VC4 kernel framework driver - memory leak fixup #2325
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ Upstream commit 283ca52 ] When tracing and networking programs are both attached in the system and both use event-output helpers that eventually call into perf_event_output(), then we could end up in a situation where the tracing attached program runs in user context while a cls_bpf program is triggered on that same CPU out of softirq context. Since both rely on the same per-cpu perf_sample_data, we could potentially corrupt it. This can only ever happen in a combination of the two types; all tracing programs use a bpf_prog_active counter to bail out in case a program is already running on that CPU out of a different context. XDP and cls_bpf programs by themselves don't have this issue as they run in the same context only. Therefore, split both perf_sample_data so they cannot be accessed from each other. Fixes: 20b9d7a ("bpf: avoid excessive stack usage for perf_sample_data") Reported-by: Alexei Starovoitov <ast@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Song Liu <songliubraving@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6d59b7d ] The assumption of unconditionally reloading skb pointers on BPF helper calls where bpf_helper_changes_pkt_data() holds true is wrong. There can be different contexts where the BPF helper would enforce a reload such as in case of XDP. Here, we do have a struct xdp_buff instead of struct sk_buff as context, thus this will access garbage. JITs only ever need to deal with cached skb pointer reload when ld_abs/ind was seen, therefore guard the reload behind SEEN_SKB only. Tested on s390x. Fixes: 9db7f2b ("s390/bpf: recache skb->data/hlen for skb_vlan_push/pop") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 87338c8 ] The assumption of unconditionally reloading skb pointers on BPF helper calls where bpf_helper_changes_pkt_data() holds true is wrong. There can be different contexts where the helper would enforce a reload such as in case of XDP. Here, we do have a struct xdp_buff instead of struct sk_buff as context, thus this will access garbage. JITs only ever need to deal with cached skb pointer reload when ld_abs/ind was seen, therefore guard the reload behind SEEN_SKB. Fixes: 156d0e2 ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Sandipan Das <sandipan@linux.vnet.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 07aee94 ] When LD_ABS/IND is used in the program, and we have a BPF helper call that changes packet data (bpf_helper_changes_pkt_data() returns true), then in case of sparc JIT, we try to reload cached skb data from bpf2sparc[BPF_REG_6]. However, there is no such guarantee or assumption that skb sits in R6 at this point, all helpers changing skb data only have a guarantee that skb sits in R1. Therefore, store BPF R1 in L7 temporarily and after procedure call use L7 to reload cached skb data. skb sitting in R6 is only true at the time when LD_ABS/IND is executed. Fixes: 7a12b50 ("sparc64: Add eBPF JIT.") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
From: Edward Cree <ecree@solarflare.com> [ Upstream commit 4374f25 ] Incorrect signed bounds were being computed. If the old upper signed bound was positive and the old lower signed bound was negative, this could cause the new upper signed bound to be too low, leading to security issues. Fixes: b03c9f9 ("bpf/verifier: track signed and unsigned min/max values") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Acked-by: Alexei Starovoitov <ast@kernel.org> [jannh@google.com: changed description to reflect bug impact] Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
From: Jann Horn <jannh@google.com> [ Upstream commit 95a762e ] Distinguish between BPF_ALU64|BPF_MOV|BPF_K (load 32-bit immediate, sign-extended to 64-bit) and BPF_ALU|BPF_MOV|BPF_K (load 32-bit immediate, zero-padded to 64-bit); only perform sign extension in the first case. Starting with v4.14, this is exploitable by unprivileged users as long as the unprivileged_bpf_disabled sysctl isn't set. Debian assigned CVE-2017-16995 for this issue. v3: - add CVE number (Ben Hutchings) Fixes: 4846113 ("bpf: allow access into map value arrays") Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
From: Jann Horn <jannh@google.com> [ Upstream commit 0c17d1d ] Properly handle register truncation to a smaller size. The old code first mirrors the clearing of the high 32 bits in the bitwise tristate representation, which is correct. But then, it computes the new arithmetic bounds as the intersection between the old arithmetic bounds and the bounds resulting from the bitwise tristate representation. Therefore, when coerce_reg_to_32() is called on a number with bounds [0xffff'fff8, 0x1'0000'0007], the verifier computes [0xffff'fff8, 0xffff'ffff] as bounds of the truncated number. This is incorrect: The truncated number could also be in the range [0, 7], and no meaningful arithmetic bounds can be computed in that case apart from the obvious [0, 0xffff'ffff]. Starting with v4.14, this is exploitable by unprivileged users as long as the unprivileged_bpf_disabled sysctl isn't set. Debian assigned CVE-2017-16996 for this issue. v2: - flip the mask during arithmetic bounds calculation (Ben Hutchings) v3: - add CVE number (Ben Hutchings) Fixes: b03c9f9 ("bpf/verifier: track signed and unsigned min/max values") Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
