Skip to content

schneems/going_the_distance

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

6 Commits
 
 
 
 
 
 
 
 

Repository files navigation

Going the Distance

This contains scripts that do various distance calculations.

Quicklinks

This article and code was built on the backs of giants for more about levenshtein distance check out

Further reading on edit distance:

If you want to learn more about algorithms, check out:

Word Distance

Calculate "distance" between two words where distance is the "cost" it would take to change word B into word A

Dirty

If characters do not match, change them.

Run:

$ ruby lib/dirty_distance.rb far foo
# => 2

This is very quick and requires 0(n) comparisons (only iterates over first string, however it does not take into account every way possible to modify a word. In addition to changing letters, we can also delete and insert letters.

For example the with this algorithm against saturday and sunday you would expect a small number, they both start with s and have similar substrings day but:

$ ruby lib/dirty_distance.rb saturday sunday
# => 7

Ouch. For a more accurate algorithm you can use Levenshtein

Algorithm:

def distance(str1, str2)
  cost = 0
  str1.each_char.with_index do |char, index|
    cost += 1 if str2[index] != char
  end
  cost
end

Levenshtein

Our 3 operations we check for are insertion (adding an extra character), deletion (removing a character), and substitution (changing one character for another). The difficulty of calculating deletion and insertion is that the length of our strings change. Even so this is the basic logic.

We can use this logic, iterate over each set of characters and look for the following scenarios.

  • Match:

Two characters match each other, distance is zero

distance("s", "s")
# => 0

Move on, nothing to see here

  • Deletion:

If the the removing the current character in the provided string matches the next character, this means that we should delete the character.

distance("schneems", "zschneems")
# => 1

Another way to look at this is we compare the substring of "zschneems"[1..-1] and see if it matches the first string. If it does bingo.

  • Insertion

If the removing a charcter from the target string matches the next character (or the whole substring), this means we should add a character

distance("schneems", "chneems")

Here "schneems"[1..-1] matches "chneems" so we should insert a character.

  • Substitution

If a character does not qualify for deletion, addition, and is not a match, by definition we must substitute a character. Another way to look at this is

distance("zchneems", "schneems")

If the first characters do not match "z" != "s" but the substring does

"zchneems"[1..-1] == "schneems"[1..-1]
# => true

Then you've got a substitution on your hands.

To change "sunday" into "saturday" you can do it with insertion

We we INSERT the "at" after the "s"

"sunday" => "satunday"

Now we SUBSTITUTE the "n" for an "r"

"satunday" => "saturday"

Boom, only 3 changes gets us the desired result. The distance between the two words is now 3. Previously the "dirty" method calculated it was 7 which was pretty far off.

Levenshtein - Recursive

With these rules in mind we can get a more accurate result. But how to calculate this? We can compare each sub string for every possible permutation. To do this we can use a recursive algorithm.

The recursive algorithm is simple but dirty. For comparing sunday to saturday it takes 1647 comparison. The value is that it is accurate, while the "dirty" implementation only took 7 iterations, it also produced an incorrect result.

$ ruby lib/levenshtein_recusive.rb saturday sunday
# => 3

Algorithm

def distance(str1, str2)
  return str2.length if str1.empty?
  return str1.length if str2.empty?

  return distance(str1[1..-1], str2[1..-1]) if str1[0] == str2[0] # match
  l1 = distance(str1, str2[1..-1])          # deletion
  l2 = distance(str1[1..-1], str2)          # insertion
  l3 = distance(str1[1..-1], str2[1..-1])   # substitution
  return 1 + [l1,l2,l3].min                 # increment cost
end

If either of the strings is empty, then the distance between the two is the length of the other.

  return str2.length if str1.empty?
  return str1.length if str2.empty?

If the first character matches, we only need to know the distance of the substrings

  return distance(str1[1..-1], str2[1..-1]) if str1[0] == str2[0] # match

If we get past this point, we know we haven't matched, now we can look to see what the distance would be if we deleted one character

  l1 = distance(str1, str2[1..-1])          # deletion

Distance if we add a character

  l2 = distance(str1[1..-1], str2)          # insertion

And the distance of substituting a character

  l3 = distance(str1[1..-1], str2[1..-1])   # substitution

Finally we figure out which of these methods was the cheapest, and add one to it (to account for this iteration), we return that value.

It's a bit confusing to totally wrap your head around, but go back to the deletion/insertion/substitution examples above and it helps.

Levenshtein - Matrix

So the dirty version is fast but not accurate, and the recursive version is accurate but not fast. If we look closely at the recursive algorithm, it looks like we're comparing different versions of substrings. We're also using these substring calculations in our own calculations. Unfortunately we're re-calculating over and over again. This comparison could easily be cached

Comparing 'day' 'ay'

Since we're dealing with two lengths of string we can cache distance calculations in a matrix form.

The result will be O(n*m) calculations where n and m are the lengths of the two strings.

