-
-
Notifications
You must be signed in to change notification settings - Fork 39.5k
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
[Keyboard] Add Amber80 Solder & VCL65 Solder (#15945)
Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Ryan <fauxpark@gmail.com>
- Loading branch information
1 parent
773124e
commit 958600d
Showing
27 changed files
with
799 additions
and
0 deletions.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,25 @@ | ||
# Amber80 solder | ||
|
||
A TKL keyboard sold in several variants. | ||
|
||
1. [Solder](solder/): 1/2022. Atmega32u4 soldered keyboard. Sold under the name "Amber80" with Amber80 keyboard case. Compatible with Amber80 keyboard case. | ||
|
||
**Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board. | ||
|
||
* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan) | ||
* Hardware Supported: Amber80 | ||
* Hardware Availability: Comming Soon | ||
|
||
Make examples for this keyboard (after setting up your build environment): | ||
|
||
make sawnsprojects/amber80/solder:default | ||
|
||
## Bootloader | ||
|
||
Enter the bootloader in 3 ways: | ||
|
||
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard | ||
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead | ||
* **Keycode in layout**: Press the key mapped to `RESET` if it is available | ||
|
||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,72 @@ | ||
/* Copyright 2022 SawnsProjects | ||
* | ||
* This program is free software: you can redistribute it and/or modify | ||
* it under the terms of the GNU General Public License as published by | ||
* the Free Software Foundation, either version 2 of the License, or | ||
* (at your option) any later version. | ||
* | ||
* This program is distributed in the hope that it will be useful, | ||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
* GNU General Public License for more details. | ||
* | ||
* You should have received a copy of the GNU General Public License | ||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | ||
*/ | ||
|
||
#pragma once | ||
|
||
#include "config_common.h" | ||
|
||
/* USB Device descriptor parameter */ | ||
#define VENDOR_ID 0x5350 | ||
#define PRODUCT_ID 0xA801 | ||
#define DEVICE_VER 0x0001 | ||
#define MANUFACTURER SawnsProjects X Yuutsu X Zlane | ||
#define PRODUCT Amber80 Solder | ||
|
||
/* key matrix size */ | ||
#define MATRIX_ROWS 12 | ||
#define MATRIX_COLS 9 | ||
|
||
/* Indicator */ | ||
#define LED_CAPS_LOCK_PIN F5 | ||
#define LED_SCROLL_LOCK_PIN B0 | ||
#define LED_PIN_ON_STATE 0 | ||
/* | ||
* Keyboard Matrix Assignments | ||
* | ||
* Change this to how you wired your keyboard | ||
* COLS: AVR pins used for columns, left to right | ||
* ROWS: AVR pins used for rows, top to bottom | ||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | ||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | ||
* | ||
*/ | ||
#define MATRIX_ROW_PINS { B1, B2, B3, B7, D0, D1, F1, F0, D7, B4, D5, D3 } | ||
#define MATRIX_COL_PINS { F4, F6, F7, C7, C6, B6, B5, D6, D4 } | ||
#define UNUSED_PINS | ||
|
||
/* COL2ROW, ROW2COL*/ | ||
#define DIODE_DIRECTION COL2ROW | ||
|
||
/* RGB */ | ||
#define RGB_DI_PIN D2 | ||
#ifdef RGB_DI_PIN | ||
#define RGBLED_NUM 22 | ||
#define RGBLIGHT_HUE_STEP 8 | ||
#define RGBLIGHT_SAT_STEP 8 | ||
#define RGBLIGHT_VAL_STEP 8 | ||
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ | ||
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | ||
// /*== or choose animations ==*/ | ||
#define RGBLIGHT_EFFECT_BREATHING | ||
#define RGBLIGHT_EFFECT_RAINBOW_MOOD | ||
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL | ||
#define RGBLIGHT_EFFECT_SNAKE | ||
#define RGBLIGHT_EFFECT_KNIGHT | ||
#define RGBLIGHT_EFFECT_CHRISTMAS | ||
#define RGBLIGHT_EFFECT_STATIC_GRADIENT | ||
#define RGBLIGHT_EFFECT_RGB_TEST | ||
#define RGBLIGHT_EFFECT_ALTERNATING | ||
