Modified the master i2c support for the bcm2708 so that i2c repeated #493
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
commit ee7289b upstream. For sync_read/write, it may do multi stripe operations.If one of those met erro, we return the former successed size rather than a error value. There is a exception for write-operation met -EOLDSNAPC.If this occur,we retry the whole write again. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 03507db upstream. rbd_osd_req_create() needs to know the snapshot context size to create a buffer large enough to send it with the message front. It gets this from the img_request, which was not set for the obj_request yet. This resulted in trying to write past the end of the front payload, hitting this BUG: libceph: BUG_ON(p > msg->front.iov_base + msg->front.iov_len); Fix this by associating the obj_request with its img_request immediately after it's created, before the osd request is created. Fixes: http://tracker.ceph.com/issues/5760 Suggested-by: Alex Elder <alex.elder@linaro.org> Signed-off-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Alex Elder <alex.elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c354557 upstream. The order parameter is sometimes NULL in _rbd_dev_v2_snap_size(), but the dout() always derefences it. Move this to another dout() protected by a check that order is non-NULL. Signed-off-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <alex.elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd935f4 upstream. Without a way to flush the osd client's notify workqueue, a watch event that is unregistered could continue receiving callbacks indefinitely. Unregistering the event simply means no new notifies are added to the queue, but there may still be events in the queue that will call the watch callback for the event. If the queue is flushed after the event is unregistered, the caller can be sure no more watch callbacks will occur for the canceled watch. Signed-off-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9abc599 upstream. To ensure rbd_dev is not used after it's released, flush all pending notify callbacks before calling rbd_dev_image_release(). No new notifies can be added to the queue at this point because the watch has already be unregistered with the osd_client. Signed-off-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 20e0af6 upstream. The only user of rbd_obj_notify_ack() is rbd_watch_cb(). It used asynchronously with no tracking of when the notify ack completes, so it may still be in progress when the osd_client is shut down. This results in a BUG() since the osd client assumes no requests are in flight when it stops. Since all notifies are flushed before the osd_client is stopped, waiting for the notify ack to complete before returning from the watch callback ensures there are no notify acks in flight during shutdown. Rename rbd_obj_notify_ack() to rbd_obj_notify_ack_sync() to reflect its new synchronous nature. Signed-off-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9875201 upstream. Removing a device deallocates the disk, unschedules the watch, and finally cleans up the rbd_dev structure. rbd_dev_refresh(), called from the watch callback, updates the disk size and rbd_dev structure. With no locking between them, rbd_dev_refresh() may use the device or rbd_dev after they've been freed. To fix this, check whether RBD_DEV_FLAG_REMOVING is set before updating the disk size in rbd_dev_refresh(). In order to prevent a race where rbd_dev_refresh() is already revalidating the disk when rbd_remove() is called, move the call to rbd_bus_del_dev() after the watch is unregistered and all notifies are complete. It's safe to defer deleting this structure because no new requests can be submitted once the RBD_DEV_FLAG_REMOVING is set, since the device cannot be opened. Fixes: http://tracker.ceph.com/issues/5636 Signed-off-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit efadc98 upstream. This prevents erroring out while adding a device when a snapshot unrelated to the current mapping is deleted between reading the snapshot context and reading the snapshot names. If the mapped snapshot name is not found an error still occurs as usual. Signed-off-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da6a6b6 upstream. rbd_snap_name() calls rbd_dev_v{1,2}_snap_name() depending on the format of the image. The format 1 version returns NULL on error, which is handled by the caller. The format 2 version returns an ERR_PTR, which the caller of rbd_snap_name() does not expect. Fortunately this is unlikely to occur in practice because rbd_snap_id_by_name() is called before rbd_snap_name(). This would hit similar errors to rbd_snap_name() (like the snapshot not existing) and return early, so rbd_snap_name() would not hit an error unless the snapshot was removed between the two calls or memory was exhausted. Use an ERR_PTR in rbd_dev_v1_snap_name() so that the specific error can be propagated, and it is consistent with rbd_dev_v2_snap_name(). Handle the ERR_PTR in the only rbd_snap_name() caller. Suggested-by: Alex Elder <alex.elder@linaro.org> Signed-off-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53ae3ac upstream. There is a slight chance that (timer) interrupts are triggered before a secondary CPU has been marked online with implications on softirq thread affinity. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Kirill Tkhai <tkhai@yandex.ru> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82b2f49 upstream. Secondary CPUs write to __boot_cpu_mode with caches disabled, and thus a cached value of __boot_cpu_mode may be incoherent with that in memory. This could lead to a failure to detect mismatched boot modes. This patch adds flushing to ensure that writes by secondaries to __boot_cpu_mode are made visible before we test against it. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 845ad05 upstream. Written by Catalin Marinas, tested by APM on storm platform. This is needed because of the failures encountered when running SpecWeb benchmark test. Signed-off-by: Feng Kan <fkan@apm.com> Acked-by: Kumar Sankaran <ksankaran@apm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6db83ce upstream. If context switching happens during executing fpsimd_flush_thread(), stale value in FPSIMD registers will be saved into current thread's fpsimd_state by fpsimd_thread_switch(). That may cause invalid initialization state for the new process, so disable preemption when executing fpsimd_flush_thread(). Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Jiang Liu <liuj97@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b22c03 upstream. In ftrace_syscall_enter(), syscall_get_arguments(..., 0, n, ...) if (i == 0) { <handle orig_x0> ...; n--;} memcpy(..., n * sizeof(args[0])); If 'number of arguments(n)' is zero and 'argument index(i)' is also zero in syscall_get_arguments(), none of arguments should be copied by memcpy(). Otherwise 'n--' can be a big positive number and unexpected amount of data will be copied. Tracing system calls which take no argument, say sync(void), may hit this case and eventually make the system corrupted. This patch fixes the issue both in syscall_get_arguments() and syscall_set_arguments(). Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df503ba upstream. With the spin-table SMP booting method, secondary CPUs poll a location passed in the DT. The foundation-v8.dts file doesn't have this memory reserved and there is a risk of Linux using it before secondary CPUs are started. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f3a1d7d upstream. This string has been moved to arch/arm64/kernel/cputable.c. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d651e4 upstream. Switching between reading the virtual or physical counters is problematic, as some core code wants a view of time before we're fully set up. Using a function pointer and switching the source after the first read can make time appear to go backwards, and having a check in the read function is an unfortunate block on what we want to be a fast path. Instead, this patch makes us always use the virtual counters. If we're a guest, or don't have hyp mode, we'll use the virtual timers, and as such don't care about CNTVOFF as long as it doesn't change in such a way as to make time appear to travel backwards. As the guest will use the virtual timers, a (potential) KVM host must use the physical timers (which can wake up the host even if they fire while a guest is executing), and hence a host must have CNTVOFF set to zero so as to have a consistent view of time between the physical timers and virtual counters. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0af0b18 upstream. In order to be able to use the virtual counter in a safe way, make sure it is initialized to zero before dropping to SVC. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Dave Martin <dave.martin@linaro.org> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f793c23 upstream. To use the virtual counters from the host, we need to ensure that CNTVOFF doesn't change unexpectedly. When we change to a guest, we replace the host's CNTVOFF, but we don't restore it when returning to the host. As the host sets CNTVOFF to zero, and never changes it, we can simply zero CNTVOFF when returning to the host. This patch adds said zeroing to the return to host path. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Christoffer Dall <cdall@cs.columbia.edu> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b5b6c9e upstream. The flush_dcache_page() function is called when the kernel modified a page cache page. Since the D-cache on AArch64 does not have aliases this function can simply mark the page as dirty for later flushing via set_pte_at()/__sync_icache_dcache() if the page is executable (to ensure the I-D cache coherency). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Will Deacon <will.deacon@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7249b79 upstream. The D-cache on AArch64 is VIPT non-aliasing, so there is no need to flush it for anonymous pages. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Will Deacon <will.deacon@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f00130 upstream. This provides better performance compared to Device GRE and also allows unaligned accesses. Such memory is intended to be used with standard RAM (e.g. framebuffers) and not I/O. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0abafa upstream. Commit f5a44db introduced a regression on filesystems created with the bigalloc feature (cluster size > blocksize). It causes xfstests generic/006 and /013 to fail with an unexpected JBD2 failure and transaction abort that leaves the test file system in a read only state. Other xfstests run on bigalloc file systems are likely to fail as well. The cause is the accidental use of a cluster mask where a cluster offset was needed in ext4_ext_map_blocks(). Signed-off-by: Eric Whitney <enwlinux@gmail.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…sh_ksyms_32.c commit ad70b02 upstream. Min_low_pfn and max_low_pfn were used in pfn_valid macro if defined CONFIG_FLATMEM. When the functions that use the pfn_valid is used in driver module, max_low_pfn and min_low_pfn is to undefined, and fail to build. ERROR: "min_low_pfn" [drivers/block/aoe/aoe.ko] undefined! ERROR: "max_low_pfn" [drivers/block/aoe/aoe.ko] undefined! make[2]: *** [__modpost] Error 1 make[1]: *** [modules] Error 2 This patch fix this problem. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
starts work for SMBus.
| u32 cdiv, stat; | ||
| bus_hz = clk_get_rate(bi->clk); | ||
| cdiv = bus_hz / baudrate; | ||
|
|
There was a problem hiding this comment.
This code should be here:
if (cdiv > 0xffff)
cdiv = 0xffff;
WM8804 can run with PLL frequencies of 256xfs and 128xfs for most sample rates. At 192kHz only 128xfs is supported. The existing driver selects 128xfs automatically for some lower samples rates. By using an additional mclk_div divider, it is now possible to control the behaviour. This allows using 256xfs PLL frequency on all sample rates up to 96kHz. It should allow lower jitter and better signal quality. The behavior has to be controlled by the sound card driver, because some sample frequency share the same setting. e.g. 192kHz and 96kHz use 24.576MHz master clock. The only difference is the MCLK divider. This also added support for 32bit data. Signed-off-by: Daniel Matuschek <daniel@matuschek.net>
commit 1e92919 upstream. Since the statistics handler is asynchrous, it can very well be that we will handle the statistics (hence the RSSI fluctuation) when we already disassociated. Don't WARN on this case. This solves: https://bugzilla.redhat.com/show_bug.cgi?id=1071998 Fixes: 2b76ef1 ("iwlwifi: mvm: implement reduced Tx power") Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d7d5da upstream. Use CONFIG_ARCH_PHYS_ADDR_T_64BIT to determine if ignoring or truncating of memory banks is neccessary. This may be needed in the case of 64-bit memory bank addresses but when phys_addr_t is kept 32-bit. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Wang Nan <wangnan0@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 571b143 upstream. If the kernel is loaded higher in physical memory than normal, and we calculate PHYS_OFFSET higher than the start of RAM, this leads to boot problems as we attempt to map part of this RAM into userspace. Rather than struggle with this, just truncate the mapping. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Wang Nan <wangnan0@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5159d76 upstream. There are a handful of uses of list_empty() for cmd->i_conn_node within iser-target code that expect to return false once a cmd has been removed from the per connect list. This patch changes all uses of list_del -> list_del_init in order to ensure that list_empty() returns false as expected. Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: <stable@vger.kernel.org> raspberrypi#3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit defd884 upstream. This patch addresses a couple of different hug shutdown issues related to wait_event() + isert_conn->state. First, it changes isert_conn->conn_wait + isert_conn->conn_wait_comp_err from waitqueues to completions, and sets ISER_CONN_TERMINATING from within isert_disconnect_work(). Second, it splits isert_free_conn() into isert_wait_conn() that is called earlier in iscsit_close_connection() to ensure that all outstanding commands have completed before continuing. Finally, it breaks isert_cq_comp_err() into seperate TX / RX related code, and adds logic in isert_cq_rx_comp_err() to wait for outstanding commands to complete before setting ISER_CONN_DOWN and calling complete(&isert_conn->conn_wait_comp_err). Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b6b87a1 upstream. This patch fixes the incorrect setting of ->post_send_buf_count related to RDMA WRITEs + READs where isert_rdma_rw->send_wr_num was not being taken into account. This includes incrementing ->post_send_buf_count within isert_put_datain() + isert_get_dataout(), decrementing within __isert_send_completion() + isert_response_completion(), and clearing wr->send_wr_num within isert_completion_rdma_read() This is necessary because even though IB_SEND_SIGNALED is not set for RDMA WRITEs + READs, during a QP failure event the work requests will be returned with exception status from the TX completion queue. Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8993531 upstream. Before commit b355cee (ACPI / resources: ignore invalid ACPI device resources), if acpi_dev_resource_memory()/acpi_dev_resource_io() returns false, it means the the resource is not a memeory/IO resource. But after commit b355cee, those functions return false if the given memory/IO resource entry is invalid (the length of the resource is zero). This breaks pnpacpi_allocated_resource(), because it now recognizes the invalid memory/io resources as resources of unknown type. Thus users see confusing warning messages on machines with zero length ACPI memory/IO resources. Fix the problem by rearranging pnpacpi_allocated_resource() so that it calls acpi_dev_resource_memory() for memory type and IO type resources only, respectively. Fixes: b355cee (ACPI / resources: ignore invalid ACPI device resources) Signed-off-by: Zhang Rui <rui.zhang@intel.com> Reported-and-tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Reported-and-tested-by: Julian Wollrath <jwollrath@web.de> Reported-and-tested-by: Paul Bolle <pebolle@tiscali.nl> [rjw: Changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ns_wait variable is intended to hold a lower bound on the number of nanoseconds that have elapsed since the last sdhci register write. However, the actual calculation of it was incorrect, as the subtraction was inverted. This commit fixes the calculation. Note that this correction has no bearing when running with the default cycle_delay of 2 and the default clock rate of 50 MHz, under which conditions ns_2clk is 40 nanoseconds and ns_wait, regardless of whether the subtraction is done correctly or incorrectly, cannot possibly be less than 40 except for during the one-microsecond period just before the tick counter wraps around to meet last_write_hpt (i.e., approximately 4295 seconds after the preceding sdhci register write). The correction in this commit only comes into play if ns_2clk > 1000, which requires a cycle_delay of 51 or greater when using the default clock rate. Under those conditions, sdhci_bcm2708_raw_writel will not wait for the full cycle_delay count if at least 1000 nanoseconds have elapsed since the last register write.
fix sign in sdhci_bcm2708_raw_writel wait calculation
Adds support for V4L2_CID_RED_BALANCE and V4L2_CID_BLUE_BALANCE. Only has an effect if V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has V4L2_WHITE_BALANCE_MANUAL selected. Signed-off-by: Dave Stevenson <dsteve@broadcom.com>
This is so that the correct rabge of values as specified with the SOC_DOUBLE_R_RANGE_TLV macro are sent to the hardware for both the normal and invert cases.
This allows limiting the output gain to avoid clipping in the DAC ouput stages.
…OUBLE_R_RANGE_TLV support
Add IQaudIO Sound Card support for Raspberry Pi
Adds YVU420 (YV12), YVU420SP (NV21), and BGR888. Signed-off-by: Dave Stevenson <dsteve@broadcom.com>
This commit removes the previous FIQ fixes entirely and adds fiq_fsm. This rewrite features much more complete support for split transactions and takes into account several OTG hardware bugs. High-speed isochronous transactions are also capable of being performed by fiq_fsm. All driver options have been removed and replaced with: - dwc_otg.fiq_enable (bool) - dwc_otg.fiq_fsm_enable (bool) - dwc_otg.fiq_fsm_mask (bitmask) - dwc_otg.nak_holdoff (unsigned int) Defaults are specified such that fiq_fsm behaves similarly to the previously implemented FIQ fixes.
If local_fiq_enable() is called before a local_irq_restore(flags) where the flags variable has the F bit set, the FIQ will be erroneously disabled. Fixup arch_local_irq_restore to avoid trampling the F bit in CPSR. Also fix some of the hacks previously implemented for previous dwc_otg incarnations.
If the transfer associated with a QTD failed due to a bus error, the HCD would retry the transfer up to 3 times (implementing the USB2.0 three-strikes retry in software). Due to the masking mechanism used by fiq_fsm, it is only possible to pass a single interrupt through to the HCD per-transfer. In this instance host channels would fall off the radar because the error reset would function, but the subsequent channel halt would be lost. Push the error count reset into the FIQ handler.
i2cfix-3.10.y to stay current.
that went in after I forked for the I2C changes. This commit applies the missing part of that bug fix.
|
@jjackowski, @popcornmix if this PR is not going to be merged, then there is no point in having it 'hanging around'. Please close it, if it is not going to be merged... |
|
This PR should be closed as it points to 3.10 and therefore it will never get merged. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
I changed the i2c master such that repeated starts can be used. It requires polling, so I limited their use to mostly SMBus. Some other non-SMBus cases will also use repeated starts, but only when doing so is allowed by i2c. I tested it with a MLX90614 (an infrared thermometer using SMBus) and a BMP085 (pressure and temperature sensor using I2C) on the same bus.