Speed improvements, start gcode changes, added HIPS filament.

#8762

resources/profiles/gCreate.idx

@@ -1,3 +1,4 @@
 min_slic3r_version = 2.4.0-alpha0
+1.0.1 Speed improvements, start gcode changes, added HIPS filament.
 1.0.0 Initial version
 

resources/profiles/gCreate.ini

@@ -1,14 +1,14 @@
 # Print profiles for the gCreate printers.
 #
-# GTL Modified 210706 (at gCreate Shop)
-#
+# GTL Modified 220825 (at gCreate Shop)
+# Speed improvements, start/end gCode changes
 
 [vendor]
 # Vendor name will be shown by the Config Wizard.
 name = gCreate
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.0.0
+config_version = 1.0.1
 # Where to get the updates from?
 config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/gCreate/
 # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
@@ -548,6 +548,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/
 # Common filament preset across all PLA filaments
 [filament:*PLA*]
 inherits = *common*
+extrusion_multiplier = 0.94
 bed_temperature = 60
 fan_below_layer_time = 15
 filament_colour = #FF3232
@@ -749,11 +750,20 @@ filament_vendor = ProtoPasta
 temperature = 250
 bed_temperature = 70
 
+[filament:Generic HIPS @GCREATE]
+inherits = *PET*
+filament_vendor = Generic
+filament_density = 1.04
+temperature = 230
+first_layer_temperature = 235
+bed_temperature = 100
+first_layer_bed_temperature = 100
+filament_type = HIPS
+
 [filament:Generic TPU 90A @GCREATE]
 inherits = *TPU90A*
 filament_vendor = Generic
 
-
 [filament:Generic CF PETG @GCREATE]
 inherits = *CFPETG*
 filament_vendor = Generic
@@ -770,8 +780,6 @@ filament_vendor = Generic
 inherits = *WOODFILLPLA*
 filament_vendor = ColorFabb
 
-
-
 [filament:Generic PVA @GCREATE - PLA and PVA Support]
 bed_temperature = 0
 bridge_fan_speed = 75
@@ -830,8 +838,8 @@ machine_max_feedrate_x = 500
 machine_max_feedrate_y = 500
 machine_max_feedrate_z = 10
 machine_max_jerk_e = 2.5
-machine_max_jerk_x = 3
-machine_max_jerk_y = 3
+machine_max_jerk_x = 10
+machine_max_jerk_y = 10
 machine_max_jerk_z = 0.4
 machine_min_extruding_rate = 0
 machine_min_travel_rate = 0
@@ -893,7 +901,7 @@ retract_speed = 70
 deretract_speed = 40
 retract_before_wipe = 70%
 default_print_profile = 0.20mm - Standard Layers @GCREATE
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG92 E0.0
+start_gcode = M420 Z20\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG92 E0.0
 end_gcode = M104 S0 T0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+5, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F3000 ; present print\n{if layer_z < max_print_height-10}G1 Z{z_offset+min(layer_z+70, max_print_height-10)} F600{endif} ; Move print head up\nM84 X Y E ; disable motors
 
 #[printer:*abl*]
@@ -906,6 +914,7 @@ printer_model = GMAX2PRO
 max_layer_height = 0.7
 min_layer_height = 0.08
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_GCREATE\nPRINTER_MODEL_GMAX2PRO
+start_gcode = G90\nG28\nM420 Z20\nG1 Z5 F5000
 bed_shape = 0x0,457x0,457x457,0x457
 max_print_height = 610
 
@@ -929,7 +938,7 @@ printer_model = GMAX2DUAL2IN1
 max_layer_height = 0.7
 min_layer_height = 0.08
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_GCREATE\nPRINTER_MODEL_GMAX2DUAL2IN1
-start_gcode = G90 ;\n G28 ;\n G1 Z5 F5000
+start_gcode = G90\nG28\nM420 Z20\nG1 Z5 F5000
 bed_shape = 0x0,457x0,457x457,0x457
 max_print_height = 610
 default_print_profile = 0.20mm - Standard Layers @GCREATE
@@ -951,7 +960,7 @@ printer_model = GMAX2DUAL
 max_layer_height = 0.7
 min_layer_height = 0.08
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_GCREATE\nPRINTER_MODEL_GMAX2DUAL
-start_gcode = G90\nG28\nG1 Z5 F5000\nM218 T1 X20 Y0 ; Set second extruder offset
+start_gcode = G90\nG28\nM420 Z20\nG1 Z5 F5000\nM218 T1 X20 Y0 ; Set second extruder offset
 end_gcode = M104 S0 T0 ; turn off temperature\nM104 S0 T1 ; turn off 2nd extruder\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+5, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F3000 ; present print\n{if layer_z < max_print_height-10}G1 Z{z_offset+min(layer_z+70, max_print_height-10)} F600{endif} ; Move print head up\nM84 X Y E ; disable motors
 bed_shape = 0x0,457x0,457x457,0x457
 max_print_height = 610