#endif |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,101 @@ | ||
{ | ||
"keyboard_name": "Amber80 SOLDER", | ||
"url": "", | ||
"maintainer": "SawnsProjects", | ||
"layouts": { | ||
"LAYOUT_all": { | ||
"layout": [ | ||
{ "label": "K00 (B1,F4)", "x": 0, "y": 0 }, | ||
{ "label": "K10 (B2,F4)", "x": 1.25, "y": 0 }, | ||
{ "label": "K01 (B1,F6)", "x": 2.25, "y": 0 }, | ||
{ "label": "K11 (B2,F6)", "x": 3.25, "y": 0 }, | ||
{ "label": "K02 (B1,F7)", "x": 4.25, "y": 0 }, | ||
{ "label": "K12 (B2,F7)", "x": 5.5, "y": 0 }, | ||
{ "label": "K03 (B1,C7)", "x": 6.5, "y": 0 }, | ||
{ "label": "K13 (B2,C7)", "x": 7.5, "y": 0 }, | ||
{ "label": "K04 (B1,C6)", "x": 8.5, "y": 0 }, | ||
{ "label": "K14 (B2,C6)", "x": 9.75, "y": 0 }, | ||
{ "label": "K05 (B1,B6)", "x": 10.75, "y": 0 }, | ||
{ "label": "K15 (B2,B6)", "x": 11.75, "y": 0 }, | ||
{ "label": "K06 (B1,B5)", "x": 12.75, "y": 0 }, | ||
{ "label": "K16 (B2,B5)", "x": 14, "y": 0 }, | ||
{ "label": "K17 (B2,D6)", "x": 15.25, "y": 0 }, | ||
{ "label": "K08 (B1,D4)", "x": 16.25, "y": 0 }, | ||
{ "label": "K18 (B2,D4)", "x": 17.25, "y": 0 }, | ||
{ "label": "K20 (B3,F4)", "x": 0, "y": 1.25 }, | ||
{ "label": "K30 (B7,F4)", "x": 1, "y": 1.25 }, | ||
{ "label": "K21 (B3,F6)", "x": 2, "y": 1.25 }, | ||
{ "label": "K31 (B7,F6)", "x": 3, "y": 1.25 }, | ||
{ "label": "K22 (B3,F7)", "x": 4, "y": 1.25 }, | ||
{ "label": "K32 (B7,F7)", "x": 5, "y": 1.25 }, | ||
{ "label": "K23 (B3,C7)", "x": 6, "y": 1.25 }, | ||
{ "label": "K33 (B7,C7)", "x": 7, "y": 1.25 }, | ||
{ "label": "K24 (B3,C6)", "x": 8, "y": 1.25 }, | ||
{ "label": "K34 (B7,C6)", "x": 9, "y": 1.25 }, | ||
{ "label": "K25 (B3,B6)", "x": 10, "y": 1.25 }, | ||
{ "label": "K35 (B7,B6)", "x": 11, "y": 1.25 }, | ||
{ "label": "K26 (B3,B5)", "x": 12, "y": 1.25 }, | ||
{ "label": "K36 (B7,B5)", "x": 13, "y": 1.25 }, | ||
{ "label": "K27 (B3,D6)", "x": 14, "y": 1.25 }, | ||
{ "label": "K37 (B7,D6)", "x": 15.25, "y": 1.25 }, | ||
{ "label": "K28 (B3,D4)", "x": 16.25, "y": 1.25 }, | ||
{ "label": "K38 (B7,D4)", "x": 17.25, "y": 1.25 }, | ||
{ "label": "K40 (D0,F4)", "x": 0, "y": 2.25, "w": 1.5 }, | ||
{ "label": "K50 (D1,F4)", "x": 1.5, "y": 2.25 }, | ||
{ "label": "K41 (D0,F6)", "x": 2.5, "y": 2.25 }, | ||
{ "label": "K51 (D1,F6)", "x": 3.5, "y": 2.25 }, | ||
{ "label": "K42 (D0,F7)", "x": 4.5, "y": 2.25 }, | ||
{ "label": "K52 (D1,F7)", "x": 5.5, "y": 2.25 }, | ||
{ "label": "K43 (D0,C7)", "x": 6.5, "y": 2.25 }, | ||
{ "label": "K53 (D1,C7)", "x": 7.5, "y": 2.25 }, | ||
{ "label": "K44 (D0,C6)", "x": 8.5, "y": 2.25 }, | ||
{ "label": "K54 (D1,C6)", "x": 9.5, "y": 2.25 }, | ||
{ "label": "K45 (D0,B6)", "x": 10.5, "y": 2.25 }, | ||
{ "label": "K55 (D1,B6)", "x": 11.5, "y": 2.25 }, | ||
{ "label": "K46 (D0,B5)", "x": 12.5, "y": 2.25 }, | ||
{ "label": "K56 (D1,B5)", "x": 13.5, "y": 2.25, "w": 1.5 }, | ||
{ "label": "K57 (D1,D6)", "x": 15.25, "y": 2.25 }, | ||
{ "label": "K48 (D0,D4)", "x": 16.25, "y": 2.25 }, | ||
{ "label": "K58 (D1,D4)", "x": 17.25, "y": 2.25 }, | ||
{ "label": "K60 (F1,F4)", "x": 0, "y": 3.25, "w": 1.75 }, | ||
{ "label": "K70 (F0,F4)", "x": 1.75, "y": 3.25 }, | ||
{ "label": "K61 (F1,F6)", "x": 2.75, "y": 3.25 }, | ||
{ "label": "K71 (F0,F6)", "x": 3.75, "y": 3.25 }, | ||
{ "label": "K62 (F1,F7)", "x": 4.75, "y": 3.25 }, | ||
{ "label": "K72 (F0,F7)", "x": 5.75, "y": 3.25 }, | ||
{ "label": "K63 (F1,C7)", "x": 6.75, "y": 3.25 }, | ||
{ "label": "K73 (F0,C7)", "x": 7.75, "y": 3.25 }, | ||
{ "label": "K64 (F1,C6)", "x": 8.75, "y": 3.25 }, | ||
{ "label": "K74 (F0,C6)", "x": 9.75, "y": 3.25 }, | ||
{ "label": "K65 (F1,B6)", "x": 10.75, "y": 3.25 }, | ||
{ "label": "K75 (F0,B6)", "x": 11.75, "y": 3.25 }, | ||
{ "label": "K76 (F0,B5)", "x": 12.75, "y": 3.25, "w": 2.25 }, | ||
{ "label": "K80 (D7,F4)", "x": 0, "y": 4.25, "w": 1.25 }, | ||
{ "label": "K90 (B4,F4)", "x": 1.25, "y": 4.25 }, | ||
