Skip to content

RunTestsExistingGuest

Lucas Meneghel Rodrigues edited this page Sep 25, 2012 · 1 revision

How to run KVM autotest tests on an existing guest image?

KVM autotest knows how to install guests, and that's all fine, but most of the time, users already have a guest image they are working on, and just want to tell kvm autotest to use it. Also, kvm autotest is a large piece of infrastructure, and it's not really obvious how all the pieces fit together, so some help is required to dispose the available pieces conveniently, so users can accomplish their own testing goals. So, let's get started.

A bit of context on how autotest works

The default upstream configuration file instructs autotest to perform the following tasks:

  1. Install a Linux guest, on this case, Fedora 15, due to the fact it is publicly available, so everybody can try it out. The hardware configuration for the VM:
    • one qcow2 image on an ide bus
    • one network card, model rtl8139
    • two cpus
    • no pci hotplug devices will be attached to this vm
    • Also, the VM is not going to use hugepage memory explicitly
  2. Run a boot test.
  3. Run a shutdown test.
# Runs qemu-kvm, f15 64 bit guest OS, install, boot, shutdown
- @qemu_kvm_f15_quick:
    # We want qemu-kvm for this run
    qemu_binary = /usr/bin/qemu-kvm
    qemu_img_binary = /usr/bin/qemu-img
    only qcow2
    only rtl8139
    only ide
    only smp2
    only no_pci_assignable
    only smallpages
    only Fedora.15.64
    only unattended_install.cdrom, boot, shutdown

This is defined in such a way that the kvm test config system will generate only 3 tests. Let's see at the tests generated. On the kvm test dir $AUTOTEST_ROOT/client/tests/kvm, you can call the configuration parser:

[lmr@freedom kvm]$ ../../common_lib/cartesian_config.py tests.cfg
dict    1:  smp2.Fedora.15.64.unattended_install.cdrom
dict    2:  smp2.Fedora.15.64.boot
dict    3:  smp2.Fedora.15.64.shutdown

You can see on top of the file tests.cfg some includes that point us from where all the test information comes from:

# Copy this file to tests.cfg and edit it.
#
# This file contains the test set definitions. Define your test sets here.
include tests_base.cfg
include cdkeys.cfg
include virtio-win.cfg

tests_base.cfg is a pretty large file, that contains a lot of variants, that are blocks defining tests, vm hardware and pre/post processing directives that control autotest infrastructure behavior. You can check out the definition of each of the variants restricting the test sets (qcow2, rtl8139, smp2, no_pci_assignable, smallpages, Fedora 15.64, unattended_install.cdrom, boot, shutdown) on tests_base.cfg.

About guest install

It is no mystery that for a good deal of the virtualization tests we are going to execute, a guest with an operating system on its disk image is needed. To get this OS there, we have some methods defined:

  1. Install the VM with the OS CDROM through an engine that interacts with the VM using VNC, simulating a human being, called step engine. This engine works surprisingly well, frequently yielding successful installations. However, each step is a point of failure of the whole process, so we moved towards handing the dirty install control to the guest OS itself, as many of them have this capacity.
  2. Install the VM using the automated install mechanisms provided by the guest OS itself. In windows, we have a mechanism called answer files, for Fedora and RHEL we have kickstarts, and for OpenSUSE we have autoyast. Of course, other OS, such as debian, also have their own mechanism, however they are not currently implemented in autotest (hint, hint).

And then an even simpler alternative:

  1. Just copy a known good guest OS image, that was already installed, and use it. This tends to be faster and less error prone, since the install is already done, so we don't need to work on failures on this step. The inevitable question that arises:
  • Q. Hey, why don't you just go with that on the first place?
  • A. Because installing a guest exercises several aspects of the VM, such as disk, network, hardware probing, so on and so forth, so it's a good functional test by itself. Also, installing manually a guest may work well for a single developer working on his/her patches, but certainly does not scale if you need fully automated test done on a regular basis, as there is the need of someone going there and making the install, which seriously, is a waste of human resources. KVM autotest is also a tool for doing such a massively automated test on a regular basis.

Also, this method assumes the least possible for the person running the tests, as they won't need to have preinstalled guests, and because we always get the same vm, with the same capabilities and same configuration. Now that we made this point clear, let's explain how to use your preinstalled guest.

Needed setup for a typical linux guest

KVM autotest relies heavily on cartesian config files. Those files use a flexible file format, defined on [[the file format documentation | KVMAutotest-CartesianConfigParametersIntro]] If you are curious about the defaults assumed for Linux or Windows guests, you can always check the file base.cfg.sample, which contains all our guest definitions (look at the Linux or Windows variant). Without diving too much into it, it's sufficient to say that you need a guest to have a root password of 123456 and an enabled ssh daemon which will allow you to log in as root. The password can be also configured through the config files.

