Power management #23

nomis · 2012-05-16T22:28:37Z

Could you clarify which devices can be powered on or off?

It looks like only the bits for the SD card and USB host have any effect. USB is currently left powered on all the time, so is there any significant benefit to powering down the SD card? Can USB be powered down with devices attached or will they be reset when this happens? (Linux can can handle determining when it is safe to do this.)

There appears to be no way to query for what is currently powered on so I can't see this integrating well with the kernel's power management unless everything is turned off at boot, otherwise as soon as one of either the SD or USB host devices is registered it's going to turn that on and turn everything else off.

I'm able to send any of bits 0..27 set to 1 to the power mailbox channel and it'll respond with the list of powered devices. Sending all bits 0 results in no response. Is there anything else I've missed available in its API? Is everything off at boot? It has just loaded everything from the SD card so that may still be powered on.

popcornmix · 2012-05-17T10:33:24Z

From Phil who wrote this code:
"The SD Card is powered off to save power. In practice the ARM keeps USB power on, but the interface allows it to be powered off.

The bits in use are SDCARD (bit 0) and USB (bit 3). The ARM keeps track of what it is requesting. The ARM must wait for something to be powered up before using it, so VC sends a response indicating the power state when something is powered up, otherwise it doesn’t bother so that the ARM doesn’t have to wait."

So, GPU won't power off devices without ARM telling it to, so ARM can keep track of what the current state is.
If needed I could add a way of querying the state (e.g. bit=31 set means return current state).

Note: you only get a response (of the new state) when transitioning something from off->on. If nothing is newly switched on, there is no response.

nomis · 2012-05-17T11:39:59Z

It can only keep track of the state if it sent the last power request - on powerup it's not clear what the current state is.

Bit 31 (with all other bits set to 0 - reserved for future use) to query the current state would be useful. Even if the kernel assumes that the power should be all off on boot this might be inconvenient in the future. By "the ARM" don't you really mean whatever is running on it, such as the Linux kernel?

This still doesn't tell me if/when I can safely power off USB... would it be possible (ignoring the ethernet device) to power down USB when nothing is connected without breaking any state in the USB host?

popcornmix · 2012-05-17T11:47:02Z

I would have thought you can't power off USB without cooperation from the linux dwc_otg driver. It will need to set registers to sensible values after power on.
Possibly by using suspend/resume, power management, or removing/adding module it could be persuaded to work but that is beyond my knowledge (dwc_otg was written by synopsys).

nomis · 2012-05-17T11:52:32Z

I'm assuming co-operation from the other areas of the kernel managing the device being powered off.

If you could add a bit 31 query option it'll make the logic easier and I'll do some testing by adding device suspend/resume to the 3.1.9 dwc_otg code to see if anything still works after power management.

(Given that it's only two devices it's tempting to just power them both on all the time and avoid the complication)

popcornmix · 2012-05-17T17:24:20Z

Updated firmware should support bit 31 to query power state.

nomis · 2012-05-17T23:57:16Z

Thanks, currently I'm powering on both devices on boot but the support is there to be able to turn them on and off when the mmc/usb drivers are added.

Following commit a79dd5a titled "tty/serial/pmac_zilog: Fix suspend & resume", my Powerbook G4 Titanium showed the following stack dump: [ 36.878225] irq 23: nobody cared (try booting with the "irqpoll" option) [ 36.878251] Call Trace: [ 36.878291] [dfff3f00] [c000984c] show_stack+0x7c/0x194 (unreliable) [ 36.878322] [dfff3f40] [c00a6868] __report_bad_irq+0x44/0xf4 [ 36.878339] [dfff3f60] [c00a6b04] note_interrupt+0x1ec/0x2ac [ 36.878356] [dfff3f80] [c00a48d0] handle_irq_event_percpu+0x250/0x2b8 [ 36.878372] [dfff3fd0] [c00a496c] handle_irq_event+0x34/0x54 [ 36.878389] [dfff3fe0] [c00a753c] handle_fasteoi_irq+0xb4/0x124 [ 36.878412] [dfff3ff0] [c000f5bc] call_handle_irq+0x18/0x28 [ 36.878428] [deef1f10] [c000719c] do_IRQ+0x114/0x1cc [ 36.878446] [deef1f40] [c0015868] ret_from_except+0x0/0x1c [ 36.878484] --- Exception: 501 at 0xf497610 [ 36.878489] LR = 0xfdc3dd0 [ 36.878497] handlers: [ 36.878510] [<c02b7424>] pmz_interrupt [ 36.878520] Disabling IRQ raspberrypi#23 From an E-mail exchange about this problem, Andreas Schwab noticed a typo that resulted in the wrong condition being tested. The patch also corrects 2 typos that incorrectly report why an error branch is being taken. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

…d reasons commit 5cf02d0 upstream. We've had some reports of a deadlock where rpciod ends up with a stack trace like this: PID: 2507 TASK: ffff88103691ab40 CPU: 14 COMMAND: "rpciod/14" #0 [ffff8810343bf2f0] schedule at ffffffff814dabd9 raspberrypi#1 [ffff8810343bf3b8] nfs_wait_bit_killable at ffffffffa038fc04 [nfs] raspberrypi#2 [ffff8810343bf3c8] __wait_on_bit at ffffffff814dbc2f raspberrypi#3 [ffff8810343bf418] out_of_line_wait_on_bit at ffffffff814dbcd8 raspberrypi#4 [ffff8810343bf488] nfs_commit_inode at ffffffffa039e0c1 [nfs] raspberrypi#5 [ffff8810343bf4f8] nfs_release_page at ffffffffa038bef6 [nfs] raspberrypi#6 [ffff8810343bf528] try_to_release_page at ffffffff8110c670 raspberrypi#7 [ffff8810343bf538] shrink_page_list.clone.0 at ffffffff81126271 raspberrypi#8 [ffff8810343bf668] shrink_inactive_list at ffffffff81126638 raspberrypi#9 [ffff8810343bf818] shrink_zone at ffffffff8112788f raspberrypi#10 [ffff8810343bf8c8] do_try_to_free_pages at ffffffff81127b1e raspberrypi#11 [ffff8810343bf958] try_to_free_pages at ffffffff8112812f raspberrypi#12 [ffff8810343bfa08] __alloc_pages_nodemask at ffffffff8111fdad raspberrypi#13 [ffff8810343bfb28] kmem_getpages at ffffffff81159942 raspberrypi#14 [ffff8810343bfb58] fallback_alloc at ffffffff8115a55a raspberrypi#15 [ffff8810343bfbd8] ____cache_alloc_node at ffffffff8115a2d9 raspberrypi#16 [ffff8810343bfc38] kmem_cache_alloc at ffffffff8115b09b raspberrypi#17 [ffff8810343bfc78] sk_prot_alloc at ffffffff81411808 raspberrypi#18 [ffff8810343bfcb8] sk_alloc at ffffffff8141197c raspberrypi#19 [ffff8810343bfce8] inet_create at ffffffff81483ba6 raspberrypi#20 [ffff8810343bfd38] __sock_create at ffffffff8140b4a7 raspberrypi#21 [ffff8810343bfd98] xs_create_sock at ffffffffa01f649b [sunrpc] raspberrypi#22 [ffff8810343bfdd8] xs_tcp_setup_socket at ffffffffa01f6965 [sunrpc] raspberrypi#23 [ffff8810343bfe38] worker_thread at ffffffff810887d0 raspberrypi#24 [ffff8810343bfee8] kthread at ffffffff8108dd96 raspberrypi#25 [ffff8810343bff48] kernel_thread at ffffffff8100c1ca rpciod is trying to allocate memory for a new socket to talk to the server. The VM ends up calling ->releasepage to get more memory, and it tries to do a blocking commit. That commit can't succeed however without a connected socket, so we deadlock. Fix this by setting PF_FSTRANS on the workqueue task prior to doing the socket allocation, and having nfs_release_page check for that flag when deciding whether to do a commit call. Also, set PF_FSTRANS unconditionally in rpc_async_schedule since that function can also do allocations sometimes. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Printing the "start_ip" for every secondary cpu is very noisy on a large system - and doesn't add any value. Drop this message. Console log before: Booting Node 0, Processors #1 smpboot cpu 1: start_ip = 96000 #2 smpboot cpu 2: start_ip = 96000 #3 smpboot cpu 3: start_ip = 96000 #4 smpboot cpu 4: start_ip = 96000 ... #31 smpboot cpu 31: start_ip = 96000 Brought up 32 CPUs Console log after: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok. Booting Node 1, Processors #8 #9 #10 #11 #12 #13 #14 #15 Ok. Booting Node 0, Processors #16 #17 #18 #19 #20 #21 #22 #23 Ok. Booting Node 1, Processors #24 #25 #26 #27 #28 #29 #30 #31 Brought up 32 CPUs Acked-by: Borislav Petkov <bp@amd64.org> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/4f452eb42507460426@agluck-desktop.sc.intel.com Signed-off-by: H. Peter Anvin <hpa@zytor.com>

This patch converts the remaining struct se_portal_group->session_lock usage to use irqsave+irqrestore to address the following warnings for hardware target mode interrupt context usage. This change generate other warnings for current iscsi-target mode still using ->session_lock with spin_lock_bh, which will need to be converted in a seperate patch. [ 492.480728] [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] [ 492.488194] 3.0.0+ #23 [ 492.490820] ------------------------------------------------------ [ 492.497704] sh/7162 [HC0[0]:SC0[2]:HE0:SE0] is trying to acquire: [ 492.504493] (&(&se_tpg->session_lock)->rlock){+.....}, at: [<ffffffffa022364d>] transport_deregister_session+0x2d/0x163 [target_core_mod] 492.518390] [ 492.518390] and this task is already holding: [ 492.524897] (&(&ha->hardware_lock)->rlock){-.-...}, at: [<ffffffffa00b9146>] qla_tgt_stop_phase1+0x5e/0x27e [qla2xxx] [ 492.536856] which would create a new lock dependency: [ 492.542481] (&(&ha->hardware_lock)->rlock){-.-...} -> (&(&se_tpg->session_lock)->rlock){+.....} [ 492.552321] [ 492.552321] but this new dependency connects a HARDIRQ-irq-safe lock: [ 492.561149] (&(&ha->hardware_lock)->rlock){-.-...} [ 492.566400] ... which became HARDIRQ-irq-safe at: [ 492.571841] [<ffffffff81064720>] __lock_acquire+0x68f/0x921 [ 492.578247] [<ffffffff81064eff>] lock_acquire+0xe0/0x10d [ 492.584367] [<ffffffff813a74c6>] _raw_spin_lock_irqsave+0x44/0x56 [ 492.591358] [<ffffffffa009b1be>] qla24xx_msix_default+0x5c/0x2aa [qla2xxx] [ 492.599227] [<ffffffff81088582>] handle_irq_event_percpu+0x5a/0x197 [ 492.606413] [<ffffffff810886fb>] handle_irq_event+0x3c/0x5c [ 492.612822] [<ffffffff8108a6dc>] handle_edge_irq+0xcc/0xf1 [ 492.619138] [<ffffffff810039b9>] handle_irq+0x83/0x8e [ 492.624971] [<ffffffff8100333e>] do_IRQ+0x48/0xaf [ 492.630413] [<ffffffff813a7cd3>] ret_from_intr+0x0/0x1a [ 492.636437] [<ffffffff81001dc1>] cpu_idle+0x5b/0x8d [ 492.642073] [<ffffffff81392709>] rest_init+0xad/0xb4 [ 492.647809] [<ffffffff81a1cbbc>] start_kernel+0x366/0x371 [ 492.654030] [<ffffffff81a1c2b1>] x86_64_start_reservations+0xb8/0xbc [ 492.661311] [<ffffffff81a1c3b6>] x86_64_start_kernel+0x101/0x110 [ 492.668204] [ 492.668205] to a HARDIRQ-irq-unsafe lock: [ 492.674324] (&(&se_tpg->session_lock)->rlock){+.....} [ 492.679862] ... which became HARDIRQ-irq-unsafe at: [ 492.685497] ... [<ffffffff8106479a>] __lock_acquire+0x709/0x921 [ 492.692209] [<ffffffff81064eff>] lock_acquire+0xe0/0x10d [ 492.698330] [<ffffffff813a75ed>] _raw_spin_lock_bh+0x31/0x40 [ 492.704836] [<ffffffffa021c208>] core_tpg_del_initiator_node_acl+0x89/0x336 [target_core_mod] [ 492.714546] [<ffffffffa02fb075>] tcm_qla2xxx_drop_nodeacl+0x20/0x2d [tcm_qla2xxx] [ 492.723087] [<ffffffffa02108d9>] target_fabric_nacl_base_release+0x22/0x24 [target_core_mod] [ 492.732698] [<ffffffffa01661c8>] config_item_release+0x7d/0xa3 [configfs] [ 492.740465] [<ffffffff811d48fe>] kref_put+0x43/0x4d [ 492.746101] [<ffffffffa0166149>] config_item_put+0x19/0x1b [configfs] [ 492.753481] [<ffffffffa0164987>] configfs_rmdir+0x1eb/0x258 [configfs] [ 492.760957] [<ffffffff810ecc54>] vfs_rmdir+0x79/0xd0 [ 492.766690] [<ffffffff810eec4a>] do_rmdir+0xc2/0x111 [ 492.772423] [<ffffffff810eecd0>] sys_rmdir+0x11/0x13 [ 492.778156] [<ffffffff813ae4d2>] system_call_fastpath+0x16/0x1b [ 492.784953] Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