$ levenshtein_matrix saturday sunday
# => 3

If we wanted to change the word sunday to a blank string "" the matrix would look like this:

+---+---+
|   |   |
+---+---+
|   | 0 |
+---+---+
| S | 1 |
+---+---+
| U | 2 |
+---+---+
| N | 3 |
+---+---+
| D | 4 |
+---+---+
| A | 5 |
+---+---+
| Y | 6 |
+---+---+

It would take 6 deletions to turn sunday into "". Similarly with saturday.

+---+---+---+---+---+---+---+---+---+---+
|   |   | S | A | T | U | R | D | A | Y |
+---+---+---+---+---+---+---+---+---+---+
|   | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
+---+---+---+---+---+---+---+---+---+---+

It would take 8 deletions to turn saturday into "". Now we can add one character at a time to see how the rest of the algorithm will work.

Skip - Step

To turn s into saturday we can see we don't need to do anything for the first character since s matches s, we can skip the step:

+---+---+---+
|   |   | S |
+---+---+---+
|   | 0 | 1 |
+---+---+---+
| S | 1 | 0 |
+---+---+---+

This skip will cost the same thing as if we were changing the previous character "" (blank), to the prev target character (also blank)

row_index = 1
column_index = 1
matrix[row_index - 1][column_index - 1]
# => 0

Insertion - Step

Now we add the next target letter. To change s to sa we need to perform an insertion.

+---+---+---+---+
|   |   | S | A |
+---+---+---+---+
|   | 0 | 1 | 2 |
+---+---+---+---+
| S | 1 | 0 |   |
+---+---+---+---+

Another way to look at an insertion is that it will cost the same as if we were targeting s instead of sa plus one. We can calculate the cost for an insertion by looking at the same row, previous column then adding one.

row_index = 1
column_index = 2
matrix[row_index][column_index - 1] + 1
# => 1

We continue with insertions for the rest of the row:

+---+---+---+---+---+---+---+---+---+---+
|   |   | S | A | T | U | R | D | A | Y |
+---+---+---+---+---+---+---+---+---+---+
|   | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
+---+---+---+---+---+---+---+---+---+---+
| S | 1 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
+---+---+---+---+---+---+---+---+---+---+

So the total cost of changing s into saturday would be 7. Next character, let's change su into sa

Deletion

Intellectually we can see turning su into s would take 1 change, a deletion how would we calculate the cost for a deletion?

+---+---+---+
|   |   | S |
+---+---+---+
|   | 0 | 1 |
+---+---+---+
| S | 1 | 0 |
+---+---+---+
| U | 2 |   |
+---+---+---+

If we delete u then the cost of changing su into s is the same as changing s into s + 1 (to account for the deletion action). We already have this information stored in our matrix. We need to get the value of the same column but the previous row and add one to it.

row_index = 2
column_index = 1
matrix[row_index - 1, column_index] + 1
# => 1

The cost to change su to s would be 1 if we delete u.

Substitution

To change su into sa we can substitute the u for an a

+---+---+---+---+
|   |   | S | A |
+---+---+---+---+
|   | 0 | 1 | 2 |
+---+---+---+---+
| S | 1 | 0 | 1 |
+---+---+---+---+
| U | 2 | 1 |   |
+---+---+---+---+

If we are substituting a character, the cost would be the same as the previous string (not including current character) plus 1. This cost is stored in the previous row and previous column.

row_index = 2
column_index = 3
matrix[row_index - 1][column_index - 1]
# => 1

Algorithm

We can now calculate the cost for a deletion, substitution, and insertion. If we calculate all three, the best choice will be the lowest value. We can iterate over the entire matrix until we have calculated every value:

+---+---+---+---+---+---+---+---+---+---+
|   |   | S | A | T | U | R | D | A | Y |
+---+---+---+---+---+---+---+---+---+---+
|   | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
+---+---+---+---+---+---+---+---+---+---+
| S | 1 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
+---+---+---+---+---+---+---+---+---+---+
| U | 2 | 1 | 1 | 2 | 2 | 3 | 4 | 5 | 6 |
+---+---+---+---+---+---+---+---+---+---+
| N | 3 | 2 | 2 | 2 | 3 | 3 | 4 | 5 | 6 |
+---+---+---+---+---+---+---+---+---+---+
| D | 4 | 3 | 3 | 3 | 3 | 4 | 3 | 4 | 5 |
+---+---+---+---+---+---+---+---+---+---+
| A | 5 | 4 | 3 | 4 | 4 | 4 | 4 | 3 | 4 |
+---+---+---+---+---+---+---+---+---+---+
| Y | 6 | 5 | 4 | 4 | 5 | 5 | 5 | 4 | 3 |
+---+---+---+---+---+---+---+---+---+---+

To get the cost of changing any string to another string, we look at

string1 = "sunday"
string2 = "saturday"
matrix[string1.length][string2.length]
# => 3

The neat thing is we don't have to re-calculate any substrings. For example

string1 = "sun"
string2 = "sat"
matrix[string1.length][string2.length]
# => 2

About

Distance Measurements are Awesome!

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages