Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

where is irqs.h #1772

Closed
mayur-who opened this issue Dec 27, 2016 · 4 comments
Closed

where is irqs.h #1772

mayur-who opened this issue Dec 27, 2016 · 4 comments

Comments

@mayur-who
Copy link

where is mach/irqs.h for bcm2708/9
@pelwell
Copy link
Contributor

pelwell commented Dec 27, 2016

All irqs should be allocated via Device Tree now. What are you trying to build?

@mayur-who
Copy link
Author

mayur-who commented Dec 27, 2016 •
edited
Loading

I already developed a character device driver which uses gpio bit banging along with the timer interrupts, so earlier in my code I was using request_irq method and pass IRQ_TIMER1 and IRQ_TIMER3. But now it is throwing error as it is undefined.

Is there any way that I could get around to it

@pelwell
Copy link
Contributor

pelwell commented Dec 27, 2016

Have a look at the i2c-gpio driver - it should be a good example of the current way to handle gpios and interrupts. If that is too high level, try pinctrl-bcm2835 (https://github.com/raspberrypi/linux/blob/rpi-4.4.y/drivers/pinctrl/bcm/pinctrl-bcm2835.c).

@pelwell pelwell mentioned this issue Dec 27, 2016
Closed
@Ruffio
Copy link

Ruffio commented Feb 5, 2017

@mayurcools can this be closed?

popcornmix pushed a commit that referenced this issue Dec 16, 2024
@kvalo @gregkh
wifi: ath12k: fix atomic calls in ath12k_mac_op_set_bitrate_mask()
2093f06 
[ Upstream commit 8fac326 ]

When I try to manually set bitrates:

iw wlan0 set bitrates legacy-2.4 1

I get sleeping from invalid context error, see below. Fix that by switching to
use recently introduced ieee80211_iterate_stations_mtx().

Do note that WCN6855 firmware is still crashing, I'm not sure if that firmware
even supports bitrate WMI commands and should we consider disabling
ath12k_mac_op_set_bitrate_mask() for WCN6855? But that's for another patch.

