rencrypt

Warning

This crate hasn't been audited, but it's mostly a wrapper over several libs like ring (well known and audited library),RustCrypto (AES-GCM and ChaCha20Poly1305 ciphers are audited) but also others which are NOT audited, so in principle at least the primitives should offer a similar level of security.

A Python encryption library implemented in Rust. It supports AEAD with various ciphers. It uses ring, RustCrypto (and derivatives), sodiumoxide and orion to handle encryption. If offers slightly higher speed compared to other Python libs, especially for small chunks of data (especially the Ring provider with AES-GCM ciphers). The API also tries to be easy to use but it's more optimized for speed than usability.

So if you want to use a vast variety of ciphers and/or achieve the highest possible encryption speed, consider giving it a try.

Benchmark

Some benchmarks comparing it to PyFLocker which from my benchmarks is the fastest among other Python libs like cryptography, NaCl (libsodium), PyCryptodome.

Buffer in memory

This is useful when you keep a buffer, set your plaintext/ciphertext in there, and then encrypt/decrypt in-place in that buffer. This is the most performant way to use it, because it doesn't copy any bytes nor allocate new memory. rencrypt is faster on small buffers, less than few MB, PyFLocker is coming closer for larger buffers.

Encrypt seconds

Decrypt seconds

Block size and duration in seconds

MB	rencrypt encrypt	PyFLocker encrypt	rencrypt decrypt	PyFLocker decrypt
0.03125	0.00001	0.00091	0.00001	0.00004
0.0625	0.00001	0.00005	0.00001	0.00004
0.125	0.00002	0.00005	0.00003	0.00005
0.25	0.00004	0.00008	0.00005	0.00009
0.5	0.00010	0.00014	0.00011	0.00015
1	0.00021	0.00024	0.00021	0.00029
2	0.00043	0.00052	0.00044	0.00058
4	0.00089	0.00098	0.00089	0.00117
8	0.00184	0.00190	0.00192	0.00323
16	0.00353	0.00393	0.00367	0.00617
32	0.00678	0.00748	0.00749	0.01348
64	0.01361	0.01461	0.01460	0.02697
128	0.02923	0.03027	0.03134	0.05410
256	0.06348	0.06188	0.06136	0.10417
512	0.11782	0.13463	0.12090	0.21114
1024	0.25001	0.24953	0.25377	0.42581

File

Encrypt seconds

Decrypt seconds

File size and duration in seconds

MB	rencrypt encrypt	PyFLocker encrypt	rencrypt decrypt	PyFLocker decrypt
0.031251	0.00010	0.00280	0.00004	0.00479
0.062501	0.00009	0.00218	0.00005	0.00143
0.125	0.00020	0.00212	0.00014	0.00129
0.25	0.00034	0.00232	0.00020	0.00165
0.5	0.00050	0.00232	0.00035	0.00181
1	0.00087	0.00356	0.00065	0.00248
2	0.00215	0.00484	0.00154	0.00363
4	0.00361	0.00765	0.00301	0.00736
8	0.00688	0.01190	0.00621	0.00876
16	0.01503	0.02097	0.01202	0.01583
32	0.02924	0.03642	0.02563	0.02959
64	0.05737	0.06473	0.04431	0.05287
128	0.11098	0.12646	0.08944	0.09926
256	0.22964	0.24716	0.17402	0.19420
512	0.43506	0.46444	0.38143	0.38242
1024	0.97147	0.95803	0.78137	0.87363
2048	2.07143	2.10766	1.69471	2.99210
4096	4.85395	4.69722	5.40580	8.73779
8192	10.76984	11.76741	10.29253	21.00636
16384	21.84490	26.27385	39.56230	43.55530

Hardware used in benchmarks

Laptop LG Gram 17Z90Q
SSD: 1 TB M.2 NVMe SSD (Samsung PM9A1) – 2x M.2 2280 slots
CPU: 12th Gen Intel(R) Core(TM) i7-1260P
CPU ID: GenuineIntel,6,154,3
CPU Architecture: x86_64
CPUs Online: 16
CPUs Available: 16
CPU Sibling Cores: [0-15]
CPU Sibling Threads: [0-1], [2-3], [4-5], [6-7], [8], [9], [10], [11], [12], [13], [14], [15]
Total Memory: 33.4 GB LPDDR5 5200 MHz
Linux Kernel Version: 6.9.5-1-MANJARO

Usage

There are two ways in which you can use the lib, the first one is a bit faster, the second offers a bit more flexible way to use it sacrificing a bit of performance.

With a buffer in memory: using seal_in_place()/open_in_place(), is useful when you keep a buffer (or have it from somewhere), set your plaintext/ciphertext in there, and then encrypt/decrypt in-place in that buffer. This is the most performant way to use it, because it doesn't copy any bytes nor allocate new memory. The buffer has to be a numpy array, so that it's easier for you to collect data with slices that reference to underlying data. This is because the whole buffer needs to be the size of ciphertext (which is plaintext_len + tag_len + nonce_len) but you may pass a slice of the buffer to a BufferedReader to read_into() the plaintext. If you can directly collect the data to that buffer, like BufferedReader.read_into(), this is the preferred way to go.
From some bytes into the buffer: using seal_in_place_from()/open_in_place_from(), when you have some arbitrary data that you want to work with. It will first copy those bytes to the buffer then do the operation in-place in the buffer. This is a bit slower, especially for large data, because it first needs to copy the bytes to the buffer.

block_index, aad and nonce are optional.

If nonce is not provided, on each encrypt operation (seal_in_place*()) it will generate a cryptographically secure random nonce using ChaCha20. You can also provide your own nonce. The Encrypt and decrypt with a buffer in memory section has an example.

Security

The total number of invocations of the encryption functions (seal_in_place*()) shall not exceed 2^32, including all nonce lengths and all instances of Cipher with the given key. Following this guideline, only 4,294,967,296 messages with random nonces can be encrypted under a given key. While this bound is high, it's possible to encounter in practice, and systems which might reach it should consider alternatives to purely random nonces, like a counter or a combination of a random nonce + counter.
When encrypting more than one block you should provide block_index as it's more secure because it ensures the order of the blocks was not changed in ciphertext.
When you encrypt files it's more secure to generate a random number per file and include that in AAD, this will prevent ciphertext blocks from being swapped between files.
For security reasons it's a good practice to lock the memory with mlock() in which you keep sensitive data like passwords or encrryption keys, or any other plaintext sensitive content. Also it's important to zeroize the data when not used anymore.
In the case of Copy-on-write fork you need to zeroize the memory before forking the child process. An example using zeroize-python is mentioned below.

Encryption providers and algorithms (ciphers)

You will notice in the examples we create the Cipher from something like this cipher_meta = CipherMeta.Ring(RingAlgorithm.Aes256Gcm). The first part CipherMeta.Ring is the encryption provider. The last part is the algorithm for that provider, in this case Aes256Gcm. Each provider might expose specific algorithms.

Providers

enum CipherMeta {
    Ring { alg: RingAlgorithm },
    RustCrypto { alg: RustCryptoAlgorithm },
    Sodiumoxide { alg: SodiumoxideAlgorithm },
    Orion { alg: OrionAlgorithm },
}

Ring: Based on ring crate. ring is focused on the implementation, testing, and optimization of a core set of cryptographic operations exposed via an easy-to-use (and hard-to-misuse) API. ring exposes a Rust API and is written in a hybrid of Rust, C, and assembly language. Particular attention is being paid to making it easy to build and integrate ring into applications and higher-level frameworks, and to ensure that ring works optimally on small devices, and eventually microcontrollers, to support Internet of Things (IoT) applications. Most of the C and assembly language code in ring comes from BoringSSL, and BoringSSL is derived from OpenSSL. ring merges changes from BoringSSL regularly. Also, several changes that were developed for ring have been contributed to and integrated into BoringSSL.
RustCrypto: Based on RustCrypto collection of Authenticated Encryption with Associated Data (AEAD) algorithms written in pure Rust. AEADs are high-level symmetric encryption primitives which defend against a wide range of potential attacks (i.e. IND-CCA3).
Sodiumoxide: Based on sodiumoxide crate which aims to provide a type-safe and efficient Rust binding that's just as easy to use. NaCl (pronounced "salt") is a new easy-to-use high-speed software library for network communication, encryption, decryption, signatures, etc. NaCl's goal is to provide all of the core operations needed to build higher-level cryptographic tools. Of course, other libraries already exist for these core operations. NaCl advances the state of the art by improving security, by improving usability, and by improving speed. Sodium is a portable, cross-compilable, installable, packageable fork of NaCl (based on the latest released upstream version nacl-20110221), with a compatible API.
Orion: Based on orion crate. Written in pure Rust, it aims to provide easy and usable crypto while trying to minimize the use of unsafe code. You can read more about Orion in the wiki.

Algorithms

enum RingAlgorithm {
    ChaCha20Poly1305,
    Aes128Gcm,
    Aes256Gcm,
}

enum RustCryptoAlgorithm {
    ChaCha20Poly1305,
    XChaCha20Poly1305,
    Aes128Gcm,
    Aes256Gcm,
    Aes128GcmSiv,
    Aes256GcmSiv,
    Aes128Siv,
    Aes256Siv,
    Ascon128,
    Ascon128a,
    Ascon80pq,
    DeoxysI128,
    DeoxysI256,
    DeoxysII128,
    DeoxysII256,
    Aes128Eax,
    Aes256Eax,
}

enum SodiumoxideAlgorithm {
    ChaCha20Poly1305,
    ChaCha20Poly1305Ietf,
    XChaCha20Poly1305Ietf,
}

enum OrionAlgorithm {
    ChaCha20Poly1305,
    XChaCha20Poly1305,
}

Audited

Only for Aes128Gcm, Aes256Gcm and ChaCha20Poly1305 with Ring and RustCrypto providers underlying crates have been audited.

