Use embedded-storage BlockDevice trait.

This will allow both the SD card driver and the FAT32 implementation to
be used with filesystem or block device drivers respectively.

Cargo.toml

@@ -15,6 +15,7 @@ byteorder = {version = "1", default-features = false}
 defmt = {version = "0.3", optional = true}
 embedded-hal = "1.0.0"
 embedded-io = "0.6.1"
+embedded-storage = { git = "https://github.com/qwandor/embedded-storage", branch = "block", default-features = false }
 heapless = "^0.8"
 log = {version = "0.4", default-features = false, optional = true}
 
@@ -28,5 +29,5 @@ sha2 = "0.10"
 
 [features]
 default = ["log"]
-defmt-log = ["dep:defmt"]
+defmt-log = ["dep:defmt", "embedded-storage/defmt"]
 log = ["dep:log"]

examples/linux/mod.rs

@@ -1,7 +1,9 @@
 //! Helpers for using embedded-sdmmc on Linux
 
 use chrono::Timelike;
-use embedded_sdmmc::{Block, BlockCount, BlockDevice, BlockIdx, TimeSource, Timestamp};
+use embedded_sdmmc::{
+    blockdevice::BLOCK_LEN_U64, Block, BlockCount, BlockDevice, BlockIdx, TimeSource, Timestamp,
+};
 use std::cell::RefCell;
 use std::fs::{File, OpenOptions};
 use std::io::prelude::*;
@@ -34,35 +36,39 @@ impl LinuxBlockDevice {
 impl BlockDevice for LinuxBlockDevice {
     type Error = std::io::Error;
 
-    fn read(&self, blocks: &mut [Block], start_block_idx: BlockIdx) -> Result<(), Self::Error> {
+    fn read(
+        &mut self,
+        blocks: &mut [Block],
+        first_block_index: BlockIdx,
+    ) -> Result<(), Self::Error> {
         self.file
             .borrow_mut()
-            .seek(SeekFrom::Start(start_block_idx.into_bytes()))?;
+            .seek(SeekFrom::Start(first_block_index.0 * BLOCK_LEN_U64))?;
         for block in blocks.iter_mut() {
-            self.file.borrow_mut().read_exact(&mut block.contents)?;
+            self.file.borrow_mut().read_exact(block)?;
             if self.print_blocks {
-                println!("Read block {:?}: {:?}", start_block_idx, &block);
+                println!("Read block {:?}: {:?}", first_block_index, &block);
             }
         }
         Ok(())
     }
 
-    fn write(&self, blocks: &[Block], start_block_idx: BlockIdx) -> Result<(), Self::Error> {
+    fn write(&mut self, blocks: &[Block], first_block_index: BlockIdx) -> Result<(), Self::Error> {
         self.file
             .borrow_mut()
-            .seek(SeekFrom::Start(start_block_idx.into_bytes()))?;
+            .seek(SeekFrom::Start(first_block_index.0 * BLOCK_LEN_U64))?;
         for block in blocks.iter() {
-            self.file.borrow_mut().write_all(&block.contents)?;
+            self.file.borrow_mut().write_all(block)?;
             if self.print_blocks {
                 println!("Wrote: {:?}", &block);
             }
         }
         Ok(())
     }
 
-    fn num_blocks(&self) -> Result<BlockCount, Self::Error> {
+    fn block_count(&self) -> Result<BlockCount, Self::Error> {
         let num_blocks = self.file.borrow().metadata().unwrap().len() / 512;
-        Ok(BlockCount(num_blocks as u32))
+        Ok(BlockCount(num_blocks))
     }
 }
 

src/blockdevice.rs

@@ -3,88 +3,27 @@
 //! Generic code for handling block devices, such as types for identifying
 //! a particular block on a block device by its index.
 
+use embedded_storage::block::{BlockCount, BlockDevice, BlockIdx};
+
 /// A standard 512 byte block (also known as a sector).
 ///
 /// IBM PC formatted 5.25" and 3.5" floppy disks, IDE/SATA Hard Drives up to
 /// about 2 TiB, and almost all SD/MMC cards have 512 byte blocks.
 ///
 /// This library does not support devices with a block size other than 512
 /// bytes.
-#[derive(Clone)]
-pub struct Block {
-    /// The 512 bytes in this block (or sector).
-    pub contents: [u8; Block::LEN],
-}
-
-impl Block {
-    /// All our blocks are a fixed length of 512 bytes. We do not support
-    /// 'Advanced Format' Hard Drives with 4 KiB blocks, nor weird old
-    /// pre-3.5-inch floppy disk formats.
-    pub const LEN: usize = 512;
-
-    /// Sometimes we want `LEN` as a `u32` and the casts don't look nice.
-    pub const LEN_U32: u32 = 512;
+pub type Block = [u8; BLOCK_LEN];
 
-    /// Create a new block full of zeros.
-    pub fn new() -> Block {
-        Block {
-            contents: [0u8; Self::LEN],
-        }
-    }
-}
+/// All our blocks are a fixed length of 512 bytes. We do not support
+/// 'Advanced Format' Hard Drives with 4 KiB blocks, nor weird old
+/// pre-3.5-inch floppy disk formats.
+pub const BLOCK_LEN: usize = 512;
 
