Enable HDMI CEC #2

TheNetStriker · 2019-03-30T11:55:01Z

Those changes enable the HDMI cec driver and the pin. Please merge this into the main kernel. I tested this and it works. (See this forum post)

Those changes enable the HDMI cec driver and the pin.

[ Upstream commit fba9eb7 ] Add a header with macros usable in assembler files to emit alternative code sequences. It works analog to the alternatives for inline assmeblies in C files, with the same restrictions and capabilities. The syntax is ALTERNATIVE "<default instructions sequence>", \ "<alternative instructions sequence>", \ "<features-bit>" and ALTERNATIVE_2 "<default instructions sequence>", \ "<alternative instructions sqeuence #1>", \ "<feature-bit #1>", "<alternative instructions sqeuence #2>", \ "<feature-bit #2>" Reviewed-by: Vasily Gorbik <gor@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 2c0aa08 ] Scenario: 1. Port down and do fail over 2. Ap do rds_bind syscall PID: 47039 TASK: ffff89887e2fe640 CPU: 47 COMMAND: "kworker/u:6" #0 [ffff898e35f159f0] machine_kexec at ffffffff8103abf9 #1 [ffff898e35f15a60] crash_kexec at ffffffff810b96e3 #2 [ffff898e35f15b30] oops_end at ffffffff8150f518 #3 [ffff898e35f15b60] no_context at ffffffff8104854c #4 [ffff898e35f15ba0] __bad_area_nosemaphore at ffffffff81048675 #5 [ffff898e35f15bf0] bad_area_nosemaphore at ffffffff810487d3 #6 [ffff898e35f15c00] do_page_fault at ffffffff815120b8 #7 [ffff898e35f15d10] page_fault at ffffffff8150ea95 [exception RIP: unknown or invalid address] RIP: 0000000000000000 RSP: ffff898e35f15dc8 RFLAGS: 00010282 RAX: 00000000fffffffe RBX: ffff889b77f6fc00 RCX:ffffffff81c99d88 RDX: 0000000000000000 RSI: ffff896019ee08e8 RDI:ffff889b77f6fc00 RBP: ffff898e35f15df0 R8: ffff896019ee08c8 R9:0000000000000000 R10: 0000000000000400 R11: 0000000000000000 R12:ffff896019ee08c0 R13: ffff889b77f6fe68 R14: ffffffff81c99d80 R15: ffffffffa022a1e0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffff898e35f15dc8] cma_ndev_work_handler at ffffffffa022a228 [rdma_cm] #9 [ffff898e35f15df8] process_one_work at ffffffff8108a7c6 #10 [ffff898e35f15e58] worker_thread at ffffffff8108bda0 #11 [ffff898e35f15ee8] kthread at ffffffff81090fe6 PID: 45659 TASK: ffff880d313d2500 CPU: 31 COMMAND: "oracle_45659_ap" #0 [ffff881024ccfc98] __schedule at ffffffff8150bac4 #1 [ffff881024ccfd40] schedule at ffffffff8150c2cf #2 [ffff881024ccfd50] __mutex_lock_slowpath at ffffffff8150cee7 #3 [ffff881024ccfdc0] mutex_lock at ffffffff8150cdeb #4 [ffff881024ccfde0] rdma_destroy_id at ffffffffa022a027 [rdma_cm] #5 [ffff881024ccfe10] rds_ib_laddr_check at ffffffffa0357857 [rds_rdma] #6 [ffff881024ccfe50] rds_trans_get_preferred at ffffffffa0324c2a [rds] #7 [ffff881024ccfe80] rds_bind at ffffffffa031d690 [rds] #8 [ffff881024ccfeb0] sys_bind at ffffffff8142a670 PID: 45659 PID: 47039 rds_ib_laddr_check /* create id_priv with a null event_handler */ rdma_create_id rdma_bind_addr cma_acquire_dev /* add id_priv to cma_dev->id_list */ cma_attach_to_dev cma_ndev_work_handler /* event_hanlder is null */ id_priv->id.event_handler Signed-off-by: Guanglei Li <guanglei.li@oracle.com> Signed-off-by: Honglei Wang <honglei.wang@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Yanjun Zhu <yanjun.zhu@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Acked-by: Doug Ledford <dledford@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b6dd4d8 ] The pr_debug() in gic-v3 gic_send_sgi() can trigger a circular locking warning: GICv3: CPU10: ICC_SGI1R_EL1 5000400 ====================================================== WARNING: possible circular locking dependency detected 4.15.0+ #1 Tainted: G W ------------------------------------------------------ dynamic_debug01/1873 is trying to acquire lock: ((console_sem).lock){-...}, at: [<0000000099c891ec>] down_trylock+0x20/0x4c but task is already holding lock: (&rq->lock){-.-.}, at: [<00000000842e1587>] __task_rq_lock+0x54/0xdc which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&rq->lock){-.-.}: __lock_acquire+0x3b4/0x6e0 lock_acquire+0xf4/0x2a8 _raw_spin_lock+0x4c/0x60 task_fork_fair+0x3c/0x148 sched_fork+0x10c/0x214 copy_process.isra.32.part.33+0x4e8/0x14f0 _do_fork+0xe8/0x78c kernel_thread+0x48/0x54 rest_init+0x34/0x2a4 start_kernel+0x45c/0x488 -> #1 (&p->pi_lock){-.-.}: __lock_acquire+0x3b4/0x6e0 lock_acquire+0xf4/0x2a8 _raw_spin_lock_irqsave+0x58/0x70 try_to_wake_up+0x48/0x600 wake_up_process+0x28/0x34 __up.isra.0+0x60/0x6c up+0x60/0x68 __up_console_sem+0x4c/0x7c console_unlock+0x328/0x634 vprintk_emit+0x25c/0x390 dev_vprintk_emit+0xc4/0x1fc dev_printk_emit+0x88/0xa8 __dev_printk+0x58/0x9c _dev_info+0x84/0xa8 usb_new_device+0x100/0x474 hub_port_connect+0x280/0x92c hub_event+0x740/0xa84 process_one_work+0x240/0x70c worker_thread+0x60/0x400 kthread+0x110/0x13c ret_from_fork+0x10/0x18 -> #0 ((console_sem).lock){-...}: validate_chain.isra.34+0x6e4/0xa20 __lock_acquire+0x3b4/0x6e0 lock_acquire+0xf4/0x2a8 _raw_spin_lock_irqsave+0x58/0x70 down_trylock+0x20/0x4c __down_trylock_console_sem+0x3c/0x9c console_trylock+0x20/0xb0 vprintk_emit+0x254/0x390 vprintk_default+0x58/0x90 vprintk_func+0xbc/0x164 printk+0x80/0xa0 __dynamic_pr_debug+0x84/0xac gic_raise_softirq+0x184/0x18c smp_cross_call+0xac/0x218 smp_send_reschedule+0x3c/0x48 resched_curr+0x60/0x9c check_preempt_curr+0x70/0xdc wake_up_new_task+0x310/0x470 _do_fork+0x188/0x78c SyS_clone+0x44/0x50 __sys_trace_return+0x0/0x4 other info that might help us debug this: Chain exists of: (console_sem).lock --> &p->pi_lock --> &rq->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&rq->lock); lock(&p->pi_lock); lock(&rq->lock); lock((console_sem).lock); *** DEADLOCK *** 2 locks held by dynamic_debug01/1873: #0: (&p->pi_lock){-.-.}, at: [<000000001366df53>] wake_up_new_task+0x40/0x470 #1: (&rq->lock){-.-.}, at: [<00000000842e1587>] __task_rq_lock+0x54/0xdc stack backtrace: CPU: 10 PID: 1873 Comm: dynamic_debug01 Tainted: G W 4.15.0+ #1 Hardware name: GIGABYTE R120-T34-00/MT30-GS2-00, BIOS T48 10/02/2017 Call trace: dump_backtrace+0x0/0x188 show_stack+0x24/0x2c dump_stack+0xa4/0xe0 print_circular_bug.isra.31+0x29c/0x2b8 check_prev_add.constprop.39+0x6c8/0x6dc validate_chain.isra.34+0x6e4/0xa20 __lock_acquire+0x3b4/0x6e0 lock_acquire+0xf4/0x2a8 _raw_spin_lock_irqsave+0x58/0x70 down_trylock+0x20/0x4c __down_trylock_console_sem+0x3c/0x9c console_trylock+0x20/0xb0 vprintk_emit+0x254/0x390 vprintk_default+0x58/0x90 vprintk_func+0xbc/0x164 printk+0x80/0xa0 __dynamic_pr_debug+0x84/0xac gic_raise_softirq+0x184/0x18c smp_cross_call+0xac/0x218 smp_send_reschedule+0x3c/0x48 resched_curr+0x60/0x9c check_preempt_curr+0x70/0xdc wake_up_new_task+0x310/0x470 _do_fork+0x188/0x78c SyS_clone+0x44/0x50 __sys_trace_return+0x0/0x4 GICv3: CPU0: ICC_SGI1R_EL1 12000 This could be fixed with printk_deferred() but that might lessen its usefulness for debugging. So change it to pr_devel to keep it out of production kernels. Developers working on gic-v3 can enable it as needed in their kernels. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 2bbea6e ] when mounting an ISO filesystem sometimes (very rarely) the system hangs because of a race condition between two tasks. PID: 6766 TASK: ffff88007b2a6dd0 CPU: 0 COMMAND: "mount" #0 [ffff880078447ae0] __schedule at ffffffff8168d605 #1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49 #2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995 #3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef #4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod] #5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50 #6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3 #7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs] #8 [ffff880078447da8] mount_bdev at ffffffff81202570 #9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs] #10 [ffff880078447e28] mount_fs at ffffffff81202d09 #11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f #12 [ffff880078447ea8] do_mount at ffffffff81220fee #13 [ffff880078447f28] sys_mount at ffffffff812218d6 #14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49 RIP: 00007fd9ea914e9a RSP: 00007ffd5d9bf648 RFLAGS: 00010246 RAX: 00000000000000a5 RBX: ffffffff81698c49 RCX: 0000000000000010 RDX: 00007fd9ec2bc210 RSI: 00007fd9ec2bc290 RDI: 00007fd9ec2bcf30 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000010 R10: 00000000c0ed0001 R11: 0000000000000206 R12: 00007fd9ec2bc040 R13: 00007fd9eb6b2380 R14: 00007fd9ec2bc210 R15: 00007fd9ec2bcf30 ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b This task was trying to mount the cdrom. It allocated and configured a super_block struct and owned the write-lock for the super_block->s_umount rwsem. While exclusively owning the s_umount lock, it called sr_block_ioctl and waited to acquire the global sr_mutex lock. PID: 6785 TASK: ffff880078720fb0 CPU: 0 COMMAND: "systemd-udevd" #0 [ffff880078417898] __schedule at ffffffff8168d605 #1 [ffff880078417900] schedule at ffffffff8168dc59 #2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605 #3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838 #4 [ffff8800784179d0] down_read at ffffffff8168cde0 #5 [ffff8800784179e8] get_super at ffffffff81201cc7 #6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de #7 [ffff880078417a40] flush_disk at ffffffff8123a94b #8 [ffff880078417a88] check_disk_change at ffffffff8123ab50 #9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom] #10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod] #11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86 #12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65 #13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b #14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7 #15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf #16 [ffff880078417d00] do_last at ffffffff8120d53d #17 [ffff880078417db0] path_openat at ffffffff8120e6b2 #18 [ffff880078417e48] do_filp_open at ffffffff8121082b #19 [ffff880078417f18] do_sys_open at ffffffff811fdd33 #20 [ffff880078417f70] sys_open at ffffffff811fde4e #21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49 RIP: 00007f29438b0c20 RSP: 00007ffc76624b78 RFLAGS: 00010246 RAX: 0000000000000002 RBX: ffffffff81698c49 RCX: 0000000000000000 RDX: 00007f2944a5fa70 RSI: 00000000000a0800 RDI: 00007f2944a5fa70 RBP: 00007f2944a5f540 R8: 0000000000000000 R9: 0000000000000020 R10: 00007f2943614c40 R11: 0000000000000246 R12: ffffffff811fde4e R13: ffff880078417f78 R14: 000000000000000c R15: 00007f2944a4b010 ORIG_RAX: 0000000000000002 CS: 0033 SS: 002b This task tried to open the cdrom device, the sr_block_open function acquired the global sr_mutex lock. The call to check_disk_change() then saw an event flag indicating a possible media change and tried to flush any cached data for the device. As part of the flush, it tried to acquire the super_block->s_umount lock associated with the cdrom device. This was the same super_block as created and locked by the previous task. The first task acquires the s_umount lock and then the sr_mutex_lock; the second task acquires the sr_mutex_lock and then the s_umount lock. This patch fixes the issue by moving check_disk_change() out of cdrom_open() and let the caller take care of it. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a3ca831 ] When booting up with "threadirqs" in command line, all irq handlers of the DMA controller pl330 will be threaded forcedly. These threads will race for the same list, pl330->req_done. Before the callback, the spinlock was released. And after it, the spinlock was taken. This opened an race window where another threaded irq handler could steal the spinlock and be permitted to delete entries of the list, pl330->req_done. If the later deleted an entry that was still referred to by the former, there would be a kernel panic when the former was scheduled and tried to get the next sibling of the deleted entry. The scenario could be depicted as below: Thread: T1 pl330->req_done Thread: T2 | | | | -A-B-C-D- | Locked | | | | Waiting Del A | | | -B-C-D- | Unlocked | | | | Locked Waiting | | | | Del B | | | | -C-D- Unlocked Waiting | | | Locked | get C via B \ - Kernel panic The kernel panic looked like as below: Unable to handle kernel paging request at virtual address dead000000000108 pgd = ffffff8008c9e000 [dead000000000108] *pgd=000000027fffe003, *pud=000000027fffe003, *pmd=0000000000000000 Internal error: Oops: 96000044 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 85 Comm: irq/59-66330000 Not tainted 4.8.24-WR9.0.0.12_standard #2 Hardware name: Broadcom NS2 SVK (DT) task: ffffffc1f5cc3c00 task.stack: ffffffc1f5ce0000 PC is at pl330_irq_handler+0x27c/0x390 LR is at pl330_irq_handler+0x2a8/0x390 pc : [<ffffff80084cb694>] lr : [<ffffff80084cb6c0>] pstate: 800001c5 sp : ffffffc1f5ce3d00 x29: ffffffc1f5ce3d00 x28: 0000000000000140 x27: ffffffc1f5c530b0 x26: dead000000000100 x25: dead000000000200 x24: 0000000000418958 x23: 0000000000000001 x22: ffffffc1f5ccd668 x21: ffffffc1f5ccd590 x20: ffffffc1f5ccd418 x19: dead000000000060 x18: 0000000000000001 x17: 0000000000000007 x16: 0000000000000001 x15: ffffffffffffffff x14: ffffffffffffffff x13: ffffffffffffffff x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000840 x9 : ffffffc1f5ce0000 x8 : ffffffc1f5cc3338 x7 : ffffff8008ce2020 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : dead000000000200 x2 : dead000000000100 x1 : 0000000000000140 x0 : ffffffc1f5ccd590 Process irq/59-66330000 (pid: 85, stack limit = 0xffffffc1f5ce0020) Stack: (0xffffffc1f5ce3d00 to 0xffffffc1f5ce4000) 3d00: ffffffc1f5ce3d80 ffffff80080f09d0 ffffffc1f5ca0c00 ffffffc1f6f7c600 3d20: ffffffc1f5ce0000 ffffffc1f6f7c600 ffffffc1f5ca0c00 ffffff80080f0998 3d40: ffffffc1f5ce0000 ffffff80080f0000 0000000000000000 0000000000000000 3d60: ffffff8008ce202c ffffff8008ce2020 ffffffc1f5ccd668 ffffffc1f5c530b0 3d80: ffffffc1f5ce3db0 ffffff80080f0d70 ffffffc1f5ca0c40 0000000000000001 3da0: ffffffc1f5ce0000 ffffff80080f0cfc ffffffc1f5ce3e20 ffffff80080bf4f8 3dc0: ffffffc1f5ca0c80 ffffff8008bf3798 ffffff8008955528 ffffffc1f5ca0c00 3de0: ffffff80080f0c30 0000000000000000 0000000000000000 0000000000000000 3e00: 0000000000000000 0000000000000000 0000000000000000 ffffff80080f0b68 3e20: 0000000000000000 ffffff8008083690 ffffff80080bf420 ffffffc1f5ca0c80 3e40: 0000000000000000 0000000000000000 0000000000000000 ffffff80080cb648 3e60: ffffff8008b1c780 0000000000000000 0000000000000000 ffffffc1f5ca0c00 3e80: ffffffc100000000 ffffff8000000000 ffffffc1f5ce3e90 ffffffc1f5ce3e90 3ea0: 0000000000000000 ffffff8000000000 ffffffc1f5ce3eb0 ffffffc1f5ce3eb0 3ec0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3ee0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f40: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f80: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3fa0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3fc0: 0000000000000000 0000000000000005 0000000000000000 0000000000000000 3fe0: 0000000000000000 0000000000000000 0000000275ce3ff0 0000000275ce3ff8 Call trace: Exception stack(0xffffffc1f5ce3b30 to 0xffffffc1f5ce3c60) 3b20: dead000000000060 0000008000000000 3b40: ffffffc1f5ce3d00 ffffff80084cb694 0000000000000008 0000000000000e88 3b60: ffffffc1f5ce3bb0 ffffff80080dac68 ffffffc1f5ce3b90 ffffff8008826fe4 3b80: 00000000000001c0 00000000000001c0 ffffffc1f5ce3bb0 ffffff800848dfcc 3ba0: 0000000000020000 ffffff8008b15ae4 ffffffc1f5ce3c00 ffffff800808f000 3bc0: 0000000000000010 ffffff80088377f0 ffffffc1f5ccd590 0000000000000140 3be0: dead000000000100 dead000000000200 0000000000000001 0000000000000000 3c00: 0000000000000000 ffffff8008ce2020 ffffffc1f5cc3338 ffffffc1f5ce0000 3c20: 0000000000000840 0000000000000001 0000000000000000 ffffffffffffffff 3c40: ffffffffffffffff ffffffffffffffff 0000000000000001 0000000000000007 [<ffffff80084cb694>] pl330_irq_handler+0x27c/0x390 [<ffffff80080f09d0>] irq_forced_thread_fn+0x38/0x88 [<ffffff80080f0d70>] irq_thread+0x140/0x200 [<ffffff80080bf4f8>] kthread+0xd8/0xf0 [<ffffff8008083690>] ret_from_fork+0x10/0x40 Code: f2a00838 f9405763 aa1c03e1 aa1503e0 (f9000443) ---[ end trace f50005726d31199c ]--- Kernel panic - not syncing: Fatal exception in interrupt SMP: stopping secondary CPUs SMP: failed to stop secondary CPUs 0-1 Kernel Offset: disabled Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception in interrupt To fix this, re-start with the list-head after dropping the lock then re-takeing it. Reviewed-by: Frank Mori Hess <fmh6jj@gmail.com> Tested-by: Frank Mori Hess <fmh6jj@gmail.com> Signed-off-by: Qi Hou <qi.hou@windriver.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

While testing the deadline scheduler + cgroup setup I hit this warning. [ 132.612935] ------------[ cut here ]------------ [ 132.612951] WARNING: CPU: 5 PID: 0 at kernel/softirq.c:150 __local_bh_enable_ip+0x6b/0x80 [ 132.612952] Modules linked in: (a ton of modules...) [ 132.612981] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.7.0-rc2 #2 [ 132.612981] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.2-20150714_191134- 04/01/2014 [ 132.612982] 0000000000000086 45c8bb5effdd088b ffff88013fd43da0 ffffffff813d229e [ 132.612984] 0000000000000000 0000000000000000 ffff88013fd43de0 ffffffff810a652b [ 132.612985] 00000096811387b5 0000000000000200 ffff8800bab29d80 ffff880034c54c00 [ 132.612986] Call Trace: [ 132.612987] <IRQ> [<ffffffff813d229e>] dump_stack+0x63/0x85 [ 132.612994] [<ffffffff810a652b>] __warn+0xcb/0xf0 [ 132.612997] [<ffffffff810e76a0>] ? push_dl_task.part.32+0x170/0x170 [ 132.612999] [<ffffffff810a665d>] warn_slowpath_null+0x1d/0x20 [ 132.613000] [<ffffffff810aba5b>] __local_bh_enable_ip+0x6b/0x80 [ 132.613008] [<ffffffff817d6c8a>] _raw_write_unlock_bh+0x1a/0x20 [ 132.613010] [<ffffffff817d6c9e>] _raw_spin_unlock_bh+0xe/0x10 [ 132.613015] [<ffffffff811388ac>] put_css_set+0x5c/0x60 [ 132.613016] [<ffffffff8113dc7f>] cgroup_free+0x7f/0xa0 [ 132.613017] [<ffffffff810a3912>] __put_task_struct+0x42/0x140 [ 132.613018] [<ffffffff810e776a>] dl_task_timer+0xca/0x250 [ 132.613027] [<ffffffff810e76a0>] ? push_dl_task.part.32+0x170/0x170 [ 132.613030] [<ffffffff8111371e>] __hrtimer_run_queues+0xee/0x270 [ 132.613031] [<ffffffff81113ec8>] hrtimer_interrupt+0xa8/0x190 [ 132.613034] [<ffffffff81051a58>] local_apic_timer_interrupt+0x38/0x60 [ 132.613035] [<ffffffff817d9b0d>] smp_apic_timer_interrupt+0x3d/0x50 [ 132.613037] [<ffffffff817d7c5c>] apic_timer_interrupt+0x8c/0xa0 [ 132.613038] <EOI> [<ffffffff81063466>] ? native_safe_halt+0x6/0x10 [ 132.613043] [<ffffffff81037a4e>] default_idle+0x1e/0xd0 [ 132.613044] [<ffffffff810381cf>] arch_cpu_idle+0xf/0x20 [ 132.613046] [<ffffffff810e8fda>] default_idle_call+0x2a/0x40 [ 132.613047] [<ffffffff810e92d7>] cpu_startup_entry+0x2e7/0x340 [ 132.613048] [<ffffffff81050235>] start_secondary+0x155/0x190 [ 132.613049] ---[ end trace f91934d162ce9977 ]--- The warn is the spin_(lock|unlock)_bh(&css_set_lock) in the interrupt context. Converting the spin_lock_bh to spin_lock_irq(save) to avoid this problem - and other problems of sharing a spinlock with an interrupt. Change-Id: I5b5d5c79c3f380ac35f58596fc2cebaf6348eb67 Cc: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Juri Lelli <juri.lelli@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: cgroups@vger.kernel.org Cc: stable@vger.kernel.org # 4.5+ Cc: linux-kernel@vger.kernel.org Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com> Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com> Acked-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>

This patch fixes the following warning: [ 2.226264] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ 2.226341] in_atomic(): 0, irqs_disabled(): 0, pid: 1, name: swapper/0 [ 2.226366] 4 locks held by swapper/0/1: [ 2.226385] #0: (&dev->mutex){......}, at: [<ffffff800851c664>] __device_attach+0x3c/0x134 [ 2.226515] #1: (cpu_hotplug.lock){......}, at: [<ffffff800809feb0>] get_online_cpus+0x38/0x9c [ 2.226594] #2: (subsys mutex#7){......}, at: [<ffffff800851b0e4>] subsys_interface_register+0x54/0xfc [ 2.226684] #3: (rcu_read_lock){......}, at: [<ffffff800845c764>] rockchip_adjust_power_scale+0x88/0x450 [ 2.226771] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.4.132 #600 [ 2.226790] Hardware name: Rockchip PX30 evb ddr3 board (DT) [ 2.226809] Call trace: [ 2.226840] [<ffffff800808a0d4>] dump_backtrace+0x0/0x1ec [ 2.226889] [<ffffff800808a2d4>] show_stack+0x14/0x1c [ 2.226918] [<ffffff80083c41b4>] dump_stack+0x94/0xbc [ 2.226946] [<ffffff80080cb708>] ___might_sleep+0x108/0x118 [ 2.226972] [<ffffff80080cb788>] __might_sleep+0x70/0x80 [ 2.227001] [<ffffff8008b6d1d0>] mutex_lock_nested+0x54/0x38c [ 2.227031] [<ffffff8008858714>] __of_clk_get_from_provider+0x44/0xec [ 2.227061] [<ffffff8008852814>] __of_clk_get_by_name+0xd4/0x14c [ 2.227112] [<ffffff80088528a4>] of_clk_get_by_name+0x18/0x28 [ 2.227140] [<ffffff800845c980>] rockchip_adjust_power_scale+0x2a4/0x450 [ 2.227171] [<ffffff800877f630>] cpufreq_init+0x154/0x394 [ 2.227199] [<ffffff8008776ac4>] cpufreq_online+0x1b0/0x68c [ 2.227225] [<ffffff8008777040>] cpufreq_add_dev+0x3c/0x94 [ 2.227253] [<ffffff800851b168>] subsys_interface_register+0xd8/0xfc [ 2.227281] [<ffffff80087772d8>] cpufreq_register_driver+0x10c/0x1a8 [ 2.227332] [<ffffff800877f93c>] dt_cpufreq_probe+0xcc/0xe8 [ 2.227360] [<ffffff800851e7b8>] platform_drv_probe+0x54/0xa8 [ 2.227385] [<ffffff800851c924>] driver_probe_device+0x194/0x278 [ 2.227411] [<ffffff800851cb40>] __device_attach_driver+0x60/0x9c [ 2.227439] [<ffffff800851ae14>] bus_for_each_drv+0x9c/0xbc [ 2.227464] [<ffffff800851c6f0>] __device_attach+0xc8/0x134 [ 2.227488] [<ffffff800851ccb8>] device_initial_probe+0x10/0x18 [ 2.227514] [<ffffff800851bcec>] bus_probe_device+0x2c/0x90 [ 2.227541] [<ffffff8008519e90>] device_add+0x44c/0x510 [ 2.227570] [<ffffff800851e4d4>] platform_device_add+0xa0/0x1e4 [ 2.227597] [<ffffff800851ef28>] platform_device_register_full+0xa4/0xe4 [ 2.227627] [<ffffff80090f8680>] rockchip_cpufreq_driver_init+0xd4/0x31c [ 2.227654] [<ffffff8008083468>] do_one_initcall+0x84/0x1a4 [ 2.227682] [<ffffff80090c0e98>] kernel_init_freeable+0x260/0x264 [ 2.227708] [<ffffff8008b6ab68>] kernel_init+0x10/0xf8 [ 2.227734] [<ffffff80080832a0>] ret_from_fork+0x10/0x30 Fixes: 197a2d3 ("soc: rockchip: opp_select: add missing rcu lock") Change-Id: Ib52b6f7bc77bb207a1c8c6880f7a5e916fa3d2ee Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>

commit df30781 upstream. For problem determination we need to see whether and why we were successful or not. This allows deduction of scsi_eh escalation. Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : SCSI Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : schrh_r SCSI host reset handler result Request ID : 0x0000000000000000 none (invalid) SCSI ID : 0xffffffff none (invalid) SCSI LUN : 0xffffffff none (invalid) SCSI LUN high : 0xffffffff none (invalid) SCSI result : 0x00002002 field re-used for midlayer value: SUCCESS or in other cases: 0x2009 == FAST_IO_FAIL SCSI retries : 0xff none (invalid) SCSI allowed : 0xff none (invalid) SCSI scribble : 0xffffffffffffffff none (invalid) SCSI opcode : ffffffff ffffffff ffffffff ffffffff none (invalid) FCP rsp inf cod: 0xff none (invalid) FCP rsp IU : 00000000 00000000 00000000 00000000 none (invalid) 00000000 00000000 v2.6.35 commit a1dbfdd ("[SCSI] zfcp: Pass return code from fc_block_scsi_eh to scsi eh") introduced the first return with something other than the previously hardcoded single SUCCESS return path. Signed-off-by: Steffen Maier <maier@linux.ibm.com> Fixes: a1dbfdd ("[SCSI] zfcp: Pass return code from fc_block_scsi_eh to scsi eh") Cc: <stable@vger.kernel.org> #2.6.38+ Reviewed-by: Jens Remus <jremus@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 81979ae upstream. We already have a SCSI trace for the end of abort and scsi_eh TMF. Due to zfcp_erp_wait() and fc_block_scsi_eh() time can pass between the start of our eh callback and an actual send/recv of an abort / TMF request. In order to see the temporal sequence including any abort / TMF send retries, add a trace before the above two blocking functions. This supports problem determination with scsi_eh and parallel zfcp ERP. No need to explicitly trace the beginning of our eh callback, since we typically can send an abort / TMF and see its HBA response (in the worst case, it's a pseudo response on dismiss all of adapter recovery, e.g. due to an FSF request timeout [fsrth_1] of the abort / TMF). If we cannot send, we now get a trace record for the first "abrt_wt" or "[lt]r_wait" which denotes almost the beginning of the callback. No need to explicitly trace the wakeup after the above two blocking functions because the next retry loop causes another trace in any case and that is sufficient. Example trace records formatted with zfcpdbf from s390-tools: Timestamp : ... Area : SCSI Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : abrt_wt abort, before zfcp_erp_wait() Request ID : 0x0000000000000000 none (invalid) SCSI ID : 0x<scsi_id> SCSI LUN : 0x<scsi_lun> SCSI LUN high : 0x<scsi_lun_high> SCSI result : 0x<scsi_result_of_cmd_to_be_aborted> SCSI retries : 0x<retries_of_cmd_to_be_aborted> SCSI allowed : 0x<allowed_retries_of_cmd_to_be_aborted> SCSI scribble : 0x<req_id_of_cmd_to_be_aborted> SCSI opcode : <CDB_of_cmd_to_be_aborted> FCP rsp inf cod: 0x.. none (invalid) FCP rsp IU : ... none (invalid) Timestamp : ... Area : SCSI Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : lr_wait LUN reset, before zfcp_erp_wait() Request ID : 0x0000000000000000 none (invalid) SCSI ID : 0x<scsi_id> SCSI LUN : 0x<scsi_lun> SCSI LUN high : 0x<scsi_lun_high> SCSI result : 0x... unrelated SCSI retries : 0x.. unrelated SCSI allowed : 0x.. unrelated SCSI scribble : 0x... unrelated SCSI opcode : ... unrelated FCP rsp inf cod: 0x.. none (invalid) FCP rsp IU : ... none (invalid) Signed-off-by: Steffen Maier <maier@linux.ibm.com> Fixes: 63caf36 ("[SCSI] zfcp: Improve reliability of SCSI eh handlers in zfcp") Fixes: af4de36 ("[SCSI] zfcp: Block scsi_eh thread for rport state BLOCKED") Cc: <stable@vger.kernel.org> #2.6.38+ Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…ailed commit 512857a upstream. If a SCSI device is deleted during scsi_eh host reset, we cannot get a reference to the SCSI device anymore since scsi_device_get returns !=0 by design. Assuming the recovery of adapter and port(s) was successful, zfcp_erp_strategy_followup_success() attempts to trigger a LUN reset for the half-gone SCSI device. Unfortunately, it causes the following confusing trace record which states that zfcp will do a LUN recovery as "ERP need" is ZFCP_ERP_ACTION_REOPEN_LUN == 1 and equals "ERP want". Old example trace record formatted with zfcpdbf from s390-tools: Tag: : ersfs_3 ERP, trigger, unit reopen, port reopen succeeded LUN : 0x<FCP_LUN> WWPN : 0x<WWPN> D_ID : 0x<N_Port-ID> Adapter status : 0x5400050b Port status : 0x54000001 LUN status : 0x40000000 ZFCP_STATUS_COMMON_RUNNING but not ZFCP_STATUS_COMMON_UNBLOCKED as it was closed on close part of adapter reopen ERP want : 0x01 ERP need : 0x01 misleading However, zfcp_erp_setup_act() returns NULL as it cannot get the reference. Hence, zfcp_erp_action_enqueue() takes an early goto out and _NO_ recovery actually happens. We always do want the recovery trigger trace record even if no erp_action could be enqueued as in this case. For other cases where we did not enqueue an erp_action, 'need' has always been zero to indicate this. In order to indicate above goto out, introduce an eyecatcher "flag" to mark the "ERP need" as 'not needed' but still keep the information which erp_action type, that zfcp_erp_required_act() had decided upon, is needed. 0xc_ is chosen to be visibly different from 0x0_ in "ERP want". New example trace record formatted with zfcpdbf from s390-tools: Tag: : ersfs_3 ERP, trigger, unit reopen, port reopen succeeded LUN : 0x<FCP_LUN> WWPN : 0x<WWPN> D_ID : 0x<N_Port-ID> Adapter status : 0x5400050b Port status : 0x54000001 LUN status : 0x40000000 ERP want : 0x01 ERP need : 0xc1 would need LUN ERP, but no action set up ^ Before v2.6.38 commit ae0904f ("[SCSI] zfcp: Redesign of the debug tracing for recovery actions.") we could detect this case because the "erp_action" field in the trace was NULL. The rework removed erp_action as argument and field from the trace. This patch here is for tracing. A fix to allow LUN recovery in the case at hand is a topic for a separate patch. See also commit fdbd1c5 ("[SCSI] zfcp: Allow running unit/LUN shutdown without acquiring reference") for a similar case and background info. Signed-off-by: Steffen Maier <maier@linux.ibm.com> Fixes: ae0904f ("[SCSI] zfcp: Redesign of the debug tracing for recovery actions.") Cc: <stable@vger.kernel.org> #2.6.38+ Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

