`--cov-fail-under` should not cause `pytest --collect-only` to fail #511

Zac-HD · 2021-12-11T14:06:01Z

I often have --cov-fail-under=100 set from a config file, because I expect full coverage from running my tests.

With HypoFuzz, however, I use pytest --collect-only to collect the tests and then run them with the fuzzer... but --cov-fail-under returns an error because collection didn't reach 100% coverage! That seems pretty silly, so this patch makes us skip the coverage check if pytest is running in --collect-only mode. Fixes #426.

(I can hypothesis fuzz -- --cov-fail-under=0 for now, but that's a pretty inelegant workaround which I'd rather not require of my users)

ionelmc

Looks good.

Zac-HD · 2022-07-12T19:27:46Z

@ionelmc - is there anything I can do to help get this released?

I've just had a couple of complaints from users which I eventually traced back to this, and then worked out that I'd already made a PR. But it doesn't help anyone until it's released 😭

4662: Update pytest-mock requirement from ~=3.8.2 to ~=3.9.0 r=jenshnielsen a=dependabot[bot] Updates the requirements on [pytest-mock](https://github.com/pytest-dev/pytest-mock) to permit the latest version. <details> <summary>Release notes</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-mock/releases">pytest-mock's releases</a>. <blockquote> <h2>v3.9.0</h2> <h1>Releases</h1> <h2>3.9.0 (2022-09-28)</h2> <ul> <li>Expose <code>NonCallableMagicMock</code> via the <code>mocker</code> fixture (<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-mock/pull/318">#318</a>).</li> </ul> <h2>3.8.2 (2022-07-05)</h2> <ul> <li>Fixed <code>AsyncMock</code> support for Python 3.7+ in <code>mocker.async_stub</code> (<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-mock/pull/302">#302</a>).</li> </ul> <h2>3.8.1 (2022-06-24)</h2> <ul> <li>Fixed regression caused by an explicit <code>mock</code> dependency in the code (<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-mock/issues/298">#298</a>).</li> </ul> <h2>3.8.0 (2022-06-24)</h2> <ul> <li>Add <code>MockerFixture.async_mock</code> method. Thanks <a href="https://github.com/PerchunPak"><code>`@PerchunPak</code></a>` for the PR (<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-mock/pull/296">#296</a>).</li> </ul> <h2>3.7.0 (2022-01-28)</h2> <ul> <li>Python 3.10 now officially supported.</li> <li>Dropped support for Python 3.6.</li> </ul> <h2>3.6.1 (2021-05-06)</h2> <ul> <li>Fix <code>mocker.resetall()</code> when using <code>mocker.spy()</code> (<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-mock/issues/237">#237</a>). Thanks <a href="https://github.com/blaxter"><code>`@blaxter</code></a>` for the report and <a href="https://github.com/shadycuz"><code>`@shadycuz</code></a>` for the PR.</li> </ul> <h2>3.6.0 (2021-04-24)</h2> <ul> <li>pytest-mock no longer supports Python 3.5.</li> <li>Correct type annotations for <code>mocker.patch.object</code> to also include the string form. Thanks <a href="https://github.com/plannigan"><code>`@plannigan</code></a>` for the PR (<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-mock/pull/235">#235</a>).</li> <li><code>reset_all</code> now supports <code>return_value</code> and <code>side_effect</code> keyword arguments. Thanks <a href="https://github.com/alex-marty"><code>`@alex-marty</code></a>` for the PR (<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-mock/pull/214">#214</a>).</li> </ul> <h2>3.5.1 (2021-01-10)</h2> <ul> <li>Use <code>inspect.getattr_static</code> instead of resorting to <code>object.__getattribute__</code> magic. This should better comply with objects which implement a custom descriptor protocol. Thanks <a href="https://github.com/yesthesoup"><code>`@yesthesoup</code></a>` for the PR (<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-mock/pull/224">#224</a>).</li> </ul>  </blockquote> ... (truncated) </details> <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-mock/blob/main/CHANGELOG.rst">pytest-mock's changelog</a>. <blockquote> <h2>3.9.0 (2022-09-28)</h2> <ul> <li>Expose <code>NonCallableMagicMock</code> via the <code>mocker</code> fixture (<code>[#318](https://github.com/pytest-dev/pytest-mock/issues/318)</code>_).</li> </ul> .. _<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-mock/issues/318">#318</a>: <a href="https://github-redirect.dependabot.com/pytest-dev/pytest-mock/pull/318">pytest-dev/pytest-mock#318</a> <h2>3.8.2 (2022-07-05)</h2> <ul> <li>Fixed <code>AsyncMock</code> support for Python 3.7+ in <code>mocker.async_stub</code> (<code>[#302](https://github.com/pytest-dev/pytest-mock/issues/302)</code>_).</li> </ul> .. _<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-mock/issues/302">#302</a>: <a href="https://github-redirect.dependabot.com/pytest-dev/pytest-mock/pull/302">pytest-dev/pytest-mock#302</a> <h2>3.8.1 (2022-06-24)</h2> <ul> <li>Fixed regression caused by an explicit <code>mock</code> dependency in the code (<code>[#298](https://github.com/pytest-dev/pytest-mock/issues/298)</code>_).</li> </ul> .. _<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-mock/issues/298">#298</a>: <a href="https://github-redirect.dependabot.com/pytest-dev/pytest-mock/issues/298">pytest-dev/pytest-mock#298</a> <h2>3.8.0 (2022-06-24)</h2> <ul> <li>Add <code>MockerFixture.async_mock</code> method. Thanks <code>`@PerchunPak</code>_` for the PR (<code>[#296](https://github.com/pytest-dev/pytest-mock/issues/296)</code>_).</li> </ul> .. _<a href="https://github.com/PerchunPak"><code>`@PerchunPak</code></a>:` <a href="https://github.com/PerchunPak">https://github.com/PerchunPak</a> .. _<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-mock/issues/296">#296</a>: <a href="https://github-redirect.dependabot.com/pytest-dev/pytest-mock/pull/296">pytest-dev/pytest-mock#296</a> <h2>3.7.0 (2022-01-28)</h2> <ul> <li>Python 3.10 now officially supported.</li> <li>Dropped support for Python 3.6.</li> </ul> <h2>3.6.1 (2021-05-06)</h2> <ul> <li>Fix <code>mocker.resetall()</code> when using <code>mocker.spy()</code> (<code>[#237](https://github.com/pytest-dev/pytest-mock/issues/237)</code>). Thanks <code>`@blaxter</code>` for the report and <code>`@shadycuz</code>_` for the PR.</li> </ul> .. _<a href="https://github.com/blaxter"><code>`@blaxter</code></a>:` <a href="https://github.com/blaxter">https://github.com/blaxter</a> .. _<a href="https://github.com/shadycuz"><code>`@shadycuz</code></a>:` <a href="https://github.com/shadycuz">https://github.com/shadycuz</a> .. _<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-mock/issues/237">#237</a>: <a href="https://github-redirect.dependabot.com/pytest-dev/pytest-mock/issues/237">pytest-dev/pytest-mock#237</a> <h2>3.6.0 (2021-04-24)</h2> <ul> <li> pytest-mock no longer supports Python 3.5. </li> <li> Correct type annotations for <code>mocker.patch.object</code> to also include the string form. </li> </ul>  </blockquote> ... (truncated) </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-mock/commit/64a34f64215d779dc0384acc3cdd5a164544a60a"><code>64a34f6</code></a> Update CHANGELOG for 3.9.0</li> <li><a href="https://github.com/pytest-dev/pytest-mock/commit/4e31630aad7dca66258f232e6b62754dadd79f2b"><code>4e31630</code></a> Add test for NonCallableMagicMock</li> <li><a href="https://github.com/pytest-dev/pytest-mock/commit/247b9d46e6fdfc696257c4daade9c08a195c45aa"><code>247b9d4</code></a> Expose NonCallableMagicMock in MockerFixture</li> <li><a href="https://github.com/pytest-dev/pytest-mock/commit/0fd7fea3eece2e2dd09affeed39f0e3a50295f0d"><code>0fd7fea</code></a> Update link to notes about usage as context manager (<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-mock/issues/313">#313</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-mock/commit/903b97283d1c8271596d748a9a8eef5038f96bb6"><code>903b972</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/pytest-dev/pytest-mock/issues/311">#311</a> from pytest-dev/pre-commit-ci-update-config</li> <li><a href="https://github.com/pytest-dev/pytest-mock/commit/a5a33ac9461e469736ed0d2ceae135f2cfb3fad0"><code>a5a33ac</code></a> [pre-commit.ci] pre-commit autoupdate</li> <li><a href="https://github.com/pytest-dev/pytest-mock/commit/d01b267622b8ae21f977115edc624638da0f2508"><code>d01b267</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/pytest-dev/pytest-mock/issues/309">#309</a> from pytest-dev/pre-commit-ci-update-config</li> <li><a href="https://github.com/pytest-dev/pytest-mock/commit/736f2ab0caa4a51544627773818d1ef4822ab31c"><code>736f2ab</code></a> [pre-commit.ci] pre-commit autoupdate</li> <li><a href="https://github.com/pytest-dev/pytest-mock/commit/59b60cb85116016e2e5e458d00b8ca3c5b267178"><code>59b60cb</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/pytest-dev/pytest-mock/issues/308">#308</a> from juliangilbey/add-static-dir</li> <li><a href="https://github.com/pytest-dev/pytest-mock/commit/305e0829c4100d1316dd30e91d978e56602cf893"><code>305e082</code></a> Add