Add Orbit-X Keyboard

keyboards/ai03/orbit_x/config.h

@@ -0,0 +1,175 @@
+/*
+Copyright 2019 Ryota Goto
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xA103
+#define PRODUCT_ID 0x0014
+#define DEVICE_VER 0x0001
+#define MANUFACTURER ai03 Design Studio
+#define PRODUCT OrbitX
+#define DESCRIPTION High-end compact ergonomic keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 8 // Double the rows for split 
+#define MATRIX_COLS 6
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D7, D6, D4, F0 }
+#define MATRIX_COL_PINS { E6, F6, B1, B0, C7, C6 }
+#define MATRIX_ROW_PINS_RIGHT { B5, D7, B4, D4 }
+#define MATRIX_COL_PINS_RIGHT { D6, B6, B1, B0, B3, B2 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+#define SPLIT_HAND_PIN D5
+#define SPLIT_USB_DETECT
+#define SPLIT_USB_TIMEOUT 2500
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#ifndef LINK_TIME_OPTIMIZATION_ENABLE
+  #define NO_ACTION_MACRO
+  #define NO_ACTION_FUNCTION
+#endif
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/ai03/orbit_x/info.json

@@ -0,0 +1,61 @@
+{
+    "keyboard_name": "Orbit-X", 
+    "url": "", 
+    "maintainer": "ai03", 
+    "width": 13.5, 
+    "height": 4.38, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"x":0, "y":0.38},
+                {"x":1, "y":0.38},
+                {"x":2, "y":0.13},
+                {"x":3, "y":0},
+                {"x":4, "y":0.13},
+                {"x":5, "y":0.25},
+                {"x":7.5, "y":0.25},
+                {"x":8.5, "y":0.13},
+                {"x":9.5, "y":0},
+                {"x":10.5, "y":0.13},
+                {"x":11.5, "y":0.38},
+                {"x":12.5, "y":0.38},
+                {"x":0, "y":1.38},
+                {"x":1, "y":1.38},
+                {"x":2, "y":1.13},
+                {"x":3, "y":1.0},
+                {"x":4, "y":1.13},
+                {"x":5, "y":1.25},
+                {"x":7.5, "y":1.25},
+                {"x":8.5, "y":1.13},
+                {"x":9.5, "y":1.0},
+                {"x":10.5, "y":1.13},
+                {"x":11.5, "y":1.38},
+                {"x":12.5, "y":1.38},
+                {"x":0, "y":2.38},
+                {"x":1, "y":2.38},
+                {"x":2, "y":2.13},
+                {"x":3, "y":2},
+                {"x":4, "y":2.13},
+                {"x":5, "y":2.25},
+                {"x":7.5, "y":2.25},
+                {"x":8.5, "y":2.13},
+                {"x":9.5, "y":2},
+                {"x":10.5, "y":2.13},
+                {"x":11.5, "y":2.38},
+                {"x":12.5, "y":2.38},
+                {"x":0, "y":3.38},
+                {"x":1, "y":3.38},
+                {"x":2, "y":3.13},
+                {"x":3, "y":3},
+                {"x":4.25, "y":3.38},
+                {"x":5.25, "y":3.25, "h":1.5},
+                {"x":7.25, "y":3.25, "h":1.5},
+                {"x":8.25, "y":3.38},
+                {"x":9.5, "y":3},
+                {"x":10.5, "y":3.13},
+                {"x":11.5, "y":3.38},
+                {"x":12.5, "y":3.38}
+            ]
+        }
+    }
+}