Before you start

  1. Make sure you have the appropriate packages installed. You can read the install prerequesite packages (client section) for more information. For this how to our focus is not to build kvm from git repos, so we are assuming you are going to use the default qemu installed in the system. However, if you are interested in doing so, you might want to recap our docs on [[building qemu-kvm and running unittests | KVMAutotest-RunQemuUnittests]].

Step by step procedure

  1. Git clone autotest to a convenient location, say $HOME/Code/autotest. See the download source documentation. Please do use git and clone the repo to the location mentioned.

  2. Execute the get_started.py script (see [[the get started documentation | KVMAutotest-RunGetStartedScript]]. Since we are going to boot our own guests, you can safely skip each and every iso download possible.

  3. Edit the file tests.cfg. You can see we have a session overriding Custom Guest definitions present on tests_base.cfg. If you want to use a raw block device (see image_raw_device), you can uncomment the lines mentioned on the comments. When image_raw_device = yes, kvm autotest will not append a '.qcow2' extension to the image name. Important: If you opt for a raw device, you must comment out the line that appends a base path to image names (one that looks like image_name(_.*)? ?<= /tmp/kvm_autotest_root/images/)

    CustomGuestLinux:
        # Here you can override the default login credentials for your custom guest
        username = root
        password = 123456
        image_name = custom_image_linux
        image_size = 10G
        # If you want to use a block device as the vm disk, uncomment the 2 lines
        # below, pointing the image name for the device you want
        #image_name = /dev/mapper/vg_linux_guest
        #image_raw_device = yes
    
  4. Some lines below, you will also find this config snippet. This is for the case where you want to specify new base directories for kvm autotest to look images, cdroms and floppies.

    # Modify/comment the following lines if you wish to modify the paths of the
    # image files, ISO files or qemu binaries.
    #
    # As for the defaults:
    # * qemu and qemu-img are expected to be found under /usr/bin/qemu-kvm and
    #   /usr/bin/qemu-img respectively.
    # * All image files are expected under /tmp/kvm_autotest_root/images/
    # * All install iso files are expected under /tmp/kvm_autotest_root/isos/
    # * The parameters cdrom_unattended, floppy, kernel and initrd are generated
    #   by KVM autotest, so remember to put them under a writable location
    #   (for example, the cdrom share can be read only)
    image_name(_.*)? ?<= /tmp/kvm_autotest_root/images/
    cdrom(_.*)? ?<= /tmp/kvm_autotest_root/
    floppy ?<= /tmp/kvm_autotest_root/
    
  5. Change the fields image_name, image_size to your liking. Now, the example test set that uses custom guest configuration can be found some lines below:

    # Runs your own guest image (qcow2, can be adjusted), all migration tests
    # (on a core2 duo laptop with HD and 4GB RAM, F15 host took 3 hours to run)
    # Be warned, disk stress + migration can corrupt your image, so make sure
    # you have proper backups
    - @qemu_kvm_custom_migrate:
        # We want qemu-kvm for this run
        qemu_binary = /usr/bin/qemu-kvm
        qemu_img_binary = /usr/bin/qemu-img
        only qcow2
        only rtl8139
        only ide
        only smp2
        only no_pci_assignable
        only smallpages
        only CustomGuestLinux
        only migrate
    
  6. Since we want to execute this custom migrate test set, we need to look at the last couple of lines of the configuration file:

    # Choose your test list from the testsets defined
    only qemu_kvm_f15_quick
    
  7. This line needs to become

    # Choose your test list from the testsets defined
    only qemu_kvm_custom_migrate
    
  8. Now, if you haven't changed any of the settings of the previous blocks, now our configuration system will run tests with the following expectations:

  • qemu-kvm and qemu are under /usr/bin/qemu-kvm and /usr/bin/qemu-kvm, respectively. Please remember RHEL installs qemu-kvm under ``/usr/libexec``.
  • Our guest image is under /tmp/kvm_autotest_root/images/custom_image_linux.qcow2, since the test set specifies only qcow2.
  • All current combinations for our migrate tests variant will be executed with your custom image. It is never enough to remember that some of the tests can corrupt your qcow2 (or raw) image.
  1. If you want to verify all tests that the config system will generate, you can run the parser to tell you that. This set took 3 hours to run on my development laptop setup.

    [lmr@freedom kvm]$ ../../common_lib/cartesian_config.py tests.cfg
    dict    1:  smp2.CustomGuestLinux.migrate.tcp
    dict    2:  smp2.CustomGuestLinux.migrate.unix
    dict    3:  smp2.CustomGuestLinux.migrate.exec
    dict    4:  smp2.CustomGuestLinux.migrate.mig_cancel
    dict    5:  smp2.CustomGuestLinux.migrate.with_set_speed.tcp
    dict    6:  smp2.CustomGuestLinux.migrate.with_set_speed.unix
    dict    7:  smp2.CustomGuestLinux.migrate.with_set_speed.exec
    dict    8:  smp2.CustomGuestLinux.migrate.with_set_speed.mig_cancel
    dict    9:  smp2.CustomGuestLinux.migrate.with_reboot.tcp
    dict   10:  smp2.CustomGuestLinux.migrate.with_reboot.unix
    dict   11:  smp2.CustomGuestLinux.migrate.with_reboot.exec
    dict   12:  smp2.CustomGuestLinux.migrate.with_reboot.mig_cancel
    dict   13:  smp2.CustomGuestLinux.migrate.with_file_transfer.tcp
    dict   14:  smp2.CustomGuestLinux.migrate.with_file_transfer.unix
    dict   15:  smp2.CustomGuestLinux.migrate.with_file_transfer.exec
    dict   16:  smp2.CustomGuestLinux.migrate.with_file_transfer.mig_cancel
    dict   17:  smp2.CustomGuestLinux.migrate.with_autotest.dbench.tcp
    dict   18:  smp2.CustomGuestLinux.migrate.with_autotest.dbench.unix
    dict   19:  smp2.CustomGuestLinux.migrate.with_autotest.dbench.exec
    dict   20:  smp2.CustomGuestLinux.migrate.with_autotest.dbench.mig_cancel
    dict   21:  smp2.CustomGuestLinux.migrate.with_autotest.stress.tcp
    dict   22:  smp2.CustomGuestLinux.migrate.with_autotest.stress.unix
    dict   23:  smp2.CustomGuestLinux.migrate.with_autotest.stress.exec
    dict   24:  smp2.CustomGuestLinux.migrate.with_autotest.stress.mig_cancel
    dict   25:  smp2.CustomGuestLinux.migrate.with_autotest.monotonic_time.tcp
    dict   26:  smp2.CustomGuestLinux.migrate.with_autotest.monotonic_time.unix
    dict   27:  smp2.CustomGuestLinux.migrate.with_autotest.monotonic_time.exec
    dict   28:  smp2.CustomGuestLinux.migrate.with_autotest.monotonic_time.mig_cancel
    
  2. If you want to make sure kvm autotest is assigning images to the right places, you can tell the config system to print the params contents for each test.

    [lmr@freedom kvm]$ ../../common_lib/cartesian_config.py -c tests.cfg | less
    ... lots of output ...
    
  3. In any of the dicts you should be able to see an image_name key that has something like the below. KVM autotest will only append 'image_format' to this path and then use it, so in the case mentioned, '/tmp/kvm_autotest_root/images/custom_image_linux.qcow2'

    image_name = /tmp/kvm_autotest_root/images/custom_image_linux
    
  4. After you have verified things, you can run autotest using the command line get_started.py has informed you:

    $AUTOTEST_ROOT/client/bin/autotest $AUTOTEST_ROOT/client/tests/kvm/control
    
  5. Profit!

Common questions

  • Q: How do I restrict the test set so it takes less time to run?

  • A: You can look at the output of the cartesian config parser and check out the test combinations. If you look at the output above, and say you want to run only migration + file transfer tests, your test set would look like the below snippet. Make sure you validate your changes calling the parser again.

    # Runs your own guest image (qcow2, can be adjusted), all migration tests
    # (on a core2 duo laptop with HD and 4GB RAM, F15 host took 3 hours to run)
    # Be warned, disk stress + migration can corrupt your image, so make sure
    # you have proper backups
    - @qemu_kvm_custom_migrate:
        # We want qemu-kvm for this run
        qemu_binary = /usr/bin/qemu-kvm
        qemu_img_binary = /usr/bin/qemu-img
        only qcow2
        only rtl8139
        only ide
        only smp2
        only no_pci_assignable
        only smallpages
        only CustomGuestLinux
        only migrate.with_file_transfer
    
    [lmr@freedom kvm]$ ../../common_lib/cartesian_config.py tests.cfg
    dict    1:  smp2.CustomGuestLinux.migrate.with_file_transfer.tcp
    dict    2:  smp2.CustomGuestLinux.migrate.with_file_transfer.unix
    dict    3:  smp2.CustomGuestLinux.migrate.with_file_transfer.exec
    dict    4:  smp2.CustomGuestLinux.migrate.with_file_transfer.mig_cancel
    

Developing your own KVM autotest tests

Since we are working on an easier way to add new tests and contribute them, the adding new test documentation will come next week. Stay tuned!

Please give us feedback on whether this procedure was helpful - email me at lmr AT redhat DOT com.

Clone this wiki locally