docs/_static directory to allow sphinx-build to work without warnings</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-mock/compare/v3.8.2...v3.9.0">compare view</a></li> </ul> </details> You can trigger a rebase of this PR by commenting ``@dependabot` rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - ``@dependabot` rebase` will rebase this PR - ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it - ``@dependabot` merge` will merge this PR after your CI passes on it - ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it - ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging - ``@dependabot` reopen` will reopen this PR if it is closed - ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> 4663: Update pytest-cov requirement from ~=3.0.0 to ~=4.0.0 r=jenshnielsen a=dependabot[bot] Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing parallel = true sigterm = true </li> <li> Fixed deprecation in <code>setup.py</code> by trying to import setuptools before distutils. Contributed by Ben Greiner in <code>[#545](pytest-dev/pytest-cov#545) <https://github.com/pytest-dev/pytest-cov/pull/545></code>_. </li> <li> Removed undesirable new lines that were displayed while reporting was disabled. Contributed by Delgan in <code>[#540](pytest-dev/pytest-cov#540) <https://github.com/pytest-dev/pytest-cov/pull/540></code>_. </li> <li> Documentation fixes. Contributed by Andre Brisco in <code>[#543](pytest-dev/pytest-cov#543) <https://github.com/pytest-dev/pytest-cov/pull/543></code>_ and Colin O'Dell in <code>[#525](pytest-dev/pytest-cov#525) <https://github.com/pytest-dev/pytest-cov/pull/525></code>_. </li> <li> Added support for LCOV output format via <code>--cov-report=lcov</code>. Only works with coverage 6.3+. Contributed by Christian Fetzer in <code>[#536](pytest-dev/pytest-cov#536) <https://github.com/pytest-dev/pytest-cov/issues/536></code>_. </li> <li> Modernized pytest hook implementation. Contributed by Bruno Oliveira in <code>[#549](pytest-dev/pytest-cov#549) <https://github.com/pytest-dev/pytest-cov/pull/549></code>_ and Ronny Pfannschmidt in <code>[#550](pytest-dev/pytest-cov#550) <https://github.com/pytest-dev/pytest-cov/pull/550></code>_. </li> </ul> <h2>3.0.0 (2021-10-04)</h2> Note that this release drops support for Python 2.7 and Python 3.5. <ul> <li>Added support for Python 3.10 and updated various test dependencies. Contributed by Hugo van Kemenade in <code>[#500](pytest-dev/pytest-cov#500) <https://github.com/pytest-dev/pytest-cov/pull/500></code>_.</li> <li>Switched from Travis CI to GitHub Actions. Contributed by Hugo van Kemenade in <code>[#494](pytest-dev/pytest-cov#494) <https://github.com/pytest-dev/pytest-cov/pull/494></code>_ and <code>[#495](pytest-dev/pytest-cov#495) <https://github.com/pytest-dev/pytest-cov/pull/495></code>_.</li> <li>Add a <code>--cov-reset</code> CLI option. Contributed by Danilo Šegan in <code>[#459](pytest-dev/pytest-cov#459) <https://github.com/pytest-dev/pytest-cov/pull/459></code>_.</li> <li>Improved validation of <code>--cov-fail-under</code> CLI option. Contributed by ... Ronny Pfannschmidt's desire for skark in <code>[#480](pytest-dev/pytest-cov#480) <https://github.com/pytest-dev/pytest-cov/pull/480></code>_.</li> <li>Dropped Python 2.7 support.</li> </ul>  </blockquote> ... (truncated) </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/28db055bebbf3ee016a2144c8b69dd7b80b48cc5"><code>28db055</code></a> Bump version: 3.0.0 → 4.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/57e9354a86f658556fe6f15f07625c4b9a9ddf53"><code>57e9354</code></a> Really update the changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/56b810b91c9ae15d1462633c6a8a1b522ebf8e65"><code>56b810b</code></a> Update chagelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/f7fced579e36b72b57e14768026467e4c4511a40"><code>f7fced5</code></a> Add support for LCOV output</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1211d3134bb74abb7b00c3c2209091aaab440417"><code>1211d31</code></a> Fix flake8 error</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b077753f5d9d200815fe500d0ef23e306784e65b"><code>b077753</code></a> Use modern approach to specify hook options</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/00713b3fec90cb8c98a9e4bfb3212e574c08e67b"><code>00713b3</code></a> removed incorrect docs on <code>data_file</code>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b3dda36fddd3ca75689bb3645cd320aa8392aaf3"><code>b3dda36</code></a> Improve workflow with a collecting status check. (<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-cov/issues/548">#548</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/218419f665229d61356f1eea3ddc8e18aa21f87c"><code>218419f</code></a> Prevent undesirable new lines to be displayed when report is disabled</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/60b73ec673c60942a3cf052ee8a1fdc442840558"><code>60b73ec</code></a> migrate build command from distutils to setuptools</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v3.0.0...v4.0.0">compare view</a></li> </ul> </details> You can trigger a rebase of this PR by commenting ``@dependabot` rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - ``@dependabot` rebase` will rebase this PR - ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it - ``@dependabot` merge` will merge this PR after your CI passes on it - ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it - ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging - ``@dependabot` reopen` will reopen this PR if it is closed - ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 3.0.0 to 4.0.0. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing parallel = true sigterm = true </li> <li> Fixed deprecation in <code>setup.py</code> by trying to import setuptools before distutils. Contributed by Ben Greiner in <code>[#545](pytest-dev/pytest-cov#545) <https://github.com/pytest-dev/pytest-cov/pull/545></code>_. </li> <li> Removed undesirable new lines that were displayed while reporting was disabled. Contributed by Delgan in <code>[#540](pytest-dev/pytest-cov#540) <https://github.com/pytest-dev/pytest-cov/pull/540></code>_. </li> <li> Documentation fixes. Contributed by Andre Brisco in <code>[#543](pytest-dev/pytest-cov#543) <https://github.com/pytest-dev/pytest-cov/pull/543></code>_ and Colin O'Dell in <code>[#525](pytest-dev/pytest-cov#525) <https://github.com/pytest-dev/pytest-cov/pull/525></code>_. </li> <li> Added support for LCOV output format via <code>--cov-report=lcov</code>. Only works with coverage 6.3+. Contributed by Christian Fetzer in <code>[#536](pytest-dev/pytest-cov#536) <https://github.com/pytest-dev/pytest-cov/issues/536></code>_. </li> <li> Modernized pytest hook implementation. Contributed by Bruno Oliveira in <code>[#549](pytest-dev/pytest-cov#549) <https://github.com/pytest-dev/pytest-cov/pull/549></code>_ and Ronny Pfannschmidt in <code>[#550](pytest-dev/pytest-cov#550) <https://github.com/pytest-dev/pytest-cov/pull/550></code>_. </li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/28db055bebbf3ee016a2144c8b69dd7b80b48cc5"><code>28db055</code></a> Bump version: 3.0.0 → 4.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/57e9354a86f658556fe6f15f07625c4b9a9ddf53"><code>57e9354</code></a> Really update the changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/56b810b91c9ae15d1462633c6a8a1b522ebf8e65"><code>56b810b</code></a> Update chagelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/f7fced579e36b72b57e14768026467e4c4511a40"><code>f7fced5</code></a> Add support for LCOV output</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1211d3134bb74abb7b00c3c2209091aaab440417"><code>1211d31</code></a> Fix flake8 error</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b077753f5d9d200815fe500d0ef23e306784e65b"><code>b077753</code></a> Use modern approach to specify hook options</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/00713b3fec90cb8c98a9e4bfb3212e574c08e67b"><code>00713b3</code></a> removed incorrect docs on <code>data_file</code>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b3dda36fddd3ca75689bb3645cd320aa8392aaf3"><code>b3dda36</code></a> Improve workflow with a collecting status check. (<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-cov/issues/548">#548</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/218419f665229d61356f1eea3ddc8e18aa21f87c"><code>218419f</code></a> Prevent undesirable new lines to be displayed when report is disabled</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/60b73ec673c60942a3cf052ee8a1fdc442840558"><code>60b73ec</code></a> migrate build command from distutils to setuptools</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v3.0.0...v4.0.0">compare view</a></li> </ul> </details> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=3.0.0&new-version=4.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

…-ds-runner (#126) Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 3.0.0 to 4.0.0. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing parallel = true sigterm = true </li> <li> Fixed deprecation in <code>setup.py</code> by trying to import setuptools before distutils. Contributed by Ben Greiner in <code>[#545](pytest-dev/pytest-cov#545) <https://github.com/pytest-dev/pytest-cov/pull/545></code>_. </li> <li> Removed undesirable new lines that were displayed while reporting was disabled. Contributed by Delgan in <code>[#540](pytest-dev/pytest-cov#540) <https://github.com/pytest-dev/pytest-cov/pull/540></code>_. </li> <li> Documentation fixes. Contributed by Andre Brisco in <code>[#543](pytest-dev/pytest-cov#543) <https://github.com/pytest-dev/pytest-cov/pull/543></code>_ and Colin O'Dell in <code>[#525](pytest-dev/pytest-cov#525) <https://github.com/pytest-dev/pytest-cov/pull/525></code>_. </li> <li> Added support for LCOV output format via <code>--cov-report=lcov</code>. Only works with coverage 6.3+. Contributed by Christian Fetzer in <code>[#536](pytest-dev/pytest-cov#536) <https://github.com/pytest-dev/pytest-cov/issues/536></code>_. </li> <li> Modernized pytest hook implementation. Contributed by Bruno Oliveira in <code>[#549](pytest-dev/pytest-cov#549) <https://github.com/pytest-dev/pytest-cov/pull/549></code>_ and Ronny Pfannschmidt in <code>[#550](pytest-dev/pytest-cov#550) <https://github.com/pytest-dev/pytest-cov/pull/550></code>_. </li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/28db055bebbf3ee016a2144c8b69dd7b80b48cc5"><code>28db055</code></a> Bump version: 3.0.0 → 4.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/57e9354a86f658556fe6f15f07625c4b9a9ddf53"><code>57e9354</code></a> Really update the changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/56b810b91c9ae15d1462633c6a8a1b522ebf8e65"><code>56b810b</code></a> Update chagelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/f7fced579e36b72b57e14768026467e4c4511a40"><code>f7fced5</code></a> Add support for LCOV output</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1211d3134bb74abb7b00c3c2209091aaab440417"><code>1211d31</code></a> Fix flake8 error</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b077753f5d9d200815fe500d0ef23e306784e65b"><code>b077753</code></a> Use modern approach to specify hook options</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/00713b3fec90cb8c98a9e4bfb3212e574c08e67b"><code>00713b3</code></a> removed incorrect docs on <code>data_file</code>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b3dda36fddd3ca75689bb3645cd320aa8392aaf3"><code>b3dda36</code></a> Improve workflow with a collecting status check. (<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-cov/issues/548">#548</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/218419f665229d61356f1eea3ddc8e18aa21f87c"><code>218419f</code></a> Prevent undesirable new lines to be displayed when report is disabled</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/60b73ec673c60942a3cf052ee8a1fdc442840558"><code>60b73ec</code></a> migrate build command from distutils to setuptools</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v3.0.0...v4.0.0">compare view</a></li> </ul> </details> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=3.0.0&new-version=4.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

…-ds (#123) Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 3.0.0 to 4.0.0. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing parallel = true sigterm = true </li> <li> Fixed deprecation in <code>setup.py</code> by trying to import setuptools before distutils. Contributed by Ben Greiner in <code>[#545](pytest-dev/pytest-cov#545) <https://github.com/pytest-dev/pytest-cov/pull/545></code>_. </li> <li> Removed undesirable new lines that were displayed while reporting was disabled. Contributed by Delgan in <code>[#540](pytest-dev/pytest-cov#540) <https://github.com/pytest-dev/pytest-cov/pull/540></code>_. </li> <li> Documentation fixes. Contributed by Andre Brisco in <code>[#543](pytest-dev/pytest-cov#543) <https://github.com/pytest-dev/pytest-cov/pull/543></code>_ and Colin O'Dell in <code>[#525](pytest-dev/pytest-cov#525) <https://github.com/pytest-dev/pytest-cov/pull/525></code>_. </li> <li> Added support for LCOV output format via <code>--cov-report=lcov</code>. Only works with coverage 6.3+. Contributed by Christian Fetzer in <code>[#536](pytest-dev/pytest-cov#536) <https://github.com/pytest-dev/pytest-cov/issues/536></code>_. </li> <li> Modernized pytest hook implementation. Contributed by Bruno Oliveira in <code>[#549](pytest-dev/pytest-cov#549) <https://github.com/pytest-dev/pytest-cov/pull/549></code>_ and Ronny Pfannschmidt in <code>[#550](pytest-dev/pytest-cov#550) <https://github.com/pytest-dev/pytest-cov/pull/550></code>_. </li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/28db055bebbf3ee016a2144c8b69dd7b80b48cc5"><code>28db055</code></a> Bump version: 3.0.0 → 4.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/57e9354a86f658556fe6f15f07625c4b9a9ddf53"><code>57e9354</code></a> Really update the changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/56b810b91c9ae15d1462633c6a8a1b522ebf8e65"><code>56b810b</code></a> Update chagelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/f7fced579e36b72b57e14768026467e4c4511a40"><code>f7fced5</code></a> Add support for LCOV output</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1211d3134bb74abb7b00c3c2209091aaab440417"><code>1211d31</code></a> Fix flake8 error</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b077753f5d9d200815fe500d0ef23e306784e65b"><code>b077753</code></a> Use modern approach to specify hook options</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/00713b3fec90cb8c98a9e4bfb3212e574c08e67b"><code>00713b3</code></a> removed incorrect docs on <code>data_file</code>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b3dda36fddd3ca75689bb3645cd320aa8392aaf3"><code>b3dda36</code></a> Improve workflow with a collecting status check. (<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-cov/issues/548">#548</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/218419f665229d61356f1eea3ddc8e18aa21f87c"><code>218419f</code></a> Prevent undesirable new lines to be displayed when report is disabled</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/60b73ec673c60942a3cf052ee8a1fdc442840558"><code>60b73ec</code></a> migrate build command from distutils to setuptools</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v3.0.0...v4.0.0">compare view</a></li> </ul> </details> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=3.0.0&new-version=4.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