… return commit 96d9270 upstream. get_device() and its internally used kobject_get() only return NULL if they get passed NULL as argument. zfcp_get_port_by_wwpn() loops over adapter->port_list so the iteration variable port is always non-NULL. Struct device is embedded in struct zfcp_port so &port->dev is always non-NULL. This is the argument to get_device(). However, if we get an fc_rport in terminate_rport_io() for which we cannot find a match within zfcp_get_port_by_wwpn(), the latter can return NULL. v2.6.30 commit 7093293 ("[SCSI] zfcp: Fix oops when port disappears") introduced an early return without adding a trace record for this case. Even if we don't need recovery in this case, for debugging we should still see that our callback was invoked originally by scsi_transport_fc. Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : REC Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : sctrpin SCSI terminate rport I/O, no zfcp port LUN : 0xffffffffffffffff none (invalid) WWPN : 0x<wwpn> WWPN D_ID : 0x<n_port_id> N_Port-ID Adapter status : 0x... Port status : 0xffffffff unknown (-1) LUN status : 0x00000000 none (invalid) Ready count : 0x... Running count : 0x... ERP want : 0x03 ZFCP_ERP_ACTION_REOPEN_PORT_FORCED ERP need : 0xc0 ZFCP_ERP_ACTION_NONE Signed-off-by: Steffen Maier <maier@linux.ibm.com> Fixes: 7093293 ("[SCSI] zfcp: Fix oops when port disappears") Cc: <stable@vger.kernel.org> #2.6.38+ Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…RP_FAILED commit d70aab5 upstream. For problem determination we always want to see when we were invoked on the terminate_rport_io callback whether we perform something or not. Temporal event sequence of interest with a long fast_io_fail_tmo of 27 sec: loose remote port t workqueue [s] zfcp_q_<dev> IRQ zfcperp<dev> === ================== =================== ============================ 0 recv RSCN q p.test_link_work block rport start fast_io_fail_tmo send ADISC ELS 4 recv ADISC fail block zfcp_port port forced reopen send open port 12 recv open port fail q p.gid_pn_work zfcp_erp_wakeup (zfcp_erp_wait would return) GID_PN fail Before this point, we got a SCSI trace with tag "sctrpi1" on fast_io_fail, e.g. with the typical 5 sec setting. port.status |= ERP_FAILED If fast_io_fail_tmo triggers after this point, we missed a SCSI trace. workqueue fc_dl_<host> ================== 27 fc_timeout_fail_rport_io fc_terminate_rport_io zfcp_scsi_terminate_rport_io zfcp_erp_port_forced_reopen _zfcp_erp_port_forced_reopen if (port.status & ERP_FAILED) return; Therefore, write a trace before above early return. Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : REC Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 ZFCP_DBF_REC_TRIG Tag : sctrpi1 SCSI terminate rport I/O LUN : 0xffffffffffffffff none (invalid) WWPN : 0x<wwpn> D_ID : 0x<n_port_id> Adapter status : 0x... Port status : 0x... LUN status : 0x00000000 none (invalid) Ready count : 0x... Running count : 0x... ERP want : 0x03 ZFCP_ERP_ACTION_REOPEN_PORT_FORCED ERP need : 0xe0 ZFCP_ERP_ACTION_FAILED Signed-off-by: Steffen Maier <maier@linux.ibm.com> Cc: <stable@vger.kernel.org> #2.6.38+ Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8c3d20a upstream. That other commit introduced an inconsistency because it would trace on ERP_FAILED for all callers of port forced reopen triggers (not just terminate_rport_io), but it would not trace on ERP_FAILED for all callers of other ERP triggers such as adapter, port regular, LUN. Therefore, generalize that other commit. zfcp_erp_action_enqueue() already had two early outs which re-used the one zfcp_dbf_rec_trig() call. All ERP trigger functions finally run through zfcp_erp_action_enqueue(). So move the special handling for ZFCP_STATUS_COMMON_ERP_FAILED into zfcp_erp_action_enqueue() and add another early out with new trace marker for pseudo ERP need in this case. This removes all early returns from all ERP trigger functions so we always end up at zfcp_dbf_rec_trig(). Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : REC Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 ZFCP_DBF_REC_TRIG Tag : ....... LUN : 0x... WWPN : 0x... D_ID : 0x... Adapter status : 0x... Port status : 0x... LUN status : 0x... Ready count : 0x... Running count : 0x... ERP want : 0x0. ZFCP_ERP_ACTION_REOPEN_... ERP need : 0xe0 ZFCP_ERP_ACTION_FAILED Signed-off-by: Steffen Maier <maier@linux.ibm.com> Cc: <stable@vger.kernel.org> #2.6.38+ Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6a76550 upstream. Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : REC Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 ZFCP_DBF_REC_TRIG Tag : ....... LUN : 0x... WWPN : 0x... D_ID : 0x... Adapter status : 0x... Port status : 0x... LUN status : 0x... Ready count : 0x... Running count : 0x... ERP want : 0x0. ZFCP_ERP_ACTION_REOPEN_... ERP need : 0xc0 ZFCP_ERP_ACTION_NONE Signed-off-by: Steffen Maier <maier@linux.ibm.com> Cc: <stable@vger.kernel.org> #2.6.38+ Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b63e132 upstream. The current MIPS implementation of arch_trigger_cpumask_backtrace() is broken because it attempts to use synchronous IPIs despite the fact that it may be run with interrupts disabled. This means that when arch_trigger_cpumask_backtrace() is invoked, for example by the RCU CPU stall watchdog, we may: - Deadlock due to use of synchronous IPIs with interrupts disabled, causing the CPU that's attempting to generate the backtrace output to hang itself. - Not succeed in generating the desired output from remote CPUs. - Produce warnings about this from smp_call_function_many(), for example: [42760.526910] INFO: rcu_sched detected stalls on CPUs/tasks: [42760.535755] 0-...!: (1 GPs behind) idle=ade/140000000000000/0 softirq=526944/526945 fqs=0 [42760.547874] 1-...!: (0 ticks this GP) idle=e4a/140000000000000/0 softirq=547885/547885 fqs=0 [42760.559869] (detected by 2, t=2162 jiffies, g=266689, c=266688, q=33) [42760.568927] ------------[ cut here ]------------ [42760.576146] WARNING: CPU: 2 PID: 1216 at kernel/smp.c:416 smp_call_function_many+0x88/0x20c [42760.587839] Modules linked in: [42760.593152] CPU: 2 PID: 1216 Comm: sh Not tainted 4.15.4-00373-gee058bb4d0c2 #2 [42760.603767] Stack : 8e09bd20 8e09bd20 8e09bd20 fffffff0 00000007 00000006 00000000 8e09bca8 [42760.616937] 95b2b379 95b2b379 807a0080 00000007 81944518 0000018a 00000032 00000000 [42760.630095] 00000000 0000003 80000000 00000000 806eca74 00000009 8017e2b8 000001a0 [42760.643169] 00000000 00000002 00000000 8e09baa4 00000008 808b8008 86d69080 8e09bca0 [42760.656282] 8e09ad50 805e20aa 00000000 00000000 00000000 8017e2b8 00000009 801070ca [42760.669424] ... [42760.673919] Call Trace: [42760.678672] [<27fde568>] show_stack+0x70/0xf0 [42760.685417] [<84751641>] dump_stack+0xaa/0xd0 [42760.692188] [<699d671c>] __warn+0x80/0x92 [42760.698549] [<68915d41>] warn_slowpath_null+0x28/0x36 [42760.705912] [<f7c76c1c>] smp_call_function_many+0x88/0x20c [42760.713696] [<6bbdfc2a>] arch_trigger_cpumask_backtrace+0x30/0x4a [42760.722216] [<f845bd33>] rcu_dump_cpu_stacks+0x6a/0x98 [42760.729580] [<796e7629>] rcu_check_callbacks+0x672/0x6ac [42760.737476] [<059b3b43>] update_process_times+0x18/0x34 [42760.744981] [<6eb94941>] tick_sched_handle.isra.5+0x26/0x38 [42760.752793] [<478d3d70>] tick_sched_timer+0x1c/0x50 [42760.759882] [<e56ea39f>] __hrtimer_run_queues+0xc6/0x226 [42760.767418] [<e88bbcae>] hrtimer_interrupt+0x88/0x19a [42760.775031] [<6765a19e>] gic_compare_interrupt+0x2e/0x3a [42760.782761] [<0558bf5f>] handle_percpu_devid_irq+0x78/0x168 [42760.790795] [<90c11ba2>] generic_handle_irq+0x1e/0x2c [42760.798117] [<1b6d462c>] gic_handle_local_int+0x38/0x86 [42760.805545] [<b2ada1c7>] gic_irq_dispatch+0xa/0x14 [42760.812534] [<90c11ba2>] generic_handle_irq+0x1e/0x2c [42760.820086] [<c7521934>] do_IRQ+0x16/0x20 [42760.826274] [<9aef3ce6>] plat_irq_dispatch+0x62/0x94 [42760.833458] [<6a94b53c>] except_vec_vi_end+0x70/0x78 [42760.840655] [<22284043>] smp_call_function_many+0x1ba/0x20c [42760.848501] [<54022b58>] smp_call_function+0x1e/0x2c [42760.855693] [<ab9fc705>] flush_tlb_mm+0x2a/0x98 [42760.862730] [<0844cdd0>] tlb_flush_mmu+0x1c/0x44 [42760.869628] [<cb259b74>] arch_tlb_finish_mmu+0x26/0x3e [42760.877021] [<1aeaaf74>] tlb_finish_mmu+0x18/0x66 [42760.883907] [<b3fce717>] exit_mmap+0x76/0xea [42760.890428] [<c4c8a2f6>] mmput+0x80/0x11a [42760.896632] [<a41a08f4>] do_exit+0x1f4/0x80c [42760.903158] [<ee01cef6>] do_group_exit+0x20/0x7e [42760.909990] [<13fa8d54>] __wake_up_parent+0x0/0x1e [42760.917045] [<46cf89d0>] smp_call_function_many+0x1a2/0x20c [42760.924893] [<8c21a93b>] syscall_common+0x14/0x1c [42760.931765] ---[ end trace 02aa09da9dc52a60 ]--- [42760.938342] ------------[ cut here ]------------ [42760.945311] WARNING: CPU: 2 PID: 1216 at kernel/smp.c:291 smp_call_function_single+0xee/0xf8 ... This patch switches MIPS' arch_trigger_cpumask_backtrace() to use async IPIs & smp_call_function_single_async() in order to resolve this problem. We ensure use of the pre-allocated call_single_data_t structures is serialized by maintaining a cpumask indicating that they're busy, and refusing to attempt to send an IPI when a CPU's bit is set in this mask. This should only happen if a CPU hasn't responded to a previous backtrace IPI - ie. if it's hung - and we print a warning to the console in this case. I've marked this for stable branches as far back as v4.9, to which it applies cleanly. Strictly speaking the faulty MIPS implementation can be traced further back to commit 856839b ("MIPS: Add arch_trigger_all_cpu_backtrace() function") in v3.19, but kernel versions v3.19 through v4.8 will require further work to backport due to the rework performed in commit 9a01c3e ("nmi_backtrace: add more trigger_*_cpu_backtrace() methods"). Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/19597/ Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.9+ Fixes: 856839b ("MIPS: Add arch_trigger_all_cpu_backtrace() function") Fixes: 9a01c3e ("nmi_backtrace: add more trigger_*_cpu_backtrace() methods") [ Huacai: backported to 4.4: Restruction since generic NMI solution is unavailable ] Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

@s

commit c604cb7 upstream. My recent fix for dns_resolver_preparse() printing very long strings was incomplete, as shown by syzbot which still managed to hit the WARN_ONCE() in set_precision() by adding a crafted "dns_resolver" key: precision 50001 too large WARNING: CPU: 7 PID: 864 at lib/vsprintf.c:2164 vsnprintf+0x48a/0x5a0 The bug this time isn't just a printing bug, but also a logical error when multiple options ("#"-separated strings) are given in the key payload. Specifically, when separating an option string into name and value, if there is no value then the name is incorrectly considered to end at the end of the key payload, rather than the end of the current option. This bypasses validation of the option length, and also means that specifying multiple options is broken -- which presumably has gone unnoticed as there is currently only one valid option anyway. A similar problem also applied to option values, as the kstrtoul() when parsing the "dnserror" option will read past the end of the current option and into the next option. Fix these bugs by correctly computing the length of the option name and by copying the option value, null-terminated, into a temporary buffer. Reproducer for the WARN_ONCE() that syzbot hit: perl -e 'print "#A#", "\0" x 50000' | keyctl padd dns_resolver desc @s Reproducer for "dnserror" option being parsed incorrectly (expected behavior is to fail when seeing the unknown option "foo", actual behavior was to read the dnserror value as "1#foo" and fail there): perl -e 'print "#dnserror=1#foo\0"' | keyctl padd dns_resolver desc @s Reported-by: syzbot <syzkaller@googlegroups.com> Fixes: 4a2d789 ("DNS: If the DNS server returns an error, allow that to be cached [ver #2]") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cf3591e upstream. Revert the commit bd293d0. The proper fix has been made available with commit d0a255e ("loop: set PF_MEMALLOC_NOIO for the worker thread"). Note that the fix offered by commit bd293d0 doesn't really prevent the deadlock from occuring - if we look at the stacktrace reported by Junxiao Bi, we see that it hangs in bit_wait_io and not on the mutex - i.e. it has already successfully taken the mutex. Changing the mutex from mutex_lock to mutex_trylock won't help with deadlocks that happen afterwards. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 radxa#1 [ffff8813dedfb990] schedule at ffffffff8173fa27 radxa#2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec radxa#3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 radxa#4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f radxa#5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 radxa#6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 radxa#7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] radxa#8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] radxa#9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] radxa#10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce radxa#11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 radxa#12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f radxa#13 [ffff8813dedfbec0] kthread at ffffffff810a8428 radxa#14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Fixes: bd293d0 ("dm bufio: fix deadlock with loop device") Depends-on: d0a255e ("loop: set PF_MEMALLOC_NOIO for the worker thread") Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 82d6489 upstream. While testing the deadline scheduler + cgroup setup I hit this warning. [ 132.612935] ------------[ cut here ]------------ [ 132.612951] WARNING: CPU: 5 PID: 0 at kernel/softirq.c:150 __local_bh_enable_ip+0x6b/0x80 [ 132.612952] Modules linked in: (a ton of modules...) [ 132.612981] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.7.0-rc2 radxa#2 [ 132.612981] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.2-20150714_191134- 04/01/2014 [ 132.612982] 0000000000000086 45c8bb5effdd088b ffff88013fd43da0 ffffffff813d229e [ 132.612984] 0000000000000000 0000000000000000 ffff88013fd43de0 ffffffff810a652b [ 132.612985] 00000096811387b5 0000000000000200 ffff8800bab29d80 ffff880034c54c00 [ 132.612986] Call Trace: [ 132.612987] <IRQ> [<ffffffff813d229e>] dump_stack+0x63/0x85 [ 132.612994] [<ffffffff810a652b>] __warn+0xcb/0xf0 [ 132.612997] [<ffffffff810e76a0>] ? push_dl_task.part.32+0x170/0x170 [ 132.612999] [<ffffffff810a665d>] warn_slowpath_null+0x1d/0x20 [ 132.613000] [<ffffffff810aba5b>] __local_bh_enable_ip+0x6b/0x80 [ 132.613008] [<ffffffff817d6c8a>] _raw_write_unlock_bh+0x1a/0x20 [ 132.613010] [<ffffffff817d6c9e>] _raw_spin_unlock_bh+0xe/0x10 [ 132.613015] [<ffffffff811388ac>] put_css_set+0x5c/0x60 [ 132.613016] [<ffffffff8113dc7f>] cgroup_free+0x7f/0xa0 [ 132.613017] [<ffffffff810a3912>] __put_task_struct+0x42/0x140 [ 132.613018] [<ffffffff810e776a>] dl_task_timer+0xca/0x250 [ 132.613027] [<ffffffff810e76a0>] ? push_dl_task.part.32+0x170/0x170 [ 132.613030] [<ffffffff8111371e>] __hrtimer_run_queues+0xee/0x270 [ 132.613031] [<ffffffff81113ec8>] hrtimer_interrupt+0xa8/0x190 [ 132.613034] [<ffffffff81051a58>] local_apic_timer_interrupt+0x38/0x60 [ 132.613035] [<ffffffff817d9b0d>] smp_apic_timer_interrupt+0x3d/0x50 [ 132.613037] [<ffffffff817d7c5c>] apic_timer_interrupt+0x8c/0xa0 [ 132.613038] <EOI> [<ffffffff81063466>] ? native_safe_halt+0x6/0x10 [ 132.613043] [<ffffffff81037a4e>] default_idle+0x1e/0xd0 [ 132.613044] [<ffffffff810381cf>] arch_cpu_idle+0xf/0x20 [ 132.613046] [<ffffffff810e8fda>] default_idle_call+0x2a/0x40 [ 132.613047] [<ffffffff810e92d7>] cpu_startup_entry+0x2e7/0x340 [ 132.613048] [<ffffffff81050235>] start_secondary+0x155/0x190 [ 132.613049] ---[ end trace f91934d162ce9977 ]--- The warn is the spin_(lock|unlock)_bh(&css_set_lock) in the interrupt context. Converting the spin_lock_bh to spin_lock_irq(save) to avoid this problem - and other problems of sharing a spinlock with an interrupt. Cc: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Juri Lelli <juri.lelli@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: cgroups@vger.kernel.org Cc: stable@vger.kernel.org # 4.5+ Cc: linux-kernel@vger.kernel.org Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com> Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com> Acked-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Zubin Mithra <zsm@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 86968ef ] Calling ceph_buffer_put() in __ceph_setxattr() may end up freeing the i_xattrs.prealloc_blob buffer while holding the i_ceph_lock. This can be fixed by postponing the call until later, when the lock is released. The following backtrace was triggered by fstests generic/117. BUG: sleeping function called from invalid context at mm/vmalloc.c:2283 in_atomic(): 1, irqs_disabled(): 0, pid: 650, name: fsstress 3 locks held by fsstress/650: #0: 00000000870a0fe8 (sb_writers#8){.+.+}, at: mnt_want_write+0x20/0x50 radxa#1: 00000000ba0c4c74 (&type->i_mutex_dir_key#6){++++}, at: vfs_setxattr+0x55/0xa0 radxa#2: 000000008dfbb3f2 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: __ceph_setxattr+0x297/0x810 CPU: 1 PID: 650 Comm: fsstress Not tainted 5.2.0+ radxa#437 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x67/0x90 ___might_sleep.cold+0x9f/0xb1 vfree+0x4b/0x60 ceph_buffer_release+0x1b/0x60 __ceph_setxattr+0x2b4/0x810 __vfs_setxattr+0x66/0x80 __vfs_setxattr_noperm+0x59/0xf0 vfs_setxattr+0x81/0xa0 setxattr+0x115/0x230 ? filename_lookup+0xc9/0x140 ? rcu_read_lock_sched_held+0x74/0x80 ? rcu_sync_lockdep_assert+0x2e/0x60 ? __sb_start_write+0x142/0x1a0 ? mnt_want_write+0x20/0x50 path_setxattr+0xba/0xd0 __x64_sys_lsetxattr+0x24/0x30 do_syscall_64+0x50/0x1c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7ff23514359a Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fe163e5 ] syzbot reported: BUG: KMSAN: uninit-value in capi_write+0x791/0xa90 drivers/isdn/capi/capi.c:700 CPU: 0 PID: 10025 Comm: syz-executor379 Not tainted 4.20.0-rc7+ radxa#2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313 capi_write+0x791/0xa90 drivers/isdn/capi/capi.c:700 do_loop_readv_writev fs/read_write.c:703 [inline] do_iter_write+0x83e/0xd80 fs/read_write.c:961 vfs_writev fs/read_write.c:1004 [inline] do_writev+0x397/0x840 fs/read_write.c:1039 __do_sys_writev fs/read_write.c:1112 [inline] __se_sys_writev+0x9b/0xb0 fs/read_write.c:1109 __x64_sys_writev+0x4a/0x70 fs/read_write.c:1109 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 [...] The problem is that capi_write() is reading past the end of the message. Fix it by checking the message's length in the needed places. Reported-and-tested-by: syzbot+0849c524d9c634f5ae66@syzkaller.appspotmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The mutex lock at rc_register_device() was added by commit 08aeb7c ("[media] rc: add locking to fix register/show race"). It is meant to avoid race issues when trying to open a sysfs file while the RC register didn't complete. Adding a lock there causes troubles, as detected by the Kernel lock debug instrumentation at the Kernel: ====================================================== [ INFO: possible circular locking dependency detected ] 4.5.0-rc3+ #46 Not tainted ------------------------------------------------------- systemd-udevd/2681 is trying to acquire lock: (s_active#171){++++.+}, at: [<ffffffff8171a115>] kernfs_remove_by_name_ns+0x45/0xa0 but task is already holding lock: (&dev->lock){+.+.+.}, at: [<ffffffffa0724def>] rc_register_device+0xb2f/0x1450 [rc_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&dev->lock){+.+.+.}: [<ffffffff8124817d>] lock_acquire+0x13d/0x320 [<ffffffff822de966>] mutex_lock_nested+0xb6/0x860 [<ffffffffa0721f2b>] show_protocols+0x3b/0x3f0 [rc_core] [<ffffffff81cdaba5>] dev_attr_show+0x45/0xc0 [<ffffffff8171f1b3>] sysfs_kf_seq_show+0x203/0x3c0 [<ffffffff8171a6a1>] kernfs_seq_show+0x121/0x1b0 [<ffffffff81617c71>] seq_read+0x2f1/0x1160 [<ffffffff8171c911>] kernfs_fop_read+0x321/0x460 [<ffffffff815abc20>] __vfs_read+0xe0/0x3d0 [<ffffffff815ae90e>] vfs_read+0xde/0x2d0 [<ffffffff815b1d01>] SyS_read+0x111/0x230 [<ffffffff822e8636>] entry_SYSCALL_64_fastpath+0x16/0x76 -> #0 (s_active#171){++++.+}: [<ffffffff81244f24>] __lock_acquire+0x4304/0x5990 [<ffffffff8124817d>] lock_acquire+0x13d/0x320 [<ffffffff81717d3a>] __kernfs_remove+0x58a/0x810 [<ffffffff8171a115>] kernfs_remove_by_name_ns+0x45/0xa0 [<ffffffff81721592>] remove_files.isra.0+0x72/0x190 [<ffffffff8172174b>] sysfs_remove_group+0x9b/0x150 [<ffffffff81721854>] sysfs_remove_groups+0x54/0xa0 [<ffffffff81cd97d0>] device_remove_attrs+0xb0/0x140 [<ffffffff81cdb27c>] device_del+0x38c/0x6b0 [<ffffffffa0724b8b>] rc_register_device+0x8cb/0x1450 [rc_core] [<ffffffffa1326a7b>] dvb_usb_remote_init+0x66b/0x14d0 [dvb_usb] [<ffffffffa1321c81>] dvb_usb_device_init+0xf21/0x1860 [dvb_usb] [<ffffffffa13517dc>] dib0700_probe+0x14c/0x410 [dvb_usb_dib0700] [<ffffffff81dbb1dd>] usb_probe_interface+0x45d/0x940 [<ffffffff81ce7e7a>] driver_probe_device+0x21a/0xc30 [<ffffffff81ce89b1>] __driver_attach+0x121/0x160 [<ffffffff81ce21bf>] bus_for_each_dev+0x11f/0x1a0 [<ffffffff81ce6cdd>] driver_attach+0x3d/0x50 [<ffffffff81ce5df9>] bus_add_driver+0x4c9/0x770 [<ffffffff81cea39c>] driver_register+0x18c/0x3b0 [<ffffffff81db6e98>] usb_register_driver+0x1f8/0x440 [<ffffffffa074001e>] dib0700_driver_init+0x1e/0x1000 [dvb_usb_dib0700] [<ffffffff810021b1>] do_one_initcall+0x141/0x300 [<ffffffff8144d8eb>] do_init_module+0x1d0/0x5ad [<ffffffff812f27b6>] load_module+0x6666/0x9ba0 [<ffffffff812f5fe8>] SyS_finit_module+0x108/0x130 [<ffffffff822e8636>] entry_SYSCALL_64_fastpath+0x16/0x76 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&dev->lock); lock(s_active#171); lock(&dev->lock); lock(s_active#171); *** DEADLOCK *** 3 locks held by systemd-udevd/2681: #0: (&dev->mutex){......}, at: [<ffffffff81ce8933>] __driver_attach+0xa3/0x160 #1: (&dev->mutex){......}, at: [<ffffffff81ce8941>] __driver_attach+0xb1/0x160 #2: (&dev->lock){+.+.+.}, at: [<ffffffffa0724def>] rc_register_device+0xb2f/0x1450 [rc_core] In this specific case, some error happened during device init, causing IR to be disabled. Let's fix it by adding a var that will tell when the device is initialized. Any calls before that will return a -EINVAL. That should prevent the race issues. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> (cherry picked from commit c73bbaa) Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> (cherry picked from commit aa598b0) Signed-off-by: Lin Jianhua <linjh@rock-chips.com>

The locking in lirc needs improvement, but for now just fix this potential deadlock. ====================================================== [ INFO: possible circular locking dependency detected ] 4.10.0-rc1+ #1 Not tainted ------------------------------------------------------- bash/2502 is trying to acquire lock: (ir_raw_handler_lock){+.+.+.}, at: [<ffffffffc06f6a5e>] ir_raw_encode_scancode+0x3e/0xb0 [rc_core] but task is already holding lock: (&dev->lock){+.+.+.}, at: [<ffffffffc06f511f>] store_filter+0x9f/0x240 [rc_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&dev->lock){+.+.+.}: [<ffffffffa110adad>] lock_acquire+0xfd/0x200 [<ffffffffa1921327>] mutex_lock_nested+0x77/0x6d0 [<ffffffffc06f436a>] rc_open+0x2a/0x80 [rc_core] [<ffffffffc07114ca>] lirc_dev_fop_open+0xda/0x1e0 [lirc_dev] [<ffffffffa12975e0>] chrdev_open+0xb0/0x210 [<ffffffffa128eb5a>] do_dentry_open+0x20a/0x2f0 [<ffffffffa128ffcc>] vfs_open+0x4c/0x80 [<ffffffffa12a35ec>] path_openat+0x5bc/0xc00 [<ffffffffa12a5271>] do_filp_open+0x91/0x100 [<ffffffffa12903f0>] do_sys_open+0x130/0x220 [<ffffffffa12904fe>] SyS_open+0x1e/0x20 [<ffffffffa19278c1>] entry_SYSCALL_64_fastpath+0x1f/0xc2 -> #1 (lirc_dev_lock){+.+.+.}: [<ffffffffa110adad>] lock_acquire+0xfd/0x200 [<ffffffffa1921327>] mutex_lock_nested+0x77/0x6d0 [<ffffffffc0711f47>] lirc_register_driver+0x67/0x59b [lirc_dev] [<ffffffffc06db7f4>] ir_lirc_register+0x1f4/0x260 [ir_lirc_codec] [<ffffffffc06f6cac>] ir_raw_handler_register+0x7c/0xb0 [rc_core] [<ffffffffc0398010>] 0xffffffffc0398010 [<ffffffffa1002192>] do_one_initcall+0x52/0x1b0 [<ffffffffa11ef5c8>] do_init_module+0x5f/0x1fa [<ffffffffa11566b5>] load_module+0x2675/0x2b00 [<ffffffffa1156dcf>] SYSC_finit_module+0xdf/0x110 [<ffffffffa1156e1e>] SyS_finit_module+0xe/0x10 [<ffffffffa1003f5c>] do_syscall_64+0x6c/0x1f0 [<ffffffffa1927989>] return_from_SYSCALL_64+0x0/0x7a -> #0 (ir_raw_handler_lock){+.+.+.}: [<ffffffffa110a7b7>] __lock_acquire+0x10f7/0x1290 [<ffffffffa110adad>] lock_acquire+0xfd/0x200 [<ffffffffa1921327>] mutex_lock_nested+0x77/0x6d0 [<ffffffffc06f6a5e>] ir_raw_encode_scancode+0x3e/0xb0 [rc_core] [<ffffffffc0b0f492>] loop_set_wakeup_filter+0x62/0xbd [rc_loopback] [<ffffffffc06f522a>] store_filter+0x1aa/0x240 [rc_core] [<ffffffffa15e46f8>] dev_attr_store+0x18/0x30 [<ffffffffa13318e5>] sysfs_kf_write+0x45/0x60 [<ffffffffa1330b55>] kernfs_fop_write+0x155/0x1e0 [<ffffffffa1290797>] __vfs_write+0x37/0x160 [<ffffffffa12921f8>] vfs_write+0xc8/0x1e0 [<ffffffffa12936e8>] SyS_write+0x58/0xc0 [<ffffffffa19278c1>] entry_SYSCALL_64_fastpath+0x1f/0xc2 other info that might help us debug this: Chain exists of: ir_raw_handler_lock --> lirc_dev_lock --> &dev->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&dev->lock); lock(lirc_dev_lock); lock(&dev->lock); lock(ir_raw_handler_lock); *** DEADLOCK *** 4 locks held by bash/2502: #0: (sb_writers#4){.+.+.+}, at: [<ffffffffa12922c5>] vfs_write+0x195/0x1e0 #1: (&of->mutex){+.+.+.}, at: [<ffffffffa1330b1f>] kernfs_fop_write+0x11f/0x1e0 #2: (s_active#215){.+.+.+}, at: [<ffffffffa1330b28>] kernfs_fop_write+0x128/0x1e0 #3: (&dev->lock){+.+.+.}, at: [<ffffffffc06f511f>] store_filter+0x9f/0x240 [rc_core] stack backtrace: CPU: 3 PID: 2502 Comm: bash Not tainted 4.10.0-rc1+ #1 Hardware name: /DG45ID, BIOS IDG4510H.86A.0135.2011.0225.1100 02/25/2011 Call Trace: dump_stack+0x86/0xc3 print_circular_bug+0x1be/0x210 __lock_acquire+0x10f7/0x1290 lock_acquire+0xfd/0x200 ? ir_raw_encode_scancode+0x3e/0xb0 [rc_core] ? ir_raw_encode_scancode+0x3e/0xb0 [rc_core] mutex_lock_nested+0x77/0x6d0 ? ir_raw_encode_scancode+0x3e/0xb0 [rc_core] ? loop_set_wakeup_filter+0x44/0xbd [rc_loopback] ir_raw_encode_scancode+0x3e/0xb0 [rc_core] loop_set_wakeup_filter+0x62/0xbd [rc_loopback] ? loop_set_tx_duty_cycle+0x70/0x70 [rc_loopback] store_filter+0x1aa/0x240 [rc_core] dev_attr_store+0x18/0x30 sysfs_kf_write+0x45/0x60 kernfs_fop_write+0x155/0x1e0 __vfs_write+0x37/0x160 ? rcu_read_lock_sched_held+0x4a/0x80 ? rcu_sync_lockdep_assert+0x2f/0x60 ? __sb_start_write+0x10c/0x220 ? vfs_write+0x195/0x1e0 ? security_file_permission+0x3b/0xc0 vfs_write+0xc8/0x1e0 SyS_write+0x58/0xc0 entry_SYSCALL_64_fastpath+0x1f/0xc2 Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> (cherry picked from commit db5b15b) Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> (cherry picked from commit ae7d753) Signed-off-by: Lin Jianhua <linjh@rock-chips.com>

[ Upstream commit 47b1682 ] If xace hardware reports a bad version number, the error handling code in ace_setup() calls put_disk(), followed by queue cleanup. However, since the disk data structure has the queue pointer set, put_disk() also cleans and releases the queue. This results in blk_cleanup_queue() accessing an already released data structure, which in turn may result in a crash such as the following. [ 10.681671] BUG: Kernel NULL pointer dereference at 0x00000040 [ 10.681826] Faulting instruction address: 0xc0431480 [ 10.682072] Oops: Kernel access of bad area, sig: 11 [#1] [ 10.682251] BE PAGE_SIZE=4K PREEMPT Xilinx Virtex440 [ 10.682387] Modules linked in: [ 10.682528] CPU: 0 PID: 1 Comm: swapper Tainted: G W 5.0.0-rc6-next-20190218+ #2 [ 10.682733] NIP: c0431480 LR: c043147c CTR: c0422ad8 [ 10.682863] REGS: cf82fbe0 TRAP: 0300 Tainted: G W (5.0.0-rc6-next-20190218+) [ 10.683065] MSR: 00029000 <CE,EE,ME> CR: 2200022 XER: 00000000 [ 10.683236] DEAR: 00000040 ESR: 00000000 [ 10.683236] GPR00: c043147c cf82fc90 cf82ccc0 00000000 00000000 00000000 00000002 00000000 [ 10.683236] GPR08: 00000000 00000000 c04310bc 00000000 2200022 00000000 c0002c54 00000000 [ 10.683236] GPR16: 00000000 00000001 c09aa39c c09021b0 c09021dc 00000007 c0a68c08 00000000 [ 10.683236] GPR24: 00000001 ced6d400 ced6dcf0 c0815d9c 00000000 00000000 00000000 cedf0800 [ 10.684331] NIP [c0431480] blk_mq_run_hw_queue+0x28/0x114 [ 10.684473] LR [c043147c] blk_mq_run_hw_queue+0x24/0x114 [ 10.684602] Call Trace: [ 10.684671] [cf82fc90] [c043147c] blk_mq_run_hw_queue+0x24/0x114 (unreliable) [ 10.684854] [cf82fcc0] [c04315bc] blk_mq_run_hw_queues+0x50/0x7c [ 10.685002] [cf82fce0] [c0422b24] blk_set_queue_dying+0x30/0x68 [ 10.685154] [cf82fcf0] [c0423ec0] blk_cleanup_queue+0x34/0x14c [ 10.685306] [cf82fd10] [c054d73c] ace_probe+0x3dc/0x508 [ 10.685445] [cf82fd50] [c052d740] platform_drv_probe+0x4c/0xb8 [ 10.685592] [cf82fd70] [c052abb0] really_probe+0x20c/0x32c [ 10.685728] [cf82fda0] [c052ae58] driver_probe_device+0x68/0x464 [ 10.685877] [cf82fdc0] [c052b500] device_driver_attach+0xb4/0xe4 [ 10.686024] [cf82fde0] [c052b5dc] __driver_attach+0xac/0xfc [ 10.686161] [cf82fe00] [c0528428] bus_for_each_dev+0x80/0xc0 [ 10.686314] [cf82fe30] [c0529b3c] bus_add_driver+0x144/0x234 [ 10.686457] [cf82fe50] [c052c46c] driver_register+0x88/0x15c [ 10.686610] [cf82fe60] [c09de288] ace_init+0x4c/0xac [ 10.686742] [cf82fe80] [c0002730] do_one_initcall+0xac/0x330 [ 10.686888] [cf82fee0] [c09aafd0] kernel_init_freeable+0x34c/0x478 [ 10.687043] [cf82ff30] [c0002c6c] kernel_init+0x18/0x114 [ 10.687188] [cf82ff40] [c000f2f0] ret_from_kernel_thread+0x14/0x1c [ 10.687349] Instruction dump: [ 10.687435] 3863ffd4 4bfffd70 9421ffd0 7c0802a6 93c10028 7c9e2378 93e1002c 38810008 [ 10.687637] 7c7f1b78 90010034 4bfffc25 813f008c <81290040> 75290100 4182002c 80810008 [ 10.688056] ---[ end trace 13c9ff51d41b9d40 ]--- Fix the problem by setting the disk queue pointer to NULL before calling put_disk(). A more comprehensive fix might be to rearrange the code to check the hardware version before initializing data structures, but I don't know if this would have undesirable side effects, and it would increase the complexity of backporting the fix to older kernels. Fixes: 74489a9 ("Add support for Xilinx SystemACE CompactFlash interface") Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit e091eab upstream. In some cases, ocfs2_iget() reads the data of inode, which has been deleted for some reason. That will make the system panic. So We should judge whether this inode has been deleted, and tell the caller that the inode is a bad inode. For example, the ocfs2 is used as the backed of nfs, and the client is nfsv3. This issue can be reproduced by the following steps. on the nfs server side, ..../patha/pathb Step 1: The process A was scheduled before calling the function fh_verify. Step 2: The process B is removing the 'pathb', and just completed the call to function dput. Then the dentry of 'pathb' has been deleted from the dcache, and all ancestors have been deleted also. The relationship of dentry and inode was deleted through the function hlist_del_init. The following is the call stack. dentry_iput->hlist_del_init(&dentry->d_u.d_alias) At this time, the inode is still in the dcache. Step 3: The process A call the function ocfs2_get_dentry, which get the inode from dcache. Then the refcount of inode is 1. The following is the call stack. nfsd3_proc_getacl->fh_verify->exportfs_decode_fh->fh_to_dentry(ocfs2_get_dentry) Step 4: Dirty pages are flushed by bdi threads. So the inode of 'patha' is evicted, and this directory was deleted. But the inode of 'pathb' can't be evicted, because the refcount of the inode was 1. Step 5: The process A keep running, and call the function reconnect_path(in exportfs_decode_fh), which call function ocfs2_get_parent of ocfs2. Get the block number of parent directory(patha) by the name of ... Then read the data from disk by the block number. But this inode has been deleted, so the system panic. Process A Process B 1. in nfsd3_proc_getacl | 2. | dput 3. fh_to_dentry(ocfs2_get_dentry) | 4. bdi flush dirty cache | 5. ocfs2_iget | [283465.542049] OCFS2: ERROR (device sdp): ocfs2_validate_inode_block: Invalid dinode #580640: OCFS2_VALID_FL not set [283465.545490] Kernel panic - not syncing: OCFS2: (device sdp): panic forced after error [283465.546889] CPU: 5 PID: 12416 Comm: nfsd Tainted: G W 4.1.12-124.18.6.el6uek.bug28762940v3.x86_64 #2 [283465.548382] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 09/21/2015 [283465.549657] 0000000000000000 ffff8800a56fb7b8 ffffffff816e839c ffffffffa0514758 [283465.550392] 000000000008dc20 ffff8800a56fb838 ffffffff816e62d3 0000000000000008 [283465.551056] ffff880000000010 ffff8800a56fb848 ffff8800a56fb7e8 ffff88005df9f000 [283465.551710] Call Trace: [283465.552516] [<ffffffff816e839c>] dump_stack+0x63/0x81 [283465.553291] [<ffffffff816e62d3>] panic+0xcb/0x21b [283465.554037] [<ffffffffa04e66b0>] ocfs2_handle_error+0xf0/0xf0 [ocfs2] [283465.554882] [<ffffffffa04e7737>] __ocfs2_error+0x67/0x70 [ocfs2] [283465.555768] [<ffffffffa049c0f9>] ocfs2_validate_inode_block+0x229/0x230 [ocfs2] [283465.556683] [<ffffffffa047bcbc>] ocfs2_read_blocks+0x46c/0x7b0 [ocfs2] [283465.557408] [<ffffffffa049bed0>] ? ocfs2_inode_cache_io_unlock+0x20/0x20 [ocfs2] [283465.557973] [<ffffffffa049f0eb>] ocfs2_read_inode_block_full+0x3b/0x60 [ocfs2] [283465.558525] [<ffffffffa049f5ba>] ocfs2_iget+0x4aa/0x880 [ocfs2] [283465.559082] [<ffffffffa049146e>] ocfs2_get_parent+0x9e/0x220 [ocfs2] [283465.559622] [<ffffffff81297c05>] reconnect_path+0xb5/0x300 [283465.560156] [<ffffffff81297f46>] exportfs_decode_fh+0xf6/0x2b0 [283465.560708] [<ffffffffa062faf0>] ? nfsd_proc_getattr+0xa0/0xa0 [nfsd] [283465.561262] [<ffffffff810a8196>] ? prepare_creds+0x26/0x110 [283465.561932] [<ffffffffa0630860>] fh_verify+0x350/0x660 [nfsd] [283465.562862] [<ffffffffa0637804>] ? nfsd_cache_lookup+0x44/0x630 [nfsd] [283465.563697] [<ffffffffa063a8b9>] nfsd3_proc_getattr+0x69/0xf0 [nfsd] [283465.564510] [<ffffffffa062cf60>] nfsd_dispatch+0xe0/0x290 [nfsd] [283465.565358] [<ffffffffa05eb892>] ? svc_tcp_adjust_wspace+0x12/0x30 [sunrpc] [283465.566272] [<ffffffffa05ea652>] svc_process_common+0x412/0x6a0 [sunrpc] [283465.567155] [<ffffffffa05eaa03>] svc_process+0x123/0x210 [sunrpc] [283465.568020] [<ffffffffa062c90f>] nfsd+0xff/0x170 [nfsd] [283465.568962] [<ffffffffa062c810>] ? nfsd_destroy+0x80/0x80 [nfsd] [283465.570112] [<ffffffff810a622b>] kthread+0xcb/0xf0 [283465.571099] [<ffffffff810a6160>] ? kthread_create_on_node+0x180/0x180 [283465.572114] [<ffffffff816f11b8>] ret_from_fork+0x58/0x90 [283465.573156] [<ffffffff810a6160>] ? kthread_create_on_node+0x180/0x180 Link: http://lkml.kernel.org/r/1554185919-3010-1-git-send-email-sunny.s.zhang@oracle.com Signed-off-by: Shuning Zhang <sunny.s.zhang@oracle.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: piaojun <piaojun@huawei.com> Cc: "Gang He" <ghe@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a9fd095 ] Leaving dev_init_lock mutex locked in probe causes BUG and a WARNING when kernel is compiled with CONFIG_PROVE_LOCKING. Convert mutex to completion which silences those warnings and improves code readability. Fix below errors when connecting the USB WiFi dongle: brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43143 for chip BCM43143/2 BUG: workqueue leaked lock or atomic: kworker/0:2/0x00000000/434 last function: hub_event 1 lock held by kworker/0:2/434: #0: 18d5dcdf (&devinfo->dev_init_lock){+.+.}, at: brcmf_usb_probe+0x78/0x550 [brcmfmac] CPU: 0 PID: 434 Comm: kworker/0:2 Not tainted 4.19.23-00084-g454a789-dirty #123 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Workqueue: usb_hub_wq hub_event [<8011237c>] (unwind_backtrace) from [<8010d74c>] (show_stack+0x10/0x14) [<8010d74c>] (show_stack) from [<809c4324>] (dump_stack+0xa8/0xd4) [<809c4324>] (dump_stack) from [<8014195c>] (process_one_work+0x710/0x808) [<8014195c>] (process_one_work) from [<80141a80>] (worker_thread+0x2c/0x564) [<80141a80>] (worker_thread) from [<80147bcc>] (kthread+0x13c/0x16c) [<80147bcc>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20) Exception stack(0xed1d9fb0 to 0xed1d9ff8) 9fa0: 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ====================================================== WARNING: possible circular locking dependency detected 4.19.23-00084-g454a789-dirty #123 Not tainted ------------------------------------------------------ kworker/0:2/434 is trying to acquire lock: e29cf799 ((wq_completion)"events"){+.+.}, at: process_one_work+0x174/0x808 but task is already holding lock: 18d5dcdf (&devinfo->dev_init_lock){+.+.}, at: brcmf_usb_probe+0x78/0x550 [brcmfmac] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&devinfo->dev_init_lock){+.+.}: mutex_lock_nested+0x1c/0x24 brcmf_usb_probe+0x78/0x550 [brcmfmac] usb_probe_interface+0xc0/0x1bc really_probe+0x228/0x2c0 __driver_attach+0xe4/0xe8 bus_for_each_dev+0x68/0xb4 bus_add_driver+0x19c/0x214 driver_register+0x78/0x110 usb_register_driver+0x84/0x148 process_one_work+0x228/0x808 worker_thread+0x2c/0x564 kthread+0x13c/0x16c ret_from_fork+0x14/0x20 (null) -> #1 (brcmf_driver_work){+.+.}: worker_thread+0x2c/0x564 kthread+0x13c/0x16c ret_from_fork+0x14/0x20 (null) -> #0 ((wq_completion)"events"){+.+.}: process_one_work+0x1b8/0x808 worker_thread+0x2c/0x564 kthread+0x13c/0x16c ret_from_fork+0x14/0x20 (null) other info that might help us debug this: Chain exists of: (wq_completion)"events" --> brcmf_driver_work --> &devinfo->dev_init_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&devinfo->dev_init_lock); lock(brcmf_driver_work); lock(&devinfo->dev_init_lock); lock((wq_completion)"events"); *** DEADLOCK *** 1 lock held by kworker/0:2/434: #0: 18d5dcdf (&devinfo->dev_init_lock){+.+.}, at: brcmf_usb_probe+0x78/0x550 [brcmfmac] stack backtrace: CPU: 0 PID: 434 Comm: kworker/0:2 Not tainted 4.19.23-00084-g454a789-dirty #123 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Workqueue: events request_firmware_work_func [<8011237c>] (unwind_backtrace) from [<8010d74c>] (show_stack+0x10/0x14) [<8010d74c>] (show_stack) from [<809c4324>] (dump_stack+0xa8/0xd4) [<809c4324>] (dump_stack) from [<80172838>] (print_circular_bug+0x210/0x330) [<80172838>] (print_circular_bug) from [<80175940>] (__lock_acquire+0x160c/0x1a30) [<80175940>] (__lock_acquire) from [<8017671c>] (lock_acquire+0xe0/0x268) [<8017671c>] (lock_acquire) from [<80141404>] (process_one_work+0x1b8/0x808) [<80141404>] (process_one_work) from [<80141a80>] (worker_thread+0x2c/0x564) [<80141a80>] (worker_thread) from [<80147bcc>] (kthread+0x13c/0x16c) [<80147bcc>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20) Exception stack(0xed1d9fb0 to 0xed1d9ff8) 9fa0: 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Signed-off-by: Piotr Figiel <p.figiel@camlintechnologies.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

