Example types of inputs that may be utilized between all of the product lines
| Name | Type | Description |
|---|---|---|
| Opening Width | FLOAT | Width measurement in inches |
| Opening Height | FLOAT | Height measurement in inches |
| Series | ENUM | Customer requested series: {ATE, ASE, ETE, ESE, HATE, HASE, HGTE, HGSE, LETE, LESE, PTE, PSE, PTETE, PTESE, PRETE, PRESE, SE, TE, TTE, TSE, TETE, TESE} |
| Towel Bar | ENUM | Customer requested towel bar: {18", 24"} |
| Finger Pull | ENUM | Customer requested finger pull: {STANDARD, RECESSED} |
| Clear Sweep | BOOLEAN | Customer requested for clear sweep |
| Configuration | ENUM | Customer requested configuration (Names not official): {ONE INLINE PANEL, TWO INLINE PANEL, TWO PARTIAL INLINE PANEL, 90 DEGREE RETURN PANEL, 135 DEGREE RETURN PANEL, NOTCHED INLINE PANEL, NEO PANEL} |
| Item Number | INT | Customer requested item number |
Example types of output that may be calculated between all of the product lines
| Name | Type | Description |
|---|---|---|
| Resulting Width | FLOAT | Resulting width after calculations |
| Resulting Height | FLOAT | Resulting height after calcuations |
| In Stock | BOOLEAN | Whether or not the resulting dimensions are available in a stock piece |
| Hole Placement | COORDINATE[] | A list of locations of holes (x,y) to be placed |
| Hole Size | FLOAT | The size of holes to be placed |
| Wall Jamb | ENUM | Resulting wall jamb piece to be used: {ZD1028, ZD1006} |
A separate configuration file is used to store all measurements of stock glass for each product line.
When defining a product line, the user must also define which lines of stock glass it should compare its resulting measurements with. Once the glass size estimations are completed, a seperate checkbox will be used to indicate whether a stock piece can be used instead.
All states of operations that will be utilized in the logic for all product lines
| States | Description |
|---|---|
| float SetValue(float value) | Set the current value in the pipeline to the given value |
| float SetEnum(string value, string category) | Set the current value in the pipeline to the given value |
| float SetConditional(bool value) | Set the current value in the pipeline to the given value |
| float Addition(float value) | Add the given value to the current value in the pipeline |
| float Subtraction(float value) | Subtract the given value from the current value in the pipeline |
| float Multiplication(float value) | Multiply the given value by the current value in the pipeline |
| float Division(float value) | Divide the given value to the desired value by the current value in the pipeline |
| float RoundUp(Float Interval) | Round up the current value in the pipeline to the next available cutoff (i.e. Next 1/2" or next whole number) |
| float RoundDown(Float Interval) | Round down the current value in the pipeline to the next available cutoff (i.e. Next 1/2" or next whole number) |
| void Branch(int nextStep) | Branch to another path |
| void BranchConditional(string ConditionalName, bool qualifier, int nextStep) | Branch to another path if the current boolean in the pipeline is true/false in the list |
| void BranchSeries(String[] Series, bool qualifier, int nextStep) | Branch to another path if the current series in the pipeline is included/not included in the list |
| void BranchConfiguration(String[] Configuration, bool qualifier, int nextStep) | Branch to another path if the current configuration in the pipeline is included/not included in the list |
| void BranchValue(float minimum, float maximum, bool qualifier, int nextStep) | Branch to another path if the current value in the pipeline is included /not included within the given range (inclusive) |
| void BranchFractionalValue(float minimum, float maximum, bool qualifier, int nextStep) | Branch to another path if the current value's fractional value in the pipeline is included /not included within the given range (inclusive) |
| float Truncate() | Truncate the current value in the pipeline |
