-
Notifications
You must be signed in to change notification settings - Fork 69
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Promote powerpc64le-unknown-linux-musl to tier 2 #803
Comments
This issue is not meant to be used for technical discussion. There is a Zulip stream for that. Use this issue to leave procedural comments, such as volunteering to review, indicating that you second the proposal (or third, etc), or raising a concern that you would like to be addressed. Concerns or objections to the proposal should be discussed on Zulip and formally registered here by adding a comment with the following syntax:
Concerns can be lifted with:
See documentation at https://forge.rust-lang.org cc @rust-lang/compiler @rust-lang/compiler-contributors |
It sounds like this target will meet our criteria for tier two @rustbot second |
@rustbot label -final-comment-period +major-change-accepted |
MCP: rust-lang/compiler-team#803 Signed-off-by: Jens Reidel <adrian@travitia.xyz>
MCP: rust-lang/compiler-team#803 Signed-off-by: Jens Reidel <adrian@travitia.xyz>
…musl-tier-2, r=<try> Promote powerpc64le-unknown-linux-musl to tier 2 with host tools MCP: rust-lang/compiler-team#803 I'm using crosstool-ng for building a toolchain because GCC 9 from `musl-toolchain.sh` has float ABI issues (?) and can't compile LLVM, and writing a crosstool-ng config for a target feels less hacky than yet another target specific shell script. I also defined a kernel version, since there wasn't one specified before. If a lower version is desired, just let me know. I also tried to match the rust configure args with the loongarch64 musl tier 2 target. The resulting compiler works fine, built with `DEPLOY=1 ./src/ci/docker/run.sh dist-powerpc64le-linux` and tested on Alpine Linux in a VM and on a bare metal POWER8 machine: ``` qemu-ppc64le:/tmp/rust-nightly-powerpc64le-unknown-linux-musl$ ash install.sh install: creating uninstall script at /usr/local/lib/rustlib/uninstall.sh install: installing component 'rustc' install: installing component 'rust-std-powerpc64le-unknown-linux-musl' install: installing component 'cargo' install: installing component 'rustfmt-preview' install: installing component 'rls-preview' install: installing component 'rust-analyzer-preview' install: installing component 'llvm-tools-preview' install: installing component 'clippy-preview' install: installing component 'miri-preview' install: installing component 'rust-analysis-powerpc64le-unknown-linux-musl' install: installing component 'llvm-bitcode-linker-preview' install: WARNING: failed to run ldconfig. this may happen when not installing as root. run with --verbose to see the error rust installed. qemu-ppc64le:~$ echo 'fn main() { println!("hello world"); }' > test.rs qemu-ppc64le:~$ rustc test.rs qemu-ppc64le:~$ ./test hello world qemu-ppc64le:~$ file test test: ELF 64-bit LSB executable, 64-bit PowerPC or cisco 7500, OpenPOWER ELF V2 ABI, version 1 (SYSV), statically linked, BuildID[sha1]=596ee6abf9add487ebc54fb71c2076fb6faea013, with debug_info, not stripped ``` try-job: dist-powerpc64le-linux
MCP: rust-lang/compiler-team#803 Signed-off-by: Jens Reidel <adrian@travitia.xyz>
MCP: rust-lang/compiler-team#803 Signed-off-by: Jens Reidel <adrian@travitia.xyz>
…musl-tier-2, r=<try> Promote powerpc64le-unknown-linux-musl to tier 2 with host tools MCP: rust-lang/compiler-team#803 I'm using crosstool-ng for building a toolchain because GCC 9 from `musl-toolchain.sh` has float ABI issues (?) and can't compile LLVM, and writing a crosstool-ng config for a target feels less hacky than yet another target specific shell script. I also defined a kernel version, since there wasn't one specified before. If a lower version is desired, just let me know. I also tried to match the rust configure args with the loongarch64 musl tier 2 target. The resulting compiler works fine, built with `DEPLOY=1 ./src/ci/docker/run.sh dist-powerpc64le-linux` and tested on Alpine Linux in a VM and on a bare metal POWER8 machine: ``` qemu-ppc64le:/tmp/rust-nightly-powerpc64le-unknown-linux-musl$ ash install.sh install: creating uninstall script at /usr/local/lib/rustlib/uninstall.sh install: installing component 'rustc' install: installing component 'rust-std-powerpc64le-unknown-linux-musl' install: installing component 'cargo' install: installing component 'rustfmt-preview' install: installing component 'rls-preview' install: installing component 'rust-analyzer-preview' install: installing component 'llvm-tools-preview' install: installing component 'clippy-preview' install: installing component 'miri-preview' install: installing component 'rust-analysis-powerpc64le-unknown-linux-musl' install: installing component 'llvm-bitcode-linker-preview' install: WARNING: failed to run ldconfig. this may happen when not installing as root. run with --verbose to see the error rust installed. qemu-ppc64le:~$ echo 'fn main() { println!("hello world"); }' > test.rs qemu-ppc64le:~$ rustc test.rs qemu-ppc64le:~$ ./test hello world qemu-ppc64le:~$ file test test: ELF 64-bit LSB executable, 64-bit PowerPC or cisco 7500, OpenPOWER ELF V2 ABI, version 1 (SYSV), statically linked, BuildID[sha1]=596ee6abf9add487ebc54fb71c2076fb6faea013, with debug_info, not stripped ``` try-job: dist-powerpc64le-linux
…musl-tier-2, r=<try> Promote powerpc64le-unknown-linux-musl to tier 2 with host tools MCP: rust-lang/compiler-team#803 I'm using crosstool-ng for building a toolchain because GCC 9 from `musl-toolchain.sh` has float ABI issues (?) and can't compile LLVM, and writing a crosstool-ng config for a target feels less hacky than yet another target specific shell script. I also defined a kernel version, since there wasn't one specified before. If a lower version is desired, just let me know. I also tried to match the rust configure args with the loongarch64 musl tier 2 target. The resulting compiler works fine, built with `DEPLOY=1 ./src/ci/docker/run.sh dist-powerpc64le-linux` and tested on Alpine Linux in a VM and on a bare metal POWER8 machine: ``` qemu-ppc64le:/tmp/rust-nightly-powerpc64le-unknown-linux-musl$ ash install.sh install: creating uninstall script at /usr/local/lib/rustlib/uninstall.sh install: installing component 'rustc' install: installing component 'rust-std-powerpc64le-unknown-linux-musl' install: installing component 'cargo' install: installing component 'rustfmt-preview' install: installing component 'rls-preview' install: installing component 'rust-analyzer-preview' install: installing component 'llvm-tools-preview' install: installing component 'clippy-preview' install: installing component 'miri-preview' install: installing component 'rust-analysis-powerpc64le-unknown-linux-musl' install: installing component 'llvm-bitcode-linker-preview' install: WARNING: failed to run ldconfig. this may happen when not installing as root. run with --verbose to see the error rust installed. qemu-ppc64le:~$ echo 'fn main() { println!("hello world"); }' > test.rs qemu-ppc64le:~$ rustc test.rs qemu-ppc64le:~$ ./test hello world qemu-ppc64le:~$ file test test: ELF 64-bit LSB executable, 64-bit PowerPC or cisco 7500, OpenPOWER ELF V2 ABI, version 1 (SYSV), statically linked, BuildID[sha1]=596ee6abf9add487ebc54fb71c2076fb6faea013, with debug_info, not stripped ``` try-job: dist-powerpc64le-linux
…musl-tier-2, r=<try> Promote powerpc64le-unknown-linux-musl to tier 2 with host tools MCP: rust-lang/compiler-team#803 I'm using crosstool-ng for building a toolchain because GCC 9 from `musl-toolchain.sh` has float ABI issues (?) and can't compile LLVM, and writing a crosstool-ng config for a target feels less hacky than yet another target specific shell script. I also defined a kernel version, since there wasn't one specified before. If a lower version is desired, just let me know. I also tried to match the rust configure args with the loongarch64 musl tier 2 target. The resulting compiler works fine, built with `DEPLOY=1 ./src/ci/docker/run.sh dist-powerpc64le-linux` and tested on Alpine Linux in a VM and on a bare metal POWER8 machine: ``` qemu-ppc64le:/tmp/rust-nightly-powerpc64le-unknown-linux-musl$ ash install.sh install: creating uninstall script at /usr/local/lib/rustlib/uninstall.sh install: installing component 'rustc' install: installing component 'rust-std-powerpc64le-unknown-linux-musl' install: installing component 'cargo' install: installing component 'rustfmt-preview' install: installing component 'rls-preview' install: installing component 'rust-analyzer-preview' install: installing component 'llvm-tools-preview' install: installing component 'clippy-preview' install: installing component 'miri-preview' install: installing component 'rust-analysis-powerpc64le-unknown-linux-musl' install: installing component 'llvm-bitcode-linker-preview' install: WARNING: failed to run ldconfig. this may happen when not installing as root. run with --verbose to see the error rust installed. qemu-ppc64le:~$ echo 'fn main() { println!