Use cursor position as start index for oled_write_raw and oled_write_raw_P #10800
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
…raw_P The documentation for these APIs say that they write to the buffer from the current current position, but they would always write from the start of the buffer irrespective of the current cursor.
daveallie
force-pushed
the
oled_write_raw-cursor-position
branch
from
6747467
to
45ac99f
Compare
|
@XScorpion2 If you wanted to weigh in here? |
XScorpion2
approved these changes
Nov 1, 2020
|
Good catch |
noroadsleft
approved these changes
Nov 8, 2020
drashna
approved these changes
Nov 15, 2020
noroadsleft
added a commit
that referenced
this pull request
Nov 28, 2020
* Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
xgnxs
pushed a commit
to xgnxs/qmk_firmware
that referenced
this pull request
Jan 9, 2021
* Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (qmk#10183) * Add support for soft serial to ATmega32U2 (qmk#10204) * Change MIDI velocity implementation to allow direct control of velocity value (qmk#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (qmk#10417) * Joystick 16-bit support (qmk#10439) * Per-encoder resolutions (qmk#10259) * Share button state from mousekey to pointing_device (qmk#10179) * Add hotfix for chibios keyboards not wake (qmk#10088) * Add advanced/efficient RGB Matrix Indicators (qmk#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (qmk#10206) * Add milc as a dependency and remove the installed milc (qmk#10563) * ChibiOS upgrade: early init conversions (qmk#10214) * ChibiOS upgrade: configuration file migrator (qmk#9952) * Haptic and solenoid cleanup (qmk#9700) * XD75 cleanup (qmk#10524) * OLED display update interval support (qmk#10388) * Add definition based on currently-selected serial driver. (qmk#10716) * New feature: Retro Tapping per key (qmk#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (qmk#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (qmk#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (qmk#8669) * Minor change to behavior allowing display updates to continue between task ticks (qmk#10750) * Some GPIO manipulations in matrix.c change to atomic. (qmk#10491) * qmk cformat (qmk#10767) * [Keyboard] Update the Speedo firmware for v3.0 (qmk#10657) * Maartenwut/Maarten namechange to evyd13/Evy (qmk#10274) * [quantum] combine repeated lines of code (qmk#10837) * Add step sequencer feature (qmk#9703) * aeboards/ext65 refactor (qmk#10820) * Refactor xelus/dawn60 for Rev2 later (qmk#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (qmk#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (qmk#10549) * update chibios os usb for the otg driver (qmk#8893) * Remove HD44780 References, Part 4 (qmk#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (qmk#10512) * Fix cursor position bug in oled_write_raw functions (qmk#10800) * Fixup version.h writing when using SKIP_VERSION=yes (qmk#10972) * Allow for certain code in the codebase assuming length of string. (qmk#10974) * Add AT90USB support for serial.c (qmk#10706) * Auto shift: support repeats and early registration (qmk#9826) * Rename ledmatrix.h to match .c file (qmk#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (qmk#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (qmk#10840) * Merge point for 2020 Nov 28 Breaking Change
drashna
pushed a commit
to zsa/qmk_firmware
that referenced
this pull request
Jan 13, 2021
* Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (qmk#10183) * Add support for soft serial to ATmega32U2 (qmk#10204) * Change MIDI velocity implementation to allow direct control of velocity value (qmk#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (qmk#10417) * Joystick 16-bit support (qmk#10439) * Per-encoder resolutions (qmk#10259) * Share button state from mousekey to pointing_device (qmk#10179) * Add hotfix for chibios keyboards not wake (qmk#10088) * Add advanced/efficient RGB Matrix Indicators (qmk#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (qmk#10206) * Add milc as a dependency and remove the installed milc (qmk#10563) * ChibiOS upgrade: early init conversions (qmk#10214) * ChibiOS upgrade: configuration file migrator (qmk#9952) * Haptic and solenoid cleanup (qmk#9700) * XD75 cleanup (qmk#10524) * OLED display update interval support (qmk#10388) * Add definition based on currently-selected serial driver. (qmk#10716) * New feature: Retro Tapping per key (qmk#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (qmk#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (qmk#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (qmk#8669) * Minor change to behavior allowing display updates to continue between task ticks (qmk#10750) * Some GPIO manipulations in matrix.c change to atomic. (qmk#10491) * qmk cformat (qmk#10767) * [Keyboard] Update the Speedo firmware for v3.0 (qmk#10657) * Maartenwut/Maarten namechange to evyd13/Evy (qmk#10274) * [quantum] combine repeated lines of code (qmk#10837) * Add step sequencer feature (qmk#9703) * aeboards/ext65 refactor (qmk#10820) * Refactor xelus/dawn60 for Rev2 later (qmk#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (qmk#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (qmk#10549) * update chibios os usb for the otg driver (qmk#8893) * Remove HD44780 References, Part 4 (qmk#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (qmk#10512) * Fix cursor position bug in oled_write_raw functions (qmk#10800) * Fixup version.h writing when using SKIP_VERSION=yes (qmk#10972) * Allow for certain code in the codebase assuming length of string. (qmk#10974) * Add AT90USB support for serial.c (qmk#10706) * Auto shift: support repeats and early registration (qmk#9826) * Rename ledmatrix.h to match .c file (qmk#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (qmk#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (qmk#10840) * Merge point for 2020 Nov 28 Breaking Change
Closed
3 tasks
BorisTestov
pushed a commit
to BorisTestov/qmk_firmware
that referenced
this pull request
May 23, 2024
* Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (qmk#10183) * Add support for soft serial to ATmega32U2 (qmk#10204) * Change MIDI velocity implementation to allow direct control of velocity value (qmk#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (qmk#10417) * Joystick 16-bit support (qmk#10439) * Per-encoder resolutions (qmk#10259) * Share button state from mousekey to pointing_device (qmk#10179) * Add hotfix for chibios keyboards not wake (qmk#10088) * Add advanced/efficient RGB Matrix Indicators (qmk#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (qmk#10206) * Add milc as a dependency and remove the installed milc (qmk#10563) * ChibiOS upgrade: early init conversions (qmk#10214) * ChibiOS upgrade: configuration file migrator (qmk#9952) * Haptic and solenoid cleanup (qmk#9700) * XD75 cleanup (qmk#10524) * OLED display update interval support (qmk#10388) * Add definition based on currently-selected serial driver. (qmk#10716) * New feature: Retro Tapping per key (qmk#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (qmk#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (qmk#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (qmk#8669) * Minor change to behavior allowing display updates to continue between task ticks (qmk#10750) * Some GPIO manipulations in matrix.c change to atomic. (qmk#10491) * qmk cformat (qmk#10767) * [Keyboard] Update the Speedo firmware for v3.0 (qmk#10657) * Maartenwut/Maarten namechange to evyd13/Evy (qmk#10274) * [quantum] combine repeated lines of code (qmk#10837) * Add step sequencer feature (qmk#9703) * aeboards/ext65 refactor (qmk#10820) * Refactor xelus/dawn60 for Rev2 later (qmk#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (qmk#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (qmk#10549) * update chibios os usb for the otg driver (qmk#8893) * Remove HD44780 References, Part 4 (qmk#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (qmk#10512) * Fix cursor position bug in oled_write_raw functions (qmk#10800) * Fixup version.h writing when using SKIP_VERSION=yes (qmk#10972) * Allow for certain code in the codebase assuming length of string. (qmk#10974) * Add AT90USB support for serial.c (qmk#10706) * Auto shift: support repeats and early registration (qmk#9826) * Rename ledmatrix.h to match .c file (qmk#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (qmk#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (qmk#10840) * Merge point for 2020 Nov 28 Breaking Change
BorisTestov
pushed a commit
to BorisTestov/qmk_firmware
that referenced
this pull request
May 23, 2024
The documentation for these APIs say that they write to the buffer from the current current position, but they would always write from the start of the buffer irrespective of the current cursor.
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
The documentation for these APIs say that they write to the buffer from the current cursor position, but they would always write from the start of the buffer irrespective of the current cursor.
Description
Use the current cursor position as the start location to write the raw data to the oled buffer.
Docs: https://github.com/qmk/qmk_firmware/blob/master/docs/feature_oled_driver.md#L283-L290
Types of Changes
Issues Fixed or Closed by This PR
Checklist