BUG: sleeping function called from invalid context at drivers/net/wireless/ath/ath12k/wmi.c:420
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 2236, name: iw
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
3 locks held by iw/2236:
 #0: ffffffffabc6f1d8 (cb_lock){++++}-{3:3}, at: genl_rcv+0x14/0x40
 #1: ffff888138410810 (&rdev->wiphy.mtx){+.+.}-{3:3}, at: nl80211_pre_doit+0x54d/0x800 [cfg80211]
 #2: ffffffffab2cfaa0 (rcu_read_lock){....}-{1:2}, at: ieee80211_iterate_stations_atomic+0x2f/0x200 [mac80211]
CPU: 3 UID: 0 PID: 2236 Comm: iw Not tainted 6.11.0-rc7-wt-ath+ #1772
Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021
Call Trace:
 <TASK>
 dump_stack_lvl+0xa4/0xe0
 dump_stack+0x10/0x20
 __might_resched+0x363/0x5a0
 ? __alloc_skb+0x165/0x340
 __might_sleep+0xad/0x160
 ath12k_wmi_cmd_send+0xb1/0x3d0 [ath12k]
 ? ath12k_wmi_init_wcn7850+0xa40/0xa40 [ath12k]
 ? __netdev_alloc_skb+0x45/0x7b0
 ? __asan_memset+0x39/0x40
 ? ath12k_wmi_alloc_skb+0xf0/0x150 [ath12k]
 ? reacquire_held_locks+0x4d0/0x4d0
 ath12k_wmi_set_peer_param+0x340/0x5b0 [ath12k]
 ath12k_mac_disable_peer_fixed_rate+0xa3/0x110 [ath12k]
 ? ath12k_mac_vdev_stop+0x4f0/0x4f0 [ath12k]
 ieee80211_iterate_stations_atomic+0xd4/0x200 [mac80211]
 ath12k_mac_op_set_bitrate_mask+0x5d2/0x1080 [ath12k]
 ? ath12k_mac_vif_chan+0x320/0x320 [ath12k]
 drv_set_bitrate_mask+0x267/0x470 [mac80211]
 ieee80211_set_bitrate_mask+0x4cc/0x8a0 [mac80211]
 ? __this_cpu_preempt_check+0x13/0x20
 nl80211_set_tx_bitrate_mask+0x2bc/0x530 [cfg80211]
 ? nl80211_parse_tx_bitrate_mask+0x2320/0x2320 [cfg80211]
 ? trace_contention_end+0xef/0x140
 ? rtnl_unlock+0x9/0x10
 ? nl80211_pre_doit+0x557/0x800 [cfg80211]
 genl_family_rcv_msg_doit+0x1f0/0x2e0
 ? genl_family_rcv_msg_attrs_parse.isra.0+0x250/0x250
 ? ns_capable+0x57/0xd0
 genl_family_rcv_msg+0x34c/0x600
 ? genl_family_rcv_msg_dumpit+0x310/0x310
 ? __lock_acquire+0xc62/0x1de0
 ? he_set_mcs_mask.isra.0+0x8d0/0x8d0 [cfg80211]
 ? nl80211_parse_tx_bitrate_mask+0x2320/0x2320 [cfg80211]
 ? cfg80211_external_auth_request+0x690/0x690 [cfg80211]
 genl_rcv_msg+0xa0/0x130
 netlink_rcv_skb+0x14c/0x400
 ? genl_family_rcv_msg+0x600/0x600
 ? netlink_ack+0xd70/0xd70
 ? rwsem_optimistic_spin+0x4f0/0x4f0
 ? genl_rcv+0x14/0x40
 ? down_read_killable+0x580/0x580
 ? netlink_deliver_tap+0x13e/0x350
 ? __this_cpu_preempt_check+0x13/0x20
 genl_rcv+0x23/0x40
 netlink_unicast+0x45e/0x790
 ? netlink_attachskb+0x7f0/0x7f0
 netlink_sendmsg+0x7eb/0xdb0
 ? netlink_unicast+0x790/0x790
 ? __this_cpu_preempt_check+0x13/0x20
 ? selinux_socket_sendmsg+0x31/0x40
 ? netlink_unicast+0x790/0x790
 __sock_sendmsg+0xc9/0x160
 ____sys_sendmsg+0x620/0x990
 ? kernel_sendmsg+0x30/0x30
 ? __copy_msghdr+0x410/0x410
 ? __kasan_check_read+0x11/0x20
 ? mark_lock+0xe6/0x1470
 ___sys_sendmsg+0xe9/0x170
 ? copy_msghdr_from_user+0x120/0x120
 ? __lock_acquire+0xc62/0x1de0
 ? do_fault_around+0x2c6/0x4e0
 ? do_user_addr_fault+0x8c1/0xde0
 ? reacquire_held_locks+0x220/0x4d0
 ? do_user_addr_fault+0x8c1/0xde0
 ? __kasan_check_read+0x11/0x20
 ? __fdget+0x4e/0x1d0
 ? sockfd_lookup_light+0x1a/0x170
 __sys_sendmsg+0xd2/0x180
 ? __sys_sendmsg_sock+0x20/0x20
 ? reacquire_held_locks+0x4d0/0x4d0
 ? debug_smp_processor_id+0x17/0x20
 __x64_sys_sendmsg+0x72/0xb0
 ? lockdep_hardirqs_on+0x7d/0x100
 x64_sys_call+0x894/0x9f0
 do_syscall_64+0x64/0x130
 entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f230fe04807
Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
RSP: 002b:00007ffe996a7ea8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000556f9f9c3390 RCX: 00007f230fe04807
RDX: 0000000000000000 RSI: 00007ffe996a7ee0 RDI: 0000000000000003
RBP: 0000556f9f9c88c0 R08: 0000000000000002 R09: 0000000000000000
R10: 0000556f965ca190 R11: 0000000000000246 R12: 0000556f9f9c8780
R13: 00007ffe996a7ee0 R14: 0000556f9f9c87d0 R15: 0000556f9f9c88c0
 </TASK>

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241007165932.78081-2-kvalo@kernel.org
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
3 participants
@Ruffio @mayur-who @pelwell