a fork to collect my changes to the Voron design. WIP at this point and untested but the changes are somewhat minor
##changes
increased volume - 300x300x300 (ish, lose some z axis as described below)
bed supports
modular steps updated to support anti-backlash delrin leadscrew nuts. For modded parts I've posted 123dx files and STLs. Also have an untested modification of the non-modular one if that's your thing.
electronics
currently using RADDS 1.5 w/ silentstepsticks but hopefully will be using my version of RAMPS-FDsoon (once the kinks are worked out, on my git). Have modded the RADDS a bit with better headers and a converter for the RRD-graphic LCD
color mixing hotend support
added mount for the diamond hotend, different extruder design and 3 extruders for color mixing purposes (hopefully 5 soon for full color!). Kept it in line with the modular format used so it should be fairly easy to swap in a different hotend (I have an extra e3dv6-lite for this). 2 reasons: 1 being the diamond brings a lot of complexity so if it's not needed I prefer to avoid it and 2 being that the diamond is HUGE and you lose a bit of z axis as a result
extruder being used is located here
software
using repetier instead of marlin for color mixing and due board support - untested but configuration should work?
other
using the excellent bed knobs by bhstibal
considering using hall effect endstops
using dc42s diff IR endstop instead of the inductive ones which kind of suck IMO. if you use the diff IR it is beneficial to paint the PEI black with high temp paint (like the kind of grills or engines)
using e3d pt-100 for hotends, using the e3d cartridge thermistor on the bed
adding a thermal fuse to the bed
##TODO: Printer enclosure
RADDS enclosure - would like an enclosure that could hold RADDS, due, a pi zero for octoprint, and a header for powering accessories. Ideally in the style of the voron RAMPS enclosure
Camera mount
Filament Jam sensor and the possible modifications needed to firmware to make such a thing work with multiple filament extruders
#original readme
Reddit: /r/voroncorexy
Firmware, plans, and parts for VORON RepRap printer
Apr 30, 2016:
REV C Parts are pushed (STL and STEP). Parts included in this release:
- Improved Bed Carriage
- V1-to-REV C leadscrew adapter (for those who already printed v1)
- Improved RAMPs Case
- Improved Power Box (and mirror of v1 as default)
Apr 22, 2016:
Massive update to the manual. All motion system are done. Next is filamnt systems, and wiring.
Also, added a BSP adapter for E3D Titan.
In other news, we have a sub-reddit now! Link at the top of the page.
Apr 19, 2016:
Updated the BOM to reflect the REV B components. Link updated.
Apr 17, 2016:
REV B Carriage is up. Belt tensioning every each way. I've cleaned up the folder to get rid of some older stuff nobody should be using now anyway.
Description of changes here: http://imgur.com/a/EneHq
Apr 15, 2016:
Quick update: The manual stalled out due to work on REV B of the X Carriage. At I started writing down the process, I became convinced belt tensioning is a thing that needs to happen. So I'm bringing back a version of what I had on the prototype printer. New carriage will also have a better way to mount a single E3D hot end, so you don't have to take apart X Carriage to remove it.
There are a few other special projects in the works, one of them involving E3D Titan ;)
REV B will be going up tomorrow after I have a chance to put some more QA time on it.
Apr 4, 2016:
Updated BOM to reflect some changes discussed on GitHub. Big thanks to codexmas for QA work. Checked in a PDF version of the BOM. Manual is getting closer to being finished.
Mar 22, 2016:
REV A STLs are published. Updated to the X Carriage to house a blower fan. Also updated the BOM to reflect the new configuration.
Mar 8, 2016:
ver1.0 of the STLs has been released. Happy printing.