added resources for Anycubic Photon Mono and Photon Mono 4K printers

resources/profiles/Anycubic.ini

@@ -73,13 +73,28 @@ technology = FFF
 family = PREDATOR
 default_materials = Generic PLA @PREDATOR; Generic PETG @PREDATOR; Generic ABS @PREDATOR
 
-[printer_model:PHOTON MONO X]
+[printer_model:PHOTON_MONO_X]
 name = Photon Mono X
 variants = default
 technology = SLA
 family = PHOTON MONO
 default_materials = Generic Blue Resin @MONO 0.05
 
+[printer_model:PHOTON_MONO]
+name = Photon Mono
+variants = default
+technology = SLA
+family = PHOTON MONO
+default_materials = Generic Blue Resin @MONO 0.05
+
+[printer_model:PHOTON_MONO_4K]
+name = Photon Mono 4K
+variants = default
+technology = SLA
+family = PHOTON MONO
+default_materials = Generic Blue Resin @MONO 0.05
+
+
 # All presets starting with asterisk, for example *common*, are intermediate and they will
 # not make it into the user interface.
 
@@ -2243,9 +2258,7 @@ z_offset = 0
 ########## SLA printer presets ##########
 
 [sla_print:*common print ANYCUBIC SLA*]
-compatible_printers_condition = printer_notes=~/.*PHOTONMONOX.*/
 layer_height = 0.05
-output_filename_format = [input_filename_base].pwmx
 pad_edge_radius = 0.5
 pad_enable = 0
 pad_max_merge_distance = 50
@@ -2273,18 +2286,36 @@ support_small_pillar_diameter_percent = 60%
 
 [sla_print:0.05 Normal @ANYCUBIC]
 inherits = *common print ANYCUBIC SLA*
+compatible_printers_condition = printer_notes=~/.*ABSTRACT_ONLY.*/
 layer_height = 0.05
 
+[sla_print:0.05 PhotonMono @ANYCUBIC]
+inherits = 0.05 Normal @ANYCUBIC
+compatible_printers_condition = printer_notes=~/.*PHOTONMONO2K.*/
+output_filename_format = [input_filename_base].pwmo
+
+[sla_print:0.05 PhotonMono4K @ANYCUBIC]
+inherits = 0.05 Normal @ANYCUBIC
+compatible_printers_condition = printer_notes=~/.*PHOTONMONO4K.*/
+output_filename_format = [input_filename_base].pwma
+
+
+[sla_print:0.05 PhotonMonoX @ANYCUBIC]
+inherits = 0.05 Normal @ANYCUBIC
+compatible_printers_condition = printer_notes=~/.*PHOTONMONOX4K.*/
+output_filename_format = [input_filename_base].pwmx
+
+
 ########### Materials
 
 [sla_material:*common ANYCUBIC SLA*]
-compatible_printers_condition = printer_notes=~/.*PHOTONMONOX.*/
+compatible_printers_condition = printer_notes=~/.*PHOTONMONO.*/
 compatible_prints_condition = layer_height == 0.05
 exposure_time = 7
 initial_exposure_time = 40
 initial_layer_height = 0.05
 material_correction = 1,1,1
-material_notes = LIFT_DISTANCE=8.0\nLIFT_SPEED=2.5\nRETRACT_SPEED=3.0\nBOTTOM_LIFT_SPEED=2.0\nBOTTOM_LIFT_DISTANCE=9.0\nDELAY_BEFORE_EXPOSURE=0.5
+material_notes = #Distances are defined in mm, speeds are defined in mm/s.\n#Delay is defined in s.\nLIFT_DISTANCE=8.0\nLIFT_SPEED=2.5\nRETRACT_SPEED=3.0\nBOTTOM_LIFT_SPEED=2.0\nBOTTOM_LIFT_DISTANCE=9.0\nDELAY_BEFORE_EXPOSURE=0.5
 
 [sla_material:*common 0.05 ANYCUBIC SLA*]
 inherits = *common ANYCUBIC SLA*
@@ -2296,16 +2327,16 @@ initial_exposure_time = 40
 material_type = Tough
 material_vendor = Generic
 material_colour = #6080EC
-compatible_printers_condition = printer_notes=~/.*PHOTONMONOX.*/
+compatible_printers_condition = printer_notes=~/.*PHOTONMONO.*/
 
 ########## Printers
 
 [printer:Anycubic Photon Mono X]
 printer_technology = SLA
-printer_model = PHOTON MONO X
+printer_model = PHOTON_MONO_X
 printer_variant = default
 default_sla_material_profile = Generic Blue Resin @MONO 0.05
-default_sla_print_profile = 0.05 Normal @ANYCUBIC
+default_sla_print_profile = 0.05 PhotonMonoX @ANYCUBIC
 thumbnails = 224x168
 sla_archive_format = pwmx
 bed_shape = 1.48x1.02,193.48x1.02,193.48x121.02,1.48x121.02
@@ -2326,4 +2357,60 @@ max_initial_exposure_time = 300
 printer_correction = 1,1,1
 gamma_correction = 1
 area_fill = 45
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.'\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTONMONOX\n
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.'\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTONMONOX4K\n
+
+[printer:Anycubic Photon Mono]
+printer_technology = SLA
+printer_model = PHOTON_MONO
+printer_variant = default
+default_sla_material_profile = Generic Blue Resin @MONO 0.05
+default_sla_print_profile = 0.05 PhotonMono @ANYCUBIC
+thumbnails = 224x168
+sla_archive_format = pwmx
+bed_shape = 0x0,130.56x0,130.56x82.62,0x82.62
+display_height = 82.62
+display_orientation = portrait
+display_mirror_x = 1
+display_mirror_y = 0
+display_pixels_x = 2560
+display_pixels_y = 1620
+display_width = 130.56
+max_print_height = 165
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+min_exposure_time = 1
+max_exposure_time = 120
+min_initial_exposure_time = 1
+max_initial_exposure_time = 300
+printer_correction = 1,1,1
+gamma_correction = 1
+area_fill = 45
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.'\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTONMONO2K\n
+
+[printer:Anycubic Photon Mono 4K]
+printer_technology = SLA
+printer_model = PHOTON_MONO_4K
+printer_variant = default
+default_sla_material_profile = Generic Blue Resin @MONO 0.05
+default_sla_print_profile = 0.05 PhotonMono4K @ANYCUBIC
+thumbnails = 224x168
+sla_archive_format = pwmx
+bed_shape = 0x0,132.90x0,132.90x80.00,0x80.00
+display_height = 80
+display_orientation = landscape
+display_mirror_x = 1
+display_mirror_y = 0
+display_pixels_x = 3840
+display_pixels_y = 2400
+display_width = 132.9
+max_print_height = 165
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+min_exposure_time = 1
+max_exposure_time = 120
+min_initial_exposure_time = 1
+max_initial_exposure_time = 300
+printer_correction = 1,1,1
+gamma_correction = 1
+area_fill = 45
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.'\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTONMONO4K\nPRINTER_EXPORT_PWM_VER=516\nPRINTER_EXPORT_PWM_NAME=Photon__Mono__4K\n