…er (#1057) Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 3.0.0 to 4.0.0. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing parallel = true sigterm = true </li> <li> Fixed deprecation in <code>setup.py</code> by trying to import setuptools before distutils. Contributed by Ben Greiner in <code>[#545](pytest-dev/pytest-cov#545) <https://github.com/pytest-dev/pytest-cov/pull/545></code>_. </li> <li> Removed undesirable new lines that were displayed while reporting was disabled. Contributed by Delgan in <code>[#540](pytest-dev/pytest-cov#540) <https://github.com/pytest-dev/pytest-cov/pull/540></code>_. </li> <li> Documentation fixes. Contributed by Andre Brisco in <code>[#543](pytest-dev/pytest-cov#543) <https://github.com/pytest-dev/pytest-cov/pull/543></code>_ and Colin O'Dell in <code>[#525](pytest-dev/pytest-cov#525) <https://github.com/pytest-dev/pytest-cov/pull/525></code>_. </li> <li> Added support for LCOV output format via <code>--cov-report=lcov</code>. Only works with coverage 6.3+. Contributed by Christian Fetzer in <code>[#536](pytest-dev/pytest-cov#536) <https://github.com/pytest-dev/pytest-cov/issues/536></code>_. </li> <li> Modernized pytest hook implementation. Contributed by Bruno Oliveira in <code>[#549](pytest-dev/pytest-cov#549) <https://github.com/pytest-dev/pytest-cov/pull/549></code>_ and Ronny Pfannschmidt in <code>[#550](pytest-dev/pytest-cov#550) <https://github.com/pytest-dev/pytest-cov/pull/550></code>_. </li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/28db055bebbf3ee016a2144c8b69dd7b80b48cc5"><code>28db055</code></a> Bump version: 3.0.0 → 4.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/57e9354a86f658556fe6f15f07625c4b9a9ddf53"><code>57e9354</code></a> Really update the changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/56b810b91c9ae15d1462633c6a8a1b522ebf8e65"><code>56b810b</code></a> Update chagelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/f7fced579e36b72b57e14768026467e4c4511a40"><code>f7fced5</code></a> Add support for LCOV output</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1211d3134bb74abb7b00c3c2209091aaab440417"><code>1211d31</code></a> Fix flake8 error</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b077753f5d9d200815fe500d0ef23e306784e65b"><code>b077753</code></a> Use modern approach to specify hook options</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/00713b3fec90cb8c98a9e4bfb3212e574c08e67b"><code>00713b3</code></a> removed incorrect docs on <code>data_file</code>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b3dda36fddd3ca75689bb3645cd320aa8392aaf3"><code>b3dda36</code></a> Improve workflow with a collecting status check. (<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-cov/issues/548">#548</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/218419f665229d61356f1eea3ddc8e18aa21f87c"><code>218419f</code></a> Prevent undesirable new lines to be displayed when report is disabled</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/60b73ec673c60942a3cf052ee8a1fdc442840558"><code>60b73ec</code></a> migrate build command from distutils to setuptools</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v3.0.0...v4.0.0">compare view</a></li> </ul> </details> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=3.0.0&new-version=4.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing parallel = true sigterm = true </li> <li> Fixed deprecation in <code>setup.py</code> by trying to import setuptools before distutils. Contributed by Ben Greiner in <code>[#545](pytest-dev/pytest-cov#545) <https://github.com/pytest-dev/pytest-cov/pull/545></code>_. </li> <li> Removed undesirable new lines that were displayed while reporting was disabled. Contributed by Delgan in <code>[#540](pytest-dev/pytest-cov#540) <https://github.com/pytest-dev/pytest-cov/pull/540></code>_. </li> <li> Documentation fixes. Contributed by Andre Brisco in <code>[#543](pytest-dev/pytest-cov#543) <https://github.com/pytest-dev/pytest-cov/pull/543></code>_ and Colin O'Dell in <code>[#525](pytest-dev/pytest-cov#525) <https://github.com/pytest-dev/pytest-cov/pull/525></code>_. </li> <li> Added support for LCOV output format via <code>--cov-report=lcov</code>. Only works with coverage 6.3+. Contributed by Christian Fetzer in <code>[#536](pytest-dev/pytest-cov#536) <https://github.com/pytest-dev/pytest-cov/issues/536></code>_. </li> <li> Modernized pytest hook implementation. Contributed by Bruno Oliveira in <code>[#549](pytest-dev/pytest-cov#549) <https://github.com/pytest-dev/pytest-cov/pull/549></code>_ and Ronny Pfannschmidt in <code>[#550](pytest-dev/pytest-cov#550) <https://github.com/pytest-dev/pytest-cov/pull/550></code>_. </li> </ul> <h2>3.0.0 (2021-10-04)</h2> Note that this release drops support for Python 2.7 and Python 3.5. <ul> <li>Added support for Python 3.10 and updated various test dependencies. Contributed by Hugo van Kemenade in <code>[#500](pytest-dev/pytest-cov#500) <https://github.com/pytest-dev/pytest-cov/pull/500></code>_.</li> <li>Switched from Travis CI to GitHub Actions. Contributed by Hugo van Kemenade in <code>[#494](pytest-dev/pytest-cov#494) <https://github.com/pytest-dev/pytest-cov/pull/494></code>_ and <code>[#495](pytest-dev/pytest-cov#495) <https://github.com/pytest-dev/pytest-cov/pull/495></code>_.</li> <li>Add a <code>--cov-reset</code> CLI option. Contributed by Danilo Šegan in <code>[#459](pytest-dev/pytest-cov#459) <https://github.com/pytest-dev/pytest-cov/pull/459></code>_.</li> <li>Improved validation of <code>--cov-fail-under</code> CLI option. Contributed by ... Ronny Pfannschmidt's desire for skark in <code>[#480](pytest-dev/pytest-cov#480) <https://github.com/pytest-dev/pytest-cov/pull/480></code>_.</li> <li>Dropped Python 2.7 support.</li> </ul>  </blockquote> ... (truncated) </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/28db055bebbf3ee016a2144c8b69dd7b80b48cc5"><code>28db055</code></a> Bump version: 3.0.0 → 4.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/57e9354a86f658556fe6f15f07625c4b9a9ddf53"><code>57e9354</code></a> Really update the changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/56b810b91c9ae15d1462633c6a8a1b522ebf8e65"><code>56b810b</code></a> Update chagelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/f7fced579e36b72b57e14768026467e4c4511a40"><code>f7fced5</code></a> Add support for LCOV output</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1211d3134bb74abb7b00c3c2209091aaab440417"><code>1211d31</code></a> Fix flake8 error</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b077753f5d9d200815fe500d0ef23e306784e65b"><code>b077753</code></a> Use modern approach to specify hook options</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/00713b3fec90cb8c98a9e4bfb3212e574c08e67b"><code>00713b3</code></a> removed incorrect docs on <code>data_file</code>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b3dda36fddd3ca75689bb3645cd320aa8392aaf3"><code>b3dda36</code></a> Improve workflow with a collecting status check. (<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-cov/issues/548">#548</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/218419f665229d61356f1eea3ddc8e18aa21f87c"><code>218419f</code></a> Prevent undesirable new lines to be displayed when report is disabled</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/60b73ec673c60942a3cf052ee8a1fdc442840558"><code>60b73ec</code></a> migrate build command from distutils to setuptools</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v2.12.0...v4.0.0">compare view</a></li> </ul> </details> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

622: build(deps): bump pytest-cov from 3.0.0 to 4.0.0 r=ChrisRBe a=dependabot[bot] [//]: # (dependabot-start) ⚠️ **Dependabot is rebasing this PR** ⚠️ Rebasing might not happen immediately, so don't worry if this takes some time. Note: if you make any changes to this PR yourself, they will take precedence over the rebase. --- [//]: # (dependabot-end) Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 3.0.0 to 4.0.0. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing parallel = true sigterm = true </li> <li> Fixed deprecation in <code>setup.py</code> by trying to import setuptools before distutils. Contributed by Ben Greiner in <code>[#545](pytest-dev/pytest-cov#545) <https://github.com/pytest-dev/pytest-cov/pull/545></code>_. </li> <li> Removed undesirable new lines that were displayed while reporting was disabled. Contributed by Delgan in <code>[#540](pytest-dev/pytest-cov#540) <https://github.com/pytest-dev/pytest-cov/pull/540></code>_. </li> <li> Documentation fixes. Contributed by Andre Brisco in <code>[#543](pytest-dev/pytest-cov#543) <https://github.com/pytest-dev/pytest-cov/pull/543></code>_ and Colin O'Dell in <code>[#525](pytest-dev/pytest-cov#525) <https://github.com/pytest-dev/pytest-cov/pull/525></code>_. </li> <li> Added support for LCOV output format via <code>--cov-report=lcov</code>. Only works with coverage 6.3+. Contributed by Christian Fetzer in <code>[#536](pytest-dev/pytest-cov#536) <https://github.com/pytest-dev/pytest-cov/issues/536></code>_. </li> <li> Modernized pytest hook implementation. Contributed by Bruno Oliveira in <code>[#549](pytest-dev/pytest-cov#549) <https://github.com/pytest-dev/pytest-cov/pull/549></code>_ and Ronny Pfannschmidt in <code>[#550](pytest-dev/pytest-cov#550) <https://github.com/pytest-dev/pytest-cov/pull/550></code>_. </li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/28db055bebbf3ee016a2144c8b69dd7b80b48cc5"><code>28db055</code></a> Bump version: 3.0.0 → 4.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/57e9354a86f658556fe6f15f07625c4b9a9ddf53"><code>57e9354</code></a> Really update the changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/56b810b91c9ae15d1462633c6a8a1b522ebf8e65"><code>56b810b</code></a> Update chagelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/f7fced579e36b72b57e14768026467e4c4511a40"><code>f7fced5</code></a> Add support for LCOV output</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1211d3134bb74abb7b00c3c2209091aaab440417"><code>1211d31</code></a> Fix flake8 error</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b077753f5d9d200815fe500d0ef23e306784e65b"><code>b077753</code></a> Use modern approach to specify hook options</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/00713b3fec90cb8c98a9e4bfb3212e574c08e67b"><code>00713b3</code></a> removed incorrect docs on <code>data_file</code>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b3dda36fddd3ca75689bb3645cd320aa8392aaf3"><code>b3dda36</code></a> Improve workflow with a collecting status check. (<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-cov/issues/548">#548</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/218419f665229d61356f1eea3ddc8e18aa21f87c"><code>218419f</code></a> Prevent undesirable new lines to be displayed when report is disabled</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/60b73ec673c60942a3cf052ee8a1fdc442840558"><code>60b73ec</code></a> migrate build command from distutils to setuptools</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v3.0.0...v4.0.0">compare view</a></li> </ul> </details> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=3.0.0&new-version=4.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting ``@dependabot` rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - ``@dependabot` rebase` will rebase this PR - ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it - ``@dependabot` merge` will merge this PR after your CI passes on it - ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it - ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging - ``@dependabot` reopen` will reopen this PR if it is closed - ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

622: build(deps): bump pytest-cov from 3.0.0 to 4.0.0 r=ChrisRBe a=dependabot[bot] Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 3.0.0 to 4.0.0. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing parallel = true sigterm = true </li> <li> Fixed deprecation in <code>setup.py</code> by trying to import setuptools before distutils. Contributed by Ben Greiner in <code>[#545](pytest-dev/pytest-cov#545) <https://github.com/pytest-dev/pytest-cov/pull/545></code>_. </li> <li> Removed undesirable new lines that were displayed while reporting was disabled. Contributed by Delgan in <code>[#540](pytest-dev/pytest-cov#540) <https://github.com/pytest-dev/pytest-cov/pull/540></code>_. </li> <li> Documentation fixes. Contributed by Andre Brisco in <code>[#543](pytest-dev/pytest-cov#543) <https://github.com/pytest-dev/pytest-cov/pull/543></code>_ and Colin O'Dell in <code>[#525](pytest-dev/pytest-cov#525) <https://github.com/pytest-dev/pytest-cov/pull/525></code>_. </li> <li> Added support for LCOV output format via <code>--cov-report=lcov</code>. Only works with coverage 6.3+. Contributed by Christian Fetzer in <code>[#536](pytest-dev/pytest-cov#536) <https://github.com/pytest-dev/pytest-cov/issues/536></code>_. </li> <li> Modernized pytest hook implementation. Contributed by Bruno Oliveira in <code>[#549](pytest-dev/pytest-cov#549) <https://github.com/pytest-dev/pytest-cov/pull/549></code>_ and Ronny Pfannschmidt in <code>[#550](pytest-dev/pytest-cov#550) <https://github.com/pytest-dev/pytest-cov/pull/550></code>_. </li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/28db055bebbf3ee016a2144c8b69dd7b80b48cc5"><code>28db055</code></a> Bump version: 3.0.0 → 4.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/57e9354a86f658556fe6f15f07625c4b9a9ddf53"><code>57e9354</code></a> Really update the changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/56b810b91c9ae15d1462633c6a8a1b522ebf8e65"><code>56b810b</code></a> Update chagelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/f7fced579e36b72b57e14768026467e4c4511a40"><code>f7fced5</code></a> Add support for LCOV output</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1211d3134bb74abb7b00c3c2209091aaab440417"><code>1211d31</code></a> Fix flake8 error</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b077753f5d9d200815fe500d0ef23e306784e65b"><code>b077753</code></a> Use modern approach to specify hook options</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/00713b3fec90cb8c98a9e4bfb3212e574c08e67b"><code>00713b3</code></a> removed incorrect docs on <code>data_file</code>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b3dda36fddd3ca75689bb3645cd320aa8392aaf3"><code>b3dda36</code></a> Improve workflow with a collecting status check. (<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-cov/issues/548">#548</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/218419f665229d61356f1eea3ddc8e18aa21f87c"><code>218419f</code></a> Prevent undesirable new lines to be displayed when report is disabled</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/60b73ec673c60942a3cf052ee8a1fdc442840558"><code>60b73ec</code></a> migrate build command from distutils to setuptools</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v3.0.0...v4.0.0">compare view</a></li> </ul> </details> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=3.0.0&new-version=4.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting ``@dependabot` rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - ``@dependabot` rebase` will rebase this PR - ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it - ``@dependabot` merge` will merge this PR after your CI passes on it - ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it - ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging - ``@dependabot` reopen` will reopen this PR if it is closed - ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

[![Mend Renovate](https://app.renovatebot.com/images/banner.svg)](https://renovatebot.com) This PR contains the following updates: | Package | Change | Age | Adoption | Passing | Confidence | |---|---|---|---|---|---| | [pytest-cov](https://togithub.com/pytest-dev/pytest-cov) ([changelog](https://pytest-cov.readthedocs.io/en/latest/changelog.html)) | `==3.0.0` -> `==4.0.0` | [![age](https://badges.renovateapi.com/packages/pypi/pytest-cov/4.0.0/age-slim)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://badges.renovateapi.com/packages/pypi/pytest-cov/4.0.0/adoption-slim)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://badges.renovateapi.com/packages/pypi/pytest-cov/4.0.0/compatibility-slim/3.0.0)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://badges.renovateapi.com/packages/pypi/pytest-cov/4.0.0/confidence-slim/3.0.0)](https://docs.renovatebot.com/merge-confidence/) | --- ### Release Notes <details> <summary>pytest-dev/pytest-cov</summary> ### [`v4.0.0`](https://togithub.com/pytest-dev/pytest-cov/blob/HEAD/CHANGELOG.rst#400-2022-09-28) [Compare Source](https://togithub.com/pytest-dev/pytest-cov/compare/v3.0.0...v4.0.0) **Note that this release drops support for multiprocessing.** - `--cov-fail-under` no longer causes `pytest --collect-only` to fail Contributed by Zac Hatfield-Dodds in `#511 <https://github.com/pytest-dev/pytest-cov/pull/511>`\_. - Dropped support for multiprocessing (mostly because `issue 82408 <https://github.com/python/cpython/issues/82408>`\_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your `.coveragerc`:: \[run] concurrency = multiprocessing parallel = true sigterm = true - Fixed deprecation in `setup.py` by trying to import setuptools before distutils. Contributed by Ben Greiner in `#545 <https://github.com/pytest-dev/pytest-cov/pull/545>`\_. - Removed undesirable new lines that were displayed while reporting was disabled. Contributed by Delgan in `#540 <https://github.com/pytest-dev/pytest-cov/pull/540>`\_. - Documentation fixes. Contributed by Andre Brisco in `#543 <https://github.com/pytest-dev/pytest-cov/pull/543>`\_ and Colin O'Dell in `#525 <https://github.com/pytest-dev/pytest-cov/pull/525>`\_. - Added support for LCOV output format via `--cov-report=lcov`. Only works with coverage 6.3+. Contributed by Christian Fetzer in `#536 <https://github.com/pytest-dev/pytest-cov/issues/536>`\_. - Modernized pytest hook implementation. Contributed by Bruno Oliveira in `#549 <https://github.com/pytest-dev/pytest-cov/pull/549>`\_ and Ronny Pfannschmidt in `#550 <https://github.com/pytest-dev/pytest-cov/pull/550>`\_. </details> --- ### Configuration 📅 **Schedule**: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined). 🚦 **Automerge**: Disabled by config. Please merge this manually once you are satisfied. ♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox. 🔕 **Ignore**: Close this PR and you won't be reminded about this update again. --- - [ ] If you want to rebase/retry this PR, check this box --- This PR has been generated by [Mend Renovate](https://www.mend.io/free-developer-tools/renovate/). View repository job log [here](https://app.renovatebot.com/dashboard#github/allenporter/flux-local).  Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

…-ds (#123) Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 3.0.0 to 4.0.0. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing parallel = true sigterm = true </li> <li> Fixed deprecation in <code>setup.py</code> by trying to import setuptools before distutils. Contributed by Ben Greiner in <code>[#545](pytest-dev/pytest-cov#545) <https://github.com/pytest-dev/pytest-cov/pull/545></code>_. </li> <li> Removed undesirable new lines that were displayed while reporting was disabled. Contributed by Delgan in <code>[#540](pytest-dev/pytest-cov#540) <https://github.com/pytest-dev/pytest-cov/pull/540></code>_. </li> <li> Documentation fixes. Contributed by Andre Brisco in <code>[#543](pytest-dev/pytest-cov#543) <https://github.com/pytest-dev/pytest-cov/pull/543></code>_ and Colin O'Dell in <code>[#525](pytest-dev/pytest-cov#525) <https://github.com/pytest-dev/pytest-cov/pull/525></code>_. </li> <li> Added support for LCOV output format via <code>--cov-report=lcov</code>. Only works with coverage 6.3+. Contributed by Christian Fetzer in <code>[#536](pytest-dev/pytest-cov#536) <https://github.com/pytest-dev/pytest-cov/issues/536></code>_. </li> <li> Modernized pytest hook implementation. Contributed by Bruno Oliveira in <code>[#549](pytest-dev/pytest-cov#549) <https://github.com/pytest-dev/pytest-cov/pull/549></code>_ and Ronny Pfannschmidt in <code>[#550](pytest-dev/pytest-cov#550) <https://github.com/pytest-dev/pytest-cov/pull/550></code>_. </li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/28db055bebbf3ee016a2144c8b69dd7b80b48cc5"><code>28db055</code></a> Bump version: 3.0.0 → 4.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/57e9354a86f658556fe6f15f07625c4b9a9ddf53"><code>57e9354</code></a> Really update the changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/56b810b91c9ae15d1462633c6a8a1b522ebf8e65"><code>56b810b</code></a> Update chagelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/f7fced579e36b72b57e14768026467e4c4511a40"><code>f7fced5</code></a> Add support for LCOV output</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1211d3134bb74abb7b00c3c2209091aaab440417"><code>1211d31</code></a> Fix flake8 error</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b077753f5d9d200815fe500d0ef23e306784e65b"><code>b077753</code></a> Use modern approach to specify hook options</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/00713b3fec90cb8c98a9e4bfb3212e574c08e67b"><code>00713b3</code></a> removed incorrect docs on <code>data_file</code>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b3dda36fddd3ca75689bb3645cd320aa8392aaf3"><code>b3dda36</code></a> Improve workflow with a collecting status check. (<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-cov/issues/548">#548</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/218419f665229d61356f1eea3ddc8e18aa21f87c"><code>218419f</code></a> Prevent undesirable new lines to be displayed when report is disabled</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/60b73ec673c60942a3cf052ee8a1fdc442840558"><code>60b73ec</code></a> migrate build command from distutils to setuptools</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v3.0.0...v4.0.0">compare view</a></li> </ul> </details> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=3.0.0&new-version=4.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