{ "label": "K81 (D7,F6)", "x": 2.25, "y": 4.25 }, | ||
{ "label": "K91 (B4,F6)", "x": 3.25, "y": 4.25 }, | ||
{ "label": "K82 (D7,F7)", "x": 4.25, "y": 4.25 }, | ||
{ "label": "K92 (B4,F7)", "x": 5.25, "y": 4.25 }, | ||
{ "label": "K83 (D7,C7)", "x": 6.25, "y": 4.25 }, | ||
{ "label": "K93 (B4,C7)", "x": 7.25, "y": 4.25 }, | ||
{ "label": "K84 (D7,C6)", "x": 8.25, "y": 4.25 }, | ||
{ "label": "K94 (B4,C6)", "x": 9.25, "y": 4.25 }, | ||
{ "label": "K85 (D7,B6)", "x": 10.25, "y": 4.25 }, | ||
{ "label": "K95 (B4,B6)", "x": 11.25, "y": 4.25 }, | ||
{ "label": "K86 (D7,B5)", "x": 12.25, "y": 4.25, "w": 1.75 }, | ||
{ "label": "K96 (B4,B5)", "x": 14, "y": 4.25 }, | ||
{ "label": "K88 (D7,D4)", "x": 16.25, "y": 4.25 }, | ||
{ "label": "KA0 (D5,F4)", "x": 0, "y": 5.25, "w": 1.5 }, | ||
{ "label": "KB0 (D3,F4)", "x": 1.5, "y": 5.25 }, | ||
{ "label": "KA1 (D5,F6)", "x": 2.5, "y": 5.25, "w": 1.5 }, | ||
{ "label": "KB3 (D3,C7)", "x": 4, "y": 5.25, "w": 7 }, | ||
{ "label": "KA6 (D5,B5)", "x": 11, "y": 5.25, "w": 1.5 }, | ||
{ "label": "KB6 (D3,B5)", "x": 12.5, "y": 5.25 }, | ||
{ "label": "KA7 (D5,D6)", "x": 13.5, "y": 5.25, "w": 1.5 }, | ||
{ "label": "KB7 (D3,D6)", "x": 15.25, "y": 5.25 }, | ||
{ "label": "KA8 (D5,D4)", "x": 16.25, "y": 5.25 }, | ||
{ "label": "KB8 (D3,D4)", "x": 17.25, "y": 5.25 } | ||
] | ||
} | ||
} | ||
} |
30 changes: 30 additions & 0 deletions
30
keyboards/sawnsprojects/amber80/solder/keymaps/default/keymap.c
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,30 @@ | ||
/* Copyright 2022 SawnsProjects | ||
* | ||
* This program is free software: you can redistribute it and/or modify | ||
* it under the terms of the GNU General Public License as published by | ||
* the Free Software Foundation, either version 2 of the License, or | ||
* (at your option) any later version. | ||
* | ||
* This program is distributed in the hope that it will be useful, | ||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
* GNU General Public License for more details. | ||
* | ||
* You should have received a copy of the GNU General Public License | ||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | ||
*/ | ||
#include QMK_KEYBOARD_H | ||
|
||
|
||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | ||
|
||
[0] = LAYOUT_all( | ||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS, | ||
|
||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, | ||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, | ||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | ||
KC_LSFT, KC_KANA, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, | ||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT | ||
) | ||
}; |
1 change: 1 addition & 0 deletions
1
keyboards/sawnsprojects/amber80/solder/keymaps/default/readme.md
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1 @@ | ||
# The default keymap for Amber80 Solder |
54 changes: 54 additions & 0 deletions
54
keyboards/sawnsprojects/amber80/solder/keymaps/via/keymap.c
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,54 @@ | ||
/* Copyright 2022 SawnsProjects | ||
* | ||
* This program is free software: you can redistribute it and/or modify | ||
* it under the terms of the GNU General Public License as published by | ||
* the Free Software Foundation, either version 2 of the License, or | ||
* (at your option) any later version. | ||
* | ||
* This program is distributed in the hope that it will be useful, | ||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
* GNU General Public License for more details. | ||
* | ||
* You should have received a copy of the GNU General Public License | ||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | ||
*/ | ||
#include QMK_KEYBOARD_H | ||
|
||
|
||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | ||
|
||
[0] = LAYOUT_all( | ||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS, | ||
|