("hello world"); }' > test.rs qemu-ppc64le:~$ rustc test.rs qemu-ppc64le:~$ ./test hello world qemu-ppc64le:~$ file test test: ELF 64-bit LSB executable, 64-bit PowerPC or cisco 7500, OpenPOWER ELF V2 ABI, version 1 (SYSV), statically linked, BuildID[sha1]=596ee6abf9add487ebc54fb71c2076fb6faea013, with debug_info, not stripped ``` try-job: dist-powerpc64le-linux
…musl-tier-2, r=<try> Promote powerpc64le-unknown-linux-musl to tier 2 with host tools MCP: rust-lang/compiler-team#803 I'm using crosstool-ng for building a toolchain because GCC 9 from `musl-toolchain.sh` has float ABI issues (?) and can't compile LLVM, and writing a crosstool-ng config for a target feels less hacky than yet another target specific shell script. I also defined a kernel version, since there wasn't one specified before. If a lower version is desired, just let me know. I also tried to match the rust configure args with the loongarch64 musl tier 2 target. The resulting compiler works fine, built with `DEPLOY=1 ./src/ci/docker/run.sh dist-powerpc64le-linux` and tested on Alpine Linux in a VM and on a bare metal POWER8 machine: ``` qemu-ppc64le:/tmp/rust-nightly-powerpc64le-unknown-linux-musl$ ash install.sh install: creating uninstall script at /usr/local/lib/rustlib/uninstall.sh install: installing component 'rustc' install: installing component 'rust-std-powerpc64le-unknown-linux-musl' install: installing component 'cargo' install: installing component 'rustfmt-preview' install: installing component 'rls-preview' install: installing component 'rust-analyzer-preview' install: installing component 'llvm-tools-preview' install: installing component 'clippy-preview' install: installing component 'miri-preview' install: installing component 'rust-analysis-powerpc64le-unknown-linux-musl' install: installing component 'llvm-bitcode-linker-preview' install: WARNING: failed to run ldconfig. this may happen when not installing as root. run with --verbose to see the error rust installed. qemu-ppc64le:~$ echo 'fn main() { println!("hello world"); }' > test.rs qemu-ppc64le:~$ rustc test.rs qemu-ppc64le:~$ ./test hello world qemu-ppc64le:~$ file test test: ELF 64-bit LSB executable, 64-bit PowerPC or cisco 7500, OpenPOWER ELF V2 ABI, version 1 (SYSV), statically linked, BuildID[sha1]=596ee6abf9add487ebc54fb71c2076fb6faea013, with debug_info, not stripped ``` try-job: dist-powerpc64le-linux
…musl-tier-2, r=<try> Promote powerpc64le-unknown-linux-musl to tier 2 with host tools MCP: rust-lang/compiler-team#803 I'm using crosstool-ng for building a toolchain because GCC 9 from `musl-toolchain.sh` has float ABI issues (?) and can't compile LLVM, and writing a crosstool-ng config for a target feels less hacky than yet another target specific shell script. I also defined a kernel version, since there wasn't one specified before. If a lower version is desired, just let me know. I also tried to match the rust configure args with the loongarch64 musl tier 2 target. The resulting compiler works fine, built with `DEPLOY=1 ./src/ci/docker/run.sh dist-powerpc64le-linux` and tested on Alpine Linux in a VM and on a bare metal POWER8 machine: ``` qemu-ppc64le:/tmp/rust-nightly-powerpc64le-unknown-linux-musl$ ash install.sh install: creating uninstall script at /usr/local/lib/rustlib/uninstall.sh install: installing component 'rustc' install: installing component 'rust-std-powerpc64le-unknown-linux-musl' install: installing component 'cargo' install: installing component 'rustfmt-preview' install: installing component 'rls-preview' install: installing component 'rust-analyzer-preview' install: installing component 'llvm-tools-preview' install: installing component 'clippy-preview' install: installing component 'miri-preview' install: installing component 'rust-analysis-powerpc64le-unknown-linux-musl' install: installing component 'llvm-bitcode-linker-preview' install: WARNING: failed to run ldconfig. this may happen when not installing as root. run with --verbose to see the error rust installed. qemu-ppc64le:~$ echo 'fn main() { println!("hello world"); }' > test.rs qemu-ppc64le:~$ rustc test.rs qemu-ppc64le:~$ ./test hello world qemu-ppc64le:~$ file test test: ELF 64-bit LSB executable, 64-bit PowerPC or cisco 7500, OpenPOWER ELF V2 ABI, version 1 (SYSV), statically linked, BuildID[sha1]=596ee6abf9add487ebc54fb71c2076fb6faea013, with debug_info, not stripped ``` try-job: dist-powerpc64le-linux
…x-musl-tier-2, r=jieyouxu,Urgau,Kobzol Promote powerpc64le-unknown-linux-musl to tier 2 with host tools MCP: rust-lang/compiler-team#803 I'm using crosstool-ng for building a toolchain because GCC 9 from `musl-toolchain.sh` has float ABI issues (?) and can't compile LLVM, and writing a crosstool-ng config for a target feels less hacky than yet another target specific shell script. I also defined a kernel version, since there wasn't one specified before. If a lower version is desired, just let me know. I also tried to match the rust configure args with the loongarch64 musl tier 2 target. The resulting compiler works fine, built with `DEPLOY=1 ./src/ci/docker/run.sh dist-powerpc64le-linux` and tested on Alpine Linux in a VM and on a bare metal POWER8 machine: ``` qemu-ppc64le:/tmp/rust-nightly-powerpc64le-unknown-linux-musl$ ash install.sh install: creating uninstall script at /usr/local/lib/rustlib/uninstall.sh install: installing component 'rustc' install: installing component 'rust-std-powerpc64le-unknown-linux-musl' install: installing component 'cargo' install: installing component 'rustfmt-preview' install: installing component 'rls-preview' install: installing component 'rust-analyzer-preview' install: installing component 'llvm-tools-preview' install: installing component 'clippy-preview' install: installing component 'miri-preview' install: installing component 'rust-analysis-powerpc64le-unknown-linux-musl' install: installing component 'llvm-bitcode-linker-preview' install: WARNING: failed to run ldconfig. this may happen when not installing as root. run with --verbose to see the error rust installed. qemu-ppc64le:~$ echo 'fn main() { println!("hello world"); }' > test.rs qemu-ppc64le:~$ rustc test.rs qemu-ppc64le:~$ ./test hello world qemu-ppc64le:~$ file test test: ELF 64-bit LSB executable, 64-bit PowerPC or cisco 7500, OpenPOWER ELF V2 ABI, version 1 (SYSV), statically linked, BuildID[sha1]=596ee6abf9add487ebc54fb71c2076fb6faea013, with debug_info, not stripped ``` try-job: dist-powerpc64le-linux
…x-musl-tier-2, r=jieyouxu,Urgau,Kobzol Promote powerpc64le-unknown-linux-musl to tier 2 with host tools MCP: rust-lang/compiler-team#803 I'm using crosstool-ng for building a toolchain because GCC 9 from `musl-toolchain.sh` has float ABI issues (?) and can't compile LLVM, and writing a crosstool-ng config for a target feels less hacky than yet another target specific shell script. I also defined a kernel version, since there wasn't one specified before. If a lower version is desired, just let me know. I also tried to match the rust configure args with the loongarch64 musl tier 2 target. The resulting compiler works fine, built with `DEPLOY=1 ./src/ci/docker/run.sh dist-powerpc64le-linux` and tested on Alpine Linux in a VM and on a bare metal POWER8 machine: ``` qemu-ppc64le:/tmp/rust-nightly-powerpc64le-unknown-linux-musl$ ash install.sh install: creating uninstall script at /usr/local/lib/rustlib/uninstall.sh install: installing component 'rustc' install: installing component 'rust-std-powerpc64le-unknown-linux-musl' install: installing component 'cargo' install: installing component 'rustfmt-preview' install: installing component 'rls-preview' install: installing component 'rust-analyzer-preview' install: installing component 'llvm-tools-preview' install: installing component 'clippy-preview' install: installing component 'miri-preview' install: installing component 'rust-analysis-powerpc64le-unknown-linux-musl' install: installing component 'llvm-bitcode-linker-preview' install: WARNING: failed to run ldconfig. this may happen when not installing as root. run with --verbose to see the error rust installed. qemu-ppc64le:~$ echo 'fn main() { println!("hello world"); }' > test.rs qemu-ppc64le:~$ rustc test.rs qemu-ppc64le:~$ ./test hello world qemu-ppc64le:~$ file test test: ELF 64-bit LSB executable, 64-bit PowerPC or cisco 7500, OpenPOWER ELF V2 ABI, version 1 (SYSV), statically linked, BuildID[sha1]=596ee6abf9add487ebc54fb71c2076fb6faea013, with debug_info, not stripped ``` try-job: dist-powerpc64le-linux
…x-musl-tier-2, r=jieyouxu,Urgau,Kobzol Promote powerpc64le-unknown-linux-musl to tier 2 with host tools MCP: rust-lang/compiler-team#803 I'm using crosstool-ng for building a toolchain because GCC 9 from `musl-toolchain.sh` has float ABI issues (?) and can't compile LLVM, and writing a crosstool-ng config for a target feels less hacky than yet another target specific shell script. I also defined a kernel version, since there wasn't one specified before. If a lower version is desired, just let me know. I also tried to match the rust configure args with the loongarch64 musl tier 2 target. The resulting compiler works fine, built with `DEPLOY=1 ./src/ci/docker/run.sh dist-powerpc64le-linux` and tested on Alpine Linux in a VM and on a bare metal POWER8 machine: ``` qemu-ppc64le:/tmp/rust-nightly-powerpc64le-unknown-linux-musl$ ash install.sh install: creating uninstall script at /usr/local/lib/rustlib/uninstall.sh install: installing component 'rustc' install: installing component 'rust-std-powerpc64le-unknown-linux-musl' install: installing component 'cargo' install: installing component 'rustfmt-preview' install: installing component 'rls-preview' install: installing component 'rust-analyzer-preview' install: installing component 'llvm-tools-preview' install: installing component 'clippy-preview' install: installing component 'miri-preview' install: installing component 'rust-analysis-powerpc64le-unknown-linux-musl' install: installing component 'llvm-bitcode-linker-preview' install: WARNING: failed to run ldconfig. this may happen when not installing as root. run with --verbose to see the error rust installed. qemu-ppc64le:~$ echo 'fn main() { println!("hello world"); }' > test.rs qemu-ppc64le:~$ rustc test.rs qemu-ppc64le:~$ ./test hello world qemu-ppc64le:~$ file test test: ELF 64-bit LSB executable, 64-bit PowerPC or cisco 7500, OpenPOWER ELF V2 ABI, version 1 (SYSV), statically linked, BuildID[sha1]=596ee6abf9add487ebc54fb71c2076fb6faea013, with debug_info, not stripped ``` try-job: dist-powerpc64le-linux
MCP: rust-lang/compiler-team#803 Signed-off-by: Jens Reidel <adrian@travitia.xyz>
Proposal
Promote the powerpc64le-unknown-linux-musl target to tier 2.
Musl targets are hard to use with
-Zbuild-std
because they require a full musl sysroot to be available, including an implementation of libunwind. Shipping these in rustup makes them much easier to use.Tier 2 target requirements
This should be the case. ppc64le is a reasonably well supported architecture (e.g. in Fedora, RHEL, Alpine and others) and musl is commonly used for static linkage and containers.
Myself, @famfo and @neuschaefer will be maintaining this target.
This is not much different from all the other musl targets already at tier 2.
This will be included in the PR which adds the target.
This target is for baseline powerpc64le, which is first implemented in the POWER8 series of processors.
Not applicable.
This target supports the full standard library functionality.
The standard codegen backends are used.
Yes.
Yes.
Yes.
No license issues to my knowledge.
Should not cause issues.
Yes.
Yes.
Process
The main points of the Major Change Process are as follows:
@rustbot second
.-C flag
, then full team check-off is required.@rfcbot fcp merge
on either the MCP or the PR.You can read more about Major Change Proposals on forge.
Comments
This issue is not meant to be used for technical discussion. There is a Zulip stream for that. Use this issue to leave procedural comments, such as volunteering to review, indicating that you second the proposal (or third, etc), or raising a concern that you would like to be addressed.
The text was updated successfully, but these errors were encountered: