Add soy20 PCB

keyboards/soy20/config.h

@@ -0,0 +1,45 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4452 // "DR" short for DrewKeys
+#define PRODUCT_ID      0x534f // "SO" short for Soy
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    drewkeys
+#define PRODUCT         soy20
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 4
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4 }
+#define MATRIX_COL_PINS { B5, B6, B7, C7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 0
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif

keyboards/soy20/info.json

@@ -0,0 +1,33 @@
+{
+    "keyboard_name": "Soy20",
+    "url": "",
+    "maintainer": "twholt",
+    "width": 4,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_ortho_5x4": {
+            "layout": [
+                {"label":"K00 (B0,B5)", "x":0, "y":0},
+                {"label":"K01 (B0,B6)", "x":1, "y":0},
+                {"label":"K02 (B0,B7)", "x":2, "y":0},
+                {"label":"K03 (B0,C7)", "x":3, "y":0},
+                {"label":"K10 (B1,B5)", "x":0, "y":1},
+                {"label":"K11 (B1,B6)", "x":1, "y":1},
+                {"label":"K12 (B1,B7)", "x":2, "y":1},
+                {"label":"K13 (B1,C7)", "x":3, "y":1},
+                {"label":"K20 (B2,B5)", "x":0, "y":2},
+                {"label":"K21 (B2,B6)", "x":1, "y":2},
+                {"label":"K22 (B2,B7)", "x":2, "y":2},
+                {"label":"K23 (B2,C7)", "x":3, "y":2},
+                {"label":"K30 (B3,B5)", "x":0, "y":3},
+                {"label":"K31 (B3,B6)", "x":1, "y":3},
+                {"label":"K32 (B3,B7)", "x":2, "y":3},
+                {"label":"K33 (B3,C7)", "x":3, "y":3},
+                {"label":"K40 (B4,B5)", "x":0, "y":4},
+                {"label":"K41 (B4,B6)", "x":1, "y":4},
+                {"label":"K42 (B4,B7)", "x":2, "y":4},
+                {"label":"K43 (B4,C7)", "x":3, "y":4}
+            ]
+        }
+    }
+}

keyboards/soy20/keymaps/default/keymap.c

@@ -0,0 +1,19 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[0] = LAYOUT_ortho_5x4(
+		KC_PMNS, KC_PAST, KC_PSLS, MO(1),
+		KC_PPLS, KC_P9, KC_P8, KC_P7,
+		KC_TAB, KC_P5, KC_P6, KC_P4,
+		KC_PENT, KC_P3, KC_P2, KC_P1,
+		KC_DEL, KC_SCLN, KC_PDOT, KC_P0),
+
+	[1] = LAYOUT_ortho_5x4(
+		KC_NLCK, KC_PSCR, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, RESET),
+
+};

keyboards/soy20/keymaps/via/keymap.c

@@ -0,0 +1,33 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[0] = LAYOUT_ortho_5x4(
+		KC_PMNS, KC_PAST, KC_PSLS, MO(1),
+		KC_PPLS, KC_P9, KC_P8, KC_P7,
+		KC_TAB, KC_P5, KC_P6, KC_P4,
+		KC_PENT, KC_P3, KC_P2, KC_P1,
+		KC_DEL, KC_SCLN, KC_PDOT, KC_P0),
+
+	[1] = LAYOUT_ortho_5x4(
+		KC_NLCK, KC_PSCR, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, RESET),
+
+	[2] = LAYOUT_ortho_5x4(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	[3] = LAYOUT_ortho_5x4(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};

keyboards/soy20/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/soy20/readme.md

@@ -0,0 +1,13 @@
+# Soy20
+
+A 4x5 keypad created by drewkeys
+
+* Keyboard Maintainer: [Friend-Or-F0H](https://github.com/Friend-Or-F0H)
+* Hardware Supported: drewkeys Soy20 PCB
+* Hardware Availability: Limited GB
+
+Make example for this keyboard (after setting up your build environment):
+
+    make soy20:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/soy20/rules.mk

@@ -0,0 +1,24 @@
+# MCU name
+MCU = atmega32u2
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = full     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+
+LAYOUTS = ortho_5x4

keyboards/soy20/soy20.c

@@ -0,0 +1 @@
+#include "soy20.h"

keyboards/soy20/soy20.h

@@ -0,0 +1,17 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_ortho_5x4( \
+	K00, K01, K02, K03, \
+	K10, K11, K12, K13, \
+	K20, K21, K22, K23, \
+	K30, K31, K32, K33, \
+	K40, K41, K42, K43  \
+) { \
+	{ K00,   K01,   K02,   K03 }, \
+	{ K10,   K11,   K12,   K13 }, \
+	{ K20,   K21,   K22,   K23 }, \
+	{ K30,   K31,   K32,   K33 }, \
+	{ K40,   K41,   K42,   K43 }  \
+}