The warning below triggers on AMD MCM packages because physical package IDs on the cores of a _physical_ socket are the same. I.e., this field says which CPUs belong to the same physical package. However, the same two CPUs belong to two different internal, i.e. "logical" nodes in the same physical socket which is reflected in the CPU-to-node map on x86 with NUMA. Which makes this check wrong on the above topologies so circumvent it. [ 0.444413] Booting Node 0, Processors #1 #2 #3 #4 #5 Ok. [ 0.461388] ------------[ cut here ]------------ [ 0.465997] WARNING: at arch/x86/kernel/smpboot.c:310 topology_sane.clone.1+0x6e/0x81() [ 0.473960] Hardware name: Dinar [ 0.477170] sched: CPU #6's mc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency. [ 0.486860] Booting Node 1, Processors #6 [ 0.491104] Modules linked in: [ 0.494141] Pid: 0, comm: swapper/6 Not tainted 3.4.0+ #1 [ 0.499510] Call Trace: [ 0.501946] [<ffffffff8144bf92>] ? topology_sane.clone.1+0x6e/0x81 [ 0.508185] [<ffffffff8102f1fc>] warn_slowpath_common+0x85/0x9d [ 0.514163] [<ffffffff8102f2b7>] warn_slowpath_fmt+0x46/0x48 [ 0.519881] [<ffffffff8144bf92>] topology_sane.clone.1+0x6e/0x81 [ 0.525943] [<ffffffff8144c234>] set_cpu_sibling_map+0x251/0x371 [ 0.532004] [<ffffffff8144c4ee>] start_secondary+0x19a/0x218 [ 0.537729] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.628197] #7 #8 #9 #10 #11 Ok. [ 0.807108] Booting Node 3, Processors #12 #13 #14 #15 #16 #17 Ok. [ 0.897587] Booting Node 2, Processors #18 #19 #20 #21 #22 #23 Ok. [ 0.917443] Brought up 24 CPUs We ran a topology sanity check test we have here on it and it all looks ok... hopefully :). Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120529135442.GE29157@aftab.osrc.amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>

…d reasons We've had some reports of a deadlock where rpciod ends up with a stack trace like this: PID: 2507 TASK: ffff88103691ab40 CPU: 14 COMMAND: "rpciod/14" #0 [ffff8810343bf2f0] schedule at ffffffff814dabd9 #1 [ffff8810343bf3b8] nfs_wait_bit_killable at ffffffffa038fc04 [nfs] #2 [ffff8810343bf3c8] __wait_on_bit at ffffffff814dbc2f #3 [ffff8810343bf418] out_of_line_wait_on_bit at ffffffff814dbcd8 #4 [ffff8810343bf488] nfs_commit_inode at ffffffffa039e0c1 [nfs] #5 [ffff8810343bf4f8] nfs_release_page at ffffffffa038bef6 [nfs] #6 [ffff8810343bf528] try_to_release_page at ffffffff8110c670 #7 [ffff8810343bf538] shrink_page_list.clone.0 at ffffffff81126271 #8 [ffff8810343bf668] shrink_inactive_list at ffffffff81126638 #9 [ffff8810343bf818] shrink_zone at ffffffff8112788f #10 [ffff8810343bf8c8] do_try_to_free_pages at ffffffff81127b1e #11 [ffff8810343bf958] try_to_free_pages at ffffffff8112812f #12 [ffff8810343bfa08] __alloc_pages_nodemask at ffffffff8111fdad #13 [ffff8810343bfb28] kmem_getpages at ffffffff81159942 #14 [ffff8810343bfb58] fallback_alloc at ffffffff8115a55a #15 [ffff8810343bfbd8] ____cache_alloc_node at ffffffff8115a2d9 #16 [ffff8810343bfc38] kmem_cache_alloc at ffffffff8115b09b #17 [ffff8810343bfc78] sk_prot_alloc at ffffffff81411808 #18 [ffff8810343bfcb8] sk_alloc at ffffffff8141197c #19 [ffff8810343bfce8] inet_create at ffffffff81483ba6 #20 [ffff8810343bfd38] __sock_create at ffffffff8140b4a7 #21 [ffff8810343bfd98] xs_create_sock at ffffffffa01f649b [sunrpc] #22 [ffff8810343bfdd8] xs_tcp_setup_socket at ffffffffa01f6965 [sunrpc] #23 [ffff8810343bfe38] worker_thread at ffffffff810887d0 #24 [ffff8810343bfee8] kthread at ffffffff8108dd96 #25 [ffff8810343bff48] kernel_thread at ffffffff8100c1ca rpciod is trying to allocate memory for a new socket to talk to the server. The VM ends up calling ->releasepage to get more memory, and it tries to do a blocking commit. That commit can't succeed however without a connected socket, so we deadlock. Fix this by setting PF_FSTRANS on the workqueue task prior to doing the socket allocation, and having nfs_release_page check for that flag when deciding whether to do a commit call. Also, set PF_FSTRANS unconditionally in rpc_async_schedule since that function can also do allocations sometimes. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org

commit db4efbb upstream. The driver uses platform_driver_probe() to obtain platform data if any. However, that function is placed in the .init section so it must be called upon driver module initialization. The problem was reported by Fenguang Wu resulting in a kernel oops because the .init section was already freed. [ 48.966342] Switched to clocksource tsc [ 48.970002] kernel tried to execute NX-protected page - exploit attempt? (uid: 0) [ 48.970851] BUG: unable to handle kernel paging request at ffffffff82196446 [ 48.970957] IP: [<ffffffff82196446>] classes_init+0x26/0x26 [ 48.970957] PGD 1e76067 PUD 1e77063 PMD f388063 PTE 8000000002196163 [ 48.970957] Oops: 0011 [#1] [ 48.970957] CPU: 0 PID: 17 Comm: kworker/0:1 Not tainted 3.11.0-rc7-00444-gc52dd7f #23 [ 48.970957] Workqueue: events brcmf_driver_init [ 48.970957] task: ffff8800001d2000 ti: ffff8800001d4000 task.ti: ffff8800001d4000 [ 48.970957] RIP: 0010:[<ffffffff82196446>] [<ffffffff82196446>] classes_init+0x26/0x26 [ 48.970957] RSP: 0000:ffff8800001d5d40 EFLAGS: 00000286 [ 48.970957] RAX: 0000000000000001 RBX: ffffffff820c5620 RCX: 0000000000000000 [ 48.970957] RDX: 0000000000000001 RSI: ffffffff816f7380 RDI: ffffffff820c56c0 [ 48.970957] RBP: ffff8800001d5d50 R08: ffff8800001d2508 R09: 0000000000000002 [ 48.970957] R10: 0000000000000000 R11: 0001f7ce298c5620 R12: ffff8800001c76b0 [ 48.970957] R13: ffffffff81e91d40 R14: 0000000000000000 R15: ffff88000e0ce300 [ 48.970957] FS: 0000000000000000(0000) GS:ffffffff81e84000(0000) knlGS:0000000000000000 [ 48.970957] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 48.970957] CR2: ffffffff82196446 CR3: 0000000001e75000 CR4: 00000000000006b0 [ 48.970957] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 48.970957] DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 [ 48.970957] Stack: [ 48.970957] ffffffff816f7df8 ffffffff820c5620 ffff8800001d5d60 ffffffff816eeec9 [ 48.970957] ffff8800001d5de0 ffffffff81073dc5 ffffffff81073d68 ffff8800001d5db8 [ 48.970957] 0000000000000086 ffffffff820c5620 ffffffff824f7fd0 0000000000000000 [ 48.970957] Call Trace: [ 48.970957] [<ffffffff816f7df8>] ? brcmf_sdio_init+0x18/0x70 [ 48.970957] [<ffffffff816eeec9>] brcmf_driver_init+0x9/0x10 [ 48.970957] [<ffffffff81073dc5>] process_one_work+0x1d5/0x480 [ 48.970957] [<ffffffff81073d68>] ? process_one_work+0x178/0x480 [ 48.970957] [<ffffffff81074188>] worker_thread+0x118/0x3a0 [ 48.970957] [<ffffffff81074070>] ? process_one_work+0x480/0x480 [ 48.970957] [<ffffffff8107aa17>] kthread+0xe7/0xf0 [ 48.970957] [<ffffffff810829f7>] ? finish_task_switch.constprop.57+0x37/0xd0 [ 48.970957] [<ffffffff8107a930>] ? __kthread_parkme+0x80/0x80 [ 48.970957] [<ffffffff81a6923a>] ret_from_fork+0x7a/0xb0 [ 48.970957] [<ffffffff8107a930>] ? __kthread_parkme+0x80/0x80 [ 48.970957] Code: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc <cc> cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc [ 48.970957] RIP [<ffffffff82196446>] classes_init+0x26/0x26 [ 48.970957] RSP <ffff8800001d5d40> [ 48.970957] CR2: ffffffff82196446 [ 48.970957] ---[ end trace 62980817cd525f14 ]--- Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When booting secondary CPUs, announce_cpu() is called to show which cpu has been brought up. For example: [ 0.402751] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 OK [ 0.525667] smpboot: Booting Node 1, Processors #6 #7 #8 #9 #10 #11 OK [ 0.755592] smpboot: Booting Node 0, Processors #12 #13 #14 #15 #16 #17 OK [ 0.890495] smpboot: Booting Node 1, Processors #18 #19 #20 #21 #22 #23 But the last "OK" is lost, because 'nr_cpu_ids-1' represents the maximum possible cpu id. It should use the maximum present cpu id in case not all CPUs booted up. Signed-off-by: Libin <huawei.libin@huawei.com> Cc: <guohanjun@huawei.com> Cc: <wangyijing@huawei.com> Cc: <fenghua.yu@intel.com> Cc: <paul.gortmaker@windriver.com> Link: http://lkml.kernel.org/r/1378378676-18276-1-git-send-email-huawei.libin@huawei.com [ tweaked the changelog, removed unnecessary line break, tweaked the format to align the fields vertically. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>

