Imported Upstream version 4.99.6~20140108

.cvsignore

@@ -0,0 +1,8 @@
+aclocal.m4
+autom4te.cache
+config.cache
+config.log
+config.status
+configure
+sample-config.tcl
+naviserver.rdf

Makefile

@@ -0,0 +1,247 @@
+#
+# The contents of this file are subject to the Mozilla Public License
+# Version 1.1 (the "License"); you may not use this file except in
+# compliance with the License. You may obtain a copy of the License at
+# http://www.mozilla.org/.
+#
+# Software distributed under the License is distributed on an "AS IS"
+# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+# the License for the specific language governing rights and limitations
+# under the License.
+#
+# The Original Code is AOLserver Code and related documentation
+# distributed by AOL.
+#
+# The Initial Developer of the Original Code is America Online,
+# Inc. Portions created by AOL are Copyright (C) 1999 America Online,
+# Inc. All Rights Reserved.
+#
+# Alternatively, the contents of this file may be used under the terms
+# of the GNU General Public License (the "GPL"), in which case the
+# provisions of GPL are applicable instead of those above.  If you wish
+# to allow use of your version of this file only under the terms of the
+# GPL and not to allow others to use your version of this file under the
+# License, indicate your decision by deleting the provisions above and
+# replace them with the notice and other provisions required by the GPL.
+# If you do not delete the provisions above, a recipient may use your
+# version of this file under either the License or the GPL.
+#
+#
+#
+
+NSBUILD=1
+include include/Makefile.global
+
+dirs   = nsthread nsd nssock nscgi nscp nslog nsperm nsdb nsdbtest
+
+# Unix only modules
+ifeq (,$(findstring MINGW,$(uname)))
+   dirs += nsproxy
+endif
+
+distfiles = $(dirs) doc tcl contrib include tests win win32 configure m4 \
+	Makefile autogen.sh install-sh missing aclocal.m4 configure.ac \
+	README NEWS sample-config.tcl.in simple-config.tcl openacs-config.tcl \
+	nsd-config.tcl index.adp license.terms naviserver.rdf naviserver.rdf.in \
+	version_include.man.in bitbucket-install.tcl
+
+all:
+	@for i in $(dirs); do \
+		( cd $$i && $(MAKE) all ) || exit 1; \
+	done
+
+help:
+	@echo 'Commonly used make targets:'
+	@echo '  all          - build program and documentation'
+	@echo '  install      - install program and man pages to PREFIX ($(PREFIX))'
+	@echo '  test         - run all tests in the automatic test suite'
+	@echo '  gdbtest      - run all tests, under the control of the debugger'
+	@echo '  runtest      - start the server in interactive command mode'
+	@echo '  gdbruntest   - start the server in command mode, under the debugger'
+	@echo '  memcheck     - run all tests, under the valgrind memory checker'
+	@echo '  build-doc    - build the html and nroff documentation'
+	@echo '  dist         - create a source tarball naviserver-'$(NS_PATCH_LEVEL)'.tar.gz'
+	@echo '  clean        - remove files created by other targets'
+	@echo
+	@echo 'Example for a system-wide installation under /usr/local/ns:'
+	@echo '  make all && su -c "make install"'
+	@echo
+	@echo 'Example for running a single test in the test suite, under the debugger:'
+	@echo '  make gdbtest TCLTESTARGS="-file tclconnio.test -match tclconnio-1.1"'
+	@echo
+
+install: install-dirs install-include install-tcl install-modules \
+	install-config install-doc install-examples install-notice
+
+install-notice:
+	@echo ""
+	@echo ""
+	@echo "Congratulations, you have installed NaviServer."
+	@echo ""
+	@if [ "`whoami`" = "root" ]; then \
+	  echo "  Because you are running as root, the server needs an unprivileged user to be"; \
+	  echo "  specified (e.g. nsadmin). The permissions for log directory have to be set up:"; \
+	  echo ""; \
+	  echo "  chown -R nsadmin $(NAVISERVER)/logs"; \
+	  echo ""; \
+	  user="-u nsadmin"; \
+	  chown -R nobody $(NAVISERVER)/logs; \
+	fi; \
+	echo "You can now run NaviServer by typing the following command: "; \
+	echo ""; \
+	echo "  $(NAVISERVER)/bin/nsd -f $$user -t $(NAVISERVER)/conf/nsd-config.tcl"; \
+	echo ""; \
+	echo "As a next step, you need to configure the server according to your needs."; \
+	echo "Consult as a reference the alternate configuration files in $(NAVISERVER)/conf/"; \
+	echo ""
+
+install-dirs: all
+	@for i in bin lib logs include tcl pages conf modules modules/tcl cgi-bin; do \
+		$(MKDIR) $(DESTDIR)$(NAVISERVER)/$$i; \
+	done
+
+install-config: all
+	@mkdir -p $(DESTDIR)$(NAVISERVER)/conf $(DESTDIR)$(NAVISERVER)/pages/
+	@for i in nsd-config.tcl sample-config.tcl simple-config.tcl openacs-config.tcl ; do \
+		$(INSTALL_DATA) $$i $(DESTDIR)$(NAVISERVER)/conf/; \
+	done
+	@for i in index.adp bitbucket-install.tcl; do \
+		$(INSTALL_DATA) $$i $(DESTDIR)$(NAVISERVER)/pages/; \
+	done
+	$(INSTALL_SH) install-sh $(DESTDIR)$(INSTBIN)/
+
+install-modules: all
+	@for i in $(dirs); do \
+		(cd $$i && $(MAKE) install) || exit 1; \
+	done
+
+install-tcl: all
+	@for i in tcl/*.tcl; do \
+		$(INSTALL_DATA) $$i $(DESTDIR)$(NAVISERVER)/tcl/; \
+	done
+
+install-include: all
+	@for i in include/*.h include/Makefile.global include/Makefile.module; do \
+		$(INSTALL_DATA) $$i $(DESTDIR)$(INSTHDR)/; \
+	done
+
+install-tests:
+	$(CP) -r tests $(INSTSRVPAG)
+
+install-doc:
+	@$(MKDIR) $(DESTDIR)$(NAVISERVER)/pages/doc
+	$(CP) doc/html/* $(DESTDIR)$(NAVISERVER)/pages/doc
+	$(CP) contrib/banners/*.png $(DESTDIR)$(NAVISERVER)/pages/doc
+
+install-examples:
+	@$(MKDIR) $(DESTDIR)$(NAVISERVER)/pages/examples
+	@for i in contrib/examples/*.adp contrib/examples/*.tcl; do \
+		$(INSTALL_DATA) $$i $(DESTDIR)$(NAVISERVER)/pages/examples/; \
+	done
+
+DTPLITE=$(NAVISERVER)/bin/tclsh $(NAVISERVER)/bin/dtplite
+
+build-doc:
+	$(RM) doc/html doc/man doc/tmp
+	$(MKDIR) doc/html doc/man doc/tmp
+	@for srcdir in nscgi \
+		       nslog \
+		       nsdb \
+		       nsproxy \
+		       nscp \
+		       nsperm \
+		       nssock \
+                       doc/src/manual \
+                       doc/src/naviserver \
+                       modules/nsexpat \
+                       modules/nsconfigrw \
+                       modules/nsdbi \
+                       modules/nsloopctl \
+                       modules/nsvfs; do \
+		if [ -d $$srcdir ]; then \
+		   echo $$srcdir; \
+                   $(MKDIR) doc/tmp/`basename $$srcdir`; \