From: Jann Horn <jannh@google.com> [ Upstream commit 468f6ea ] 32-bit ALU ops operate on 32-bit values and have 32-bit outputs. Adjust the verifier accordingly. Fixes: f1174f7 ("bpf/verifier: rework value tracking") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
From: Jann Horn <jannh@google.com> Prevent indirect stack accesses at non-constant addresses, which would permit reading and corrupting spilled pointers. Fixes: f1174f7 ("bpf/verifier: rework value tracking") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
From: Jann Horn <jannh@google.com> [ Upstream commit a5ec6ae ] Force strict alignment checks for stack pointers because the tracking of stack spills relies on it; unaligned stack accesses can lead to corruption of spilled registers, which is exploitable. Fixes: f1174f7 ("bpf/verifier: rework value tracking") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
From: Jann Horn <jannh@google.com> [ Upstream commit 179d1c5 ] This could be made safe by passing through a reference to env and checking for env->allow_ptr_leaks, but it would only work one way and is probably not worth the hassle - not doing it will not directly lead to program rejection. Fixes: f1174f7 ("bpf/verifier: rework value tracking") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
From: Alexei Starovoitov <ast@kernel.org> [ Upstream commit bb7f0f9 ] There were various issues related to the limited size of integers used in the verifier: - `off + size` overflow in __check_map_access() - `off + reg->off` overflow in check_mem_access() - `off + reg->var_off.value` overflow or 32-bit truncation of `reg->var_off.value` in check_mem_access() - 32-bit truncation in check_stack_boundary() Make sure that any integer math cannot overflow by not allowing pointer math with large values. Also reduce the scope of "scalar op scalar" tracking. Fixes: f1174f7 ("bpf/verifier: rework value tracking") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
From: Jann Horn <jannh@google.com> [ Upstream commit 2255f8d ] These tests should cover the following cases: - MOV with both zero-extended and sign-extended immediates - implicit truncation of register contents via ALU32/MOV32 - implicit 32-bit truncation of ALU32 output - oversized register source operand for ALU32 shift - right-shift of a number that could be positive or negative - map access where adding the operation size to the offset causes signed 32-bit overflow - direct stack access at a ~4GiB offset Also remove the F_LOAD_WITH_STRICT_ALIGNMENT flag from a bunch of tests that should fail independent of what flags userspace passes. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d151558 upstream. linux/compiler.h is included indirectly by linux/types.h via uapi/linux/types.h -> uapi/linux/posix_types.h -> linux/stddef.h -> uapi/linux/stddef.h and is needed to provide a proper definition of offsetof. Unfortunately, compiler.h requires a definition of smp_read_barrier_depends() for defining lockless_dereference() and soon for defining READ_ONCE(), which means that all users of READ_ONCE() will need to include asm/barrier.h to avoid splats such as: In file included from include/uapi/linux/stddef.h:1:0, from include/linux/stddef.h:4, from arch/h8300/kernel/asm-offsets.c:11: include/linux/list.h: In function 'list_empty': >> include/linux/compiler.h:343:2: error: implicit declaration of function 'smp_read_barrier_depends' [-Werror=implicit-function-declaration] smp_read_barrier_depends(); /* Enforce dependency ordering from x */ \ ^ A better alternative is to include asm/barrier.h in linux/compiler.h, but this requires a type definition for "bool" on some architectures (e.g. x86), which is defined later by linux/types.h. Type "bool" is also used directly in linux/compiler.h, so the whole thing is pretty fragile. This patch splits compiler.h in two: compiler_types.h contains type annotations, definitions and the compiler-specific parts, whereas compiler.h #includes compiler-types.h and additionally defines macros such as {READ,WRITE.ACCESS}_ONCE(). uapi/linux/stddef.h and linux/linkage.h are then moved over to include linux/compiler_types.h, which fixes the build for h8 and blackfin. Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1508840570-22169-2-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 9704f81 which was upstream commit a94b936. Shouldn't have been here, sorry about that. Reported-by: Chris Rankin <rankincj@gmail.com> Reported-by: Willy Tarreau <w@1wt.eu> Cc: Ido Schimmel <idosch@idosch.org> Cc: Ozgur <ozgur@goosey.org> Cc: Wei Wang <weiwan@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a77cff upstream. This will enable more straightforward comparisons, and it also makes the files 100% identical. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/407b2aaa317741f48fcf821592c0e96ab3be1890.1509974346.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3bd51c5 upstream. Replace the nasty diff checks in the objtool Makefile with a clean bash script, and make the warnings more specific. Heavily inspired by tools/perf/check-headers.sh. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/ab015f15ccd8c0c6008493c3c6ee3d495eaf2927.1509974346.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9eb7198 upstream. Stephen Rothwell reported this cross-compilation build failure: | In file included from orc_dump.c:19:0: | orc.h:21:10: fatal error: asm/orc_types.h: No such file or directory | ... Caused by: 6a77cff ("objtool: Move synced files to their original relative locations") Use the proper arch header files location, not the host-arch location. Bisected-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linux-Next Mailing List <linux-next@vger.kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171108030152.bd76eahiwjwjt3kp@treble Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a356d2a upstream. objtool grew this new warning: Warning: synced file at 'tools/objtool/arch/x86/include/asm/inat.h' differs from latest kernel version at 'arch/x86/include/asm/inat.h' which upstream header grew new INAT_SEG_* definitions. Sync up the tooling version of the header. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14c47b5 upstream. The new ORC unwinder breaks the build of a 64-bit kernel on a 32-bit host. Building the kernel on a i386 or x32 host fails with: orc_dump.c: In function 'orc_dump': orc_dump.c:105:26: error: passing argument 2 of 'elf_getshdrnum' from incompatible pointer type [-Werror=incompatible-pointer-types] if (elf_getshdrnum(elf, &nr_sections)) { ^ In file included from /usr/local/include/gelf.h:32:0, from elf.h:22, from warn.h:26, from orc_dump.c:20: /usr/local/include/libelf.h:304:12: note: expected 'size_t * {aka unsigned int *}' but argument is of type 'long unsigned int *' extern int elf_getshdrnum (Elf *__elf, size_t *__dst); ^~~~~~~~~~~~~~ orc_dump.c:190:17: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'Elf64_Sxword {aka long long int}' [-Werror=format=] printf("%s+%lx:", name, rela.r_addend); ~~^ ~~~~~~~~~~~~~ %llx Fix the build failure. Another problem is that if the user specifies HOSTCC or HOSTLD variables, they are ignored in the objtool makefile. Change the Makefile to respect these variables. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sven Joachim <svenjoac@gmx.de> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 627fce1 ("objtool: Add ORC unwind table generation") Link: http://lkml.kernel.org/r/19f0e64d8e07e30a7b307cd010eb780c404fe08d.1512252895.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5b5fab upstream Update x86-opcode-map.txt based on the October 2017 Intel SDM publication. Fix INVPID to INVVPID. Add UD0 and UD1 instruction opcodes. Also sync the objtool and perf tooling copies of this file. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/aac062d7-c0f6-96e3-5c92-ed299e2bd3da@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32d0b95 upstream. [note, only the inat.h portion, to get objtool back in sync - gregkh] b0caa8c8c6bbc422bc3c32b64852d6d618f32b49 Mon Sep 17 00:00:00 2001 When computing a linear address and segmentation is used, we need to know the base address of the segment involved in the computation. In most of the cases, the segment base address will be zero as in USER_DS/USER32_DS. However, it may be possible that a user space program defines its own segments via a local descriptor table. In such a case, the segment base address may not be zero. Thus, the segment base address is needed to calculate correctly the linear address. If running in protected mode, the segment selector to be used when computing a linear address is determined by either any of segment override prefixes in the instruction or inferred from the registers involved in the computation of the effective address; in that order. Also, there are cases when the segment override prefixes shall be ignored (i.e., code segments are always selected by the CS segment register; string instructions always use the ES segment register when using rDI register as operand). In long mode, segment registers are ignored, except for FS and GS. In these two cases, base addresses are obtained from the respective MSRs. For clarity, this process can be split into four steps (and an equal number of functions): determine if segment prefixes overrides can be used; parse the segment override prefixes, and use them if found; if not found or cannot be used, use the default segment registers associated with the operand registers. Once the segment register to use has been identified, read its value to obtain the segment selector. The method to obtain the segment selector depends on several factors. In 32-bit builds, segment selectors are saved into a pt_regs structure when switching to kernel mode. The same is also true for virtual-8086 mode. In 64-bit builds, segmentation is mostly ignored, except when running a program in 32-bit legacy mode. In this case, CS and SS can be obtained from pt_regs. DS, ES, FS and GS can be read directly from the respective segment registers. In order to identify the segment registers, a new set of #defines is introduced. It also includes two special identifiers. One of them indicates when the default segment register associated with instruction operands shall be used. Another one indicates that the contents of the segment register shall be ignored; this identifier is used when in long mode. Improvements-by: Borislav Petkov <bp@suse.de> Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: ricardo.neri@intel.com Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Qiaowei Ren <qiaowei.ren@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Colin Ian King <colin.king@canonical.com> Cc: Chen Yucong <slaoub@gmail.