Release 3.0.4

CHANGELOG.rst

@@ -1,7 +1,5 @@
-3.0.4.dev0
-==========
-
-*
+3.0.4
+=====
 
 * Import errors when collecting test modules now display the full traceback (`#1976`_).
   Thanks `@cwitty`_ for the report and `@nicoddemus`_ for the PR.
@@ -35,10 +33,6 @@
 * Clean up unittest TestCase objects after tests are complete (`#1649`_).
   Thanks `@d_b_w`_ for the report and PR.
 
-*
-
-*
-
 
 .. _@adborden: https://github.com/adborden
 .. _@cwitty: https://github.com/cwitty

_pytest/__init__.py

@@ -1,2 +1,2 @@
 #
-__version__ = '3.0.4.dev0'
+__version__ = '3.0.4'

doc/en/announce/index.rst

@@ -6,6 +6,7 @@ Release announcements
    :maxdepth: 2
 
 
+   release-3.0.4
    release-3.0.3
    release-3.0.2
    release-3.0.1

doc/en/announce/release-3.0.4.rst

@@ -0,0 +1,29 @@
+pytest-3.0.4
+============
+
+pytest 3.0.4 has just been released to PyPI.
+
+This release fixes some regressions and bugs reported in the last version, 
+being a drop-in replacement. To upgrade::
+
+  pip install --upgrade pytest
+
+The changelog is available at http://doc.pytest.org/en/latest/changelog.html.
+
+Thanks to all who contributed to this release, among them:
+
+* Bruno Oliveira
+* Dan Wandschneider
+* Florian Bruhin
+* Georgy Dyuldin
+* Grigorii Eremeev
+* Jason R. Coombs
+* Manuel Jacob
+* Mathieu Clabaut
+* Michael Seifert
+* Nikolaus Rath
+* Ronny Pfannschmidt
+* Tom V
+
+Happy testing,
+The pytest Development Team

doc/en/assert.rst

@@ -26,7 +26,7 @@ you will see the return value of the function call::
 
     $ pytest test_assert1.py
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 1 items
 
@@ -170,7 +170,7 @@ if you run this module::
 
     $ pytest test_assert2.py
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 1 items
 

doc/en/cache.rst

@@ -80,7 +80,7 @@ If you then run it with ``--lf``::
 
     $ pytest --lf
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
     run-last-failure: rerun last 2 failures
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 50 items
@@ -122,7 +122,7 @@ of ``FF`` and dots)::
 
     $ pytest --ff
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
     run-last-failure: rerun last 2 failures first
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 50 items
@@ -227,7 +227,7 @@ You can always peek at the content of the cache using the
 
     $ py.test --cache-show
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
     rootdir: $REGENDOC_TMPDIR, inifile: 
     cachedir: $REGENDOC_TMPDIR/.cache
     ------------------------------- cache values -------------------------------

doc/en/capture.rst

@@ -64,7 +64,7 @@ of the failing function and hide the other one::
 
     $ pytest
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 2 items
 

doc/en/doctest.rst

@@ -49,7 +49,7 @@ then you can just invoke ``pytest`` without command line options::
 
     $ pytest
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
     rootdir: $REGENDOC_TMPDIR, inifile: pytest.ini
     collected 1 items
 

doc/en/example/markers.rst

@@ -31,7 +31,7 @@ You can then restrict a test run to only run tests marked with ``webtest``::
 
     $ pytest -v -m webtest
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0 -- $PYTHON_PREFIX/bin/python3.5
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0 -- $PYTHON_PREFIX/bin/python3.5
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 4 items
@@ -45,7 +45,7 @@ Or the inverse, running all tests except the webtest ones::
 
     $ pytest -v -m "not webtest"
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0 -- $PYTHON_PREFIX/bin/python3.5
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0 -- $PYTHON_PREFIX/bin/python3.5
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 4 items
@@ -66,7 +66,7 @@ tests based on their module, class, method, or function name::
 
     $ pytest -v test_server.py::TestClass::test_method
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0 -- $PYTHON_PREFIX/bin/python3.5
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0 -- $PYTHON_PREFIX/bin/python3.5
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 5 items
@@ -79,7 +79,7 @@ You can also select on the class::
 
     $ pytest -v test_server.py::TestClass
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0 -- $PYTHON_PREFIX/bin/python3.5
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0 -- $PYTHON_PREFIX/bin/python3.5
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 4 items
@@ -92,7 +92,7 @@ Or select multiple nodes::
 
   $ pytest -v test_server.py::TestClass test_server.py::test_send_http
   ======= test session starts ========
-  platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0 -- $PYTHON_PREFIX/bin/python3.5
+  platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0 -- $PYTHON_PREFIX/bin/python3.5
   cachedir: .cache
   rootdir: $REGENDOC_TMPDIR, inifile: 
   collecting ... collected 8 items
@@ -130,7 +130,7 @@ select tests based on their names::
 
     $ pytest -v -k http  # running with the above defined example module
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0 -- $PYTHON_PREFIX/bin/python3.5
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0 -- $PYTHON_PREFIX/bin/python3.5
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 4 items
@@ -144,7 +144,7 @@ And you can also run all tests except the ones that match the keyword::
 
