-
Notifications
You must be signed in to change notification settings - Fork 888
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Stripping extern "Rust"
from functions
#5701
Comments
@Jarcho what version of using the latest master running rustfmt on #[no_mangle]
extern "rust" fn foo() { /* do stuff */ } produces: #[no_mangle]
extern "rust" fn foo() { /* do stuff */
} I believe support for formatting arbitrary extern ABIs was implemented by #4089 and has been available for quite some time. |
Latest version on the playground. Listed as 1.5.2-nightly (2023-02-27 7281249). Playground link showcasing the problem. The cause I assume is from this part of if abi == "Rust" && !is_mod {
Cow::from("")
} Edit: Should have been |
@Jarcho thanks for the clarification and for updating the description. I can confirm that with running #[no_mangle]
extern "Rust" fn foo() { /* do stuff */ } produces: #[no_mangle]
fn foo() { /* do stuff */
} You're also correct about where the issue is coming from: Lines 145 to 146 in 34f9ca2
Given that |
@calebcartwright give that a fix for this would change the behavior of |
Having a bit of déjà vu with this one. Not able to sit down with my dev machine for a while, but if you have bandwidth can you check to see what, if any impact, something like #4293 would have on addressing this? |
@calebcartwright Thanks for pointing that PR out. I can certainly take a look 😁 |
Thanks. IIRC that was going after a different use case, but wonder if the same reasoning can be applied. In general I don't think rustfmt should be doing these types of things, even if it can (i.e. this type of conversion is better suited to something like rustfix imo) |
@calebcartwright I looked into #4293, and I believe that it will prevent rustfmt from removing the explicit Additionally, I'm wonder if there's a clear process for removing or deprecating stable options. After reading through the discussions on the linked PR and the associated issue I feel like we could simplify the implementation of |
Improve diagnostic of `no_mangle_with_rust_abi` fixes #10409 Pending rust-lang/rustfmt#5701 This rewords the message to focus on the error being an implicit ABI, rather than the `Rust` ABI. Also downgrades the suggestion to `MaybeIncorrect` and changes the suggestion span to better highlight the change. --- changelog: None <!-- changelog_checked -->
Here are two paths of behavior this changes: 1. whenever we see an `extern "Rust"` on a function, we don't strip it from the function (which fixes rust-lang#5701) 2. if `force_explicit_abi` is disabled, we preserve what the user has written. Previously, rustfmt would change `extern "C"` to `extern `, which is not something a code formatter should do.
Here are two paths of behavior this changes: 1. whenever we see an `extern "Rust"` on a function, we don't strip it from the function (which fixes rust-lang#5701) 2. if `force_explicit_abi` is disabled, we preserve what the user has written. Previously, rustfmt would change `extern "C"` to `extern `, which is not something a code formatter should do.
Here are two paths of behavior this changes: 1. whenever we see an `extern "Rust"` on a function, we don't strip it from the function (which fixes rust-lang#5701) 2. if `force_explicit_abi` is disabled, we preserve what the user has written. Previously, rustfmt would change `extern "C"` to `extern `, which is not something a code formatter should do.
rust-lang/rust-clippy#10420 got merged, though I think the intention was to wait for this one (it said "Pending ..."), thus the diagnostic's suggestion currently does not work given |
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Technically clippy won't lint if |
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: #967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Link: https://lore.kernel.org/r/20230729220317.416771-2-ojeda@kernel.org
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Yeah, exactly, that was my point, i.e. |
Is the expected behavior that rustfmt shouldn't remove the ABI if |
To address the somewhat more meta topics: While consistency across the landscape of official tools is of course important, clippy does not dictate rustfmt and vice versa. There's a few cases where given a certain input snippet, rustfmt will correctly produce a certain output (as required by the Rust Style Guide which does dictate rustfmt default behavior) that would subsequently be flagged by clippy. In those cases though it's still possible for the user to subsequently apply the clippy fix in a manner that remains compatible with additional rustfmt runs (the two tools aren't dueling, so to speak). The presence or absence of an attribute (regardless of which) shouldn't drive the ABI behavior either. The Style Guide is very explicit about this (https://doc.rust-lang.org/nightly/style-guide/items.html#extern-items), and To be more explicit about my own position: Even though the removal of this particular ABI doesn't technically change the semantics, I still view the current behavior as a bug given what the Style Guide requires (albeit an incredibly long standing one). I'll share this with the Style team to ensure we get the guide updated one way or another, and even if the team decides the removal is the desirable default behavior then we can consider adding a new option to rustfmt to allow users to control the behavior and opt into maintaining the abi. I don't intend to comment on any aspects related to perceptions that this has stalled or is taking too long beyond noting that one way or another I anticipate some action on this soon. |
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Here are two paths of behavior this changes: 1. whenever we see an `extern "Rust"` on a function, we don't strip it from the function (which fixes rust-lang#5701) 2. if `force_explicit_abi` is disabled, we preserve what the user has written. Previously, rustfmt would change `extern "C"` to `extern `, which is not something a code formatter should do.
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Link: https://lore.kernel.org/r/20230729220317.416771-2-ojeda@kernel.org
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Reviewed-by: Trevor Gross <tmgross@umich.edu> Reviewed-by: Gary Guo <gary@garyguo.net> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Link: https://lore.kernel.org/r/20230729220317.416771-2-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Introduced in Rust 1.69.0 [1], this lint prevents forgetting to set the C ABI when using `#[no_mangle]` (or thinking it is implied). For instance, it would have prevented the issue [2] fixed by commit c682e4c ("rust: kernel: Mark rust_fmt_argument as extern "C""). error: `#[no_mangle]` set on a function with the default (`Rust`) ABI --> rust/kernel/print.rs:21:1 | 21 | / unsafe fn rust_fmt_argument( 22 | | buf: *mut c_char, 23 | | end: *mut c_char, 24 | | ptr: *const c_void, 25 | | ) -> *mut c_char { | |________________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#no_mangle_with_rust_abi = note: requested on the command line with `-D clippy::no-mangle-with-rust-abi` help: set an ABI | 21 | unsafe extern "C" fn rust_fmt_argument( | ++++++++++ help: or explicitly set the default | 21 | unsafe extern "Rust" fn rust_fmt_argument( | +++++++++++++ Thus enable it. In rare cases, we may need to use the Rust ABI even with `#[no_mangle]` (e.g. one case, before 1.71.0, would have been the `__rust_*` functions). In those cases, we would need to `#[allow(...)]` the lint, since using `extern "Rust"` explicitly (as the compiler suggests) currently gets overwritten by `rustfmt` [3]. Link: rust-lang/rust-clippy#10347 [1] Link: Rust-for-Linux/linux#967 [2] Link: rust-lang/rustfmt#5701 [3] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Rustfmt currently strips
extern "Rust"
from function signatures. e.g formattingextern "Rust" fn foo() {}
tofn foo() {}
. This seems to be intentional from the current code.The problem here is this essentially deletes documentation from the code. Given a function such as:
With the ABI explicitly added here, it's clear that the odd ABI choice is intentional. Without the explicit ABI, it's unclear whether the choice was intentional, or an ABI was forgotten (e.g.
extern "C"
).Can't find anything relevant from the style guide about this removal.
The text was updated successfully, but these errors were encountered: