Iteration 1 changes:

1. Flipping the stl in slic3r mirrored it. Do the flipping in OpenSCAD.

*2) Vent slots need to be re-thought to be easier to print cleanly

*3) HDMI hole needs to be slightly longer

*4) Round audio hole was not bridged at top - maybe leave open for easier installation ?

*5) Ethernet hole moved down slightly, bigger

*6) USB hole 2.5 mm longer in the direction of the ethernet

*7) Camera holder slightly larger in width, lens hole slightly wider

*8) Interior main hole slightly wider

*9) USB power hole lower and taller

10. Connecting tabs interfere - only at corners ? (fixed by not mirroring)

11. Stand-off tabs on the bottom are ok

*12) Camera cable slot slightly wider