AXI performance monitor driver

Uses the debugfs I/F to provide access to the AXI bus performance monitors. Requires the new mailbox peripheral access for access to the VPU performance registers, system bus access is done using direct register reads. Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
raspberrypi · Nov 7, 2017 · 7d11e59 · 7d11e59
1 parent 59341bd
commit 7d11e59
Show file tree

Hide file tree

Showing 8 changed files with 660 additions and 0 deletions.
diff --git a/arch/arm/boot/dts/bcm2708-rpi.dtsi b/arch/arm/boot/dts/bcm2708-rpi.dtsi
@@ -37,6 +37,7 @@
 		fb = &fb;
 		vchiq = &vchiq;
 		thermal = &thermal;
+		axiperf = &axiperf;
 	};
 
 	leds: leds {
@@ -119,6 +120,7 @@
 		sd_force_pio = <&sdhost>,"brcm,force-pio?";
 		sd_pio_limit = <&sdhost>,"brcm,pio-limit:0";
 		sd_debug     = <&sdhost>,"brcm,debug";
+		axiperf      = <&axiperf>,"status";
 	};
 };
 

diff --git a/arch/arm/boot/dts/bcm270x.dtsi b/arch/arm/boot/dts/bcm270x.dtsi
@@ -130,6 +130,14 @@
 			/* Add alias */
 			status = "disabled";
 		};
+
+		axiperf: axiperf {
+			compatible = "brcm,bcm2835-axiperf";
+			reg = <0x7e009800 0x100>,
+			      <0x7ee08000 0x100>;
+			firmware = <&firmware>;
+			status = "disabled";
+		};
 	};
 
 	vdd_5v0_reg: fixedregulator_5v0 {

diff --git a/arch/arm/configs/bcm2709_defconfig b/arch/arm/configs/bcm2709_defconfig
@@ -1179,6 +1179,7 @@ CONFIG_INV_MPU6050_I2C=m
 CONFIG_BMP280=m
 CONFIG_PWM_BCM2835=m
 CONFIG_PWM_PCA9685=m
+CONFIG_RPI_AXIPERF=m
 CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y

diff --git a/arch/arm/configs/bcmrpi_defconfig b/arch/arm/configs/bcmrpi_defconfig
@@ -1185,6 +1185,7 @@ CONFIG_INV_MPU6050_I2C=m
 CONFIG_BMP280=m
 CONFIG_PWM_BCM2835=m
 CONFIG_PWM_PCA9685=m
+CONFIG_RPI_AXIPERF=m
 CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y

diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
@@ -43,4 +43,11 @@ config XGENE_PMU
         help
           Say y if you want to use APM X-Gene SoC performance monitors.
 
+config RPI_AXIPERF
+        depends on ARCH_BCM2835
+        tristate "RaspberryPi AXI Performance monitors"
+        default n
+        help
+          Say y if you want to use Raspberry Pi AXI performance monitors, m if
+          you want to build it as a module.
 endmenu
diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_ARM_PMU_ACPI) += arm_pmu_acpi.o
 obj-$(CONFIG_QCOM_L2_PMU)	+= qcom_l2_pmu.o
 obj-$(CONFIG_QCOM_L3_PMU) += qcom_l3_pmu.o
 obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
+obj-$(CONFIG_RPI_AXIPERF) += raspberrypi_axi_monitor.o