Aes128Gcm/Aes256Gcm: If you have hardware acceleration ( e.g. AES-NI), then AES-GCM provides better performance. If you do not have a hardware acceleration, AES-GCM is either slower than ChaCha20Poly1305, or it leaks your encryption keys in cache timing. With RustCrypto provider the underlying aes-gcm has received one security audit by NCC Group, with no significant findings. With Ring provider the underlying ring crate was also audited.
ChaCha20Poly1305: Is notable for being simple and fast when implemented in pure software. The underlying ChaCha20 stream cipher uses a simple combination of add, rotate, and XOR instructions (a.k.a. "ARX"), and the Poly1305 hash function is likewise extremely simple. With RustCrypto provider the underlying chacha20poly1305 has received one security audit by NCC Group, with no significant findings. With Ring provider the underlying ring crate was also audited. If you do not have a hardware acceleration, ChaCha20Poly1305 is faster than AES-GCM. While it hasn't received approval from certain standards bodies (i.e. NIST) the algorithm is widely used and deployed. Notably it's mandatory to implement in the Transport Layer Security (TLS) protocol. The underlying ChaCha20 cipher is also widely used as a cryptographically secure random number generator, including internal use by the Rust standard library.
XChaCha20Poly1305: A variant of ChaCha20Poly1305 with an extended 192-bit (24-byte) nonce.

Not audited

USE AT YOUR OWN RISK!

Aes128GcmSiv / Aes256GcmSiv: Provides nonce reuse misuse resistance. Suitable as a general purpose symmetric encryption cipher, AES-GCM-SIV also removes many of the "sharp edges" of AES-GCM, providing significantly better security bounds while simultaneously eliminating the most catastrophic risks of nonce reuse that exist in AES-GCM. Decryption performance is equivalent to AES-GCM. Encryption is marginally slower.
Aes128Siv / Aes256Siv: Cipher which also provides nonce reuse misuse resistance.
Ascon128 / Ascon128a / Ascon80pq: Designed to be lightweight and easy to implement, even with added countermeasures against side-channel attacks. Ascon has been selected as new standard for lightweight cryptography in the NIST Lightweight Cryptography competition (2019–2023). Ascon has also been selected as the primary choice for lightweight authenticated encryption in the final portfolio of the CAESAR competition ( 2014–2019).
Deoxys: Based on a 128-bit lightweight ad-hoc tweakable block cipher. It may be used in two modes to handle nonce-respecting users (Deoxys-I) or nonce-reusing user (Deoxys-II). Deoxys-II has been selected as first choice for the "in-depth security" portfolio of the CAESAR competition.
Aes128Eax / Aes256Eax: Designed with a two-pass scheme, one pass for achieving privacy and one for authenticity for each block. EAX mode was submitted on October 3, 2003, to the attention of NIST in order to replace CCM as standard AEAD mode of operation, since CCM mode lacks some desirable attributes of EAX and is more complex.
For Sodiumoxide provider ChaCha20Poly1305: The original ChaCha20-Poly1305 construction can safely encrypt a pratically unlimited number of messages with the same key, without any practical limit to the size of a message (up to ~ 2^64 bytes).
For Sodiumoxide provider ChaChaCha20Poly1305Ietf: The IETF variant of the ChaCha20-Poly1305 construction can safely encrypt a practically unlimited number of messages, but individual messages cannot exceed 64*(2^32)-64 bytes (approximatively 256 GB).

Examples

You can see more in examples directory and in bench.py which has some benchmarks. Here are few simple examples:

Encrypt and decrypt with a buffer in memory

seal_in_place()/open_in_place()

This is the most performant way to use it as it will not copy bytes to the buffer nor allocate new memory for plaintext and ciphertext.

from rencrypt import Cipher, CipherMeta, RingAlgorithm
import os
from zeroize import zeroize1, mlock, munlock
import numpy as np
import platform


def setup_memory_limit():
    if not platform.system() == "Windows":
        return

    import ctypes
    from ctypes import wintypes

    # Define the Windows API functions
    kernel32 = ctypes.WinDLL('kernel32', use_last_error=True)

    GetCurrentProcess = kernel32.GetCurrentProcess
    GetCurrentProcess.restype = wintypes.HANDLE

    SetProcessWorkingSetSize = kernel32.SetProcessWorkingSetSize
    SetProcessWorkingSetSize.restype = wintypes.BOOL
    SetProcessWorkingSetSize.argtypes = [wintypes.HANDLE, ctypes.c_size_t, ctypes.c_size_t]