| void End() | Signals the end of the logic and flags the current value in the pipeline to be final |
All types and their corresponding UI element
| Type | Corresponding Element |
|---|---|
| FLOAT | Text Area |
| INT | Text Area |
| ENUM | Dropdown List (input) / Text Area (output) |
| BOOLEAN | Checkbox |
{
"ProductLines": [
{
"Name": "Stock Cardinal Series Semi-frameless Single Doors",
"Input": [
{
"Name": "OpeningWidth",
"Type": "Float"
},
{
"Name": "OpeningHeight",
"Type": "Float"
},
{
"Name": "ClearSweep",
"Type": "Boolean"
},
{
"Name": "TwoHoles",
"Type": "Boolean"
}
],
"Output": [
{
"Name": "ResultingWidth",
"Type": "Float",
"Input": "OpeningWidth"
},
{
"Name": "ResultingHeight",
"Input": "OpeningHeight",
"Type": "Float"
},
{
"Name": "WallJamb",
"Input": "OpeningWidth",
"Type": "Enum"
}
],
"Logic": {
"ResultingWidth": [
{
"Operation": "BranchInputValue",
"Minimum": 66.625,
"Maximum": 66.625,
"NextState": 4,
"Qualifier": true,
"InputName": "OpeningHeight"
},
{
"Operation": "BranchInputValue",
"Minimum": 69.625,
"Maximum": 69.625,
"NextState": 4,
"Qualifier": true,
"InputName": "OpeningHeight"
},
{
"Operation": "BranchInputValue",
"Minimum": 72.625,
"Maximum": 72.625,
"NextState": 4,
"Qualifier": true,
"InputName": "OpeningHeight"
},
{
"Operation": "Branch",
"NextState": 16
},
{
"Operation": "BranchFractionalValue",
"Minimum": 0,
"Maximum": 0.125,
"NextState": 7,
"Qualifier": true
},
{
"Operation": "BranchFractionalValue",
"NextState": 9,
"Minimum": 0.1875,
"Maximum": 0.6875,
"Qualifier": true
},
{
"Operation": "BranchFractionalValue",
"NextState": 11,
"Minimum": 0.75,
"Maximum": 1,
"Qualifier": true
},
{
"Operation": "RoundDown",
"Interval": 1
},
{
"Operation": "Branch",
"NextState": 13
},
{
"Operation": "Truncate"
},
{
"Operation": "Branch",
"NextState": 13
},
{
"Operation": "RoundUp",
"Interval": 1
},
{
"Operation": "Branch",
"NextState": 13
},
{
"Operation": "Subtraction",
"Value": 4
},
{
"Operation": "Addition",
"Value": 0.8125
},
{
"Operation": "Branch",
"NextState": 17
},
{
"Operation": "Subtraction",
"Value": 3.5
},
{
"Operation": "End"
}
],
"ResultingHeight": [
{
"Operation": "Subtraction",
"Value": 1.625
},
{
"Operation": "BranchConditional",
"ConditionalName": "ClearSweep",
"Qualifier": false,
"NextState": 3
},
{
"Operation": "Addition",
"Value": 0.75
},
{
"Operation": "End"
}
],
"WallJamb": [
{
"Operation": "BranchInputValue",
"Minimum": 66.625,
"Maximum": 66.625,
"NextState": 4,
"Qualifier": true,
"InputName": "OpeningHeight"
},
{
"Operation": "BranchInputValue",
"Minimum": 69.625,
"Maximum": 69.625,
"NextState": 4,
"Qualifier": true,
"InputName": "OpeningHeight"
},
{
"Operation": "BranchInputValue",
"Minimum": 72.625,
"Maximum": 72.625,
"NextState": 4,
"Qualifier": true,
"InputName": "OpeningHeight"
},
{
"Operation": "Branch",
"NextState": 9
},
{
"Operation": "BranchFractionalValue",
"NextState": 7,
"Minimum": 0,
"Maximum": 0.125,
"Qualifier": true
},
{
"Operation": "BranchFractionalValue",
"Minimum": 0.1875,
"Maximum": 0.6875,
"NextState": 9,
"Qualifier": true
},
{
"Operation": "BranchFractionalValue",
"Minimum": 0.75,
"Maximum": 1,
"NextState": 7,
"Qualifier": true
},
{
"Operation": "SetEnum",
"Value": "ZD1028",
"Category": "WallJamb"
},
{
"Operation": "Branch",
"NextState": 11
},
{
"Operation": "SetEnum",
"Value": "ZD1006",
"Category": "WallJamb"
},
{
"Operation": "Branch",
"NextState": 11
},
{
"Operation": "End"
}
]
},
"Category": "Door"
}
]
}
"Door_Glass_69_Stall_3/16_Clear": [
{
"Width": 18.8125,
"Height": 65
},
{
"Width": 19.8125,
"Height": 65
},
{
"Width": 20.8125,
"Height": 65
},
{
"Width": 21.8125,
"Height": 65
},
{
"Width": 22.8125,
"Height": 65
},
{
"Width": 23.8125,
"Height": 65
},
{
"Width": 24.8125,
"Height": 65
},
{
"Width": 25.8125,
"Height": 65
},
{
"Width": 26.8125,
"Height": 65
},
{
"Width": 27.8125,
"Height": 65
},
{
"Width": 28.8125,
"Height": 65
},
{
"Width": 29.8125,
"Height": 65
},
{
"Width": 30.8125,
"Height": 65
},
{
"Width": 31.8125,
"Height": 65
},
{
"Width": 32.8125,
"Height": 65
}
]