… sdevs) commit ef4021f upstream. When the user tries to remove a zfcp port via sysfs, we only rejected it if there are zfcp unit children under the port. With purely automatically scanned LUNs there are no zfcp units but only SCSI devices. In such cases, the port_remove erroneously continued. We close the port and this implicitly closes all LUNs under the port. The SCSI devices survive with their private zfcp_scsi_dev still holding a reference to the "removed" zfcp_port (still allocated but invisible in sysfs) [zfcp_get_port_by_wwpn in zfcp_scsi_slave_alloc]. This is not a problem as long as the fc_rport stays blocked. Once (auto) port scan brings back the removed port, we unblock its fc_rport again by design. However, there is no mechanism that would recover (open) the LUNs under the port (no "ersfs_3" without zfcp_unit [zfcp_erp_strategy_followup_success]). Any pending or new I/O to such LUN leads to repeated: Done: NEEDS_RETRY Result: hostbyte=DID_IMM_RETRY driverbyte=DRIVER_OK See also v4.10 commit 6f2ce1c ("scsi: zfcp: fix rport unblock race with LUN recovery"). Even a manual LUN recovery (echo 0 > /sys/bus/scsi/devices/H:C:T:L/zfcp_failed) does not help, as the LUN links to the old "removed" port which remains to lack ZFCP_STATUS_COMMON_RUNNING [zfcp_erp_required_act]. The only workaround is to first ensure that the fc_rport is blocked (e.g. port_remove again in case it was re-discovered by (auto) port scan), then delete the SCSI devices, and finally re-discover by (auto) port scan. The port scan includes an fc_rport unblock, which in turn triggers a new scan on the scsi target to freshly get new pure auto scan LUNs. Fix this by rejecting port_remove also if there are SCSI devices (even without any zfcp_unit) under this port. Re-use mechanics from v3.7 commit d99b601 ("[SCSI] zfcp: restore refcount check on port_remove"). However, we have to give up zfcp_sysfs_port_units_mutex earlier in unit_add to prevent a deadlock with scsi_host scan taking shost->scan_mutex first and then zfcp_sysfs_port_units_mutex now in our zfcp_scsi_slave_alloc(). Signed-off-by: Steffen Maier <maier@linux.ibm.com> Fixes: b62a8d9 ("[SCSI] zfcp: Use SCSI device data zfcp scsi dev instead of zfcp unit") Fixes: f8210e3 ("[SCSI] zfcp: Allow midlayer to scan for LUNs when running in NPIV mode") Cc: <stable@vger.kernel.org> #2.6.37+ Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 347ab94 ] This patch fixes deadlock warning if removing PWM device when CONFIG_PROVE_LOCKING is enabled. This issue can be reproceduced by the following steps on the R-Car H3 Salvator-X board if the backlight is disabled: # cd /sys/class/pwm/pwmchip0 # echo 0 > export # ls device export npwm power pwm0 subsystem uevent unexport # cd device/driver # ls bind e6e31000.pwm uevent unbind # echo e6e31000.pwm > unbind [ 87.659974] ====================================================== [ 87.666149] WARNING: possible circular locking dependency detected [ 87.672327] 5.0.0 #7 Not tainted [ 87.675549] ------------------------------------------------------ [ 87.681723] bash/2986 is trying to acquire lock: [ 87.686337] 000000005ea0e178 (kn->count#58){++++}, at: kernfs_remove_by_name_ns+0x50/0xa0 [ 87.694528] [ 87.694528] but task is already holding lock: [ 87.700353] 000000006313b17c (pwm_lock){+.+.}, at: pwmchip_remove+0x28/0x13c [ 87.707405] [ 87.707405] which lock already depends on the new lock. [ 87.707405] [ 87.715574] [ 87.715574] the existing dependency chain (in reverse order) is: [ 87.723048] [ 87.723048] -> #1 (pwm_lock){+.+.}: [ 87.728017] __mutex_lock+0x70/0x7e4 [ 87.732108] mutex_lock_nested+0x1c/0x24 [ 87.736547] pwm_request_from_chip.part.6+0x34/0x74 [ 87.741940] pwm_request_from_chip+0x20/0x40 [ 87.746725] export_store+0x6c/0x1f4 [ 87.750820] dev_attr_store+0x18/0x28 [ 87.754998] sysfs_kf_write+0x54/0x64 [ 87.759175] kernfs_fop_write+0xe4/0x1e8 [ 87.763615] __vfs_write+0x40/0x184 [ 87.767619] vfs_write+0xa8/0x19c [ 87.771448] ksys_write+0x58/0xbc [ 87.775278] __arm64_sys_write+0x18/0x20 [ 87.779721] el0_svc_common+0xd0/0x124 [ 87.783986] el0_svc_compat_handler+0x1c/0x24 [ 87.788858] el0_svc_compat+0x8/0x18 [ 87.792947] [ 87.792947] -> #0 (kn->count#58){++++}: [ 87.798260] lock_acquire+0xc4/0x22c [ 87.802353] __kernfs_remove+0x258/0x2c4 [ 87.806790] kernfs_remove_by_name_ns+0x50/0xa0 [ 87.811836] remove_files.isra.1+0x38/0x78 [ 87.816447] sysfs_remove_group+0x48/0x98 [ 87.820971] sysfs_remove_groups+0x34/0x4c [ 87.825583] device_remove_attrs+0x6c/0x7c [ 87.830197] device_del+0x11c/0x33c [ 87.834201] device_unregister+0x14/0x2c [ 87.838638] pwmchip_sysfs_unexport+0x40/0x4c [ 87.843509] pwmchip_remove+0xf4/0x13c [ 87.847773] rcar_pwm_remove+0x28/0x34 [ 87.852039] platform_drv_remove+0x24/0x64 [ 87.856651] device_release_driver_internal+0x18c/0x21c [ 87.862391] device_release_driver+0x14/0x1c [ 87.867175] unbind_store+0xe0/0x124 [ 87.871265] drv_attr_store+0x20/0x30 [ 87.875442] sysfs_kf_write+0x54/0x64 [ 87.879618] kernfs_fop_write+0xe4/0x1e8 [ 87.884055] __vfs_write+0x40/0x184 [ 87.888057] vfs_write+0xa8/0x19c [ 87.891887] ksys_write+0x58/0xbc [ 87.895716] __arm64_sys_write+0x18/0x20 [ 87.900154] el0_svc_common+0xd0/0x124 [ 87.904417] el0_svc_compat_handler+0x1c/0x24 [ 87.909289] el0_svc_compat+0x8/0x18 [ 87.913378] [ 87.913378] other info that might help us debug this: [ 87.913378] [ 87.921374] Possible unsafe locking scenario: [ 87.921374] [ 87.927286] CPU0 CPU1 [ 87.931808] ---- ---- [ 87.936331] lock(pwm_lock); [ 87.939293] lock(kn->count#58); [ 87.945120] lock(pwm_lock); [ 87.950599] lock(kn->count#58); [ 87.953908] [ 87.953908] *** DEADLOCK *** [ 87.953908] [ 87.959821] 4 locks held by bash/2986: [ 87.963563] #0: 00000000ace7bc30 (sb_writers#6){.+.+}, at: vfs_write+0x188/0x19c [ 87.971044] #1: 00000000287991b2 (&of->mutex){+.+.}, at: kernfs_fop_write+0xb4/0x1e8 [ 87.978872] #2: 00000000f739d016 (&dev->mutex){....}, at: device_release_driver_internal+0x40/0x21c [ 87.988001] #3: 000000006313b17c (pwm_lock){+.+.}, at: pwmchip_remove+0x28/0x13c [ 87.995481] [ 87.995481] stack backtrace: [ 87.999836] CPU: 0 PID: 2986 Comm: bash Not tainted 5.0.0 #7 [ 88.005489] Hardware name: Renesas Salvator-X board based on r8a7795 ES1.x (DT) [ 88.012791] Call trace: [ 88.015235] dump_backtrace+0x0/0x190 [ 88.018891] show_stack+0x14/0x1c [ 88.022204] dump_stack+0xb0/0xec [ 88.025514] print_circular_bug.isra.32+0x1d0/0x2e0 [ 88.030385] __lock_acquire+0x1318/0x1864 [ 88.034388] lock_acquire+0xc4/0x22c [ 88.037958] __kernfs_remove+0x258/0x2c4 [ 88.041874] kernfs_remove_by_name_ns+0x50/0xa0 [ 88.046398] remove_files.isra.1+0x38/0x78 [ 88.050487] sysfs_remove_group+0x48/0x98 [ 88.054490] sysfs_remove_groups+0x34/0x4c [ 88.058580] device_remove_attrs+0x6c/0x7c [ 88.062671] device_del+0x11c/0x33c [ 88.066154] device_unregister+0x14/0x2c [ 88.070070] pwmchip_sysfs_unexport+0x40/0x4c [ 88.074421] pwmchip_remove+0xf4/0x13c [ 88.078163] rcar_pwm_remove+0x28/0x34 [ 88.081906] platform_drv_remove+0x24/0x64 [ 88.085996] device_release_driver_internal+0x18c/0x21c [ 88.091215] device_release_driver+0x14/0x1c [ 88.095478] unbind_store+0xe0/0x124 [ 88.099048] drv_attr_store+0x20/0x30 [ 88.102704] sysfs_kf_write+0x54/0x64 [ 88.106359] kernfs_fop_write+0xe4/0x1e8 [ 88.110275] __vfs_write+0x40/0x184 [ 88.113757] vfs_write+0xa8/0x19c [ 88.117065] ksys_write+0x58/0xbc [ 88.120374] __arm64_sys_write+0x18/0x20 [ 88.124291] el0_svc_common+0xd0/0x124 [ 88.128034] el0_svc_compat_handler+0x1c/0x24 [ 88.132384] el0_svc_compat+0x8/0x18 The sysfs unexport in pwmchip_remove() is completely asymmetric to what we do in pwmchip_add_with_polarity() and commit 0733424 ("pwm: Unexport children before chip removal") is a strong indication that this was wrong to begin with. We should just move pwmchip_sysfs_unexport() where it belongs, which is right after pwmchip_sysfs_unexport_children(). In that case, we do not need separate functions anymore either. We also really want to remove sysfs irrespective of whether or not the chip will be removed as a result of pwmchip_remove(). We can only assume that the driver will be gone after that, so we shouldn't leave any dangling sysfs files around. This warning disappears if we move pwmchip_sysfs_unexport() to the top of pwmchip_remove(), pwmchip_sysfs_unexport_children(). That way it is also outside of the pwm_lock section, which indeed doesn't seem to be needed. Moving the pwmchip_sysfs_export() call outside of that section also seems fine and it'd be perfectly symmetric with pwmchip_remove() again. So, this patch fixes them. Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com> [shimoda: revise the commit log and code] Fixes: 76abbdd ("pwm: Add sysfs interface") Fixes: 0733424 ("pwm: Unexport children before chip removal") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Hoan Nguyen An <na-hoan@jinso.co.jp> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

Two paths to update quota and f2fs_lock_op: 1. - lock_op | - quota_update `- unlock_op 2. - quota_update - lock_op `- unlock_op But, we need to make a transaction on quota_update + lock_op in #2 case. So, this patch introduces: 1. lock_op 2. down_write 3. check __need_flush 4. up_write 5. if there is dirty quota entries, flush them 6. otherwise, good to go Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

[ Upstream commit 5518424 ] ifmsh->csa is an RCU-protected pointer. The writer context in ieee80211_mesh_finish_csa() is already mutually exclusive with wdev->sdata.mtx, but the RCU checker did not know this. Use rcu_dereference_protected() to avoid a warning. fixes the following warning: [ 12.519089] ============================= [ 12.520042] WARNING: suspicious RCU usage [ 12.520652] 5.1.0-rc7-wt+ #16 Tainted: G W [ 12.521409] ----------------------------- [ 12.521972] net/mac80211/mesh.c:1223 suspicious rcu_dereference_check() usage! [ 12.522928] other info that might help us debug this: [ 12.523984] rcu_scheduler_active = 2, debug_locks = 1 [ 12.524855] 5 locks held by kworker/u8:2/152: [ 12.525438] #0: 00000000057be08c ((wq_completion)phy0){+.+.}, at: process_one_work+0x1a2/0x620 [ 12.526607] #1: 0000000059c6b07a ((work_completion)(&sdata->csa_finalize_work)){+.+.}, at: process_one_work+0x1a2/0x620 [ 12.528001] #2: 00000000f184ba7d (&wdev->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x2f/0x90 [ 12.529116] #3: 00000000831a1f54 (&local->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x47/0x90 [ 12.530233] #4: 00000000fd06f988 (&local->chanctx_mtx){+.+.}, at: ieee80211_csa_finalize_work+0x51/0x90 Signed-off-by: Thomas Pedersen <thomas@eero.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6da9f77 ] When debugging options are turned on, the rcu_read_lock() function might not be inlined. This results in lockdep's print_lock() function printing "rcu_read_lock+0x0/0x70" instead of rcu_read_lock()'s caller. For example: [ 10.579995] ============================= [ 10.584033] WARNING: suspicious RCU usage [ 10.588074] 4.18.0.memcg_v2+ #1 Not tainted [ 10.593162] ----------------------------- [ 10.597203] include/linux/rcupdate.h:281 Illegal context switch in RCU read-side critical section! [ 10.606220] [ 10.606220] other info that might help us debug this: [ 10.606220] [ 10.614280] [ 10.614280] rcu_scheduler_active = 2, debug_locks = 1 [ 10.620853] 3 locks held by systemd/1: [ 10.624632] #0: (____ptrval____) (&type->i_mutex_dir_key#5){.+.+}, at: lookup_slow+0x42/0x70 [ 10.633232] #1: (____ptrval____) (rcu_read_lock){....}, at: rcu_read_lock+0x0/0x70 [ 10.640954] #2: (____ptrval____) (rcu_read_lock){....}, at: rcu_read_lock+0x0/0x70 These "rcu_read_lock+0x0/0x70" strings are not providing any useful information. This commit therefore forces inlining of the rcu_read_lock() function so that rcu_read_lock()'s caller is instead shown. Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 80e5302 ] An impending change to enable HAVE_C_RECORDMCOUNT on powerpc leads to warnings such as the following: # modprobe kprobe_example ftrace-powerpc: Not expected bl: opcode is 3c4c0001 WARNING: CPU: 0 PID: 227 at kernel/trace/ftrace.c:2001 ftrace_bug+0x90/0x318 Modules linked in: CPU: 0 PID: 227 Comm: modprobe Not tainted 5.2.0-rc6-00678-g1c329100b942 #2 NIP: c000000000264318 LR: c00000000025d694 CTR: c000000000f5cd30 REGS: c000000001f2b7b0 TRAP: 0700 Not tainted (5.2.0-rc6-00678-g1c329100b942) MSR: 900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 28228222 XER: 00000000 CFAR: c0000000002642fc IRQMASK: 0 <snip> NIP [c000000000264318] ftrace_bug+0x90/0x318 LR [c00000000025d694] ftrace_process_locs+0x4f4/0x5e0 Call Trace: [c000000001f2ba40] [0000000000000004] 0x4 (unreliable) [c000000001f2bad0] [c00000000025d694] ftrace_process_locs+0x4f4/0x5e0 [c000000001f2bb90] [c00000000020ff10] load_module+0x25b0/0x30c0 [c000000001f2bd00] [c000000000210cb0] sys_finit_module+0xc0/0x130 [c000000001f2be20] [c00000000000bda4] system_call+0x5c/0x70 Instruction dump: 419e0018 2f83ffff 419e00bc 2f83ffea 409e00cc 4800001c 0fe00000 3c62ff96 39000001 39400000 386386d0 480000c4 <0fe00000> 3ce20003 39000001 3c62ff96 ---[ end trace 4c438d5cebf78381 ]--- ftrace failed to modify [<c0080000012a0008>] 0xc0080000012a0008 actual: 01:00:4c:3c Initializing ftrace call sites ftrace record flags: 2000000 (0) expected tramp: c00000000006af4c Looking at the relocation records in __mcount_loc shows a few spurious entries: RELOCATION RECORDS FOR [__mcount_loc]: OFFSET TYPE VALUE 0000000000000000 R_PPC64_ADDR64 .text.unlikely+0x0000000000000008 0000000000000008 R_PPC64_ADDR64 .text.unlikely+0x0000000000000014 0000000000000010 R_PPC64_ADDR64 .text.unlikely+0x0000000000000060 0000000000000018 R_PPC64_ADDR64 .text.unlikely+0x00000000000000b4 0000000000000020 R_PPC64_ADDR64 .init.text+0x0000000000000008 0000000000000028 R_PPC64_ADDR64 .init.text+0x0000000000000014 The first entry in each section is incorrect. Looking at the relocation records, the spurious entries correspond to the R_PPC64_ENTRY records: RELOCATION RECORDS FOR [.text.unlikely]: OFFSET TYPE VALUE 0000000000000000 R_PPC64_REL64 .TOC.-0x0000000000000008 0000000000000008 R_PPC64_ENTRY *ABS* 0000000000000014 R_PPC64_REL24 _mcount <snip> The problem is that we are not validating the return value from get_mcountsym() in sift_rel_mcount(). With this entry, mcountsym is 0, but Elf_r_sym(relp) also ends up being 0. Fix this by ensuring mcountsym is valid before processing the entry. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>

…ers" This reverts commit 8bc82db. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 in_atomic(): 0, irqs_disabled(): 0, pid: 532, name: insmod 3 locks held by insmod/532: #0: (&dev->mutex){......}, at: [<ffffff8008346f7c>] __driver_attach+0x94/0x98 #1: (&dev->mutex){......}, at: [<ffffff8008346f24>] __driver_attach+0x3c/0x98 #2: (rcu_read_lock){......}, at: [<ffffff8008356714>] dev_pm_opp_register_notifier+0x0/0x98 CPU: 0 PID: 532 Comm: insmod Tainted: G O 4.4.189 #1190 Hardware name: Rockchip RK1808 EVB V10 Board (DT) Call trace: [<ffffff8008087664>] dump_backtrace+0x0/0x1cc [<ffffff8008087844>] show_stack+0x14/0x1c [<ffffff800824e990>] dump_stack+0x94/0xbc [<ffffff80080b7394>] ___might_sleep+0x108/0x118 [<ffffff80080b7414>] __might_sleep+0x70/0x80 [<ffffff8008693e78>] mutex_lock_nested+0x3c/0x358 [<ffffff80080b3cd0>] srcu_notifier_chain_register+0x50/0x6c [<ffffff80083567a8>] dev_pm_opp_register_notifier+0x94/0x98 [<ffffff80084c5264>] devm_devfreq_register_opp_notifier+0x48/0x88 [<ffffff80006aa18c>] gckDevfreq_Init+0x200/0x2b4 [galcore] [<ffffff80006a9780>] gpu_probe+0x4dc/0x5e8 [galcore] [<ffffff8008348764>] platform_drv_probe+0x54/0xa8 [<ffffff8008346e04>] driver_probe_device+0x18c/0x270 [<ffffff8008346f38>] __driver_attach+0x50/0x98 [<ffffff800834541c>] bus_for_each_dev+0x80/0x90 [<ffffff80083468f4>] driver_attach+0x20/0x28 [<ffffff8008346560>] bus_add_driver+0x194/0x1d8 [<ffffff8008347818>] driver_register+0x98/0xd0 [<ffffff80083486bc>] __platform_driver_register+0x48/0x50 [<ffffff80006df070>] gpu_init+0x70/0x1000 [galcore] [<ffffff8008083054>] do_one_initcall+0x70/0x178 [<ffffff8008115fd0>] do_init_module+0x58/0x1b8 [<ffffff80081015e4>] load_module+0x16e0/0x1c30 [<ffffff8008101cfc>] SyS_finit_module+0x7c/0x88 [<ffffff8008082ef0>] el0_svc_naked+0x24/0x28 Change-Id: I0067c119084b88edd980c52c9c9be8317fd25017 Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>

in tunnel mode, if outer interface(ipv4) is less, it is easily to let inner IPV6 mtu be less than 1280. If so, a Packet Too Big ICMPV6 message is received. When send again, packets are fragmentized with 1280, they are still rejected with ICMPV6(Packet Too Big) by xfrmi_xmit2(). According to RFC4213 Section3.2.2: if (IPv4 path MTU - 20) is less than 1280 if packet is larger than 1280 bytes Send ICMPv6 "packet too big" with MTU=1280 Drop packet else Encapsulate but do not set the Don't Fragment flag in the IPv4 header. The resulting IPv4 packet might be fragmented by the IPv4 layer on the encapsulator or by some router along the IPv4 path. endif else if packet is larger than (IPv4 path MTU - 20) Send ICMPv6 "packet too big" with MTU = (IPv4 path MTU - 20). Drop packet. else Encapsulate and set the Don't Fragment flag in the IPv4 header. endif endif Packets should be fragmentized with ipv4 outer interface, so change it. After it is fragemtized with ipv4, there will be double fragmenation. No.48 & No.51 are ipv6 fragment packets, No.48 is double fragmentized, then tunneled with IPv4(No.49& No.50), which obey spec. And received peer cannot decrypt it rightly. 48 2002::10 2002::11 1296(length) IPv6 fragment (off=0 more=y ident=0xa20da5bc nxt=50) 49 0x0000 (0) 2002::10 2002::11 1304 IPv6 fragment (off=0 more=y ident=0x7448042c nxt=44) 50 0x0000 (0) 2002::10 2002::11 200 ESP (SPI=0x00035000) 51 2002::10 2002::11 180 Echo (ping) request 52 0x56dc 2002::10 2002::11 248 IPv6 fragment (off=1232 more=n ident=0xa20da5bc nxt=50) xfrm6_noneed_fragment has fixed above issues. Finally, it acted like below: 1 0x6206 192.168.1.138 192.168.1.1 1316 Fragmented IP protocol (proto=Encap Security Payload 50, off=0, ID=6206) [Reassembled in #2] 2 0x6206 2002::10 2002::11 88 IPv6 fragment (off=0 more=y ident=0x1f440778 nxt=50) 3 0x0000 2002::10 2002::11 248 ICMPv6 Echo (ping) request Signed-off-by: Lina Wang <lina.wang@mediatek.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Bug: 226699354 Change-Id: Ideec82bea6a1efa26352680cb3113f7c36b945ef Signed-off-by: Lina Wang <lina.wang@mediatek.com>

This patch add support for DMA-based digital loopback. BACKGROUND Audio Products with AEC require loopback for echo cancellation. the hardware LP is not always available on some products, maybe the HW limitation(such as internal acodec) or HW Cost-down. This patch add support software DLP for such products. Enable: CONFIG_SND_SOC_ROCKCHIP_DLP &i2s { rockchip,digital-loopback; }; Mode List: amixer contents numid=2,iface=MIXER,name='Software Digital Loopback Mode' ; type=ENUMERATED,access=rw------,values=1,items=7 ; Item #0 'Disabled' ; Item #1 '2CH: 1 Loopback + 1 Mic' ; Item #2 '2CH: 1 Mic + 1 Loopback' ; Item #3 '2CH: 1 Mic + 1 Loopback-mixed' ; Item #4 '2CH: 2 Loopbacks' ; Item #5 '4CH: 2 Mics + 2 Loopbacks' ; Item #6 '4CH: 2 Mics + 1 Loopback-mixed' : values=0 Testenv: wired SDO0 --> SDI0 directly to get external digital loopback as reference. Testcase: dlp.sh /#!/bin/sh item=0 id=`amixer contents | grep "Software Digital Loopback" | \ awk -F ',' '{print $1}'` items=`amixer contents | grep -A 1 "Software Digital Loopback" | \ grep items | awk -F 'items=' '{print $2}'` echo "Software Digital Loopback: $id, items: $items" mode_chs() { case $1 in [0-4]) echo "2" ;; [5-6]) echo "4" ;; *) echo "2" ;; esac } while true do ch=`mode_chs $item` amixer -c 0 cset $id $item arecord -D hw:0,0 --period-size=1024 --buffer-size=4096 -r 48000 -c $ch -f s16_le \ -d 15 sine/dlp_$item.wav & sleep 2 for i in $(seq 1 10) do aplay -D hw:0,0 --period-size=1024 --buffer-size=8192 $((ch))ch.wav -d 1 done pid=$(ps | egrep "aplay|arecord" | grep -v grep | awk '{print $1}' | sort -r) for p in $pid do wait $p 2>/dev/null done item=$((item+1)) if [ $item -ge $items ]; then sleep 1 break fi done echo "Done" Result: do shell test and verify dlp_x.wav: * Alignment: ~1 samples shift (loopback <-> mics). * Integrity: no giltch, no data lost. * AEC: align loopback and mics sample and do simple AEC, get clean waveform. Logs: ... numid=2,iface=MIXER,name='Software Digital Loopback Mode' ; type=ENUMERATED,access=rw------,values=1,items=7 ; Item #0 'Disabled' ; Item #1 '2CH: 1 Loopback + 1 Mic' ; Item #2 '2CH: 1 Mic + 1 Loopback' ; Item #3 '2CH: 1 Mic + 1 Loopback-mixed' ; Item #4 '2CH: 2 Loopbacks' ; Item #5 '4CH: 2 Mics + 2 Loopbacks' ; Item #6 '4CH: 2 Mics + 1 Loopback-mixed' : values=2 Recording WAVE 'sine/dlp_2.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Playing WAVE '2ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Playing WAVE '2ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Playing WAVE '2ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Playing WAVE '2ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Playing WAVE '2ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Playing WAVE '2ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Playing WAVE '2ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Playing WAVE '2ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Playing WAVE '2ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Playing WAVE '2ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo ... numid=2,iface=MIXER,name='Software Digital Loopback Mode' ; type=ENUMERATED,access=rw------,values=1,items=7 ; Item #0 'Disabled' ; Item #1 '2CH: 1 Loopback + 1 Mic' ; Item #2 '2CH: 1 Mic + 1 Loopback' ; Item #3 '2CH: 1 Mic + 1 Loopback-mixed' ; Item #4 '2CH: 2 Loopbacks' ; Item #5 '4CH: 2 Mics + 2 Loopbacks' ; Item #6 '4CH: 2 Mics + 1 Loopback-mixed' : values=6 Recording WAVE 'sine/dlp_6.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Playing WAVE '4ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Playing WAVE '4ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Playing WAVE '4ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Playing WAVE '4ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Playing WAVE '4ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Playing WAVE '4ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Playing WAVE '4ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Playing WAVE '4ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Playing WAVE '4ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Playing WAVE '4ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Done Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Change-Id: I5772f0694f7a14a0f0bd1f0777b6c4cdbd781a64

Example: RK3588 Use I2S2_2CH as Clk-Gen to serve TDM_MULTI_LANES I2S2_2CH ----> BCLK,I2S_LRCK --------> I2S0_8CH_TX (Slave TRCM-TXONLY) | |--------> BCLK,TDM_SYNC --------> TDM Device (Slave) Note: I2S2_2CH_MCLK: BCLK I2S2_2CH_SCLK: I2S_LRCK (GPIO2_B7) I2S2_2CH_LRCK: TDM_SYNC (GPIO2_C0) DT: &i2s0_8ch { status = "okay"; assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; assigned-clock-parents = <&cru MCLK_I2S0_8CH_TX>; i2s-lrck-gpio = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>; tdm-fsync-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; rockchip,tdm-multi-lanes; rockchip,tdm-tx-lanes = <2>; //e.g. TDM16 x 2 rockchip,tdm-rx-lanes = <2>; //e.g. TDM16 x 2 rockchip,clk-src = <&i2s2_2ch>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_lrck &i2s0_sclk &i2s0_sdi0 &i2s0_sdi1 &i2s0_sdo0 &i2s0_sdo1>; }; &i2s2_2ch { status = "okay"; assigned-clocks = <&cru I2S2_2CH_MCLKOUT>; assigned-clock-parents = <&cru MCLK_I2S2_2CH>; pinctrl-names = "default"; pinctrl-0 = <&i2s2m0_mclk &i2s2m0_lrck &i2s2m0_sclk>; }; Usage: TDM16 x 2 Playback amixer contents numid=3,iface=MIXER,name='Receive SDIx Select' ; type=ENUMERATED,access=rw------,values=1,items=5 ; Item #0 'Auto' ; Item radxa#1 'SDIx1' ; Item radxa#2 'SDIx2' ; Item radxa#3 'SDIx3' ; Item radxa#4 'SDIx4' : values=0 numid=2,iface=MIXER,name='Transmit SDOx Select' ; type=ENUMERATED,access=rw------,values=1,items=5 ; Item #0 'Auto' ; Item radxa#1 'SDOx1' ; Item radxa#2 'SDOx2' ; Item radxa#3 'SDOx3' ; Item radxa#4 'SDOx4' : values=0 /# amixer sset "Transmit SDOx Select" "SDOx2" Simple mixer control 'Transmit SDOx Select',0 Capabilities: enum Items: 'Auto' 'SDOx1' 'SDOx2' 'SDOx3' 'SDOx4' Item0: 'SDOx2' /# aplay -D hw:0,0 --period-size=1024 --buffer-size=4096 -r 48000 \ -c 32 -f s32_le /dev/zero Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Change-Id: I6996e05c73a9d68bbeb9562eb6e68e4c99b52d85

Add MTL hw-plumbing enabling for KCR operation under PXP which includes: 1. Updating 'pick-gt' to get the media tile for KCR interrupt handling 2. Adding MTL's KCR registers for PXP operation (init, status-checking, etc.). While doing radxa#2, lets create a separate registers header file for PXP to be consistent with other i915 global subsystems. Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-3-alan.previn.teres.alexis@intel.com

…g/drm/drm-intel into drm-next drm/i915 feature pull radxa#2 for v6.5: Features and functionality: - Meteorlake PM demand (Vinod, Mika) - Switch to dedicated workqueues to stop using flush_scheduled_work() (Luca) Refactoring and cleanups: - Move display runtime init under display/ (Matt) - Async flip error message clarifications (Arun) Fixes: - Remove 10bit gamma on desktop gen3 parts, they don't support it (Ville) - Fix driver probe error handling if driver creation fails (Matt) - Fix all -Wunused-but-set-variable warnings, and enable it for i915 (Jani) - Stop using edid_blob_ptr (Jani) - Fix log level for "CDS interlane align done" (Khaled) - Fix an unnecessary include prefix (Matt) Merges: - Backmerge drm-next to sync with drm-intel-gt-next (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87o7lnpxz2.fsf@intel.com

In certain situations a program with subprograms may have a NULL extable entry. This should not happen, and when it does, it turns a single trap into multiple. Add a test case for further debugging and to prevent regressions. The test-case contains three essentially identical versions of the same test because just one program may not be sufficient to trigger the oops. This is due to the fact that the items are stored in a binary tree and have identical values so it's possible to sometimes find the ksym with the extable. With 3 copies, this has been reliable on this author's test systems. When triggered out of this test case, the oops looks like this: BUG: kernel NULL pointer dereference, address: 000000000000000c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [radxa#1] PREEMPT SMP NOPTI CPU: 0 PID: 1132 Comm: test_progs Tainted: G OE 6.4.0-rc3+ radxa#2 RIP: 0010:cmp_ex_search+0xb/0x30 Code: cc cc cc cc e8 36 cb 03 00 66 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 55 48 89 e5 48 8b 07 <48> 63 0e 48 01 f1 31 d2 48 39 c8 19 d2 48 39 c8 b8 01 00 00 00 0f RSP: 0018:ffffb30c4291f998 EFLAGS: 00010006 RAX: ffffffffc00b49da RBX: 0000000000000002 RCX: 000000000000000c RDX: 0000000000000002 RSI: 000000000000000c RDI: ffffb30c4291f9e8 RBP: ffffb30c4291f998 R08: ffffffffab1a42d0 R09: 0000000000000001 R10: 0000000000000000 R11: ffffffffab1a42d0 R12: ffffb30c4291f9e8 R13: 000000000000000c R14: 000000000000000c R15: 0000000000000000 FS: 00007fb5d9e044c0(0000) GS:ffff92e95ee00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000000c CR3: 000000010c3a2005 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> bsearch+0x41/0x90 ? __pfx_cmp_ex_search+0x10/0x10 ? bpf_prog_45a7907e7114d0ff_handle_fexit_ret_subprogs3+0x2a/0x6c search_extable+0x3b/0x60 ? bpf_prog_45a7907e7114d0ff_handle_fexit_ret_subprogs3+0x2a/0x6c search_bpf_extables+0x10d/0x190 ? bpf_prog_45a7907e7114d0ff_handle_fexit_ret_subprogs3+0x2a/0x6c search_exception_tables+0x5d/0x70 fixup_exception+0x3f/0x5b0 ? look_up_lock_class+0x61/0x110 ? __lock_acquire+0x6b8/0x3560 ? __lock_acquire+0x6b8/0x3560 ? __lock_acquire+0x6b8/0x3560 kernelmode_fixup_or_oops+0x46/0x110 __bad_area_nosemaphore+0x68/0x2b0 ? __lock_acquire+0x6b8/0x3560 bad_area_nosemaphore+0x16/0x20 do_kern_addr_fault+0x81/0xa0 exc_page_fault+0xd6/0x210 asm_exc_page_fault+0x2b/0x30 RIP: 0010:bpf_prog_45a7907e7114d0ff_handle_fexit_ret_subprogs3+0x2a/0x6c Code: f3 0f 1e fa 0f 1f 44 00 00 66 90 55 48 89 e5 f3 0f 1e fa 48 8b 7f 08 49 bb 00 00 00 00 00 80 00 00 4c 39 df 73 04 31 f6 eb 04 <48> 8b 77 00 49 bb 00 00 00 00 00 80 00 00 48 81 c7 7c 00 00 00 4c RSP: 0018:ffffb30c4291fcb8 EFLAGS: 00010282 RAX: 0000000000000001 RBX: 0000000000000001 RCX: 0000000000000000 RDX: 00000000cddf1af1 RSI: 000000005315a00d RDI: ffffffffffffffea RBP: ffffb30c4291fcb8 R08: ffff92e644bf38a8 R09: 0000000000000000 R10: 0000000000000000 R11: 0000800000000000 R12: ffff92e663652690 R13: 00000000000001c8 R14: 00000000000001c8 R15: 0000000000000003 bpf_trampoline_251255721842_2+0x63/0x1000 bpf_testmod_return_ptr+0x9/0xb0 [bpf_testmod] ? bpf_testmod_test_read+0x43/0x2d0 [bpf_testmod] sysfs_kf_bin_read+0x60/0x90 kernfs_fop_read_iter+0x143/0x250 vfs_read+0x240/0x2a0 ksys_read+0x70/0xe0 __x64_sys_read+0x1f/0x30 do_syscall_64+0x68/0xa0 ? syscall_exit_to_user_mode+0x77/0x1f0 ? do_syscall_64+0x77/0xa0 ? irqentry_exit+0x35/0xa0 ? sysvec_apic_timer_interrupt+0x4d/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fb5da00a392 Code: ac 00 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb be 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 RSP: 002b:00007ffc5b3cab68 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 000055bee7b8b100 RCX: 00007fb5da00a392 RDX: 00000000000001c8 RSI: 0000000000000000 RDI: 0000000000000009 RBP: 00007ffc5b3caba0 R08: 0000000000000000 R09: 0000000000000037 R10: 000055bee7b8c2a7 R11: 0000000000000246 R12: 000055bee78f1f60 R13: 00007ffc5b3cae90 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: bpf_testmod(OE) nls_iso8859_1 dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua intel_rapl_msr intel_rapl_common intel_uncore_frequency_common ppdev nfit crct10dif_pclmul crc32_pclmul psmouse ghash_clmulni_intel sha512_ssse3 aesni_intel parport_pc crypto_simd cryptd input_leds parport rapl ena i2c_piix4 mac_hid serio_raw ramoops reed_solomon pstore_blk drm pstore_zone efi_pstore autofs4 [last unloaded: bpf_testmod(OE)] CR2: 000000000000000c Though there may be some variation, depending on which suprogram triggers the bug. Signed-off-by: Krister Johansen <kjlx@templeofstupid.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/4ebf95ec857cd785b81db69f3e408c039ad8408b.1686616663.git.kjlx@templeofstupid.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Previously during mlx5e_ipsec_handle_event the driver tried to execute an operation that could sleep, while holding a spinlock, which caused the kernel panic mentioned below. Move the function call that can sleep outside of the spinlock context. Call Trace: <TASK> dump_stack_lvl+0x49/0x6c __schedule_bug.cold+0x42/0x4e schedule_debug.constprop.0+0xe0/0x118 __schedule+0x59/0x58a ? __mod_timer+0x2a1/0x3ef schedule+0x5e/0xd4 schedule_timeout+0x99/0x164 ? __pfx_process_timeout+0x10/0x10 __wait_for_common+0x90/0x1da ? __pfx_schedule_timeout+0x10/0x10 wait_func+0x34/0x142 [mlx5_core] mlx5_cmd_invoke+0x1f3/0x313 [mlx5_core] cmd_exec+0x1fe/0x325 [mlx5_core] mlx5_cmd_do+0x22/0x50 [mlx5_core] mlx5_cmd_exec+0x1c/0x40 [mlx5_core] mlx5_modify_ipsec_obj+0xb2/0x17f [mlx5_core] mlx5e_ipsec_update_esn_state+0x69/0xf0 [mlx5_core] ? wake_affine+0x62/0x1f8 mlx5e_ipsec_handle_event+0xb1/0xc0 [mlx5_core] process_one_work+0x1e2/0x3e6 ? __pfx_worker_thread+0x10/0x10 worker_thread+0x54/0x3ad ? __pfx_worker_thread+0x10/0x10 kthread+0xda/0x101 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x37 </TASK> BUG: workqueue leaked lock or atomic: kworker/u256:4/0x7fffffff/189754#012 last function: mlx5e_ipsec_handle_event [mlx5_core] CPU: 66 PID: 189754 Comm: kworker/u256:4 Kdump: loaded Tainted: G W 6.2.0-2596.20230309201517_5.el8uek.rc1.x86_64 radxa#2 Hardware name: Oracle Corporation ORACLE SERVER X9-2/ASMMBX9-2, BIOS 61070300 08/17/2022 Workqueue: mlx5e_ipsec: eth%d mlx5e_ipsec_handle_event [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x49/0x6c process_one_work.cold+0x2b/0x3c ? __pfx_worker_thread+0x10/0x10 worker_thread+0x54/0x3ad ? __pfx_worker_thread+0x10/0x10 kthread+0xda/0x101 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x37 </TASK> BUG: scheduling while atomic: kworker/u256:4/189754/0x00000000 Fixes: cee137a ("net/mlx5e: Handle ESN update events") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