The driver uses platform_driver_probe() to obtain platform data if any. However, that function is placed in the .init section so it must be called upon driver module initialization. The problem was reported by Fenguang Wu resulting in a kernel oops because the .init section was already freed. [ 48.966342] Switched to clocksource tsc [ 48.970002] kernel tried to execute NX-protected page - exploit attempt? (uid: 0) [ 48.970851] BUG: unable to handle kernel paging request at ffffffff82196446 [ 48.970957] IP: [<ffffffff82196446>] classes_init+0x26/0x26 [ 48.970957] PGD 1e76067 PUD 1e77063 PMD f388063 PTE 8000000002196163 [ 48.970957] Oops: 0011 [#1] [ 48.970957] CPU: 0 PID: 17 Comm: kworker/0:1 Not tainted 3.11.0-rc7-00444-gc52dd7f #23 [ 48.970957] Workqueue: events brcmf_driver_init [ 48.970957] task: ffff8800001d2000 ti: ffff8800001d4000 task.ti: ffff8800001d4000 [ 48.970957] RIP: 0010:[<ffffffff82196446>] [<ffffffff82196446>] classes_init+0x26/0x26 [ 48.970957] RSP: 0000:ffff8800001d5d40 EFLAGS: 00000286 [ 48.970957] RAX: 0000000000000001 RBX: ffffffff820c5620 RCX: 0000000000000000 [ 48.970957] RDX: 0000000000000001 RSI: ffffffff816f7380 RDI: ffffffff820c56c0 [ 48.970957] RBP: ffff8800001d5d50 R08: ffff8800001d2508 R09: 0000000000000002 [ 48.970957] R10: 0000000000000000 R11: 0001f7ce298c5620 R12: ffff8800001c76b0 [ 48.970957] R13: ffffffff81e91d40 R14: 0000000000000000 R15: ffff88000e0ce300 [ 48.970957] FS: 0000000000000000(0000) GS:ffffffff81e84000(0000) knlGS:0000000000000000 [ 48.970957] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 48.970957] CR2: ffffffff82196446 CR3: 0000000001e75000 CR4: 00000000000006b0 [ 48.970957] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 48.970957] DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 [ 48.970957] Stack: [ 48.970957] ffffffff816f7df8 ffffffff820c5620 ffff8800001d5d60 ffffffff816eeec9 [ 48.970957] ffff8800001d5de0 ffffffff81073dc5 ffffffff81073d68 ffff8800001d5db8 [ 48.970957] 0000000000000086 ffffffff820c5620 ffffffff824f7fd0 0000000000000000 [ 48.970957] Call Trace: [ 48.970957] [<ffffffff816f7df8>] ? brcmf_sdio_init+0x18/0x70 [ 48.970957] [<ffffffff816eeec9>] brcmf_driver_init+0x9/0x10 [ 48.970957] [<ffffffff81073dc5>] process_one_work+0x1d5/0x480 [ 48.970957] [<ffffffff81073d68>] ? process_one_work+0x178/0x480 [ 48.970957] [<ffffffff81074188>] worker_thread+0x118/0x3a0 [ 48.970957] [<ffffffff81074070>] ? process_one_work+0x480/0x480 [ 48.970957] [<ffffffff8107aa17>] kthread+0xe7/0xf0 [ 48.970957] [<ffffffff810829f7>] ? finish_task_switch.constprop.57+0x37/0xd0 [ 48.970957] [<ffffffff8107a930>] ? __kthread_parkme+0x80/0x80 [ 48.970957] [<ffffffff81a6923a>] ret_from_fork+0x7a/0xb0 [ 48.970957] [<ffffffff8107a930>] ? __kthread_parkme+0x80/0x80 [ 48.970957] Code: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc <cc> cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc [ 48.970957] RIP [<ffffffff82196446>] classes_init+0x26/0x26 [ 48.970957] RSP <ffff8800001d5d40> [ 48.970957] CR2: ffffffff82196446 [ 48.970957] ---[ end trace 62980817cd525f14 ]--- Cc: <stable@vger.kernel.org> # 3.10.x, 3.11.x Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>

commit d206dcf upstream. When changing group_thread_cnt from sysfs entry, the kernel can oops. The kernel messages are: [ 740.961389] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 740.961444] IP: [<ffffffff81062570>] process_one_work+0x30/0x500 [ 740.961476] PGD b9013067 PUD b651e067 PMD 0 [ 740.961503] Oops: 0000 [#1] SMP [ 740.961525] Modules linked in: netconsole e1000e ptp pps_core [ 740.961577] CPU: 0 PID: 3683 Comm: kworker/u8:5 Not tainted 3.12.0+ #23 [ 740.961602] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015 11/09/2011 [ 740.961646] task: ffff88013abe0000 ti: ffff88013a246000 task.ti: ffff88013a246000 [ 740.961673] RIP: 0010:[<ffffffff81062570>] [<ffffffff81062570>] process_one_work+0x30/0x500 [ 740.961708] RSP: 0018:ffff88013a247e08 EFLAGS: 00010086 [ 740.961730] RAX: ffff8800b912b400 RBX: ffff88013a61e680 RCX: ffff8800b912b400 [ 740.961757] RDX: ffff8800b912b600 RSI: ffff8800b912b600 RDI: ffff88013a61e680 [ 740.961782] RBP: ffff88013a247e48 R08: ffff88013a246000 R09: 000000000002c09d [ 740.961808] R10: 000000000000010f R11: 0000000000000000 R12: ffff88013b00cc00 [ 740.961833] R13: 0000000000000000 R14: ffff88013b00cf80 R15: ffff88013a61e6b0 [ 740.961861] FS: 0000000000000000(0000) GS:ffff88013fc00000(0000) knlGS:0000000000000000 [ 740.961893] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 740.962001] CR2: 00000000000000b8 CR3: 00000000b24fe000 CR4: 00000000000407f0 [ 740.962001] Stack: [ 740.962001] 0000000000000008 ffff8800b912b600 ffff88013b00cc00 ffff88013a61e680 [ 740.962001] ffff88013b00cc00 ffff88013b00cc18 ffff88013b00cf80 ffff88013a61e6b0 [ 740.962001] ffff88013a247eb8 ffffffff810639c6 0000000000012a80 ffff88013a247fd8 [ 740.962001] Call Trace: [ 740.962001] [<ffffffff810639c6>] worker_thread+0x206/0x3f0 [ 740.962001] [<ffffffff810637c0>] ? manage_workers+0x2c0/0x2c0 [ 740.962001] [<ffffffff81069656>] kthread+0xc6/0xd0 [ 740.962001] [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70 [ 740.962001] [<ffffffff81722ffc>] ret_from_fork+0x7c/0xb0 [ 740.962001] [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70 [ 740.962001] Code: 89 e5 41 57 41 56 41 55 45 31 ed 41 54 53 48 89 fb 48 83 ec 18 48 8b 06 4c 8b 67 48 48 89 c1 30 c9 a8 04 4c 0f 45 e9 80 7f 58 00 <49> 8b 45 08 44 8b b0 00 01 00 00 78 0c 41 f6 44 24 10 04 0f 84 [ 740.962001] RIP [<ffffffff81062570>] process_one_work+0x30/0x500 [ 740.962001] RSP <ffff88013a247e08> [ 740.962001] CR2: 0000000000000008 [ 740.962001] ---[ end trace 39181460000748de ]--- [ 740.962001] Kernel panic - not syncing: Fatal exception This can happen if there are some stripes left, fewer than MAX_STRIPE_BATCH. A worker is queued to handle them. But before calling raid5_do_work, raid5d handles those stripes making conf->active_stripe = 0. So mddev_suspend() can return. We might then free old worker resources before the queued raid5_do_work() handled them. When it runs, it crashes. raid5d() raid5_store_group_thread_cnt() queue_work mddev_suspend() handle_strips active_stripe=0 free(old worker resources) process_one_work raid5_do_work To avoid this, we should only flush the worker resources before freeing them. This fixes a bug introduced in 3.12 so is suitable for the 3.12.x stable series. Fixes: b721420 Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Shaohua Li <shli@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Claudiu Manoil says: ==================== gianfar: Tx timeout issue There's an older Tx timeout issue showing up on etsec2 devices with 2 CPUs. I pinned this issue down to processing overhead incurred by supporting multiple Tx/Rx rings, as explained in the 2nd patch below. But before this, there's also a concurency issue leading to Rx/Tx spurrious interrupts, addressed by the 'Tx NAPI' patch below. The Tx timeout can be triggered with multiple Tx flows, 'iperf -c -N 8' commands, on a 2 CPUs etsec2 based (P1020) board. Before the patches: """ root@p1020rdb-pc:~# iperf -c 172.16.1.3 -n 1000M -P 8 & [...] root@p1020rdb-pc:~# NETDEV WATCHDOG: eth1 (fsl-gianfar): transmit queue 1 timed out WARNING: at net/sched/sch_generic.c:279 Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.13.0-rc3-03386-g89ea59c #23 task: ed84ef40 ti: ed868000 task.ti: ed868000 NIP: c04627a8 LR: c04627a8 CTR: c02fb270 REGS: ed869d00 TRAP: 0700 Not tainted (3.13.0-rc3-03386-g89ea59c) MSR: 00029000 <CE,EE,ME> CR: 44000022 XER: 20000000 [...] root@p1020rdb-pc:~# [ ID] Interval Transfer Bandwidth [ 5] 0.0-19.3 sec 1000 MBytes 434 Mbits/sec [ 8] 0.0-39.7 sec 1000 MBytes 211 Mbits/sec [ 9] 0.0-40.1 sec 1000 MBytes 209 Mbits/sec [ 3] 0.0-40.2 sec 1000 MBytes 209 Mbits/sec [ 10] 0.0-59.0 sec 1000 MBytes 142 Mbits/sec [ 7] 0.0-74.6 sec 1000 MBytes 112 Mbits/sec [ 6] 0.0-74.7 sec 1000 MBytes 112 Mbits/sec [ 4] 0.0-74.7 sec 1000 MBytes 112 Mbits/sec [SUM] 0.0-74.7 sec 7.81 GBytes 898 Mbits/sec root@p1020rdb-pc:~# ifconfig eth1 eth1 Link encap:Ethernet HWaddr 00:04:9f:00:13:01 inet addr:172.16.1.1 Bcast:172.16.255.255 Mask:255.255.0.0 inet6 addr: fe80::204:9fff:fe00:1301/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:708722 errors:0 dropped:0 overruns:0 frame:0 TX packets:8717849 errors:6 dropped:0 overruns:1470 carrier:0 collisions:0 txqueuelen:1000 RX bytes:58118018 (55.4 MiB) TX bytes:274069482 (261.3 MiB) Base address:0xa000 """ After applying the patches: """ root@p1020rdb-pc:~# iperf -c 172.16.1.3 -n 1000M -P 8 & [...] root@p1020rdb-pc:~# [ ID] Interval Transfer Bandwidth [ 9] 0.0-70.5 sec 1000 MBytes 119 Mbits/sec [ 5] 0.0-70.5 sec 1000 MBytes 119 Mbits/sec [ 6] 0.0-70.7 sec 1000 MBytes 119 Mbits/sec [ 4] 0.0-71.0 sec 1000 MBytes 118 Mbits/sec [ 8] 0.0-71.1 sec 1000 MBytes 118 Mbits/sec [ 3] 0.0-71.2 sec 1000 MBytes 118 Mbits/sec [ 10] 0.0-71.3 sec 1000 MBytes 118 Mbits/sec [ 7] 0.0-71.3 sec 1000 MBytes 118 Mbits/sec [SUM] 0.0-71.3 sec 7.81 GBytes 942 Mbits/sec root@p1020rdb-pc:~# ifconfig eth1 eth1 Link encap:Ethernet HWaddr 00:04:9f:00:13:01 inet addr:172.16.1.1 Bcast:172.16.255.255 Mask:255.255.0.0 inet6 addr: fe80::204:9fff:fe00:1301/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:728446 errors:0 dropped:0 overruns:0 frame:0 TX packets:8690057 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:59732650 (56.9 MiB) TX bytes:271554306 (258.9 MiB) Base address:0xa000 """ v2: PATCH 2: Replaced CPP check with run-time condition to limit the number of queues. Updated comments. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

This is a workaround for a HW erratum on 82579 devices. Erratum is #23 in Intel 6 Series Chipset and Intel C200 Series Chipset specification Update June 2013. Problem: 82579 parts experience packet loss in Gig and 100 speeds when interconnect between PHY and MAC is exiting K1 power saving state. This was previously believed to only affect 1Gig speed, but has been observed at 100Mbs also. Workaround: Disable K1 for 82579 devices at Gig and 100 speeds. Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Key being hashed is unmapped using the digest size instead of initial length: caam_jr ffe301000.jr: DMA-API: device driver frees DMA memory with different size [device address=0x000000002eeedac0] [map size=80 bytes] [unmap size=20 bytes] ------------[ cut here ]------------ WARNING: at lib/dma-debug.c:1090 Modules linked in: caamhash(+) CPU: 0 PID: 1327 Comm: cryptomgr_test Not tainted 3.16.0-rc1 #23 task: eebda5d0 ti: ee26a000 task.ti: ee26a000 NIP: c0288790 LR: c0288790 CTR: c02d7020 REGS: ee26ba30 TRAP: 0700 Not tainted (3.16.0-rc1) MSR: 00021002 <CE,ME> CR: 44022082 XER: 00000000 GPR00: c0288790 ee26bae0 eebda5d0 0000009f c1de3478 c1de382c 00000000 00021002 GPR08: 00000007 00000000 01660000 0000012f 82022082 00000000 c07a1900 eeda29c0 GPR16: 00000000 c61deea0 000c49a0 00000260 c07e1e10 c0da1180 00029002 c0d9ef08 GPR24: c07a0000 c07a4acc ee26bb38 ee2765c0 00000014 ee130210 00000000 00000014 NIP [c0288790] check_unmap+0x640/0xab0 LR [c0288790] check_unmap+0x640/0xab0 Call Trace: [ee26bae0] [c0288790] check_unmap+0x640/0xab0 (unreliable) [ee26bb30] [c0288c78] debug_dma_unmap_page+0x78/0x90 [ee26bbb0] [f929c3d4] ahash_setkey+0x374/0x720 [caamhash] [ee26bc30] [c022fec8] __test_hash+0x228/0x6c0 [ee26bde0] [c0230388] test_hash+0x28/0xb0 [ee26be00] [c0230458] alg_test_hash+0x48/0xc0 [ee26be20] [c022fa94] alg_test+0x114/0x2e0 [ee26bea0] [c022cd1c] cryptomgr_test+0x4c/0x60 [ee26beb0] [c00497a4] kthread+0xc4/0xe0 [ee26bf40] [c000f2fc] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 41de03e8 83da0020 3c60c06d 83fa0024 3863f520 813b0020 815b0024 80fa0018 811a001c 93c10008 93e1000c 4830cf6d <0fe00000> 3c60c06d 3863f0f4 4830cf5d ---[ end trace db1fae088c75c26c ]--- Mapped at: [<f929c15c>] ahash_setkey+0xfc/0x720 [caamhash] [<c022fec8>] __test_hash+0x228/0x6c0 [<c0230388>] test_hash+0x28/0xb0 [<c0230458>] alg_test_hash+0x48/0xc0 [<c022fa94>] alg_test+0x114/0x2e0 Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