||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, | ||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, | ||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | ||
KC_LSFT, KC_KANA, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, | ||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT | ||
), | ||
[1] = LAYOUT_all( | ||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | ||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | ||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | ||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | ||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | ||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | ||
), | ||
[2] = LAYOUT_all( | ||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | ||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | ||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | ||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | ||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | ||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | ||
), | ||
[3] = LAYOUT_all( | ||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | ||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | ||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | ||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | ||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | ||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | ||
) | ||
}; |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1 @@ | ||
# The VIA keymap for Amber80 Solder |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,2 @@ | ||
VIA_ENABLE = yes | ||
LTO_ENABLE = yes |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,24 @@ | ||
# Amber80 solder | ||
|
||
![Amber80](https://i.imgur.com/ygUgpqZh.jpg) | ||
|
||
A TKL keyboard sold in several variants. | ||
|
||
* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan) | ||
* Hardware Supported: Amber80 | ||
* Hardware Availability: Comming Soon | ||
|
||
Make example for this keyboard (after setting up your build environment): | ||
|
||
make sawnsprojects/amber80/solder:default | ||
|
||
|
||
## Bootloader | ||
|
||
Enter the bootloader in 3 ways: | ||
|
||
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard | ||
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead | ||
* **Keycode in layout**: Press the key mapped to `RESET` if it is available | ||
|
||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,18 @@ | ||
# MCU name | ||
MCU = atmega32u4 | ||
|
||
# Bootloader selection | ||
BOOTLOADER = atmel-dfu | ||
|
||
# Build Options | ||
# change yes to no to disable | ||
# | ||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite | ||
MOUSEKEY_ENABLE = no # Mouse keys | ||
EXTRAKEY_ENABLE = yes # Audio control and System control | ||
CONSOLE_ENABLE = yes # Console for debug | ||
COMMAND_ENABLE = yes # Commands for debug and configuration | ||
NKRO_ENABLE = no # Enable N-Key Rollover | ||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | ||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow | ||
AUDIO_ENABLE = no # Audio output |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,17 @@ | ||
/* Copyright 2022 SawnsProjects | ||
* | ||
* This program is free software: you can redistribute it and/or modify | ||
* it under the terms of the GNU General Public License as published by | ||
* the Free Software Foundation, either version 2 of the License, or | ||
* (at your option) any later version. | ||
* | ||
* This program is distributed in the hope that it will be useful, | ||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
* GNU General Public License for more details. | ||
* | ||
* You should have received a copy of the GNU General Public License | ||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | ||
*/ | ||
|
||
#include "solder.h" |
Oops, something went wrong.