    # Get the handle of the current process
    current_process = GetCurrentProcess()

    # Set the working set size
    min_size = 6 * 1024 * 1024  # Minimum working set size
    max_size = 10 * 1024 * 1024  # Maximum working set size

    result = SetProcessWorkingSetSize(current_process, min_size, max_size)

    if not result:
        error_code = ctypes.get_last_error()
        error_message = ctypes.FormatError(error_code)
        raise RuntimeError(f"SetProcessWorkingSetSize failed with error code {error_code}: {error_message}")


if __name__ == "__main__":
    try:
        setup_memory_limit()

        # You can use also other algorithms like cipher_meta = CipherMeta.Ring(RingAlgorithm.ChaCha20Poly1305)`.
        cipher_meta = CipherMeta.Ring(RingAlgorithm.Aes256Gcm)
        key_len = cipher_meta.key_len()
        key = bytearray(key_len)
        # for security reasons we lock the memory of the key so it won't be swapped to disk
        mlock(key)
        cipher_meta.generate_key(key)
        # The key is copied and the input key is zeroized for security reasons.
        # The copied key will also be zeroized when the object is dropped.
        cipher = Cipher(cipher_meta, key)
        # it was zeroized we can unlock it
        munlock(key)

        # we create a buffer based on plaintext block len of 4096
        # the actual buffer needs to be a bit larger as the ciphertext also includes the tag and nonce
        plaintext_len = 4096
        ciphertext_len = cipher_meta.ciphertext_len(plaintext_len)
        buf = np.array([0] * ciphertext_len, dtype=np.uint8)
        # for security reasons we lock the memory of the buffer so it won't be swapped to disk, because it contains plaintext after decryption
        mlock(buf)

        aad = b"AAD"

        # put some plaintext in the buffer, it would be ideal if you can directly collect the data into the buffer without allocating new memory
        # but for the sake of example we will allocate and copy the data
        plaintext = bytearray(os.urandom(plaintext_len))
        # for security reasons we lock the memory of the plaintext so it won't be swapped to disk
        mlock(plaintext)
        # cipher.copy_slice is slighlty faster than buf[:plaintext_len] = plaintext, especially for large plaintext, because it copies the data in parallel
        # cipher.copy_slice takes bytes as input, cipher.copy_slice1 takes bytearray
        cipher.copy_slice(plaintext, buf)
        # encrypt it, this will encrypt in-place the data in the buffer
        print("encrypting...")
        ciphertext_len = cipher.seal_in_place(buf, plaintext_len, 42, aad)
        cipertext = buf[:ciphertext_len]
        # you can do something with the ciphertext

        # decrypt it
        # if you need to copy ciphertext to buffer, we don't need to do it now as it's already in the buffer
        # cipher.copy_slice(ciphertext, buf[:len(ciphertext)])
        print("decrypting...")
        plaintext_len = cipher.open_in_place(buf, ciphertext_len, 42, aad)
        plaintext2 = buf[:plaintext_len]
        # for security reasons we lock the memory of the plaintext so it won't be swapped to disk
        mlock(plaintext2)
        assert plaintext == plaintext2

    finally:
        # best practice, you should always zeroize the plaintext and keys after you are done with it (key will be zeroized when the enc object is dropped)
        zeroize1(plaintext)
        zeroize1(buf)

        munlock(buf)
        munlock(plaintext)

        print("bye!")

You can use other ciphers like cipher_meta = CipherMeta.Ring(RingAlgorithm.ChaCha20Poly1305).

You can also provide your own nonce that you can generate based on your constraints.

from rencrypt import Cipher, CipherMeta, RingAlgorithm
import os
from zeroize import zeroize1, mlock, munlock
import numpy as np
import platform


def setup_memory_limit():
    if not platform.system() == "Windows":
        return

    import ctypes
    from ctypes import wintypes

    # Define the Windows API functions
    kernel32 = ctypes.WinDLL('kernel32', use_last_error=True)

    GetCurrentProcess = kernel32.GetCurrentProcess
    GetCurrentProcess.restype = wintypes.HANDLE

    SetProcessWorkingSetSize = kernel32.SetProcessWorkingSetSize
    SetProcessWorkingSetSize.restype = wintypes.BOOL
    SetProcessWorkingSetSize.argtypes = [wintypes.HANDLE, ctypes.c_size_t, ctypes.c_size_t]

    # Get the handle of the current process
    current_process = GetCurrentProcess()

    # Set the working set size
    min_size = 6 * 1024 * 1024  # Minimum working set size
    max_size = 10 * 1024 * 1024  # Maximum working set size

    result = SetProcessWorkingSetSize(current_process, min_size, max_size)

    if not result:
        error_code = ctypes.get_last_error()
        error_message = ctypes.FormatError(error_code)
        raise RuntimeError(f"SetProcessWorkingSetSize failed with error code {error_code}: {error_message}")


if __name__ == "__main__":
    try:
        setup_memory_limit()

        # You can use also other algorithms like cipher_meta = CipherMeta.Ring(RingAlgorithm.ChaCha20Poly1305)`.
        cipher_meta = CipherMeta.Ring(RingAlgorithm.Aes256Gcm)
        key_len = cipher_meta.key_len()
        key = bytearray(key_len)
        # for security reasons we lock the memory of the key so it won't be swapped to disk
        mlock(key)
        cipher_meta.generate_key(key)
        # The key is copied and the input key is zeroized for security reasons.
        # The copied key will also be zeroized when the object is dropped.
        cipher = Cipher(cipher_meta, key)
        # it was zeroized we can unlock it
        munlock(key)

        # we create a buffer based on plaintext block len of 4096
        # the actual buffer needs to be a bit larger as the ciphertext also includes the tag and nonce
        plaintext_len = 4096
        ciphertext_len = cipher_meta.ciphertext_len(plaintext_len)
        buf = np.array([0] * ciphertext_len, dtype=np.uint8)
        # for security reasons we lock the memory of the buffer so it won't be swapped to disk, because it contains plaintext after decryption
        mlock(buf)

        aad = b"AAD"
        # create our own nonce
        nonce = os.urandom(cipher_meta.nonce_len())

        # put some plaintext in the buffer, it would be ideal if you can directly collect the data into the buffer without allocating new memory
        # but for the sake of example we will allocate and copy the data
        plaintext = bytearray(os.urandom(plaintext_len))
        # for security reasons we lock the memory of the plaintext so it won't be swapped to disk
        mlock(plaintext)
        # cipher.copy_slice is slighlty faster than buf[:plaintext_len] = plaintext, especially for large plaintext, because it copies the data in parallel
        # cipher.copy_slice takes bytes as input, cipher.copy_slice1 takes bytearray
        cipher.copy_slice(plaintext, buf)
        # encrypt it, this will encrypt in-place the data in the buffer
        print("encrypting...")
        ciphertext_len = cipher.seal_in_place(buf, plaintext_len, 42, aad, nonce)
        cipertext = buf[:ciphertext_len]
        # you can do something with the ciphertext

        # decrypt it
        # if you need to copy ciphertext to buffer, we don't need to do it now as it's already in the buffer
        # cipher.copy_slice(ciphertext, buf[:len(ciphertext)])
        print("decrypting...")
        plaintext_len = cipher.open_in_place(buf, ciphertext_len, 42, aad, nonce)
        plaintext2 = buf[:plaintext_len]
        # for security reasons we lock the memory of the plaintext so it won't be swapped to disk
        mlock(plaintext2)
        assert plaintext == plaintext2

    finally:
        # best practice, you should always zeroize the plaintext and keys after you are done with it (key will be zeroized when the enc object is dropped)
        zeroize1(plaintext)
        zeroize1(buf)

        munlock(buf)
        munlock(plaintext)

        print("bye!")

Encrypt and decrypt a file

import errno
import io
import os
from pathlib import Path
import shutil
from rencrypt import Cipher, CipherMeta, RingAlgorithm
import hashlib
from zeroize import zeroize1, mlock, munlock
import numpy as np
import platform


def setup_memory_limit():
    if not platform.system() == "Windows":
        return

    import ctypes
    from ctypes import wintypes

    # Define the Windows API functions
    kernel32 = ctypes.WinDLL('kernel32', use_last_error=True)

    GetCurrentProcess = kernel32.GetCurrentProcess
    GetCurrentProcess.restype = wintypes.HANDLE

    SetProcessWorkingSetSize = kernel32.SetProcessWorkingSetSize
    SetProcessWorkingSetSize.restype = wintypes.BOOL
    SetProcessWorkingSetSize.argtypes = [wintypes.HANDLE, ctypes.c_size_t, ctypes.c_size_t]

    # Get the handle of the current process
    current_process = GetCurrentProcess()

    # Set the working set size
    min_size = 6 * 1024 * 1024  # Minimum working set size
    max_size = 10 * 1024 * 1024  # Maximum working set size

    result = SetProcessWorkingSetSize(current_process, min_size, max_size)

    if not result:
        error_code = ctypes.get_last_error()
        error_message = ctypes.FormatError(error_code)
        raise RuntimeError(f"SetProcessWorkingSetSize failed with error code {error_code}: {error_message}")


def read_file_in_chunks(file_path, buf):
    with open(file_path, "rb") as file:
        buffered_reader = io.BufferedReader(file, buffer_size=len(buf))
        while True:
            read = buffered_reader.readinto(buf)
            if read == 0:
                break
            yield read


def hash_file(file_path):
    hash_algo = hashlib.sha256()
    with open(file_path, "rb") as f:
        for chunk in iter(lambda: f.read(4096), b""):
            hash_algo.update(chunk)
    return hash_algo.hexdigest()


def compare_files_by_hash(file1, file2):
    return hash_file(file1) == hash_file(file2)


def silentremove(filename):
    try:
        os.remove(filename)
    except OSError as e:  # this would be "except OSError, e:" before Python 2.6
        if e.errno != errno.ENOENT:  # errno.ENOENT = no such file or directory
            raise  # re-raise exception if a different error occurred


def create_directory_in_home(dir_name):
    # Get the user's home directory
    home_dir = Path.home()

    # Create the full path for the new directory
    new_dir_path = home_dir / dir_name

    # Create the directory
    try:
        new_dir_path.mkdir(parents=True, exist_ok=True)
    except Exception as e:
        print(f"Error creating directory: {e}")

    return new_dir_path.absolute().__str__()


def create_file_with_size(file_path_str, size_in_bytes):
    with open(file_path_str, "wb") as f:
        for _ in range((size_in_bytes // 4096) + 1):
            f.write(os.urandom(min(4096, size_in_bytes)))
        f.flush()


def delete_dir(path):
    if os.path.exists(path):
        shutil.rmtree(path)
    else:
        print(f"Directory {path} does not exist.")


if __name__ == "__main__":
    try:
        setup_memory_limit()

        tmp_dir = create_directory_in_home("rencrypt_tmp")
        fin = tmp_dir + "/" + "fin"
        fout = tmp_dir + "/" + "fout.enc"
        create_file_with_size(fin, 1 * 1024 * 1024)

        chunk_len = 256 * 1024

        # You can use also other algorithms like cipher_meta = CipherMeta.Ring(RingAlgorithm.ChaCha20Poly1305)`.
        cipher_meta = CipherMeta.Ring(RingAlgorithm.Aes256Gcm)
        key_len = cipher_meta.key_len()
        key = bytearray(key_len)
        # for security reasons we lock the memory of the key so it won't be swapped to disk
        mlock(key)
        cipher_meta.generate_key(key)
        # The key is copied and the input key is zeroized for security reasons.
        # The copied key will also be zeroized when the object is dropped.
        cipher = Cipher(cipher_meta, key)
        # it was zeroized we can unlock it
        munlock(key)

        plaintext_len = chunk_len
        ciphertext_len = cipher_meta.ciphertext_len(plaintext_len)
        buf = np.array([0] * ciphertext_len, dtype=np.uint8)
        mlock(buf)

        # use some random per file in additional authenticated data to prevent blocks from being swapped between files
        aad = os.urandom(16)

        # encrypt
        print("encrypting...")
        with open(fout, "wb", buffering=plaintext_len) as file_out:
            i = 0
            for read in read_file_in_chunks(fin, buf[:plaintext_len]):
                ciphertext_len = cipher.seal_in_place(buf, read, i, aad)
                file_out.write(buf[:ciphertext_len])
                i += 1
            file_out.flush()

        # decrypt
        print("decrypting...")
        tmp = fout + ".dec"
        with open(tmp, "wb", buffering=plaintext_len) as file_out:
            i = 0
            for read in read_file_in_chunks(fout, buf):
                plaintext_len2 = cipher.open_in_place(buf, read, i, aad)
                file_out.write(buf[:plaintext_len2])
                i += 1
            file_out.flush()

        assert compare_files_by_hash(fin, tmp)

        delete_dir(tmp_dir)

    finally:
        # best practice, you should always zeroize the plaintext and keys after you are done with it (key will be zeroized when the enc object is dropped)
        # buf will containt the last block plaintext so we need to zeroize it
        zeroize1(buf)

        munlock(buf)

    print("bye!")

Encrypt and decrypt from some bytes into the buffer

encrypt_from()/decrypt_from()

This is a bit slower than handling data only via the buffer, especially for large plaintext, but there are situations when you can't directly collect the data to the buffer but have some data from somewhere else.

from rencrypt import Cipher, CipherMeta, RingAlgorithm
import os
from zeroize import zeroize1, mlock, munlock
import numpy as np
import platform


def setup_memory_limit():
    if not platform.system() == "Windows":
        return

    import ctypes
    from ctypes import wintypes

    # Define the Windows API functions
    kernel32 = ctypes.WinDLL('kernel32', use_last_error=True)

    GetCurrentProcess = kernel32.GetCurrentProcess
    GetCurrentProcess.restype = wintypes.HANDLE

    SetProcessWorkingSetSize = kernel32.SetProcessWorkingSetSize
    SetProcessWorkingSetSize.restype = wintypes.BOOL
    SetProcessWorkingSetSize.argtypes = [wintypes.HANDLE, ctypes.c_size_t, ctypes.c_size_t]

    # Get the handle of the current process
    current_process = GetCurrentProcess()

    # Set the working set size
    min_size = 6 * 1024 * 1024  # Minimum working set size
    max_size = 10 * 1024 * 1024  # Maximum working set size

    result = SetProcessWorkingSetSize(current_process, min_size, max_size)

    if not result:
        error_code = ctypes.get_last_error()
        error_message = ctypes.FormatError(error_code)
        raise RuntimeError(f"SetProcessWorkingSetSize failed with error code {error_code}: {error_message}")


if __name__ == "__main__":
    try:
        setup_memory_limit()

        # You can use also other algorithms like cipher_meta = CipherMeta.Ring(RingAlgorithm.ChaCha20Poly1305)`.
        cipher_meta = CipherMeta.Ring(RingAlgorithm.Aes256Gcm)
        key_len = cipher_meta.key_len()
        key = bytearray(key_len)
        # for security reasons we lock the memory of the key so it won't be swapped to disk
        mlock(key)
        cipher_meta.generate_key(key)
        # The key is copied and the input key is zeroized for security reasons.
        # The copied key will also be zeroized when the object is dropped.
        cipher = Cipher(cipher_meta, key)
        # it was zeroized we can unlock it
        munlock(key)

        # we create a buffer based on plaintext block len of 4096
        # the actual buffer needs to be a bit larger as the ciphertext also includes the tag and nonce
        plaintext_len = 4096
        ciphertext_len = cipher_meta.ciphertext_len(plaintext_len)
        buf = np.array([0] * ciphertext_len, dtype=np.uint8)
        # for security reasons we lock the memory of the buffer so it won't be swapped to disk, because it contains plaintext after decryption
        mlock(buf)

        aad = b"AAD"

        plaintext = bytearray(os.urandom(plaintext_len))
        # for security reasons we lock the memory of the plaintext so it won't be swapped to disk
        mlock(plaintext)

        # encrypt it, after this will have the ciphertext in the buffer
        print("encrypting...")
        ciphertext_len = cipher.seal_in_place_from(plaintext, buf, 42, aad)
        cipertext = bytes(buf[:ciphertext_len])

        # decrypt it
        print("decrypting...")
        plaintext_len = cipher.open_in_place_from(cipertext, buf, 42, aad)
        plaintext2 = buf[:plaintext_len]
        # for security reasons we lock the memory of the plaintext so it won't be swapped to disk
        mlock(plaintext2)
        assert plaintext == plaintext2

    finally:
        # best practice, you should always zeroize the plaintext and keys after you are done with it (key will be zeroized when the enc object is dropped)
        zeroize1(plaintext)
        zeroize1(buf)

        munlock(buf)
        munlock(plaintext)

        print("bye!")

Zeroing memory before forking child process

This mitigates the problems that appears on Copy-on-write fork. You need to zeroize the data before forking the child process.

import os
from zeroize import zeroize1, mlock, munlock

if __name__ == "__main__":
    try:
        # Maximum you can mlock is 4MB
        sensitive_data = bytearray(b"Sensitive Information")
        mlock(sensitive_data)

        print("Before zeroization:", sensitive_data)

        zeroize1(sensitive_data)
        print("After zeroization:", sensitive_data)

        # Forking after zeroization to ensure no sensitive data is copied
        pid = os.fork()
        if pid == 0:
            # This is the child process
            print("Child process memory after fork:", sensitive_data)
        else:
            # This is the parent process
            os.wait()  # Wait for the child process to exit

        print("all good, bye!")

    finally:
        # Unlock the memory
        print("unlocking memory")
        munlock(sensitive_data)

Build from source

Browser

Geting sources from GitHub

Skip this if you're starting it in browser.

git clone https://github.com/radumarias/rencrypt-python && cd Cipher-python

Compile and run

curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh

To configure your current shell, you need to source the corresponding env file under $HOME/.cargo. This is usually done by running one of the following (note the leading DOT):

. "$HOME/.cargo/env"

python -m venv .env
source .env/bin/activate
pip install -r requirements.txt
maturin develop --release
pytest
python examples/encrypt.py
python examples/encrypt_into.py
python examples/encrypt_from.py
python examples/encrypt_file.py
python benches/bench.py

More benchmarks

Different ways to use the lib

Encrypt

Decrypt

Block size and duration in seconds

MB	rencrypt encrypt	PyFLocker encrypt update_into	rencrypt encrypt_from	PyFLocker encrypt update	rencrypt decrypt	PyFLocker decrypt update_into	rencrypt decrypt_from	PyFLocker decrypt update
0.03125	0.00001	0.00091	0.00001	0.00009	0.00001	0.00004	0.00001	0.00005
0.0625	0.00001	0.00005	0.00002	0.00005	0.00001	0.00004	0.00002	0.00008
0.125	0.00002	0.00005	0.00003	0.00011	0.00003	0.00005	0.00003	0.00013
0.25	0.00004	0.00008	0.00007	0.00019	0.00005	0.00009	0.00007	0.00023
0.5	0.0001	0.00014	0.00015	0.00035	0.00011	0.00015	0.00014	0.00043
1	0.00021	0.00024	0.0008	0.00082	0.00021	0.00029	0.00044	0.00103
2	0.00043	0.00052	0.00082	0.00147	0.00044	0.00058	0.00089	0.00176
4	0.00089	0.00098	0.00174	0.00284	0.00089	0.00117	0.0013	0.0034
8	0.00184	0.0019	0.00263	0.00523	0.00192	0.00323	0.00283	0.00571
16	0.00353	0.00393	0.00476	0.0141	0.00367	0.00617	0.00509	0.01031
32	0.00678	0.00748	0.00904	0.0244	0.00749	0.01348	0.01014	0.02543
64	0.01361	0.01461	0.01595	0.05064	0.0146	0.02697	0.0192	0.05296
128	0.02923	0.03027	0.03343	0.10362	0.03134	0.0541	0.03558	0.1138
256	0.06348	0.06188	0.07303	0.20911	0.06136	0.10417	0.07572	0.20828
512	0.11782	0.13463	0.14283	0.41929	0.1209	0.21114	0.14434	0.41463
1024	0.25001	0.24953	0.28912	0.8237	0.25377	0.42581	0.29795	0.82588

Speed throughout

256KB seems to be the sweet spot for buffer size that offers the max MB/s speed for encryption, on benchmarks that seem to be the case. We performed 10.000 encryption operations for each size varying from 1KB to 16MB.

MB	MB/s
0.0009765625	1083
0.001953125	1580
0.00390625	2158
0.0078125	2873
0.015625	3348
0.03125	3731
0.0625	4053
0.125	4156
0.25	4247
0.5	4182
1.0	3490
2.0	3539
4.0	3684
8.0	3787
16.0	3924

For the future

Generating key from password (KDF)
Maybe add support for RSA and Elliptic-curve cryptography
Saving and loading keys from file

Considerations

This lib hasn't been audited, but it wraps ring crate (well known and audited library) and RustCrypto (AES-GCM and ChaCha20Poly1305 ciphers are audited), so in principle at least the primitives should offer a similar level of security.

Contribute

Feel free to fork it, change and use it in any way that you want. If you build something interesting and feel like sharing pull requests are always appreciated.

How to contribute

Please see CONTRIBUTING.md.

Name		Name	Last commit message	Last commit date
Latest commit History 434 Commits
.github		.github
benches		benches
examples		examples
resources/charts		resources/charts
src		src
tests		tests
.gitignore		.gitignore
.gitmodules		.gitmodules
.gitpod.yml		.gitpod.yml
CONTRIBUTING.md		CONTRIBUTING.md
Cargo.lock		Cargo.lock
Cargo.toml		Cargo.toml
LICENSE-Apache-2.0		LICENSE-Apache-2.0
LICENSE-MIT		LICENSE-MIT
README.md		README.md
_rust-toolchain.toml		_rust-toolchain.toml
pyproject.toml		pyproject.toml
requirements.txt		requirements.txt
test.bat		test.bat
test.sh		test.sh

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Licenses found

Repository files navigation

rencrypt

Benchmark

Buffer in memory

File

Hardware used in benchmarks

Usage

Security

Encryption providers and algorithms (ciphers)

Providers

Algorithms

Audited

Not audited

Examples

Encrypt and decrypt with a buffer in memory

Encrypt and decrypt a file

Encrypt and decrypt from some bytes into the buffer

Zeroing memory before forking child process

Build from source

Browser

Geting sources from GitHub

Compile and run

More benchmarks

Different ways to use the lib

Speed throughout

For the future

Considerations

Contribute

How to contribute

About

Licenses found

Releases 52

Sponsor this project

Packages

Contributors 2

Languages

License

Licenses found

radumarias/rencrypt-python

Folders and files

Latest commit

History

Repository files navigation

rencrypt

Benchmark

Buffer in memory

File

Hardware used in benchmarks

Usage

Security

Encryption providers and algorithms (ciphers)

Providers

Algorithms

Audited

Not audited

Examples

Encrypt and decrypt with a buffer in memory

Encrypt and decrypt a file

Encrypt and decrypt from some bytes into the buffer

Zeroing memory before forking child process

Build from source

Browser

Geting sources from GitHub

Compile and run

More benchmarks

Different ways to use the lib

Speed throughout

For the future

Considerations

Contribute

How to contribute

About

Topics

Resources

License

Licenses found

Stars

Watchers

Forks

Releases 52

Sponsor this project

Packages 0

Contributors 2

Languages

Packages