Exploring vulnerable C APIs

Overview

This repo is a collection of notes from crackme challenges.

I used three tools:

• a debugger ( gdb with the gef extension )
• a command line disassembler ( radare2 )
• A visual disassembler ( Ghidra )

Don't run these challenges on your normal computer. Either setup a throwaway Virtual Machine or, better still, a Docker Image.

Exploitable APIs

The Internet is full of excellent references to vulnerabilities that can be exploited with C functions. In 2020, C-related vulnerabilities were most of the top 25 issues. Most of the APIs are well known:

• gets -> get user input
• strcpy -> copy a string
• printf -> print formatted strings
• sprintf -> Composes a string with the same text that would be printed
• scanf -> gets user input and then composes a string with the given format

You use these APIs to trigger a Buffer Overflow or Format String Vulnerability. A great background paper on these types of vulnerabilities can be found at Stanford.

Code scanning tools and default Compiler Settings would alert on these insecure function or incorrect usage. Or - like on macOS - the compiler / linker would switch the function for a stricter alternative. But the crackme challenges ensured all safety controls were off.

Finding Reverse Engineering C challenges

Most offer a Virtual Machine so you play without worry.

https://crackmes.one/
https://exploit.education/
https://ropemporium.com/
http://smashthestack.org/
https://www.hackthebox.eu/
https://www.virtualhackinglabs.com/
https://www.vulnhub.com/
https://azeria-labs.com/part-3-stack-overflow-challenges/
https://www.fuzzysecurity.com/tutorials/expDev/1.html
https://samsclass.info/

Write-ups

https://www.lucas-bader.com/ (exploit.education Phoenix)
https://blog.lamarranet.com/index.php/ ( exploit.education Phoenix and ROP Emporium )

References

https://www.coengoedegebure.com/buffer-overflow-attacks-explained/
https://security.web.cern.ch/security/recommendations/en/codetools/c.shtml
https://wiki2.org/en/Buffer_overflow_protection#Clang/LLVM
https://cwe.mitre.org/data/definitions/120.html
https://stackoverflow.com/questions/35659152/stack-based-buffer-overflow-challenge-in-c-using-scanf-with-limited-input

Docker - setup a challenge machine 4 commands

On MacOS, with Docker Desktop installed you could easily find a pre-canned machine. Easy to setup and run. Already have reversing tools pre-installed.

Find image you like

https://hub.docker.com/r/duckll/ctf-box/

pull docker image

docker pull duckll/ctf-box

Run

docker run -idt --name ctf duckll/ctf-box

Start the container

docker start ctf

Start the container with a bash terminal ( cut and paste allowed )

docker container exec -it ctf bash

Extend Container with a 32-bit compiler

Update container

apt-get update

Install multi-architecture compiler

apt install gcc-4.8-multilib

Compile for 32 bit machine

gcc-4.8 -m32 -o format-two-32b format_two.c

Check file format

file format-two-32b # format-two-32b: ELF 32-bit LSB executable

Extend Container to compile ARM code

Install cross-compiler

apt-get install gcc-arm-linux-gnueabi

Extras

apt-get install libc6-armel-cross libc6-dev-armel-cross binutils-arm-linux-gnueabi libncurses5-dev

Required, generic header files

sudo apt-get install gcc-arm-linux-gnueabihf g++-arm-linux-gnueabihf

Compile for arm

arm-linux-gnueabi-gcc -o arm_f2 format_two.c

Setup a Virtual Machine for challenges ( with ARM instructions, on MacOS )

• Get VirtualBox: https://www.virtualbox.org/wiki/Downloads

• Get Ubuntu image: https://ubuntu.com/download/

• Specify minimal Ubuntu installation

• Set Network mode to NAT. Then you can ssh into the Guest VM without an IP Address.

  You will need to set a Port Forwarding rule:

ssh -p 1111 user@localhost

To set the Port Forwarding rule inside of VirtualBox:

Network -> Adapter 1(by default have attached to as NAT) -> Advanced -> Port Forwarding
Host Port: 1111, Guest Port: 22, leave the host IP and guest IP blank

Then confirm it is working on the host machine:

sudo lsof -iTCP -sTCP:LISTEN -n -P    // Check 1111 `Port Forwarding` is running

I would not recommend running the Linux guest in Bridged mode. Although the guest machine get an IP Address on the same subnet - with Bridged mode - your host could hit roadblocks:

• On locked down wifi, your Guest may not be given an IP address.
• If you want to connect in Airplane mode, Bridge mode does not work.
• You have to find your IP address.

VM Hard Disk size

• Set allocated hard disk size to 12-15GB. It defaulted to 10GB, and I ran out of space.
• I moved to a Fixed size Hard Disk, over Dynamically Allocated as it was quicker.
• If you made an error, you could resize with VBoxManage modifyhd /phoenixUbuntu.vdi --resize 15000. After changing disk size, you needed to reallocate space by loading the Guest VM and using gparted.

Reclaim space

On the Virtual Machine, type this:

df -H
Filesystem      Size  Used Avail Use% Mounted on
udev            2.6G     0  2.6G   0% /dev
tmpfs           507M  1.1M  506M   1% /run
/dev/sda1        11G   10G  605M   100% /

sudo apt-get autoclean
sudo apt-get autoremove
sudo apt-get clean

That freed up unused packages in: /var/cache/apt/archives. It gave me space to Boot Ubuntu and use gparted.

Ubuntu Guest

• Check O/S version: lsb_release -d
• Get IP address: ip a
• Check SSH turned on: sudo systemctl status ssh
• Install SSH: sudo apt install openssh-server
• Unblock firewall: sudo ufw allow ssh
• Get ARM emulator apt-get install qemu
• Download the QCOW2 image: https://exploit.education/downloads (AMD64 (also i486))

Prepare the Debugger

Use gef instead of vanilla gdb. The following command silences ASCII related gef errors.

sudo sed -i 's/\\u27a4 />/g' /etc/gdb/gef.py

Run ARM binary

// login to Phoenix
user: user
password: user
/opt/phoenix/arm
./stack_zero

Get Static Analysis tool

$ git clone https://github.com/radare/radare2.git
$ cd radare2
$ ./sys/install.sh

File exchange

// From Host to Guest
scp -P 1111 /Users/../file user@localhost:/home/user/NewFile

// From Guest to Host
scp -r user@192.168.0.78:/opt/phoenix/arm ~/app_binaries

References

http://www.iet.unipi.it/p.perazzo/teaching/cybsec/LAB.01.Phoenix_setup.pdf
https://blog.lamarranet.com/index.php/exploit-education-phoenix-setup/
https://stackabuse.com/how-to-fix-warning-remote-host-identification-has-changed-on-mac-and-linux/
https://en.wikibooks.org/wiki/X86_Assembly/X86_Architecture
https://www.tecmint.com/parted-command-to-create-resize-rescue-linux-disk-partitions/