[![Mend Renovate](https://app.renovatebot.com/images/banner.svg)](https://renovatebot.com) This PR contains the following updates: | Package | Change | Age | Adoption | Passing | Confidence | |---|---|---|---|---|---| | [pytest-cov](https://togithub.com/pytest-dev/pytest-cov) ([changelog](https://pytest-cov.readthedocs.io/en/latest/changelog.html)) | `3.0.0` -> `4.0.0` | [![age](https://badges.renovateapi.com/packages/pypi/pytest-cov/4.0.0/age-slim)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://badges.renovateapi.com/packages/pypi/pytest-cov/4.0.0/adoption-slim)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://badges.renovateapi.com/packages/pypi/pytest-cov/4.0.0/compatibility-slim/3.0.0)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://badges.renovateapi.com/packages/pypi/pytest-cov/4.0.0/confidence-slim/3.0.0)](https://docs.renovatebot.com/merge-confidence/) | --- ### Release Notes <details> <summary>pytest-dev/pytest-cov</summary> ### [`v4.0.0`](https://togithub.com/pytest-dev/pytest-cov/blob/HEAD/CHANGELOG.rst#400-2022-09-28) [Compare Source](https://togithub.com/pytest-dev/pytest-cov/compare/v3.0.0...v4.0.0) **Note that this release drops support for multiprocessing.** - `--cov-fail-under` no longer causes `pytest --collect-only` to fail Contributed by Zac Hatfield-Dodds in `#511 <https://github.com/pytest-dev/pytest-cov/pull/511>`\_. - Dropped support for multiprocessing (mostly because `issue 82408 <https://github.com/python/cpython/issues/82408>`\_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your `.coveragerc`:: \[run] concurrency = multiprocessing parallel = true sigterm = true - Fixed deprecation in `setup.py` by trying to import setuptools before distutils. Contributed by Ben Greiner in `#545 <https://github.com/pytest-dev/pytest-cov/pull/545>`\_. - Removed undesirable new lines that were displayed while reporting was disabled. Contributed by Delgan in `#540 <https://github.com/pytest-dev/pytest-cov/pull/540>`\_. - Documentation fixes. Contributed by Andre Brisco in `#543 <https://github.com/pytest-dev/pytest-cov/pull/543>`\_ and Colin O'Dell in `#525 <https://github.com/pytest-dev/pytest-cov/pull/525>`\_. - Added support for LCOV output format via `--cov-report=lcov`. Only works with coverage 6.3+. Contributed by Christian Fetzer in `#536 <https://github.com/pytest-dev/pytest-cov/issues/536>`\_. - Modernized pytest hook implementation. Contributed by Bruno Oliveira in `#549 <https://github.com/pytest-dev/pytest-cov/pull/549>`\_ and Ronny Pfannschmidt in `#550 <https://github.com/pytest-dev/pytest-cov/pull/550>`\_. </details> --- ### Configuration 📅 **Schedule**: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined). 🚦 **Automerge**: Disabled by config. Please merge this manually once you are satisfied. ♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox. 🔕 **Ignore**: Close this PR and you won't be reminded about this update again. --- - [ ] If you want to rebase/retry this PR, check this box --- This PR has been generated by [Mend Renovate](https://www.mend.io/free-developer-tools/renovate/). View repository job log [here](https://app.renovatebot.com/dashboard#github/jankatins/pr-workflow-example).

…er (#1057) Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 3.0.0 to 4.0.0. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing parallel = true sigterm = true </li> <li> Fixed deprecation in <code>setup.py</code> by trying to import setuptools before distutils. Contributed by Ben Greiner in <code>[#545](pytest-dev/pytest-cov#545) <https://github.com/pytest-dev/pytest-cov/pull/545></code>_. </li> <li> Removed undesirable new lines that were displayed while reporting was disabled. Contributed by Delgan in <code>[#540](pytest-dev/pytest-cov#540) <https://github.com/pytest-dev/pytest-cov/pull/540></code>_. </li> <li> Documentation fixes. Contributed by Andre Brisco in <code>[#543](pytest-dev/pytest-cov#543) <https://github.com/pytest-dev/pytest-cov/pull/543></code>_ and Colin O'Dell in <code>[#525](pytest-dev/pytest-cov#525) <https://github.com/pytest-dev/pytest-cov/pull/525></code>_. </li> <li> Added support for LCOV output format via <code>--cov-report=lcov</code>. Only works with coverage 6.3+. Contributed by Christian Fetzer in <code>[#536](pytest-dev/pytest-cov#536) <https://github.com/pytest-dev/pytest-cov/issues/536></code>_. </li> <li> Modernized pytest hook implementation. Contributed by Bruno Oliveira in <code>[#549](pytest-dev/pytest-cov#549) <https://github.com/pytest-dev/pytest-cov/pull/549></code>_ and Ronny Pfannschmidt in <code>[#550](pytest-dev/pytest-cov#550) <https://github.com/pytest-dev/pytest-cov/pull/550></code>_. </li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/28db055bebbf3ee016a2144c8b69dd7b80b48cc5"><code>28db055</code></a> Bump version: 3.0.0 → 4.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/57e9354a86f658556fe6f15f07625c4b9a9ddf53"><code>57e9354</code></a> Really update the changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/56b810b91c9ae15d1462633c6a8a1b522ebf8e65"><code>56b810b</code></a> Update chagelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/f7fced579e36b72b57e14768026467e4c4511a40"><code>f7fced5</code></a> Add support for LCOV output</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1211d3134bb74abb7b00c3c2209091aaab440417"><code>1211d31</code></a> Fix flake8 error</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b077753f5d9d200815fe500d0ef23e306784e65b"><code>b077753</code></a> Use modern approach to specify hook options</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/00713b3fec90cb8c98a9e4bfb3212e574c08e67b"><code>00713b3</code></a> removed incorrect docs on <code>data_file</code>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b3dda36fddd3ca75689bb3645cd320aa8392aaf3"><code>b3dda36</code></a> Improve workflow with a collecting status check. (<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-cov/issues/548">#548</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/218419f665229d61356f1eea3ddc8e18aa21f87c"><code>218419f</code></a> Prevent undesirable new lines to be displayed when report is disabled</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/60b73ec673c60942a3cf052ee8a1fdc442840558"><code>60b73ec</code></a> migrate build command from distutils to setuptools</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v3.0.0...v4.0.0">compare view</a></li> </ul> </details> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=3.0.0&new-version=4.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