caam_jr ffe301000.jr: DMA-API: device driver frees DMA memory with different direction [device address=0x00000000062ad1ac] [size=28 bytes] [mapped with DMA_FROM_DEVICE] [unmapped with DMA_TO_DEVICE] ------------[ cut here ]------------ WARNING: at lib/dma-debug.c:1131 Modules linked in: caamhash(+) [last unloaded: caamhash] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.16.0-rc1 #23 task: c0789380 ti: effd2000 task.ti: c07d6000 NIP: c02885cc LR: c02885cc CTR: c02d7020 REGS: effd3d50 TRAP: 0700 Tainted: G W (3.16.0-rc1) MSR: 00021002 <CE,ME> CR: 44048082 XER: 00000000 GPR00: c02885cc effd3e00 c0789380 000000c6 c1de3478 c1de382c 00000000 00021002 GPR08: 00000007 00000000 01660000 0000012f 84048082 00000000 00000018 c07db080 GPR16: 00000006 00000100 0000002c eee567e0 c07e1e10 c0da1180 00029002 c0d96708 GPR24: c07a0000 c07a4acc effd3e58 ee29b140 0000001c ee130210 00000000 c0d96700 NIP [c02885cc] check_unmap+0x47c/0xab0 LR [c02885cc] check_unmap+0x47c/0xab0 Call Trace: [effd3e00] [c02885cc] check_unmap+0x47c/0xab0 (unreliable) [effd3e50] [c0288c78] debug_dma_unmap_page+0x78/0x90 [effd3ed0] [f9350974] ahash_done_ctx_dst+0xa4/0x200 [caamhash] [effd3f00] [c0429640] caam_jr_dequeue+0x1c0/0x280 [effd3f50] [c002c94c] tasklet_action+0xcc/0x1a0 [effd3f80] [c002cb30] __do_softirq+0x110/0x220 [effd3fe0] [c002cf34] irq_exit+0xa4/0xe0 [effd3ff0] [c000d834] call_do_irq+0x24/0x3c [c07d7d50] [c000489c] do_IRQ+0x8c/0x110 [c07d7d70] [c000f86c] ret_from_except+0x0/0x18 --- Exception: 501 at _raw_spin_unlock_irq+0x30/0x50 LR = _raw_spin_unlock_irq+0x2c/0x50 [c07d7e40] [c0053084] finish_task_switch+0x74/0x130 [c07d7e60] [c058f278] __schedule+0x238/0x620 [c07d7f70] [c058fb50] schedule_preempt_disabled+0x10/0x20 [c07d7f80] [c00686a0] cpu_startup_entry+0x100/0x1b0 [c07d7fb0] [c074793c] start_kernel+0x338/0x34c [c07d7ff0] [c00003d8] set_ivor+0x140/0x17c Instruction dump: 7d495214 7d294214 806a0010 80c90010 811a001c 813a0020 815a0024 90610008 3c60c06d 90c1000c 3863f764 4830d131 <0fe00000> 3c60c06d 3863f0f4 4830d121 ---[ end trace db1fae088c75c270 ]--- Mapped at: [<f9352454>] ahash_update_first+0x5b4/0xba0 [caamhash] [<c022ff28>] __test_hash+0x288/0x6c0 [<c0230388>] test_hash+0x28/0xb0 [<c02304a4>] alg_test_hash+0x94/0xc0 [<c022fa94>] alg_test+0x114/0x2e0 Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

caam_jr ffe301000.jr: DMA-API: device driver frees DMA memory with different direction [device address=0x0000000006271dac] [size=28 bytes] [mapped with DMA_TO_DEVICE] [unmapped with DMA_FROM_DEVICE] ------------[ cut here ]------------ WARNING: at lib/dma-debug.c:1131 Modules linked in: caamhash(+) [last unloaded: caamhash] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.16.0-rc1 #23 task: c0789380 ti: effd2000 task.ti: c07d6000 NIP: c02885cc LR: c02885cc CTR: c02d7020 REGS: effd3d50 TRAP: 0700 Tainted: G W (3.16.0-rc1) MSR: 00021002 <CE,ME> CR: 44048082 XER: 00000000 GPR00: c02885cc effd3e00 c0789380 000000c6 c1de3478 c1de382c 00000000 00021002 GPR08: 00000007 00000000 01660000 0000012f 84048082 00000000 00000018 c07db080 GPR16: 00000006 00000100 0000002c c62517a0 c07e1e10 c0da1180 00029002 c0d95f88 GPR24: c07a0000 c07a4acc effd3e58 ee322bc0 0000001c ee130210 00000000 c0d95f80 NIP [c02885cc] check_unmap+0x47c/0xab0 LR [c02885cc] check_unmap+0x47c/0xab0 Call Trace: [effd3e00] [c02885cc] check_unmap+0x47c/0xab0 (unreliable) [effd3e50] [c0288c78] debug_dma_unmap_page+0x78/0x90 [effd3ed0] [f9624d84] ahash_done_ctx_src+0xa4/0x200 [caamhash] [effd3f00] [c0429640] caam_jr_dequeue+0x1c0/0x280 [effd3f50] [c002c94c] tasklet_action+0xcc/0x1a0 [effd3f80] [c002cb30] __do_softirq+0x110/0x220 [effd3fe0] [c002cf34] irq_exit+0xa4/0xe0 [effd3ff0] [c000d834] call_do_irq+0x24/0x3c [c07d7d50] [c000489c] do_IRQ+0x8c/0x110 [c07d7d70] [c000f86c] ret_from_except+0x0/0x18 --- Exception: 501 at _raw_spin_unlock_irq+0x30/0x50 LR = _raw_spin_unlock_irq+0x2c/0x50 [c07d7e40] [c0053084] finish_task_switch+0x74/0x130 [c07d7e60] [c058f278] __schedule+0x238/0x620 [c07d7f70] [c058fb50] schedule_preempt_disabled+0x10/0x20 [c07d7f80] [c00686a0] cpu_startup_entry+0x100/0x1b0 [c07d7fb0] [c074793c] start_kernel+0x338/0x34c [c07d7ff0] [c00003d8] set_ivor+0x140/0x17c Instruction dump: 7d495214 7d294214 806a0010 80c90010 811a001c 813a0020 815a0024 90610008 3c60c06d 90c1000c 3863f764 4830d131 <0fe00000> 3c60c06d 3863f0f4 4830d121 ---[ end trace db1fae088c75c280 ]--- Mapped at: [<f96251bc>] ahash_final_ctx+0x14c/0x7b0 [caamhash] [<c022ff4c>] __test_hash+0x2ac/0x6c0 [<c0230388>] test_hash+0x28/0xb0 [<c02304a4>] alg_test_hash+0x94/0xc0 [<c022fa94>] alg_test+0x114/0x2e0 Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Not initializing edesc->sec4_sg_bytes correctly causes ahash_done callback to free unallocated DMA memory: caam_jr ffe301000.jr: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x300900000000b44d] [size=46158 bytes] WARNING: at lib/dma-debug.c:1080 Modules linked in: caamhash(+) [last unloaded: caamhash] CPU: 0 PID: 1358 Comm: cryptomgr_test Tainted: G W 3.16.0-rc1 #23 task: eed04250 ti: effd2000 task.ti: c6046000 NIP: c02889fc LR: c02889fc CTR: c02d7020 REGS: effd3d50 TRAP: 0700 Tainted: G W (3.16.0-rc1) MSR: 00029002 <CE,EE,ME> CR: 44048082 XER: 00000000 GPR00: c02889fc effd3e00 eed04250 00000091 c1de3478 c1de382c 00000000 00029002 GPR08: 00000007 00000000 01660000 00000000 22048082 00000000 00000018 c07db080 GPR16: 00000006 00000100 0000002c ee2497e0 c07e1e10 c0da1180 00029002 c0d912c8 GPR24: 00000014 ee2497c0 effd3e58 00000000 c078ad4c ee130210 30090000 0000b44d NIP [c02889fc] check_unmap+0x8ac/0xab0 LR [c02889fc] check_unmap+0x8ac/0xab0 Call Trace: [effd3e00] [c02889fc] check_unmap+0x8ac/0xab0 (unreliable) [effd3e50] [c0288c78] debug_dma_unmap_page+0x78/0x90 [effd3ed0] [f9404fec] ahash_done+0x11c/0x190 [caamhash] [effd3f00] [c0429640] caam_jr_dequeue+0x1c0/0x280 [effd3f50] [c002c94c] tasklet_action+0xcc/0x1a0 [effd3f80] [c002cb30] __do_softirq+0x110/0x220 [effd3fe0] [c002cf34] irq_exit+0xa4/0xe0 [effd3ff0] [c000d834] call_do_irq+0x24/0x3c [c6047ae0] [c000489c] do_IRQ+0x8c/0x110 [c6047b00] [c000f86c] ret_from_except+0x0/0x18 --- Exception: 501 at _raw_spin_unlock_irq+0x30/0x50 LR = _raw_spin_unlock_irq+0x2c/0x50 [c6047bd0] [c0590158] wait_for_common+0xb8/0x170 [c6047c10] [c059024c] wait_for_completion_interruptible+0x1c/0x40 [c6047c20] [c022fc78] do_one_async_hash_op.isra.2.part.3+0x18/0x40 [c6047c30] [c022ff98] __test_hash+0x2f8/0x6c0 [c6047de0] [c0230388] test_hash+0x28/0xb0 [c6047e00] [c0230458] alg_test_hash+0x48/0xc0 [c6047e20] [c022fa94] alg_test+0x114/0x2e0 [c6047ea0] [c022cd1c] cryptomgr_test+0x4c/0x60 [c6047eb0] [c00497a4] kthread+0xc4/0xe0 [c6047f40] [c000f2fc] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 41de01c8 80a9002c 2f850000 40fe0008 80a90008 80fa0018 3c60c06d 811a001c 3863f4a4 813a0020 815a0024 4830cd01 <0fe00000> 81340048 2f890000 40feff48 Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

dst_dma not being properly initialized causes ahash_done_ctx_dst to try to free unallocated DMA memory: caam_jr ffe301000.jr: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x0000000006513340] [size=28 bytes] WARNING: at lib/dma-debug.c:1080 Modules linked in: caamhash(+) [last unloaded: caamhash] CPU: 0 PID: 1373 Comm: cryptomgr_test Tainted: G W 3.16.0-rc1 #23 task: ee23e350 ti: effd2000 task.ti: ee1f6000 NIP: c02889fc LR: c02889fc CTR: c02d7020 REGS: effd3d50 TRAP: 0700 Tainted: G W (3.16.0-rc1) MSR: 00029002 <CE,EE,ME> CR: 44048082 XER: 00000000 GPR00: c02889fc effd3e00 ee23e350 0000008e c1de3478 c1de382c 00000000 00029002 GPR08: 00000007 00000000 01660000 00000000 24048082 00000000 00000018 c07db080 GPR16: 00000006 00000100 0000002c eeb4a7e0 c07e1e10 c0da1180 00029002 c0d9b3c8 GPR24: eeb4a7c0 00000000 effd3e58 00000000 c078ad4c ee130210 00000000 06513340 NIP [c02889fc] check_unmap+0x8ac/0xab0 LR [c02889fc] check_unmap+0x8ac/0xab0 Call Trace: [effd3e00] [c02889fc] check_unmap+0x8ac/0xab0 (unreliable) [effd3e50] [c0288c78] debug_dma_unmap_page+0x78/0x90 [effd3ed0] [f94b89ec] ahash_done_ctx_dst+0x11c/0x200 [caamhash] [effd3f00] [c0429640] caam_jr_dequeue+0x1c0/0x280 [effd3f50] [c002c94c] tasklet_action+0xcc/0x1a0 [effd3f80] [c002cb30] __do_softirq+0x110/0x220 [effd3fe0] [c002cf34] irq_exit+0xa4/0xe0 [effd3ff0] [c000d834] call_do_irq+0x24/0x3c [ee1f7ae0] [c000489c] do_IRQ+0x8c/0x110 [ee1f7b00] [c000f86c] ret_from_except+0x0/0x18 --- Exception: 501 at _raw_spin_unlock_irq+0x30/0x50 LR = _raw_spin_unlock_irq+0x2c/0x50 [ee1f7bd0] [c0590158] wait_for_common+0xb8/0x170 [ee1f7c10] [c059024c] wait_for_completion_interruptible+0x1c/0x40 [ee1f7c20] [c022fc78] do_one_async_hash_op.isra.2.part.3+0x18/0x40 [ee1f7c30] [c022ffb8] __test_hash+0x318/0x6c0 [ee1f7de0] [c0230388] test_hash+0x28/0xb0 [ee1f7e00] [c02304a4] alg_test_hash+0x94/0xc0 [ee1f7e20] [c022fa94] alg_test+0x114/0x2e0 [ee1f7ea0] [c022cd1c] cryptomgr_test+0x4c/0x60 [ee1f7eb0] [c00497a4] kthread+0xc4/0xe0 [ee1f7f40] [c000f2fc] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 41de01c8 80a9002c 2f850000 40fe0008 80a90008 80fa0018 3c60c06d 811a001c 3863f4a4 813a0020 815a0024 4830cd01 <0fe00000> 81340048 2f890000 40feff48 Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

