Blitzwolf SHP6
Blitzwolf SHP6 is a smart plug, featuring:
- one remotely controllable socket
- power metering
By default, it runs Tuya proprietary firmware.
The following models are available:
- 2300W (10A)
- 3450W (15A)
Provisioning configuration names:
- flash mode: DOUT
- flash frequency: 40MHz
| Number | Function | Remarks |
|---|---|---|
| 0 | on/off LED | active low |
| 2 | status LED | active low |
| 4 | BL0937 CF1 | only 10A model |
| 5 | BL0937 CF | |
| 12 | BL0937 SEL | |
| 13 | push button | active low |
| 14 | BL0937 CF1 | only 15A model |
| 15 | relay | active high |
| Id | Type | Description | Range/Unit | Remarks |
|---|---|---|---|---|
push_button |
boolean | on/off button, setup button | ||
led |
boolean | on/off LED | ||
relay |
boolean | relay | ||
active_power |
number | active power | W | needs calibration |
energy |
number | energy | Wh | needs calibration |
current |
number | current | A | needs calibration |
voltage |
number | voltage | V | needs calibration |
power_calib |
number | power & energy calibration factor | ||
voltage_calib |
number | voltage calibration factor | ||
current_calib |
number | current calibration factor | ||
apparent_power |
number | apparent power | VA | |
power_factor |
number | power factor | 0..100 % |
- flash mode: DOUT
- flash frequency: 40MHz
Follow the Tuya Convert OS procedure.
You can now power your device by connecting it to mains. Follow the initial setup instructions to connect the device to Wi-Fi and add it to your qToggle system.