…21) Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing parallel = true sigterm = true </li> <li> Fixed deprecation in <code>setup.py</code> by trying to import setuptools before distutils. Contributed by Ben Greiner in <code>[#545](pytest-dev/pytest-cov#545) <https://github.com/pytest-dev/pytest-cov/pull/545></code>_. </li> <li> Removed undesirable new lines that were displayed while reporting was disabled. Contributed by Delgan in <code>[#540](pytest-dev/pytest-cov#540) <https://github.com/pytest-dev/pytest-cov/pull/540></code>_. </li> <li> Documentation fixes. Contributed by Andre Brisco in <code>[#543](pytest-dev/pytest-cov#543) <https://github.com/pytest-dev/pytest-cov/pull/543></code>_ and Colin O'Dell in <code>[#525](pytest-dev/pytest-cov#525) <https://github.com/pytest-dev/pytest-cov/pull/525></code>_. </li> <li> Added support for LCOV output format via <code>--cov-report=lcov</code>. Only works with coverage 6.3+. Contributed by Christian Fetzer in <code>[#536](pytest-dev/pytest-cov#536) <https://github.com/pytest-dev/pytest-cov/issues/536></code>_. </li> <li> Modernized pytest hook implementation. Contributed by Bruno Oliveira in <code>[#549](pytest-dev/pytest-cov#549) <https://github.com/pytest-dev/pytest-cov/pull/549></code>_ and Ronny Pfannschmidt in <code>[#550](pytest-dev/pytest-cov#550) <https://github.com/pytest-dev/pytest-cov/pull/550></code>_. </li> </ul> <h2>3.0.0 (2021-10-04)</h2> Note that this release drops support for Python 2.7 and Python 3.5. <ul> <li>Added support for Python 3.10 and updated various test dependencies. Contributed by Hugo van Kemenade in <code>[#500](pytest-dev/pytest-cov#500) <https://github.com/pytest-dev/pytest-cov/pull/500></code>_.</li> <li>Switched from Travis CI to GitHub Actions. Contributed by Hugo van Kemenade in <code>[#494](pytest-dev/pytest-cov#494) <https://github.com/pytest-dev/pytest-cov/pull/494></code>_ and <code>[#495](pytest-dev/pytest-cov#495) <https://github.com/pytest-dev/pytest-cov/pull/495></code>_.</li> <li>Add a <code>--cov-reset</code> CLI option. Contributed by Danilo Šegan in <code>[#459](pytest-dev/pytest-cov#459) <https://github.com/pytest-dev/pytest-cov/pull/459></code>_.</li> <li>Improved validation of <code>--cov-fail-under</code> CLI option. Contributed by ... Ronny Pfannschmidt's desire for skark in <code>[#480](pytest-dev/pytest-cov#480) <https://github.com/pytest-dev/pytest-cov/pull/480></code>_.</li> <li>Dropped Python 2.7 support.</li> </ul>  </blockquote> ... (truncated) </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/28db055bebbf3ee016a2144c8b69dd7b80b48cc5"><code>28db055</code></a> Bump version: 3.0.0 → 4.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/57e9354a86f658556fe6f15f07625c4b9a9ddf53"><code>57e9354</code></a> Really update the changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/56b810b91c9ae15d1462633c6a8a1b522ebf8e65"><code>56b810b</code></a> Update chagelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/f7fced579e36b72b57e14768026467e4c4511a40"><code>f7fced5</code></a> Add support for LCOV output</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1211d3134bb74abb7b00c3c2209091aaab440417"><code>1211d31</code></a> Fix flake8 error</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b077753f5d9d200815fe500d0ef23e306784e65b"><code>b077753</code></a> Use modern approach to specify hook options</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/00713b3fec90cb8c98a9e4bfb3212e574c08e67b"><code>00713b3</code></a> removed incorrect docs on <code>data_file</code>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b3dda36fddd3ca75689bb3645cd320aa8392aaf3"><code>b3dda36</code></a> Improve workflow with a collecting status check. (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/548">#548</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/218419f665229d61356f1eea3ddc8e18aa21f87c"><code>218419f</code></a> Prevent undesirable new lines to be displayed when report is disabled</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/60b73ec673c60942a3cf052ee8a1fdc442840558"><code>60b73ec</code></a> migrate build command from distutils to setuptools</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v3.0.0...v4.0.0">compare view</a></li> </ul> </details> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 3.0.0 to 4.0.0. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing parallel = true sigterm = true </li> <li> Fixed deprecation in <code>setup.py</code> by trying to import setuptools before distutils. Contributed by Ben Greiner in <code>[#545](pytest-dev/pytest-cov#545) <https://github.com/pytest-dev/pytest-cov/pull/545></code>_. </li> <li> Removed undesirable new lines that were displayed while reporting was disabled. Contributed by Delgan in <code>[#540](pytest-dev/pytest-cov#540) <https://github.com/pytest-dev/pytest-cov/pull/540></code>_. </li> <li> Documentation fixes. Contributed by Andre Brisco in <code>[#543](pytest-dev/pytest-cov#543) <https://github.com/pytest-dev/pytest-cov/pull/543></code>_ and Colin O'Dell in <code>[#525](pytest-dev/pytest-cov#525) <https://github.com/pytest-dev/pytest-cov/pull/525></code>_. </li> <li> Added support for LCOV output format via <code>--cov-report=lcov</code>. Only works with coverage 6.3+. Contributed by Christian Fetzer in <code>[#536](pytest-dev/pytest-cov#536) <https://github.com/pytest-dev/pytest-cov/issues/536></code>_. </li> <li> Modernized pytest hook implementation. Contributed by Bruno Oliveira in <code>[#549](pytest-dev/pytest-cov#549) <https://github.com/pytest-dev/pytest-cov/pull/549></code>_ and Ronny Pfannschmidt in <code>[#550](pytest-dev/pytest-cov#550) <https://github.com/pytest-dev/pytest-cov/pull/550></code>_. </li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/28db055bebbf3ee016a2144c8b69dd7b80b48cc5"><code>28db055</code></a> Bump version: 3.0.0 → 4.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/57e9354a86f658556fe6f15f07625c4b9a9ddf53"><code>57e9354</code></a> Really update the changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/56b810b91c9ae15d1462633c6a8a1b522ebf8e65"><code>56b810b</code></a> Update chagelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/f7fced579e36b72b57e14768026467e4c4511a40"><code>f7fced5</code></a> Add support for LCOV output</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1211d3134bb74abb7b00c3c2209091aaab440417"><code>1211d31</code></a> Fix flake8 error</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b077753f5d9d200815fe500d0ef23e306784e65b"><code>b077753</code></a> Use modern approach to specify hook options</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/00713b3fec90cb8c98a9e4bfb3212e574c08e67b"><code>00713b3</code></a> removed incorrect docs on <code>data_file</code>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b3dda36fddd3ca75689bb3645cd320aa8392aaf3"><code>b3dda36</code></a> Improve workflow with a collecting status check. (<a href="https://github-redirect.dependabot.com/pytest-dev/pytest-cov/issues/548">#548</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/218419f665229d61356f1eea3ddc8e18aa21f87c"><code>218419f</code></a> Prevent undesirable new lines to be displayed when report is disabled</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/60b73ec673c60942a3cf052ee8a1fdc442840558"><code>60b73ec</code></a> migrate build command from distutils to setuptools</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v3.0.0...v4.0.0">compare view</a></li> </ul> </details> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=3.0.0&new-version=4.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Daniel Ciborowski <dciborow@microsoft.com>

Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing parallel = true sigterm = true </li> <li> Fixed deprecation in <code>setup.py</code> by trying to import setuptools before distutils. Contributed by Ben Greiner in <code>[#545](pytest-dev/pytest-cov#545) <https://github.com/pytest-dev/pytest-cov/pull/545></code>_. </li> <li> Removed undesirable new lines that were displayed while reporting was disabled. Contributed by Delgan in <code>[#540](pytest-dev/pytest-cov#540) <https://github.com/pytest-dev/pytest-cov/pull/540></code>_. </li> <li> Documentation fixes. Contributed by Andre Brisco in <code>[#543](pytest-dev/pytest-cov#543) <https://github.com/pytest-dev/pytest-cov/pull/543></code>_ and Colin O'Dell in <code>[#525](pytest-dev/pytest-cov#525) <https://github.com/pytest-dev/pytest-cov/pull/525></code>_. </li> <li> Added support for LCOV output format via <code>--cov-report=lcov</code>. Only works with coverage 6.3+. Contributed by Christian Fetzer in <code>[#536](pytest-dev/pytest-cov#536) <https://github.com/pytest-dev/pytest-cov/issues/536></code>_. </li> <li> Modernized pytest hook implementation. Contributed by Bruno Oliveira in <code>[#549](pytest-dev/pytest-cov#549) <https://github.com/pytest-dev/pytest-cov/pull/549></code>_ and Ronny Pfannschmidt in <code>[#550](pytest-dev/pytest-cov#550) <https://github.com/pytest-dev/pytest-cov/pull/550></code>_. </li> </ul> 3.0.0 (2021-10-04)  </blockquote> ... (truncated) </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/2c9f2170d8575b21bafb6402eb30ca7de31e20b9"><code>2c9f217</code></a> Bump version: 4.0.0 → 4.1.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4d245df8f75e434a9e1b162b51265d6a45017465"><code>4d245df</code></a> Update changelog and authors.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/7b095c84ae521b14058d7d520ef36372849063a8"><code>7b095c8</code></a> Skip starting from xdist 3.0.2 (where boxed was removed).</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/605d6902b3b3d17aad0bf811b8c580fc895724ca"><code>605d690</code></a> disabling boxed test if version xdist newer than 2.5.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/76fb2a6cb2c4a4a788a5b62710848daf9c8fb7ce"><code>76fb2a6</code></a> introduced f-strings</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/0d63ede0d2ca9f4acc8329aa4261a7cec489ffdb"><code>0d63ede</code></a> Update test config. Reapply some of the changes from PR567 to the right file ...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/f3d8d8380f6a4b265353fe7cd509b040702f1e64"><code>f3d8d83</code></a> Add support for JSON reporter</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/dec02abeb9fa8ee3547baa054bde6006bea530ee"><code>dec02ab</code></a> Update test deps.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/88a7d348986bace58e26c88a713ef35f900ce2ef"><code>88a7d34</code></a> chore: update AUTHORS and CHANGELOG</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/74eb4cc8b684269b89735e31b623f0f9795c5d5c"><code>74eb4cc</code></a> perf: only call summary when the report will be used</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v3.0.0...v4.1.0">compare view</a></li> </ul> </details> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 3.0.0 to 4.1.0. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing parallel = true sigterm = true </li> <li> Fixed deprecation in <code>setup.py</code> by trying to import setuptools before distutils. Contributed by Ben Greiner in <code>[#545](pytest-dev/pytest-cov#545) <https://github.com/pytest-dev/pytest-cov/pull/545></code>_. </li> <li> Removed undesirable new lines that were displayed while reporting was disabled. Contributed by Delgan in <code>[#540](pytest-dev/pytest-cov#540) <https://github.com/pytest-dev/pytest-cov/pull/540></code>_. </li> <li> Documentation fixes. Contributed by Andre Brisco in <code>[#543](pytest-dev/pytest-cov#543) <https://github.com/pytest-dev/pytest-cov/pull/543></code>_ and Colin O'Dell in <code>[#525](pytest-dev/pytest-cov#525) <https://github.com/pytest-dev/pytest-cov/pull/525></code>_. </li> <li> Added support for LCOV output format via <code>--cov-report=lcov</code>. Only works with coverage 6.3+. Contributed by Christian Fetzer in <code>[#536](pytest-dev/pytest-cov#536) <https://github.com/pytest-dev/pytest-cov/issues/536></code>_. </li> <li> Modernized pytest hook implementation. Contributed by Bruno Oliveira in <code>[#549](pytest-dev/pytest-cov#549) <https://github.com/pytest-dev/pytest-cov/pull/549></code>_ and Ronny Pfannschmidt in <code>[#550](pytest-dev/pytest-cov#550) <https://github.com/pytest-dev/pytest-cov/pull/550></code>_. </li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/2c9f2170d8575b21bafb6402eb30ca7de31e20b9"><code>2c9f217</code></a> Bump version: 4.0.0 → 4.1.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4d245df8f75e434a9e1b162b51265d6a45017465"><code>4d245df</code></a> Update changelog and authors.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/7b095c84ae521b14058d7d520ef36372849063a8"><code>7b095c8</code></a> Skip starting from xdist 3.0.2 (where boxed was removed).</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/605d6902b3b3d17aad0bf811b8c580fc895724ca"><code>605d690</code></a> disabling boxed test if version xdist newer than 2.5.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/76fb2a6cb2c4a4a788a5b62710848daf9c8fb7ce"><code>76fb2a6</code></a> introduced f-strings</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/0d63ede0d2ca9f4acc8329aa4261a7cec489ffdb"><code>0d63ede</code></a> Update test config. Reapply some of the changes from PR567 to the right file ...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/f3d8d8380f6a4b265353fe7cd509b040702f1e64"><code>f3d8d83</code></a> Add support for JSON reporter</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/dec02abeb9fa8ee3547baa054bde6006bea530ee"><code>dec02ab</code></a> Update test deps.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/88a7d348986bace58e26c88a713ef35f900ce2ef"><code>88a7d34</code></a> chore: update AUTHORS and CHANGELOG</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/74eb4cc8b684269b89735e31b623f0f9795c5d5c"><code>74eb4cc</code></a> perf: only call summary when the report will be used</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v3.0.0...v4.1.0">compare view</a></li> </ul> </details> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=3.0.0&new-version=4.1.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) You can trigger a rebase of this PR by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> > **Note** > Automatic rebases have been disabled on this pull request as it has been open for over 30 days. Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

[//]: # (dependabot-start) ⚠️ **Dependabot is rebasing this PR** ⚠️ Rebasing might not happen immediately, so don't worry if this takes some time. Note: if you make any changes to this PR yourself, they will take precedence over the rebase. --- [//]: # (dependabot-end) Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing parallel = true sigterm = true </li> <li> Fixed deprecation in <code>setup.py</code> by trying to import setuptools before distutils. Contributed by Ben Greiner in <code>[#545](pytest-dev/pytest-cov#545) <https://github.com/pytest-dev/pytest-cov/pull/545></code>_. </li> <li> Removed undesirable new lines that were displayed while reporting was disabled. Contributed by Delgan in <code>[#540](pytest-dev/pytest-cov#540) <https://github.com/pytest-dev/pytest-cov/pull/540></code>_. </li> <li> Documentation fixes. Contributed by Andre Brisco in <code>[#543](pytest-dev/pytest-cov#543) <https://github.com/pytest-dev/pytest-cov/pull/543></code>_ and Colin O'Dell in <code>[#525](pytest-dev/pytest-cov#525) <https://github.com/pytest-dev/pytest-cov/pull/525></code>_. </li> <li> Added support for LCOV output format via <code>--cov-report=lcov</code>. Only works with coverage 6.3+. Contributed by Christian Fetzer in <code>[#536](pytest-dev/pytest-cov#536) <https://github.com/pytest-dev/pytest-cov/issues/536></code>_. </li> <li> Modernized pytest hook implementation. Contributed by Bruno Oliveira in <code>[#549](pytest-dev/pytest-cov#549) <https://github.com/pytest-dev/pytest-cov/pull/549></code>_ and Ronny Pfannschmidt in <code>[#550](pytest-dev/pytest-cov#550) <https://github.com/pytest-dev/pytest-cov/pull/550></code>_. </li> </ul> 3.0.0 (2021-10-04)  </blockquote> ... (truncated) </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/2c9f2170d8575b21bafb6402eb30ca7de31e20b9"><code>2c9f217</code></a> Bump version: 4.0.0 → 4.1.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4d245df8f75e434a9e1b162b51265d6a45017465"><code>4d245df</code></a> Update changelog and authors.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/7b095c84ae521b14058d7d520ef36372849063a8"><code>7b095c8</code></a> Skip starting from xdist 3.0.2 (where boxed was removed).</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/605d6902b3b3d17aad0bf811b8c580fc895724ca"><code>605d690</code></a> disabling boxed test if version xdist newer than 2.5.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/76fb2a6cb2c4a4a788a5b62710848daf9c8fb7ce"><code>76fb2a6</code></a> introduced f-strings</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/0d63ede0d2ca9f4acc8329aa4261a7cec489ffdb"><code>0d63ede</code></a> Update test config. Reapply some of the changes from PR567 to the right file ...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/f3d8d8380f6a4b265353fe7cd509b040702f1e64"><code>f3d8d83</code></a> Add support for JSON reporter</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/dec02abeb9fa8ee3547baa054bde6006bea530ee"><code>dec02ab</code></a> Update test deps.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/88a7d348986bace58e26c88a713ef35f900ce2ef"><code>88a7d34</code></a> chore: update AUTHORS and CHANGELOG</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/74eb4cc8b684269b89735e31b623f0f9795c5d5c"><code>74eb4cc</code></a> perf: only call summary when the report will be used</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.0.0...v4.1.0">compare view</a></li> </ul> </details> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing </li> </ul>  </blockquote> ... (truncated) </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.0.0...v5.0.0">compare view</a></li> </ul> </details> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

…159) Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing </li> </ul>  </blockquote> ... (truncated) </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0">compare view</a></li> </ul> </details> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing </li> </ul>  </blockquote> ... (truncated) </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0">compare view</a></li> </ul> </details> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

…45) Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing </li> </ul>  </blockquote> ... (truncated) </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v3.0.0...v5.0.0">compare view</a></li> </ul> </details> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

…472) Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing </li> </ul>  </blockquote> ... (truncated) </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.0.0...v5.0.0">compare view</a></li> </ul> </details> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing </li> </ul>  </blockquote> ... (truncated) </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.0.0...v5.0.0">compare view</a></li> </ul> </details> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

…258) Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing </li> </ul>  </blockquote> ... (truncated) </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.0.0...v5.0.0">compare view</a></li> </ul> </details> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing </li> </ul>  </blockquote> ... (truncated) </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0">compare view</a></li> </ul> </details> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> --------- Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Francesca L. Bleken <48128015+francescalb@users.noreply.github.com> Co-authored-by: francescalb <francesca.l.bleken@sintef.no>

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 2.10.1 to 5.0.0. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing </li> </ul>  </blockquote> ... (truncated) </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v2.10.1...v5.0.0">compare view</a></li> </ul> </details> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=2.10.1&new-version=5.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>. <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> Note that this release drops support for multiprocessing. <ul> <li> <code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_. </li> <li> Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow. There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>:: [run] concurrency = multiprocessing </li> </ul>  </blockquote> ... (truncated) </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.0.0...v5.0.0">compare view</a></li> </ul> </details> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

--co disables --cov-fail-under

6925fcf

Zac-HD requested a review from ionelmc December 20, 2021 11:31

ionelmc approved these changes Dec 21, 2021

View reviewed changes

ionelmc merged commit 8a7766a into master Dec 21, 2021

Zac-HD deleted the no-fail-collectonly branch December 21, 2021 20:38

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

`--cov-fail-under` should not cause `pytest --collect-only` to fail #511

`--cov-fail-under` should not cause `pytest --collect-only` to fail #511

Zac-HD commented Dec 11, 2021 •

edited

Loading

ionelmc left a comment

Zac-HD commented Jul 12, 2022 •

edited

Loading

--cov-fail-under should not cause pytest --collect-only to fail #511

--cov-fail-under should not cause pytest --collect-only to fail #511

Conversation

Zac-HD commented Dec 11, 2021 • edited Loading

ionelmc left a comment

Choose a reason for hiding this comment

Zac-HD commented Jul 12, 2022 • edited Loading

`--cov-fail-under` should not cause `pytest --collect-only` to fail #511

`--cov-fail-under` should not cause `pytest --collect-only` to fail #511

Zac-HD commented Dec 11, 2021 •

edited

Loading

Zac-HD commented Jul 12, 2022 •

edited

Loading