+	           find $$srcdir -name '*.man' -exec $(CP) "{}" doc/tmp/`basename $$srcdir` ";"; \
+		fi; \
+	done
+	@cd doc/tmp; \
+	for srcdir in `ls`; do \
+	    echo $$srcdir; \
+            if [ -f $$srcdir/version_include.man ]; then \
+               $(CP) $$srcdir/version_include.man .; \
+	    else \
+               $(CP) ../../version_include.man .; \
+            fi; \
+	    $(DTPLITE) -merge -style ../src/man.css \
+                       -header ../src/header.inc \
+                       -footer ../src/footer.inc \
+                       -o ../html/ html $$srcdir; \
+	    $(DTPLITE) -merge -o ../man/ nroff $$srcdir; \
+	done
+	$(RM) doc/tmp
+
+#
+# Testing:
+#
+
+NS_TEST_CFG	= -u root -c -d -t $(srcdir)/tests/test.nscfg
+NS_TEST_ALL	= $(srcdir)/tests/all.tcl $(TCLTESTARGS)
+LD_LIBRARY_PATH	= \
+   LD_LIBRARY_PATH="$(srcdir)/nsd:$(srcdir)/nsthread:$(srcdir)/nsdb:$(srcdir)/nsproxy:$$LD_LIBRARY_PATH" \
+   DYLD_LIBRARY_PATH="$(srcdir)/nsd:$(srcdir)/nsthread:$(srcdir)/nsdb:$(srcdir)/nsproxy:$$DYLD_LIBRARY_PATH"
+
+check: test
+
+test: all
+	$(LD_LIBRARY_PATH) ./nsd/nsd $(NS_TEST_CFG) $(NS_TEST_ALL)
+
+runtest: all
+	$(LD_LIBRARY_PATH) ./nsd/nsd $(NS_TEST_CFG)
+
+gdbtest: all
+	@echo set args $(NS_TEST_CFG) $(NS_TEST_ALL) > gdb.run
+	$(LD_LIBRARY_PATH) gdb -x gdb.run ./nsd/nsd
+	rm gdb.run
+
+gdbruntest: all
+	@echo set args $(NS_TEST_CFG) > gdb.run
+	$(LD_LIBRARY_PATH) gdb -x gdb.run ./nsd/nsd
+	rm gdb.run
+
+memcheck: all
+	$(LD_LIBRARY_PATH) valgrind --tool=memcheck ./nsd/nsd $(NS_TEST_CFG) $(NS_TEST_ALL)
+helgrind: all
+	$(LD_LIBRARY_PATH) valgrind --tool=helgrind ./nsd/nsd $(NS_TEST_CFG) $(NS_TEST_ALL)
+
+
+
+checkexports: all
+	@for i in $(dirs); do \
+		nm -p $$i/*.so | awk '$$2 ~ /[TDB]/ { print $$3 }' | sort -n | uniq | grep -v '^[Nn]s\|^TclX\|^_'; \
+	done
+
+clean:
+	@for i in $(dirs); do \
+		(cd $$i && $(MAKE) clean) || exit 1; \
+	done
+
+clean-bak: clean
+	@find . -name '*~' -exec rm "{}" ";"
+
+distclean: clean
+	$(RM) config.status config.log config.cache autom4te.cache aclocal.m4 configure \
+	include/{Makefile.global,Makefile.module,config.h,config.h.in,stamp-h1} \
+	naviserver-$(NS_PATCH_LEVEL).tar.gz sample-config.tcl
+
+dist: clean
+	$(RM) naviserver-$(NS_PATCH_LEVEL)
+	$(MKDIR) naviserver-$(NS_PATCH_LEVEL)
+	$(CP) $(distfiles) naviserver-$(NS_PATCH_LEVEL)
+	$(RM) naviserver-$(NS_PATCH_LEVEL)/include/{config.h,Makefile.global,Makefile.module,stamp-h1}
+	hg log --style=changelog > naviserver-$(NS_PATCH_LEVEL)/ChangeLog
+	find naviserver-$(NS_PATCH_LEVEL) -name '.[a-zA-Z_]*' -exec rm \{} \;
+	tar czf naviserver-$(NS_PATCH_LEVEL).tar.gz --exclude="._*" naviserver-$(NS_PATCH_LEVEL)
+	$(RM) naviserver-$(NS_PATCH_LEVEL)
+
+
+.PHONY: all install install-binaries install-doc install-tests clean distclean