refactor: mechwild/bbs

keyboards/mechwild/bbs/config.h

@@ -3,23 +3,6 @@
 
 #pragma once
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
+#define WS2812_PWM_DRIVER PWMD4
+#define WS2812_PWM_CHANNEL 4
+#define WS2812_PWM_DMA_STREAM STM32_DMA1_STREAM6

keyboards/mechwild/bbs/halconf.h

@@ -0,0 +1,8 @@
+// Copyright 2024 QMK Contributors (@qmk)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#define HAL_USE_PWM TRUE
+
+#include_next <halconf.h>

keyboards/mechwild/bbs/keyboard.json

@@ -1,29 +1,60 @@
 {
-    "keyboard_name": "BB Steno",
     "manufacturer": "MechWild",
+    "keyboard_name": "BB Steno",
     "maintainer": "kylemccreery",
-    "url": "https://mechwild.com/product/bb-steno/",
-    "usb": {
-        "vid": "0x6D77",
-        "pid": "0x170E",
-        "device_version": "0.0.1",
-        "force_nkro": true
-    },
-    "matrix_pins": {
-        "cols": ["B0", "A7", "A6", "A5", "A4", "A3"],
-        "rows": ["B12", "B10", "B13", "B1", "B14"]
-    },
+    "bootloader_instructions": "Hold down the BOOT button, then tap the NRST button on the BlackPill. Avoid touching the A11 and A12 pins.",
+    "development_board": "blackpill_f401",
     "diode_direction": "COL2ROW",
     "dip_switch": {
         "pins": ["A0"]
     },
+    "features": {
+        "bootmagic": true,
+        "dip_switch": true,
+        "nkro": true,
+        "rgblight": true,
+        "steno": true
+    },
     "indicators": {
         "caps_lock": "C13",
         "on_state": 0
     },
-    "processor": "STM32F401",
-    "bootloader": "stm32-dfu",
-    "board": "BLACKPILL_STM32_F401",
+    "matrix_pins": {
+        "cols": ["B0", "A7", "A6", "A5", "A4", "A3"],
+        "rows": ["B12", "B10", "B13", "B1", "B14"]
+    },
+    "rgblight": {
+        "animations": {
+            "alternating": true,
+            "breathing": true,
+            "christmas": true,
+            "knight": true,
+            "rainbow_mood": true,
+            "rainbow_swirl": true,
+            "rgb_test": true,
+            "snake": true,
+            "static_gradient": true,
+            "twinkle": true
+        },
+        "brightness_steps": 8,
+        "led_count": 6,
+        "saturation_steps": 8,
+        "sleep": true
+    },
+    "url": "https://mechwild.com/product/bb-steno/",
+    "usb": {
+        "device_version": "1.1.0",
+        "force_nkro": true,
+        "pid": "0x170E",
+        "shared_endpoint": {
+            "keyboard": true
+        },
+        "vid": "0x6D77"
+    },
+    "ws2812": {
+        "driver": "pwm",
+        "pin": "B9"
+    },
     "layouts": {
         "LAYOUT": {
             "layout": [
@@ -33,32 +64,27 @@
                 {"matrix": [0, 3], "x": 3, "y": 0},
                 {"matrix": [0, 4], "x": 4, "y": 0.125},
                 {"matrix": [0, 5], "x": 5, "y": 0.125},
-
                 {"matrix": [1, 0], "x": 6.75, "y": 0.125},
                 {"matrix": [1, 1], "x": 7.75, "y": 0.125},
                 {"matrix": [1, 2], "x": 8.75, "y": 0},
                 {"matrix": [1, 3], "x": 9.75, "y": 0.125},
                 {"matrix": [1, 4], "x": 10.75, "y": 0.375},
                 {"matrix": [1, 5], "x": 11.75, "y": 0.375},
-
                 {"matrix": [2, 0], "x": 0, "y": 1.375},
                 {"matrix": [2, 1], "x": 1, "y": 1.375},
                 {"matrix": [2, 2], "x": 2, "y": 1.125},
                 {"matrix": [2, 3], "x": 3, "y": 1},
                 {"matrix": [2, 4], "x": 4, "y": 1.125},
                 {"matrix": [2, 5], "x": 5, "y": 1.125},
-
                 {"matrix": [3, 0], "x": 6.75, "y": 1.125},
                 {"matrix": [3, 1], "x": 7.75, "y": 1.125},
                 {"matrix": [3, 2], "x": 8.75, "y": 1},
                 {"matrix": [3, 3], "x": 9.75, "y": 1.125},
                 {"matrix": [3, 4], "x": 10.75, "y": 1.375},
                 {"matrix": [3, 5], "x": 11.75, "y": 1.375},
-
                 {"matrix": [4, 3], "x": 2.75, "y": 3.125, "h": 1.5},
                 {"matrix": [4, 4], "x": 3.75, "y": 3.125, "h": 1.5},
                 {"matrix": [4, 5], "x": 4.75, "y": 2.875, "h": 1.5},
-
                 {"matrix": [4, 0], "x": 7, "y": 2.875, "h": 1.5},
                 {"matrix": [4, 1], "x": 8, "y": 3.125, "h": 1.5},
                 {"matrix": [4, 2], "x": 9, "y": 3.125, "h": 1.5}

keyboards/mechwild/bbs/keymaps/default/keymap.c

@@ -3,22 +3,11 @@
 
 #include QMK_KEYBOARD_H
 
-// Defines names for use in layer keycodes and the keymap
-enum layer_names {
-    _BASE,
-    _FN1
-};
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Base */
-    [_BASE] = LAYOUT(
+    [0] = LAYOUT(
     STN_RES1, STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1,     STN_ST3, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR,
     STN_RES2, STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2,     STN_ST4, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR,
                                STN_A,  STN_O,  STN_N1,      STN_N2,  STN_E,  STN_U
-    ),
-    [_FN1] = LAYOUT(                                                                                   
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-                               KC_TRNS, KC_TRNS, KC_TRNS,     KC_TRNS, KC_TRNS, KC_TRNS
     )
 };

keyboards/mechwild/bbs/mcuconf.h

@@ -0,0 +1,9 @@
+// Copyright 2024 QMK Contributors (@qmk)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_PWM_USE_TIM4
+#define STM32_PWM_USE_TIM4                  TRUE

keyboards/mechwild/bbs/readme.md

@@ -5,7 +5,8 @@
 A bare-bones stenography keyboard. No bells or whistles. Simple, cheap, effective, steno.
 
 * Keyboard Maintainer: [Kyle McCreery](https://github.com/kylemccreery)
-* Hardware Supported: BBS v0.1
+* Hardware Supported: BBS v0.1, v1.1
+  * v0.1 PCBs were miswired for WS2812 RGB LED strips. As the data pin is the same, a strip could still be added with some handwiring.
 * Hardware Availability: [BBS on MechWild](https://mechwild.com/product/bb-steno/)
 
 Make example for this keyboard (after setting up your build environment):