state->buf_dma not being initialized can cause try_buf_map_to_sec4_sg to try to free unallocated DMA memory: caam_jr ffe301000.jr: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x000000002eb15068] [size=0 bytes] WARNING: at lib/dma-debug.c:1080 Modules linked in: caamhash(+) [last unloaded: caamhash] CPU: 0 PID: 1387 Comm: cryptomgr_test Tainted: G W 3.16.0-rc1 #23 task: eed24e90 ti: eebd0000 task.ti: eebd0000 NIP: c02889fc LR: c02889fc CTR: c02d7020 REGS: eebd1a50 TRAP: 0700 Tainted: G W (3.16.0-rc1) MSR: 00029002 <CE,EE,ME> CR: 44042082 XER: 00000000 GPR00: c02889fc eebd1b00 eed24e90 0000008d c1de3478 c1de382c 00000000 00029002 GPR08: 00000007 00000000 01660000 00000000 24042082 00000000 c07a1900 eeda2a40 GPR16: 005d62a0 c078ad4c 00000000 eeb15068 c07e1e10 c0da1180 00029002 c0d97408 GPR24: c62497a0 00000014 eebd1b5 00000000 c078ad4c ee130210 00000000 2eb15068 NIP [c02889fc] check_unmap+0x8ac/0xab0 LR [c02889fc] check_unmap+0x8ac/0xab0 Call Trace: [eebd1b00] [c02889fc] check_unmap+0x8ac/0xab0 (unreliable) --- Exception: 0 at (null) LR = (null) [eebd1b50] [c0288c78] debug_dma_unmap_page+0x78/0x90 (unreliable) [eebd1bd0] [f956f738] ahash_final_ctx+0x6d8/0x7b0 [caamhash] [eebd1c30] [c022ff4c] __test_hash+0x2ac/0x6c0 [eebd1de0] [c0230388] test_hash+0x28/0xb0 [eebd1e00] [c02304a4] alg_test_hash+0x94/0xc0 [eebd1e20] [c022fa94] alg_test+0x114/0x2e0 [eebd1ea0] [c022cd1c] cryptomgr_test+0x4c/0x60 [eebd1eb0] [c00497a4] kthread+0xc4/0xe0 [eebd1f40] [c000f2fc] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 41de01c8 80a9002c 2f850000 40fe0008 80a90008 80fa0018 3c60c06d 811a001c 3863f4a4 813a0020 815a0024 4830cd01 <0fe00000> 81340048 2f890000 40feff48 Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

commit cde7fc8 upstream. The commit 2111667 ("ARM: pxa: call debug_ll_io_init for earlyprintk") triggers in the current kernel the attached backtrace on PXA/tosa early in the boot time when DEBUG_LL is enabled. It is due to overlap between uart virtual memory defined in DEBUG_UART_VIRT and mapped by debug_ll_io_init() and peripheral bus mapped by pxa_map_io at the same address, 0xf2100000. As hinted by Arnd, map early virtual memory for low level debug on address 0xf6200000, even if that means 2 virtual mappings will give access to the pxa internal UARTs (FFUART, BTUART, STUART, ...). ------------[ cut here ]------------ kernel BUG at /home/lumag/linux/mm/vmalloc.c:1143! Internal error: Oops - BUG: 0 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.17.0-00032-g8e0d202-dirty #23 task: c062a5a8 ti: c0620000 task.ti: c0620000 PC is at vm_area_add_early+0x54/0x84 LR is at add_static_vm_early+0xc/0x60 pc : [<c03e1100>] lr : [<c03d9ef4>] psr: 800001d3 sp : c0621f04 ip : c03efa74 fp : c03edf84 r10: c0637e98 r9 : 40000001 r8 : c03da57c r7 : c3ffcfb0 r6 : 00000000 r5 : c3ffcfb0 r4 : 02000000 r3 : c3ffcfd8 r2 : f2100000 r1 : f4000000 r0 : c3ffcfb0 Flags: Nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 00007977 Table: a0004000 DAC: 00000017 Process swapper (pid: 0, stack limit = 0xc06201c8) Stack: (0xc0621f04 to 0xc0622000) 1f00: c3ffcfd8 40000001 c3ffcfd8 c03ee08c c03da570 c03db90c c0637d24 1f20: 00000000 c03ec7cc c066e654 a0700000 000a0700 c03db914 c03db90c c03daf84 1f40: 00000000 000a0000 c0000000 c03ec7cc 000a0700 c0700000 ffff1000 000a3fff 1f60: 00001000 00000007 00000000 c03ec7cc c0008000 c03ed748 c0621fd4 c03d5d18 1f80: 69052d00 a03ec48c 00000000 c03d8ad0 0000006c 00007977 c036c6e8 00000001 1fa0: c0621fd4 c03ed744 c0628000 a0004000 69052d00 a03ec48c 00000000 c03d68d4 1fc0: 00000000 00000000 00000000 00000000 00000000 c03ed748 c0649894 c062801c 1fe0: c03ed744 c062b2f0 a0004000 69052d00 a03ec48c a0008040 00000000 00000000 [<c03e1100>] (vm_area_add_early) from [<c03d9ef4>] (add_static_vm_early+0xc/0x60) [<c03d9ef4>] (add_static_vm_early) from [<c03da570>] (iotable_init.part.6+0xa8/0xb4) [<c03da570>] (iotable_init.part.6) from [<c03db914>] (pxa25x_map_io+0x8/0x24) [<c03db914>] (pxa25x_map_io) from [<c03daf84>] (paging_init+0x744/0x8d8) [<c03daf84>] (paging_init) from [<c03d8ad0>] (setup_arch+0x354/0x608) [<c03d8ad0>] (setup_arch) from [<c03d68d4>] (start_kernel+0xa8/0x3dc) [<c03d68d4>] (start_kernel) from [<a0008040>] (0xa0008040) Code: e5904008 e0811004 e1520001 2a000005 (e7f001f2) ---[ end trace f24b6c88ae00fa9a ]--- Kernel panic - not syncing: Attempted to kill the idle task! ---[ end Kernel panic - not syncing: Attempted to kill the idle task! Reported-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ecf5fc6 upstream. Nikolay has reported a hang when a memcg reclaim got stuck with the following backtrace: PID: 18308 TASK: ffff883d7c9b0a30 CPU: 1 COMMAND: "rsync" #0 __schedule at ffffffff815ab152 raspberrypi#1 schedule at ffffffff815ab76e raspberrypi#2 schedule_timeout at ffffffff815ae5e5 raspberrypi#3 io_schedule_timeout at ffffffff815aad6a raspberrypi#4 bit_wait_io at ffffffff815abfc6 raspberrypi#5 __wait_on_bit at ffffffff815abda5 raspberrypi#6 wait_on_page_bit at ffffffff8111fd4f raspberrypi#7 shrink_page_list at ffffffff81135445 raspberrypi#8 shrink_inactive_list at ffffffff81135845 raspberrypi#9 shrink_lruvec at ffffffff81135ead raspberrypi#10 shrink_zone at ffffffff811360c3 raspberrypi#11 shrink_zones at ffffffff81136eff raspberrypi#12 do_try_to_free_pages at ffffffff8113712f raspberrypi#13 try_to_free_mem_cgroup_pages at ffffffff811372be raspberrypi#14 try_charge at ffffffff81189423 raspberrypi#15 mem_cgroup_try_charge at ffffffff8118c6f5 raspberrypi#16 __add_to_page_cache_locked at ffffffff8112137d raspberrypi#17 add_to_page_cache_lru at ffffffff81121618 raspberrypi#18 pagecache_get_page at ffffffff8112170b raspberrypi#19 grow_dev_page at ffffffff811c8297 raspberrypi#20 __getblk_slow at ffffffff811c91d6 raspberrypi#21 __getblk_gfp at ffffffff811c92c1 raspberrypi#22 ext4_ext_grow_indepth at ffffffff8124565c raspberrypi#23 ext4_ext_create_new_leaf at ffffffff81246ca8 raspberrypi#24 ext4_ext_insert_extent at ffffffff81246f09 raspberrypi#25 ext4_ext_map_blocks at ffffffff8124a848 raspberrypi#26 ext4_map_blocks at ffffffff8121a5b7 raspberrypi#27 mpage_map_one_extent at ffffffff8121b1fa raspberrypi#28 mpage_map_and_submit_extent at ffffffff8121f07b raspberrypi#29 ext4_writepages at ffffffff8121f6d5 raspberrypi#30 do_writepages at ffffffff8112c490 raspberrypi#31 __filemap_fdatawrite_range at ffffffff81120199 raspberrypi#32 filemap_flush at ffffffff8112041c raspberrypi#33 ext4_alloc_da_blocks at ffffffff81219da1 raspberrypi#34 ext4_rename at ffffffff81229b91 raspberrypi#35 ext4_rename2 at ffffffff81229e32 raspberrypi#36 vfs_rename at ffffffff811a08a5 raspberrypi#37 SYSC_renameat2 at ffffffff811a3ffc raspberrypi#38 sys_renameat2 at ffffffff811a408e raspberrypi#39 sys_rename at ffffffff8119e51e raspberrypi#40 system_call_fastpath at ffffffff815afa89 Dave Chinner has properly pointed out that this is a deadlock in the reclaim code because ext4 doesn't submit pages which are marked by PG_writeback right away. The heuristic was introduced by commit e62e384 ("memcg: prevent OOM with too many dirty pages") and it was applied only when may_enter_fs was specified. The code has been changed by c3b94f4 ("memcg: further prevent OOM with too many dirty pages") which has removed the __GFP_FS restriction with a reasoning that we do not get into the fs code. But this is not sufficient apparently because the fs doesn't necessarily submit pages marked PG_writeback for IO right away. ext4_bio_write_page calls io_submit_add_bh but that doesn't necessarily submit the bio. Instead it tries to map more pages into the bio and mpage_map_one_extent might trigger memcg charge which might end up waiting on a page which is marked PG_writeback but hasn't been submitted yet so we would end up waiting for something that never finishes. Fix this issue by replacing __GFP_IO by may_enter_fs check (for case 2) before we go to wait on the writeback. The page fault path, which is the only path that triggers memcg oom killer since 3.12, shouldn't require GFP_NOFS and so we shouldn't reintroduce the premature OOM killer issue which was originally addressed by the heuristic. As per David Chinner the xfs is doing similar thing since 2.6.15 already so ext4 is not the only affected filesystem. Moreover he notes: : For example: IO completion might require unwritten extent conversion : which executes filesystem transactions and GFP_NOFS allocations. The : writeback flag on the pages can not be cleared until unwritten : extent conversion completes. Hence memory reclaim cannot wait on : page writeback to complete in GFP_NOFS context because it is not : safe to do so, memcg reclaim or otherwise. Cc: stable@vger.kernel.org # 3.9+ [tytso@mit.edu: corrected the control flow] Fixes: c3b94f4 ("memcg: further prevent OOM with too many dirty pages") Reported-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4224cfd ] When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar <suresh2514@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