…phys When booting with "intremap=off" and "x2apic_phys" on the kernel command line, the physical x2APIC driver ends up being used even when x2APIC mode is disabled ("intremap=off" disables x2APIC mode). This happens because the first compound condition check in x2apic_phys_probe() is false due to x2apic_mode == 0 and so the following one returns true after default_acpi_madt_oem_check() having already selected the physical x2APIC driver. This results in the following panic: kernel BUG at arch/x86/kernel/apic/io_apic.c:2409! invalid opcode: 0000 [radxa#1] PREEMPT SMP NOPTI CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-rc2-ver4.1rc2 radxa#2 Hardware name: Dell Inc. PowerEdge R6515/07PXPY, BIOS 2.3.6 07/06/2021 RIP: 0010:setup_IO_APIC+0x9c/0xaf0 Call Trace: <TASK> ? native_read_msr apic_intr_mode_init x86_late_time_init start_kernel x86_64_start_reservations x86_64_start_kernel secondary_startup_64_no_verify </TASK> which is: setup_IO_APIC: apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); for_each_ioapic(ioapic) BUG_ON(mp_irqdomain_create(ioapic)); Return 0 to denote that x2APIC has not been enabled when probing the physical x2APIC driver. [ bp: Massage commit message heavily. ] Fixes: 9ebd680 ("x86, apic: Use probe routines to simplify apic selection") Signed-off-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Kishon Vijay Abraham I <kvijayab@amd.com> Reviewed-by: Vasant Hegde <vasant.hegde@amd.com> Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230616212236.1389-1-dheerajkumar.srivastava@amd.com

Example: RK3588 Use I2S2_2CH as Clk-Gen to serve TDM_MULTI_LANES I2S2_2CH ----> BCLK,I2S_LRCK --------> I2S0_8CH_TX (Slave TRCM-TXONLY) | |--------> BCLK,TDM_SYNC --------> TDM Device (Slave) Note: I2S2_2CH_MCLK: BCLK I2S2_2CH_SCLK: I2S_LRCK (GPIO2_B7) I2S2_2CH_LRCK: TDM_SYNC (GPIO2_C0) DT: &i2s0_8ch { status = "okay"; assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; assigned-clock-parents = <&cru MCLK_I2S0_8CH_TX>; i2s-lrck-gpio = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>; tdm-fsync-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; rockchip,tdm-multi-lanes; rockchip,tdm-tx-lanes = <2>; //e.g. TDM16 x 2 rockchip,tdm-rx-lanes = <2>; //e.g. TDM16 x 2 rockchip,clk-src = <&i2s2_2ch>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_lrck &i2s0_sclk &i2s0_sdi0 &i2s0_sdi1 &i2s0_sdo0 &i2s0_sdo1>; }; &i2s2_2ch { status = "okay"; assigned-clocks = <&cru I2S2_2CH_MCLKOUT>; assigned-clock-parents = <&cru MCLK_I2S2_2CH>; pinctrl-names = "default"; pinctrl-0 = <&i2s2m0_mclk &i2s2m0_lrck &i2s2m0_sclk>; }; Usage: TDM16 x 2 Playback amixer contents numid=3,iface=MIXER,name='Receive SDIx Select' ; type=ENUMERATED,access=rw------,values=1,items=5 ; Item #0 'Auto' ; Item radxa#1 'SDIx1' ; Item radxa#2 'SDIx2' ; Item radxa#3 'SDIx3' ; Item radxa#4 'SDIx4' : values=0 numid=2,iface=MIXER,name='Transmit SDOx Select' ; type=ENUMERATED,access=rw------,values=1,items=5 ; Item #0 'Auto' ; Item radxa#1 'SDOx1' ; Item radxa#2 'SDOx2' ; Item radxa#3 'SDOx3' ; Item radxa#4 'SDOx4' : values=0 /# amixer sset "Transmit SDOx Select" "SDOx2" Simple mixer control 'Transmit SDOx Select',0 Capabilities: enum Items: 'Auto' 'SDOx1' 'SDOx2' 'SDOx3' 'SDOx4' Item0: 'SDOx2' /# aplay -D hw:0,0 --period-size=1024 --buffer-size=4096 -r 48000 \ -c 32 -f s32_le /dev/zero Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Change-Id: I6996e05c73a9d68bbeb9562eb6e68e4c99b52d85

When using rockchip mpp I meet the folowing kernel crash. Diabling DMA-BUF debug checks solves the issue. Unable to handle kernel paging request at virtual address ffffffffa42fc000 Mem abort info: ESR = 0x0000000096000145 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000145 CM = 1, WnR = 1 swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000001cfb000 [ffffffffa42fc000] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000145 [#2] SMP Modules linked in: CPU: 7 PID: 2081 Comm: mppvideodec0:sr Tainted: G D 6.1.43-6-rockchip-g32498cfaff7c #1 Hardware name: Radxa ROCK 5B (DT) pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : dcache_inval_poc+0x40/0x58 lr : arch_sync_dma_for_cpu+0x30/0x3c sp : ffffffc00ba83c90 x29: ffffffc00ba83c90 x28: ffffff8002fa1e80 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000014 x23: 0000007f8e04e1f0 x22: 0000000000000001 x21: 0000000000000002 x20: 000000000000001e x19: ffffff8004b84c00 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000007f8e04e1f0 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffffc00871b6c4 x8 : 0000000000000001 x7 : ffffff8003e2fd38 x6 : ffffffc00ba83d88 x5 : ffffffc00ba83d88 x4 : ffffffc00871b660 x3 : 000000000000003f x2 : 0000000000000040 x1 : ffffffffa43fc000 x0 : ffffffffa42fc000 Call trace: dcache_inval_poc+0x40/0x58 iommu_dma_sync_sg_for_cpu+0x64/0xbc dma_sync_sg_for_cpu+0x40/0x44 system_heap_dma_buf_begin_cpu_access+0x7c/0x84 dma_buf_begin_cpu_access+0x3c/0x70 dma_buf_ioctl+0x12c/0x2fc vfs_ioctl+0x2c/0x48 __arm64_sys_ioctl+0x7c/0xac invoke_syscall+0x80/0x10c el0_svc_common.constprop.0+0xc8/0x118 do_el0_svc+0x20/0x28 el0_svc+0x14/0x3c el0t_64_sync_handler+0x90/0xf8 el0t_64_sync+0x158/0x15c Signed-off-by: Stephen Chen <stephen@radxa.com>

Arm has introduced a new v10 GPU architecture that replaces the Job Manager interface with a new Command Stream Frontend. It adds firmware driven command stream queues that can be used by kernel and user space to submit jobs to the GPU. Add the initial schema for the device tree that is based on support for RK3588 SoC. The minimum number of clocks is one for the IP, but on Rockchip platforms they will tend to expose the semi-independent clocks for better power management. v5: - Move the opp-table node under the gpu node v4: - Fix formatting issue v3: - Cleanup commit message to remove redundant text - Added opp-table property and re-ordered entries - Clarified power-domains and power-domain-names requirements for RK3588. - Cleaned up example Note: power-domains and power-domain-names requirements for other platforms are still work in progress, hence the bindings are left incomplete here. v2: - New commit Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Conor Dooley <conor+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Rob Herring <robh@kernel.org> drm: execution context for GEM buffers v7 This adds the infrastructure for an execution context for GEM buffers which is similar to the existing TTMs execbuf util and intended to replace it in the long term. The basic functionality is that we abstracts the necessary loop to lock many different GEM buffers with automated deadlock and duplicate handling. v2: drop xarray and use dynamic resized array instead, the locking overhead is unnecessary and measurable. v3: drop duplicate tracking, radeon is really the only one needing that. v4: fixes issues pointed out by Danilo, some typos in comments and a helper for lock arrays of GEM objects. v5: some suggestions by Boris Brezillon, especially just use one retry macro, drop loop in prepare_array, use flags instead of bool v6: minor changes suggested by Thomas, Boris and Danilo v7: minor typos pointed out by checkpatch.pl fixed Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Danilo Krummrich <dakr@redhat.com> Tested-by: Danilo Krummrich <dakr@redhat.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230711133122.3710-2-christian.koenig@amd.com drm: manager to keep track of GPUs VA mappings Add infrastructure to keep track of GPU virtual address (VA) mappings with a decicated VA space manager implementation. New UAPIs, motivated by Vulkan sparse memory bindings graphics drivers start implementing, allow userspace applications to request multiple and arbitrary GPU VA mappings of buffer objects. The DRM GPU VA manager is intended to serve the following purposes in this context. 1) Provide infrastructure to track GPU VA allocations and mappings, using an interval tree (RB-tree). 2) Generically connect GPU VA mappings to their backing buffers, in particular DRM GEM objects. 3) Provide a common implementation to perform more complex mapping operations on the GPU VA space. In particular splitting and merging of GPU VA mappings, e.g. for intersecting mapping requests or partial unmap requests. Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Acked-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Tested-by: Matthew Brost <matthew.brost@intel.com> Tested-by: Donald Robson <donald.robson@imgtec.com> Suggested-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230720001443.2380-2-dakr@redhat.com drm: manager: Fix printk format for size_t sizeof() returns a size_t which may be different to an unsigned long. Use the correct format specifier of '%zu' to prevent compiler warnings. Fixes: e6303f323b1a ("drm: manager to keep track of GPUs VA mappings") Reviewed-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/2bf64010-c40a-8b84-144c-5387412b579e@arm.com drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map() The prev pointer in __drm_gpuva_sm_map() was used to implement automatic merging of mappings. Since automatic merging did not make its way upstream, remove this leftover. Fixes: e6303f323b1a ("drm: manager to keep track of GPUs VA mappings") Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230823233119.2891-1-dakr@redhat.com drm/gpuvm: rename struct drm_gpuva_manager to struct drm_gpuvm Rename struct drm_gpuva_manager to struct drm_gpuvm including corresponding functions. This way the GPUVA manager's structures align very well with the documentation of VM_BIND [1] and VM_BIND locking [2]. It also provides a better foundation for the naming of data structures and functions introduced for implementing a common dma-resv per GPU-VM including tracking of external and evicted objects in subsequent patches. [1] Documentation/gpu/drm-vm-bind-async.rst [2] Documentation/gpu/drm-vm-bind-locking.rst Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Acked-by: Dave Airlie <airlied@redhat.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230920144343.64830-2-dakr@redhat.com drm/gpuvm: allow building as module HB: drivers/gpu/drm/nouveau/Kconfig skipped because there is no gpuvm support of nouveau in 6.1 Currently, the DRM GPUVM does not have any core dependencies preventing a module build. Also, new features from subsequent patches require helpers (namely drm_exec) which can be built as module. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230920144343.64830-3-dakr@redhat.com drm/gpuvm: convert WARN() to drm_WARN() variants HB: drivers/gpu/drm/nouveau/nouveau_uvmm.c skipped since 6.1 does not support gpuvm on nv Use drm_WARN() and drm_WARN_ON() variants to indicate drivers the context the failing VM resides in. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-2-dakr@redhat.com drm/gpuvm: don't always WARN in drm_gpuvm_check_overflow() Don't always WARN in drm_gpuvm_check_overflow() and separate it into a drm_gpuvm_check_overflow() and a dedicated drm_gpuvm_warn_check_overflow() variant. This avoids printing warnings due to invalid userspace requests. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-3-dakr@redhat.com drm/gpuvm: export drm_gpuvm_range_valid() Drivers may use this function to validate userspace requests in advance, hence export it. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-4-dakr@redhat.com drm/gpuvm: add common dma-resv per struct drm_gpuvm hb: drivers/gpu/drm/nouveau/nouveau_uvmm.c skipped Provide a common dma-resv for GEM objects not being used outside of this GPU-VM. This is used in a subsequent patch to generalize dma-resv, external and evicted object handling and GEM validation. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-6-dakr@redhat.com drm/gpuvm: add drm_gpuvm_flags to drm_gpuvm HB: drivers/gpu/drm/nouveau/nouveau_uvmm.c skipped Introduce flags for struct drm_gpuvm, this required by subsequent commits. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-8-dakr@redhat.com drm/gpuvm: reference count drm_gpuvm structures HB: drivers/gpu/drm/nouveau/nouveau_uvmm.c skipped Implement reference counting for struct drm_gpuvm. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-10-dakr@redhat.com drm/gpuvm: add an abstraction for a VM / BO combination HB: drivers/gpu/drm/nouveau/nouveau_uvmm.c skipped Add an abstraction layer between the drm_gpuva mappings of a particular drm_gem_object and this GEM object itself. The abstraction represents a combination of a drm_gem_object and drm_gpuvm. The drm_gem_object holds a list of drm_gpuvm_bo structures (the structure representing this abstraction), while each drm_gpuvm_bo contains list of mappings of this GEM object. This has multiple advantages: 1) We can use the drm_gpuvm_bo structure to attach it to various lists of the drm_gpuvm. This is useful for tracking external and evicted objects per VM, which is introduced in subsequent patches. 2) Finding mappings of a certain drm_gem_object mapped in a certain drm_gpuvm becomes much cheaper. 3) Drivers can derive and extend the structure to easily represent driver specific states of a BO for a certain GPUVM. The idea of this abstraction was taken from amdgpu, hence the credit for this idea goes to the developers of amdgpu. Cc: Christian König <christian.koenig@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-11-dakr@redhat.com drm/gpuvm: track/lock/validate external/evicted objects Currently the DRM GPUVM offers common infrastructure to track GPU VA allocations and mappings, generically connect GPU VA mappings to their backing buffers and perform more complex mapping operations on the GPU VA space. However, there are more design patterns commonly used by drivers, which can potentially be generalized in order to make the DRM GPUVM represent a basis for GPU-VM implementations. In this context, this patch aims at generalizing the following elements. 1) Provide a common dma-resv for GEM objects not being used outside of this GPU-VM. 2) Provide tracking of external GEM objects (GEM objects which are shared with other GPU-VMs). 3) Provide functions to efficiently lock all GEM objects dma-resv the GPU-VM contains mappings of. 4) Provide tracking of evicted GEM objects the GPU-VM contains mappings of, such that validation of evicted GEM objects is accelerated. 5) Provide some convinience functions for common patterns. Big thanks to Boris Brezillon for his help to figure out locking for drivers updating the GPU VA space within the fence signalling path. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Suggested-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-12-dakr@redhat.com drm/gpuvm: fall back to drm_exec_lock_obj() Fall back to drm_exec_lock_obj() if num_fences is zero for the drm_gpuvm_prepare_* function family. Otherwise dma_resv_reserve_fences() would actually allocate slots even though num_fences is zero. Cc: Christian König <christian.koenig@amd.com> Acked-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231129220835.297885-2-dakr@redhat.com drm/gpuvm: Let drm_gpuvm_bo_put() report when the vm_bo object is destroyed Some users need to release resources attached to the vm_bo object when it's destroyed. In Panthor's case, we need to release the pin ref so BO pages can be returned to the system when all GPU mappings are gone. This could be done through a custom drm_gpuvm::vm_bo_free() hook, but this has all sort of locking implications that would force us to expose a drm_gem_shmem_unpin_locked() helper, not to mention the fact that having a ::vm_bo_free() implementation without a ::vm_bo_alloc() one seems odd. So let's keep things simple, and extend drm_gpuvm_bo_put() to report when the object is destroyed. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231204151406.1977285-1-boris.brezillon@collabora.com drm/exec: Pass in initial # of objects HB: skipped drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c drivers/gpu/drm/amd/amdgpu/amdgpu_csa.c drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c drivers/gpu/drm/amd/amdgpu/amdgpu_umsch_mm.c drivers/gpu/drm/amd/amdkfd/kfd_svm.c drivers/gpu/drm/imagination/pvr_job.c drivers/gpu/drm/nouveau/nouveau_uvmm.c In cases where the # is known ahead of time, it is silly to do the table resize dance. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Christian König <christian.koenig@amd.com> Patchwork: https://patchwork.freedesktop.org/patch/568338/ drm/gem-shmem: When drm_gem_object_init failed, should release object when goto err_free, the object had init, so it should be release when fail. Signed-off-by: ChunyouTang <tangchunyou@163.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20221119064131.364-1-tangchunyou@163.com drm: Remove usage of deprecated DRM_DEBUG_PRIME drm_print.h says DRM_DEBUG_PRIME is deprecated in favor of drm_dbg_prime(). Signed-off-by: Siddh Raman Pant <code@siddh.me> Reviewed-by: Simon Ser <contact@emersion.fr> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/cd663b1bc42189e55898cddecdb3b73c591b341a.1673269059.git.code@siddh.me drm/shmem: Cleanup drm_gem_shmem_create_with_handle() Once we create the handle, the handle owns the reference. Currently nothing was doing anything with the shmem ptr after the handle was created, but let's change drm_gem_shmem_create_with_handle() to not return the pointer, so-as to not encourage problematic use of this function in the future. As a bonus, it makes the code a bit cleaner. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230123154831.3191821-1-robdclark@gmail.com drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt() Other functions touching shmem->sgt take the pages lock, so do that here too. drm_gem_shmem_get_pages() & co take the same lock, so move to the _locked() variants to avoid recursive locking. Discovered while auditing locking to write the Rust abstractions. Fixes: 2194a63a818d ("drm: Add library for shmem backed GEM objects") Fixes: 4fa3d66f132b ("drm/shmem: Do dma_unmap_sg before purging pages") Signed-off-by: Asahi Lina <lina@asahilina.net> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230205125124.2260-1-lina@asahilina.net drm/shmem-helper: Switch to use drm_* debug helpers Ease debugging of a multi-GPU system by using drm_WARN_*() and drm_dbg_kms() helpers that print out DRM device name corresponding to shmem GEM. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Suggested-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/all/20230108210445.3948344-6-dmitry.osipenko@collabora.com/ drm/shmem-helper: Don't use vmap_use_count for dma-bufs DMA-buf core has its own refcounting of vmaps, use it instead of drm-shmem counting. This change prepares drm-shmem for addition of memory shrinker support where drm-shmem will use a single dma-buf reservation lock for all operations performed over dma-bufs. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/all/20230108210445.3948344-7-dmitry.osipenko@collabora.com/ drm/shmem-helper: Switch to reservation lock Replace all drm-shmem locks with a GEM reservation lock. This makes locks consistent with dma-buf locking convention where importers are responsible for holding reservation lock for all operations performed over dma-bufs, preventing deadlock between dma-buf importers and exporters. Suggested-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/all/20230108210445.3948344-8-dmitry.osipenko@collabora.com/ drm/shmem-helper: Revert accidental non-GPL export The referenced commit added a wrapper for drm_gem_shmem_get_pages_sgt(), but in the process it accidentally changed the export type from GPL to non-GPL. Switch it back to GPL. Reported-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Fixes: ddddedaa0db9 ("drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()") Signed-off-by: Asahi Lina <lina@asahilina.net> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230227-shmem-export-fix-v1-1-8880b2c25e81@asahilina.net Revert "drm/shmem-helper: Switch to reservation lock" This reverts commit 67b7836d4458790f1261e31fe0ce3250989784f0. The locking appears incomplete. A caller of SHMEM helper's pin function never acquires the dma-buf reservation lock. So we get WARNING: CPU: 3 PID: 967 at drivers/gpu/drm/drm_gem_shmem_helper.c:243 drm_gem_shmem_pin+0x42/0x90 [drm_shmem_helper] Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230228152612.19971-1-tzimmermann@suse.de drm/shmem-helper: Switch to reservation lock Replace all drm-shmem locks with a GEM reservation lock. This makes locks consistent with dma-buf locking convention where importers are responsible for holding reservation lock for all operations performed over dma-bufs, preventing deadlock between dma-buf importers and exporters. Suggested-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-7-dmitry.osipenko@collabora.com drm/shmem-helper: Reset vma->vm_ops before calling dma_buf_mmap() The dma-buf backend is supposed to provide its own vm_ops, but some implementation just have nothing special to do and leave vm_ops untouched, probably expecting this field to be zero initialized (this is the case with the system_heap implementation for instance). Let's reset vma->vm_ops to NULL to keep things working with these implementations. Fixes: 26d3ac3cb04d ("drm/shmem-helpers: Redirect mmap for imported dma-buf") Cc: <stable@vger.kernel.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reported-by: Roman Stratiienko <r.stratiienko@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Tested-by: Roman Stratiienko <r.stratiienko@gmail.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230724112610.60974-1-boris.brezillon@collabora.com iommu: Allow passing custom allocators to pgtable drivers This will be useful for GPU drivers who want to keep page tables in a pool so they can: - keep freed page tables in a free pool and speed-up upcoming page table allocations - batch page table allocation instead of allocating one page at a time - pre-reserve pages for page tables needed for map/unmap operations, to ensure map/unmap operations don't try to allocate memory in paths they're allowed to block or fail It might also be valuable for other aspects of GPU and similar use-cases, like fine-grained memory accounting and resource limiting. We will extend the Arm LPAE format to support custom allocators in a separate commit. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20231124142434.1577550-2-boris.brezillon@collabora.com Signed-off-by: Joerg Roedel <jroedel@suse.de> iommu: Extend LPAE page table format to support custom allocators We need that in order to implement the VM_BIND ioctl in the GPU driver targeting new Mali GPUs. VM_BIND is about executing MMU map/unmap requests asynchronously, possibly after waiting for external dependencies encoded as dma_fences. We intend to use the drm_sched framework to automate the dependency tracking and VM job dequeuing logic, but this comes with its own set of constraints, one of them being the fact we are not allowed to allocate memory in the drm_gpu_scheduler_ops::run_job() to avoid this sort of deadlocks: - VM_BIND map job needs to allocate a page table to map some memory to the VM. No memory available, so kswapd is kicked - GPU driver shrinker backend ends up waiting on the fence attached to the VM map job or any other job fence depending on this VM operation. With custom allocators, we will be able to pre-reserve enough pages to guarantee the map/unmap operations we queued will take place without going through the system allocator. But we can also optimize allocation/reservation by not free-ing pages immediately, so any upcoming page table allocation requests can be serviced by some free page table pool kept at the driver level. I might also be valuable for other aspects of GPU and similar use-cases, like fine-grained memory accounting and resource limiting. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20231124142434.1577550-3-boris.brezillon@collabora.com Signed-off-by: Joerg Roedel <jroedel@suse.de> drm/sched: Add FIFO sched policy to run queue When many entities are competing for the same run queue on the same scheduler, we observe an unusually long wait times and some jobs get starved. This has been observed on GPUVis. The issue is due to the Round Robin policy used by schedulers to pick up the next entity's job queue for execution. Under stress of many entities and long job queues within entity some jobs could be stuck for very long time in it's entity's queue before being popped from the queue and executed while for other entities with smaller job queues a job might execute earlier even though that job arrived later then the job in the long queue. Fix: Add FIFO selection policy to entities in run queue, chose next entity on run queue in such order that if job on one entity arrived earlier then job on another entity the first job will start executing earlier regardless of the length of the entity's job queue. v2: Switch to rb tree structure for entities based on TS of oldest job waiting in the job queue of an entity. Improves next entity extraction to O(1). Entity TS update O(log N) where N is the number of entities in the run-queue Drop default option in module control parameter. v3: Various cosmetical fixes and minor refactoring of fifo update function. (Luben) v4: Switch drm_sched_rq_select_entity_fifo to in order search (Luben) v5: Fix up drm_sched_rq_select_entity_fifo loop (Luben) v6: Add missing drm_sched_rq_remove_fifo_locked v7: Fix ts sampling bug and more cosmetic stuff (Luben) v8: Fix module parameter string (Luben) Cc: Luben Tuikov <luben.tuikov@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Direct Rendering Infrastructure - Development <dri-devel@lists.freedesktop.org> Cc: AMD Graphics <amd-gfx@lists.freedesktop.org> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Tested-by: Yunxiang Li (Teddy) <Yunxiang.Li@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220930041258.1050247-1-luben.tuikov@amd.com drm/scheduler: Set the FIFO scheduling policy as the default The currently default Round-Robin GPU scheduling can result in starvation of entities which have a large number of jobs, over entities which have a very small number of jobs (single digit). This can be illustrated in the following diagram, where jobs are alphabetized to show their chronological order of arrival, where job A is the oldest, B is the second oldest, and so on, to J, the most recent job to arrive. ---> entities j | H-F-----A--E--I-- o | --G-----B-----J-- b | --------C-------- s\/ --------D-------- WLOG, assuming all jobs are "ready", then a R-R scheduling will execute them in the following order (a slice off of the top of the entities' list), H, F, A, E, I, G, B, J, C, D. However, to mitigate job starvation, we'd rather execute C and D before E, and so on, given, of course, that they're all ready to be executed. So, if all jobs are ready at this instant, the order of execution for this and the next 9 instances of picking the next job to execute, should really be, A, B, C, D, E, F, G, H, I, J, which is their chronological order. The only reason for this order to be broken, is if an older job is not yet ready, but a younger job is ready, at an instant of picking a new job to execute. For instance if job C wasn't ready at time 2, but job D was ready, then we'd pick job D, like this: 0 +1 +2 ... A, B, D, ... And from then on, C would be preferred before all other jobs, if it is ready at the time when a new job for execution is picked. So, if C became ready two steps later, the execution order would look like this: ......0 +1 +2 ... A, B, D, E, C, F, G, H, I, J This is what the FIFO GPU scheduling algorithm achieves. It uses a Red-Black tree to keep jobs sorted in chronological order, where picking the oldest job is O(1) (we use the "cached" structure), and balancing the tree is O(log n). IOW, it picks the *oldest ready* job to execute now. The implementation is already in the kernel, and this commit only changes the default GPU scheduling algorithm to use. This was tested and achieves about 1% faster performance over the Round Robin algorithm. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Cc: Direct Rendering Infrastructure - Development <dri-devel@lists.freedesktop.org> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221024212634.27230-1-luben.tuikov@amd.com Signed-off-by: Christian König <christian.koenig@amd.com> drm/scheduler: add drm_sched_job_add_resv_dependencies Add a new function to update job dependencies from a resv obj. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-3-christian.koenig@amd.com drm/scheduler: remove drm_sched_dependency_optimized Not used any more. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-12-christian.koenig@amd.com drm/scheduler: rework entity flush, kill and fini This was buggy because when we had to wait for entities which were killed as well we would just deadlock. Instead move all the dependency handling into the callbacks so that will all happen asynchronously. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-13-christian.koenig@amd.com drm/scheduler: rename dependency callback into prepare_job This now matches much better what this is doing. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-14-christian.koenig@amd.com drm/amdgpu: revert "implement tdr advanced mode" This reverts commit e6c6338f393b74ac0b303d567bb918b44ae7ad75. This feature basically re-submits one job after another to figure out which one was the one causing a hang. This is obviously incompatible with gang-submit which requires that multiple jobs run at the same time. It's also absolutely not helpful to crash the hardware multiple times if a clean recovery is desired. For testing and debugging environments we should rather disable recovery alltogether to be able to inspect the state with a hw debugger. Additional to that the sw implementation is clearly buggy and causes reference count issues for the hardware fence. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> drm/scheduler: Fix lockup in drm_sched_entity_kill() The drm_sched_entity_kill() is invoked twice by drm_sched_entity_destroy() while userspace process is exiting or being killed. First time it's invoked when sched entity is flushed and second time when entity is released. This causes a lockup within wait_for_completion(entity_idle) due to how completion API works. Calling wait_for_completion() more times than complete() was invoked is a error condition that causes lockup because completion internally uses counter for complete/wait calls. The complete_all() must be used instead in such cases. This patch fixes lockup of Panfrost driver that is reproducible by killing any application in a middle of 3d drawing operation. Fixes: 2fdb8a8f07c2 ("drm/scheduler: rework entity flush, kill and fini") Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221123001303.533968-1-dmitry.osipenko@collabora.com drm/scheduler: deprecate drm_sched_resubmit_jobs This interface is not working as it should. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221109095010.141189-5-christian.koenig@amd.com drm/scheduler: track GPU active time per entity Track the accumulated time that jobs from this entity were active on the GPU. This allows drivers using the scheduler to trivially implement the DRM fdinfo when the hardware doesn't provide more specific information than signalling job completion anyways. [Bagas: Append missing colon to @elapsed_ns] Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> drm/sched: Create wrapper to add a syncobj dependency to job In order to add a syncobj's fence as a dependency to a job, it is necessary to call drm_syncobj_find_fence() to find the fence and then add the dependency with drm_sched_job_add_dependency(). So, wrap these steps in one single function, drm_sched_job_add_syncobj_dependency(). Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230209124447.467867-2-mcanal@igalia.com drm/scheduler: Fix variable name in function description Compiling AMD GPU drivers displays two warnings: drivers/gpu/drm/scheduler/sched_main.c:738: warning: Function parameter or member 'file' not described in 'drm_sched_job_add_syncobj_dependency' drivers/gpu/drm/scheduler/sched_main.c:738: warning: Excess function parameter 'file_private' description in 'drm_sched_job_add_syncobj_dependency' Get rid of them by renaming the variable name on the function description Signed-off-by: Caio Novais <caionovais@usp.br> Link: https://lore.kernel.org/r/20230325131532.6356-1-caionovais@usp.br Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> drm/scheduler: Add fence deadline support As the finished fence is the one that is exposed to userspace, and therefore the one that other operations, like atomic update, would block on, we need to propagate the deadline from from the finished fence to the actual hw fence. v2: Split into drm_sched_fence_set_parent() (ckoenig) v3: Ensure a thread calling drm_sched_fence_set_deadline_finished() sees fence->parent set before drm_sched_fence_set_parent() does this test_bit(DMA_FENCE_FLAG_HAS_DEADLINE_BIT). Signed-off-by: Rob Clark <robdclark@chromium.org> Acked-by: Luben Tuikov <luben.tuikov@amd.com> Revert "drm/scheduler: track GPU active time per entity" This reverts commit df622729ddbf as it introduces a use-after-free, which isn't easy to fix without going back to the design drawing board. Reported-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> drm/scheduler: Fix UAF race in drm_sched_entity_push_job() After a job is pushed into the queue, it is owned by the scheduler core and may be freed at any time, so we can't write nor read the submit timestamp after that point. Fixes oopses observed with the drm/asahi driver, found with kASAN. Signed-off-by: Asahi Lina <lina@asahilina.net> Link: https://lore.kernel.org/r/20230406-scheduler-uaf-2-v1-1-972531cf0a81@asahilina.net Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> drm/sched: Check scheduler ready before calling timeout handling During an IGT GPU reset test we see the following oops, [ +0.000003] ------------[ cut here ]------------ [ +0.000000] WARNING: CPU: 9 PID: 0 at kernel/workqueue.c:1656 __queue_delayed_work+0x6d/0xa0 [ +0.000004] Modules linked in: iptable_filter bpfilter amdgpu(OE) nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_generic intel_rapl_msr ledtrig_audio snd_hda_codec_hdmi intel_rapl_common snd_hda_intel edac_mce_amd snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core iommu_v2 gpu_sched(OE) kvm_amd drm_buddy snd_hwdep kvm video drm_ttm_helper snd_pcm ttm snd_seq_midi drm_display_helper snd_seq_midi_event snd_rawmidi cec crct10dif_pclmul ghash_clmulni_intel sha512_ssse3 snd_seq aesni_intel rc_core crypto_simd cryptd binfmt_misc drm_kms_helper rapl snd_seq_device input_leds joydev snd_timer i2c_algo_bit syscopyarea snd ccp sysfillrect sysimgblt wmi_bmof k10temp soundcore mac_hid sch_fq_codel msr parport_pc ppdev drm lp parport ramoops reed_solomon pstore_blk pstore_zone efi_pstore ip_tables x_tables autofs4 hid_generic usbhid hid r8169 ahci xhci_pci gpio_amdpt realtek i2c_piix4 wmi crc32_pclmul xhci_pci_renesas libahci gpio_generic [ +0.000070] CPU: 9 PID: 0 Comm: swapper/9 Tainted: G W OE 6.1.11+ #2 [ +0.000003] Hardware name: Gigabyte Technology Co., Ltd. AB350-Gaming 3/AB350-Gaming 3-CF, BIOS F7 06/16/2017 [ +0.000001] RIP: 0010:__queue_delayed_work+0x6d/0xa0 [ +0.000003] Code: 7a 50 48 01 c1 48 89 4a 30 81 ff 00 20 00 00 75 38 4c 89 cf e8 64 3e 0a 00 5d e9 1e c5 11 01 e8 99 f7 ff ff 5d e9 13 c5 11 01 <0f> 0b eb c1 0f 0b 48 81 7a 38 70 5c 0e 81 74 9f 0f 0b 48 8b 42 28 [ +0.000002] RSP: 0018:ffffc90000398d60 EFLAGS: 00010007 [ +0.000002] RAX: ffff88810d589c60 RBX: 0000000000000000 RCX: 0000000000000000 [ +0.000002] RDX: ffff88810d589c58 RSI: 0000000000000000 RDI: 0000000000002000 [ +0.000001] RBP: ffffc90000398d60 R08: 0000000000000000 R09: ffff88810d589c78 [ +0.000002] R10: 72705f305f39765f R11: 7866673a6d72645b R12: ffff88810d589c58 [ +0.000001] R13: 0000000000002000 R14: 0000000000000000 R15: 0000000000000000 [ +0.000002] FS: 0000000000000000(0000) GS:ffff8887fee40000(0000) knlGS:0000000000000000 [ +0.000001] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000002] CR2: 00005562c4797fa0 CR3: 0000000110da0000 CR4: 00000000003506e0 [ +0.000002] Call Trace: [ +0.000001] <IRQ> [ +0.000001] mod_delayed_work_on+0x5e/0xa0 [ +0.000004] drm_sched_fault+0x23/0x30 [gpu_sched] [ +0.000007] gfx_v9_0_fault.isra.0+0xa6/0xd0 [amdgpu] [ +0.000258] gfx_v9_0_priv_reg_irq+0x29/0x40 [amdgpu] [ +0.000254] amdgpu_irq_dispatch+0x1ac/0x2b0 [amdgpu] [ +0.000243] amdgpu_ih_process+0x89/0x130 [amdgpu] [ +0.000245] amdgpu_irq_handler+0x24/0x60 [amdgpu] [ +0.000165] __handle_irq_event_percpu+0x4f/0x1a0 [ +0.000003] handle_irq_event_percpu+0x15/0x50 [ +0.000001] handle_irq_event+0x39/0x60 [ +0.000002] handle_edge_irq+0xa8/0x250 [ +0.000003] __common_interrupt+0x7b/0x150 [ +0.000002] common_interrupt+0xc1/0xe0 [ +0.000003] </IRQ> [ +0.000000] <TASK> [ +0.000001] asm_common_interrupt+0x27/0x40 [ +0.000002] RIP: 0010:native_safe_halt+0xb/0x10 [ +0.000003] Code: 46 ff ff ff cc cc cc cc cc cc cc cc cc cc cc eb 07 0f 00 2d 69 f2 5e 00 f4 e9 f1 3b 3e 00 90 eb 07 0f 00 2d 59 f2 5e 00 fb f4 <e9> e0 3b 3e 00 0f 1f 44 00 00 55 48 89 e5 53 e8 b1 d4 fe ff 66 90 [ +0.000002] RSP: 0018:ffffc9000018fdc8 EFLAGS: 00000246 [ +0.000002] RAX: 0000000000004000 RBX: 000000000002e5a8 RCX: 000000000000001f [ +0.000001] RDX: 0000000000000001 RSI: ffff888101298800 RDI: ffff888101298864 [ +0.000001] RBP: ffffc9000018fdd0 R08: 000000527f64bd8b R09: 000000000001dc90 [ +0.000001] R10: 000000000001dc90 R11: 0000000000000003 R12: 0000000000000001 [ +0.000001] R13: ffff888101298864 R14: ffffffff832d9e20 R15: ffff888193aa8c00 [ +0.000003] ? acpi_idle_do_entry+0x5e/0x70 [ +0.000002] acpi_idle_enter+0xd1/0x160 [ +0.000003] cpuidle_enter_state+0x9a/0x6e0 [ +0.000003] cpuidle_enter+0x2e/0x50 [ +0.000003] call_cpuidle+0x23/0x50 [ +0.000002] do_idle+0x1de/0x260 [ +0.000002] cpu_startup_entry+0x20/0x30 [ +0.000002] start_secondary+0x120/0x150 [ +0.000003] secondary_startup_64_no_verify+0xe5/0xeb [ +0.000004] </TASK> [ +0.000000] ---[ end trace 0000000000000000 ]--- [ +0.000003] BUG: kernel NULL pointer dereference, address: 0000000000000102 [ +0.006233] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring gfx_low timeout, signaled seq=3, emitted seq=4 [ +0.000734] #PF: supervisor read access in kernel mode [ +0.009670] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* Process information: process amd_deadlock pid 2002 thread amd_deadlock pid 2002 [ +0.005135] #PF: error_code(0x0000) - not-present page [ +0.000002] PGD 0 P4D 0 [ +0.000002] Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000002] CPU: 9 PID: 0 Comm: swapper/9 Tainted: G W OE 6.1.11+ #2 [ +0.000002] Hardware name: Gigabyte Technology Co., Ltd. AB350-Gaming 3/AB350-Gaming 3-CF, BIOS F7 06/16/2017 [ +0.012101] amdgpu 0000:0c:00.0: amdgpu: GPU reset begin! [ +0.005136] RIP: 0010:__queue_work+0x1f/0x4e0 [ +0.000004] Code: 87 cd 11 01 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 49 89 d5 41 54 49 89 f4 53 48 83 ec 10 89 7d d4 <f6> 86 02 01 00 00 01 0f 85 6c 03 00 00 e8 7f 36 08 00 8b 45 d4 48 For gfx_rings the schedulers may not be initialized by amdgpu_device_init_schedulers() due to ring->no_scheduler flag being set to true and thus the timeout_wq is NULL. As a result, since all ASICs call drm_sched_fault() unconditionally even for schedulers which have not been initialized, it is simpler to use the ready condition which indicates whether the given scheduler worker thread runs and whether the timeout_wq of the reset domain has been initialized. Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Cc: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20230406200054.633379-1-luben.tuikov@amd.com drm/scheduler: set entity to NULL in drm_sched_entity_pop_job() It already happend a few times that patches slipped through which implemented access to an entity through a job that was already removed from the entities queue. Since jobs and entities might have different lifecycles, this can potentially cause UAF bugs. In order to make it obvious that a jobs entity pointer shouldn't be accessed after drm_sched_entity_pop_job() was called successfully, set the jobs entity pointer to NULL once the job is removed from the entity queue. Moreover, debugging a potential NULL pointer dereference is way easier than potentially corrupted memory through a UAF. Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://lore.kernel.org/r/20230418100453.4433-1-dakr@redhat.com Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> drm/scheduler: properly forward fence errors When a hw fence is signaled with an error properly forward that to the finished fence. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230420115752.31470-1-christian.koenig@amd.com drm/scheduler: add drm_sched_entity_error and use rcu for last_scheduled Switch to using RCU handling for the last scheduled job and add a function to return the error code of it. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230420115752.31470-2-christian.koenig@amd.com drm/scheduler: mark jobs without fence as canceled When no hw fence is provided for a job that means that the job didn't executed. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230427122726.1290170-1-christian.koenig@amd.com drm/sched: Check scheduler work queue before calling timeout handling During an IGT GPU reset test we see again oops despite of commit 0c8c901aaaebc9 (drm/sched: Check scheduler ready before calling timeout handling). It uses ready condition whether to call drm_sched_fault which unwind the TDR leads to GPU reset. However it looks the ready condition is overloaded with other meanings, for example, for the following stack is related GPU reset : 0 gfx_v9_0_cp_gfx_start 1 gfx_v9_0_cp_gfx_resume 2 gfx_v9_0_cp_resume 3 gfx_v9_0_hw_init 4 gfx_v9_0_resume 5 amdgpu_device_ip_resume_phase2 does the following: /* start the ring */ gfx_v9_0_cp_gfx_start(adev); ring->sched.ready = true; The same approach is for other ASICs as well : gfx_v8_0_cp_gfx_resume gfx_v10_0_kiq_resume, etc... As a result, our GPU reset test causes GPU fault which calls unconditionally gfx_v9_0_fault and then drm_sched_fault. However now it depends on whether the interrupt service routine drm_sched_fault is executed after gfx_v9_0_cp_gfx_start is completed which sets the ready field of the scheduler to true even for uninitialized schedulers and causes oops vs no fault or when ISR drm_sched_fault is completed prior gfx_v9_0_cp_gfx_start and NULL pointer dereference does not occur. Use the field timeout_wq to prevent oops for uninitialized schedulers. The field could be initialized by the work queue of resetting the domain. v1: Corrections to commit message (Luben) Fixes: 11b3b9f461c5c4 ("drm/sched: Check scheduler ready before calling timeout handling") Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Link: https://lore.kernel.org/r/20230510135111.58631-1-vitaly.prosyak@amd.com Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> drm/sched: Remove redundant check The rq pointer points inside the drm_gpu_scheduler structure. Thus it can't be NULL. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: c61cdbdbffc1 ("drm/scheduler: Fix hang when sched_entity released") Signed-off-by: Vladislav Efanov <VEfanov@ispras.ru> Link: https://lore.kernel.org/r/20230517125247.434103-1-VEfanov@ispras.ru Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> drm/sched: Rename to drm_sched_can_queue() Rename drm_sched_ready() to drm_sched_can_queue(). "ready" can mean many things and is thus meaningless in this context. Instead, rename to a name which precisely conveys what is being checked. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Link: https://lore.kernel.org/r/20230517233550.377847-1-luben.tuikov@amd.com drm/sched: Rename to drm_sched_wakeup_if_can_queue() Rename drm_sched_wakeup() to drm_sched_wakeup_if_canqueue() since the former is misleading, as it wakes up the GPU scheduler _only if_ more jobs can be queued to the underlying hardware. This distinction is important to make, since the wake conditional in the GPU scheduler thread wakes up when other conditions are also true, e.g. when there are jobs to be cleaned. For instance, a user might want to wake up the scheduler only because there are more jobs to clean, but whether we can queue more jobs is irrelevant. v2: Separate "canqueue" to "can_queue". (Alex D.) Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20230517233550.377847-2-luben.tuikov@amd.com Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> drm/scheduler: avoid infinite loop if entity's dependency is a scheduled error fence [Why] drm_sched_entity_add_dependency_cb ignores the scheduled fence and return false. If entity's dependency is a scheduler error fence and drm_sched_stop is called due to TDR, drm_sched_entity_pop_job will wait for the dependency infinitely. [How] Do not wait or ignore the scheduled error fence, add drm_sched_entity_wakeup callback for the dependency with scheduled error fence. Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> drm/sched: Make sure we wait for all dependencies in kill_jobs_cb() drm_sched_entity_kill_jobs_cb() logic is omitting the last fence popped from the dependency array that was waited upon before drm_sched_entity_kill() was called (drm_sched_entity::dependency field), so we're basically waiting for all dependencies except one. In theory, this wait shouldn't be needed because resources should have their users registered to the dma_resv object, thus guaranteeing that future jobs wanting to access these resources wait on all the previous users (depending on the access type, of course). But we want to keep these explicit waits in the kill entity path just in case. Let's make sure we keep all dependencies in the array in drm_sched_job_dependency(), so we can iterate over the array and wait in drm_sched_entity_kill_jobs_cb(). We also make sure we wait on drm_sched_fence::finished if we were originally asked to wait on drm_sched_fence::scheduled. In that case, we assume the intent was to delegate the wait to the firmware/GPU or rely on the pipelining done at the entity/scheduler level, but when killing jobs, we really want to wait for completion not just scheduling. v2: - Don't evict deps in drm_sched_job_dependency() v3: - Always wait for drm_sched_fence::finished fences in drm_sched_entity_kill_jobs_cb() when we see a sched_fence v4: - Fix commit message - Fix a use-after-free bug v5: - Flag deps on which we should only wait for the scheduled event at insertion time v6: - Back to v4 implementation - Add Christian's R-b Cc: Frank Binns <frank.binns@imgtec.com> Cc: Sarah Walker <sarah.walker@imgtec.com> Cc: Donald Robson <donald.robson@imgtec.com> Cc: Luben Tuikov <luben.tuikov@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Suggested-by: "Christian König" <christian.koenig@amd.com> Reviewed-by: "Christian König" <christian.koenig@amd.com> Acked-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230619071921.3465992-1-boris.brezillon@collabora.com drm/sched: Call drm_sched_fence_set_parent() from drm_sched_fence_scheduled() Drivers that can delegate waits to the firmware/GPU pass the scheduled fence to drm_sched_job_add_dependency(), and issue wait commands to the firmware/GPU at job submission time. For this to be possible, they need all their 'native' dependencies to have a valid parent since this is where the actual HW fence information are encoded. In drm_sched_main(), we currently call drm_sched_fence_set_parent() after drm_sched_fence_scheduled(), leaving a short period of time during which the job depending on this fence can be submitted. Since setting parent and signaling the fence are two things that are kinda related (you can't have a parent if the job hasn't been scheduled), it probably makes sense to pass the parent fence to drm_sched_fence_scheduled() and let it call drm_sched_fence_set_parent() before it signals the scheduled fence. Here is a detailed description of the race we are fixing here: Thread A Thread B - calls drm_sched_fence_scheduled() - signals s_fence->scheduled which wakes up thread B - entity dep signaled, checking the next dep - no more deps waiting - entity is picked for job submission by drm_gpu_scheduler - run_job() is called - run_job() tries to collect native fence info from s_fence->parent, but it's NULL => BOOM, we can't do our native wait - calls drm_sched_fence_set_parent() v2: * Fix commit message v3: * Add a detailed description of the race to the commit message * Add Luben's R-b Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Cc: Frank Binns <frank.binns@imgtec.com> Cc: Sarah Walker <sarah.walker@imgtec.com> Cc: Donald Robson <donald.robson@imgtec.com> Cc: Luben Tuikov <luben.tuikov@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230623075204.382350-1-boris.brezillon@collabora.com dma-buf: add dma_fence_timestamp helper When a fence signals there is a very small race window where the timestamp isn't updated yet. sync_file solves this by busy waiting for the timestamp to appear, but on other ocassions didn't handled this correctly. Provide a dma_fence_timestamp() helper function for this and use it in all appropriate cases. Another alternative would be to grab the spinlock when that happens. v2 by teddy: add a wait parameter to wait for the timestamp to show up, in case the accurate timestamp is needed and/or the timestamp is not based on ktime (e.g. hw timestamp) v3 chk: drop the parameter again for unified handling Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: 1774baa64f93 ("drm/scheduler: Change scheduled fence track v2") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20230929104725.2358-1-christian.koenig@amd.com drm/sched: Convert the GPU scheduler to variable number of run-queues The GPU scheduler has now a variable number of run-queues, which are set up at drm_sched_init() time. This way, each driver announces how many run-queues it requires (supports) per each GPU scheduler it creates. Note, that run-queues correspond to scheduler "priorities", thus if the number of run-queues is set to 1 at drm_sched_init(), then that scheduler supports a single run-queue, i.e. single "priority". If a driver further sets a single entity per run-queue, then this creates a 1-to-1 correspondence between a scheduler and a scheduled entity. Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Qiang Yu <yuq825@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Danilo Krummrich <dakr@redhat.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Emma Anholt <emma@anholt.net> Cc: etnaviv@lists.freedesktop.org Cc: lima@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20231023032251.164775-1-luben.tuikov@amd.com drm/sched: Add drm_sched_wqueue_* helpers Add scheduler wqueue ready, stop, and start helpers to hide the implementation details of the scheduler from the drivers. v2: - s/sched_wqueue/sched_wqueue (Luben) - Remove the extra white line after the return-statement (Luben) - update drm_sched_wqueue_ready comment (Luben) Cc: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20231031032439.1558703-2-matthew.brost@intel.com Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Convert drm scheduler to use a work queue rather than kthread In Xe, the new Intel GPU driver, a choice has made to have a 1 to 1 mapping between a drm_gpu_scheduler and drm_sched_entity. At first this seems a bit odd but let us explain the reasoning below. 1. In Xe the submission order from multiple drm_sched_entity is not guaranteed to be the same completion even if targeting the same hardware engine. This is because in Xe we have a firmware scheduler, the GuC, which allowed to reorder, timeslice, and preempt submissions. If a using shared drm_gpu_scheduler across multiple drm_sched_entity, the TDR falls apart as the TDR expects submission order == completion order. Using a dedicated drm_gpu_scheduler per drm_sched_entity solve this problem. 2. In Xe submissions are done via programming a ring buffer (circular buffer), a drm_gpu_scheduler provides a limit on number of jobs, if the limit of number jobs is set to RING_SIZE / MAX_SIZE_PER_JOB we get flow control on the ring for free. A problem with this design is currently a drm_gpu_scheduler uses a kthread for submission / job cleanup. This doesn't scale if a large number of drm_gpu_scheduler are used. To work around the scaling issue, use a worker rather than kthread for submission / job cleanup. v2: - (Rob Clark) Fix msm build - Pass in run work queue v3: - (Boris) don't have loop in worker v4: - (Tvrtko) break out submit ready, stop, start helpers into own patch v5: - (Boris) default to ordered work queue v6: - (Luben / checkpatch) fix alignment in msm_ringbuffer.c - (Luben) s/drm_sched_submit_queue/drm_sched_wqueue_enqueue - (Luben) Update comment for drm_sched_wqueue_enqueue - (Luben) Positive check for submit_wq in drm_sched_init - (Luben) s/alloc_submit_wq/own_submit_wq v7: - (Luben) s/drm_sched_wqueue_enqueue/drm_sched_run_job_queue v8: - (Luben) Adjust var names / comments Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20231031032439.1558703-3-matthew.brost@intel.com Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Split free_job into own work item Rather than call free_job and run_job in same work item have a dedicated work item for each. This aligns with the design and intended use of work queues. v2: - Test for DMA_FENCE_FLAG_TIMESTAMP_BIT before setting timestamp in free_job() work item (Danilo) v3: - Drop forward dec of drm_sched_select_entity (Boris) - Return in drm_sched_run_job_work if entity NULL (Boris) v4: - Replace dequeue with peek and invert logic (Luben) - Wrap to 100 lines (Luben) - Update comments for *_queue / *_queue_if_ready functions (Luben) v5: - Drop peek argument, blindly reinit idle (Luben) - s/drm_sched_free_job_queue_if_ready/drm_sched_free_job_queue_if_done (Luben) - Update work_run_job & work_free_job kernel doc (Luben) v6: - Do not move drm_sched_select_entity in file (Luben) Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20231031032439.1558703-4-matthew.brost@intel.com Reviewed-by: Luben Tuikov <ltuikov89@gmail.com> Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Add drm_sched_start_timeout_unlocked helper Also add a lockdep assert to drm_sched_start_timeout. Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20231031032439.1558703-5-matthew.brost@intel.com Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Add a helper to queue TDR immediately Add a helper whereby a driver can invoke TDR immediately. v2: - Drop timeout args, rename function, use mod delayed work (Luben) v3: - s/XE/Xe (Luben) - present tense in commit message (Luben) - Adjust comment for drm_sched_tdr_queue_imm (Luben) v4: - Adjust commit message (Luben) Cc: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20231031032439.1558703-6-matthew.brost@intel.com Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Rename drm_sched_get_cleanup_job to be more descriptive "Get cleanup job" makes it sound like helper is returning a job which will execute some cleanup, or something, while the kerneldoc itself accurately says "fetch the next _finished_ job". So lets rename the helper to be self documenting. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Luben Tuikov <ltuikov89@gmail.com> Cc: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231102105538.391648-2-tvrtko.ursulin@linux.intel.com Reviewed-by: Luben Tuikov <ltuikov89@gmail.com> Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Move free worker re-queuing out of the if block Whether or not there are more jobs to clean up does not depend on the existance of the current job, given both drm_sched_get_finished_job and drm_sched_free_job_queue_if_done take and drop the job list lock. Therefore it is confusing to make it read like there is a dependency. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Luben Tuikov <ltuikov89@gmail.com> Cc: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231102105538.391648-3-tvrtko.ursulin@linux.intel.com Reviewed-by: Luben Tuikov <ltuikov89@gmail.com> Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Rename drm_sched_free_job_queue to be more descriptive The current name makes it sound like helper will free a queue, while what it does is it enqueues the free job worker. Rename it to drm_sched_run_free_queue to align with existing drm_sched_run_job_queue. Despite that creating an illusion there are two queues, while in reality there is only one, at least it creates a consistent naming for the two enqueuing helpers. At the same time simplify the "if done" helper by dropping the suffix and adding a double underscore prefix to the one which just enqueues. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Luben Tuikov <ltuikov89@gmail.com> Cc: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231102105538.391648-4-tvrtko.ursulin@linux.intel.com Reviewed-by: Luben Tuikov <ltuikov89@gmail.com> Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Rename drm_sched_run_job_queue_if_ready and clarify kerneldoc "If ready" is not immediately clear what it means - is the scheduler ready or something else? Drop the suffix, clarify kerneldoc, and employ the same naming scheme as in drm_sched_run_free_queue: - drm_sched_run_job_queue - enqueues if there is something to enqueue *and* scheduler is ready (can queue) - __drm_sched_run_job_queue - low-level helper to simply queue the job Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Luben Tuikov <ltuikov89@gmail.com> Cc: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231102105538.391648-5-tvrtko.ursulin@linux.intel.com Reviewed-by: Luben Tuikov <ltuikov89@gmail.com> Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Drop suffix from drm_sched_wakeup_if_can_queue Because a) helper is exported to other parts of the scheduler and b) there isn't a plain drm_sched_wakeup to begin with, I think we can drop the suffix and by doing so separate the intimiate knowledge between the scheduler components a bit better. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Luben Tuikov <ltuikov89@gmail.com> Cc: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231102105538.391648-6-tvrtko.ursulin@linux.intel.com Reviewed-by: Luben Tuikov <ltuikov89@gmail.com> Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Don't disturb the entity when in RR-mode scheduling Don't call drm_sched_select_entity() in drm_sched_run_job_queue(). In fact, rename __drm_sched_run_job_queue() to just drm_sched_run_job_queue(), and let it do just that, schedule the work item for execution. The problem is that drm_sched_run_job_queue() calls drm_sched_select_entity() to determine if the scheduler has an entity ready in one of its run-queues, and in the case of the Round-Robin (RR) scheduling, the function drm_sched_rq_select_entity_rr() does just that, selects the _next_ entity which is ready, sets up the run-queue and completion and returns that entity. The FIFO scheduling algorithm is unaffected. Now, since drm_sched_run_job_work() also calls drm_sched_select_entity(), then in the case of RR scheduling, that would result in drm_sched_select_entity() having been called twice, which may result in skipping a ready entity if more than one entity is ready. This commit fixes this by eliminating the call to drm_sched_select_entity() from drm_sched_run_job_queue(), and leaves it only in drm_sched_run_job_work(). v2: Rebased on top of Tvrtko's renames series of patches. (Luben) Add fixes-tag. (Tvrtko) Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> Fixes: f7fe64ad0f22ff ("drm/sched: Split free_job into own work item") Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231107041020.10035-2-ltuikov89@gmail.com drm/sched: Qualify drm_sched_wakeup() by drm_sched_entity_is_ready() Don't "wake up" the GPU scheduler unless the entity is ready, as well as we can queue to the scheduler, i.e. there is no point in waking up the scheduler for the entity unless the entity is ready. Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> Fixes: bc8d6a9df99038 ("drm/sched: Don't disturb the entity when in RR-mode scheduling") Reviewed-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231110000123.72565-2-ltuikov89@gmail.com drm/sched: implement dynamic job-flow control Currently, job flow control is implemented simply by limiting the number of jobs in flight. Therefore, a scheduler is initialized with a c…

commit 5207780 upstream. Since 3e135cd ("netfilter: nft_dynset: dynamic stateful expression instantiation"), it is possible to attach stateful expressions to set elements. cd5125d ("netfilter: nf_tables: split set destruction in deactivate and destroy phase") introduces conditional destruction on the object to accomodate transaction semantics. nft_expr_init() calls expr->ops->init() first, then check for NFT_STATEFUL_EXPR, this stills allows to initialize a non-stateful lookup expressions which points to a set, which might lead to UAF since the set is not properly detached from the set->binding for this case. Anyway, this combination is non-sense from nf_tables perspective. This patch fixes this problem by checking for NFT_STATEFUL_EXPR before expr->ops->init() is called. The reporter provides a KASAN splat and a poc reproducer (similar to those autogenerated by syzbot to report use-after-free errors). It is unknown to me if they are using syzbot or if they use similar automated tool to locate the bug that they are reporting. For the record, this is the KASAN splat. [ 85.431824] ================================================================== [ 85.432901] BUG: KASAN: use-after-free in nf_tables_bind_set+0x81b/0xa20 [ 85.433825] Write of size 8 at addr ffff8880286f0e98 by task poc/776 [ 85.434756] [ 85.434999] CPU: 1 PID: 776 Comm: poc Tainted: G W 5.18.0+ #2 [ 85.436023] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Fixes: 0b2d8a7 ("netfilter: nf_tables: add helper functions for expression handling") Reported-and-tested-by: Aaron Adams <edg-e@nccgroup.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d1dc877 upstream. A rare BUG_ON triggered in assoc_array_gc: [3430308.818153] kernel BUG at lib/assoc_array.c:1609! Which corresponded to the statement currently at line 1593 upstream: BUG_ON(assoc_array_ptr_is_meta(p)); Using the data from the core dump, I was able to generate a userspace reproducer[1] and determine the cause of the bug. [1]: https://github.com/brenns10/kernel_stuff/tree/master/assoc_array_gc After running the iterator on the entire branch, an internal tree node looked like the following: NODE (nr_leaves_on_branch: 3) SLOT [0] NODE (2 leaves) SLOT [1] NODE (1 leaf) SLOT [2..f] NODE (empty) In the userspace reproducer, the pr_devel output when compressing this node was: -- compress node 0x5607cc089380 -- free=0, leaves=0 [0] retain node 2/1 [nx 0] [1] fold node 1/1 [nx 0] [2] fold node 0/1 [nx 2] [3] fold node 0/2 [nx 2] [4] fold node 0/3 [nx 2] [5] fold node 0/4 [nx 2] [6] fold node 0/5 [nx 2] [7] fold node 0/6 [nx 2] [8] fold node 0/7 [nx 2] [9] fold node 0/8 [nx 2] [10] fold node 0/9 [nx 2] [11] fold node 0/10 [nx 2] [12] fold node 0/11 [nx 2] [13] fold node 0/12 [nx 2] [14] fold node 0/13 [nx 2] [15] fold node 0/14 [nx 2] after: 3 At slot 0, an internal node with 2 leaves could not be folded into the node, because there was only one available slot (slot 0). Thus, the internal node was retained. At slot 1, the node had one leaf, and was able to be folded in successfully. The remaining nodes had no leaves, and so were removed. By the end of the compression stage, there were 14 free slots, and only 3 leaf nodes. The tree was ascended and then its parent node was compressed. When this node was seen, it could not be folded, due to the internal node it contained. The invariant for compression in this function is: whenever nr_leaves_on_branch < ASSOC_ARRAY_FAN_OUT, the node should contain all leaf nodes. The compression step currently cannot guarantee this, given the corner case shown above. To fix this issue, retry compression whenever we have retained a node, and yet nr_leaves_on_branch < ASSOC_ARRAY_FAN_OUT. This second compression will then allow the node in slot 1 to be folded in, satisfying the invariant. Below is the output of the reproducer once the fix is applied: -- compress node 0x560e9c562380 -- free=0, leaves=0 [0] retain node 2/1 [nx 0] [1] fold node 1/1 [nx 0] [2] fold node 0/1 [nx 2] [3] fold node 0/2 [nx 2] [4] fold node 0/3 [nx 2] [5] fold node 0/4 [nx 2] [6] fold node 0/5 [nx 2] [7] fold node 0/6 [nx 2] [8] fold node 0/7 [nx 2] [9] fold node 0/8 [nx 2] [10] fold node 0/9 [nx 2] [11] fold node 0/10 [nx 2] [12] fold node 0/11 [nx 2] [13] fold node 0/12 [nx 2] [14] fold node 0/13 [nx 2] [15] fold node 0/14 [nx 2] internal nodes remain despite enough space, retrying -- compress node 0x560e9c562380 -- free=14, leaves=1 [0] fold node 2/15 [nx 0] after: 3 Changes ======= DH: - Use false instead of 0. - Reorder the inserted lines in a couple of places to put retained before next_slot. ver #2) - Fix typo in pr_devel, correct comparison to "<=" Fixes: 3cb9895 ("Add a generic associative array implementation.") Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Andrew Morton <akpm@linux-foundation.org> cc: keyrings@vger.kernel.org Link: https://lore.kernel.org/r/20220511225517.407935-1-stephen.s.brennan@oracle.com/ # v1 Link: https://lore.kernel.org/r/20220512215045.489140-1-stephen.s.brennan@oracle.com/ # v2 Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c42b145 ] In idtentry_vc(), vc_switch_off_ist() determines a safe stack to switch to, off of the IST stack. Annotate the new stack switch with ENCODE_FRAME_POINTER in case UNWINDER_FRAME_POINTER is used. A stack walk before looks like this: CPU: 0 PID: 0 Comm: swapper Not tainted 5.18.0-rc7+ #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl dump_stack kernel_exc_vmm_communication asm_exc_vmm_communication ? native_read_msr ? __x2apic_disable.part.0 ? x2apic_setup ? cpu_init ? trap_init ? start_kernel ? x86_64_start_reservations ? x86_64_start_kernel ? secondary_startup_64_no_verify </TASK> and with the fix, the stack dump is exact: CPU: 0 PID: 0 Comm: swapper Not tainted 5.18.0-rc7+ #3 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl dump_stack kernel_exc_vmm_communication asm_exc_vmm_communication RIP: 0010:native_read_msr Code: ... < snipped regs > ? __x2apic_disable.part.0 x2apic_setup cpu_init trap_init start_kernel x86_64_start_reservations x86_64_start_kernel secondary_startup_64_no_verify </TASK> [ bp: Test in a SEV-ES guest and rewrite the commit message to explain what exactly this does. ] Fixes: a13644f ("x86/entry/64: Add entry code for #VC handler") Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20220316041612.71357-1-jiangshanlai@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6b9dbed ] pty_write() invokes kmalloc() which may invoke a normal printk() to print failure message. This can cause a deadlock in the scenario reported by syz-bot below: CPU0 CPU1 CPU2 ---- ---- ---- lock(console_owner); lock(&port_lock_key); lock(&port->lock); lock(&port_lock_key); lock(&port->lock); lock(console_owner); As commit dbdda84 ("printk: Add console owner and waiter logic to load balance console writes") said, such deadlock can be prevented by using printk_deferred() in kmalloc() (which is invoked in the section guarded by the port->lock). But there are too many printk() on the kmalloc() path, and kmalloc() can be called from anywhere, so changing printk() to printk_deferred() is too complicated and inelegant. Therefore, this patch chooses to specify __GFP_NOWARN to kmalloc(), so that printk() will not be called, and this deadlock problem can be avoided. Syzbot reported the following lockdep error: ====================================================== WARNING: possible circular locking dependency detected 5.4.143-00237-g08ccc19a-dirty #10 Not tainted ------------------------------------------------------ syz-executor.4/29420 is trying to acquire lock: ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: console_trylock_spinning kernel/printk/printk.c:1752 [inline] ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: vprintk_emit+0x2ca/0x470 kernel/printk/printk.c:2023 but task is already holding lock: ffff8880119c9158 (&port->lock){-.-.}-{2:2}, at: pty_write+0xf4/0x1f0 drivers/tty/pty.c:120 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&port->lock){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 tty_port_tty_get drivers/tty/tty_port.c:288 [inline] <-- lock(&port->lock); tty_port_default_wakeup+0x1d/0xb0 drivers/tty/tty_port.c:47 serial8250_tx_chars+0x530/0xa80 drivers/tty/serial/8250/8250_port.c:1767 serial8250_handle_irq.part.0+0x31f/0x3d0 drivers/tty/serial/8250/8250_port.c:1854 serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1827 [inline] <-- lock(&port_lock_key); serial8250_default_handle_irq+0xb2/0x220 drivers/tty/serial/8250/8250_port.c:1870 serial8250_interrupt+0xfd/0x200 drivers/tty/serial/8250/8250_core.c:126 __handle_irq_event_percpu+0x109/0xa50 kernel/irq/handle.c:156 [...] -> #1 (&port_lock_key){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 serial8250_console_write+0x184/0xa40 drivers/tty/serial/8250/8250_port.c:3198 <-- lock(&port_lock_key); call_console_drivers kernel/printk/printk.c:1819 [inline] console_unlock+0x8cb/0xd00 kernel/printk/printk.c:2504 vprintk_emit+0x1b5/0x470 kernel/printk/printk.c:2024 <-- lock(console_owner); vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394 printk+0xba/0xed kernel/printk/printk.c:2084 register_console+0x8b3/0xc10 kernel/printk/printk.c:2829 univ8250_console_init+0x3a/0x46 drivers/tty/serial/8250/8250_core.c:681 console_init+0x49d/0x6d3 kernel/printk/printk.c:2915 start_kernel+0x5e9/0x879 init/main.c:713 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 -> #0 (console_owner){....}-{0:0}: [...] lock_acquire+0x127/0x340 kernel/locking/lockdep.c:4734 console_trylock_spinning kernel/printk/printk.c:1773 [inline] <-- lock(console_owner); vprintk_emit+0x307/0x470 kernel/printk/printk.c:2023 vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394 printk+0xba/0xed kernel/printk/printk.c:2084 fail_dump lib/fault-inject.c:45 [inline] should_fail+0x67b/0x7c0 lib/fault-inject.c:144 __should_failslab+0x152/0x1c0 mm/failslab.c:33 should_failslab+0x5/0x10 mm/slab_common.c:1224 slab_pre_alloc_hook mm/slab.h:468 [inline] slab_alloc_node mm/slub.c:2723 [inline] slab_alloc mm/slub.c:2807 [inline] __kmalloc+0x72/0x300 mm/slub.c:3871 kmalloc include/linux/slab.h:582 [inline] tty_buffer_alloc+0x23f/0x2a0 drivers/tty/tty_buffer.c:175 __tty_buffer_request_room+0x156/0x2a0 drivers/tty/tty_buffer.c:273 tty_insert_flip_string_fixed_flag+0x93/0x250 drivers/tty/tty_buffer.c:318 tty_insert_flip_string include/linux/tty_flip.h:37 [inline] pty_write+0x126/0x1f0 drivers/tty/pty.c:122 <-- lock(&port->lock); n_tty_write+0xa7a/0xfc0 drivers/tty/n_tty.c:2356 do_tty_write drivers/tty/tty_io.c:961 [inline] tty_write+0x512/0x930 drivers/tty/tty_io.c:1045 __vfs_write+0x76/0x100 fs/read_write.c:494 [...] other info that might help us debug this: Chain exists of: console_owner --> &port_lock_key --> &port->lock Link: https://lkml.kernel.org/r/20220511061951.1114-2-zhengqi.arch@bytedance.com Link: https://lkml.kernel.org/r/20220510113809.80626-2-zhengqi.arch@bytedance.com Fixes: b6da31b ("tty: Fix data race in tty_insert_flip_string_fixed_flag") Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Acked-by: Jiri Slaby <jirislaby@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 6213f5d upstream. Let's avoid false-alarmed lockdep warning. [ 58.914674] [T1501146] -> #2 (&sb->s_type->i_mutex_key#20){+.+.}-{3:3}: [ 58.915975] [T1501146] system_server: down_write+0x7c/0xe0 [ 58.916738] [T1501146] system_server: f2fs_quota_sync+0x60/0x1a8 [ 58.917563] [T1501146] system_server: block_operations+0x16c/0x43c [ 58.918410] [T1501146] system_server: f2fs_write_checkpoint+0x114/0x318 [ 58.919312] [T1501146] system_server: f2fs_issue_checkpoint+0x178/0x21c [ 58.920214] [T1501146] system_server: f2fs_sync_fs+0x48/0x6c [ 58.920999] [T1501146] system_server: f2fs_do_sync_file+0x334/0x738 [ 58.921862] [T1501146] system_server: f2fs_sync_file+0x30/0x48 [ 58.922667] [T1501146] system_server: __arm64_sys_fsync+0x84/0xf8 [ 58.923506] [T1501146] system_server: el0_svc_common.llvm.12821150825140585682+0xd8/0x20c [ 58.924604] [T1501146] system_server: do_el0_svc+0x28/0xa0 [ 58.925366] [T1501146] system_server: el0_svc+0x24/0x38 [ 58.926094] [T1501146] system_server: el0_sync_handler+0x88/0xec [ 58.926920] [T1501146] system_server: el0_sync+0x1b4/0x1c0 [ 58.927681] [T1501146] -> #1 (&sbi->cp_global_sem){+.+.}-{3:3}: [ 58.928889] [T1501146] system_server: down_write+0x7c/0xe0 [ 58.929650] [T1501146] system_server: f2fs_write_checkpoint+0xbc/0x318 [ 58.930541] [T1501146] system_server: f2fs_issue_checkpoint+0x178/0x21c [ 58.931443] [T1501146] system_server: f2fs_sync_fs+0x48/0x6c [ 58.932226] [T1501146] system_server: sync_filesystem+0xac/0x130 [ 58.933053] [T1501146] system_server: generic_shutdown_super+0x38/0x150 [ 58.933958] [T1501146] system_server: kill_block_super+0x24/0x58 [ 58.934791] [T1501146] system_server: kill_f2fs_super+0xcc/0x124 [ 58.935618] [T1501146] system_server: deactivate_locked_super+0x90/0x120 [ 58.936529] [T1501146] system_server: deactivate_super+0x74/0xac [ 58.937356] [T1501146] system_server: cleanup_mnt+0x128/0x168 [ 58.938150] [T1501146] system_server: __cleanup_mnt+0x18/0x28 [ 58.938944] [T1501146] system_server: task_work_run+0xb8/0x14c [ 58.939749] [T1501146] system_server: do_notify_resume+0x114/0x1e8 [ 58.940595] [T1501146] system_server: work_pending+0xc/0x5f0 [ 58.941375] [T1501146] -> #0 (&sbi->gc_lock){+.+.}-{3:3}: [ 58.942519] [T1501146] system_server: __lock_acquire+0x1270/0x2868 [ 58.943366] [T1501146] system_server: lock_acquire+0x114/0x294 [ 58.944169] [T1501146] system_server: down_write+0x7c/0xe0 [ 58.944930] [T1501146] system_server: f2fs_issue_checkpoint+0x13c/0x21c [ 58.945831] [T1501146] system_server: f2fs_sync_fs+0x48/0x6c [ 58.946614] [T1501146] system_server: f2fs_do_sync_file+0x334/0x738 [ 58.947472] [T1501146] system_server: f2fs_ioc_commit_atomic_write+0xc8/0x14c [ 58.948439] [T1501146] system_server: __f2fs_ioctl+0x674/0x154c [ 58.949253] [T1501146] system_server: f2fs_ioctl+0x54/0x88 [ 58.950018] [T1501146] system_server: __arm64_sys_ioctl+0xa8/0x110 [ 58.950865] [T1501146] system_server: el0_svc_common.llvm.12821150825140585682+0xd8/0x20c [ 58.951965] [T1501146] system_server: do_el0_svc+0x28/0xa0 [ 58.952727] [T1501146] system_server: el0_svc+0x24/0x38 [ 58.953454] [T1501146] system_server: el0_sync_handler+0x88/0xec [ 58.954279] [T1501146] system_server: el0_sync+0x1b4/0x1c0 Cc: stable@vger.kernel.org Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 863e0d8 upstream. When user_dlm_destroy_lock failed, it didn't clean up the flags it set before exit. For USER_LOCK_IN_TEARDOWN, if this function fails because of lock is still in used, next time when unlink invokes this function, it will return succeed, and then unlink will remove inode and dentry if lock is not in used(file closed), but the dlm lock is still linked in dlm lock resource, then when bast come in, it will trigger a panic due to user-after-free. See the following panic call trace. To fix this, USER_LOCK_IN_TEARDOWN should be reverted if fail. And also error should be returned if USER_LOCK_IN_TEARDOWN is set to let user know that unlink fail. For the case of ocfs2_dlm_unlock failure, besides USER_LOCK_IN_TEARDOWN, USER_LOCK_BUSY is also required to be cleared. Even though spin lock is released in between, but USER_LOCK_IN_TEARDOWN is still set, for USER_LOCK_BUSY, if before every place that waits on this flag, USER_LOCK_IN_TEARDOWN is checked to bail out, that will make sure no flow waits on the busy flag set by user_dlm_destroy_lock(), then we can simplely revert USER_LOCK_BUSY when ocfs2_dlm_unlock fails. Fix user_dlm_cluster_lock() which is the only function not following this. [ 941.336392] (python,26174,16):dlmfs_unlink:562 ERROR: unlink 004fb0000060000b5a90b8c847b72e1, error -16 from destroy [ 989.757536] ------------[ cut here ]------------ [ 989.757709] kernel BUG at fs/ocfs2/dlmfs/userdlm.c:173! [ 989.757876] invalid opcode: 0000 [#1] SMP [ 989.758027] Modules linked in: ksplice_2zhuk2jr_ib_ipoib_new(O) ksplice_2zhuk2jr(O) mptctl mptbase xen_netback xen_blkback xen_gntalloc xen_gntdev xen_evtchn cdc_ether usbnet mii ocfs2 jbd2 rpcsec_gss_krb5 auth_rpcgss nfsv4 nfsv3 nfs_acl nfs fscache lockd grace ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs bnx2fc fcoe libfcoe libfc scsi_transport_fc sunrpc ipmi_devintf bridge stp llc rds_rdma rds bonding ib_sdp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm falcon_lsm_serviceable(PE) falcon_nf_netcontain(PE) mlx4_vnic falcon_kal(E) falcon_lsm_pinned_13402(E) mlx4_ib ib_sa ib_mad ib_core ib_addr xenfs xen_privcmd dm_multipath iTCO_wdt iTCO_vendor_support pcspkr sb_edac edac_core i2c_i801 lpc_ich mfd_core ipmi_ssif i2c_core ipmi_si ipmi_msghandler [ 989.760686] ioatdma sg ext3 jbd mbcache sd_mod ahci libahci ixgbe dca ptp pps_core vxlan udp_tunnel ip6_udp_tunnel megaraid_sas mlx4_core crc32c_intel be2iscsi bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi ipv6 cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ksplice_2zhuk2jr_ib_ipoib_old] [ 989.761987] CPU: 10 PID: 19102 Comm: dlm_thread Tainted: P OE 4.1.12-124.57.1.el6uek.x86_64 #2 [ 989.762290] Hardware name: Oracle Corporation ORACLE SERVER X5-2/ASM,MOTHERBOARD,1U, BIOS 30350100 06/17/2021 [ 989.762599] task: ffff880178af6200 ti: ffff88017f7c8000 task.ti: ffff88017f7c8000 [ 989.762848] RIP: e030:[<ffffffffc07d4316>] [<ffffffffc07d4316>] __user_dlm_queue_lockres.part.4+0x76/0x80 [ocfs2_dlmfs] [ 989.763185] RSP: e02b:ffff88017f7cbcb8 EFLAGS: 00010246 [ 989.763353] RAX: 0000000000000000 RBX: ffff880174d48008 RCX: 0000000000000003 [ 989.763565] RDX: 0000000000120012 RSI: 0000000000000003 RDI: ffff880174d48170 [ 989.763778] RBP: ffff88017f7cbcc8 R08: ffff88021f4293b0 R09: 0000000000000000 [ 989.763991] R10: ffff880179c8c000 R11: 0000000000000003 R12: ffff880174d48008 [ 989.764204] R13: 0000000000000003 R14: ffff880179c8c000 R15: ffff88021db7a000 [ 989.764422] FS: 0000000000000000(0000) GS:ffff880247480000(0000) knlGS:ffff880247480000 [ 989.764685] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 989.764865] CR2: ffff8000007f6800 CR3: 0000000001ae0000 CR4: 0000000000042660 [ 989.765081] Stack: [ 989.765167] 0000000000000003 ffff880174d48040 ffff88017f7cbd18 ffffffffc07d455f [ 989.765442] ffff88017f7cbd88 ffffffff816fb639 ffff88017f7cbd38 ffff8800361b5600 [ 989.765717] ffff88021db7a000 ffff88021f429380 0000000000000003 ffffffffc0453020 [ 989.765991] Call Trace: [ 989.766093] [<ffffffffc07d455f>] user_bast+0x5f/0xf0 [ocfs2_dlmfs] [ 989.766287] [<ffffffff816fb639>] ? schedule_timeout+0x169/0x2d0 [ 989.766475] [<ffffffffc0453020>] ? o2dlm_lock_ast_wrapper+0x20/0x20 [ocfs2_stack_o2cb] [ 989.766738] [<ffffffffc045303a>] o2dlm_blocking_ast_wrapper+0x1a/0x20 [ocfs2_stack_o2cb] [ 989.767010] [<ffffffffc0864ec6>] dlm_do_local_bast+0x46/0xe0 [ocfs2_dlm] [ 989.767217] [<ffffffffc084f5cc>] ? dlm_lockres_calc_usage+0x4c/0x60 [ocfs2_dlm] [ 989.767466] [<ffffffffc08501f1>] dlm_thread+0xa31/0x1140 [ocfs2_dlm] [ 989.767662] [<ffffffff816f78da>] ? __schedule+0x24a/0x810 [ 989.767834] [<ffffffff816f78ce>] ? __schedule+0x23e/0x810 [ 989.768006] [<ffffffff816f78da>] ? __schedule+0x24a/0x810 [ 989.768178] [<ffffffff816f78ce>] ? __schedule+0x23e/0x810 [ 989.768349] [<ffffffff816f78da>] ? __schedule+0x24a/0x810 [ 989.768521] [<ffffffff816f78ce>] ? __schedule+0x23e/0x810 [ 989.768693] [<ffffffff816f78da>] ? __schedule+0x24a/0x810 [ 989.768893] [<ffffffff816f78ce>] ? __schedule+0x23e/0x810 [ 989.769067] [<ffffffff816f78da>] ? __schedule+0x24a/0x810 [ 989.769241] [<ffffffff810ce4d0>] ? wait_woken+0x90/0x90 [ 989.769411] [<ffffffffc084f7c0>] ? dlm_kick_thread+0x80/0x80 [ocfs2_dlm] [ 989.769617] [<ffffffff810a8bbb>] kthread+0xcb/0xf0 [ 989.769774] [<ffffffff816f78da>] ? __schedule+0x24a/0x810 [ 989.769945] [<ffffffff816f78da>] ? __schedule+0x24a/0x810 [ 989.770117] [<ffffffff810a8af0>] ? kthread_create_on_node+0x180/0x180 [ 989.770321] [<ffffffff816fdaa1>] ret_from_fork+0x61/0x90 [ 989.770492] [<ffffffff810a8af0>] ? kthread_create_on_node+0x180/0x180 [ 989.770689] Code: d0 00 00 00 f0 45 7d c0 bf 00 20 00 00 48 89 83 c0 00 00 00 48 89 83 c8 00 00 00 e8 55 c1 8c c0 83 4b 04 10 48 83 c4 08 5b 5d c3 <0f> 0b 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 83 [ 989.771892] RIP [<ffffffffc07d4316>] __user_dlm_queue_lockres.part.4+0x76/0x80 [ocfs2_dlmfs] [ 989.772174] RSP <ffff88017f7cbcb8> [ 989.772704] ---[ end trace ebd1e38cebcc93a8 ]--- [ 989.772907] Kernel panic - not syncing: Fatal exception [ 989.773173] Kernel Offset: disabled Link: https://lkml.kernel.org/r/20220518235224.87100-2-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7d54c15 upstream. We see the following GPF when register_ftrace_direct fails: [ ] general protection fault, probably for non-canonical address \ 0x200000000000010: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [...] [ ] RIP: 0010:ftrace_find_rec_direct+0x53/0x70 [ ] Code: 48 c1 e0 03 48 03 42 08 48 8b 10 31 c0 48 85 d2 74 [...] [ ] RSP: 0018:ffffc9000138bc10 EFLAGS: 00010206 [ ] RAX: 0000000000000000 RBX: ffffffff813e0df0 RCX: 000000000000003b [ ] RDX: 0200000000000000 RSI: 000000000000000c RDI: ffffffff813e0df0 [ ] RBP: ffffffffa00a3000 R08: ffffffff81180ce0 R09: 0000000000000001 [ ] R10: ffffc9000138bc18 R11: 0000000000000001 R12: ffffffff813e0df0 [ ] R13: ffffffff813e0df0 R14: ffff888171b56400 R15: 0000000000000000 [ ] FS: 00007fa9420c7780(0000) GS:ffff888ff6a00000(0000) knlGS:000000000 [ ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ ] CR2: 000000000770d000 CR3: 0000000107d50003 CR4: 0000000000370ee0 [ ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ ] Call Trace: [ ] <TASK> [ ] register_ftrace_direct+0x54/0x290 [ ] ? render_sigset_t+0xa0/0xa0 [ ] bpf_trampoline_update+0x3f5/0x4a0 [ ] ? 0xffffffffa00a3000 [ ] bpf_trampoline_link_prog+0xa9/0x140 [ ] bpf_tracing_prog_attach+0x1dc/0x450 [ ] bpf_raw_tracepoint_open+0x9a/0x1e0 [ ] ? find_held_lock+0x2d/0x90 [ ] ? lock_release+0x150/0x430 [ ] __sys_bpf+0xbd6/0x2700 [ ] ? lock_is_held_type+0xd8/0x130 [ ] __x64_sys_bpf+0x1c/0x20 [ ] do_syscall_64+0x3a/0x80 [ ] entry_SYSCALL_64_after_hwframe+0x44/0xae [ ] RIP: 0033:0x7fa9421defa9 [ ] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 9 f8 [...] [ ] RSP: 002b:00007ffed743bd78 EFLAGS: 00000246 ORIG_RAX: 0000000000000141 [ ] RAX: ffffffffffffffda RBX: 00000000069d2480 RCX: 00007fa9421defa9 [ ] RDX: 0000000000000078 RSI: 00007ffed743bd80 RDI: 0000000000000011 [ ] RBP: 00007ffed743be00 R08: 0000000000bb7270 R09: 0000000000000000 [ ] R10: 00000000069da210 R11: 0000000000000246 R12: 0000000000000001 [ ] R13: 00007ffed743c4b0 R14: 00000000069d2480 R15: 0000000000000001 [ ] </TASK> [ ] Modules linked in: klp_vm(OK) [ ] ---[ end trace 0000000000000000 ]--- One way to trigger this is: 1. load a livepatch that patches kernel function xxx; 2. run bpftrace -e 'kfunc:xxx {}', this will fail (expected for now); 3. repeat #2 => gpf. This is because the entry is added to direct_functions, but not removed. Fix this by remove the entry from direct_functions when register_ftrace_direct fails. Also remove the last trailing space from ftrace.c, so we don't have to worry about it anymore. Link: https://lkml.kernel.org/r/20220524170839.900849-1-song@kernel.org Cc: stable@vger.kernel.org Fixes: 763e34e ("ftrace: Add register_ftrace_direct()") Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When using rockchip mpp I meet the folowing kernel crash. Diabling DMA-BUF debug checks solves the issue. Unable to handle kernel paging request at virtual address ffffffffa42fc000 Mem abort info: ESR = 0x0000000096000145 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000145 CM = 1, WnR = 1 swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000001cfb000 [ffffffffa42fc000] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000145 [#2] SMP Modules linked in: CPU: 7 PID: 2081 Comm: mppvideodec0:sr Tainted: G D 6.1.43-6-rockchip-g32498cfaff7c #1 Hardware name: Radxa ROCK 5B (DT) pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : dcache_inval_poc+0x40/0x58 lr : arch_sync_dma_for_cpu+0x30/0x3c sp : ffffffc00ba83c90 x29: ffffffc00ba83c90 x28: ffffff8002fa1e80 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000014 x23: 0000007f8e04e1f0 x22: 0000000000000001 x21: 0000000000000002 x20: 000000000000001e x19: ffffff8004b84c00 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000007f8e04e1f0 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffffc00871b6c4 x8 : 0000000000000001 x7 : ffffff8003e2fd38 x6 : ffffffc00ba83d88 x5 : ffffffc00ba83d88 x4 : ffffffc00871b660 x3 : 000000000000003f x2 : 0000000000000040 x1 : ffffffffa43fc000 x0 : ffffffffa42fc000 Call trace: dcache_inval_poc+0x40/0x58 iommu_dma_sync_sg_for_cpu+0x64/0xbc dma_sync_sg_for_cpu+0x40/0x44 system_heap_dma_buf_begin_cpu_access+0x7c/0x84 dma_buf_begin_cpu_access+0x3c/0x70 dma_buf_ioctl+0x12c/0x2fc vfs_ioctl+0x2c/0x48 __arm64_sys_ioctl+0x7c/0xac invoke_syscall+0x80/0x10c el0_svc_common.constprop.0+0xc8/0x118 do_el0_svc+0x20/0x28 el0_svc+0x14/0x3c el0t_64_sync_handler+0x90/0xf8 el0t_64_sync+0x158/0x15c Signed-off-by: Stephen Chen <stephen@radxa.com>