     $ pytest -k "not send_http" -v
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0 -- $PYTHON_PREFIX/bin/python3.5
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0 -- $PYTHON_PREFIX/bin/python3.5
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 4 items
@@ -160,7 +160,7 @@ Or to select "http" and "quick" tests::
 
     $ pytest -k "http or quick" -v
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0 -- $PYTHON_PREFIX/bin/python3.5
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0 -- $PYTHON_PREFIX/bin/python3.5
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 4 items
@@ -352,7 +352,7 @@ the test needs::
 
     $ pytest -E stage2
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 1 items
 
@@ -364,7 +364,7 @@ and here is one that specifies exactly the environment needed::
 
     $ pytest -E stage1
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 1 items
 
@@ -485,7 +485,7 @@ then you will see two test skipped and two executed tests as expected::
 
     $ pytest -rs # this option reports skip reasons
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 4 items
 
@@ -499,7 +499,7 @@ Note that if you specify a platform via the marker-command line option like this
 
     $ pytest -m linux2
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 4 items
 
@@ -551,7 +551,7 @@ We can now use the ``-m option`` to select one set::
 
   $ pytest -m interface --tb=short
   ======= test session starts ========
-  platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+  platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
   rootdir: $REGENDOC_TMPDIR, inifile: 
   collected 4 items
 
@@ -573,7 +573,7 @@ or to select both "event" and "interface" tests::
 
   $ pytest -m "interface or event" --tb=short
   ======= test session starts ========
-  platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+  platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
   rootdir: $REGENDOC_TMPDIR, inifile: 
   collected 4 items
 

doc/en/example/nonpython.rst

@@ -27,7 +27,7 @@ now execute the test specification::
 
     nonpython $ pytest test_simple.yml
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
     rootdir: $REGENDOC_TMPDIR/nonpython, inifile: 
     collected 2 items
 
@@ -59,7 +59,7 @@ consulted when reporting in ``verbose`` mode::
 
     nonpython $ pytest -v
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0 -- $PYTHON_PREFIX/bin/python3.5
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0 -- $PYTHON_PREFIX/bin/python3.5
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR/nonpython, inifile: 
     collecting ... collected 2 items
@@ -81,7 +81,7 @@ interesting to just look at the collection tree::
 
     nonpython $ pytest --collect-only
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
     rootdir: $REGENDOC_TMPDIR/nonpython, inifile: 
     collected 2 items
     <YamlFile 'test_simple.yml'>

doc/en/example/parametrize.rst

@@ -130,7 +130,7 @@ objects, they are still using the default pytest representation::
 
     $ pytest test_time.py --collect-only
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 6 items
     <Module 'test_time.py'>
@@ -181,7 +181,7 @@ this is a fully self-contained example which you can run with::
 
     $ pytest test_scenarios.py
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 4 items
 
@@ -194,7 +194,7 @@ If you just collect tests you'll also nicely see 'advanced' and 'basic' as varia
 
     $ pytest --collect-only test_scenarios.py
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 4 items
     <Module 'test_scenarios.py'>
@@ -259,7 +259,7 @@ Let's first see how it looks like at collection time::
 
     $ pytest test_backends.py --collect-only
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 2 items
     <Module 'test_backends.py'>
@@ -320,7 +320,7 @@ The result of this test will be successful::
 
     $ pytest test_indirect_list.py --collect-only
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 1 items
     <Module 'test_indirect_list.py'>
@@ -447,7 +447,7 @@ If you run this with reporting for skips enabled::
 
     $ pytest -rs test_module.py
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 2 items
 

doc/en/example/pythoncollection.rst

@@ -117,7 +117,7 @@ then the test collection looks like this::
 
     $ pytest --collect-only
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
     rootdir: $REGENDOC_TMPDIR, inifile: pytest.ini
     collected 2 items
     <Module 'check_myapp.py'>
@@ -163,7 +163,7 @@ You can always peek at the collection tree without running tests like this::
 
     . $ pytest --collect-only pythoncollection.py
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
     rootdir: $REGENDOC_TMPDIR, inifile: pytest.ini
     collected 3 items
     <Module 'CWD/pythoncollection.py'>
@@ -230,7 +230,7 @@ will be left out::
 
     $ pytest --collect-only
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
     rootdir: $REGENDOC_TMPDIR, inifile: pytest.ini
     collected 0 items
 

doc/en/example/reportingdemo.rst

@@ -11,7 +11,7 @@ get on the terminal - we are working on that)::
 
     assertion $ pytest failure_demo.py
     ======= test session starts ========
-    platform linux -- Python 3.5.2, pytest-3.0.3, py-1.4.31, pluggy-0.4.0
+    platform linux -- Python 3.5.2, pytest-3.0.4, py-1.4.31, pluggy-0.4.0
     rootdir: $REGENDOC_TMPDIR/assertion, inifile: 
     collected 42 items
 
@@ -359,7 +359,7 @@ get on the terminal - we are working on that)::
     >   int(s)
     E   ValueError: invalid literal for int() with base 10: 'qwe'
 
-    <0-codegen $PYTHON_PREFIX/lib/python3.5/site-packages/_pytest/python.py:1190>:1: ValueError
+    <0-codegen $PYTHON_PREFIX/lib/python3.5/site-packages/_pytest/python.py:1204>:1: ValueError
     _______ TestRaises.test_raises_doesnt ________
 
     self = <failure_demo.TestRaises object at 0xdeadbeef>