-
Notifications
You must be signed in to change notification settings - Fork 100
Schedule Setup
Ensure you have setup your Zones before creating a Schedule. To create a schedule click the "Schedules" button on the main screen. On the schedules screen click the "+ Add" button in the top right corner.
After creating your schedule make sure you enable "Run Schedules" on the main screen. Also, anytime you use "Manual" control to turn on a zone "Run Schedules" will be disabled.
A screenshot of the schedule settings screen is below:
Name: Name of this schedule for reference later.
Enabled: Schedule will not run unless enabled.
Type: Select schedule mode:
- Day: Choose which days of the week to run
- Interval: Schedule will run every N days. Where N is the number in the Interval field that appears.
Time 1-4: Schedule will run at each enabled time on every enabled day / every interval.
Zone Durations: How long to run each zone every time the schedule runs. Zones run sequentially. Keep this in mind when selecting times to run. The maximum zone duration is 255 minutes.
NOTE: Setting a duration close to 255 is not recommended if you are using weather adjustments, because it will be unable to scale past 100% on hot/dry days. Instead, it's recommended to leave some head room and schedule multiple run times that add up to your desired total.
Weather Adjust: When enabled will use weather data configured on the settings page to adjust watering times based on temperature, humidity, and rainfall.