Arm has introduced a new v10 GPU architecture that replaces the Job Manager interface with a new Command Stream Frontend. It adds firmware driven command stream queues that can be used by kernel and user space to submit jobs to the GPU. Add the initial schema for the device tree that is based on support for RK3588 SoC. The minimum number of clocks is one for the IP, but on Rockchip platforms they will tend to expose the semi-independent clocks for better power management. v5: - Move the opp-table node under the gpu node v4: - Fix formatting issue v3: - Cleanup commit message to remove redundant text - Added opp-table property and re-ordered entries - Clarified power-domains and power-domain-names requirements for RK3588. - Cleaned up example Note: power-domains and power-domain-names requirements for other platforms are still work in progress, hence the bindings are left incomplete here. v2: - New commit Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Conor Dooley <conor+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Rob Herring <robh@kernel.org> drm: execution context for GEM buffers v7 This adds the infrastructure for an execution context for GEM buffers which is similar to the existing TTMs execbuf util and intended to replace it in the long term. The basic functionality is that we abstracts the necessary loop to lock many different GEM buffers with automated deadlock and duplicate handling. v2: drop xarray and use dynamic resized array instead, the locking overhead is unnecessary and measurable. v3: drop duplicate tracking, radeon is really the only one needing that. v4: fixes issues pointed out by Danilo, some typos in comments and a helper for lock arrays of GEM objects. v5: some suggestions by Boris Brezillon, especially just use one retry macro, drop loop in prepare_array, use flags instead of bool v6: minor changes suggested by Thomas, Boris and Danilo v7: minor typos pointed out by checkpatch.pl fixed Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Danilo Krummrich <dakr@redhat.com> Tested-by: Danilo Krummrich <dakr@redhat.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230711133122.3710-2-christian.koenig@amd.com drm: manager to keep track of GPUs VA mappings Add infrastructure to keep track of GPU virtual address (VA) mappings with a decicated VA space manager implementation. New UAPIs, motivated by Vulkan sparse memory bindings graphics drivers start implementing, allow userspace applications to request multiple and arbitrary GPU VA mappings of buffer objects. The DRM GPU VA manager is intended to serve the following purposes in this context. 1) Provide infrastructure to track GPU VA allocations and mappings, using an interval tree (RB-tree). 2) Generically connect GPU VA mappings to their backing buffers, in particular DRM GEM objects. 3) Provide a common implementation to perform more complex mapping operations on the GPU VA space. In particular splitting and merging of GPU VA mappings, e.g. for intersecting mapping requests or partial unmap requests. Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Acked-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Tested-by: Matthew Brost <matthew.brost@intel.com> Tested-by: Donald Robson <donald.robson@imgtec.com> Suggested-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230720001443.2380-2-dakr@redhat.com drm: manager: Fix printk format for size_t sizeof() returns a size_t which may be different to an unsigned long. Use the correct format specifier of '%zu' to prevent compiler warnings. Fixes: e6303f323b1a ("drm: manager to keep track of GPUs VA mappings") Reviewed-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/2bf64010-c40a-8b84-144c-5387412b579e@arm.com drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map() The prev pointer in __drm_gpuva_sm_map() was used to implement automatic merging of mappings. Since automatic merging did not make its way upstream, remove this leftover. Fixes: e6303f323b1a ("drm: manager to keep track of GPUs VA mappings") Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230823233119.2891-1-dakr@redhat.com drm/gpuvm: rename struct drm_gpuva_manager to struct drm_gpuvm Rename struct drm_gpuva_manager to struct drm_gpuvm including corresponding functions. This way the GPUVA manager's structures align very well with the documentation of VM_BIND [1] and VM_BIND locking [2]. It also provides a better foundation for the naming of data structures and functions introduced for implementing a common dma-resv per GPU-VM including tracking of external and evicted objects in subsequent patches. [1] Documentation/gpu/drm-vm-bind-async.rst [2] Documentation/gpu/drm-vm-bind-locking.rst Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Acked-by: Dave Airlie <airlied@redhat.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230920144343.64830-2-dakr@redhat.com drm/gpuvm: allow building as module HB: drivers/gpu/drm/nouveau/Kconfig skipped because there is no gpuvm support of nouveau in 6.1 Currently, the DRM GPUVM does not have any core dependencies preventing a module build. Also, new features from subsequent patches require helpers (namely drm_exec) which can be built as module. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230920144343.64830-3-dakr@redhat.com drm/gpuvm: convert WARN() to drm_WARN() variants HB: drivers/gpu/drm/nouveau/nouveau_uvmm.c skipped since 6.1 does not support gpuvm on nv Use drm_WARN() and drm_WARN_ON() variants to indicate drivers the context the failing VM resides in. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-2-dakr@redhat.com drm/gpuvm: don't always WARN in drm_gpuvm_check_overflow() Don't always WARN in drm_gpuvm_check_overflow() and separate it into a drm_gpuvm_check_overflow() and a dedicated drm_gpuvm_warn_check_overflow() variant. This avoids printing warnings due to invalid userspace requests. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-3-dakr@redhat.com drm/gpuvm: export drm_gpuvm_range_valid() Drivers may use this function to validate userspace requests in advance, hence export it. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-4-dakr@redhat.com drm/gpuvm: add common dma-resv per struct drm_gpuvm hb: drivers/gpu/drm/nouveau/nouveau_uvmm.c skipped Provide a common dma-resv for GEM objects not being used outside of this GPU-VM. This is used in a subsequent patch to generalize dma-resv, external and evicted object handling and GEM validation. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-6-dakr@redhat.com drm/gpuvm: add drm_gpuvm_flags to drm_gpuvm HB: drivers/gpu/drm/nouveau/nouveau_uvmm.c skipped Introduce flags for struct drm_gpuvm, this required by subsequent commits. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-8-dakr@redhat.com drm/gpuvm: reference count drm_gpuvm structures HB: drivers/gpu/drm/nouveau/nouveau_uvmm.c skipped Implement reference counting for struct drm_gpuvm. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-10-dakr@redhat.com drm/gpuvm: add an abstraction for a VM / BO combination HB: drivers/gpu/drm/nouveau/nouveau_uvmm.c skipped Add an abstraction layer between the drm_gpuva mappings of a particular drm_gem_object and this GEM object itself. The abstraction represents a combination of a drm_gem_object and drm_gpuvm. The drm_gem_object holds a list of drm_gpuvm_bo structures (the structure representing this abstraction), while each drm_gpuvm_bo contains list of mappings of this GEM object. This has multiple advantages: 1) We can use the drm_gpuvm_bo structure to attach it to various lists of the drm_gpuvm. This is useful for tracking external and evicted objects per VM, which is introduced in subsequent patches. 2) Finding mappings of a certain drm_gem_object mapped in a certain drm_gpuvm becomes much cheaper. 3) Drivers can derive and extend the structure to easily represent driver specific states of a BO for a certain GPUVM. The idea of this abstraction was taken from amdgpu, hence the credit for this idea goes to the developers of amdgpu. Cc: Christian König <christian.koenig@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-11-dakr@redhat.com drm/gpuvm: track/lock/validate external/evicted objects Currently the DRM GPUVM offers common infrastructure to track GPU VA allocations and mappings, generically connect GPU VA mappings to their backing buffers and perform more complex mapping operations on the GPU VA space. However, there are more design patterns commonly used by drivers, which can potentially be generalized in order to make the DRM GPUVM represent a basis for GPU-VM implementations. In this context, this patch aims at generalizing the following elements. 1) Provide a common dma-resv for GEM objects not being used outside of this GPU-VM. 2) Provide tracking of external GEM objects (GEM objects which are shared with other GPU-VMs). 3) Provide functions to efficiently lock all GEM objects dma-resv the GPU-VM contains mappings of. 4) Provide tracking of evicted GEM objects the GPU-VM contains mappings of, such that validation of evicted GEM objects is accelerated. 5) Provide some convinience functions for common patterns. Big thanks to Boris Brezillon for his help to figure out locking for drivers updating the GPU VA space within the fence signalling path. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Suggested-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-12-dakr@redhat.com drm/gpuvm: fall back to drm_exec_lock_obj() Fall back to drm_exec_lock_obj() if num_fences is zero for the drm_gpuvm_prepare_* function family. Otherwise dma_resv_reserve_fences() would actually allocate slots even though num_fences is zero. Cc: Christian König <christian.koenig@amd.com> Acked-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231129220835.297885-2-dakr@redhat.com drm/gpuvm: Let drm_gpuvm_bo_put() report when the vm_bo object is destroyed Some users need to release resources attached to the vm_bo object when it's destroyed. In Panthor's case, we need to release the pin ref so BO pages can be returned to the system when all GPU mappings are gone. This could be done through a custom drm_gpuvm::vm_bo_free() hook, but this has all sort of locking implications that would force us to expose a drm_gem_shmem_unpin_locked() helper, not to mention the fact that having a ::vm_bo_free() implementation without a ::vm_bo_alloc() one seems odd. So let's keep things simple, and extend drm_gpuvm_bo_put() to report when the object is destroyed. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231204151406.1977285-1-boris.brezillon@collabora.com drm/exec: Pass in initial # of objects HB: skipped drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c drivers/gpu/drm/amd/amdgpu/amdgpu_csa.c drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c drivers/gpu/drm/amd/amdgpu/amdgpu_umsch_mm.c drivers/gpu/drm/amd/amdkfd/kfd_svm.c drivers/gpu/drm/imagination/pvr_job.c drivers/gpu/drm/nouveau/nouveau_uvmm.c In cases where the # is known ahead of time, it is silly to do the table resize dance. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Christian König <christian.koenig@amd.com> Patchwork: https://patchwork.freedesktop.org/patch/568338/ drm/gem-shmem: When drm_gem_object_init failed, should release object when goto err_free, the object had init, so it should be release when fail. Signed-off-by: ChunyouTang <tangchunyou@163.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20221119064131.364-1-tangchunyou@163.com drm: Remove usage of deprecated DRM_DEBUG_PRIME drm_print.h says DRM_DEBUG_PRIME is deprecated in favor of drm_dbg_prime(). Signed-off-by: Siddh Raman Pant <code@siddh.me> Reviewed-by: Simon Ser <contact@emersion.fr> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/cd663b1bc42189e55898cddecdb3b73c591b341a.1673269059.git.code@siddh.me drm/shmem: Cleanup drm_gem_shmem_create_with_handle() Once we create the handle, the handle owns the reference. Currently nothing was doing anything with the shmem ptr after the handle was created, but let's change drm_gem_shmem_create_with_handle() to not return the pointer, so-as to not encourage problematic use of this function in the future. As a bonus, it makes the code a bit cleaner. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230123154831.3191821-1-robdclark@gmail.com drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt() Other functions touching shmem->sgt take the pages lock, so do that here too. drm_gem_shmem_get_pages() & co take the same lock, so move to the _locked() variants to avoid recursive locking. Discovered while auditing locking to write the Rust abstractions. Fixes: 2194a63a818d ("drm: Add library for shmem backed GEM objects") Fixes: 4fa3d66f132b ("drm/shmem: Do dma_unmap_sg before purging pages") Signed-off-by: Asahi Lina <lina@asahilina.net> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230205125124.2260-1-lina@asahilina.net drm/shmem-helper: Switch to use drm_* debug helpers Ease debugging of a multi-GPU system by using drm_WARN_*() and drm_dbg_kms() helpers that print out DRM device name corresponding to shmem GEM. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Suggested-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/all/20230108210445.3948344-6-dmitry.osipenko@collabora.com/ drm/shmem-helper: Don't use vmap_use_count for dma-bufs DMA-buf core has its own refcounting of vmaps, use it instead of drm-shmem counting. This change prepares drm-shmem for addition of memory shrinker support where drm-shmem will use a single dma-buf reservation lock for all operations performed over dma-bufs. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/all/20230108210445.3948344-7-dmitry.osipenko@collabora.com/ drm/shmem-helper: Switch to reservation lock Replace all drm-shmem locks with a GEM reservation lock. This makes locks consistent with dma-buf locking convention where importers are responsible for holding reservation lock for all operations performed over dma-bufs, preventing deadlock between dma-buf importers and exporters. Suggested-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/all/20230108210445.3948344-8-dmitry.osipenko@collabora.com/ drm/shmem-helper: Revert accidental non-GPL export The referenced commit added a wrapper for drm_gem_shmem_get_pages_sgt(), but in the process it accidentally changed the export type from GPL to non-GPL. Switch it back to GPL. Reported-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Fixes: ddddedaa0db9 ("drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()") Signed-off-by: Asahi Lina <lina@asahilina.net> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230227-shmem-export-fix-v1-1-8880b2c25e81@asahilina.net Revert "drm/shmem-helper: Switch to reservation lock" This reverts commit 67b7836d4458790f1261e31fe0ce3250989784f0. The locking appears incomplete. A caller of SHMEM helper's pin function never acquires the dma-buf reservation lock. So we get WARNING: CPU: 3 PID: 967 at drivers/gpu/drm/drm_gem_shmem_helper.c:243 drm_gem_shmem_pin+0x42/0x90 [drm_shmem_helper] Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230228152612.19971-1-tzimmermann@suse.de drm/shmem-helper: Switch to reservation lock Replace all drm-shmem locks with a GEM reservation lock. This makes locks consistent with dma-buf locking convention where importers are responsible for holding reservation lock for all operations performed over dma-bufs, preventing deadlock between dma-buf importers and exporters. Suggested-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-7-dmitry.osipenko@collabora.com drm/shmem-helper: Reset vma->vm_ops before calling dma_buf_mmap() The dma-buf backend is supposed to provide its own vm_ops, but some implementation just have nothing special to do and leave vm_ops untouched, probably expecting this field to be zero initialized (this is the case with the system_heap implementation for instance). Let's reset vma->vm_ops to NULL to keep things working with these implementations. Fixes: 26d3ac3cb04d ("drm/shmem-helpers: Redirect mmap for imported dma-buf") Cc: <stable@vger.kernel.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reported-by: Roman Stratiienko <r.stratiienko@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Tested-by: Roman Stratiienko <r.stratiienko@gmail.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230724112610.60974-1-boris.brezillon@collabora.com iommu: Allow passing custom allocators to pgtable drivers This will be useful for GPU drivers who want to keep page tables in a pool so they can: - keep freed page tables in a free pool and speed-up upcoming page table allocations - batch page table allocation instead of allocating one page at a time - pre-reserve pages for page tables needed for map/unmap operations, to ensure map/unmap operations don't try to allocate memory in paths they're allowed to block or fail It might also be valuable for other aspects of GPU and similar use-cases, like fine-grained memory accounting and resource limiting. We will extend the Arm LPAE format to support custom allocators in a separate commit. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20231124142434.1577550-2-boris.brezillon@collabora.com Signed-off-by: Joerg Roedel <jroedel@suse.de> iommu: Extend LPAE page table format to support custom allocators We need that in order to implement the VM_BIND ioctl in the GPU driver targeting new Mali GPUs. VM_BIND is about executing MMU map/unmap requests asynchronously, possibly after waiting for external dependencies encoded as dma_fences. We intend to use the drm_sched framework to automate the dependency tracking and VM job dequeuing logic, but this comes with its own set of constraints, one of them being the fact we are not allowed to allocate memory in the drm_gpu_scheduler_ops::run_job() to avoid this sort of deadlocks: - VM_BIND map job needs to allocate a page table to map some memory to the VM. No memory available, so kswapd is kicked - GPU driver shrinker backend ends up waiting on the fence attached to the VM map job or any other job fence depending on this VM operation. With custom allocators, we will be able to pre-reserve enough pages to guarantee the map/unmap operations we queued will take place without going through the system allocator. But we can also optimize allocation/reservation by not free-ing pages immediately, so any upcoming page table allocation requests can be serviced by some free page table pool kept at the driver level. I might also be valuable for other aspects of GPU and similar use-cases, like fine-grained memory accounting and resource limiting. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20231124142434.1577550-3-boris.brezillon@collabora.com Signed-off-by: Joerg Roedel <jroedel@suse.de> drm/sched: Add FIFO sched policy to run queue When many entities are competing for the same run queue on the same scheduler, we observe an unusually long wait times and some jobs get starved. This has been observed on GPUVis. The issue is due to the Round Robin policy used by schedulers to pick up the next entity's job queue for execution. Under stress of many entities and long job queues within entity some jobs could be stuck for very long time in it's entity's queue before being popped from the queue and executed while for other entities with smaller job queues a job might execute earlier even though that job arrived later then the job in the long queue. Fix: Add FIFO selection policy to entities in run queue, chose next entity on run queue in such order that if job on one entity arrived earlier then job on another entity the first job will start executing earlier regardless of the length of the entity's job queue. v2: Switch to rb tree structure for entities based on TS of oldest job waiting in the job queue of an entity. Improves next entity extraction to O(1). Entity TS update O(log N) where N is the number of entities in the run-queue Drop default option in module control parameter. v3: Various cosmetical fixes and minor refactoring of fifo update function. (Luben) v4: Switch drm_sched_rq_select_entity_fifo to in order search (Luben) v5: Fix up drm_sched_rq_select_entity_fifo loop (Luben) v6: Add missing drm_sched_rq_remove_fifo_locked v7: Fix ts sampling bug and more cosmetic stuff (Luben) v8: Fix module parameter string (Luben) Cc: Luben Tuikov <luben.tuikov@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Direct Rendering Infrastructure - Development <dri-devel@lists.freedesktop.org> Cc: AMD Graphics <amd-gfx@lists.freedesktop.org> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Tested-by: Yunxiang Li (Teddy) <Yunxiang.Li@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220930041258.1050247-1-luben.tuikov@amd.com drm/scheduler: Set the FIFO scheduling policy as the default The currently default Round-Robin GPU scheduling can result in starvation of entities which have a large number of jobs, over entities which have a very small number of jobs (single digit). This can be illustrated in the following diagram, where jobs are alphabetized to show their chronological order of arrival, where job A is the oldest, B is the second oldest, and so on, to J, the most recent job to arrive. ---> entities j | H-F-----A--E--I-- o | --G-----B-----J-- b | --------C-------- s\/ --------D-------- WLOG, assuming all jobs are "ready", then a R-R scheduling will execute them in the following order (a slice off of the top of the entities' list), H, F, A, E, I, G, B, J, C, D. However, to mitigate job starvation, we'd rather execute C and D before E, and so on, given, of course, that they're all ready to be executed. So, if all jobs are ready at this instant, the order of execution for this and the next 9 instances of picking the next job to execute, should really be, A, B, C, D, E, F, G, H, I, J, which is their chronological order. The only reason for this order to be broken, is if an older job is not yet ready, but a younger job is ready, at an instant of picking a new job to execute. For instance if job C wasn't ready at time 2, but job D was ready, then we'd pick job D, like this: 0 +1 +2 ... A, B, D, ... And from then on, C would be preferred before all other jobs, if it is ready at the time when a new job for execution is picked. So, if C became ready two steps later, the execution order would look like this: ......0 +1 +2 ... A, B, D, E, C, F, G, H, I, J This is what the FIFO GPU scheduling algorithm achieves. It uses a Red-Black tree to keep jobs sorted in chronological order, where picking the oldest job is O(1) (we use the "cached" structure), and balancing the tree is O(log n). IOW, it picks the *oldest ready* job to execute now. The implementation is already in the kernel, and this commit only changes the default GPU scheduling algorithm to use. This was tested and achieves about 1% faster performance over the Round Robin algorithm. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Cc: Direct Rendering Infrastructure - Development <dri-devel@lists.freedesktop.org> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221024212634.27230-1-luben.tuikov@amd.com Signed-off-by: Christian König <christian.koenig@amd.com> drm/scheduler: add drm_sched_job_add_resv_dependencies Add a new function to update job dependencies from a resv obj. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-3-christian.koenig@amd.com drm/scheduler: remove drm_sched_dependency_optimized Not used any more. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-12-christian.koenig@amd.com drm/scheduler: rework entity flush, kill and fini This was buggy because when we had to wait for entities which were killed as well we would just deadlock. Instead move all the dependency handling into the callbacks so that will all happen asynchronously. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-13-christian.koenig@amd.com drm/scheduler: rename dependency callback into prepare_job This now matches much better what this is doing. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-14-christian.koenig@amd.com drm/amdgpu: revert "implement tdr advanced mode" This reverts commit e6c6338f393b74ac0b303d567bb918b44ae7ad75. This feature basically re-submits one job after another to figure out which one was the one causing a hang. This is obviously incompatible with gang-submit which requires that multiple jobs run at the same time. It's also absolutely not helpful to crash the hardware multiple times if a clean recovery is desired. For testing and debugging environments we should rather disable recovery alltogether to be able to inspect the state with a hw debugger. Additional to that the sw implementation is clearly buggy and causes reference count issues for the hardware fence. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> drm/scheduler: Fix lockup in drm_sched_entity_kill() The drm_sched_entity_kill() is invoked twice by drm_sched_entity_destroy() while userspace process is exiting or being killed. First time it's invoked when sched entity is flushed and second time when entity is released. This causes a lockup within wait_for_completion(entity_idle) due to how completion API works. Calling wait_for_completion() more times than complete() was invoked is a error condition that causes lockup because completion internally uses counter for complete/wait calls. The complete_all() must be used instead in such cases. This patch fixes lockup of Panfrost driver that is reproducible by killing any application in a middle of 3d drawing operation. Fixes: 2fdb8a8f07c2 ("drm/scheduler: rework entity flush, kill and fini") Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221123001303.533968-1-dmitry.osipenko@collabora.com drm/scheduler: deprecate drm_sched_resubmit_jobs This interface is not working as it should. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221109095010.141189-5-christian.koenig@amd.com drm/scheduler: track GPU active time per entity Track the accumulated time that jobs from this entity were active on the GPU. This allows drivers using the scheduler to trivially implement the DRM fdinfo when the hardware doesn't provide more specific information than signalling job completion anyways. [Bagas: Append missing colon to @elapsed_ns] Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> drm/sched: Create wrapper to add a syncobj dependency to job In order to add a syncobj's fence as a dependency to a job, it is necessary to call drm_syncobj_find_fence() to find the fence and then add the dependency with drm_sched_job_add_dependency(). So, wrap these steps in one single function, drm_sched_job_add_syncobj_dependency(). Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230209124447.467867-2-mcanal@igalia.com drm/scheduler: Fix variable name in function description Compiling AMD GPU drivers displays two warnings: drivers/gpu/drm/scheduler/sched_main.c:738: warning: Function parameter or member 'file' not described in 'drm_sched_job_add_syncobj_dependency' drivers/gpu/drm/scheduler/sched_main.c:738: warning: Excess function parameter 'file_private' description in 'drm_sched_job_add_syncobj_dependency' Get rid of them by renaming the variable name on the function description Signed-off-by: Caio Novais <caionovais@usp.br> Link: https://lore.kernel.org/r/20230325131532.6356-1-caionovais@usp.br Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> drm/scheduler: Add fence deadline support As the finished fence is the one that is exposed to userspace, and therefore the one that other operations, like atomic update, would block on, we need to propagate the deadline from from the finished fence to the actual hw fence. v2: Split into drm_sched_fence_set_parent() (ckoenig) v3: Ensure a thread calling drm_sched_fence_set_deadline_finished() sees fence->parent set before drm_sched_fence_set_parent() does this test_bit(DMA_FENCE_FLAG_HAS_DEADLINE_BIT). Signed-off-by: Rob Clark <robdclark@chromium.org> Acked-by: Luben Tuikov <luben.tuikov@amd.com> Revert "drm/scheduler: track GPU active time per entity" This reverts commit df622729ddbf as it introduces a use-after-free, which isn't easy to fix without going back to the design drawing board. Reported-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> drm/scheduler: Fix UAF race in drm_sched_entity_push_job() After a job is pushed into the queue, it is owned by the scheduler core and may be freed at any time, so we can't write nor read the submit timestamp after that point. Fixes oopses observed with the drm/asahi driver, found with kASAN. Signed-off-by: Asahi Lina <lina@asahilina.net> Link: https://lore.kernel.org/r/20230406-scheduler-uaf-2-v1-1-972531cf0a81@asahilina.net Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> drm/sched: Check scheduler ready before calling timeout handling During an IGT GPU reset test we see the following oops, [ +0.000003] ------------[ cut here ]------------ [ +0.000000] WARNING: CPU: 9 PID: 0 at kernel/workqueue.c:1656 __queue_delayed_work+0x6d/0xa0 [ +0.000004] Modules linked in: iptable_filter bpfilter amdgpu(OE) nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_generic intel_rapl_msr ledtrig_audio snd_hda_codec_hdmi intel_rapl_common snd_hda_intel edac_mce_amd snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core iommu_v2 gpu_sched(OE) kvm_amd drm_buddy snd_hwdep kvm video drm_ttm_helper snd_pcm ttm snd_seq_midi drm_display_helper snd_seq_midi_event snd_rawmidi cec crct10dif_pclmul ghash_clmulni_intel sha512_ssse3 snd_seq aesni_intel rc_core crypto_simd cryptd binfmt_misc drm_kms_helper rapl snd_seq_device input_leds joydev snd_timer i2c_algo_bit syscopyarea snd ccp sysfillrect sysimgblt wmi_bmof k10temp soundcore mac_hid sch_fq_codel msr parport_pc ppdev drm lp parport ramoops reed_solomon pstore_blk pstore_zone efi_pstore ip_tables x_tables autofs4 hid_generic usbhid hid r8169 ahci xhci_pci gpio_amdpt realtek i2c_piix4 wmi crc32_pclmul xhci_pci_renesas libahci gpio_generic [ +0.000070] CPU: 9 PID: 0 Comm: swapper/9 Tainted: G W OE 6.1.11+ #2 [ +0.000003] Hardware name: Gigabyte Technology Co., Ltd. AB350-Gaming 3/AB350-Gaming 3-CF, BIOS F7 06/16/2017 [ +0.000001] RIP: 0010:__queue_delayed_work+0x6d/0xa0 [ +0.000003] Code: 7a 50 48 01 c1 48 89 4a 30 81 ff 00 20 00 00 75 38 4c 89 cf e8 64 3e 0a 00 5d e9 1e c5 11 01 e8 99 f7 ff ff 5d e9 13 c5 11 01 <0f> 0b eb c1 0f 0b 48 81 7a 38 70 5c 0e 81 74 9f 0f 0b 48 8b 42 28 [ +0.000002] RSP: 0018:ffffc90000398d60 EFLAGS: 00010007 [ +0.000002] RAX: ffff88810d589c60 RBX: 0000000000000000 RCX: 0000000000000000 [ +0.000002] RDX: ffff88810d589c58 RSI: 0000000000000000 RDI: 0000000000002000 [ +0.000001] RBP: ffffc90000398d60 R08: 0000000000000000 R09: ffff88810d589c78 [ +0.000002] R10: 72705f305f39765f R11: 7866673a6d72645b R12: ffff88810d589c58 [ +0.000001] R13: 0000000000002000 R14: 0000000000000000 R15: 0000000000000000 [ +0.000002] FS: 0000000000000000(0000) GS:ffff8887fee40000(0000) knlGS:0000000000000000 [ +0.000001] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000002] CR2: 00005562c4797fa0 CR3: 0000000110da0000 CR4: 00000000003506e0 [ +0.000002] Call Trace: [ +0.000001] <IRQ> [ +0.000001] mod_delayed_work_on+0x5e/0xa0 [ +0.000004] drm_sched_fault+0x23/0x30 [gpu_sched] [ +0.000007] gfx_v9_0_fault.isra.0+0xa6/0xd0 [amdgpu] [ +0.000258] gfx_v9_0_priv_reg_irq+0x29/0x40 [amdgpu] [ +0.000254] amdgpu_irq_dispatch+0x1ac/0x2b0 [amdgpu] [ +0.000243] amdgpu_ih_process+0x89/0x130 [amdgpu] [ +0.000245] amdgpu_irq_handler+0x24/0x60 [amdgpu] [ +0.000165] __handle_irq_event_percpu+0x4f/0x1a0 [ +0.000003] handle_irq_event_percpu+0x15/0x50 [ +0.000001] handle_irq_event+0x39/0x60 [ +0.000002] handle_edge_irq+0xa8/0x250 [ +0.000003] __common_interrupt+0x7b/0x150 [ +0.000002] common_interrupt+0xc1/0xe0 [ +0.000003] </IRQ> [ +0.000000] <TASK> [ +0.000001] asm_common_interrupt+0x27/0x40 [ +0.000002] RIP: 0010:native_safe_halt+0xb/0x10 [ +0.000003] Code: 46 ff ff ff cc cc cc cc cc cc cc cc cc cc cc eb 07 0f 00 2d 69 f2 5e 00 f4 e9 f1 3b 3e 00 90 eb 07 0f 00 2d 59 f2 5e 00 fb f4 <e9> e0 3b 3e 00 0f 1f 44 00 00 55 48 89 e5 53 e8 b1 d4 fe ff 66 90 [ +0.000002] RSP: 0018:ffffc9000018fdc8 EFLAGS: 00000246 [ +0.000002] RAX: 0000000000004000 RBX: 000000000002e5a8 RCX: 000000000000001f [ +0.000001] RDX: 0000000000000001 RSI: ffff888101298800 RDI: ffff888101298864 [ +0.000001] RBP: ffffc9000018fdd0 R08: 000000527f64bd8b R09: 000000000001dc90 [ +0.000001] R10: 000000000001dc90 R11: 0000000000000003 R12: 0000000000000001 [ +0.000001] R13: ffff888101298864 R14: ffffffff832d9e20 R15: ffff888193aa8c00 [ +0.000003] ? acpi_idle_do_entry+0x5e/0x70 [ +0.000002] acpi_idle_enter+0xd1/0x160 [ +0.000003] cpuidle_enter_state+0x9a/0x6e0 [ +0.000003] cpuidle_enter+0x2e/0x50 [ +0.000003] call_cpuidle+0x23/0x50 [ +0.000002] do_idle+0x1de/0x260 [ +0.000002] cpu_startup_entry+0x20/0x30 [ +0.000002] start_secondary+0x120/0x150 [ +0.000003] secondary_startup_64_no_verify+0xe5/0xeb [ +0.000004] </TASK> [ +0.000000] ---[ end trace 0000000000000000 ]--- [ +0.000003] BUG: kernel NULL pointer dereference, address: 0000000000000102 [ +0.006233] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring gfx_low timeout, signaled seq=3, emitted seq=4 [ +0.000734] #PF: supervisor read access in kernel mode [ +0.009670] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* Process information: process amd_deadlock pid 2002 thread amd_deadlock pid 2002 [ +0.005135] #PF: error_code(0x0000) - not-present page [ +0.000002] PGD 0 P4D 0 [ +0.000002] Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000002] CPU: 9 PID: 0 Comm: swapper/9 Tainted: G W OE 6.1.11+ #2 [ +0.000002] Hardware name: Gigabyte Technology Co., Ltd. AB350-Gaming 3/AB350-Gaming 3-CF, BIOS F7 06/16/2017 [ +0.012101] amdgpu 0000:0c:00.0: amdgpu: GPU reset begin! [ +0.005136] RIP: 0010:__queue_work+0x1f/0x4e0 [ +0.000004] Code: 87 cd 11 01 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 49 89 d5 41 54 49 89 f4 53 48 83 ec 10 89 7d d4 <f6> 86 02 01 00 00 01 0f 85 6c 03 00 00 e8 7f 36 08 00 8b 45 d4 48 For gfx_rings the schedulers may not be initialized by amdgpu_device_init_schedulers() due to ring->no_scheduler flag being set to true and thus the timeout_wq is NULL. As a result, since all ASICs call drm_sched_fault() unconditionally even for schedulers which have not been initialized, it is simpler to use the ready condition which indicates whether the given scheduler worker thread runs and whether the timeout_wq of the reset domain has been initialized. Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Cc: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20230406200054.633379-1-luben.tuikov@amd.com drm/scheduler: set entity to NULL in drm_sched_entity_pop_job() It already happend a few times that patches slipped through which implemented access to an entity through a job that was already removed from the entities queue. Since jobs and entities might have different lifecycles, this can potentially cause UAF bugs. In order to make it obvious that a jobs entity pointer shouldn't be accessed after drm_sched_entity_pop_job() was called successfully, set the jobs entity pointer to NULL once the job is removed from the entity queue. Moreover, debugging a potential NULL pointer dereference is way easier than potentially corrupted memory through a UAF. Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://lore.kernel.org/r/20230418100453.4433-1-dakr@redhat.com Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> drm/scheduler: properly forward fence errors When a hw fence is signaled with an error properly forward that to the finished fence. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230420115752.31470-1-christian.koenig@amd.com drm/scheduler: add drm_sched_entity_error and use rcu for last_scheduled Switch to using RCU handling for the last scheduled job and add a function to return the error code of it. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230420115752.31470-2-christian.koenig@amd.com drm/scheduler: mark jobs without fence as canceled When no hw fence is provided for a job that means that the job didn't executed. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230427122726.1290170-1-christian.koenig@amd.com drm/sched: Check scheduler work queue before calling timeout handling During an IGT GPU reset test we see again oops despite of commit 0c8c901aaaebc9 (drm/sched: Check scheduler ready before calling timeout handling). It uses ready condition whether to call drm_sched_fault which unwind the TDR leads to GPU reset. However it looks the ready condition is overloaded with other meanings, for example, for the following stack is related GPU reset : 0 gfx_v9_0_cp_gfx_start 1 gfx_v9_0_cp_gfx_resume 2 gfx_v9_0_cp_resume 3 gfx_v9_0_hw_init 4 gfx_v9_0_resume 5 amdgpu_device_ip_resume_phase2 does the following: /* start the ring */ gfx_v9_0_cp_gfx_start(adev); ring->sched.ready = true; The same approach is for other ASICs as well : gfx_v8_0_cp_gfx_resume gfx_v10_0_kiq_resume, etc... As a result, our GPU reset test causes GPU fault which calls unconditionally gfx_v9_0_fault and then drm_sched_fault. However now it depends on whether the interrupt service routine drm_sched_fault is executed after gfx_v9_0_cp_gfx_start is completed which sets the ready field of the scheduler to true even for uninitialized schedulers and causes oops vs no fault or when ISR drm_sched_fault is completed prior gfx_v9_0_cp_gfx_start and NULL pointer dereference does not occur. Use the field timeout_wq to prevent oops for uninitialized schedulers. The field could be initialized by the work queue of resetting the domain. v1: Corrections to commit message (Luben) Fixes: 11b3b9f461c5c4 ("drm/sched: Check scheduler ready before calling timeout handling") Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Link: https://lore.kernel.org/r/20230510135111.58631-1-vitaly.prosyak@amd.com Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> drm/sched: Remove redundant check The rq pointer points inside the drm_gpu_scheduler structure. Thus it can't be NULL. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: c61cdbdbffc1 ("drm/scheduler: Fix hang when sched_entity released") Signed-off-by: Vladislav Efanov <VEfanov@ispras.ru> Link: https://lore.kernel.org/r/20230517125247.434103-1-VEfanov@ispras.ru Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> drm/sched: Rename to drm_sched_can_queue() Rename drm_sched_ready() to drm_sched_can_queue(). "ready" can mean many things and is thus meaningless in this context. Instead, rename to a name which precisely conveys what is being checked. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Link: https://lore.kernel.org/r/20230517233550.377847-1-luben.tuikov@amd.com drm/sched: Rename to drm_sched_wakeup_if_can_queue() Rename drm_sched_wakeup() to drm_sched_wakeup_if_canqueue() since the former is misleading, as it wakes up the GPU scheduler _only if_ more jobs can be queued to the underlying hardware. This distinction is important to make, since the wake conditional in the GPU scheduler thread wakes up when other conditions are also true, e.g. when there are jobs to be cleaned. For instance, a user might want to wake up the scheduler only because there are more jobs to clean, but whether we can queue more jobs is irrelevant. v2: Separate "canqueue" to "can_queue". (Alex D.) Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20230517233550.377847-2-luben.tuikov@amd.com Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> drm/scheduler: avoid infinite loop if entity's dependency is a scheduled error fence [Why] drm_sched_entity_add_dependency_cb ignores the scheduled fence and return false. If entity's dependency is a scheduler error fence and drm_sched_stop is called due to TDR, drm_sched_entity_pop_job will wait for the dependency infinitely. [How] Do not wait or ignore the scheduled error fence, add drm_sched_entity_wakeup callback for the dependency with scheduled error fence. Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> drm/sched: Make sure we wait for all dependencies in kill_jobs_cb() drm_sched_entity_kill_jobs_cb() logic is omitting the last fence popped from the dependency array that was waited upon before drm_sched_entity_kill() was called (drm_sched_entity::dependency field), so we're basically waiting for all dependencies except one. In theory, this wait shouldn't be needed because resources should have their users registered to the dma_resv object, thus guaranteeing that future jobs wanting to access these resources wait on all the previous users (depending on the access type, of course). But we want to keep these explicit waits in the kill entity path just in case. Let's make sure we keep all dependencies in the array in drm_sched_job_dependency(), so we can iterate over the array and wait in drm_sched_entity_kill_jobs_cb(). We also make sure we wait on drm_sched_fence::finished if we were originally asked to wait on drm_sched_fence::scheduled. In that case, we assume the intent was to delegate the wait to the firmware/GPU or rely on the pipelining done at the entity/scheduler level, but when killing jobs, we really want to wait for completion not just scheduling. v2: - Don't evict deps in drm_sched_job_dependency() v3: - Always wait for drm_sched_fence::finished fences in drm_sched_entity_kill_jobs_cb() when we see a sched_fence v4: - Fix commit message - Fix a use-after-free bug v5: - Flag deps on which we should only wait for the scheduled event at insertion time v6: - Back to v4 implementation - Add Christian's R-b Cc: Frank Binns <frank.binns@imgtec.com> Cc: Sarah Walker <sarah.walker@imgtec.com> Cc: Donald Robson <donald.robson@imgtec.com> Cc: Luben Tuikov <luben.tuikov@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Suggested-by: "Christian König" <christian.koenig@amd.com> Reviewed-by: "Christian König" <christian.koenig@amd.com> Acked-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230619071921.3465992-1-boris.brezillon@collabora.com drm/sched: Call drm_sched_fence_set_parent() from drm_sched_fence_scheduled() Drivers that can delegate waits to the firmware/GPU pass the scheduled fence to drm_sched_job_add_dependency(), and issue wait commands to the firmware/GPU at job submission time. For this to be possible, they need all their 'native' dependencies to have a valid parent since this is where the actual HW fence information are encoded. In drm_sched_main(), we currently call drm_sched_fence_set_parent() after drm_sched_fence_scheduled(), leaving a short period of time during which the job depending on this fence can be submitted. Since setting parent and signaling the fence are two things that are kinda related (you can't have a parent if the job hasn't been scheduled), it probably makes sense to pass the parent fence to drm_sched_fence_scheduled() and let it call drm_sched_fence_set_parent() before it signals the scheduled fence. Here is a detailed description of the race we are fixing here: Thread A Thread B - calls drm_sched_fence_scheduled() - signals s_fence->scheduled which wakes up thread B - entity dep signaled, checking the next dep - no more deps waiting - entity is picked for job submission by drm_gpu_scheduler - run_job() is called - run_job() tries to collect native fence info from s_fence->parent, but it's NULL => BOOM, we can't do our native wait - calls drm_sched_fence_set_parent() v2: * Fix commit message v3: * Add a detailed description of the race to the commit message * Add Luben's R-b Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Cc: Frank Binns <frank.binns@imgtec.com> Cc: Sarah Walker <sarah.walker@imgtec.com> Cc: Donald Robson <donald.robson@imgtec.com> Cc: Luben Tuikov <luben.tuikov@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230623075204.382350-1-boris.brezillon@collabora.com dma-buf: add dma_fence_timestamp helper When a fence signals there is a very small race window where the timestamp isn't updated yet. sync_file solves this by busy waiting for the timestamp to appear, but on other ocassions didn't handled this correctly. Provide a dma_fence_timestamp() helper function for this and use it in all appropriate cases. Another alternative would be to grab the spinlock when that happens. v2 by teddy: add a wait parameter to wait for the timestamp to show up, in case the accurate timestamp is needed and/or the timestamp is not based on ktime (e.g. hw timestamp) v3 chk: drop the parameter again for unified handling Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: 1774baa64f93 ("drm/scheduler: Change scheduled fence track v2") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20230929104725.2358-1-christian.koenig@amd.com drm/sched: Convert the GPU scheduler to variable number of run-queues The GPU scheduler has now a variable number of run-queues, which are set up at drm_sched_init() time. This way, each driver announces how many run-queues it requires (supports) per each GPU scheduler it creates. Note, that run-queues correspond to scheduler "priorities", thus if the number of run-queues is set to 1 at drm_sched_init(), then that scheduler supports a single run-queue, i.e. single "priority". If a driver further sets a single entity per run-queue, then this creates a 1-to-1 correspondence between a scheduler and a scheduled entity. Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Qiang Yu <yuq825@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Danilo Krummrich <dakr@redhat.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Emma Anholt <emma@anholt.net> Cc: etnaviv@lists.freedesktop.org Cc: lima@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20231023032251.164775-1-luben.tuikov@amd.com drm/sched: Add drm_sched_wqueue_* helpers Add scheduler wqueue ready, stop, and start helpers to hide the implementation details of the scheduler from the drivers. v2: - s/sched_wqueue/sched_wqueue (Luben) - Remove the extra white line after the return-statement (Luben) - update drm_sched_wqueue_ready comment (Luben) Cc: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20231031032439.1558703-2-matthew.brost@intel.com Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Convert drm scheduler to use a work queue rather than kthread In Xe, the new Intel GPU driver, a choice has made to have a 1 to 1 mapping between a drm_gpu_scheduler and drm_sched_entity. At first this seems a bit odd but let us explain the reasoning below. 1. In Xe the submission order from multiple drm_sched_entity is not guaranteed to be the same completion even if targeting the same hardware engine. This is because in Xe we have a firmware scheduler, the GuC, which allowed to reorder, timeslice, and preempt submissions. If a using shared drm_gpu_scheduler across multiple drm_sched_entity, the TDR falls apart as the TDR expects submission order == completion order. Using a dedicated drm_gpu_scheduler per drm_sched_entity solve this problem. 2. In Xe submissions are done via programming a ring buffer (circular buffer), a drm_gpu_scheduler provides a limit on number of jobs, if the limit of number jobs is set to RING_SIZE / MAX_SIZE_PER_JOB we get flow control on the ring for free. A problem with this design is currently a drm_gpu_scheduler uses a kthread for submission / job cleanup. This doesn't scale if a large number of drm_gpu_scheduler are used. To work around the scaling issue, use a worker rather than kthread for submission / job cleanup. v2: - (Rob Clark) Fix msm build - Pass in run work queue v3: - (Boris) don't have loop in worker v4: - (Tvrtko) break out submit ready, stop, start helpers into own patch v5: - (Boris) default to ordered work queue v6: - (Luben / checkpatch) fix alignment in msm_ringbuffer.c - (Luben) s/drm_sched_submit_queue/drm_sched_wqueue_enqueue - (Luben) Update comment for drm_sched_wqueue_enqueue - (Luben) Positive check for submit_wq in drm_sched_init - (Luben) s/alloc_submit_wq/own_submit_wq v7: - (Luben) s/drm_sched_wqueue_enqueue/drm_sched_run_job_queue v8: - (Luben) Adjust var names / comments Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20231031032439.1558703-3-matthew.brost@intel.com Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Split free_job into own work item Rather than call free_job and run_job in same work item have a dedicated work item for each. This aligns with the design and intended use of work queues. v2: - Test for DMA_FENCE_FLAG_TIMESTAMP_BIT before setting timestamp in free_job() work item (Danilo) v3: - Drop forward dec of drm_sched_select_entity (Boris) - Return in drm_sched_run_job_work if entity NULL (Boris) v4: - Replace dequeue with peek and invert logic (Luben) - Wrap to 100 lines (Luben) - Update comments for *_queue / *_queue_if_ready functions (Luben) v5: - Drop peek argument, blindly reinit idle (Luben) - s/drm_sched_free_job_queue_if_ready/drm_sched_free_job_queue_if_done (Luben) - Update work_run_job & work_free_job kernel doc (Luben) v6: - Do not move drm_sched_select_entity in file (Luben) Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20231031032439.1558703-4-matthew.brost@intel.com Reviewed-by: Luben Tuikov <ltuikov89@gmail.com> Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Add drm_sched_start_timeout_unlocked helper Also add a lockdep assert to drm_sched_start_timeout. Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20231031032439.1558703-5-matthew.brost@intel.com Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Add a helper to queue TDR immediately Add a helper whereby a driver can invoke TDR immediately. v2: - Drop timeout args, rename function, use mod delayed work (Luben) v3: - s/XE/Xe (Luben) - present tense in commit message (Luben) - Adjust comment for drm_sched_tdr_queue_imm (Luben) v4: - Adjust commit message (Luben) Cc: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20231031032439.1558703-6-matthew.brost@intel.com Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Rename drm_sched_get_cleanup_job to be more descriptive "Get cleanup job" makes it sound like helper is returning a job which will execute some cleanup, or something, while the kerneldoc itself accurately says "fetch the next _finished_ job". So lets rename the helper to be self documenting. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Luben Tuikov <ltuikov89@gmail.com> Cc: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231102105538.391648-2-tvrtko.ursulin@linux.intel.com Reviewed-by: Luben Tuikov <ltuikov89@gmail.com> Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Move free worker re-queuing out of the if block Whether or not there are more jobs to clean up does not depend on the existance of the current job, given both drm_sched_get_finished_job and drm_sched_free_job_queue_if_done take and drop the job list lock. Therefore it is confusing to make it read like there is a dependency. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Luben Tuikov <ltuikov89@gmail.com> Cc: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231102105538.391648-3-tvrtko.ursulin@linux.intel.com Reviewed-by: Luben Tuikov <ltuikov89@gmail.com> Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Rename drm_sched_free_job_queue to be more descriptive The current name makes it sound like helper will free a queue, while what it does is it enqueues the free job worker. Rename it to drm_sched_run_free_queue to align with existing drm_sched_run_job_queue. Despite that creating an illusion there are two queues, while in reality there is only one, at least it creates a consistent naming for the two enqueuing helpers. At the same time simplify the "if done" helper by dropping the suffix and adding a double underscore prefix to the one which just enqueues. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Luben Tuikov <ltuikov89@gmail.com> Cc: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231102105538.391648-4-tvrtko.ursulin@linux.intel.com Reviewed-by: Luben Tuikov <ltuikov89@gmail.com> Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Rename drm_sched_run_job_queue_if_ready and clarify kerneldoc "If ready" is not immediately clear what it means - is the scheduler ready or something else? Drop the suffix, clarify kerneldoc, and employ the same naming scheme as in drm_sched_run_free_queue: - drm_sched_run_job_queue - enqueues if there is something to enqueue *and* scheduler is ready (can queue) - __drm_sched_run_job_queue - low-level helper to simply queue the job Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Luben Tuikov <ltuikov89@gmail.com> Cc: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231102105538.391648-5-tvrtko.ursulin@linux.intel.com Reviewed-by: Luben Tuikov <ltuikov89@gmail.com> Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Drop suffix from drm_sched_wakeup_if_can_queue Because a) helper is exported to other parts of the scheduler and b) there isn't a plain drm_sched_wakeup to begin with, I think we can drop the suffix and by doing so separate the intimiate knowledge between the scheduler components a bit better. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Luben Tuikov <ltuikov89@gmail.com> Cc: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231102105538.391648-6-tvrtko.ursulin@linux.intel.com Reviewed-by: Luben Tuikov <ltuikov89@gmail.com> Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Don't disturb the entity when in RR-mode scheduling Don't call drm_sched_select_entity() in drm_sched_run_job_queue(). In fact, rename __drm_sched_run_job_queue() to just drm_sched_run_job_queue(), and let it do just that, schedule the work item for execution. The problem is that drm_sched_run_job_queue() calls drm_sched_select_entity() to determine if the scheduler has an entity ready in one of its run-queues, and in the case of the Round-Robin (RR) scheduling, the function drm_sched_rq_select_entity_rr() does just that, selects the _next_ entity which is ready, sets up the run-queue and completion and returns that entity. The FIFO scheduling algorithm is unaffected. Now, since drm_sched_run_job_work() also calls drm_sched_select_entity(), then in the case of RR scheduling, that would result in drm_sched_select_entity() having been called twice, which may result in skipping a ready entity if more than one entity is ready. This commit fixes this by eliminating the call to drm_sched_select_entity() from drm_sched_run_job_queue(), and leaves it only in drm_sched_run_job_work(). v2: Rebased on top of Tvrtko's renames series of patches. (Luben) Add fixes-tag. (Tvrtko) Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> Fixes: f7fe64ad0f22ff ("drm/sched: Split free_job into own work item") Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231107041020.10035-2-ltuikov89@gmail.com drm/sched: Qualify drm_sched_wakeup() by drm_sched_entity_is_ready() Don't "wake up" the GPU scheduler unless the entity is ready, as well as we can queue to the scheduler, i.e. there is no point in waking up the scheduler for the entity unless the entity is ready. Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> Fixes: bc8d6a9df99038 ("drm/sched: Don't disturb the entity when in RR-mode scheduling") Reviewed-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231110000123.72565-2-ltuikov89@gmail.com drm/sched: implement dynamic job-flow control Currently, job flow control is implemented simply by limiting the number of jobs in flight. Therefore, a scheduler is initialized with a c…

