Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Request: Enable ems_usb module (USB-CAN-Adapter) #3716

Open
Jeroenve opened this issue Jul 9, 2020 · 1 comment
Open

Request: Enable ems_usb module (USB-CAN-Adapter) #3716

Jeroenve opened this issue Jul 9, 2020 · 1 comment

Comments

@Jeroenve
Copy link

Jeroenve commented Jul 9, 2020

Like in #2066 is done, I would like to request support for adding the ems_usb module like popular Desktop distributions have.

The ems_usb provides support for SocketCAN device like https://www.ems-wuensche.com/?post_type=product&p=746
pelwell added a commit that referenced this issue Jul 9, 2020
@pelwell
configs: Add CAN_EMS_USB=m
31c693a 
See: #3716

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
pelwell added a commit that referenced this issue Jul 9, 2020
@pelwell
configs: Add CAN_EMS_USB=m
f56f28f 
See: #3716

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
pelwell added a commit that referenced this issue Jul 9, 2020
@pelwell
configs: Add CAN_EMS_USB=m
90904ae 
See: #3716

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
@pelwell
Copy link
Contributor

pelwell commented Jul 9, 2020

CONFIG_CAN_EMS_USB=m has been added to the Pi defconfigs in the active branches - rpi-5.4.y, rpi-5.6.y and rpi-5.7.y. The module will appear in future kernel releases.

popcornmix pushed a commit that referenced this issue Jul 13, 2020
@pelwell @popcornmix
configs: Add CAN_EMS_USB=m
116c0ac 
See: #3716

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
popcornmix pushed a commit that referenced this issue Jul 13, 2020
@pelwell @popcornmix
configs: Add CAN_EMS_USB=m
1abb95b 
See: #3716

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
popcornmix added a commit to raspberrypi/firmware that referenced this issue Jul 13, 2020
@popcornmix
kernel: Bump to 5.4.51
7e74bcb 
kernel: vc4_hdmi: Support HBR audio
See: raspberrypi/linux#3717

kernel: OV7251 overlay and defconfig
See: raspberrypi/linux#3714

kernel: Imx290 & unicam v4l2-compliance fixes
See: raspberrypi/linux#3712

kernel: Enhances the DAC+ driver to control the optional headphone amplifier
See: raspberrypi/linux#3711

kernel: OV9281 driver and overlay
See: raspberrypi/linux#3709

kernel: dtoverlays: Fixup imx219 and imx477 overlays due to parsing failures
See: raspberrypi/linux#3706

kernel: FKMS: max refresh rate and blocking 1366x768
See: raspberrypi/linux#3704

kernel: Fix lockups and IRQ jitter on multicore RasPis
See: raspberrypi/linux#3703

kernel: dts: Further simplify firmware clocks
See: raspberrypi/linux#3609

kernel: configs: Add CAN_EMS_USB=m
See: raspberrypi/linux#3716

kernel: configs: Enable CONFIG_BLK_DEV_NVME=m

kernel: ARM: dts: Make bcm2711 dts more like 5.7

firmware: arm_loader: Don't enable the ARM USB IRQ
See: raspberrypi/linux#3703

firmware: hdmi: Remove M2MC/BVB min turbo clock request
popcornmix added a commit to Hexxeh/rpi-firmware that referenced this issue Jul 13, 2020
@popcornmix
kernel: Bump to 5.4.51
8382ece 
kernel: vc4_hdmi: Support HBR audio
See: raspberrypi/linux#3717

kernel: OV7251 overlay and defconfig
See: raspberrypi/linux#3714

kernel: Imx290 & unicam v4l2-compliance fixes
See: raspberrypi/linux#3712

kernel: Enhances the DAC+ driver to control the optional headphone amplifier
See: raspberrypi/linux#3711

kernel: OV9281 driver and overlay
See: raspberrypi/linux#3709

kernel: dtoverlays: Fixup imx219 and imx477 overlays due to parsing failures
See: raspberrypi/linux#3706

kernel: FKMS: max refresh rate and blocking 1366x768
See: raspberrypi/linux#3704

kernel: Fix lockups and IRQ jitter on multicore RasPis
See: raspberrypi/linux#3703

kernel: dts: Further simplify firmware clocks
See: raspberrypi/linux#3609

kernel: configs: Add CAN_EMS_USB=m
See: raspberrypi/linux#3716

kernel: configs: Enable CONFIG_BLK_DEV_NVME=m

kernel: ARM: dts: Make bcm2711 dts more like 5.7

firmware: arm_loader: Don't enable the ARM USB IRQ
See: raspberrypi/linux#3703

firmware: hdmi: Remove M2MC/BVB min turbo clock request
popcornmix pushed a commit that referenced this issue Jul 20, 2020
@pelwell @popcornmix
configs: Add CAN_EMS_USB=m
3b166e1 
See: #3716

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
popcornmix pushed a commit that referenced this issue Aug 12, 2020
@pelwell @popcornmix
configs: Add CAN_EMS_USB=m
83487af 
See: #3716

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
popcornmix pushed a commit that referenced this issue Aug 19, 2020
@pelwell @popcornmix
configs: Add CAN_EMS_USB=m
b1616f2 
See: #3716

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
popcornmix pushed a commit that referenced this issue Sep 1, 2020
@pelwell @popcornmix
configs: Add CAN_EMS_USB=m
5f8180d 
See: #3716

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@Jeroenve @pelwell