keyboards/ai03/orbit_x/keymaps/default/keymap.c

@@ -0,0 +1,59 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _NUM,
+    _NAV,
+    _FN
+};
+
+/*
+    L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+    L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+    L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+    L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35  \
+*/
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [_BASE] = LAYOUT(
+        KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT, 
+        MO(3),   KC_TAB,  KC_LGUI, KC_LALT, MO(2),   KC_SPC,  KC_SPC,  MO(1),   KC_TAB,  KC_DEL,  KC_PSCR, MO(3)
+    ),
+    [_NUM] = LAYOUT(
+        _______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______, 
+        _______, KC_GRV,  KC_SLSH, KC_LBRC, KC_LPRN, KC_MINS, KC_EQL,  KC_RPRN, KC_RBRC, KC_BSLS, XXXXXXX, _______, 
+        _______, KC_TILD, KC_QUES, KC_LCBR, XXXXXXX, KC_UNDS, KC_PLUS, XXXXXXX, KC_RCBR, KC_PIPE, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+    ),
+    [_NAV] = LAYOUT(
+        _______, XXXXXXX, XXXXXXX, KC_PGUP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UP,   XXXXXXX, XXXXXXX, _______,
+        _______, XXXXXXX, KC_HOME, KC_PGDN, KC_END,  XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, _______,
+        _______, XXXXXXX, C(G(KC_LEFT)), XXXXXXX, C(G(KC_RGHT)), XXXXXXX, XXXXXXX, C(S(KC_TAB)), XXXXXXX, C(KC_TAB), XXXXXXX, _______, 
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+    ),
+    [_FN] = LAYOUT(
+        RESET,   XXXXXXX, KC_F1,   KC_F2,   KC_F3,   XXXXXXX, XXXXXXX, KC_F7,   KC_F8,   KC_F9,   XXXXXXX, RESET,
+        _______, XXXXXXX, KC_F4,   KC_F5,   KC_F6,   XXXXXXX, XXXXXXX, KC_F10,  KC_F11,  KC_F12,  XXXXXXX, _______,
+        _______, XXXXXXX, KC_VOLD, XXXXXXX, KC_VOLU, XXXXXXX, XXXXXXX, KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, _______, 
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+    )
+};

keyboards/ai03/orbit_x/keymaps/default/readme.md

@@ -0,0 +1,3 @@
+# The default keymap for orbit_x
+
+Basic keymap that works well in most cases.

keyboards/ai03/orbit_x/keymaps/via/keymap.c

@@ -0,0 +1,59 @@
+/* Copyright 2020 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _NUM,
+    _NAV,
+    _FN
+};
+
+/*
+    L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+    L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+    L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+    L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35  \
+*/
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [_BASE] = LAYOUT(
+        KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT, 
+        MO(3),   KC_TAB,  KC_LGUI, KC_LALT, MO(2),   KC_SPC,  KC_SPC,  MO(1),   KC_TAB,  KC_DEL,  KC_PSCR, MO(3)
+    ),
+    [_NUM] = LAYOUT(
+        _______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______, 
+        _______, KC_GRV,  KC_SLSH, KC_LBRC, KC_LPRN, KC_MINS, KC_EQL,  KC_RPRN, KC_RBRC, KC_BSLS, XXXXXXX, _______, 
+        _______, KC_TILD, KC_QUES, KC_LCBR, XXXXXXX, KC_UNDS, KC_PLUS, XXXXXXX, KC_RCBR, KC_PIPE, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+    ),
+    [_NAV] = LAYOUT(
+        _______, XXXXXXX, XXXXXXX, KC_PGUP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UP,   XXXXXXX, XXXXXXX, _______,
+        _______, XXXXXXX, KC_HOME, KC_PGDN, KC_END,  XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, _______,
+        _______, XXXXXXX, C(G(KC_LEFT)), XXXXXXX, C(G(KC_RGHT)), XXXXXXX, XXXXXXX, C(S(KC_TAB)), XXXXXXX, C(KC_TAB), XXXXXXX, _______, 
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+    ),
+    [_FN] = LAYOUT(
+        RESET,   XXXXXXX, KC_F1,   KC_F2,   KC_F3,   XXXXXXX, XXXXXXX, KC_F7,   KC_F8,   KC_F9,   XXXXXXX, RESET,
+        _______, XXXXXXX, KC_F4,   KC_F5,   KC_F6,   XXXXXXX, XXXXXXX, KC_F10,  KC_F11,  KC_F12,  XXXXXXX, _______,
+        _______, XXXXXXX, KC_VOLD, XXXXXXX, KC_VOLU, XXXXXXX, XXXXXXX, KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, _______, 
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+    )
+};

keyboards/ai03/orbit_x/keymaps/via/readme.md

@@ -0,0 +1,2 @@
+# The via keymap for orbit_x
+For use with VIA configurator only

keyboards/ai03/orbit_x/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/ai03/orbit_x/orbit_x.c

@@ -0,0 +1,18 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "orbit_x.h"
+