We enabled UBSAN in the ubuntu kernel, and the cs35l41 driver triggers a warning calltrace like below: cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: bitoffset= 8, word_offset=23, bit_sum mod 32=0, otp_map[i].size = 24 cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: bitoffset= 0, word_offset=24, bit_sum mod 32=24, otp_map[i].size = 0 ================================================================================ UBSAN: shift-out-of-bounds in linux-kernel-src/sound/soc/codecs/cs35l41-lib.c:836:8 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 10 PID: 595 Comm: systemd-udevd Not tainted 5.15.0-23-generic #23 Hardware name: LENOVO \x02MFG_IN_GO/\x02MFG_IN_GO, BIOS N3GET19W (1.00 ) 03/11/2022 Call Trace: <TASK> show_stack+0x52/0x58 dump_stack_lvl+0x4a/0x5f dump_stack+0x10/0x12 ubsan_epilogue+0x9/0x45 __ubsan_handle_shift_out_of_bounds.cold+0x61/0xef ? regmap_unlock_mutex+0xe/0x10 cs35l41_otp_unpack.cold+0x1c6/0x2b2 [snd_soc_cs35l41_lib] cs35l41_hda_probe+0x24f/0x33a [snd_hda_scodec_cs35l41] cs35l41_hda_i2c_probe+0x65/0x90 [snd_hda_scodec_cs35l41_i2c] When both bitoffset and otp_map[i].size are 0, the line 836 will result in GENMASK(-1, 0), this triggers the shift-out-of-bounds calltrace. Here add a checking, if both bitoffset and otp_map[i].size are 0, do not run GENMASK() and directly set otp_val to 0, this will not bring any function change on the driver but could avoid the calltrace. Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20220324081839.62009-2-hui.wang@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>

[ Upstream commit 0b3d5d2 ] We enabled UBSAN in the ubuntu kernel, and the cs35l41 driver triggers a warning calltrace like below: cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: bitoffset= 8, word_offset=23, bit_sum mod 32=0, otp_map[i].size = 24 cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: bitoffset= 0, word_offset=24, bit_sum mod 32=24, otp_map[i].size = 0 ================================================================================ UBSAN: shift-out-of-bounds in linux-kernel-src/sound/soc/codecs/cs35l41-lib.c:836:8 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 10 PID: 595 Comm: systemd-udevd Not tainted 5.15.0-23-generic raspberrypi#23 Hardware name: LENOVO \x02MFG_IN_GO/\x02MFG_IN_GO, BIOS N3GET19W (1.00 ) 03/11/2022 Call Trace: <TASK> show_stack+0x52/0x58 dump_stack_lvl+0x4a/0x5f dump_stack+0x10/0x12 ubsan_epilogue+0x9/0x45 __ubsan_handle_shift_out_of_bounds.cold+0x61/0xef ? regmap_unlock_mutex+0xe/0x10 cs35l41_otp_unpack.cold+0x1c6/0x2b2 [snd_soc_cs35l41_lib] cs35l41_hda_probe+0x24f/0x33a [snd_hda_scodec_cs35l41] cs35l41_hda_i2c_probe+0x65/0x90 [snd_hda_scodec_cs35l41_i2c] When both bitoffset and otp_map[i].size are 0, the line 836 will result in GENMASK(-1, 0), this triggers the shift-out-of-bounds calltrace. Here add a checking, if both bitoffset and otp_map[i].size are 0, do not run GENMASK() and directly set otp_val to 0, this will not bring any function change on the driver but could avoid the calltrace. Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20220324081839.62009-2-hui.wang@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9f34290 ] The CS35L41_NUM_OTP_ELEM is 100, but only 99 entries are defined in the array otp_map_1/2[CS35L41_NUM_OTP_ELEM], this will trigger UBSAN to report a shift-out-of-bounds warning in the cs35l41_otp_unpack() since the last entry in the array will result in GENMASK(-1, 0). UBSAN reports this problem: UBSAN: shift-out-of-bounds in /home/hwang4/build/jammy/jammy/sound/soc/codecs/cs35l41-lib.c:836:8 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 10 PID: 595 Comm: systemd-udevd Not tainted 5.15.0-23-generic #23 Hardware name: LENOVO \x02MFG_IN_GO/\x02MFG_IN_GO, BIOS N3GET19W (1.00 ) 03/11/2022 Call Trace: <TASK> show_stack+0x52/0x58 dump_stack_lvl+0x4a/0x5f dump_stack+0x10/0x12 ubsan_epilogue+0x9/0x45 __ubsan_handle_shift_out_of_bounds.cold+0x61/0xef ? regmap_unlock_mutex+0xe/0x10 cs35l41_otp_unpack.cold+0x1c6/0x2b2 [snd_soc_cs35l41_lib] cs35l41_hda_probe+0x24f/0x33a [snd_hda_scodec_cs35l41] cs35l41_hda_i2c_probe+0x65/0x90 [snd_hda_scodec_cs35l41_i2c] ? cs35l41_hda_i2c_remove+0x20/0x20 [snd_hda_scodec_cs35l41_i2c] i2c_device_probe+0x252/0x2b0 Fixes: 6450ef5 ("ASoC: cs35l41: CS35L41 Boosted Smart Amplifier") Reviewed-by: Lucas Tanure <tanureal@opensource.cirrus.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20220328123535.50000-2-hui.wang@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9f34290 ] The CS35L41_NUM_OTP_ELEM is 100, but only 99 entries are defined in the array otp_map_1/2[CS35L41_NUM_OTP_ELEM], this will trigger UBSAN to report a shift-out-of-bounds warning in the cs35l41_otp_unpack() since the last entry in the array will result in GENMASK(-1, 0). UBSAN reports this problem: UBSAN: shift-out-of-bounds in /home/hwang4/build/jammy/jammy/sound/soc/codecs/cs35l41-lib.c:836:8 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 10 PID: 595 Comm: systemd-udevd Not tainted 5.15.0-23-generic raspberrypi#23 Hardware name: LENOVO \x02MFG_IN_GO/\x02MFG_IN_GO, BIOS N3GET19W (1.00 ) 03/11/2022 Call Trace: <TASK> show_stack+0x52/0x58 dump_stack_lvl+0x4a/0x5f dump_stack+0x10/0x12 ubsan_epilogue+0x9/0x45 __ubsan_handle_shift_out_of_bounds.cold+0x61/0xef ? regmap_unlock_mutex+0xe/0x10 cs35l41_otp_unpack.cold+0x1c6/0x2b2 [snd_soc_cs35l41_lib] cs35l41_hda_probe+0x24f/0x33a [snd_hda_scodec_cs35l41] cs35l41_hda_i2c_probe+0x65/0x90 [snd_hda_scodec_cs35l41_i2c] ? cs35l41_hda_i2c_remove+0x20/0x20 [snd_hda_scodec_cs35l41_i2c] i2c_device_probe+0x252/0x2b0 Fixes: 6450ef5 ("ASoC: cs35l41: CS35L41 Boosted Smart Amplifier") Reviewed-by: Lucas Tanure <tanureal@opensource.cirrus.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20220328123535.50000-2-hui.wang@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

After modifying the QP to the Error state, all RX WR would be completed with WC in IB_WC_WR_FLUSH_ERR status. Current implementation does not wait for it is done, but destroy the QP and free the link group directly. So there is a risk that accessing the freed memory in tasklet context. Here is a crash example: BUG: unable to handle page fault for address: ffffffff8f220860 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD f7300e067 P4D f7300e067 PUD f7300f063 PMD 8c4e45063 PTE 800ffff08c9df060 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G S OE 5.10.0-0607+ #23 Hardware name: Inspur NF5280M4/YZMB-00689-101, BIOS 4.1.20 07/09/2018 RIP: 0010:native_queued_spin_lock_slowpath+0x176/0x1b0 Code: f3 90 48 8b 32 48 85 f6 74 f6 eb d5 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 00 c8 02 00 48 03 04 f5 00 09 98 8e <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32 RSP: 0018:ffffb3b6c001ebd8 EFLAGS: 00010086 RAX: ffffffff8f220860 RBX: 0000000000000246 RCX: 0000000000080000 RDX: ffff91db1f86c800 RSI: 000000000000173c RDI: ffff91db62bace00 RBP: ffff91db62bacc00 R08: 0000000000000000 R09: c00000010000028b R10: 0000000000055198 R11: ffffb3b6c001ea58 R12: ffff91db80e05010 R13: 000000000000000a R14: 0000000000000006 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff91db1f840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff8f220860 CR3: 00000001f9580004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> _raw_spin_lock_irqsave+0x30/0x40 mlx5_ib_poll_cq+0x4c/0xc50 [mlx5_ib] smc_wr_rx_tasklet_fn+0x56/0xa0 [smc] tasklet_action_common.isra.21+0x66/0x100 __do_softirq+0xd5/0x29c asm_call_irq_on_stack+0x12/0x20 </IRQ> do_softirq_own_stack+0x37/0x40 irq_exit_rcu+0x9d/0xa0 sysvec_call_function_single+0x34/0x80 asm_sysvec_call_function_single+0x12/0x20 Fixes: bd4ad57 ("smc: initialize IB transport incl. PD, MR, QP, CQ, event, WR") Signed-off-by: Yacan Liu <liuyacan@corp.netease.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>

[ Upstream commit e9b1a4f ] After modifying the QP to the Error state, all RX WR would be completed with WC in IB_WC_WR_FLUSH_ERR status. Current implementation does not wait for it is done, but destroy the QP and free the link group directly. So there is a risk that accessing the freed memory in tasklet context. Here is a crash example: BUG: unable to handle page fault for address: ffffffff8f220860 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD f7300e067 P4D f7300e067 PUD f7300f063 PMD 8c4e45063 PTE 800ffff08c9df060 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G S OE 5.10.0-0607+ #23 Hardware name: Inspur NF5280M4/YZMB-00689-101, BIOS 4.1.20 07/09/2018 RIP: 0010:native_queued_spin_lock_slowpath+0x176/0x1b0 Code: f3 90 48 8b 32 48 85 f6 74 f6 eb d5 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 00 c8 02 00 48 03 04 f5 00 09 98 8e <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32 RSP: 0018:ffffb3b6c001ebd8 EFLAGS: 00010086 RAX: ffffffff8f220860 RBX: 0000000000000246 RCX: 0000000000080000 RDX: ffff91db1f86c800 RSI: 000000000000173c RDI: ffff91db62bace00 RBP: ffff91db62bacc00 R08: 0000000000000000 R09: c00000010000028b R10: 0000000000055198 R11: ffffb3b6c001ea58 R12: ffff91db80e05010 R13: 000000000000000a R14: 0000000000000006 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff91db1f840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff8f220860 CR3: 00000001f9580004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> _raw_spin_lock_irqsave+0x30/0x40 mlx5_ib_poll_cq+0x4c/0xc50 [mlx5_ib] smc_wr_rx_tasklet_fn+0x56/0xa0 [smc] tasklet_action_common.isra.21+0x66/0x100 __do_softirq+0xd5/0x29c asm_call_irq_on_stack+0x12/0x20 </IRQ> do_softirq_own_stack+0x37/0x40 irq_exit_rcu+0x9d/0xa0 sysvec_call_function_single+0x34/0x80 asm_sysvec_call_function_single+0x12/0x20 Fixes: bd4ad57 ("smc: initialize IB transport incl. PD, MR, QP, CQ, event, WR") Signed-off-by: Yacan Liu <liuyacan@corp.netease.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

Fix port I/O string accessors such as `insb', `outsb', etc. which use the physical PCI port I/O address rather than the corresponding memory mapping to get at the requested location, which in turn breaks at least accesses made by our parport driver to a PCIe parallel port such as: PCI parallel port detected: 1415:c118, I/O at 0x1000(0x1008), IRQ 20 parport0: PC-style at 0x1000 (0x1008), irq 20, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] causing a memory access fault: Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000001008 Oops [raspberrypi#1] Modules linked in: CPU: 1 PID: 350 Comm: cat Not tainted 6.0.0-rc2-00283-g10d4879f9ef0-dirty raspberrypi#23 Hardware name: SiFive HiFive Unmatched A00 (DT) epc : parport_pc_fifo_write_block_pio+0x266/0x416 ra : parport_pc_fifo_write_block_pio+0xb4/0x416 epc : ffffffff80542c3e ra : ffffffff80542a8c sp : ffffffd88899fc60 gp : ffffffff80fa2700 tp : ffffffd882b1e900 t0 : ffffffd883d0b000 t1 : ffffffffff000002 t2 : 4646393043330a38 s0 : ffffffd88899fcf0 s1 : 0000000000001000 a0 : 0000000000000010 a1 : 0000000000000000 a2 : ffffffd883d0a010 a3 : 0000000000000023 a4 : 00000000ffff8fbb a5 : ffffffd883d0a001 a6 : 0000000100000000 a7 : ffffffc800000000 s2 : ffffffffff000002 s3 : ffffffff80d28880 s4 : ffffffff80fa1f50 s5 : 0000000000001008 s6 : 0000000000000008 s7 : ffffffd883d0a000 s8 : 0004000000000000 s9 : ffffffff80dc1d80 s10: ffffffd8807e4000 s11: 0000000000000000 t3 : 00000000000000ff t4 : 393044410a303930 t5 : 0000000000001000 t6 : 0000000000040000 status: 0000000200000120 badaddr: 0000000000001008 cause: 000000000000000f [<ffffffff80543212>] parport_pc_compat_write_block_pio+0xfe/0x200 [<ffffffff8053bbc0>] parport_write+0x46/0xf8 [<ffffffff8050530e>] lp_write+0x158/0x2d2 [<ffffffff80185716>] vfs_write+0x8e/0x2c2 [<ffffffff80185a74>] ksys_write+0x52/0xc2 [<ffffffff80185af2>] sys_write+0xe/0x16 [<ffffffff80003770>] ret_from_syscall+0x0/0x2 ---[ end trace 0000000000000000 ]--- For simplicity address the problem by adding PCI_IOBASE to the physical address requested in the respective wrapper macros only, observing that the raw accessors such as `__insb', `__outsb', etc. are not supposed to be used other than by said macros. Remove the cast to `long' that is no longer needed on `addr' now that it is used as an offset from PCI_IOBASE and add parentheses around `addr' needed for predictable evaluation in macro expansion. No need to make said adjustments in separate changes given that current code is gravely broken and does not ever work. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: fab957c ("RISC-V: Atomic and Locking Code") Cc: stable@vger.kernel.org # v4.15+ Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209220223080.29493@angie.orcam.me.uk Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

commit 9cc205e upstream. Fix port I/O string accessors such as `insb', `outsb', etc. which use the physical PCI port I/O address rather than the corresponding memory mapping to get at the requested location, which in turn breaks at least accesses made by our parport driver to a PCIe parallel port such as: PCI parallel port detected: 1415:c118, I/O at 0x1000(0x1008), IRQ 20 parport0: PC-style at 0x1000 (0x1008), irq 20, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] causing a memory access fault: Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000001008 Oops [#1] Modules linked in: CPU: 1 PID: 350 Comm: cat Not tainted 6.0.0-rc2-00283-g10d4879f9ef0-dirty #23 Hardware name: SiFive HiFive Unmatched A00 (DT) epc : parport_pc_fifo_write_block_pio+0x266/0x416 ra : parport_pc_fifo_write_block_pio+0xb4/0x416 epc : ffffffff80542c3e ra : ffffffff80542a8c sp : ffffffd88899fc60 gp : ffffffff80fa2700 tp : ffffffd882b1e900 t0 : ffffffd883d0b000 t1 : ffffffffff000002 t2 : 4646393043330a38 s0 : ffffffd88899fcf0 s1 : 0000000000001000 a0 : 0000000000000010 a1 : 0000000000000000 a2 : ffffffd883d0a010 a3 : 0000000000000023 a4 : 00000000ffff8fbb a5 : ffffffd883d0a001 a6 : 0000000100000000 a7 : ffffffc800000000 s2 : ffffffffff000002 s3 : ffffffff80d28880 s4 : ffffffff80fa1f50 s5 : 0000000000001008 s6 : 0000000000000008 s7 : ffffffd883d0a000 s8 : 0004000000000000 s9 : ffffffff80dc1d80 s10: ffffffd8807e4000 s11: 0000000000000000 t3 : 00000000000000ff t4 : 393044410a303930 t5 : 0000000000001000 t6 : 0000000000040000 status: 0000000200000120 badaddr: 0000000000001008 cause: 000000000000000f [<ffffffff80543212>] parport_pc_compat_write_block_pio+0xfe/0x200 [<ffffffff8053bbc0>] parport_write+0x46/0xf8 [<ffffffff8050530e>] lp_write+0x158/0x2d2 [<ffffffff80185716>] vfs_write+0x8e/0x2c2 [<ffffffff80185a74>] ksys_write+0x52/0xc2 [<ffffffff80185af2>] sys_write+0xe/0x16 [<ffffffff80003770>] ret_from_syscall+0x0/0x2 ---[ end trace 0000000000000000 ]--- For simplicity address the problem by adding PCI_IOBASE to the physical address requested in the respective wrapper macros only, observing that the raw accessors such as `__insb', `__outsb', etc. are not supposed to be used other than by said macros. Remove the cast to `long' that is no longer needed on `addr' now that it is used as an offset from PCI_IOBASE and add parentheses around `addr' needed for predictable evaluation in macro expansion. No need to make said adjustments in separate changes given that current code is gravely broken and does not ever work. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: fab957c ("RISC-V: Atomic and Locking Code") Cc: stable@vger.kernel.org # v4.15+ Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209220223080.29493@angie.orcam.me.uk Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The UAF bug occurred because we were putting DFS root sessions in cifs_umount() while DFS cache refresher was being executed. Make DFS root sessions have same lifetime as DFS tcons so we can avoid the use-after-free bug is DFS cache refresher and other places that require IPCs to get new DFS referrals on. Also, get rid of mount group handling in DFS cache as we no longer need it. This fixes below use-after-free bug catched by KASAN [ 379.946955] BUG: KASAN: use-after-free in __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.947642] Read of size 8 at addr ffff888018f57030 by task kworker/u4:3/56 [ 379.948096] [ 379.948208] CPU: 0 PID: 56 Comm: kworker/u4:3 Not tainted 6.2.0-rc7-lku #23 [ 379.948661] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552-rebuilt.opensuse.org 04/01/2014 [ 379.949368] Workqueue: cifs-dfscache refresh_cache_worker [cifs] [ 379.949942] Call Trace: [ 379.950113] <TASK> [ 379.950260] dump_stack_lvl+0x50/0x67 [ 379.950510] print_report+0x16a/0x48e [ 379.950759] ? __virt_addr_valid+0xd8/0x160 [ 379.951040] ? __phys_addr+0x41/0x80 [ 379.951285] kasan_report+0xdb/0x110 [ 379.951533] ? __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.952056] ? __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.952585] __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.953096] ? __pfx___refresh_tcon.isra.0+0x10/0x10 [cifs] [ 379.953637] ? __pfx___mutex_lock+0x10/0x10 [ 379.953915] ? lock_release+0xb6/0x720 [ 379.954167] ? __pfx_lock_acquire+0x10/0x10 [ 379.954443] ? refresh_cache_worker+0x34e/0x6d0 [cifs] [ 379.954960] ? __pfx_wb_workfn+0x10/0x10 [ 379.955239] refresh_cache_worker+0x4ad/0x6d0 [cifs] [ 379.955755] ? __pfx_refresh_cache_worker+0x10/0x10 [cifs] [ 379.956323] ? __pfx_lock_acquired+0x10/0x10 [ 379.956615] ? read_word_at_a_time+0xe/0x20 [ 379.956898] ? lockdep_hardirqs_on_prepare+0x12/0x220 [ 379.957235] process_one_work+0x535/0x990 [ 379.957509] ? __pfx_process_one_work+0x10/0x10 [ 379.957812] ? lock_acquired+0xb7/0x5f0 [ 379.958069] ? __list_add_valid+0x37/0xd0 [ 379.958341] ? __list_add_valid+0x37/0xd0 [ 379.958611] worker_thread+0x8e/0x630 [ 379.958861] ? __pfx_worker_thread+0x10/0x10 [ 379.959148] kthread+0x17d/0x1b0 [ 379.959369] ? __pfx_kthread+0x10/0x10 [ 379.959630] ret_from_fork+0x2c/0x50 [ 379.959879] </TASK> Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Cc: stable@vger.kernel.org # 6.2 Signed-off-by: Steve French <stfrench@microsoft.com>

commit 396935d upstream. The UAF bug occurred because we were putting DFS root sessions in cifs_umount() while DFS cache refresher was being executed. Make DFS root sessions have same lifetime as DFS tcons so we can avoid the use-after-free bug is DFS cache refresher and other places that require IPCs to get new DFS referrals on. Also, get rid of mount group handling in DFS cache as we no longer need it. This fixes below use-after-free bug catched by KASAN [ 379.946955] BUG: KASAN: use-after-free in __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.947642] Read of size 8 at addr ffff888018f57030 by task kworker/u4:3/56 [ 379.948096] [ 379.948208] CPU: 0 PID: 56 Comm: kworker/u4:3 Not tainted 6.2.0-rc7-lku #23 [ 379.948661] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552-rebuilt.opensuse.org 04/01/2014 [ 379.949368] Workqueue: cifs-dfscache refresh_cache_worker [cifs] [ 379.949942] Call Trace: [ 379.950113] <TASK> [ 379.950260] dump_stack_lvl+0x50/0x67 [ 379.950510] print_report+0x16a/0x48e [ 379.950759] ? __virt_addr_valid+0xd8/0x160 [ 379.951040] ? __phys_addr+0x41/0x80 [ 379.951285] kasan_report+0xdb/0x110 [ 379.951533] ? __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.952056] ? __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.952585] __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.953096] ? __pfx___refresh_tcon.isra.0+0x10/0x10 [cifs] [ 379.953637] ? __pfx___mutex_lock+0x10/0x10 [ 379.953915] ? lock_release+0xb6/0x720 [ 379.954167] ? __pfx_lock_acquire+0x10/0x10 [ 379.954443] ? refresh_cache_worker+0x34e/0x6d0 [cifs] [ 379.954960] ? __pfx_wb_workfn+0x10/0x10 [ 379.955239] refresh_cache_worker+0x4ad/0x6d0 [cifs] [ 379.955755] ? __pfx_refresh_cache_worker+0x10/0x10 [cifs] [ 379.956323] ? __pfx_lock_acquired+0x10/0x10 [ 379.956615] ? read_word_at_a_time+0xe/0x20 [ 379.956898] ? lockdep_hardirqs_on_prepare+0x12/0x220 [ 379.957235] process_one_work+0x535/0x990 [ 379.957509] ? __pfx_process_one_work+0x10/0x10 [ 379.957812] ? lock_acquired+0xb7/0x5f0 [ 379.958069] ? __list_add_valid+0x37/0xd0 [ 379.958341] ? __list_add_valid+0x37/0xd0 [ 379.958611] worker_thread+0x8e/0x630 [ 379.958861] ? __pfx_worker_thread+0x10/0x10 [ 379.959148] kthread+0x17d/0x1b0 [ 379.959369] ? __pfx_kthread+0x10/0x10 [ 379.959630] ret_from_fork+0x2c/0x50 [ 379.959879] </TASK> Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Cc: stable@vger.kernel.org # 6.2 Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e24c644 ] I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function: Direct leak of 28 byte(s) in 4 object(s) allocated from: #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe) raspberrypi#1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985 raspberrypi#2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140 raspberrypi#3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206 raspberrypi#4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291 raspberrypi#5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299 raspberrypi#6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849 raspberrypi#7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161 raspberrypi#8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207 raspberrypi#9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786 raspberrypi#10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285 raspberrypi#11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369 raspberrypi#12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335 raspberrypi#13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389 raspberrypi#14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431 raspberrypi#15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251 raspberrypi#16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284 raspberrypi#17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593 raspberrypi#18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727 raspberrypi#19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048 raspberrypi#20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127 raspberrypi#21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152 raspberrypi#22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252 raspberrypi#23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347 raspberrypi#24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461 raspberrypi#25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673 raspberrypi#26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2) The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function. Free the token variable before calling read_token in order to plug the leak. Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

The cited commit adds a compeletion to remove dependency on rtnl lock. But it causes a deadlock for multiple encapsulations: crash> bt ffff8aece8a64000 PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc" #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418 #2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898 #3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8 #4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb #5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core] #6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core] #7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core] #8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core] #9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core] #10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core] #11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core] #12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8 #13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower] #14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower] #15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047 #16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31 #17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853 #18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835 #19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27 #20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245 #21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482 #22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a #23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2 #24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2 #25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f #26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8 #27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c crash> bt 0xffff8aeb07544000 PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9" #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418 #2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88 #3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b #4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core] #5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core] #6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core] #7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c #8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012 #9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d #10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f After the first encap is attached, flow will be added to encap entry's flows list. If neigh update is running at this time, the following encaps of the flow can't hold the encap_tbl_lock and sleep. If neigh update thread is waiting for that flow's init_done, deadlock happens. Fix it by holding lock outside of the for loop. If neigh update is running, prevent encap flows from offloading. Since the lock is held outside of the for loop, concurrent creation of encap entries is not allowed. So remove unnecessary wait_for_completion call for res_ready. Fixes: 95435ad ("net/mlx5e: Only access fully initialized flows in neigh update") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

[ Upstream commit 37c3b9f ] The cited commit adds a compeletion to remove dependency on rtnl lock. But it causes a deadlock for multiple encapsulations: crash> bt ffff8aece8a64000 PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc" #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418 #2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898 #3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8 #4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb #5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core] #6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core] #7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core] #8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core] #9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core] #10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core] #11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core] #12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8 #13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower] #14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower] #15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047 #16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31 #17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853 #18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835 #19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27 #20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245 #21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482 #22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a #23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2 #24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2 #25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f #26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8 #27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c crash> bt 0xffff8aeb07544000 PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9" #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418 #2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88 #3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b #4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core] #5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core] #6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core] #7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c #8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012 #9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d #10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f After the first encap is attached, flow will be added to encap entry's flows list. If neigh update is running at this time, the following encaps of the flow can't hold the encap_tbl_lock and sleep. If neigh update thread is waiting for that flow's init_done, deadlock happens. Fix it by holding lock outside of the for loop. If neigh update is running, prevent encap flows from offloading. Since the lock is held outside of the for loop, concurrent creation of encap entries is not allowed. So remove unnecessary wait_for_completion call for res_ready. Fixes: 95435ad ("net/mlx5e: Only access fully initialized flows in neigh update") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit bd6fc5d upstream. Syzbot reported a null-ptr-deref of sqd->thread inside io_sqpoll_wq_cpu_affinity. It turns out the sqd->thread can go away from under us during io_uring_register, in case the process gets a fatal signal during io_uring_register. It is not particularly hard to hit the race, and while I am not sure this is the exact case hit by syzbot, it solves it. Finally, checking ->thread is enough to close the race because we locked sqd while "parking" the thread, thus preventing it from going away. I reproduced it fairly consistently with a program that does: int main(void) { ... io_uring_queue_init(RING_LEN, &ring1, IORING_SETUP_SQPOLL); while (1) { io_uring_register_iowq_aff(ring, 1, &mask); } } Executed in a loop with timeout to trigger SIGTERM: while true; do timeout 1 /a.out ; done This will hit the following BUG() in very few attempts. BUG: kernel NULL pointer dereference, address: 00000000000007a8 PGD 800000010e949067 P4D 800000010e949067 PUD 10e46e067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 15715 Comm: dead-sqpoll Not tainted 6.5.0-rc7-next-20230825-g193296236fa0-dirty #23 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:io_sqpoll_wq_cpu_affinity+0x27/0x70 Code: 90 90 90 0f 1f 44 00 00 55 53 48 8b 9f 98 03 00 00 48 85 db 74 4f 48 89 df 48 89 f5 e8 e2 f8 ff ff 48 8b 43 38 48 85 c0 74 22 <48> 8b b8 a8 07 00 00 48 89 ee e8 ba b1 00 00 48 89 df 89 c5 e8 70 RSP: 0018:ffffb04040ea7e70 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff93c010749e40 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffa7653331 RDI: 00000000ffffffff RBP: ffffb04040ea7eb8 R08: 0000000000000000 R09: c0000000ffffdfff R10: ffff93c01141b600 R11: ffffb04040ea7d18 R12: ffff93c00ea74840 R13: 0000000000000011 R14: 0000000000000000 R15: ffff93c00ea74800 FS: 00007fb7c276ab80(0000) GS:ffff93c36f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000007a8 CR3: 0000000111634003 CR4: 0000000000370ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? page_fault_oops+0x154/0x440 ? do_user_addr_fault+0x174/0x7b0 ? exc_page_fault+0x63/0x140 ? asm_exc_page_fault+0x22/0x30 ? io_sqpoll_wq_cpu_affinity+0x27/0x70 __io_register_iowq_aff+0x2b/0x60 __io_uring_register+0x614/0xa70 __x64_sys_io_uring_register+0xaa/0x1a0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7fb7c226fec9 Code: 2e 00 b8 ca 00 00 00 0f 05 eb a5 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 97 7f 2d 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe2c0674f8 EFLAGS: 00000246 ORIG_RAX: 00000000000001ab RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fb7c226fec9 RDX: 00007ffe2c067530 RSI: 0000000000000011 RDI: 0000000000000003 RBP: 00007ffe2c0675d0 R08: 00007ffe2c067550 R09: 00007ffe2c067550 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe2c067750 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: CR2: 00000000000007a8 ---[ end trace 0000000000000000 ]--- Reported-by: syzbot+c74fea926a78b8a91042@syzkaller.appspotmail.com Fixes: ebdfefc ("io_uring/sqpoll: fix io-wq affinity when IORING_SETUP_SQPOLL is used") Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de> Link: https://lore.kernel.org/r/87v8cybuo6.fsf@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

From: Gabriel Krisman Bertazi <krisman@suse.de> [ upstream commit bd6fc5d ] Syzbot reported a null-ptr-deref of sqd->thread inside io_sqpoll_wq_cpu_affinity. It turns out the sqd->thread can go away from under us during io_uring_register, in case the process gets a fatal signal during io_uring_register. It is not particularly hard to hit the race, and while I am not sure this is the exact case hit by syzbot, it solves it. Finally, checking ->thread is enough to close the race because we locked sqd while "parking" the thread, thus preventing it from going away. I reproduced it fairly consistently with a program that does: int main(void) { ... io_uring_queue_init(RING_LEN, &ring1, IORING_SETUP_SQPOLL); while (1) { io_uring_register_iowq_aff(ring, 1, &mask); } } Executed in a loop with timeout to trigger SIGTERM: while true; do timeout 1 /a.out ; done This will hit the following BUG() in very few attempts. BUG: kernel NULL pointer dereference, address: 00000000000007a8 PGD 800000010e949067 P4D 800000010e949067 PUD 10e46e067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 15715 Comm: dead-sqpoll Not tainted 6.5.0-rc7-next-20230825-g193296236fa0-dirty #23 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:io_sqpoll_wq_cpu_affinity+0x27/0x70 Code: 90 90 90 0f 1f 44 00 00 55 53 48 8b 9f 98 03 00 00 48 85 db 74 4f 48 89 df 48 89 f5 e8 e2 f8 ff ff 48 8b 43 38 48 85 c0 74 22 <48> 8b b8 a8 07 00 00 48 89 ee e8 ba b1 00 00 48 89 df 89 c5 e8 70 RSP: 0018:ffffb04040ea7e70 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff93c010749e40 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffa7653331 RDI: 00000000ffffffff RBP: ffffb04040ea7eb8 R08: 0000000000000000 R09: c0000000ffffdfff R10: ffff93c01141b600 R11: ffffb04040ea7d18 R12: ffff93c00ea74840 R13: 0000000000000011 R14: 0000000000000000 R15: ffff93c00ea74800 FS: 00007fb7c276ab80(0000) GS:ffff93c36f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000007a8 CR3: 0000000111634003 CR4: 0000000000370ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? page_fault_oops+0x154/0x440 ? do_user_addr_fault+0x174/0x7b0 ? exc_page_fault+0x63/0x140 ? asm_exc_page_fault+0x22/0x30 ? io_sqpoll_wq_cpu_affinity+0x27/0x70 __io_register_iowq_aff+0x2b/0x60 __io_uring_register+0x614/0xa70 __x64_sys_io_uring_register+0xaa/0x1a0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7fb7c226fec9 Code: 2e 00 b8 ca 00 00 00 0f 05 eb a5 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 97 7f 2d 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe2c0674f8 EFLAGS: 00000246 ORIG_RAX: 00000000000001ab RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fb7c226fec9 RDX: 00007ffe2c067530 RSI: 0000000000000011 RDI: 0000000000000003 RBP: 00007ffe2c0675d0 R08: 00007ffe2c067550 R09: 00007ffe2c067550 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe2c067750 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: CR2: 00000000000007a8 ---[ end trace 0000000000000000 ]--- Reported-by: syzbot+c74fea926a78b8a91042@syzkaller.appspotmail.com Fixes: ebdfefc ("io_uring/sqpoll: fix io-wq affinity when IORING_SETUP_SQPOLL is used") Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de> Link: https://lore.kernel.org/r/87v8cybuo6.fsf@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0b0747d upstream. The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0b0747d upstream. The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 raspberrypi#10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 raspberrypi#11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 raspberrypi#12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 raspberrypi#13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 raspberrypi#14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 raspberrypi#15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 raspberrypi#16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 raspberrypi#17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 raspberrypi#18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 raspberrypi#19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 raspberrypi#20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 raspberrypi#21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 raspberrypi#22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 raspberrypi#23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 raspberrypi#24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 raspberrypi#25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 raspberrypi#26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 raspberrypi#27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 raspberrypi#10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 raspberrypi#11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 raspberrypi#12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 raspberrypi#13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 raspberrypi#14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 raspberrypi#15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 raspberrypi#16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 raspberrypi#17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCX: test_and_clear_cpu_idle() should always clear SMT mask

Andrii Nakryiko says: ==================== BPF register bounds logic and testing improvements This patch set adds a big set of manual and auto-generated test cases validating BPF verifier's register bounds tracking and deduction logic. See details in the last patch. We start with building a tester that validates existing <range> vs <scalar> verifier logic for range bounds. To make all this work, BPF verifier's logic needed a bunch of improvements to handle some cases that previously were not covered. This had no implications as to correctness of verifier logic, but it was incomplete enough to cause significant disagreements with alternative implementation of register bounds logic that tests in this patch set implement. So we need BPF verifier logic improvements to make all the tests pass. This is what we do in patches #3 through raspberrypi#9. The end goal of this work, though, is to extend BPF verifier range state tracking such as to allow to derive new range bounds when comparing non-const registers. There is some more investigative work required to investigate and fix existing potential issues with range tracking as part of ALU/ALU64 operations, so <range> x <range> part of v5 patch set ([0]) is dropped until these issues are sorted out. For now, we include preparatory refactorings and clean ups, that set up BPF verifier code base to extend the logic to <range> vs <range> logic in subsequent patch set. Patches raspberrypi#10-raspberrypi#16 perform preliminary refactorings without functionally changing anything. But they do clean up check_cond_jmp_op() logic and generalize a bunch of other pieces in is_branch_taken() logic. [0] https://patchwork.kernel.org/project/netdevbpf/list/?series=797178&state=* v5->v6: - dropped <range> vs <range> patches (original patches raspberrypi#18 through raspberrypi#23) to add more register range sanity checks and fix preexisting issues; - comments improvements, addressing other feedback on first 17 patches (Eduard, Alexei); v4->v5: - added entirety of verifier reg bounds tracking changes, now handling <range> vs <range> cases (Alexei); - added way more comments trying to explain why deductions added are correct, hopefully they are useful and clarify things a bit (Daniel, Shung-Hsi); - added two preliminary selftests fixes necessary for RELEASE=1 build to work again, it keeps breaking. v3->v4: - improvements to reg_bounds tester (progress report, split 32-bit and 64-bit ranges, fix various verbosity output issues, etc); v2->v3: - fix a subtle little-endianness assumption inside parge_reg_state() (CI); v1->v2: - fix compilation when building selftests with llvm-16 toolchain (CI). ==================== Link: https://lore.kernel.org/r/20231102033759.2541186-1-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>

[ Upstream commit 769e6a1 ] ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 #1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) #2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) #3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 #4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 #5 0x55c94045c776 in ui_browser__show ui/browser.c:288 #6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 #7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 #8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 #9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 #10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 #11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 #12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 #13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 #14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 #15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 #16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 #17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 #18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 #19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 #20 0x55c9400e53ad in main tools/perf/perf.c:561 #21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 #23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Ben Gainey <ben.gainey@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Li Dong <lidong@vivo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Paran Lee <p4ranlee@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Yanteng Si <siyanteng@loongson.cn> Cc: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20240507183545.1236093-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

nomis closed this as completed May 17, 2012

alanbork mentioned this issue May 16, 2022

KMS: 4096x2160p60 causes hang/unresponsive pi unless overclocked #5034

Closed

0lxb pushed a commit to 0lxb/rpi_linux that referenced this issue Jan 30, 2024

Merge pull request raspberrypi#23 from sched-ext/atropos-updates

711b42e

SCX: test_and_clear_cpu_idle() should always clear SMT mask

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Power management #23

Power management #23

nomis commented May 16, 2012

popcornmix commented May 17, 2012

nomis commented May 17, 2012

popcornmix commented May 17, 2012

nomis commented May 17, 2012

popcornmix commented May 17, 2012

nomis commented May 17, 2012

Power management #23

Power management #23

Comments

nomis commented May 16, 2012

popcornmix commented May 17, 2012

nomis commented May 17, 2012

popcornmix commented May 17, 2012

nomis commented May 17, 2012

popcornmix commented May 17, 2012

nomis commented May 17, 2012