Random session identifier

Unique identifier

Range identifier

About

Releases

Packages

Contributors 5

Languages

License

processone/rtb

Folders and files

Latest commit

History

Repository files navigation

RTB: Benchmarking tool to stress real-time protocols

Status

System requirements

Compiling

Usage

Database population

XMPP scenario

MQTT scenario

Configuration

General parameters

Mandatory parameters

Optional parameters

Parameters of the XMPP scenario

Mandatory parameters

Optional parameters

Parameters for timings control.

Parameters for payload/size control

Parameters for enabling/disabling features

Miscellaneous parameters

Parameters of the MQTT scenario

Mandatory parameters

Optional parameters

Authentication parameters

Parameters for session control

Parameters for PUBLISH/SUBSCRIBE

Parameters for timings control

Patterns

Current connection identifier

Random session identifier

Unique identifier

Range identifier

About

Topics

Resources

License

Code of conduct

Stars

Watchers

Forks

Releases

Packages 0

Contributors 5

Languages

Packages