When using rockchip mpp I meet the folowing kernel crash. Diabling DMA-BUF debug checks solves the issue. Unable to handle kernel paging request at virtual address ffffffffa42fc000 Mem abort info: ESR = 0x0000000096000145 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000145 CM = 1, WnR = 1 swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000001cfb000 [ffffffffa42fc000] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000145 [#2] SMP Modules linked in: CPU: 7 PID: 2081 Comm: mppvideodec0:sr Tainted: G D 6.1.43-6-rockchip-g32498cfaff7c #1 Hardware name: Radxa ROCK 5B (DT) pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : dcache_inval_poc+0x40/0x58 lr : arch_sync_dma_for_cpu+0x30/0x3c sp : ffffffc00ba83c90 x29: ffffffc00ba83c90 x28: ffffff8002fa1e80 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000014 x23: 0000007f8e04e1f0 x22: 0000000000000001 x21: 0000000000000002 x20: 000000000000001e x19: ffffff8004b84c00 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000007f8e04e1f0 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffffc00871b6c4 x8 : 0000000000000001 x7 : ffffff8003e2fd38 x6 : ffffffc00ba83d88 x5 : ffffffc00ba83d88 x4 : ffffffc00871b660 x3 : 000000000000003f x2 : 0000000000000040 x1 : ffffffffa43fc000 x0 : ffffffffa42fc000 Call trace: dcache_inval_poc+0x40/0x58 iommu_dma_sync_sg_for_cpu+0x64/0xbc dma_sync_sg_for_cpu+0x40/0x44 system_heap_dma_buf_begin_cpu_access+0x7c/0x84 dma_buf_begin_cpu_access+0x3c/0x70 dma_buf_ioctl+0x12c/0x2fc vfs_ioctl+0x2c/0x48 __arm64_sys_ioctl+0x7c/0xac invoke_syscall+0x80/0x10c el0_svc_common.constprop.0+0xc8/0x118 do_el0_svc+0x20/0x28 el0_svc+0x14/0x3c el0t_64_sync_handler+0x90/0xf8 el0t_64_sync+0x158/0x15c Signed-off-by: Stephen Chen <stephen@radxa.com>

Arm has introduced a new v10 GPU architecture that replaces the Job Manager interface with a new Command Stream Frontend. It adds firmware driven command stream queues that can be used by kernel and user space to submit jobs to the GPU. Add the initial schema for the device tree that is based on support for RK3588 SoC. The minimum number of clocks is one for the IP, but on Rockchip platforms they will tend to expose the semi-independent clocks for better power management. v5: - Move the opp-table node under the gpu node v4: - Fix formatting issue v3: - Cleanup commit message to remove redundant text - Added opp-table property and re-ordered entries - Clarified power-domains and power-domain-names requirements for RK3588. - Cleaned up example Note: power-domains and power-domain-names requirements for other platforms are still work in progress, hence the bindings are left incomplete here. v2: - New commit Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Conor Dooley <conor+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Rob Herring <robh@kernel.org> drm: execution context for GEM buffers v7 This adds the infrastructure for an execution context for GEM buffers which is similar to the existing TTMs execbuf util and intended to replace it in the long term. The basic functionality is that we abstracts the necessary loop to lock many different GEM buffers with automated deadlock and duplicate handling. v2: drop xarray and use dynamic resized array instead, the locking overhead is unnecessary and measurable. v3: drop duplicate tracking, radeon is really the only one needing that. v4: fixes issues pointed out by Danilo, some typos in comments and a helper for lock arrays of GEM objects. v5: some suggestions by Boris Brezillon, especially just use one retry macro, drop loop in prepare_array, use flags instead of bool v6: minor changes suggested by Thomas, Boris and Danilo v7: minor typos pointed out by checkpatch.pl fixed Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Danilo Krummrich <dakr@redhat.com> Tested-by: Danilo Krummrich <dakr@redhat.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230711133122.3710-2-christian.koenig@amd.com drm: manager to keep track of GPUs VA mappings Add infrastructure to keep track of GPU virtual address (VA) mappings with a decicated VA space manager implementation. New UAPIs, motivated by Vulkan sparse memory bindings graphics drivers start implementing, allow userspace applications to request multiple and arbitrary GPU VA mappings of buffer objects. The DRM GPU VA manager is intended to serve the following purposes in this context. 1) Provide infrastructure to track GPU VA allocations and mappings, using an interval tree (RB-tree). 2) Generically connect GPU VA mappings to their backing buffers, in particular DRM GEM objects. 3) Provide a common implementation to perform more complex mapping operations on the GPU VA space. In particular splitting and merging of GPU VA mappings, e.g. for intersecting mapping requests or partial unmap requests. Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Acked-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Tested-by: Matthew Brost <matthew.brost@intel.com> Tested-by: Donald Robson <donald.robson@imgtec.com> Suggested-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230720001443.2380-2-dakr@redhat.com drm: manager: Fix printk format for size_t sizeof() returns a size_t which may be different to an unsigned long. Use the correct format specifier of '%zu' to prevent compiler warnings. Fixes: e6303f323b1a ("drm: manager to keep track of GPUs VA mappings") Reviewed-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/2bf64010-c40a-8b84-144c-5387412b579e@arm.com drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map() The prev pointer in __drm_gpuva_sm_map() was used to implement automatic merging of mappings. Since automatic merging did not make its way upstream, remove this leftover. Fixes: e6303f323b1a ("drm: manager to keep track of GPUs VA mappings") Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230823233119.2891-1-dakr@redhat.com drm/gpuvm: rename struct drm_gpuva_manager to struct drm_gpuvm Rename struct drm_gpuva_manager to struct drm_gpuvm including corresponding functions. This way the GPUVA manager's structures align very well with the documentation of VM_BIND [1] and VM_BIND locking [2]. It also provides a better foundation for the naming of data structures and functions introduced for implementing a common dma-resv per GPU-VM including tracking of external and evicted objects in subsequent patches. [1] Documentation/gpu/drm-vm-bind-async.rst [2] Documentation/gpu/drm-vm-bind-locking.rst Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Acked-by: Dave Airlie <airlied@redhat.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230920144343.64830-2-dakr@redhat.com drm/gpuvm: allow building as module HB: drivers/gpu/drm/nouveau/Kconfig skipped because there is no gpuvm support of nouveau in 6.1 Currently, the DRM GPUVM does not have any core dependencies preventing a module build. Also, new features from subsequent patches require helpers (namely drm_exec) which can be built as module. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230920144343.64830-3-dakr@redhat.com drm/gpuvm: convert WARN() to drm_WARN() variants HB: drivers/gpu/drm/nouveau/nouveau_uvmm.c skipped since 6.1 does not support gpuvm on nv Use drm_WARN() and drm_WARN_ON() variants to indicate drivers the context the failing VM resides in. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-2-dakr@redhat.com drm/gpuvm: don't always WARN in drm_gpuvm_check_overflow() Don't always WARN in drm_gpuvm_check_overflow() and separate it into a drm_gpuvm_check_overflow() and a dedicated drm_gpuvm_warn_check_overflow() variant. This avoids printing warnings due to invalid userspace requests. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-3-dakr@redhat.com drm/gpuvm: export drm_gpuvm_range_valid() Drivers may use this function to validate userspace requests in advance, hence export it. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-4-dakr@redhat.com drm/gpuvm: add common dma-resv per struct drm_gpuvm hb: drivers/gpu/drm/nouveau/nouveau_uvmm.c skipped Provide a common dma-resv for GEM objects not being used outside of this GPU-VM. This is used in a subsequent patch to generalize dma-resv, external and evicted object handling and GEM validation. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-6-dakr@redhat.com drm/gpuvm: add drm_gpuvm_flags to drm_gpuvm HB: drivers/gpu/drm/nouveau/nouveau_uvmm.c skipped Introduce flags for struct drm_gpuvm, this required by subsequent commits. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-8-dakr@redhat.com drm/gpuvm: reference count drm_gpuvm structures HB: drivers/gpu/drm/nouveau/nouveau_uvmm.c skipped Implement reference counting for struct drm_gpuvm. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-10-dakr@redhat.com drm/gpuvm: add an abstraction for a VM / BO combination HB: drivers/gpu/drm/nouveau/nouveau_uvmm.c skipped Add an abstraction layer between the drm_gpuva mappings of a particular drm_gem_object and this GEM object itself. The abstraction represents a combination of a drm_gem_object and drm_gpuvm. The drm_gem_object holds a list of drm_gpuvm_bo structures (the structure representing this abstraction), while each drm_gpuvm_bo contains list of mappings of this GEM object. This has multiple advantages: 1) We can use the drm_gpuvm_bo structure to attach it to various lists of the drm_gpuvm. This is useful for tracking external and evicted objects per VM, which is introduced in subsequent patches. 2) Finding mappings of a certain drm_gem_object mapped in a certain drm_gpuvm becomes much cheaper. 3) Drivers can derive and extend the structure to easily represent driver specific states of a BO for a certain GPUVM. The idea of this abstraction was taken from amdgpu, hence the credit for this idea goes to the developers of amdgpu. Cc: Christian König <christian.koenig@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-11-dakr@redhat.com drm/gpuvm: track/lock/validate external/evicted objects Currently the DRM GPUVM offers common infrastructure to track GPU VA allocations and mappings, generically connect GPU VA mappings to their backing buffers and perform more complex mapping operations on the GPU VA space. However, there are more design patterns commonly used by drivers, which can potentially be generalized in order to make the DRM GPUVM represent a basis for GPU-VM implementations. In this context, this patch aims at generalizing the following elements. 1) Provide a common dma-resv for GEM objects not being used outside of this GPU-VM. 2) Provide tracking of external GEM objects (GEM objects which are shared with other GPU-VMs). 3) Provide functions to efficiently lock all GEM objects dma-resv the GPU-VM contains mappings of. 4) Provide tracking of evicted GEM objects the GPU-VM contains mappings of, such that validation of evicted GEM objects is accelerated. 5) Provide some convinience functions for common patterns. Big thanks to Boris Brezillon for his help to figure out locking for drivers updating the GPU VA space within the fence signalling path. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Suggested-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108001259.15123-12-dakr@redhat.com drm/gpuvm: fall back to drm_exec_lock_obj() Fall back to drm_exec_lock_obj() if num_fences is zero for the drm_gpuvm_prepare_* function family. Otherwise dma_resv_reserve_fences() would actually allocate slots even though num_fences is zero. Cc: Christian König <christian.koenig@amd.com> Acked-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231129220835.297885-2-dakr@redhat.com drm/gpuvm: Let drm_gpuvm_bo_put() report when the vm_bo object is destroyed Some users need to release resources attached to the vm_bo object when it's destroyed. In Panthor's case, we need to release the pin ref so BO pages can be returned to the system when all GPU mappings are gone. This could be done through a custom drm_gpuvm::vm_bo_free() hook, but this has all sort of locking implications that would force us to expose a drm_gem_shmem_unpin_locked() helper, not to mention the fact that having a ::vm_bo_free() implementation without a ::vm_bo_alloc() one seems odd. So let's keep things simple, and extend drm_gpuvm_bo_put() to report when the object is destroyed. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231204151406.1977285-1-boris.brezillon@collabora.com drm/exec: Pass in initial # of objects HB: skipped drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c drivers/gpu/drm/amd/amdgpu/amdgpu_csa.c drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c drivers/gpu/drm/amd/amdgpu/amdgpu_umsch_mm.c drivers/gpu/drm/amd/amdkfd/kfd_svm.c drivers/gpu/drm/imagination/pvr_job.c drivers/gpu/drm/nouveau/nouveau_uvmm.c In cases where the # is known ahead of time, it is silly to do the table resize dance. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Christian König <christian.koenig@amd.com> Patchwork: https://patchwork.freedesktop.org/patch/568338/ drm/gem-shmem: When drm_gem_object_init failed, should release object when goto err_free, the object had init, so it should be release when fail. Signed-off-by: ChunyouTang <tangchunyou@163.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20221119064131.364-1-tangchunyou@163.com drm: Remove usage of deprecated DRM_DEBUG_PRIME drm_print.h says DRM_DEBUG_PRIME is deprecated in favor of drm_dbg_prime(). Signed-off-by: Siddh Raman Pant <code@siddh.me> Reviewed-by: Simon Ser <contact@emersion.fr> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/cd663b1bc42189e55898cddecdb3b73c591b341a.1673269059.git.code@siddh.me drm/shmem: Cleanup drm_gem_shmem_create_with_handle() Once we create the handle, the handle owns the reference. Currently nothing was doing anything with the shmem ptr after the handle was created, but let's change drm_gem_shmem_create_with_handle() to not return the pointer, so-as to not encourage problematic use of this function in the future. As a bonus, it makes the code a bit cleaner. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230123154831.3191821-1-robdclark@gmail.com drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt() Other functions touching shmem->sgt take the pages lock, so do that here too. drm_gem_shmem_get_pages() & co take the same lock, so move to the _locked() variants to avoid recursive locking. Discovered while auditing locking to write the Rust abstractions. Fixes: 2194a63a818d ("drm: Add library for shmem backed GEM objects") Fixes: 4fa3d66f132b ("drm/shmem: Do dma_unmap_sg before purging pages") Signed-off-by: Asahi Lina <lina@asahilina.net> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230205125124.2260-1-lina@asahilina.net drm/shmem-helper: Switch to use drm_* debug helpers Ease debugging of a multi-GPU system by using drm_WARN_*() and drm_dbg_kms() helpers that print out DRM device name corresponding to shmem GEM. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Suggested-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/all/20230108210445.3948344-6-dmitry.osipenko@collabora.com/ drm/shmem-helper: Don't use vmap_use_count for dma-bufs DMA-buf core has its own refcounting of vmaps, use it instead of drm-shmem counting. This change prepares drm-shmem for addition of memory shrinker support where drm-shmem will use a single dma-buf reservation lock for all operations performed over dma-bufs. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/all/20230108210445.3948344-7-dmitry.osipenko@collabora.com/ drm/shmem-helper: Switch to reservation lock Replace all drm-shmem locks with a GEM reservation lock. This makes locks consistent with dma-buf locking convention where importers are responsible for holding reservation lock for all operations performed over dma-bufs, preventing deadlock between dma-buf importers and exporters. Suggested-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/all/20230108210445.3948344-8-dmitry.osipenko@collabora.com/ drm/shmem-helper: Revert accidental non-GPL export The referenced commit added a wrapper for drm_gem_shmem_get_pages_sgt(), but in the process it accidentally changed the export type from GPL to non-GPL. Switch it back to GPL. Reported-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Fixes: ddddedaa0db9 ("drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()") Signed-off-by: Asahi Lina <lina@asahilina.net> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230227-shmem-export-fix-v1-1-8880b2c25e81@asahilina.net Revert "drm/shmem-helper: Switch to reservation lock" This reverts commit 67b7836d4458790f1261e31fe0ce3250989784f0. The locking appears incomplete. A caller of SHMEM helper's pin function never acquires the dma-buf reservation lock. So we get WARNING: CPU: 3 PID: 967 at drivers/gpu/drm/drm_gem_shmem_helper.c:243 drm_gem_shmem_pin+0x42/0x90 [drm_shmem_helper] Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230228152612.19971-1-tzimmermann@suse.de drm/shmem-helper: Switch to reservation lock Replace all drm-shmem locks with a GEM reservation lock. This makes locks consistent with dma-buf locking convention where importers are responsible for holding reservation lock for all operations performed over dma-bufs, preventing deadlock between dma-buf importers and exporters. Suggested-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-7-dmitry.osipenko@collabora.com drm/shmem-helper: Reset vma->vm_ops before calling dma_buf_mmap() The dma-buf backend is supposed to provide its own vm_ops, but some implementation just have nothing special to do and leave vm_ops untouched, probably expecting this field to be zero initialized (this is the case with the system_heap implementation for instance). Let's reset vma->vm_ops to NULL to keep things working with these implementations. Fixes: 26d3ac3cb04d ("drm/shmem-helpers: Redirect mmap for imported dma-buf") Cc: <stable@vger.kernel.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reported-by: Roman Stratiienko <r.stratiienko@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Tested-by: Roman Stratiienko <r.stratiienko@gmail.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230724112610.60974-1-boris.brezillon@collabora.com iommu: Allow passing custom allocators to pgtable drivers This will be useful for GPU drivers who want to keep page tables in a pool so they can: - keep freed page tables in a free pool and speed-up upcoming page table allocations - batch page table allocation instead of allocating one page at a time - pre-reserve pages for page tables needed for map/unmap operations, to ensure map/unmap operations don't try to allocate memory in paths they're allowed to block or fail It might also be valuable for other aspects of GPU and similar use-cases, like fine-grained memory accounting and resource limiting. We will extend the Arm LPAE format to support custom allocators in a separate commit. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20231124142434.1577550-2-boris.brezillon@collabora.com Signed-off-by: Joerg Roedel <jroedel@suse.de> iommu: Extend LPAE page table format to support custom allocators We need that in order to implement the VM_BIND ioctl in the GPU driver targeting new Mali GPUs. VM_BIND is about executing MMU map/unmap requests asynchronously, possibly after waiting for external dependencies encoded as dma_fences. We intend to use the drm_sched framework to automate the dependency tracking and VM job dequeuing logic, but this comes with its own set of constraints, one of them being the fact we are not allowed to allocate memory in the drm_gpu_scheduler_ops::run_job() to avoid this sort of deadlocks: - VM_BIND map job needs to allocate a page table to map some memory to the VM. No memory available, so kswapd is kicked - GPU driver shrinker backend ends up waiting on the fence attached to the VM map job or any other job fence depending on this VM operation. With custom allocators, we will be able to pre-reserve enough pages to guarantee the map/unmap operations we queued will take place without going through the system allocator. But we can also optimize allocation/reservation by not free-ing pages immediately, so any upcoming page table allocation requests can be serviced by some free page table pool kept at the driver level. I might also be valuable for other aspects of GPU and similar use-cases, like fine-grained memory accounting and resource limiting. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20231124142434.1577550-3-boris.brezillon@collabora.com Signed-off-by: Joerg Roedel <jroedel@suse.de> drm/sched: Add FIFO sched policy to run queue When many entities are competing for the same run queue on the same scheduler, we observe an unusually long wait times and some jobs get starved. This has been observed on GPUVis. The issue is due to the Round Robin policy used by schedulers to pick up the next entity's job queue for execution. Under stress of many entities and long job queues within entity some jobs could be stuck for very long time in it's entity's queue before being popped from the queue and executed while for other entities with smaller job queues a job might execute earlier even though that job arrived later then the job in the long queue. Fix: Add FIFO selection policy to entities in run queue, chose next entity on run queue in such order that if job on one entity arrived earlier then job on another entity the first job will start executing earlier regardless of the length of the entity's job queue. v2: Switch to rb tree structure for entities based on TS of oldest job waiting in the job queue of an entity. Improves next entity extraction to O(1). Entity TS update O(log N) where N is the number of entities in the run-queue Drop default option in module control parameter. v3: Various cosmetical fixes and minor refactoring of fifo update function. (Luben) v4: Switch drm_sched_rq_select_entity_fifo to in order search (Luben) v5: Fix up drm_sched_rq_select_entity_fifo loop (Luben) v6: Add missing drm_sched_rq_remove_fifo_locked v7: Fix ts sampling bug and more cosmetic stuff (Luben) v8: Fix module parameter string (Luben) Cc: Luben Tuikov <luben.tuikov@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Direct Rendering Infrastructure - Development <dri-devel@lists.freedesktop.org> Cc: AMD Graphics <amd-gfx@lists.freedesktop.org> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Tested-by: Yunxiang Li (Teddy) <Yunxiang.Li@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220930041258.1050247-1-luben.tuikov@amd.com drm/scheduler: Set the FIFO scheduling policy as the default The currently default Round-Robin GPU scheduling can result in starvation of entities which have a large number of jobs, over entities which have a very small number of jobs (single digit). This can be illustrated in the following diagram, where jobs are alphabetized to show their chronological order of arrival, where job A is the oldest, B is the second oldest, and so on, to J, the most recent job to arrive. ---> entities j | H-F-----A--E--I-- o | --G-----B-----J-- b | --------C-------- s\/ --------D-------- WLOG, assuming all jobs are "ready", then a R-R scheduling will execute them in the following order (a slice off of the top of the entities' list), H, F, A, E, I, G, B, J, C, D. However, to mitigate job starvation, we'd rather execute C and D before E, and so on, given, of course, that they're all ready to be executed. So, if all jobs are ready at this instant, the order of execution for this and the next 9 instances of picking the next job to execute, should really be, A, B, C, D, E, F, G, H, I, J, which is their chronological order. The only reason for this order to be broken, is if an older job is not yet ready, but a younger job is ready, at an instant of picking a new job to execute. For instance if job C wasn't ready at time 2, but job D was ready, then we'd pick job D, like this: 0 +1 +2 ... A, B, D, ... And from then on, C would be preferred before all other jobs, if it is ready at the time when a new job for execution is picked. So, if C became ready two steps later, the execution order would look like this: ......0 +1 +2 ... A, B, D, E, C, F, G, H, I, J This is what the FIFO GPU scheduling algorithm achieves. It uses a Red-Black tree to keep jobs sorted in chronological order, where picking the oldest job is O(1) (we use the "cached" structure), and balancing the tree is O(log n). IOW, it picks the *oldest ready* job to execute now. The implementation is already in the kernel, and this commit only changes the default GPU scheduling algorithm to use. This was tested and achieves about 1% faster performance over the Round Robin algorithm. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Cc: Direct Rendering Infrastructure - Development <dri-devel@lists.freedesktop.org> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221024212634.27230-1-luben.tuikov@amd.com Signed-off-by: Christian König <christian.koenig@amd.com> drm/scheduler: add drm_sched_job_add_resv_dependencies Add a new function to update job dependencies from a resv obj. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-3-christian.koenig@amd.com drm/scheduler: remove drm_sched_dependency_optimized Not used any more. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-12-christian.koenig@amd.com drm/scheduler: rework entity flush, kill and fini This was buggy because when we had to wait for entities which were killed as well we would just deadlock. Instead move all the dependency handling into the callbacks so that will all happen asynchronously. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-13-christian.koenig@amd.com drm/scheduler: rename dependency callback into prepare_job This now matches much better what this is doing. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-14-christian.koenig@amd.com drm/amdgpu: revert "implement tdr advanced mode" This reverts commit e6c6338f393b74ac0b303d567bb918b44ae7ad75. This feature basically re-submits one job after another to figure out which one was the one causing a hang. This is obviously incompatible with gang-submit which requires that multiple jobs run at the same time. It's also absolutely not helpful to crash the hardware multiple times if a clean recovery is desired. For testing and debugging environments we should rather disable recovery alltogether to be able to inspect the state with a hw debugger. Additional to that the sw implementation is clearly buggy and causes reference count issues for the hardware fence. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> drm/scheduler: Fix lockup in drm_sched_entity_kill() The drm_sched_entity_kill() is invoked twice by drm_sched_entity_destroy() while userspace process is exiting or being killed. First time it's invoked when sched entity is flushed and second time when entity is released. This causes a lockup within wait_for_completion(entity_idle) due to how completion API works. Calling wait_for_completion() more times than complete() was invoked is a error condition that causes lockup because completion internally uses counter for complete/wait calls. The complete_all() must be used instead in such cases. This patch fixes lockup of Panfrost driver that is reproducible by killing any application in a middle of 3d drawing operation. Fixes: 2fdb8a8f07c2 ("drm/scheduler: rework entity flush, kill and fini") Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221123001303.533968-1-dmitry.osipenko@collabora.com drm/scheduler: deprecate drm_sched_resubmit_jobs This interface is not working as it should. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221109095010.141189-5-christian.koenig@amd.com drm/scheduler: track GPU active time per entity Track the accumulated time that jobs from this entity were active on the GPU. This allows drivers using the scheduler to trivially implement the DRM fdinfo when the hardware doesn't provide more specific information than signalling job completion anyways. [Bagas: Append missing colon to @elapsed_ns] Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> drm/sched: Create wrapper to add a syncobj dependency to job In order to add a syncobj's fence as a dependency to a job, it is necessary to call drm_syncobj_find_fence() to find the fence and then add the dependency with drm_sched_job_add_dependency(). So, wrap these steps in one single function, drm_sched_job_add_syncobj_dependency(). Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230209124447.467867-2-mcanal@igalia.com drm/scheduler: Fix variable name in function description Compiling AMD GPU drivers displays two warnings: drivers/gpu/drm/scheduler/sched_main.c:738: warning: Function parameter or member 'file' not described in 'drm_sched_job_add_syncobj_dependency' drivers/gpu/drm/scheduler/sched_main.c:738: warning: Excess function parameter 'file_private' description in 'drm_sched_job_add_syncobj_dependency' Get rid of them by renaming the variable name on the function description Signed-off-by: Caio Novais <caionovais@usp.br> Link: https://lore.kernel.org/r/20230325131532.6356-1-caionovais@usp.br Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> drm/scheduler: Add fence deadline support As the finished fence is the one that is exposed to userspace, and therefore the one that other operations, like atomic update, would block on, we need to propagate the deadline from from the finished fence to the actual hw fence. v2: Split into drm_sched_fence_set_parent() (ckoenig) v3: Ensure a thread calling drm_sched_fence_set_deadline_finished() sees fence->parent set before drm_sched_fence_set_parent() does this test_bit(DMA_FENCE_FLAG_HAS_DEADLINE_BIT). Signed-off-by: Rob Clark <robdclark@chromium.org> Acked-by: Luben Tuikov <luben.tuikov@amd.com> Revert "drm/scheduler: track GPU active time per entity" This reverts commit df622729ddbf as it introduces a use-after-free, which isn't easy to fix without going back to the design drawing board. Reported-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> drm/scheduler: Fix UAF race in drm_sched_entity_push_job() After a job is pushed into the queue, it is owned by the scheduler core and may be freed at any time, so we can't write nor read the submit timestamp after that point. Fixes oopses observed with the drm/asahi driver, found with kASAN. Signed-off-by: Asahi Lina <lina@asahilina.net> Link: https://lore.kernel.org/r/20230406-scheduler-uaf-2-v1-1-972531cf0a81@asahilina.net Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> drm/sched: Check scheduler ready before calling timeout handling During an IGT GPU reset test we see the following oops, [ +0.000003] ------------[ cut here ]------------ [ +0.000000] WARNING: CPU: 9 PID: 0 at kernel/workqueue.c:1656 __queue_delayed_work+0x6d/0xa0 [ +0.000004] Modules linked in: iptable_filter bpfilter amdgpu(OE) nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_generic intel_rapl_msr ledtrig_audio snd_hda_codec_hdmi intel_rapl_common snd_hda_intel edac_mce_amd snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core iommu_v2 gpu_sched(OE) kvm_amd drm_buddy snd_hwdep kvm video drm_ttm_helper snd_pcm ttm snd_seq_midi drm_display_helper snd_seq_midi_event snd_rawmidi cec crct10dif_pclmul ghash_clmulni_intel sha512_ssse3 snd_seq aesni_intel rc_core crypto_simd cryptd binfmt_misc drm_kms_helper rapl snd_seq_device input_leds joydev snd_timer i2c_algo_bit syscopyarea snd ccp sysfillrect sysimgblt wmi_bmof k10temp soundcore mac_hid sch_fq_codel msr parport_pc ppdev drm lp parport ramoops reed_solomon pstore_blk pstore_zone efi_pstore ip_tables x_tables autofs4 hid_generic usbhid hid r8169 ahci xhci_pci gpio_amdpt realtek i2c_piix4 wmi crc32_pclmul xhci_pci_renesas libahci gpio_generic [ +0.000070] CPU: 9 PID: 0 Comm: swapper/9 Tainted: G W OE 6.1.11+ #2 [ +0.000003] Hardware name: Gigabyte Technology Co., Ltd. AB350-Gaming 3/AB350-Gaming 3-CF, BIOS F7 06/16/2017 [ +0.000001] RIP: 0010:__queue_delayed_work+0x6d/0xa0 [ +0.000003] Code: 7a 50 48 01 c1 48 89 4a 30 81 ff 00 20 00 00 75 38 4c 89 cf e8 64 3e 0a 00 5d e9 1e c5 11 01 e8 99 f7 ff ff 5d e9 13 c5 11 01 <0f> 0b eb c1 0f 0b 48 81 7a 38 70 5c 0e 81 74 9f 0f 0b 48 8b 42 28 [ +0.000002] RSP: 0018:ffffc90000398d60 EFLAGS: 00010007 [ +0.000002] RAX: ffff88810d589c60 RBX: 0000000000000000 RCX: 0000000000000000 [ +0.000002] RDX: ffff88810d589c58 RSI: 0000000000000000 RDI: 0000000000002000 [ +0.000001] RBP: ffffc90000398d60 R08: 0000000000000000 R09: ffff88810d589c78 [ +0.000002] R10: 72705f305f39765f R11: 7866673a6d72645b R12: ffff88810d589c58 [ +0.000001] R13: 0000000000002000 R14: 0000000000000000 R15: 0000000000000000 [ +0.000002] FS: 0000000000000000(0000) GS:ffff8887fee40000(0000) knlGS:0000000000000000 [ +0.000001] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000002] CR2: 00005562c4797fa0 CR3: 0000000110da0000 CR4: 00000000003506e0 [ +0.000002] Call Trace: [ +0.000001] <IRQ> [ +0.000001] mod_delayed_work_on+0x5e/0xa0 [ +0.000004] drm_sched_fault+0x23/0x30 [gpu_sched] [ +0.000007] gfx_v9_0_fault.isra.0+0xa6/0xd0 [amdgpu] [ +0.000258] gfx_v9_0_priv_reg_irq+0x29/0x40 [amdgpu] [ +0.000254] amdgpu_irq_dispatch+0x1ac/0x2b0 [amdgpu] [ +0.000243] amdgpu_ih_process+0x89/0x130 [amdgpu] [ +0.000245] amdgpu_irq_handler+0x24/0x60 [amdgpu] [ +0.000165] __handle_irq_event_percpu+0x4f/0x1a0 [ +0.000003] handle_irq_event_percpu+0x15/0x50 [ +0.000001] handle_irq_event+0x39/0x60 [ +0.000002] handle_edge_irq+0xa8/0x250 [ +0.000003] __common_interrupt+0x7b/0x150 [ +0.000002] common_interrupt+0xc1/0xe0 [ +0.000003] </IRQ> [ +0.000000] <TASK> [ +0.000001] asm_common_interrupt+0x27/0x40 [ +0.000002] RIP: 0010:native_safe_halt+0xb/0x10 [ +0.000003] Code: 46 ff ff ff cc cc cc cc cc cc cc cc cc cc cc eb 07 0f 00 2d 69 f2 5e 00 f4 e9 f1 3b 3e 00 90 eb 07 0f 00 2d 59 f2 5e 00 fb f4 <e9> e0 3b 3e 00 0f 1f 44 00 00 55 48 89 e5 53 e8 b1 d4 fe ff 66 90 [ +0.000002] RSP: 0018:ffffc9000018fdc8 EFLAGS: 00000246 [ +0.000002] RAX: 0000000000004000 RBX: 000000000002e5a8 RCX: 000000000000001f [ +0.000001] RDX: 0000000000000001 RSI: ffff888101298800 RDI: ffff888101298864 [ +0.000001] RBP: ffffc9000018fdd0 R08: 000000527f64bd8b R09: 000000000001dc90 [ +0.000001] R10: 000000000001dc90 R11: 0000000000000003 R12: 0000000000000001 [ +0.000001] R13: ffff888101298864 R14: ffffffff832d9e20 R15: ffff888193aa8c00 [ +0.000003] ? acpi_idle_do_entry+0x5e/0x70 [ +0.000002] acpi_idle_enter+0xd1/0x160 [ +0.000003] cpuidle_enter_state+0x9a/0x6e0 [ +0.000003] cpuidle_enter+0x2e/0x50 [ +0.000003] call_cpuidle+0x23/0x50 [ +0.000002] do_idle+0x1de/0x260 [ +0.000002] cpu_startup_entry+0x20/0x30 [ +0.000002] start_secondary+0x120/0x150 [ +0.000003] secondary_startup_64_no_verify+0xe5/0xeb [ +0.000004] </TASK> [ +0.000000] ---[ end trace 0000000000000000 ]--- [ +0.000003] BUG: kernel NULL pointer dereference, address: 0000000000000102 [ +0.006233] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring gfx_low timeout, signaled seq=3, emitted seq=4 [ +0.000734] #PF: supervisor read access in kernel mode [ +0.009670] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* Process information: process amd_deadlock pid 2002 thread amd_deadlock pid 2002 [ +0.005135] #PF: error_code(0x0000) - not-present page [ +0.000002] PGD 0 P4D 0 [ +0.000002] Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000002] CPU: 9 PID: 0 Comm: swapper/9 Tainted: G W OE 6.1.11+ #2 [ +0.000002] Hardware name: Gigabyte Technology Co., Ltd. AB350-Gaming 3/AB350-Gaming 3-CF, BIOS F7 06/16/2017 [ +0.012101] amdgpu 0000:0c:00.0: amdgpu: GPU reset begin! [ +0.005136] RIP: 0010:__queue_work+0x1f/0x4e0 [ +0.000004] Code: 87 cd 11 01 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 49 89 d5 41 54 49 89 f4 53 48 83 ec 10 89 7d d4 <f6> 86 02 01 00 00 01 0f 85 6c 03 00 00 e8 7f 36 08 00 8b 45 d4 48 For gfx_rings the schedulers may not be initialized by amdgpu_device_init_schedulers() due to ring->no_scheduler flag being set to true and thus the timeout_wq is NULL. As a result, since all ASICs call drm_sched_fault() unconditionally even for schedulers which have not been initialized, it is simpler to use the ready condition which indicates whether the given scheduler worker thread runs and whether the timeout_wq of the reset domain has been initialized. Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Cc: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20230406200054.633379-1-luben.tuikov@amd.com drm/scheduler: set entity to NULL in drm_sched_entity_pop_job() It already happend a few times that patches slipped through which implemented access to an entity through a job that was already removed from the entities queue. Since jobs and entities might have different lifecycles, this can potentially cause UAF bugs. In order to make it obvious that a jobs entity pointer shouldn't be accessed after drm_sched_entity_pop_job() was called successfully, set the jobs entity pointer to NULL once the job is removed from the entity queue. Moreover, debugging a potential NULL pointer dereference is way easier than potentially corrupted memory through a UAF. Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://lore.kernel.org/r/20230418100453.4433-1-dakr@redhat.com Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> drm/scheduler: properly forward fence errors When a hw fence is signaled with an error properly forward that to the finished fence. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230420115752.31470-1-christian.koenig@amd.com drm/scheduler: add drm_sched_entity_error and use rcu for last_scheduled Switch to using RCU handling for the last scheduled job and add a function to return the error code of it. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230420115752.31470-2-christian.koenig@amd.com drm/scheduler: mark jobs without fence as canceled When no hw fence is provided for a job that means that the job didn't executed. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230427122726.1290170-1-christian.koenig@amd.com drm/sched: Check scheduler work queue before calling timeout handling During an IGT GPU reset test we see again oops despite of commit 0c8c901aaaebc9 (drm/sched: Check scheduler ready before calling timeout handling). It uses ready condition whether to call drm_sched_fault which unwind the TDR leads to GPU reset. However it looks the ready condition is overloaded with other meanings, for example, for the following stack is related GPU reset : 0 gfx_v9_0_cp_gfx_start 1 gfx_v9_0_cp_gfx_resume 2 gfx_v9_0_cp_resume 3 gfx_v9_0_hw_init 4 gfx_v9_0_resume 5 amdgpu_device_ip_resume_phase2 does the following: /* start the ring */ gfx_v9_0_cp_gfx_start(adev); ring->sched.ready = true; The same approach is for other ASICs as well : gfx_v8_0_cp_gfx_resume gfx_v10_0_kiq_resume, etc... As a result, our GPU reset test causes GPU fault which calls unconditionally gfx_v9_0_fault and then drm_sched_fault. However now it depends on whether the interrupt service routine drm_sched_fault is executed after gfx_v9_0_cp_gfx_start is completed which sets the ready field of the scheduler to true even for uninitialized schedulers and causes oops vs no fault or when ISR drm_sched_fault is completed prior gfx_v9_0_cp_gfx_start and NULL pointer dereference does not occur. Use the field timeout_wq to prevent oops for uninitialized schedulers. The field could be initialized by the work queue of resetting the domain. v1: Corrections to commit message (Luben) Fixes: 11b3b9f461c5c4 ("drm/sched: Check scheduler ready before calling timeout handling") Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Link: https://lore.kernel.org/r/20230510135111.58631-1-vitaly.prosyak@amd.com Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> drm/sched: Remove redundant check The rq pointer points inside the drm_gpu_scheduler structure. Thus it can't be NULL. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: c61cdbdbffc1 ("drm/scheduler: Fix hang when sched_entity released") Signed-off-by: Vladislav Efanov <VEfanov@ispras.ru> Link: https://lore.kernel.org/r/20230517125247.434103-1-VEfanov@ispras.ru Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> drm/sched: Rename to drm_sched_can_queue() Rename drm_sched_ready() to drm_sched_can_queue(). "ready" can mean many things and is thus meaningless in this context. Instead, rename to a name which precisely conveys what is being checked. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Link: https://lore.kernel.org/r/20230517233550.377847-1-luben.tuikov@amd.com drm/sched: Rename to drm_sched_wakeup_if_can_queue() Rename drm_sched_wakeup() to drm_sched_wakeup_if_canqueue() since the former is misleading, as it wakes up the GPU scheduler _only if_ more jobs can be queued to the underlying hardware. This distinction is important to make, since the wake conditional in the GPU scheduler thread wakes up when other conditions are also true, e.g. when there are jobs to be cleaned. For instance, a user might want to wake up the scheduler only because there are more jobs to clean, but whether we can queue more jobs is irrelevant. v2: Separate "canqueue" to "can_queue". (Alex D.) Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20230517233550.377847-2-luben.tuikov@amd.com Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> drm/scheduler: avoid infinite loop if entity's dependency is a scheduled error fence [Why] drm_sched_entity_add_dependency_cb ignores the scheduled fence and return false. If entity's dependency is a scheduler error fence and drm_sched_stop is called due to TDR, drm_sched_entity_pop_job will wait for the dependency infinitely. [How] Do not wait or ignore the scheduled error fence, add drm_sched_entity_wakeup callback for the dependency with scheduled error fence. Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> drm/sched: Make sure we wait for all dependencies in kill_jobs_cb() drm_sched_entity_kill_jobs_cb() logic is omitting the last fence popped from the dependency array that was waited upon before drm_sched_entity_kill() was called (drm_sched_entity::dependency field), so we're basically waiting for all dependencies except one. In theory, this wait shouldn't be needed because resources should have their users registered to the dma_resv object, thus guaranteeing that future jobs wanting to access these resources wait on all the previous users (depending on the access type, of course). But we want to keep these explicit waits in the kill entity path just in case. Let's make sure we keep all dependencies in the array in drm_sched_job_dependency(), so we can iterate over the array and wait in drm_sched_entity_kill_jobs_cb(). We also make sure we wait on drm_sched_fence::finished if we were originally asked to wait on drm_sched_fence::scheduled. In that case, we assume the intent was to delegate the wait to the firmware/GPU or rely on the pipelining done at the entity/scheduler level, but when killing jobs, we really want to wait for completion not just scheduling. v2: - Don't evict deps in drm_sched_job_dependency() v3: - Always wait for drm_sched_fence::finished fences in drm_sched_entity_kill_jobs_cb() when we see a sched_fence v4: - Fix commit message - Fix a use-after-free bug v5: - Flag deps on which we should only wait for the scheduled event at insertion time v6: - Back to v4 implementation - Add Christian's R-b Cc: Frank Binns <frank.binns@imgtec.com> Cc: Sarah Walker <sarah.walker@imgtec.com> Cc: Donald Robson <donald.robson@imgtec.com> Cc: Luben Tuikov <luben.tuikov@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Suggested-by: "Christian König" <christian.koenig@amd.com> Reviewed-by: "Christian König" <christian.koenig@amd.com> Acked-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230619071921.3465992-1-boris.brezillon@collabora.com drm/sched: Call drm_sched_fence_set_parent() from drm_sched_fence_scheduled() Drivers that can delegate waits to the firmware/GPU pass the scheduled fence to drm_sched_job_add_dependency(), and issue wait commands to the firmware/GPU at job submission time. For this to be possible, they need all their 'native' dependencies to have a valid parent since this is where the actual HW fence information are encoded. In drm_sched_main(), we currently call drm_sched_fence_set_parent() after drm_sched_fence_scheduled(), leaving a short period of time during which the job depending on this fence can be submitted. Since setting parent and signaling the fence are two things that are kinda related (you can't have a parent if the job hasn't been scheduled), it probably makes sense to pass the parent fence to drm_sched_fence_scheduled() and let it call drm_sched_fence_set_parent() before it signals the scheduled fence. Here is a detailed description of the race we are fixing here: Thread A Thread B - calls drm_sched_fence_scheduled() - signals s_fence->scheduled which wakes up thread B - entity dep signaled, checking the next dep - no more deps waiting - entity is picked for job submission by drm_gpu_scheduler - run_job() is called - run_job() tries to collect native fence info from s_fence->parent, but it's NULL => BOOM, we can't do our native wait - calls drm_sched_fence_set_parent() v2: * Fix commit message v3: * Add a detailed description of the race to the commit message * Add Luben's R-b Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Cc: Frank Binns <frank.binns@imgtec.com> Cc: Sarah Walker <sarah.walker@imgtec.com> Cc: Donald Robson <donald.robson@imgtec.com> Cc: Luben Tuikov <luben.tuikov@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230623075204.382350-1-boris.brezillon@collabora.com dma-buf: add dma_fence_timestamp helper When a fence signals there is a very small race window where the timestamp isn't updated yet. sync_file solves this by busy waiting for the timestamp to appear, but on other ocassions didn't handled this correctly. Provide a dma_fence_timestamp() helper function for this and use it in all appropriate cases. Another alternative would be to grab the spinlock when that happens. v2 by teddy: add a wait parameter to wait for the timestamp to show up, in case the accurate timestamp is needed and/or the timestamp is not based on ktime (e.g. hw timestamp) v3 chk: drop the parameter again for unified handling Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: 1774baa64f93 ("drm/scheduler: Change scheduled fence track v2") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20230929104725.2358-1-christian.koenig@amd.com drm/sched: Convert the GPU scheduler to variable number of run-queues The GPU scheduler has now a variable number of run-queues, which are set up at drm_sched_init() time. This way, each driver announces how many run-queues it requires (supports) per each GPU scheduler it creates. Note, that run-queues correspond to scheduler "priorities", thus if the number of run-queues is set to 1 at drm_sched_init(), then that scheduler supports a single run-queue, i.e. single "priority". If a driver further sets a single entity per run-queue, then this creates a 1-to-1 correspondence between a scheduler and a scheduled entity. Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Qiang Yu <yuq825@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Danilo Krummrich <dakr@redhat.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Emma Anholt <emma@anholt.net> Cc: etnaviv@lists.freedesktop.org Cc: lima@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20231023032251.164775-1-luben.tuikov@amd.com drm/sched: Add drm_sched_wqueue_* helpers Add scheduler wqueue ready, stop, and start helpers to hide the implementation details of the scheduler from the drivers. v2: - s/sched_wqueue/sched_wqueue (Luben) - Remove the extra white line after the return-statement (Luben) - update drm_sched_wqueue_ready comment (Luben) Cc: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20231031032439.1558703-2-matthew.brost@intel.com Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Convert drm scheduler to use a work queue rather than kthread In Xe, the new Intel GPU driver, a choice has made to have a 1 to 1 mapping between a drm_gpu_scheduler and drm_sched_entity. At first this seems a bit odd but let us explain the reasoning below. 1. In Xe the submission order from multiple drm_sched_entity is not guaranteed to be the same completion even if targeting the same hardware engine. This is because in Xe we have a firmware scheduler, the GuC, which allowed to reorder, timeslice, and preempt submissions. If a using shared drm_gpu_scheduler across multiple drm_sched_entity, the TDR falls apart as the TDR expects submission order == completion order. Using a dedicated drm_gpu_scheduler per drm_sched_entity solve this problem. 2. In Xe submissions are done via programming a ring buffer (circular buffer), a drm_gpu_scheduler provides a limit on number of jobs, if the limit of number jobs is set to RING_SIZE / MAX_SIZE_PER_JOB we get flow control on the ring for free. A problem with this design is currently a drm_gpu_scheduler uses a kthread for submission / job cleanup. This doesn't scale if a large number of drm_gpu_scheduler are used. To work around the scaling issue, use a worker rather than kthread for submission / job cleanup. v2: - (Rob Clark) Fix msm build - Pass in run work queue v3: - (Boris) don't have loop in worker v4: - (Tvrtko) break out submit ready, stop, start helpers into own patch v5: - (Boris) default to ordered work queue v6: - (Luben / checkpatch) fix alignment in msm_ringbuffer.c - (Luben) s/drm_sched_submit_queue/drm_sched_wqueue_enqueue - (Luben) Update comment for drm_sched_wqueue_enqueue - (Luben) Positive check for submit_wq in drm_sched_init - (Luben) s/alloc_submit_wq/own_submit_wq v7: - (Luben) s/drm_sched_wqueue_enqueue/drm_sched_run_job_queue v8: - (Luben) Adjust var names / comments Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20231031032439.1558703-3-matthew.brost@intel.com Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Split free_job into own work item Rather than call free_job and run_job in same work item have a dedicated work item for each. This aligns with the design and intended use of work queues. v2: - Test for DMA_FENCE_FLAG_TIMESTAMP_BIT before setting timestamp in free_job() work item (Danilo) v3: - Drop forward dec of drm_sched_select_entity (Boris) - Return in drm_sched_run_job_work if entity NULL (Boris) v4: - Replace dequeue with peek and invert logic (Luben) - Wrap to 100 lines (Luben) - Update comments for *_queue / *_queue_if_ready functions (Luben) v5: - Drop peek argument, blindly reinit idle (Luben) - s/drm_sched_free_job_queue_if_ready/drm_sched_free_job_queue_if_done (Luben) - Update work_run_job & work_free_job kernel doc (Luben) v6: - Do not move drm_sched_select_entity in file (Luben) Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20231031032439.1558703-4-matthew.brost@intel.com Reviewed-by: Luben Tuikov <ltuikov89@gmail.com> Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Add drm_sched_start_timeout_unlocked helper Also add a lockdep assert to drm_sched_start_timeout. Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20231031032439.1558703-5-matthew.brost@intel.com Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Add a helper to queue TDR immediately Add a helper whereby a driver can invoke TDR immediately. v2: - Drop timeout args, rename function, use mod delayed work (Luben) v3: - s/XE/Xe (Luben) - present tense in commit message (Luben) - Adjust comment for drm_sched_tdr_queue_imm (Luben) v4: - Adjust commit message (Luben) Cc: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20231031032439.1558703-6-matthew.brost@intel.com Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Rename drm_sched_get_cleanup_job to be more descriptive "Get cleanup job" makes it sound like helper is returning a job which will execute some cleanup, or something, while the kerneldoc itself accurately says "fetch the next _finished_ job". So lets rename the helper to be self documenting. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Luben Tuikov <ltuikov89@gmail.com> Cc: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231102105538.391648-2-tvrtko.ursulin@linux.intel.com Reviewed-by: Luben Tuikov <ltuikov89@gmail.com> Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Move free worker re-queuing out of the if block Whether or not there are more jobs to clean up does not depend on the existance of the current job, given both drm_sched_get_finished_job and drm_sched_free_job_queue_if_done take and drop the job list lock. Therefore it is confusing to make it read like there is a dependency. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Luben Tuikov <ltuikov89@gmail.com> Cc: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231102105538.391648-3-tvrtko.ursulin@linux.intel.com Reviewed-by: Luben Tuikov <ltuikov89@gmail.com> Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Rename drm_sched_free_job_queue to be more descriptive The current name makes it sound like helper will free a queue, while what it does is it enqueues the free job worker. Rename it to drm_sched_run_free_queue to align with existing drm_sched_run_job_queue. Despite that creating an illusion there are two queues, while in reality there is only one, at least it creates a consistent naming for the two enqueuing helpers. At the same time simplify the "if done" helper by dropping the suffix and adding a double underscore prefix to the one which just enqueues. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Luben Tuikov <ltuikov89@gmail.com> Cc: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231102105538.391648-4-tvrtko.ursulin@linux.intel.com Reviewed-by: Luben Tuikov <ltuikov89@gmail.com> Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Rename drm_sched_run_job_queue_if_ready and clarify kerneldoc "If ready" is not immediately clear what it means - is the scheduler ready or something else? Drop the suffix, clarify kerneldoc, and employ the same naming scheme as in drm_sched_run_free_queue: - drm_sched_run_job_queue - enqueues if there is something to enqueue *and* scheduler is ready (can queue) - __drm_sched_run_job_queue - low-level helper to simply queue the job Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Luben Tuikov <ltuikov89@gmail.com> Cc: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231102105538.391648-5-tvrtko.ursulin@linux.intel.com Reviewed-by: Luben Tuikov <ltuikov89@gmail.com> Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Drop suffix from drm_sched_wakeup_if_can_queue Because a) helper is exported to other parts of the scheduler and b) there isn't a plain drm_sched_wakeup to begin with, I think we can drop the suffix and by doing so separate the intimiate knowledge between the scheduler components a bit better. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Luben Tuikov <ltuikov89@gmail.com> Cc: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231102105538.391648-6-tvrtko.ursulin@linux.intel.com Reviewed-by: Luben Tuikov <ltuikov89@gmail.com> Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> drm/sched: Don't disturb the entity when in RR-mode scheduling Don't call drm_sched_select_entity() in drm_sched_run_job_queue(). In fact, rename __drm_sched_run_job_queue() to just drm_sched_run_job_queue(), and let it do just that, schedule the work item for execution. The problem is that drm_sched_run_job_queue() calls drm_sched_select_entity() to determine if the scheduler has an entity ready in one of its run-queues, and in the case of the Round-Robin (RR) scheduling, the function drm_sched_rq_select_entity_rr() does just that, selects the _next_ entity which is ready, sets up the run-queue and completion and returns that entity. The FIFO scheduling algorithm is unaffected. Now, since drm_sched_run_job_work() also calls drm_sched_select_entity(), then in the case of RR scheduling, that would result in drm_sched_select_entity() having been called twice, which may result in skipping a ready entity if more than one entity is ready. This commit fixes this by eliminating the call to drm_sched_select_entity() from drm_sched_run_job_queue(), and leaves it only in drm_sched_run_job_work(). v2: Rebased on top of Tvrtko's renames series of patches. (Luben) Add fixes-tag. (Tvrtko) Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> Fixes: f7fe64ad0f22ff ("drm/sched: Split free_job into own work item") Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231107041020.10035-2-ltuikov89@gmail.com drm/sched: Qualify drm_sched_wakeup() by drm_sched_entity_is_ready() Don't "wake up" the GPU scheduler unless the entity is ready, as well as we can queue to the scheduler, i.e. there is no point in waking up the scheduler for the entity unless the entity is ready. Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> Fixes: bc8d6a9df99038 ("drm/sched: Don't disturb the entity when in RR-mode scheduling") Reviewed-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231110000123.72565-2-ltuikov89@gmail.com drm/sched: implement dynamic job-flow control Currently, job flow control is implemented simply by limiting the number of jobs in flight. Therefore, a scheduler is initialized with a c…

Enable HDMI CEC

8fc0e3c

Those changes enable the HDMI cec driver and the pin.

hipboi merged commit bcf9feb into radxa:release-4.4-rockpi4 Mar 30, 2019

TheNetStriker deleted the CecDriver branch March 31, 2019 13:27

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Enable HDMI CEC #2

Enable HDMI CEC #2

Uh oh!

TheNetStriker commented Mar 30, 2019

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

Enable HDMI CEC #2

Enable HDMI CEC #2

Uh oh!

Conversation

TheNetStriker commented Mar 30, 2019

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants