Add overlay for mcp3202 12 bit ADC

arch/arm/boot/dts/overlays/Makefile

@@ -61,6 +61,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	mcp2515-can0.dtbo \
 	mcp2515-can1.dtbo \
 	mcp3008.dtbo \
+	mcp3202.dtbo \
 	media-center.dtbo \
 	midi-uart0.dtbo \
 	midi-uart1.dtbo \

arch/arm/boot/dts/overlays/README

@@ -994,6 +994,15 @@ Params: spi<n>-<m>-present      boolean, configure device at spi<n>, cs<m>
         spi<n>-<m>-speed        integer, set the spi bus speed for this device
 
 
+Name:   mcp3202
+Info:   Configures MCP3202 A/D converters
+        For devices on spi1 or spi2, the interfaces should be enabled
+        with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays.
+Load:   dtoverlay=mcp3202,<param>[=<val>]
+Params: spi<n>-<m>-present      boolean, configure device at spi<n>, cs<m>
+        spi<n>-<m>-speed        integer, set the spi bus speed for this device
+
+
 Name:   media-center
 Info:   Media Center HAT - 2.83" Touch Display + extras by Pi Supply
 Load:   dtoverlay=media-center,<param>=<val>

arch/arm/boot/dts/overlays/mcp3202-overlay.dts

@@ -0,0 +1,205 @@
+/*
+ * Device tree overlay for Microchip mcp3202 12-Bit A/D Converters
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
+
+	fragment@0 {
+		target = <&spidev0>;
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@1 {
+		target = <&spidev1>;
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@2 {
+		target-path = "spi1/spidev@0";
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@3 {
+		target-path = "spi1/spidev@1";
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@4 {
+		target-path = "spi1/spidev@2";
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@5 {
+		target-path = "spi2/spidev@0";
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@6 {
+		target-path = "spi2/spidev@1";
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@7 {
+		target-path = "spi2/spidev@2";
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@8 {
+		target = <&spi0>;
+		__dormant__ {
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mcp3202_00: mcp3202@0 {
+				compatible = "mcp3202";
+				reg = <0>;
+				spi-max-frequency = <1600000>;
+			};
+		};
+	};
+
+	fragment@9 {
+		target = <&spi0>;
+		__dormant__ {
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mcp3202_01: mcp3202@1 {
+				compatible = "mcp3202";
+				reg = <1>;
+				spi-max-frequency = <1600000>;
+			};
+		};
+	};
+
+	fragment@10 {
+		target = <&spi1>;
+		__dormant__ {
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mcp3202_10: mcp3202@0 {
+				compatible = "mcp3202";
+				reg = <0>;
+				spi-max-frequency = <1600000>;
+			};
+		};
+	};
+
+	fragment@11 {
+		target = <&spi1>;
+		__dormant__ {
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mcp3202_11: mcp3202@1 {
+				compatible = "mcp3202";
+				reg = <1>;
+				spi-max-frequency = <1600000>;
+			};
+		};
+	};
+
+	fragment@12 {
+		target = <&spi1>;
+		__dormant__ {
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mcp3202_12: mcp3202@2 {
+				compatible = "mcp3202";
+				reg = <2>;
+				spi-max-frequency = <1600000>;
+			};
+		};
+	};
+
+	fragment@13 {
+		target = <&spi2>;
+		__dormant__ {
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mcp3202_20: mcp3202@0 {
+				compatible = "mcp3202";
+				reg = <0>;
+				spi-max-frequency = <1600000>;
+			};
+		};
+	};
+
+	fragment@14 {
+		target = <&spi2>;
+		__dormant__ {
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mcp3202_21: mcp3202@1 {
+				compatible = "mcp3202";
+				reg = <1>;
+				spi-max-frequency = <1600000>;
+			};
+		};
+	};
+
+	fragment@15 {
+		target = <&spi2>;
+		__dormant__ {
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mcp3202_22: mcp3202@2 {
+				compatible = "mcp3202";
+				reg = <2>;
+				spi-max-frequency = <1600000>;
+			};
+		};
+	};
+
+	__overrides__ {
+		spi0-0-present = <0>, "+0+8";
+		spi0-1-present = <0>, "+1+9";
+		spi1-0-present = <0>, "+2+10";
+		spi1-1-present = <0>, "+3+11";
+		spi1-2-present = <0>, "+4+12";
+		spi2-0-present = <0>, "+5+13";
+		spi2-1-present = <0>, "+6+14";
+		spi2-2-present = <0>, "+7+15";
+		spi0-0-speed = <&mcp3202_00>, "spi-max-frequency:0";
+		spi0-1-speed = <&mcp3202_01>, "spi-max-frequency:0";
+		spi1-0-speed = <&mcp3202_10>, "spi-max-frequency:0";
+		spi1-1-speed = <&mcp3202_11>, "spi-max-frequency:0";
+		spi1-2-speed = <&mcp3202_12>, "spi-max-frequency:0";
+		spi2-0-speed = <&mcp3202_20>, "spi-max-frequency:0";
+		spi2-1-speed = <&mcp3202_21>, "spi-max-frequency:0";
+		spi2-2-speed = <&mcp3202_22>, "spi-max-frequency:0";
+	};
+};