-impl core::ops::Deref for Block {
-    type Target = [u8; 512];
-    fn deref(&self) -> &[u8; 512] {
-        &self.contents
-    }
-}
+/// Sometimes we want `LEN` as a `u32` and the casts don't look nice.
+pub const BLOCK_LEN_U32: u32 = 512;
 
-impl core::ops::DerefMut for Block {
-    fn deref_mut(&mut self) -> &mut [u8; 512] {
-        &mut self.contents
-    }
-}
-
-impl core::fmt::Debug for Block {
-    fn fmt(&self, fmt: &mut core::fmt::Formatter) -> core::fmt::Result {
-        writeln!(fmt, "Block:")?;
-        for line in self.contents.chunks(32) {
-            for b in line {
-                write!(fmt, "{:02x}", b)?;
-            }
-            write!(fmt, " ")?;
-            for &b in line {
-                if (0x20..=0x7F).contains(&b) {
-                    write!(fmt, "{}", b as char)?;
-                } else {
-                    write!(fmt, ".")?;
-                }
-            }
-            writeln!(fmt)?;
-        }
-        Ok(())
-    }
-}
-
-impl Default for Block {
-    fn default() -> Self {
-        Self::new()
-    }
-}
-
-/// A block device - a device which can read and write blocks (or
-/// sectors). Only supports devices which are <= 2 TiB in size.
-pub trait BlockDevice {
-    /// The errors that the `BlockDevice` can return. Must be debug formattable.
-    type Error: core::fmt::Debug;
-    /// Read one or more blocks, starting at the given block index.
-    fn read(&self, blocks: &mut [Block], start_block_idx: BlockIdx) -> Result<(), Self::Error>;
-    /// Write one or more blocks, starting at the given block index.
-    fn write(&self, blocks: &[Block], start_block_idx: BlockIdx) -> Result<(), Self::Error>;
-    /// Determine how many blocks this device can hold.
-    fn num_blocks(&self) -> Result<BlockCount, Self::Error>;
-}
+/// Sometimes we want `LEN` as a `u64` and the casts don't look nice.
+pub const BLOCK_LEN_U64: u64 = 512;
 
 /// A caching layer for block devices
 ///
@@ -104,7 +43,7 @@ where
     pub fn new(block_device: D) -> BlockCache<D> {
         BlockCache {
             block_device,
-            block: [Block::new()],
+            block: [[0; BLOCK_LEN]],
             block_idx: None,
         }
     }
@@ -160,112 +99,36 @@ where
     }
 }
 
-/// The linear numeric address of a block (or sector).
-///
-/// The first block on a disk gets `BlockIdx(0)` (which usually contains the
-/// Master Boot Record).
-#[cfg_attr(feature = "defmt-log", derive(defmt::Format))]
-#[derive(Debug, Copy, Clone, PartialEq, Eq, PartialOrd, Ord)]
-pub struct BlockIdx(pub u32);
-
-impl BlockIdx {
-    /// Convert a block index into a 64-bit byte offset from the start of the
-    /// volume. Useful if your underlying block device actually works in
-    /// bytes, like `open("/dev/mmcblk0")` does on Linux.
-    pub fn into_bytes(self) -> u64 {
-        (u64::from(self.0)) * (Block::LEN as u64)
-    }
-
-    /// Create an iterator from the current `BlockIdx` through the given
-    /// number of blocks.
-    pub fn range(self, num: BlockCount) -> BlockIter {
-        BlockIter::new(self, self + BlockCount(num.0))
-    }
-}
-
-impl core::ops::Add<BlockCount> for BlockIdx {
-    type Output = BlockIdx;
-    fn add(self, rhs: BlockCount) -> BlockIdx {
-        BlockIdx(self.0 + rhs.0)
-    }
-}
-
-impl core::ops::AddAssign<BlockCount> for BlockIdx {
-    fn add_assign(&mut self, rhs: BlockCount) {
-        self.0 += rhs.0
-    }
-}
-
-impl core::ops::Sub<BlockCount> for BlockIdx {
-    type Output = BlockIdx;
-    fn sub(self, rhs: BlockCount) -> BlockIdx {
-        BlockIdx(self.0 - rhs.0)
-    }
+/// Convert a block index into a 64-bit byte offset from the start of the
+/// volume. Useful if your underlying block device actually works in
+/// bytes, like `open("/dev/mmcblk0")` does on Linux.
+pub fn block_index_into_bytes(block_index: BlockIdx) -> u64 {
+    block_index.0 * BLOCK_LEN_U64
 }
 
-impl core::ops::SubAssign<BlockCount> for BlockIdx {
-    fn sub_assign(&mut self, rhs: BlockCount) {
-        self.0 -= rhs.0
-    }
-}
-
-/// The a number of blocks (or sectors).
+/// How many blocks are required to hold this many bytes.
 ///
-/// Add this to a `BlockIdx` to get an actual address on disk.
-#[cfg_attr(feature = "defmt-log", derive(defmt::Format))]
-#[derive(Debug, Copy, Clone, PartialEq, Eq, PartialOrd, Ord)]
-pub struct BlockCount(pub u32);
-
-impl core::ops::Add<BlockCount> for BlockCount {
-    type Output = BlockCount;
-    fn add(self, rhs: BlockCount) -> BlockCount {
-        BlockCount(self.0 + rhs.0)
-    }
-}
-
-impl core::ops::AddAssign<BlockCount> for BlockCount {
-    fn add_assign(&mut self, rhs: BlockCount) {
-        self.0 += rhs.0
-    }
-}
-
-impl core::ops::Sub<BlockCount> for BlockCount {
-    type Output = BlockCount;
-    fn sub(self, rhs: BlockCount) -> BlockCount {
-        BlockCount(self.0 - rhs.0)
-    }
-}
-
-impl core::ops::SubAssign<BlockCount> for BlockCount {
-    fn sub_assign(&mut self, rhs: BlockCount) {
-        self.0 -= rhs.0
-    }
-}
-
-impl BlockCount {
-    /// How many blocks are required to hold this many bytes.
-    ///
-    /// ```
-    /// # use embedded_sdmmc::BlockCount;
-    /// assert_eq!(BlockCount::from_bytes(511), BlockCount(1));
-    /// assert_eq!(BlockCount::from_bytes(512), BlockCount(1));
-    /// assert_eq!(BlockCount::from_bytes(513), BlockCount(2));
-    /// assert_eq!(BlockCount::from_bytes(1024), BlockCount(2));
-    /// assert_eq!(BlockCount::from_bytes(1025), BlockCount(3));
-    /// ```
-    pub const fn from_bytes(byte_count: u32) -> BlockCount {
-        let mut count = byte_count / Block::LEN_U32;
-        if (count * Block::LEN_U32) != byte_count {
-            count += 1;
-        }
-        BlockCount(count)
-    }
-
-    /// Take a number of blocks and increment by the integer number of blocks
-    /// required to get to the block that holds the byte at the given offset.
-    pub fn offset_bytes(self, offset: u32) -> Self {
-        BlockCount(self.0 + (offset / Block::LEN_U32))
-    }
+/// ```
+/// # use embedded_sdmmc::blockdevice::{block_count_from_bytes};
+/// # use embedded_storage::block::BlockCount;
+/// assert_eq!(block_count_from_bytes(511), BlockCount(1));
+/// assert_eq!(block_count_from_bytes(512), BlockCount(1));
+/// assert_eq!(block_count_from_bytes(513), BlockCount(2));
+/// assert_eq!(block_count_from_bytes(1024), BlockCount(2));
+/// assert_eq!(block_count_from_bytes(1025), BlockCount(3));
+/// ```
+pub const fn block_count_from_bytes(byte_count: u64) -> BlockCount {
+    let mut count = byte_count / BLOCK_LEN_U64;
+    if (count * BLOCK_LEN_U64) != byte_count {
+        count += 1;
+    }
+    BlockCount(count)
+}
+
+/// Take a number of blocks and increment by the integer number of blocks
+/// required to get to the block that holds the byte at the given offset.
+pub fn block_count_offset_bytes(base: BlockCount, offset: u64) -> BlockCount {
+    BlockCount(base.0 + (offset / BLOCK_LEN_U64))
 }
 
 /// An iterator returned from `Block::range`.

src/fat/bpb.rs

@@ -1,10 +1,11 @@
 //! Boot Parameter Block
 
 use crate::{
-    blockdevice::BlockCount,
+    blockdevice::block_count_from_bytes,
     fat::{FatType, OnDiskDirEntry},
 };
 use byteorder::{ByteOrder, LittleEndian};
+use embedded_storage::block::BlockCount;
 
 /// A Boot Parameter Block.
 ///
@@ -30,8 +31,10 @@ impl<'a> Bpb<'a> {
             return Err("Bad BPB footer");
         }
 
-        let root_dir_blocks =
-            BlockCount::from_bytes(u32::from(bpb.root_entries_count()) * OnDiskDirEntry::LEN_U32).0;
+        let root_dir_blocks = block_count_from_bytes(
+            u64::from(bpb.root_entries_count()) * u64::from(OnDiskDirEntry::LEN_U32),
+        )
+        .0 as u32;
         let non_data_blocks = u32::from(bpb.reserved_block_count())
             + (u32::from(bpb.num_fats()) * bpb.fat_size())
             + root_dir_blocks;
@@ -101,7 +104,7 @@ impl<'a> Bpb<'a> {
     pub fn fs_info_block(&self) -> Option<BlockCount> {
         match self.fat_type {
             FatType::Fat16 => None,
-            FatType::Fat32 => Some(BlockCount(u32::from(self.fs_info()))),
+            FatType::Fat32 => Some(BlockCount(self.fs_info().into())),
         }
     }