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Garnier <thgarnie@google.com> Link: https://lkml.kernel.org/r/1509135945-13762-14-git-send-email-ricardo.neri-calderon@linux.intel.com Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7bbcbd3 upstream. The recent cpu_entry_area changes fail to compile on 32-bit when BIGSMP=y and NR_CPUS=512, because the fixmap area becomes too big. Limit the number of CPUs with BIGSMP to 64, which is already way to big for 32-bit, but it's at least a working limitation. We performed a quick survey of 32-bit-only machines that might be affected by this change negatively, but found none. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c053449 upstream. The check for a present page in printk_prot(): if (!pgprot_val(prot)) { /* Not present */ is bogus. If a PTE is set to PAGE_NONE then the pgprot_val is not zero and the entry is decoded in bogus ways, e.g. as RX GLB. That is confusing when analyzing mapping correctness. Check for the present bit to make an informed decision. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 146122e upstream. The address hints are a trainwreck. The array entry numbers have to kept magically in sync with the actual hints, which is doomed as some of the array members are initialized at runtime via the entry numbers. Designated initializers have been around before this code was implemented.... Use the entry numbers to populate the address hints array and add the missing bits and pieces. Split 32 and 64 bit for readability sake. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 49275fe upstream. The kernel is very erratic as to which pagetables have _PAGE_USER set. The vsyscall page gets lucky: it seems that all of the relevant pagetables are among the apparently arbitrary ones that set _PAGE_USER. Rather than relying on chance, just explicitly set _PAGE_USER. This will let us clean up pagetable setup to stop setting _PAGE_USER. The added code can also be reused by pagetable isolation to manage the _PAGE_USER bit in the usermode tables. [ tglx: Folded paravirt fix from Juergen Gross ] Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4831b77 upstream. If something goes wrong with pagetable setup, vsyscall=native will accidentally fall back to emulation. Make it warn and fail so that we notice. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c10e83f upstream. In order to sanitize the LDT initialization on x86 arch_dup_mmap() must be allowed to fail. Fix up all instances. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: dan.j.williams@intel.com Cc: hughd@google.com Cc: keescook@google.com Cc: kirill.shutemov@linux.intel.com Cc: linux-mm@kvack.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2b3496 upstream. The LDT is duplicated on fork() and on exec(), which is wrong as exec() should start from a clean state, i.e. without LDT. To fix this the LDT duplication code will be moved into arch_dup_mmap() which is only called for fork(). This introduces a locking problem. arch_dup_mmap() holds mmap_sem of the parent process, but the LDT duplication code needs to acquire mm->context.lock to access the LDT data safely, which is the reverse lock order of write_ldt() where mmap_sem nests into context.lock. Solve this by introducing a new rw semaphore which serializes the read/write_ldt() syscall operations and use context.lock to protect the actual installment of the LDT descriptor. So context.lock stabilizes mm->context.ldt and can nest inside of the new semaphore or mmap_sem. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: dan.j.williams@intel.com Cc: hughd@google.com Cc: keescook@google.com Cc: kirill.shutemov@linux.intel.com Cc: linux-mm@kvack.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the removal of the vc_cma driver, mkknlimg lost an indication that the user had built a downstream kernel. Update the script, adding a few more key strings, in case it is still being used. Note that mkknlimg is now deprecated, except to tag kernels as upstream (283x), and thus requiring upstream DTBs. See: #2239 Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Uses the debugfs I/F to provide access to the AXI bus performance monitors. Requires the new mailbox peripheral access for access to the VPU performance registers, system bus access is done using direct register reads. Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
This is to workaround for a possible issue in the wireless chip firmware where some packets with higher priorities seem to go missing. See #1342 for details.
This driver communicates with the Atmel microcontroller for sequencing
the poweron of the TC358762 DSI-DPI bridge and controlling the
backlight PWM.
The following lines are required in config.txt, to keep the firmware
from trying to bash our I2C lines and steal the DSI interrupts:
disable_touchscreen=1
ignore_lcd=2
mask_gpu_interrupt1=0x1000
This means that the firmware won't power on the panel at boot time (no
rainbow) and the touchscreen input won't work. The native input
driver for the touchscreen still needs to be written.
v2: Set the same default orientation as the closed source firmware
used, which is the best for viewing angle.
Signed-off-by: Eric Anholt <eric@anholt.net>
If the i2c driver hadn't pobed before the panel driver probes, then the client would be NULL but we were looking for an ERR_PTR in the error case. Signed-off-by: Eric Anholt <eric@anholt.net>
Commit 488f9bc slightly increased the reported rate of PLLD, so the clk driver decided that PLLD/3/8 was now higher than our requested pixel clock rate and rejected it in favor of PLLD/4/8, which then ran the pixel clock way out of spec. By bumping the requested clock rate just slightly, we get back to PLLD/3/8 like we wanted and the panel displays content again. Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
This ensures that the screen goes blank during DPMS (screensaver), including the cursor. Planes don't necessarily get disabled during CRTC disable, so we need to be careful to not leave them on or turn them back on early. Signed-off-by: Eric Anholt <eric@anholt.net>
The documentation said to use src_w here, and I didn't consider that we actually needed to be using pitch somewhere in our setup. Fixes scanout on my DSI panel when X11 does initial setup with 1920x1080 HDMI and 800x480 DSI both at 0,0 of the same framebuffer. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 98830d9 ("drm/vc4: Add T-format scanout support.")
This is a test patch for brcmfmac from Franky Lin at Broadcom to disable ARP offloading when in promiscuous mode, re-enabling the ability to sniff ARP packets over WiFi. See: #2171 Signed-off-by: Phil Elwell <phil@raspberrypi.org>
In brcmf_p2p_notify_rx_mgmt_p2p_probereq(), chanspec is assigned before the length of rxframe is validated. This could lead to uninitialized data being accessed (but not printed). Since we already have a perfectly good endian-swapped copy of rxframe->chanspec in ch.chspec, and ch.chspec is not modified by decchspec(), avoid the extra assignment and use ch.chspec in the debug print. Suggested-by: Mattias Nissler <mnissler@chromium.org> Signed-off-by: Kevin Cernekee <cernekee@chromium.org> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
brcmf_fweh_process_event() sets event->datalen to the endian-swapped value of event_packet->msg.datalen, which is the same as emsg.datalen. This length is already validated in brcmf_fweh_process_event(), so there is no need to check it again upon dequeuing the event. Suggested-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kevin Cernekee <cernekee@chromium.org>
The MCP2515 datasheet clearly describes a level-triggered interrupt pin. Therefore the receiving interrupt controller must also be configured for level-triggered operation otherwise there is a danger of a missed interrupt condition blocking all subsequent interrupts. The ONESHOT flag ensures that the interrupt is masked until the threaded interrupt handler exits. Rather than change the flags globally (they must have worked for at least one user), allow the flags to be overridden from Device Tree in the event that the device has a DT node. See: #2175 #2263 Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Driver was using a fixed resolution, this commit adds touchscreen size, and coordinate flip and swap features via device tree overlays. Adds overrides so the VC4 can adjust the DT parameters appropriately; there is a newer version of the VC4 side driver that can now set up the appropriate DT values if required. Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
There is a standard mechanism for locating and using a MAC address from the Device Tree. Use this facility in the lan78xx driver to support applications without programmed EEPROM or OTP. Signed-off-by: Phil Elwell <phil@raspberrypi.org>
lan78xx_read_otp tries to return -EINVAL in the event of invalid OTP content, but the value gets overwritten before it is returned and the read goes ahead anyway. Make the read conditional as it should be and preserve the error code. Signed-off-by: Phil Elwell <phil@raspberrypi.org>
For applications of the LAN78xx that don't have valid programmed EEPROMs or OTPs, enabling both LEDs and auto-negotiation by default seems reasonable. Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Some Raspberry Pis have limited RAM and most users won't use the
cgroup memory support so it is disabled by default. Enable with:
cgroup_enable=memory
See: #1950
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Moving the bcm2835 thermal driver to the broadcom directory prevented it from getting enabled for arm64 builds, since the broadcom directory is only available when 32-bit specific ARCH_BCM is set. Fix this by enabling the Broadcom menu for ARCH_BCM or ARCH_BCM2835. Fixes: 6892cf0 ("thermal: bcm2835: move to the broadcom subdirectory") Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Allen Wild <allenwild93@gmail.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
[ Upstream commit 7e5d1fd ] Notifications for devices without bus or class set get dropped by dev_uevent_filter(). Adding the class to the exported child matches what the GPIO subsystem is doing. With this change exporting a channel triggers a udev event, which gives userspace a chance to fixup permissions and makes it possible for non-root users to make use of the PWM subsystem. Signed-off-by: Gottfried Haider <gottfried.haider@gmail.com> CC: Thierry Reding <thierry.reding@gmail.com> CC: H Hartley Sweeten <hsweeten@visionengravers.com> CC: linux-pwm@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-rpi-kernel@lists.infradead.org Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
* Merged 'Fix a warning in DEBUG builds' (1c8b82b). * Updating some strings and copyright information. * Fix for handling high load of MIDI input and output. * Use dual rate oversampling ratio for 96kHz instead of single rate one. Signed-off-by: Giedrius Trainavicius <giedrius@blokas.io>
See: #2302 Signed-off-by: Phil Elwell <phil@raspberrypi.org>
It can be useful to be able to open multiple vchiq instances in a single process. This currently fails due to a debugfs collision, so make such a failure non-fatal. Signed-off-by: Phil Elwell <phil@raspberrypi.org>
As of Linux 4.12, the mcp23s08 driver moved from drivers/gpio to drivers/pinctrl. At the same time, the Kconfig symbols changed from CONFIG_GPIO_MCP23S08 to CONFIG_PINCTRL_MCP23S08, effectively removing the MCP23S17 from the downstream defconfigs. Restore support by adding CONFIG_PINCTRL_MCP23S08. See: #2311 Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Otherwise the backlight driver fails to build if the firmware loading driver is not in the kernel Signed-off-by: Alex Riesen <alexander.riesen@cetitec.com>
|
sorry, this turned out wrong. Not sure why it wants to merge the two branches... Closing. Will open an issue. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Hello,
On 29 Nov 2017 Stefan Schake provided a patch to fix a huge memory leak in the vc4 driver implementation as reported here: anholt#122
The location of the patch is:
https://github.com/anholt/linux/files/1514699/0001-drm-vc4-Release-fence-after-signalling.txt or can also be found attached to this pull request - 0001-drm-vc4-Release-fence-after-signalling.txt
Can this be included in one of the next 4.14.y releases, please? I have been running it for more than a month now and it works as expected and without any side (d)effects.
Thank you,
-Nikolay