Fork of https://github.com/PaulStoffregen/Tlc5940 with ESP32 support
Tested on ESP32, but should work on ESP32-S2, S3, etc. with no or minimal mods Requires the following board support package in Arduino IDE (Tools -> Board -> Boards Manager…): esp32 by Espressif Systems
DOT Correction can be set for each channel individually. Animation doesn't work as PROGMEM snippets for ESP32 were not finished.
16 channel PWM LED driver based on the Texas Instruments TLC5940 chip.
http://www.pjrc.com/teensy/td_libs_Tlc5940.html
http://code.google.com/p/tlc5940arduino/
http://playground.arduino.cc/Learning/TLC5940
https://github.com/PaulStoffregen/Tlc5940
The TLC5940 chip SCK pin is sensitive to signal overshoot. When used with Teensy 4.0 or other high speed hardware, especially if using long wires, you may need to add a resistor inline with the SCLK signal.
https://forum.pjrc.com/threads/71009?p=323766&viewfull=1#post323766